From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Chris Brandt <chris.brandt@renesas.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: dts: rza2mevb: Fix LED node names Date: Wed, 15 Jun 2022 16:01:10 +0200 [thread overview] Message-ID: <f6e2883c16803b5d90a26c38d8e61ad15096089c.1655301593.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm/boot/dts/r7s9210-rza2mevb.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml Fix this by prefixing the LED node names with "led-". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.20. arch/arm/boot/dts/r7s9210-rza2mevb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 9c0d9686fe01133b..69a5a44b8a2fdd74 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -71,10 +71,10 @@ lbsc { leds { compatible = "gpio-leds"; - red { + led-red { gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; }; - green { + led-green { gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Chris Brandt <chris.brandt@renesas.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH] ARM: dts: rza2mevb: Fix LED node names Date: Wed, 15 Jun 2022 16:01:10 +0200 [thread overview] Message-ID: <f6e2883c16803b5d90a26c38d8e61ad15096089c.1655301593.git.geert+renesas@glider.be> (raw) "make dtbs_check": arch/arm/boot/dts/r7s9210-rza2mevb.dtb: leds: 'green', 'red' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-gpio.yaml Fix this by prefixing the LED node names with "led-". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- To be queued in renesas-devel for v5.20. arch/arm/boot/dts/r7s9210-rza2mevb.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index 9c0d9686fe01133b..69a5a44b8a2fdd74 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -71,10 +71,10 @@ lbsc { leds { compatible = "gpio-leds"; - red { + led-red { gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>; }; - green { + led-green { gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-15 14:01 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-15 14:01 Geert Uytterhoeven [this message] 2022-06-15 14:01 ` [PATCH] ARM: dts: rza2mevb: Fix LED node names Geert Uytterhoeven 2022-06-15 22:16 ` Kieran Bingham 2022-06-15 22:16 ` Kieran Bingham
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=f6e2883c16803b5d90a26c38d8e61ad15096089c.1655301593.git.geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=chris.brandt@renesas.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.