From: Zhangjin Wu <falcon@tinylab.org>
To: w@1wt.eu
Cc: falcon@tinylab.org, arnd@arndb.de, linux-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org, thomas@t-8ch.de,
"Thomas Weißschuh" <linux@weissschuh.net>
Subject: [PATCH v3 1/7] tools/nolibc: add support for powerpc
Date: Thu, 27 Jul 2023 22:59:48 +0800 [thread overview]
Message-ID: <f000166ad501916c9361eae816665bdc4851f8bd.1690468707.git.falcon@tinylab.org> (raw)
In-Reply-To: <cover.1690468707.git.falcon@tinylab.org>
Both syscall declarations and _start code definition are added for
powerpc to nolibc.
Like mips, powerpc uses a register (exactly, the summary overflow bit)
to record the error occurred, and uses another register to return the
value [1]. So, the return value of every syscall declaration must be
normalized to match the __sysret() helper, return -value when there is
an error, otheriwse, return value directly.
Glibc and musl use different methods to check the summary overflow bit,
glibc (sysdeps/unix/sysv/linux/powerpc/sysdep.h) saves the cr register
to r0 at first, and then check the summary overflow bit in cr0:
mfcr r0
r0 & (1 << 28) ? -r3 : r3
-->
10003c14: 7c 00 00 26 mfcr r0
10003c18: 74 09 10 00 andis. r9,r0,4096
10003c1c: 41 82 00 08 beq 0x10003c24
10003c20: 7c 63 00 d0 neg r3,r3
Musl (arch/powerpc/syscall_arch.h) directly checks the summary overflow
bit with the 'bns' instruction, it is smaller:
/* no summary overflow bit means no error, return value directly */
bns+ 1f
/* otherwise, return negated value */
neg r3, r3
1:
-->
10000418: 40 a3 00 08 bns 0x10000420
1000041c: 7c 63 00 d0 neg r3,r3
Like musl, Linux (arch/powerpc/include/asm/vdso/gettimeofday.h) uses the
same method for do_syscall_2() too.
Here applies the second method to get smaller size.
[1]: https://man7.org/linux/man-pages/man2/syscall.2.html
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
---
tools/include/nolibc/arch-powerpc.h | 188 ++++++++++++++++++++++++++++
tools/include/nolibc/arch.h | 2 +
2 files changed, 190 insertions(+)
create mode 100644 tools/include/nolibc/arch-powerpc.h
diff --git a/tools/include/nolibc/arch-powerpc.h b/tools/include/nolibc/arch-powerpc.h
new file mode 100644
index 000000000000..caa943e1521a
--- /dev/null
+++ b/tools/include/nolibc/arch-powerpc.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * PowerPC specific definitions for NOLIBC
+ * Copyright (C) 2023 Zhangjin Wu <falcon@tinylab.org>
+ */
+
+#ifndef _NOLIBC_ARCH_POWERPC_H
+#define _NOLIBC_ARCH_POWERPC_H
+
+#include "compiler.h"
+#include "crt.h"
+
+/* Syscalls for PowerPC :
+ * - stack is 16-byte aligned
+ * - syscall number is passed in r0
+ * - arguments are in r3, r4, r5, r6, r7, r8, r9
+ * - the system call is performed by calling "sc"
+ * - syscall return comes in r3, and the summary overflow bit is checked
+ * to know if an error occurred, in which case errno is in r3.
+ * - the arguments are cast to long and assigned into the target
+ * registers which are then simply passed as registers to the asm code,
+ * so that we don't have to experience issues with register constraints.
+ */
+
+#define _NOLIBC_SYSCALL_CLOBBERLIST \
+ "memory", "cr0", "r12", "r11", "r10", "r9"
+
+#define my_syscall0(num) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num) \
+ : \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5", "r4" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall1(num, arg1) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5", "r4" \
+ ); \
+ _ret; \
+})
+
+
+#define my_syscall2(num, arg1, arg2) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ register long _arg2 __asm__ ("r4") = (long)(arg2); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num), "+r"(_arg2) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6", "r5" \
+ ); \
+ _ret; \
+})
+
+
+#define my_syscall3(num, arg1, arg2, arg3) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ register long _arg2 __asm__ ("r4") = (long)(arg2); \
+ register long _arg3 __asm__ ("r5") = (long)(arg3); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7", "r6" \
+ ); \
+ _ret; \
+})
+
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ register long _arg2 __asm__ ("r4") = (long)(arg2); \
+ register long _arg3 __asm__ ("r5") = (long)(arg3); \
+ register long _arg4 __asm__ ("r6") = (long)(arg4); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \
+ "+r"(_arg4) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8", "r7" \
+ ); \
+ _ret; \
+})
+
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ register long _arg2 __asm__ ("r4") = (long)(arg2); \
+ register long _arg3 __asm__ ("r5") = (long)(arg3); \
+ register long _arg4 __asm__ ("r6") = (long)(arg4); \
+ register long _arg5 __asm__ ("r7") = (long)(arg5); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \
+ "+r"(_arg4), "+r"(_arg5) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST, "r8" \
+ ); \
+ _ret; \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \
+({ \
+ register long _ret __asm__ ("r3"); \
+ register long _num __asm__ ("r0") = (num); \
+ register long _arg1 __asm__ ("r3") = (long)(arg1); \
+ register long _arg2 __asm__ ("r4") = (long)(arg2); \
+ register long _arg3 __asm__ ("r5") = (long)(arg3); \
+ register long _arg4 __asm__ ("r6") = (long)(arg4); \
+ register long _arg5 __asm__ ("r7") = (long)(arg5); \
+ register long _arg6 __asm__ ("r8") = (long)(arg6); \
+ \
+ __asm__ volatile ( \
+ " sc\n" \
+ " bns+ 1f\n" \
+ " neg %0, %0\n" \
+ "1:\n" \
+ : "=r"(_ret), "+r"(_num), "+r"(_arg2), "+r"(_arg3), \
+ "+r"(_arg4), "+r"(_arg5), "+r"(_arg6) \
+ : "0"(_arg1) \
+ : _NOLIBC_SYSCALL_CLOBBERLIST \
+ ); \
+ _ret; \
+})
+
+/* startup code */
+void __attribute__((weak, noreturn, optimize("Os", "omit-frame-pointer"))) __no_stack_protector _start(void)
+{
+ __asm__ volatile (
+ "mr 3, 1\n" /* save stack pointer to r3, as arg1 of _start_c */
+ "clrrwi 1, 1, 4\n" /* align the stack to 16 bytes */
+ "li 0, 0\n" /* zero the frame pointer */
+ "stwu 1, -16(1)\n" /* the initial stack frame */
+ "bl _start_c\n" /* transfer to c runtime */
+ );
+ __builtin_unreachable();
+}
+
+#endif /* _NOLIBC_ARCH_POWERPC_H */
diff --git a/tools/include/nolibc/arch.h b/tools/include/nolibc/arch.h
index 82b43935650f..e276fb0680af 100644
--- a/tools/include/nolibc/arch.h
+++ b/tools/include/nolibc/arch.h
@@ -25,6 +25,8 @@
#include "arch-aarch64.h"
#elif defined(__mips__) && defined(_ABIO32)
#include "arch-mips.h"
+#elif defined(__powerpc__)
+#include "arch-powerpc.h"
#elif defined(__riscv)
#include "arch-riscv.h"
#elif defined(__s390x__)
--
2.25.1
next prev parent reply other threads:[~2023-07-27 15:00 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-27 14:58 [PATCH v3 0/7] tools/nolibc: add 32/64-bit powerpc support Zhangjin Wu
2023-07-27 14:59 ` Zhangjin Wu [this message]
2023-07-27 15:00 ` [PATCH v3 2/7] tools/nolibc: add support for powerpc64 Zhangjin Wu
2023-07-27 15:02 ` [PATCH v3 3/7] selftests/nolibc: add extra configs customize support Zhangjin Wu
2023-07-29 12:36 ` Thomas Weißschuh
2023-07-29 14:39 ` Zhangjin Wu
2023-07-29 16:29 ` Willy Tarreau
2023-07-29 16:54 ` Zhangjin Wu
2023-07-29 17:10 ` Willy Tarreau
2023-07-30 4:54 ` Zhangjin Wu
2023-07-30 6:01 ` Zhangjin Wu
2023-07-30 6:18 ` Willy Tarreau
2023-07-30 11:21 ` Zhangjin Wu
2023-07-30 18:02 ` Zhangjin Wu
2023-07-27 15:03 ` [PATCH v3 4/7] selftests/nolibc: add XARCH and ARCH mapping support Zhangjin Wu
2023-07-30 6:38 ` Zhangjin Wu
2023-07-30 7:03 ` Willy Tarreau
2023-07-30 11:36 ` Zhangjin Wu
2023-07-27 15:04 ` [PATCH v3 5/7] selftests/nolibc: add test support for ppc Zhangjin Wu
2023-07-27 15:05 ` [PATCH v3 6/7] selftests/nolibc: add test support for ppc64le Zhangjin Wu
2023-07-27 15:06 ` [PATCH v3 7/7] selftests/nolibc: add test support for ppc64 Zhangjin Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f000166ad501916c9361eae816665bdc4851f8bd.1690468707.git.falcon@tinylab.org \
--to=falcon@tinylab.org \
--cc=arnd@arndb.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux@weissschuh.net \
--cc=thomas@t-8ch.de \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.