All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Elijah Newren via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: Derrick Stolee <dstolee@microsoft.com>,
	Elijah Newren <newren@gmail.com>,
	Elijah Newren <newren@gmail.com>
Subject: [PATCH v2 16/18] unpack-trees: provide warnings on sparse updates for unmerged paths too
Date: Sat, 21 Mar 2020 18:00:07 +0000	[thread overview]
Message-ID: <f664a6dcbb3c3369aa7b94386894da1d437e3295.1584813609.git.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.726.v2.git.git.1584813609.gitgitgadget@gmail.com>

From: Elijah Newren <newren@gmail.com>

When sparse-checkout runs to update the list of sparsity patterns, it
gives warnings if it can't remove paths from the working tree because
those files have dirty changes.  Add a similar warning for unmerged
paths as well.

Signed-off-by: Elijah Newren <newren@gmail.com>
---
 t/t1091-sparse-checkout-builtin.sh | 24 ++++++++++++++++++++++++
 unpack-trees.c                     | 30 ++++++++++++++++++++++++++++++
 unpack-trees.h                     |  1 +
 3 files changed, 55 insertions(+)

diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh
index 11eb567f3fb..39093bcd5ec 100755
--- a/t/t1091-sparse-checkout-builtin.sh
+++ b/t/t1091-sparse-checkout-builtin.sh
@@ -342,6 +342,30 @@ test_expect_success 'sparse-checkout (init|set|disable) warns with dirty status'
 	git -C dirty sparse-checkout disable
 '
 
+test_expect_success 'sparse-checkout (init|set|disable) warns with unmerged status' '
+	git clone repo unmerged &&
+
+	cat >input <<-EOF &&
+	0 0000000000000000000000000000000000000000	folder1/a
+	100644 $(git -C unmerged rev-parse HEAD:folder1/a) 1	folder1/a
+	EOF
+	git -C unmerged update-index --index-info <input &&
+
+	git -C unmerged sparse-checkout init 2>err &&
+	test_i18ngrep "warning.*The following paths are unmerged" err &&
+
+	git -C unmerged sparse-checkout set /folder2/* /deep/deeper1/* &&
+	test_i18ngrep "warning.*The following paths are unmerged" err &&
+
+	git -C unmerged sparse-checkout disable &&
+	test_i18ngrep "warning.*The following paths are unmerged" err &&
+
+	git -C unmerged reset --hard &&
+	git -C unmerged sparse-checkout init &&
+	git -C unmerged sparse-checkout set /folder2/* /deep/deeper1/* &&
+	git -C unmerged sparse-checkout disable
+'
+
 test_expect_success 'cone mode: set with core.ignoreCase=true' '
 	rm repo/.git/info/sparse-checkout &&
 	git -C repo sparse-checkout init --cone &&
diff --git a/unpack-trees.c b/unpack-trees.c
index 7c24933016b..298241a5e0e 100644
--- a/unpack-trees.c
+++ b/unpack-trees.c
@@ -52,6 +52,9 @@ static const char *unpack_plumbing_errors[NB_UNPACK_TREES_WARNING_TYPES] = {
 	/* WARNING_SPARSE_NOT_UPTODATE_FILE */
 	"Path '%s' not uptodate; will not remove from working tree.",
 
+	/* WARNING_SPARSE_UNMERGED_FILE */
+	"Path '%s' unmerged; will not remove from working tree.",
+
 	/* WARNING_SPARSE_ORPHANED_NOT_OVERWRITTEN */
 	"Path '%s' already present; will not overwrite with sparse update.",
 };
@@ -173,6 +176,8 @@ void setup_unpack_trees_porcelain(struct unpack_trees_options *opts,
 
 	msgs[WARNING_SPARSE_NOT_UPTODATE_FILE] =
 		_("The following paths are not up to date and were left despite sparse patterns:\n%s");
+	msgs[WARNING_SPARSE_UNMERGED_FILE] =
+		_("The following paths are unmerged and were left despite sparse patterns:\n%s");
 	msgs[WARNING_SPARSE_ORPHANED_NOT_OVERWRITTEN] =
 		_("The following paths were already present and thus not updated despite sparse patterns:\n%s");
 
@@ -548,6 +553,23 @@ static int apply_sparse_checkout(struct index_state *istate,
 	return 0;
 }
 
+static int warn_conflicted_path(struct index_state *istate,
+				int i,
+				struct unpack_trees_options *o)
+{
+	char *conflicting_path = istate->cache[i]->name;
+	int count = 0;
+
+	add_rejected_path(o, WARNING_SPARSE_UNMERGED_FILE, conflicting_path);
+
+	/* Find out how many higher stage entries at same path */
+	while (++count < istate->cache_nr &&
+	       !strcmp(conflicting_path,
+		       istate->cache[i+count]->name))
+		/* do nothing */;
+	return count;
+}
+
 static inline int call_unpack_fn(const struct cache_entry * const *src,
 				 struct unpack_trees_options *o)
 {
@@ -1793,6 +1815,14 @@ enum update_sparsity_result update_sparsity(struct unpack_trees_options *o)
 	for (i = 0; i < o->src_index->cache_nr; i++) {
 		struct cache_entry *ce = o->src_index->cache[i];
 
+
+		if (ce_stage(ce)) {
+			/* -1 because for loop will increment by 1 */
+			i += warn_conflicted_path(o->src_index, i, o) - 1;
+			ret = UPDATE_SPARSITY_WARNINGS;
+			continue;
+		}
+
 		if (apply_sparse_checkout(o->src_index, ce, o))
 			ret = UPDATE_SPARSITY_WARNINGS;
 
diff --git a/unpack-trees.h b/unpack-trees.h
index d91c65ae453..f970fd6c2f4 100644
--- a/unpack-trees.h
+++ b/unpack-trees.h
@@ -27,6 +27,7 @@ enum unpack_trees_error_types {
 	NB_UNPACK_TREES_ERROR_TYPES,
 
 	WARNING_SPARSE_NOT_UPTODATE_FILE,
+	WARNING_SPARSE_UNMERGED_FILE,
 	WARNING_SPARSE_ORPHANED_NOT_OVERWRITTEN,
 
 	NB_UNPACK_TREES_WARNING_TYPES,
-- 
gitgitgadget


  parent reply	other threads:[~2020-03-21 18:00 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-14  7:11 [PATCH 0/7] Sparse checkout improvements -- improved sparsity updating Elijah Newren via GitGitGadget
2020-03-14  7:11 ` [PATCH 1/7] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget
2020-03-14  7:11 ` [PATCH 2/7] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget
2020-03-14  7:11 ` [PATCH 3/7] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget
2020-03-14  7:11 ` [PATCH 4/7] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget
2020-03-15 14:39   ` Derrick Stolee
2020-03-14  7:11 ` [PATCH 5/7] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget
2020-03-15 18:17   ` Derrick Stolee
2020-03-16 20:24     ` Elijah Newren
2020-03-14  7:11 ` [PATCH 6/7] sparse-checkout: use " Elijah Newren via GitGitGadget
2020-03-15 16:19   ` Derrick Stolee
2020-03-16 17:02     ` Elijah Newren
2020-03-14  7:11 ` [PATCH 7/7] sparse-checkout: provide a new update subcommand Elijah Newren via GitGitGadget
2020-03-15 16:24   ` Derrick Stolee
2020-03-16 17:05     ` Elijah Newren
2020-03-16 17:18       ` Derrick Stolee
2020-03-16 19:23         ` Elijah Newren
2020-03-15 12:26 ` [PATCH 0/7] Sparse checkout improvements -- improved sparsity updating Derrick Stolee
2020-03-21 17:59 ` [PATCH v2 00/18] " Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 01/18] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 02/18] unpack-trees: remove unused error type Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 03/18] unpack-trees: simplify verify_absent_sparse() Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 04/18] unpack-trees: simplify pattern_list freeing Elijah Newren via GitGitGadget
2020-03-23 15:57     ` Derrick Stolee
2020-03-21 17:59   ` [PATCH v2 05/18] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 06/18] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 07/18] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget
2020-03-21 17:59   ` [PATCH v2 08/18] unpack-trees: pull sparse-checkout pattern reading into a new function Elijah Newren via GitGitGadget
2020-03-21 18:00   ` [PATCH v2 09/18] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget
2020-03-23 18:02     ` Derrick Stolee
2020-03-23 18:10       ` Elijah Newren
2020-03-23 18:21         ` Derrick Stolee
2020-03-23 20:24           ` Junio C Hamano
2020-03-21 18:00   ` [PATCH v2 10/18] sparse-checkout: use " Elijah Newren via GitGitGadget
2020-03-23 18:07     ` Derrick Stolee
2020-03-23 18:14       ` Elijah Newren
2020-03-23 18:22         ` Derrick Stolee
2020-03-21 18:00   ` [PATCH v2 11/18] sparse-checkout: use improved unpack_trees porcelain messages Elijah Newren via GitGitGadget
2020-03-21 18:00   ` [PATCH v2 12/18] unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier Elijah Newren via GitGitGadget
2020-03-21 18:00   ` [PATCH v2 13/18] unpack-trees: rename ERROR_* fields meant for warnings to WARNING_* Elijah Newren via GitGitGadget
2020-03-21 18:00   ` [PATCH v2 14/18] unpack-trees: split display_error_msgs() into two Elijah Newren via GitGitGadget
2020-03-23 18:32     ` Derrick Stolee
2020-03-21 18:00   ` [PATCH v2 15/18] unpack-trees: make sparse path messages sound like warnings Elijah Newren via GitGitGadget
2020-03-21 18:00   ` Elijah Newren via GitGitGadget [this message]
2020-03-21 18:00   ` [PATCH v2 17/18] unpack-trees: failure to set SKIP_WORKTREE bits always just a warning Elijah Newren via GitGitGadget
2020-03-21 18:00   ` [PATCH v2 18/18] sparse-checkout: provide a new reapply subcommand Elijah Newren via GitGitGadget
2020-03-23 18:40     ` Derrick Stolee
2020-03-23 18:41   ` [PATCH v2 00/18] Sparse checkout improvements -- improved sparsity updating Derrick Stolee
2020-03-23 20:26     ` Junio C Hamano
2020-03-27  0:48   ` [PATCH v3 " Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 01/18] unpack-trees: fix minor typo in comment Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 02/18] unpack-trees: remove unused error type Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 03/18] unpack-trees: simplify verify_absent_sparse() Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 04/18] unpack-trees: simplify pattern_list freeing Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 05/18] t1091: make some tests a little more defensive against failures Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 06/18] unpack-trees: allow check_updates() to work on a different index Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 07/18] unpack-trees: do not mark a dirty path with SKIP_WORKTREE Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 08/18] unpack-trees: pull sparse-checkout pattern reading into a new function Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 09/18] unpack-trees: add a new update_sparsity() function Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 10/18] sparse-checkout: use " Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 11/18] sparse-checkout: use improved unpack_trees porcelain messages Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 12/18] unpack-trees: move ERROR_WOULD_LOSE_SUBMODULE earlier Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 13/18] unpack-trees: rename ERROR_* fields meant for warnings to WARNING_* Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 14/18] unpack-trees: split display_error_msgs() into two Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 15/18] unpack-trees: make sparse path messages sound like warnings Elijah Newren via GitGitGadget
2020-03-27  0:48     ` [PATCH v3 16/18] unpack-trees: provide warnings on sparse updates for unmerged paths too Elijah Newren via GitGitGadget
2020-03-27  0:49     ` [PATCH v3 17/18] unpack-trees: failure to set SKIP_WORKTREE bits always just a warning Elijah Newren via GitGitGadget
2020-03-27  0:49     ` [PATCH v3 18/18] sparse-checkout: provide a new reapply subcommand Elijah Newren via GitGitGadget
2020-03-27 13:22     ` [PATCH v3 00/18] Sparse checkout improvements -- improved sparsity updating Derrick Stolee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f664a6dcbb3c3369aa7b94386894da1d437e3295.1584813609.git.gitgitgadget@gmail.com \
    --to=gitgitgadget@gmail.com \
    --cc=dstolee@microsoft.com \
    --cc=git@vger.kernel.org \
    --cc=newren@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.