From: Maxime Ripard <mripard@kernel.org>
To: arm@kernel.org, soc@kernel.org
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <mripard@kernel.org>
Subject: [GIT PULL] Allwinner Device Tree Changes for 5.4
Date: Fri, 23 Aug 2019 16:38:06 +0200 [thread overview]
Message-ID: <d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 10501 bytes --]
Hi,
Please pull the following changes for the next release.
Thanks!
Maxime
The following changes since commit 5f9e832c137075045d15cd6899ab0505cfb2ca4b:
Linus 5.3-rc1 (2019-07-21 14:05:38 -0700)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.4-1
for you to fetch changes up to 15ede97054889c0bec09f1f9b71beffecf06fc67:
arm64: dts: allwinner: orange-pi-3: Enable WiFi (2019-08-23 13:50:05 +0200)
----------------------------------------------------------------
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/6JgAKCRDj7w1vZxhR
xc+VAQDjZWvNeMX75qsrz7Jbdy7jlbJJ/oDFBGx3C4clcTn7tgD6AsHeM760Pc6o
4a7G5DGcJakuFGsb1s4hNQOylmG3IQ4=
=pXxO
-----END PGP SIGNATURE-----
----------------------------------------------------------------
Bhushan Shah (2):
dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
arm64: allwinner: h6: add I2C nodes
Chen-Yu Tsai (2):
ARM: dts: sun8i: a83t: Enable HDMI output on Cubietruck Plus
ARM: dts: sunxi: Add mdio bus sub-node to GMAC
Clément Péron (7):
ARM: dts: sunxi: Prefer A31 bindings for IR
ARM: dts: sunxi: Prefer A31 bindings for IR
arm64: dts: allwinner: h6: Add IR receiver node
arm64: dts: allwinner: h6: Enable IR on H6 boards
arm64: dts: allwinner: Add SPDIF node for Allwinner H6
arm64: dts: allwinner: h6: Enable SPDIF for Beelink GS1
arm64: dts: allwinner: Enable DDC regulator for Beelink GS1
Icenowy Zheng (3):
dt-bindings: arm: sunxi: add binding for Lichee Zero Plus core board
ARM: sunxi: dts: s3/s3l/v3: add DTSI files for S3/S3L/V3 SoCs
ARM: dts: sun8i: s3: add devicetree for Lichee zero plus w/ S3
Igors Makejevs (1):
arm64: dts: allwinner: a64: Add IR node
Jernej Skrabec (3):
arm64: dts: allwinner: a64: Enable IR on Orange Pi Win
dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
Maxime Ripard (17):
ARM: dts: sunxi: Switch to the generic PHY properties
ARM: dts: sunxi: Switch from phy to phy-handle
ARM: dts: sunxi: Unify the DE2 bus clocks order
arm64: dts: allwinner: h6: Fix SID node name
ARM: dts: sunxi: Remove simple-panel compatible
ARM: dts: sunxi: Fix the HDMI PHY name
dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
ARM: dts: sun4i: Add missing timers interrupts
ARM: dts: sun5i: Add missing timers interrupts
ARM: dts: sun6i: Add missing timers interrupts
ARM: dts: a23/a33: Change the timers compatible
ARM: dts: a83t: Change the timers compatible
ARM: dts: h3: Change the timers compatible
ARM: dts: v3s: Change the timers compatible
ARM: dts: sun7i: Add CSI0 controller
ARM: dts: sunxi: Add missing watchdog interrupts
ARM: dts: sunxi: Add missing watchdog clocks
Ondrej Jirman (3):
arm64: dts: allwinner: orange-pi-3: Enable HDMI output
arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
arm64: dts: allwinner: orange-pi-3: Enable WiFi
Sunil Mohan Adapa (2):
dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
Documentation/devicetree/bindings/arm/sunxi.yaml | 16 +-
Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml | 3 +-
Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml | 43 ++-
Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml | 76 ++++-
Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt | 59 +---
arch/arm/boot/dts/Makefile | 1 +-
arch/arm/boot/dts/sun4i-a10-a1000.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 2 +-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 2 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 9 +-
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 2 +-
arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 2 +-
arch/arm/boot/dts/sun5i.dtsi | 9 +-
arch/arm/boot/dts/sun6i-a31-colombus.dts | 12 +-
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 18 +-
arch/arm/boot/dts/sun6i-a31-i7.dts | 12 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 12 +-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 12 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 15 +-
arch/arm/boot/dts/sun6i-a31s-cs908.dts | 11 +-
arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 12 +-
arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 18 +-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-bananapro.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-hummingbird.dts | 21 +-
arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-icnova-swac.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-itead-ibox.dts | 4 +-
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 2 +-
arch/arm/boot/dts/sun7i-a20-m3.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-olimex-som204-evb.dts | 20 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 12 +-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 +-
arch/arm/boot/dts/sun7i-a20.dtsi | 35 +-
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 3 +-
arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 2 +-
arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 25 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 14 +-
arch/arm/boot/dts/sun8i-r40.dtsi | 12 +-
arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts | 53 +++-
arch/arm/boot/dts/sun8i-v3.dtsi | 14 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 14 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 12 +-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 +-
arch/arm/boot/dts/sun9i-a80.dtsi | 10 +-
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 15 +-
arch/arm64/boot/dts/allwinner/Makefile | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts | 23 +-
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 4 +-
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 29 +-
arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts | 27 +-
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 72 ++++-
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi | 4 +-
arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts | 4 +-
arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts | 100 +++++-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 135 ++++++-
73 files changed, 937 insertions(+), 289 deletions(-)
create mode 100644 Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
create mode 100644 arch/arm/boot/dts/sun8i-s3-lichee-zero-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-v3.dtsi
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-08-23 14:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 14:38 Maxime Ripard [this message]
2019-09-03 13:57 ` [GIT PULL] Allwinner Device Tree Changes for 5.4 Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost \
--to=mripard@kernel.org \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.