From: Ryder Lee <ryder.lee@mediatek.com> To: Felix Fietkau <nbd@nbd.name>, Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Cc: Roy Luo <royluo@google.com>, YF Luo <yf.luo@mediatek.com>, Yiwei Chung <yiwei.chung@mediatek.com>, Sean Wang <sean.wang@mediatek.com>, <linux-wireless@vger.kernel.org>, <linux-mediatek@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Ryder Lee <ryder.lee@mediatek.com> Subject: [PATCH v1 1/6] mt76: Add paragraphs to describe the config symbols fully Date: Wed, 24 Jul 2019 16:58:15 +0800 [thread overview] Message-ID: <d259e08a5f4c0f0f50f67d6cfc2a6258181e53d4.1563944758.git.ryder.lee@mediatek.com> (raw) In-Reply-To: <cover.1563944758.git.ryder.lee@mediatek.com> Update the help text to fix a checkpatch warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7603/Kconfig | 6 ++++-- drivers/net/wireless/mediatek/mt76/mt7615/Kconfig | 7 ++++++- drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig | 12 ++++++++++-- drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig | 14 +++++++++++--- 4 files changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig index e108bf881ca8..6a0080f1d91c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig @@ -5,6 +5,8 @@ config MT7603E depends on MAC80211 depends on PCI help - This adds support for MT7603E wireless PCIe devices and the WLAN core on - MT7628/MT7688 SoC devices + This adds support for MT7603E wireless PCIe devices and the WLAN core + on MT7628/MT7688 SoC devices. This family supports IEEE 802.11n 2x2 + to 300Mbps PHY rate + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig index 2ed47b309b6e..4cabba9aa2ea 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig @@ -5,4 +5,9 @@ config MT7615E depends on MAC80211 depends on PCI help - This adds support for MT7615-based wireless PCIe devices. + This adds support for MT7615-based wireless PCIe devices, + which support concurrent dual-band operation at both 5GHz + and 2.4GHz, IEEE 802.11ac 4x4:4SS 1733Mbps PHY rate, wave2 + MU-MIMO up to 4 users/group and 160MHz channels. + + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig index 209d8abc49d5..7c88ed8b8f1e 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig @@ -10,7 +10,11 @@ config MT76x0U depends on MAC80211 depends on USB help - This adds support for MT7610U-based wireless USB dongles. + This adds support for MT7610U-based wireless USB 2.0 dongles, + which comply with IEEE 802.11ac standards and support 1x1 + 433Mbps PHY rate. + + To compile this driver as a module, choose M here. config MT76x0E tristate "MediaTek MT76x0E (PCIe) support" @@ -18,4 +22,8 @@ config MT76x0E depends on MAC80211 depends on PCI help - This adds support for MT7610/MT7630-based wireless PCIe devices. + This adds support for MT7610/MT7630-based wireless PCIe devices, + which comply with IEEE 802.11ac standards and support 1x1 + 433Mbps PHY rate. + + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig index 1f69908f8373..5fd4973e32df 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig @@ -8,8 +8,12 @@ config MT76x2E select MT76x2_COMMON depends on MAC80211 depends on PCI - ---help--- - This adds support for MT7612/MT7602/MT7662-based wireless PCIe devices. + help + This adds support for MT7612/MT7602/MT7662-based wireless PCIe + devices, which comply with IEEE 802.11ac standards and support + 2SS to 866Mbit/s PHY rate. + + To compile this driver as a module, choose M here. config MT76x2U tristate "MediaTek MT76x2U (USB) support" @@ -18,4 +22,8 @@ config MT76x2U depends on MAC80211 depends on USB help - This adds support for MT7612U-based wireless USB dongles. + This adds support for MT7612U-based wireless USB 3.0 dongles, + which comply with IEEE 802.11ac standards and support 2SS to + 866Mbit/s PHY rate. + + To compile this driver as a module, choose M here. -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Ryder Lee <ryder.lee@mediatek.com> To: Felix Fietkau <nbd@nbd.name>, Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Cc: Roy Luo <royluo@google.com>, YF Luo <yf.luo@mediatek.com>, Yiwei Chung <yiwei.chung@mediatek.com>, Sean Wang <sean.wang@mediatek.com>, linux-wireless@vger.kernel.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, Ryder Lee <ryder.lee@mediatek.com> Subject: [PATCH v1 1/6] mt76: Add paragraphs to describe the config symbols fully Date: Wed, 24 Jul 2019 16:58:15 +0800 [thread overview] Message-ID: <d259e08a5f4c0f0f50f67d6cfc2a6258181e53d4.1563944758.git.ryder.lee@mediatek.com> (raw) In-Reply-To: <cover.1563944758.git.ryder.lee@mediatek.com> Update the help text to fix a checkpatch warning: WARNING: please write a paragraph that describes the config symbol fully Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7603/Kconfig | 6 ++++-- drivers/net/wireless/mediatek/mt76/mt7615/Kconfig | 7 ++++++- drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig | 12 ++++++++++-- drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig | 14 +++++++++++--- 4 files changed, 31 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig index e108bf881ca8..6a0080f1d91c 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt7603/Kconfig @@ -5,6 +5,8 @@ config MT7603E depends on MAC80211 depends on PCI help - This adds support for MT7603E wireless PCIe devices and the WLAN core on - MT7628/MT7688 SoC devices + This adds support for MT7603E wireless PCIe devices and the WLAN core + on MT7628/MT7688 SoC devices. This family supports IEEE 802.11n 2x2 + to 300Mbps PHY rate + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig index 2ed47b309b6e..4cabba9aa2ea 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt7615/Kconfig @@ -5,4 +5,9 @@ config MT7615E depends on MAC80211 depends on PCI help - This adds support for MT7615-based wireless PCIe devices. + This adds support for MT7615-based wireless PCIe devices, + which support concurrent dual-band operation at both 5GHz + and 2.4GHz, IEEE 802.11ac 4x4:4SS 1733Mbps PHY rate, wave2 + MU-MIMO up to 4 users/group and 160MHz channels. + + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig index 209d8abc49d5..7c88ed8b8f1e 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/Kconfig @@ -10,7 +10,11 @@ config MT76x0U depends on MAC80211 depends on USB help - This adds support for MT7610U-based wireless USB dongles. + This adds support for MT7610U-based wireless USB 2.0 dongles, + which comply with IEEE 802.11ac standards and support 1x1 + 433Mbps PHY rate. + + To compile this driver as a module, choose M here. config MT76x0E tristate "MediaTek MT76x0E (PCIe) support" @@ -18,4 +22,8 @@ config MT76x0E depends on MAC80211 depends on PCI help - This adds support for MT7610/MT7630-based wireless PCIe devices. + This adds support for MT7610/MT7630-based wireless PCIe devices, + which comply with IEEE 802.11ac standards and support 1x1 + 433Mbps PHY rate. + + To compile this driver as a module, choose M here. diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig index 1f69908f8373..5fd4973e32df 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig +++ b/drivers/net/wireless/mediatek/mt76/mt76x2/Kconfig @@ -8,8 +8,12 @@ config MT76x2E select MT76x2_COMMON depends on MAC80211 depends on PCI - ---help--- - This adds support for MT7612/MT7602/MT7662-based wireless PCIe devices. + help + This adds support for MT7612/MT7602/MT7662-based wireless PCIe + devices, which comply with IEEE 802.11ac standards and support + 2SS to 866Mbit/s PHY rate. + + To compile this driver as a module, choose M here. config MT76x2U tristate "MediaTek MT76x2U (USB) support" @@ -18,4 +22,8 @@ config MT76x2U depends on MAC80211 depends on USB help - This adds support for MT7612U-based wireless USB dongles. + This adds support for MT7612U-based wireless USB 3.0 dongles, + which comply with IEEE 802.11ac standards and support 2SS to + 866Mbit/s PHY rate. + + To compile this driver as a module, choose M here. -- 2.18.0
next prev parent reply other threads:[~2019-07-24 8:59 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-07-24 8:58 [PATCH v1 0/6] fix many checkpatch.pl warnings Ryder Lee 2019-07-24 8:58 ` Ryder Lee 2019-07-24 8:58 ` Ryder Lee [this message] 2019-07-24 8:58 ` [PATCH v1 1/6] mt76: Add paragraphs to describe the config symbols fully Ryder Lee 2019-07-24 8:58 ` [PATCH v1 2/6] mt76: mt7603: fix some checkpatch warnings Ryder Lee 2019-07-24 8:58 ` Ryder Lee 2019-07-24 8:58 ` [PATCH v1 3/6] mt76: mt7615: " Ryder Lee 2019-07-24 8:58 ` Ryder Lee 2019-07-24 8:58 ` [PATCH v1 4/6] mt76: mt76x02: " Ryder Lee 2019-07-24 8:58 ` Ryder Lee 2019-07-24 8:58 ` [PATCH v1 5/6] mt76: " Ryder Lee 2019-07-24 8:58 ` Ryder Lee 2019-07-24 11:03 ` Joe Perches 2019-08-20 12:29 ` Felix Fietkau 2019-08-20 12:29 ` Felix Fietkau 2019-07-24 8:58 ` [PATCH v1 6/6] mt76: switch to SPDX tag instead of verbose boilerplate text Ryder Lee 2019-07-24 8:58 ` Ryder Lee
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d259e08a5f4c0f0f50f67d6cfc2a6258181e53d4.1563944758.git.ryder.lee@mediatek.com \ --to=ryder.lee@mediatek.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=lorenzo.bianconi@redhat.com \ --cc=nbd@nbd.name \ --cc=royluo@google.com \ --cc=sean.wang@mediatek.com \ --cc=yf.luo@mediatek.com \ --cc=yiwei.chung@mediatek.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.