From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Sharpe Subject: Re: DMG Support Date: Thu, 27 Jun 2019 11:14:45 -0700 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: Sender: radiotap-owner-sUITvd46vNxg9hUCZPvPmw@public.gmane.org List-Unsubscribe: To: Krishna Chaitanya Cc: radiotap-S783fYmB3Ccdnm+yROfE0A@public.gmane.org List-Id: radiotap@radiotap.org On Thu, Jun 27, 2019 at 10:16 AM Krishna Chaitanya wrote: > > Hi Guys, > > I am looking at support for DMG specific fields to radiotap, the only > discussion I have found didn't reach any conclusion [1]. > > Is there a plan to support these fields? It definitely needs a DMG > Type field with at least below params (from top of my head) > > - MCS (and extended MCS) along with data rate mapping > - C-PHY > - SC-PHY > - Low power SC-PHY > -OFDM > - Beam/Sector/Antenna ID Information > - RCPI Is there any kernel capture code or any other device that would support thi= s? The general procedure to get there, however, is: 1. Propose the new header. 2. Implement code in Wireshark to handle the header and include useful info in the pseudo-header 3. Implement code that can generate sample captures with the new header. 4. Get someone to add such DMG support to DMG-capable devices to generate the new header. --=20 Regards, Richard Sharpe (=E4=BD=95=E4=BB=A5=E8=A7=A3=E6=86=82=EF=BC=9F=E5=94=AF=E6=9C=89=E6=9D=9C= =E5=BA=B7=E3=80=82--=E6=9B=B9=E6=93=8D)(=E4=BC=A0=E8=AF=B4=E6=9D=9C=E5=BA= =B7=E6=98=AF=E9=85=92=E7=9A=84=E5=8F=91=E6=98=8E=E8=80=85)