From: Heiner Kallweit <hkallweit1@gmail.com> To: Jerome Brunet <jbrunet@baylibre.com>, Mark Rutland <mark.rutland@arm.com>, Marc Zyngier <marc.zyngier@arm.com>, Linus Walleij <linus.walleij@linaro.org> Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org, linux-gpio@vger.kernel.org Subject: [PATCH 4/5] pintrl: meson: add DT node for GPIO IRQ on Meson 8 / 8b Date: Sun, 7 May 2017 18:34:20 +0200 [thread overview] Message-ID: <da407841-43cc-8797-2289-2bda7474576f@gmail.com> (raw) In-Reply-To: <a4ca587b-d3e8-a22d-4d25-289871d2d095@gmail.com> Add the DT node for GPIO IRQ support on AMlogic Meson 8 and 8b. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- arch/arm/boot/dts/meson8.dtsi | 13 +++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 13 +++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index ebc763ea..bf76a120 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,6 +91,19 @@ clock-frequency = <141666666>; }; + gpio_irq@c1109880 { + compatible = "amlogic,meson-gpio-interrupt", "syscon"; + reg = <0xc1109880 0x10>; + interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>, + <GIC_SPI 65 IRQ_TYPE_NONE>, + <GIC_SPI 66 IRQ_TYPE_NONE>, + <GIC_SPI 67 IRQ_TYPE_NONE>, + <GIC_SPI 68 IRQ_TYPE_NONE>, + <GIC_SPI 69 IRQ_TYPE_NONE>, + <GIC_SPI 70 IRQ_TYPE_NONE>, + <GIC_SPI 71 IRQ_TYPE_NONE>; + }; + pinctrl_cbus: pinctrl@c1109880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 828aa49c..b5a92461 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -183,6 +183,19 @@ status = "disabled"; }; + gpio_irq@c1109880 { + compatible = "amlogic,meson-gpio-interrupt", "syscon"; + reg = <0xc1109880 0x10>; + interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>, + <GIC_SPI 65 IRQ_TYPE_NONE>, + <GIC_SPI 66 IRQ_TYPE_NONE>, + <GIC_SPI 67 IRQ_TYPE_NONE>, + <GIC_SPI 68 IRQ_TYPE_NONE>, + <GIC_SPI 69 IRQ_TYPE_NONE>, + <GIC_SPI 70 IRQ_TYPE_NONE>, + <GIC_SPI 71 IRQ_TYPE_NONE>; + }; + pinctrl_cbus: pinctrl@c1109880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; -- 2.12.2
WARNING: multiple messages have this Message-ID (diff)
From: hkallweit1@gmail.com (Heiner Kallweit) To: linus-amlogic@lists.infradead.org Subject: [PATCH 4/5] pintrl: meson: add DT node for GPIO IRQ on Meson 8 / 8b Date: Sun, 7 May 2017 18:34:20 +0200 [thread overview] Message-ID: <da407841-43cc-8797-2289-2bda7474576f@gmail.com> (raw) In-Reply-To: <a4ca587b-d3e8-a22d-4d25-289871d2d095@gmail.com> Add the DT node for GPIO IRQ support on AMlogic Meson 8 and 8b. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- arch/arm/boot/dts/meson8.dtsi | 13 +++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 13 +++++++++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index ebc763ea..bf76a120 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -91,6 +91,19 @@ clock-frequency = <141666666>; }; + gpio_irq at c1109880 { + compatible = "amlogic,meson-gpio-interrupt", "syscon"; + reg = <0xc1109880 0x10>; + interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>, + <GIC_SPI 65 IRQ_TYPE_NONE>, + <GIC_SPI 66 IRQ_TYPE_NONE>, + <GIC_SPI 67 IRQ_TYPE_NONE>, + <GIC_SPI 68 IRQ_TYPE_NONE>, + <GIC_SPI 69 IRQ_TYPE_NONE>, + <GIC_SPI 70 IRQ_TYPE_NONE>, + <GIC_SPI 71 IRQ_TYPE_NONE>; + }; + pinctrl_cbus: pinctrl at c1109880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0xc1109880 0x10>; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 828aa49c..b5a92461 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -183,6 +183,19 @@ status = "disabled"; }; + gpio_irq at c1109880 { + compatible = "amlogic,meson-gpio-interrupt", "syscon"; + reg = <0xc1109880 0x10>; + interrupts = <GIC_SPI 64 IRQ_TYPE_NONE>, + <GIC_SPI 65 IRQ_TYPE_NONE>, + <GIC_SPI 66 IRQ_TYPE_NONE>, + <GIC_SPI 67 IRQ_TYPE_NONE>, + <GIC_SPI 68 IRQ_TYPE_NONE>, + <GIC_SPI 69 IRQ_TYPE_NONE>, + <GIC_SPI 70 IRQ_TYPE_NONE>, + <GIC_SPI 71 IRQ_TYPE_NONE>; + }; + pinctrl_cbus: pinctrl at c1109880 { compatible = "amlogic,meson8b-cbus-pinctrl"; reg = <0xc1109880 0x10>; -- 2.12.2
next prev parent reply other threads:[~2017-05-07 22:54 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-05-07 16:19 [PATCH 0/5 RfC] pintrl: meson: add support for GPIO IRQs Heiner Kallweit 2017-05-07 16:19 ` Heiner Kallweit 2017-05-07 16:34 ` [PATCH 1/5] pintrl: meson: add interrupts to pinctrl data Heiner Kallweit 2017-05-07 16:34 ` Heiner Kallweit 2017-05-11 14:50 ` Linus Walleij 2017-05-11 14:50 ` Linus Walleij 2017-05-11 16:08 ` Jerome Brunet 2017-05-11 16:08 ` Jerome Brunet 2017-05-11 19:33 ` Heiner Kallweit 2017-05-11 19:33 ` Heiner Kallweit [not found] ` <7ed5a88a-43dd-f7ab-2794-48ceb5a62a93-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-05-12 6:08 ` Heiner Kallweit 2017-05-12 6:08 ` Heiner Kallweit 2017-05-12 9:51 ` Linus Walleij 2017-05-12 9:51 ` Linus Walleij 2017-05-12 17:23 ` Heiner Kallweit 2017-05-12 17:23 ` Heiner Kallweit 2017-05-07 16:34 ` [PATCH 2/5] pintrl: meson: document GPIO IRQ DT binding Heiner Kallweit 2017-05-07 16:34 ` Heiner Kallweit [not found] ` <0d835130-7c6c-751c-af15-c2ab69edcb42-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-05-12 19:38 ` Rob Herring 2017-05-12 19:38 ` Rob Herring 2017-05-12 21:41 ` Heiner Kallweit 2017-05-12 21:41 ` Heiner Kallweit [not found] ` <b39f1742-0558-beaa-1e06-eed80d644424-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-05-16 0:31 ` Rob Herring 2017-05-16 0:31 ` Rob Herring 2017-05-07 16:34 ` [PATCH 3/5] pintrl: meson: add DT node for GPIO IRQ on Meson GX Heiner Kallweit 2017-05-07 16:34 ` Heiner Kallweit 2017-05-07 16:34 ` Heiner Kallweit [this message] 2017-05-07 16:34 ` [PATCH 4/5] pintrl: meson: add DT node for GPIO IRQ on Meson 8 / 8b Heiner Kallweit [not found] ` <a4ca587b-d3e8-a22d-4d25-289871d2d095-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2017-05-07 16:34 ` [PATCH 5/5] pintrl: meson: add support for GPIO interrupts Heiner Kallweit 2017-05-07 16:34 ` Heiner Kallweit 2017-05-11 15:10 ` Linus Walleij 2017-05-11 15:10 ` Linus Walleij 2017-05-11 14:34 ` [PATCH 0/5 RfC] pintrl: meson: add support for GPIO IRQs Linus Walleij 2017-05-11 14:34 ` Linus Walleij [not found] ` <CACRpkdbeA9pwnOFjdryKjeyZewLWA7Q6ZRbxc=MreT0zJMbgQA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-05-11 20:52 ` Martin Blumenstingl 2017-05-11 20:52 ` Martin Blumenstingl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=da407841-43cc-8797-2289-2bda7474576f@gmail.com \ --to=hkallweit1@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=jbrunet@baylibre.com \ --cc=linus.walleij@linaro.org \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=marc.zyngier@arm.com \ --cc=mark.rutland@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.