All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: jic23@kernel.org
Cc: mario.tesi@st.com, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, lorenzo.bianconi@redhat.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Subject: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
Date: Wed, 16 Nov 2022 14:40:03 +0100	[thread overview]
Message-ID: <df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1668605631.git.lorenzo@kernel.org>

Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor.

Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/Kconfig           |   4 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |   2 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 128 ++++++++++++++++++-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c  |   5 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c  |   5 +
 5 files changed, 141 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 37d02e0fc227..0096035728cd 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -13,8 +13,8 @@ config IIO_ST_LSM6DSX
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
 	  lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
-	  lsm6dsv, lsm6dsv16x, the accelerometer/gyroscope of lsm9ds1
-	  and lsm6dst.
+	  lsm6dsv, lsm6dsv16x, lsm6dso16is, the accelerometer/gyroscope
+	  of lsm9ds1 and lsm6dst.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 683cfadcf62e..abf14a2ce0e9 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -35,6 +35,7 @@
 #define ST_LSM6DSTX_DEV_NAME	"lsm6dstx"
 #define ST_LSM6DSV_DEV_NAME	"lsm6dsv"
 #define ST_LSM6DSV16X_DEV_NAME	"lsm6dsv16x"
+#define ST_LSM6DSO16IS_DEV_NAME	"lsm6dso16is"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -57,6 +58,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DSTX_ID,
 	ST_LSM6DSV_ID,
 	ST_LSM6DSV16X_ID,
+	ST_LSM6DSO16IS_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b680682f9833..57a79bf35bba 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -27,7 +27,7 @@
  *   - FIFO size: 4KB
  *
  * - LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/ISM330DHCX/LSM6DST/LSM6DSOP/
- *   LSM6DSTX:
+ *   LSM6DSTX/LSM6DSO16IS:
  *   - Accelerometer/Gyroscope supported ODR [Hz]: 12.5, 26, 52, 104, 208, 416,
  *     833
  *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
@@ -1375,6 +1375,132 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 			.wakeup_src_x_mask = BIT(2),
 		},
 	},
+	{
+		.reset = {
+			.addr = 0x12,
+			.mask = BIT(0),
+		},
+		.boot = {
+			.addr = 0x12,
+			.mask = BIT(7),
+		},
+		.bdu = {
+			.addr = 0x12,
+			.mask = BIT(6),
+		},
+		.id = {
+			{
+				.hw_id = ST_LSM6DSO16IS_ID,
+				.name = ST_LSM6DSO16IS_DEV_NAME,
+				.wai = 0x22,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm6dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(7, 4),
+				},
+				.odr_avl[0] = {  12500, 0x01 },
+				.odr_avl[1] = {  26000, 0x02 },
+				.odr_avl[2] = {  52000, 0x03 },
+				.odr_avl[3] = { 104000, 0x04 },
+				.odr_avl[4] = { 208000, 0x05 },
+				.odr_avl[5] = { 416000, 0x06 },
+				.odr_avl[6] = { 833000, 0x07 },
+				.odr_len = 7,
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_G_TO_M_S_2(61000), 0x0 },
+				.fs_avl[1] = { IIO_G_TO_M_S_2(122000), 0x2 },
+				.fs_avl[2] = { IIO_G_TO_M_S_2(244000), 0x3 },
+				.fs_avl[3] = { IIO_G_TO_M_S_2(488000), 0x1 },
+				.fs_len = 4,
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x11,
+					.mask = GENMASK(3, 2),
+				},
+				.fs_avl[0] = {  IIO_DEGREE_TO_RAD(8750000), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(17500000), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(35000000), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(70000000), 0x3 },
+				.fs_len = 4,
+			},
+		},
+		.irq_config = {
+			.hla = {
+				.addr = 0x12,
+				.mask = BIT(5),
+			},
+			.od = {
+				.addr = 0x12,
+				.mask = BIT(4),
+			},
+		},
+		.shub_settings = {
+			.page_mux = {
+				.addr = 0x01,
+				.mask = BIT(6),
+			},
+			.master_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(2),
+			},
+			.pullup_en = {
+				.sec_page = true,
+				.addr = 0x14,
+				.mask = BIT(3),
+			},
+			.aux_sens = {
+				.addr = 0x14,
+				.mask = GENMASK(1, 0),
+			},
+			.wr_once = {
+				.addr = 0x14,
+				.mask = BIT(6),
+			},
+			.num_ext_dev = 3,
+			.shub_out = {
+				.sec_page = true,
+				.addr = 0x02,
+			},
+			.slv0_addr = 0x15,
+			.dw_slv0_addr = 0x21,
+		},
+	},
 };
 
 int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 0faf1b4c11af..d5929c6e4c5f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -117,6 +117,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,lsm6dsv16x",
 		.data = (void *)ST_LSM6DSV16X_ID,
 	},
+	{
+		.compatible = "st,lsm6dso16is",
+		.data = (void *)ST_LSM6DSO16IS_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -142,6 +146,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{ ST_LSM6DSV_DEV_NAME, ST_LSM6DSV_ID },
 	{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
+	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 57597aaa2a92..24d5e51a8662 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -117,6 +117,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,lsm6dsv16x",
 		.data = (void *)ST_LSM6DSV16X_ID,
 	},
+	{
+		.compatible = "st,lsm6dso16is",
+		.data = (void *)ST_LSM6DSO16IS_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -142,6 +146,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DSTX_DEV_NAME, ST_LSM6DSTX_ID },
 	{ ST_LSM6DSV_DEV_NAME, ST_LSM6DSV_ID },
 	{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
+	{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
-- 
2.38.1


  reply	other threads:[~2022-11-16 13:40 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-16 13:40 [PATCH 0/2] add support for LSM6DSO16IS Lorenzo Bianconi
2022-11-16 13:40 ` Lorenzo Bianconi [this message]
2022-11-16 13:40 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is Lorenzo Bianconi
2022-11-17 16:54   ` Rob Herring
2022-11-23 20:51 ` [PATCH 0/2] add support for LSM6DSO16IS Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org \
    --to=lorenzo@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=lorenzo.bianconi@redhat.com \
    --cc=mario.tesi@st.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.