From: Stanislav Jakubek <stano.jakubek@gmail.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes Date: Fri, 26 May 2023 21:29:47 +0200 [thread overview] Message-ID: <d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com> (raw) In-Reply-To: <cover.1685127525.git.stano.jakubek@gmail.com> Move some DT "status" properties so that they're the last specified property (before sub-nodes). Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- arch/arm/boot/dts/bcm11351.dtsi | 8 ++++---- arch/arm/boot/dts/bcm21664.dtsi | 6 +++--- arch/arm/boot/dts/bcm23550.dtsi | 6 +++--- arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++---- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index f395e95e0177..773d717de7f0 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -51,42 +51,42 @@ smc@3404c000 { serial@3e000000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e000000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e001000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e001000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e002000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e003000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e003000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; L2: l2-cache@3ff20000 { diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 19ade84e42c1..9e3835a0a7ef 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -51,32 +51,32 @@ smc@3404e000 { serial@3e000000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e000000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e001000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e001000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e002000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; L2: cache-controller@3ff20000 { diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi index ed3ce2fabca6..445eadb8d871 100644 --- a/arch/arm/boot/dts/bcm23550.dtsi +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -129,32 +129,32 @@ slaves@3e000000 { uartb: serial@0 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00000000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uartb2: serial@1000 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00001000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uartb3: serial@2000 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00002000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; bsc1: i2c@16000 { diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index c496e33a71a6..0a8ad1d673d8 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -21,23 +21,23 @@ serial@3e000000 { }; i2c@3e016000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3e017000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3e018000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3500d000 { - status = "okay"; clock-frequency = <100000>; + status = "okay"; pmu: pmu@8 { reg = <0x08>; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Stanislav Jakubek <stano.jakubek@gmail.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes Date: Fri, 26 May 2023 21:29:47 +0200 [thread overview] Message-ID: <d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com> (raw) In-Reply-To: <cover.1685127525.git.stano.jakubek@gmail.com> Move some DT "status" properties so that they're the last specified property (before sub-nodes). Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com> --- arch/arm/boot/dts/bcm11351.dtsi | 8 ++++---- arch/arm/boot/dts/bcm21664.dtsi | 6 +++--- arch/arm/boot/dts/bcm23550.dtsi | 6 +++--- arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++---- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index f395e95e0177..773d717de7f0 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -51,42 +51,42 @@ smc@3404c000 { serial@3e000000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e000000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e001000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e001000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e002000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e003000 { compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e003000 0x1000>; clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB4>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; L2: l2-cache@3ff20000 { diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 19ade84e42c1..9e3835a0a7ef 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -51,32 +51,32 @@ smc@3404e000 { serial@3e000000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e000000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e001000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e001000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; serial@3e002000 { compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart"; - status = "disabled"; reg = <0x3e002000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; L2: cache-controller@3ff20000 { diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi index ed3ce2fabca6..445eadb8d871 100644 --- a/arch/arm/boot/dts/bcm23550.dtsi +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -129,32 +129,32 @@ slaves@3e000000 { uartb: serial@0 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00000000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uartb2: serial@1000 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00001000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uartb3: serial@2000 { compatible = "snps,dw-apb-uart"; - status = "disabled"; reg = <0x00002000 0x118>; clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; bsc1: i2c@16000 { diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index c496e33a71a6..0a8ad1d673d8 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -21,23 +21,23 @@ serial@3e000000 { }; i2c@3e016000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3e017000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3e018000 { - status = "okay"; clock-frequency = <400000>; + status = "okay"; }; i2c@3500d000 { - status = "okay"; clock-frequency = <100000>; + status = "okay"; pmu: pmu@8 { reg = <0x08>; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-05-26 19:29 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-26 19:28 [PATCH 0/6] ARM: dts: bcm-mobile: DT cleanup Stanislav Jakubek 2023-05-26 19:28 ` Stanislav Jakubek 2023-05-26 19:28 ` [PATCH 1/6] ARM: dts: bcm-mobile: change "" includes to <> where applicable Stanislav Jakubek 2023-05-26 19:28 ` Stanislav Jakubek 2023-06-08 22:07 ` Florian Fainelli 2023-06-08 22:07 ` Florian Fainelli 2023-05-26 19:29 ` [PATCH 2/6] ARM: dts: bcm21664/23550: use CCU compatibles directly Stanislav Jakubek 2023-05-26 19:29 ` Stanislav Jakubek 2023-06-08 22:09 ` Florian Fainelli 2023-06-08 22:09 ` Florian Fainelli 2023-06-08 22:09 ` Florian Fainelli 2023-06-08 22:09 ` Florian Fainelli 2023-05-26 19:29 ` Stanislav Jakubek [this message] 2023-05-26 19:29 ` [PATCH 3/6] ARM: dts: bcm-mobile: move status properties to the end of nodes Stanislav Jakubek 2023-06-08 22:09 ` Florian Fainelli 2023-06-08 22:09 ` Florian Fainelli 2023-05-26 19:30 ` [PATCH 4/6] ARM: dts: bcm11351/21664: add UART, I2C node labels Stanislav Jakubek 2023-05-26 19:30 ` Stanislav Jakubek 2023-06-08 22:10 ` Florian Fainelli 2023-06-08 22:10 ` Florian Fainelli 2023-05-26 19:30 ` [PATCH 5/6] ARM: dts: bcm21664-garnet: use " Stanislav Jakubek 2023-05-26 19:30 ` Stanislav Jakubek 2023-06-08 22:10 ` Florian Fainelli 2023-06-08 22:10 ` Florian Fainelli 2023-05-26 19:30 ` [PATCH 6/6] ARM: dts: bcm28155-ap: " Stanislav Jakubek 2023-05-26 19:30 ` Stanislav Jakubek 2023-05-27 13:37 ` kernel test robot 2023-05-27 13:37 ` kernel test robot 2023-06-08 22:11 ` Florian Fainelli 2023-06-08 22:11 ` Florian Fainelli 2023-06-08 22:31 ` Florian Fainelli 2023-06-08 22:31 ` Florian Fainelli 2023-06-18 14:59 ` Stanislav Jakubek 2023-06-18 14:59 ` Stanislav Jakubek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com \ --to=stano.jakubek@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.