From: Landen Chao <landen.chao@mediatek.com> To: <andrew@lunn.ch>, <f.fainelli@gmail.com>, <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com> Cc: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>, <sean.wang@mediatek.com>, <opensource@vdorst.com>, <frank-w@public-files.de>, <dqfext@gmail.com>, Landen Chao <landen.chao@mediatek.com> Subject: [PATCH net-next v2 6/7] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board Date: Tue, 18 Aug 2020 15:14:11 +0800 [thread overview] Message-ID: <fb458715fc82b2222674d857d16841da57920990.1597729692.git.landen.chao@mediatek.com> (raw) In-Reply-To: <cover.1597729692.git.landen.chao@mediatek.com> Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support. mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be configured as sgmii interface. In this patch, change to connet mt7622 gmac0 and mt7531 port6 through sgmii interface. Signed-off-by: Landen Chao <landen.chao@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 57 +++++++++++++++++--- 1 file changed, 51 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 0b4de627f96e..3fd948fb7f7a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -105,20 +105,65 @@ pinctrl-0 = <ð_pins>; status = "okay"; - gmac1: mac@1 { + gmac0: mac@0 { compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy5>; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; }; mdio-bus { #address-cells = <1>; #size-cells = <0>; - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + reset-gpios = <&pio 54 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + }; + }; }; + }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Landen Chao <landen.chao@mediatek.com> To: <andrew@lunn.ch>, <f.fainelli@gmail.com>, <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, dqfext@gmail.com, frank-w@public-files.de, netdev@vger.kernel.org, sean.wang@mediatek.com, linux-kernel@vger.kernel.org, opensource@vdorst.com, linux-mediatek@lists.infradead.org, Landen Chao <landen.chao@mediatek.com>, davem@davemloft.net Subject: [PATCH net-next v2 6/7] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board Date: Tue, 18 Aug 2020 15:14:11 +0800 [thread overview] Message-ID: <fb458715fc82b2222674d857d16841da57920990.1597729692.git.landen.chao@mediatek.com> (raw) In-Reply-To: <cover.1597729692.git.landen.chao@mediatek.com> Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support. mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be configured as sgmii interface. In this patch, change to connet mt7622 gmac0 and mt7531 port6 through sgmii interface. Signed-off-by: Landen Chao <landen.chao@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 57 +++++++++++++++++--- 1 file changed, 51 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts index 0b4de627f96e..3fd948fb7f7a 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts @@ -105,20 +105,65 @@ pinctrl-0 = <ð_pins>; status = "okay"; - gmac1: mac@1 { + gmac0: mac@0 { compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy5>; + reg = <0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; }; mdio-bus { #address-cells = <1>; #size-cells = <0>; - phy5: ethernet-phy@5 { - reg = <5>; - phy-mode = "sgmii"; + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + reset-gpios = <&pio 54 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan3"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + }; + }; }; + }; }; -- 2.17.1 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek
next prev parent reply other threads:[~2020-08-18 7:15 UTC|newest] Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-18 7:14 [PATCH net-next v2 0/7] net-next: dsa: mt7530: add support for MT7531 Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 7:14 ` [PATCH net-next v2 1/7] net: dsa: mt7530: Refine message in Kconfig Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 7:14 ` [PATCH net-next v2 2/7] net: dsa: mt7530: support full-duplex gigabit only Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 15:49 ` Andrew Lunn 2020-08-18 15:49 ` Andrew Lunn 2020-08-18 7:14 ` [PATCH net-next v2 3/7] net: dsa: mt7530: Extend device data ready for adding a new hardware Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 15:56 ` Andrew Lunn 2020-08-18 15:56 ` Andrew Lunn 2020-08-18 17:31 ` Frank Wunderlich 2020-08-18 17:31 ` Frank Wunderlich 2020-08-18 7:14 ` [PATCH net-next v2 4/7] dt-bindings: net: dsa: add new MT7531 binding to support MT7531 Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-25 19:43 ` Rob Herring 2020-08-25 19:43 ` Rob Herring 2020-08-18 7:14 ` [PATCH net-next v2 5/7] net: dsa: mt7530: Add the support of MT7531 switch Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 15:23 ` Jakub Kicinski 2020-08-18 15:23 ` Jakub Kicinski 2020-08-19 9:50 ` Landen Chao 2020-08-19 9:50 ` Landen Chao 2020-08-18 16:09 ` Andrew Lunn 2020-08-18 16:09 ` Andrew Lunn 2020-08-19 9:44 ` Landen Chao 2020-08-19 9:44 ` Landen Chao 2020-08-19 13:12 ` Andrew Lunn 2020-08-19 13:12 ` Andrew Lunn 2020-08-19 23:46 ` René van Dorst 2020-08-19 23:46 ` René van Dorst 2020-08-20 15:29 ` Chuanhong Guo 2020-08-20 15:29 ` Chuanhong Guo 2020-08-18 7:14 ` Landen Chao [this message] 2020-08-18 7:14 ` [PATCH net-next v2 6/7] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board Landen Chao 2020-08-18 16:10 ` Andrew Lunn 2020-08-18 16:10 ` Andrew Lunn 2020-08-18 7:14 ` [PATCH net-next v2 7/7] arm64: dts: mt7622: add mt7531 dsa to bananapi-bpi-r64 board Landen Chao 2020-08-18 7:14 ` Landen Chao 2020-08-18 16:24 ` Vladimir Oltean 2020-08-18 16:24 ` Vladimir Oltean 2020-08-19 8:15 ` Landen Chao 2020-08-19 8:15 ` Landen Chao 2020-08-19 8:51 ` Vladimir Oltean 2020-08-19 8:51 ` Vladimir Oltean 2020-08-18 17:54 ` Aw: [PATCH net-next v2 0/7] net-next: dsa: mt7530: add support for MT7531 Frank Wunderlich 2020-08-18 17:54 ` Frank Wunderlich 2020-08-19 3:49 ` DENG Qingfang 2020-08-19 3:49 ` DENG Qingfang 2020-08-19 6:57 ` Frank Wunderlich 2020-08-19 7:38 ` Landen Chao 2020-08-19 7:38 ` Landen Chao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=fb458715fc82b2222674d857d16841da57920990.1597729692.git.landen.chao@mediatek.com \ --to=landen.chao@mediatek.com \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=dqfext@gmail.com \ --cc=f.fainelli@gmail.com \ --cc=frank-w@public-files.de \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mediatek@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=matthias.bgg@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=opensource@vdorst.com \ --cc=robh+dt@kernel.org \ --cc=sean.wang@mediatek.com \ --cc=vivien.didelot@savoirfairelinux.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.