From: Geert Uytterhoeven <geert+renesas@glider.be> To: Linus Walleij <linus.walleij@linaro.org>, Magnus Damm <magnus.damm@gmail.com>, Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Phong Hoang <phong.hoang.wz@renesas.com>, Takeshi Kihara <takeshi.kihara.df@renesas.com>, linux-gpio@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 0/2] renesas: r8a779g0: Add missing SCIF_CLK2 Date: Thu, 18 Jan 2024 17:32:35 +0100 [thread overview] Message-ID: <cover.1705589612.git.geert+renesas@glider.be> (raw) Hi all, R-Car V4H actually has two SCIF_CLK pins. The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4. The first pin provides the SCIF_CLK signal for the other (H)SCIF instances. This patch series adds the missing SCIF_CLK2 pin group/function to the R-Car V4H pin control driver and to the R-Car V4H DTS file, and fixes the HSCIF2 and SCIF4 DT descriptions to refer to the proper clock. As SCIF_CLK2 cannot be used on the White Hawk development board, I could not test proper operation of HSCIF2 and SCIF4. I did verify that HSCIF2 and SCIF4 do not operate properly when trying to use (the first and thus incorrect) SCIF_CLK as the clock source. I plan to queue these in renesas-pinctrl resp. renesas-devel for v6.9. Thanks for your comments! Geert Uytterhoeven (2): pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++--- drivers/pinctrl/renesas/pfc-r8a779g0.c | 14 ++++++++++++++ 2 files changed, 23 insertions(+), 3 deletions(-) -- 2.34.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Linus Walleij <linus.walleij@linaro.org>, Magnus Damm <magnus.damm@gmail.com>, Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Phong Hoang <phong.hoang.wz@renesas.com>, Takeshi Kihara <takeshi.kihara.df@renesas.com>, linux-gpio@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 0/2] renesas: r8a779g0: Add missing SCIF_CLK2 Date: Thu, 18 Jan 2024 17:32:35 +0100 [thread overview] Message-ID: <cover.1705589612.git.geert+renesas@glider.be> (raw) Hi all, R-Car V4H actually has two SCIF_CLK pins. The second pin provides the SCIF_CLK signal for HSCIF2 and SCIF4. The first pin provides the SCIF_CLK signal for the other (H)SCIF instances. This patch series adds the missing SCIF_CLK2 pin group/function to the R-Car V4H pin control driver and to the R-Car V4H DTS file, and fixes the HSCIF2 and SCIF4 DT descriptions to refer to the proper clock. As SCIF_CLK2 cannot be used on the White Hawk development board, I could not test proper operation of HSCIF2 and SCIF4. I did verify that HSCIF2 and SCIF4 do not operate properly when trying to use (the first and thus incorrect) SCIF_CLK as the clock source. I plan to queue these in renesas-pinctrl resp. renesas-devel for v6.9. Thanks for your comments! Geert Uytterhoeven (2): pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 12 +++++++++--- drivers/pinctrl/renesas/pfc-r8a779g0.c | 14 ++++++++++++++ 2 files changed, 23 insertions(+), 3 deletions(-) -- 2.34.1 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
next reply other threads:[~2024-01-18 16:33 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-01-18 16:32 Geert Uytterhoeven [this message] 2024-01-18 16:32 ` [PATCH 0/2] renesas: r8a779g0: Add missing SCIF_CLK2 Geert Uytterhoeven 2024-01-18 16:32 ` [PATCH 1/2] pinctrl: renesas: r8a779g0: Add missing SCIF_CLK2 pin group/function Geert Uytterhoeven 2024-01-18 16:32 ` Geert Uytterhoeven 2024-01-18 16:32 ` [PATCH 2/2] arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 Geert Uytterhoeven 2024-01-18 16:32 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cover.1705589612.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=phong.hoang.wz@renesas.com \ --cc=takeshi.kihara.df@renesas.com \ --cc=wsa+renesas@sang-engineering.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.