[RFC v1 1/2] rcu/tree: Clean up dynticks counter usage

[RFC v1 1/2] rcu/tree: Clean up dynticks counter usage

[Joel Fernandes (Google)]

The dynticks counter are confusing due to crowbar writes of
DYNTICK_IRQ_NONIDLE whose purpose is to detect half-interrupts (i.e. we
see rcu_irq_enter() but not rcu_irq_exit() due to a usermode upcall) and
if so then do a reset of the dyntick_nmi_nesting counters. This patch
tries to get rid of DYNTICK_IRQ_NONIDLE while still keeping the code
working, fully functional, and less confusing. The confusion recently
has even led to patches forgetting that DYNTICK_IRQ_NONIDLE was written
to which wasted lots of time.

The patch has the following changes:

(1) Use dynticks_nesting instead of dynticks_nmi_nesting for determining
outer most "EQS exit". This is needed to detect in
rcu_nmi_enter_common() if we have already EQS-exited, such as because of
a syscall. Currently we rely on a forced write of DYNTICK_IRQ_NONIDLE
from rcu_eqs_exit() for this purpose. This is one purpose of the
DYNTICK_IRQ_NONIDLE write (other than detecting half-interrupts).
However, we do not need to do that. dyntick_nesting already tells us that
we have EQS-exited so just use that thus removing the dependence of
dynticks_nmi_nesting for this purpose.

(2) Keep dynticks_nmi_nesting around because:

  (a) rcu_is_cpu_rrupt_from_idle() needs to be able to detect first
      interrupt nesting level.

  (b) We need to detect half-interrupts till we are sure they're not an
      issue. However, change the comparison to DYNTICK_IRQ_NONIDLE with 0.

(3) Since we got rid of DYNTICK_IRQ_NONIDLE, we also do cheaper
comparisons with zero instead for the code that keeps the tick on in
rcu_nmi_enter_common().

In the next patch, both of the concerns of (2) will be addressed and
then we can get rid of dynticks_nmi_nesting, however one step at a time.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
---
 kernel/rcu/rcu.h  |  4 ----
 kernel/rcu/tree.c | 60 ++++++++++++++++++++++++++++-------------------
 2 files changed, 36 insertions(+), 28 deletions(-)

diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
index aeec70fda82c..046833f3784b 100644
--- a/kernel/rcu/rcu.h
+++ b/kernel/rcu/rcu.h
@@ -12,10 +12,6 @@
 
 #include <trace/events/rcu.h>
 
-/* Offset to allow distinguishing irq vs. task-based idle entry/exit. */
-#define DYNTICK_IRQ_NONIDLE	((LONG_MAX / 2) + 1)
-
-
 /*
  * Grace-period counter management.
  */
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 68ebf0eb64c8..255cd6835526 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -81,7 +81,7 @@
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_data, rcu_data) = {
 	.dynticks_nesting = 1,
-	.dynticks_nmi_nesting = DYNTICK_IRQ_NONIDLE,
+	.dynticks_nmi_nesting = 0,
 	.dynticks = ATOMIC_INIT(RCU_DYNTICK_CTRL_CTR),
 };
 struct rcu_state rcu_state = {
@@ -558,17 +558,18 @@ EXPORT_SYMBOL_GPL(rcutorture_get_gp_data);
 /*
  * Enter an RCU extended quiescent state, which can be either the
  * idle loop or adaptive-tickless usermode execution.
- *
- * We crowbar the ->dynticks_nmi_nesting field to zero to allow for
- * the possibility of usermode upcalls having messed up our count
- * of interrupt nesting level during the prior busy period.
  */
 static void rcu_eqs_enter(bool user)
 {
 	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
 
-	WARN_ON_ONCE(rdp->dynticks_nmi_nesting != DYNTICK_IRQ_NONIDLE);
-	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
+	/* Entering usermode/idle from interrupt is not handled. These would
+	 * mean usermode upcalls or idle entry happened from interrupts. But,
+	 * reset the counter if we warn.
+	 */
+	if (WARN_ON_ONCE(rdp->dynticks_nmi_nesting != 0))
+		WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
+
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
 		     rdp->dynticks_nesting == 0);
 	if (rdp->dynticks_nesting != 1) {
@@ -642,23 +643,27 @@ static __always_inline void rcu_nmi_exit_common(bool irq)
 	 * (We are exiting an NMI handler, so RCU better be paying attention
 	 * to us!)
 	 */
+	WARN_ON_ONCE(rdp->dynticks_nesting <= 0);
 	WARN_ON_ONCE(rdp->dynticks_nmi_nesting <= 0);
 	WARN_ON_ONCE(rcu_dynticks_curr_cpu_in_eqs());
 
+	WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
+		   rdp->dynticks_nmi_nesting - 1);
 	/*
 	 * If the nesting level is not 1, the CPU wasn't RCU-idle, so
 	 * leave it in non-RCU-idle state.
 	 */
-	if (rdp->dynticks_nmi_nesting != 1) {
-		trace_rcu_dyntick(TPS("--="), rdp->dynticks_nmi_nesting, rdp->dynticks_nmi_nesting - 2, rdp->dynticks);
-		WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
-			   rdp->dynticks_nmi_nesting - 2);
+	if (rdp->dynticks_nesting != 1) {
+		trace_rcu_dyntick(TPS("--="), rdp->dynticks_nesting,
+				  rdp->dynticks_nesting - 2, rdp->dynticks);
+		WRITE_ONCE(rdp->dynticks_nesting, /* No store tearing. */
+			   rdp->dynticks_nesting - 2);
 		return;
 	}
 
 	/* This NMI interrupted an RCU-idle CPU, restore RCU-idleness. */
-	trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nmi_nesting, 0, rdp->dynticks);
-	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0); /* Avoid store tearing. */
+	trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nesting, 0, rdp->dynticks);
+	WRITE_ONCE(rdp->dynticks_nesting, 0); /* Avoid store tearing. */
 
 	if (irq)
 		rcu_prepare_for_idle();
@@ -723,10 +728,6 @@ void rcu_irq_exit_irqson(void)
 /*
  * Exit an RCU extended quiescent state, which can be either the
  * idle loop or adaptive-tickless usermode execution.
- *
- * We crowbar the ->dynticks_nmi_nesting field to DYNTICK_IRQ_NONIDLE to
- * allow for the possibility of usermode upcalls messing up our count of
- * interrupt nesting level during the busy period that is just now starting.
  */
 static void rcu_eqs_exit(bool user)
 {
@@ -747,8 +748,13 @@ static void rcu_eqs_exit(bool user)
 	trace_rcu_dyntick(TPS("End"), rdp->dynticks_nesting, 1, rdp->dynticks);
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
 	WRITE_ONCE(rdp->dynticks_nesting, 1);
-	WARN_ON_ONCE(rdp->dynticks_nmi_nesting);
-	WRITE_ONCE(rdp->dynticks_nmi_nesting, DYNTICK_IRQ_NONIDLE);
+
+	/* Exiting usermode/idle from interrupt is not handled. These would
+	 * mean usermode upcalls or idle exit happened from interrupts. But,
+	 * reset the counter if we warn.
+	 */
+	if (WARN_ON_ONCE(rdp->dynticks_nmi_nesting != 0))
+		WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
 }
 
 /**
@@ -804,6 +810,7 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
 	long incby = 2;
 
 	/* Complain about underflow. */
+	WARN_ON_ONCE(rdp->dynticks_nesting < 0);
 	WARN_ON_ONCE(rdp->dynticks_nmi_nesting < 0);
 
 	/*
@@ -826,16 +833,21 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
 
 		incby = 1;
 	} else if (tick_nohz_full_cpu(rdp->cpu) &&
-		   rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
-		   rdp->rcu_urgent_qs && !rdp->rcu_forced_tick) {
+		   !rdp->dynticks_nmi_nesting && rdp->rcu_urgent_qs &&
+		   !rdp->rcu_forced_tick) {
 		rdp->rcu_forced_tick = true;
 		tick_dep_set_cpu(rdp->cpu, TICK_DEP_BIT_RCU);
 	}
+
 	trace_rcu_dyntick(incby == 1 ? TPS("Endirq") : TPS("++="),
-			  rdp->dynticks_nmi_nesting,
-			  rdp->dynticks_nmi_nesting + incby, rdp->dynticks);
+			  rdp->dynticks_nesting,
+			  rdp->dynticks_nesting + incby, rdp->dynticks);
+
+	WRITE_ONCE(rdp->dynticks_nesting, /* Prevent store tearing. */
+		   rdp->dynticks_nesting + incby);
+
 	WRITE_ONCE(rdp->dynticks_nmi_nesting, /* Prevent store tearing. */
-		   rdp->dynticks_nmi_nesting + incby);
+		   rdp->dynticks_nmi_nesting + 1);
 	barrier();
 }
 
-- 
2.23.0.187.g17f5b7556c-goog

Re: [RFC v1 1/2] rcu/tree: Clean up dynticks counter usage

[Paul E. McKenney]

On Mon, Aug 26, 2019 at 09:33:53PM -0400, Joel Fernandes (Google) wrote:
> The dynticks counter are confusing due to crowbar writes of
> DYNTICK_IRQ_NONIDLE whose purpose is to detect half-interrupts (i.e. we
> see rcu_irq_enter() but not rcu_irq_exit() due to a usermode upcall) and
> if so then do a reset of the dyntick_nmi_nesting counters. This patch
> tries to get rid of DYNTICK_IRQ_NONIDLE while still keeping the code
> working, fully functional, and less confusing. The confusion recently
> has even led to patches forgetting that DYNTICK_IRQ_NONIDLE was written
> to which wasted lots of time.
> 
> The patch has the following changes:
> 
> (1) Use dynticks_nesting instead of dynticks_nmi_nesting for determining
> outer most "EQS exit". This is needed to detect in
> rcu_nmi_enter_common() if we have already EQS-exited, such as because of
> a syscall. Currently we rely on a forced write of DYNTICK_IRQ_NONIDLE
> from rcu_eqs_exit() for this purpose. This is one purpose of the
> DYNTICK_IRQ_NONIDLE write (other than detecting half-interrupts).
> However, we do not need to do that. dyntick_nesting already tells us that
> we have EQS-exited so just use that thus removing the dependence of
> dynticks_nmi_nesting for this purpose.
> 
> (2) Keep dynticks_nmi_nesting around because:
> 
>   (a) rcu_is_cpu_rrupt_from_idle() needs to be able to detect first
>       interrupt nesting level.
> 
>   (b) We need to detect half-interrupts till we are sure they're not an
>       issue. However, change the comparison to DYNTICK_IRQ_NONIDLE with 0.
> 
> (3) Since we got rid of DYNTICK_IRQ_NONIDLE, we also do cheaper
> comparisons with zero instead for the code that keeps the tick on in
> rcu_nmi_enter_common().
> 
> In the next patch, both of the concerns of (2) will be addressed and
> then we can get rid of dynticks_nmi_nesting, however one step at a time.

Postponing discussion of the commit log for the moment.

> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> ---
>  kernel/rcu/rcu.h  |  4 ----
>  kernel/rcu/tree.c | 60 ++++++++++++++++++++++++++++-------------------
>  2 files changed, 36 insertions(+), 28 deletions(-)
> 
> diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
> index aeec70fda82c..046833f3784b 100644
> --- a/kernel/rcu/rcu.h
> +++ b/kernel/rcu/rcu.h
> @@ -12,10 +12,6 @@
>  
>  #include <trace/events/rcu.h>
>  
> -/* Offset to allow distinguishing irq vs. task-based idle entry/exit. */
> -#define DYNTICK_IRQ_NONIDLE	((LONG_MAX / 2) + 1)
> -
> -

OK.

>  /*
>   * Grace-period counter management.
>   */
> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> index 68ebf0eb64c8..255cd6835526 100644
> --- a/kernel/rcu/tree.c
> +++ b/kernel/rcu/tree.c
> @@ -81,7 +81,7 @@
>  
>  static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_data, rcu_data) = {
>  	.dynticks_nesting = 1,
> -	.dynticks_nmi_nesting = DYNTICK_IRQ_NONIDLE,
> +	.dynticks_nmi_nesting = 0,

C initializes to zero by default, so this can simply be deleted.

>  	.dynticks = ATOMIC_INIT(RCU_DYNTICK_CTRL_CTR),
>  };
>  struct rcu_state rcu_state = {
> @@ -558,17 +558,18 @@ EXPORT_SYMBOL_GPL(rcutorture_get_gp_data);
>  /*
>   * Enter an RCU extended quiescent state, which can be either the
>   * idle loop or adaptive-tickless usermode execution.
> - *
> - * We crowbar the ->dynticks_nmi_nesting field to zero to allow for
> - * the possibility of usermode upcalls having messed up our count
> - * of interrupt nesting level during the prior busy period.
>   */
>  static void rcu_eqs_enter(bool user)
>  {
>  	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
>  
> -	WARN_ON_ONCE(rdp->dynticks_nmi_nesting != DYNTICK_IRQ_NONIDLE);
> -	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
> +	/* Entering usermode/idle from interrupt is not handled. These would
> +	 * mean usermode upcalls or idle entry happened from interrupts. But,
> +	 * reset the counter if we warn.
> +	 */

Please either put the "/*" on its own line or use "//"-style comments.

> +	if (WARN_ON_ONCE(rdp->dynticks_nmi_nesting != 0))
> +		WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
> +

@@@

>  	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) &&
>  		     rdp->dynticks_nesting == 0);
>  	if (rdp->dynticks_nesting != 1) {
> @@ -642,23 +643,27 @@ static __always_inline void rcu_nmi_exit_common(bool irq)
>  	 * (We are exiting an NMI handler, so RCU better be paying attention
>  	 * to us!)
>  	 */
> +	WARN_ON_ONCE(rdp->dynticks_nesting <= 0);

This is fine.

>  	WARN_ON_ONCE(rdp->dynticks_nmi_nesting <= 0);
>  	WARN_ON_ONCE(rcu_dynticks_curr_cpu_in_eqs());
>  
> +	WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
> +		   rdp->dynticks_nmi_nesting - 1);

This is problematic.  The +/-1 and +/-2 dance is specifically for NMIs, so...

>  	/*
>  	 * If the nesting level is not 1, the CPU wasn't RCU-idle, so
>  	 * leave it in non-RCU-idle state.
>  	 */
> -	if (rdp->dynticks_nmi_nesting != 1) {
> -		trace_rcu_dyntick(TPS("--="), rdp->dynticks_nmi_nesting, rdp->dynticks_nmi_nesting - 2, rdp->dynticks);
> -		WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
> -			   rdp->dynticks_nmi_nesting - 2);
> +	if (rdp->dynticks_nesting != 1) {
> +		trace_rcu_dyntick(TPS("--="), rdp->dynticks_nesting,
> +				  rdp->dynticks_nesting - 2, rdp->dynticks);
> +		WRITE_ONCE(rdp->dynticks_nesting, /* No store tearing. */
> +			   rdp->dynticks_nesting - 2);

Making the dancer's name be ->dynticks_nesting instead of
->dynticks_nmi_nesting is going to be trouble.  (Yes, I did
take a quick look at the next patch, more on that when I get
there.)

>  		return;
>  	}
>  
>  	/* This NMI interrupted an RCU-idle CPU, restore RCU-idleness. */
> -	trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nmi_nesting, 0, rdp->dynticks);
> -	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0); /* Avoid store tearing. */
> +	trace_rcu_dyntick(TPS("Startirq"), rdp->dynticks_nesting, 0, rdp->dynticks);
> +	WRITE_ONCE(rdp->dynticks_nesting, 0); /* Avoid store tearing. */

Same here...

>  	if (irq)
>  		rcu_prepare_for_idle();
> @@ -723,10 +728,6 @@ void rcu_irq_exit_irqson(void)
>  /*
>   * Exit an RCU extended quiescent state, which can be either the
>   * idle loop or adaptive-tickless usermode execution.
> - *
> - * We crowbar the ->dynticks_nmi_nesting field to DYNTICK_IRQ_NONIDLE to
> - * allow for the possibility of usermode upcalls messing up our count of
> - * interrupt nesting level during the busy period that is just now starting.
>   */
>  static void rcu_eqs_exit(bool user)
>  {
> @@ -747,8 +748,13 @@ static void rcu_eqs_exit(bool user)
>  	trace_rcu_dyntick(TPS("End"), rdp->dynticks_nesting, 1, rdp->dynticks);
>  	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
>  	WRITE_ONCE(rdp->dynticks_nesting, 1);
> -	WARN_ON_ONCE(rdp->dynticks_nmi_nesting);
> -	WRITE_ONCE(rdp->dynticks_nmi_nesting, DYNTICK_IRQ_NONIDLE);
> +
> +	/* Exiting usermode/idle from interrupt is not handled. These would
> +	 * mean usermode upcalls or idle exit happened from interrupts. But,
> +	 * reset the counter if we warn.
> +	 */
> +	if (WARN_ON_ONCE(rdp->dynticks_nmi_nesting != 0))
> +		WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);

And here.  Plus this is adding a test and branch in the common case.
Given that the location being written to should be hot in the cache,
it is not clear that this is a win.

>  }
>  
>  /**
> @@ -804,6 +810,7 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
>  	long incby = 2;
>  
>  	/* Complain about underflow. */
> +	WARN_ON_ONCE(rdp->dynticks_nesting < 0);

OK.

>  	WARN_ON_ONCE(rdp->dynticks_nmi_nesting < 0);
>  
>  	/*
> @@ -826,16 +833,21 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
>  
>  		incby = 1;
>  	} else if (tick_nohz_full_cpu(rdp->cpu) &&
> -		   rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
> -		   rdp->rcu_urgent_qs && !rdp->rcu_forced_tick) {
> +		   !rdp->dynticks_nmi_nesting && rdp->rcu_urgent_qs &&
> +		   !rdp->rcu_forced_tick) {

OK.  Though you should be able to save a line by pulling the
"rdp->rcu_urgent_qs &&" onto the first line.

>  		rdp->rcu_forced_tick = true;
>  		tick_dep_set_cpu(rdp->cpu, TICK_DEP_BIT_RCU);
>  	}
> +

Not clear that the added blank line is a win, here or below.

>  	trace_rcu_dyntick(incby == 1 ? TPS("Endirq") : TPS("++="),
> -			  rdp->dynticks_nmi_nesting,
> -			  rdp->dynticks_nmi_nesting + incby, rdp->dynticks);
> +			  rdp->dynticks_nesting,
> +			  rdp->dynticks_nesting + incby, rdp->dynticks);
> +
> +	WRITE_ONCE(rdp->dynticks_nesting, /* Prevent store tearing. */
> +		   rdp->dynticks_nesting + incby);
> +
>  	WRITE_ONCE(rdp->dynticks_nmi_nesting, /* Prevent store tearing. */
> -		   rdp->dynticks_nmi_nesting + incby);
> +		   rdp->dynticks_nmi_nesting + 1);

And same naming issue here.

							Thanx, Paul

>  	barrier();
>  }
>  
> -- 
> 2.23.0.187.g17f5b7556c-goog
> 

Re: [RFC v1 1/2] rcu/tree: Clean up dynticks counter usage

[Joel Fernandes]

On Wed, Aug 28, 2019 at 01:13:44PM -0700, Paul E. McKenney wrote:
> On Mon, Aug 26, 2019 at 09:33:53PM -0400, Joel Fernandes (Google) wrote:
> > The dynticks counter are confusing due to crowbar writes of
> > DYNTICK_IRQ_NONIDLE whose purpose is to detect half-interrupts (i.e. we
> > see rcu_irq_enter() but not rcu_irq_exit() due to a usermode upcall) and
> > if so then do a reset of the dyntick_nmi_nesting counters. This patch
> > tries to get rid of DYNTICK_IRQ_NONIDLE while still keeping the code
> > working, fully functional, and less confusing. The confusion recently
> > has even led to patches forgetting that DYNTICK_IRQ_NONIDLE was written
> > to which wasted lots of time.
> > 
> > The patch has the following changes:
[snip]
> >  /*
> >   * Grace-period counter management.
> >   */
> > diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> > index 68ebf0eb64c8..255cd6835526 100644
> > --- a/kernel/rcu/tree.c
> > +++ b/kernel/rcu/tree.c
> > @@ -81,7 +81,7 @@
> >  
> >  static DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_data, rcu_data) = {
> >  	.dynticks_nesting = 1,
> > -	.dynticks_nmi_nesting = DYNTICK_IRQ_NONIDLE,
> > +	.dynticks_nmi_nesting = 0,
> 
> C initializes to zero by default, so this can simply be deleted.

Fixed.

> >  	.dynticks = ATOMIC_INIT(RCU_DYNTICK_CTRL_CTR),
> >  };
> >  struct rcu_state rcu_state = {
> > @@ -558,17 +558,18 @@ EXPORT_SYMBOL_GPL(rcutorture_get_gp_data);
> >  /*
> >   * Enter an RCU extended quiescent state, which can be either the
> >   * idle loop or adaptive-tickless usermode execution.
> > - *
> > - * We crowbar the ->dynticks_nmi_nesting field to zero to allow for
> > - * the possibility of usermode upcalls having messed up our count
> > - * of interrupt nesting level during the prior busy period.
> >   */
> >  static void rcu_eqs_enter(bool user)
> >  {
> >  	struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
> >  
> > -	WARN_ON_ONCE(rdp->dynticks_nmi_nesting != DYNTICK_IRQ_NONIDLE);
> > -	WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
> > +	/* Entering usermode/idle from interrupt is not handled. These would
> > +	 * mean usermode upcalls or idle entry happened from interrupts. But,
> > +	 * reset the counter if we warn.
> > +	 */
> 
> Please either put the "/*" on its own line or use "//"-style comments.

I'll put "/*" on its own line.

> >  	WARN_ON_ONCE(rdp->dynticks_nmi_nesting <= 0);
> >  	WARN_ON_ONCE(rcu_dynticks_curr_cpu_in_eqs());
> >  
> > +	WRITE_ONCE(rdp->dynticks_nmi_nesting, /* No store tearing. */
> > +		   rdp->dynticks_nmi_nesting - 1);
> 
> This is problematic.  The +/-1 and +/-2 dance is specifically for NMIs, so...

This counter is deleted in the following patch so I hope its Ok to leave it
here for this one. I just kept it split into different patch to make
testing/review/development easier.

> >  	if (irq)
> >  		rcu_prepare_for_idle();
> > @@ -723,10 +728,6 @@ void rcu_irq_exit_irqson(void)
> >  /*
> >   * Exit an RCU extended quiescent state, which can be either the
> >   * idle loop or adaptive-tickless usermode execution.
> > - *
> > - * We crowbar the ->dynticks_nmi_nesting field to DYNTICK_IRQ_NONIDLE to
> > - * allow for the possibility of usermode upcalls messing up our count of
> > - * interrupt nesting level during the busy period that is just now starting.
> >   */
> >  static void rcu_eqs_exit(bool user)
> >  {
> > @@ -747,8 +748,13 @@ static void rcu_eqs_exit(bool user)
> >  	trace_rcu_dyntick(TPS("End"), rdp->dynticks_nesting, 1, rdp->dynticks);
> >  	WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current));
> >  	WRITE_ONCE(rdp->dynticks_nesting, 1);
> > -	WARN_ON_ONCE(rdp->dynticks_nmi_nesting);
> > -	WRITE_ONCE(rdp->dynticks_nmi_nesting, DYNTICK_IRQ_NONIDLE);
> > +
> > +	/* Exiting usermode/idle from interrupt is not handled. These would
> > +	 * mean usermode upcalls or idle exit happened from interrupts. But,
> > +	 * reset the counter if we warn.
> > +	 */
> > +	if (WARN_ON_ONCE(rdp->dynticks_nmi_nesting != 0))
> > +		WRITE_ONCE(rdp->dynticks_nmi_nesting, 0);
> 
> And here.  Plus this is adding a test and branch in the common case.
> Given that the location being written to should be hot in the cache,
> it is not clear that this is a win.

The next patch removes the branch itself and just has the warning.

> >  	WARN_ON_ONCE(rdp->dynticks_nmi_nesting < 0);
> >  
> >  	/*
> > @@ -826,16 +833,21 @@ static __always_inline void rcu_nmi_enter_common(bool irq)
> >  
> >  		incby = 1;
> >  	} else if (tick_nohz_full_cpu(rdp->cpu) &&
> > -		   rdp->dynticks_nmi_nesting == DYNTICK_IRQ_NONIDLE &&
> > -		   rdp->rcu_urgent_qs && !rdp->rcu_forced_tick) {
> > +		   !rdp->dynticks_nmi_nesting && rdp->rcu_urgent_qs &&
> > +		   !rdp->rcu_forced_tick) {
> 
> OK.  Though you should be able to save a line by pulling the
> "rdp->rcu_urgent_qs &&" onto the first line.

Fixed.

> >  		rdp->rcu_forced_tick = true;
> >  		tick_dep_set_cpu(rdp->cpu, TICK_DEP_BIT_RCU);
> >  	}
> > +
> 
> Not clear that the added blank line is a win, here or below.

Fixed,

thanks!

 - Joel

[snip]