RadioTap Archive on
 help / color / Atom feed
* [RFA v2] HE support
@ 2018-06-18 13:56 Johannes Berg
  0 siblings, 0 replies; only message in thread
From: Johannes Berg @ 2018-06-18 13:56 UTC (permalink / raw)
  To: radiotap-S783fYmB3Ccdnm+yROfE0A

Starting a new thread for this...

I think between reviews and using it in the first three 11ax plugfests
we've nailed down the bits enough to really standardise them now. I know
of one thing that's missing, which is the MIMO configuration in trigger-
based PPDUs - this isn't part of the HE-SIG-A because it's in the
trigger frame, and might never be. As we don't have any spare (2+6 for
known+data) bits in the HE radiotap data and only trigger-based PPDUs
would carry this, I'd propose a new field if these end up being needed.

Rather than copy/pasting everything, here are the definitions:

Most of the HE support was already implemented in wireshark by Richard
(partially at least working for the WFA), thanks!

So as far as patches are concerned, we have that already in wireshark,
and producers are in our tree:

We'll be upstreaming those in due course.

It's only been half a year since the first posting, so I guess we can do
another 3-week commenting period ;-)


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-18 13:56 [RFA v2] HE support Johannes Berg

RadioTap Archive on

Archives are clonable:
	git clone --mirror radiotap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 radiotap radiotap/ \
	public-inbox-index radiotap

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone