RadioTap Archive on lore.kernel.org
 help / color / Atom feed
* MCS field - STBC and Ness
@ 2012-05-11  0:31 Simon Barber
       [not found] ` <4FAC5DE0.90708-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
  0 siblings, 1 reply; 12+ messages in thread
From: Simon Barber @ 2012-05-11  0:31 UTC (permalink / raw)
  To: radiotap-sUITvd46vNxg9hUCZPvPmw, wojciech.dubowik-ASv44eHyqLVBDgjK7y7TUQ

Hi all,

I am writing a Wireshark extension to visualise 802.11 frames on a 
timeline. In order to do this I need to be able to calculate the 
duration from start of TX to end of TX for each frame.

For 802.11n I need to know the number of HT-DLTF and HT-ELTF training 
symbols that are sent in the header - I have everything else needed to 
calculate the duration. Given the MCS and the STBC and the Ness (Number 
of extension spatial streams) I can calculate the number of training 
symbols.

Both STBC and Ness are encoded in the HT-SIG transmitted at the start of 
each HT frame.

The current proposal (or has it not yet been accepted?) for STBC 
allocates just 1 bit - but the STBC field can have values or 0, 1 or 2.

Ness can be 0-3, so the remaining 2 bits could be allocated to Ness, but 
this does not solve the problem of how to encode the modes with 2 
spatial streams and 2 additional streams for STBC.

Does anyone know what current hardware supports - STBC values or 0,1,2? 
Ness values of 0-3?

Any suggestions for how to convey these

Simon

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, back to index

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-11  0:31 MCS field - STBC and Ness Simon Barber
     [not found] ` <4FAC5DE0.90708-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-05-11  7:04   ` Wojciech Dubowik
     [not found]     ` <4FACBA13.9040509-ASv44eHyqLVBDgjK7y7TUQ@public.gmane.org>
2012-05-11 16:44       ` Simon Barber
     [not found]         ` <4FAD41E4.3090803-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-05-11 16:53           ` Simon Barber
     [not found]             ` <4FAD43F0.20807-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-05-11 18:35               ` Johannes Berg
     [not found]                 ` <1336761346.8739.3.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org>
2012-05-12  4:27                   ` Simon Barber
     [not found]                     ` <4FADE69F.9040100-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-07-05  9:12                       ` Johannes Berg
     [not found]                         ` <1341479550.4455.36.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org>
2012-11-01  0:22                           ` Simon Barber
     [not found]                             ` <5091C0BC.4040305-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-11-02  0:24                               ` Simon Barber
     [not found]                                 ` <509312DB.7070100-vp0mx6+5gkqFX2APIN6yfw@public.gmane.org>
2012-11-05 14:35                                   ` Johannes Berg
2012-11-17  6:32                                   ` Standardisation - adding 2 bit STBC and Ness to MCS Simon Barber
2012-07-04 17:06   ` MCS field - STBC and Ness David Young

RadioTap Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/radiotap/0 radiotap/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 radiotap radiotap/ https://lore.kernel.org/radiotap \
		radiotap@radiotap.org
	public-inbox-index radiotap

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.netbsd.radiotap


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git