From: hkallweit1@gmail.com (Heiner Kallweit) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 06/12] firmware: arm_scpi: improve struct sensor_value Date: Tue, 5 Dec 2017 23:16:58 +0100 [thread overview] Message-ID: <d9278f12-9f3d-66fc-114d-f940388b6cf7@gmail.com> (raw) In-Reply-To: <99220c79-8b35-2978-11d1-6d101ccb6772@gmail.com> lo_val and hi_val together in this order are a little endian 64 bit value. Therefore we can simplify struct sensor_value and the code by defining it as a __le64 value and by using le64_to_cpu. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/firmware/arm_scpi.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 63441e40..4447af48 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -347,9 +347,8 @@ struct _scpi_sensor_info { }; struct sensor_value { - __le32 lo_val; - __le32 hi_val; -} __packed; + __le64 val; +}; struct dev_pstate_set { __le16 dev_id; @@ -777,11 +776,10 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val) return ret; if (scpi_info->is_legacy) - /* only 32-bits supported, hi_val can be junk */ - *val = le32_to_cpu(buf.lo_val); + /* only 32-bits supported, upper 32 bits can be junk */ + *val = le32_to_cpup((__le32 *)&buf.val); else - *val = (u64)le32_to_cpu(buf.hi_val) << 32 | - le32_to_cpu(buf.lo_val); + *val = le64_to_cpu(buf.val); return 0; } -- 2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: hkallweit1@gmail.com (Heiner Kallweit) To: linus-amlogic@lists.infradead.org Subject: [PATCH 06/12] firmware: arm_scpi: improve struct sensor_value Date: Tue, 5 Dec 2017 23:16:58 +0100 [thread overview] Message-ID: <d9278f12-9f3d-66fc-114d-f940388b6cf7@gmail.com> (raw) In-Reply-To: <99220c79-8b35-2978-11d1-6d101ccb6772@gmail.com> lo_val and hi_val together in this order are a little endian 64 bit value. Therefore we can simplify struct sensor_value and the code by defining it as a __le64 value and by using le64_to_cpu. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/firmware/arm_scpi.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 63441e40..4447af48 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -347,9 +347,8 @@ struct _scpi_sensor_info { }; struct sensor_value { - __le32 lo_val; - __le32 hi_val; -} __packed; + __le64 val; +}; struct dev_pstate_set { __le16 dev_id; @@ -777,11 +776,10 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val) return ret; if (scpi_info->is_legacy) - /* only 32-bits supported, hi_val can be junk */ - *val = le32_to_cpu(buf.lo_val); + /* only 32-bits supported, upper 32 bits can be junk */ + *val = le32_to_cpup((__le32 *)&buf.val); else - *val = (u64)le32_to_cpu(buf.hi_val) << 32 | - le32_to_cpu(buf.lo_val); + *val = le64_to_cpu(buf.val); return 0; } -- 2.15.1
next prev parent reply other threads:[~2017-12-05 22:16 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-12-05 21:54 [PATCH 00/12] firmware: arm_scpi: series with smaller improvements Heiner Kallweit 2017-12-05 21:54 ` Heiner Kallweit 2017-12-05 22:16 ` [PATCH 01/12] firmware: arm_scpi: remove two unneeded devm_kfree's in scpi_remove Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit 2017-12-05 22:16 ` [PATCH 02/12] firmware: arm_scpi: make freeing mbox channels device-managed Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit 2017-12-05 22:16 ` [PATCH 03/12] firmware: arm_scpi: make scpi_probe completely device-managed Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit 2017-12-05 22:16 ` [PATCH 04/12] firmware: arm_scpi: improve struct dvfs_info to make code better readable Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit 2017-12-05 22:16 ` [PATCH 05/12] firmware: arm_scpi: improve handling of protocol and firmware version subfields Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit 2017-12-05 22:16 ` Heiner Kallweit [this message] 2017-12-05 22:16 ` [PATCH 06/12] firmware: arm_scpi: improve struct sensor_value Heiner Kallweit 2017-12-05 22:17 ` [PATCH 07/12] firmware: arm_scpi: drop unnecessary type cast to scpi_shared_mem Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2017-12-05 22:17 ` [PATCH 08/12] firmware: arm_scpi: remove all single element structures Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2017-12-05 22:17 ` [PATCH 09/12] firmware: arm_scpi: silence sparse warnings Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2017-12-05 22:17 ` [PATCH 10/12] firmware: arm_scpi: remove struct sensor_capabilities Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2017-12-05 22:17 ` [PATCH 11/12] firmware: arm_scpi: use FIELD_GET/_PREP to simplify macro definitions Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2017-12-05 22:17 ` [PATCH 12/12] firmware: arm_scpi: improve info message for pre-1.0 firmware Heiner Kallweit 2017-12-05 22:17 ` Heiner Kallweit 2018-01-10 16:56 ` [PATCH 00/12] firmware: arm_scpi: series with smaller improvements Sudeep Holla 2018-01-10 16:56 ` Sudeep Holla 2018-01-19 18:04 ` Kevin Hilman 2018-01-19 18:04 ` Kevin Hilman 2018-02-28 16:32 ` Sudeep Holla 2018-02-28 16:32 ` Sudeep Holla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=d9278f12-9f3d-66fc-114d-f940388b6cf7@gmail.com \ --to=hkallweit1@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.