From: Leonard Crestez <leonard.crestez@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>,
Mark Brown <broonie@kernel.org>, Robin Gong <yibin.gong@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
Irina Tirdea <irina.tirdea@nxp.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Octavian Purdila <octavian.purdila@nxp.com>,
Liam Girdwood <lgirdwood@gmail.com>, <linux-pm@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
Date: Tue, 4 Apr 2017 20:04:14 +0300 [thread overview]
Message-ID: <f032759a6df750e504d040dfc80d834046c4c540.1491324640.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1491324640.git.leonard.crestez@nxp.com>
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
-&cpu0 {
- arm-supply = <&sw2_reg>;
+®_arm {
+ vin-supply = <&sw2_reg>;
};
&iomuxc {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Leonard Crestez <leonard.crestez@nxp.com>
To: Lucas Stach <l.stach@pengutronix.de>,
Viresh Kumar <viresh.kumar@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Sascha Hauer <kernel@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>,
Mark Brown <broonie@kernel.org>, Robin Gong <yibin.gong@nxp.com>,
Anson Huang <Anson.Huang@nxp.com>,
Irina Tirdea <irina.tirdea@nxp.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Octavian Purdila <octavian.purdila@nxp.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
Date: Tue, 4 Apr 2017 20:04:14 +0300 [thread overview]
Message-ID: <f032759a6df750e504d040dfc80d834046c4c540.1491324640.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1491324640.git.leonard.crestez@nxp.com>
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
-&cpu0 {
- arm-supply = <&sw2_reg>;
+®_arm {
+ vin-supply = <&sw2_reg>;
};
&iomuxc {
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: leonard.crestez@nxp.com (Leonard Crestez)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
Date: Tue, 4 Apr 2017 20:04:14 +0300 [thread overview]
Message-ID: <f032759a6df750e504d040dfc80d834046c4c540.1491324640.git.leonard.crestez@nxp.com> (raw)
In-Reply-To: <cover.1491324640.git.leonard.crestez@nxp.com>
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
-&cpu0 {
- arm-supply = <&sw2_reg>;
+®_arm {
+ vin-supply = <&sw2_reg>;
};
&iomuxc {
--
2.7.4
next prev parent reply other threads:[~2017-04-04 17:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-04 17:04 [PATCH v2 0/4] ARM: imx: Set LDO regulator supply Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` [PATCH v2 1/4] cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` [PATCH v2 2/4] cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-05 8:03 ` Lucas Stach
2017-04-05 8:03 ` Lucas Stach
2017-04-11 6:37 ` Viresh Kumar
2017-04-11 6:37 ` Viresh Kumar
2017-04-11 8:16 ` Leonard Crestez
2017-04-11 8:16 ` Leonard Crestez
2017-04-11 8:16 ` Leonard Crestez
2017-04-11 9:27 ` Viresh Kumar
2017-04-11 9:27 ` Viresh Kumar
2017-04-04 17:04 ` [PATCH v2 3/4] ARM: dts: imx6qdl-sabresd: Set LDO regulator supply Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-07 12:20 ` Shawn Guo
2017-04-07 12:20 ` Shawn Guo
2017-04-04 17:04 ` Leonard Crestez [this message]
2017-04-04 17:04 ` [PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm " Leonard Crestez
2017-04-04 17:04 ` Leonard Crestez
2017-04-07 12:21 ` Shawn Guo
2017-04-07 12:21 ` Shawn Guo
2017-04-19 9:28 ` [PATCH v2 0/4] ARM: imx: Set LDO " Leonard Crestez
2017-04-19 9:28 ` Leonard Crestez
2017-04-19 9:28 ` Leonard Crestez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f032759a6df750e504d040dfc80d834046c4c540.1491324640.git.leonard.crestez@nxp.com \
--to=leonard.crestez@nxp.com \
--cc=Anson.Huang@nxp.com \
--cc=broonie@kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=irina.tirdea@nxp.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=octavian.purdila@nxp.com \
--cc=rjw@rjwysocki.net \
--cc=shawnguo@kernel.org \
--cc=viresh.kumar@linaro.org \
--cc=yibin.gong@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.