* Re: [PATCH] fix 5.15 init regression for Intel Bluetooth [not found] ` <b0f6f66b-28aa-9d43-0aab-e6887ee0fda8@logobject.ch> @ 2021-12-28 7:20 ` Thorsten Leemhuis 2021-12-28 12:52 ` [PATCH] fix 5.15 init regression for Intel Bluetooth #forregzbot Thorsten Leemhuis 0 siblings, 1 reply; 3+ messages in thread From: Thorsten Leemhuis @ 2021-12-28 7:20 UTC (permalink / raw) To: Ortwin Glück, linux-kernel Cc: linux-bluetooth, Marcel Holtmann, Johan Hedberg, Luiz Augusto von Dentz, regressions [TLDR: I'm adding this regression to regzbot, the Linux kernel regression tracking bot; most text you find below is compiled from a few templates paragraphs some of you might have seen already.] On 27.12.21 11:26, Ortwin Glück wrote: > > On all 5.15 kernels the Intel Bluetooth no longer works. All was fine in > 5.14. > Apparently the quirk is needed for this device. > > vanilla 5.15.5: > Bluetooth: hci0: Reading Intel version command failed (-110) > Bluetooth: hci0: command tx timeout > > with patch: > Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 > Bluetooth: hci0: Intel device is already patched. patch num: 32 > > Please apply to stable too. Hi, this is your Linux kernel regression tracker speaking. Thanks for the report. Adding the regression mailing list to the list of recipients, as it should be in the loop for all regressions, as explained here: https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html To be sure this issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, my Linux kernel regression tracking bot: #regzbot ^introduced v5.14..v5.15 #regzbot title bluetooth: Intel Bluetooth no longer works #regzbot ignore-activity Reminder: when fixing the issue, please add a 'Link:' tag with the URL to the report (the parent of this mail) using the kernel.org redirector, as explained in 'Documentation/process/submitting-patches.rst'. Regzbot then will automatically mark the regression as resolved once the fix lands in the appropriate tree. For more details about regzbot see footer. Sending this to everyone that got the initial report, to make all aware of the tracking. I also hope that messages like this motivate people to directly get at least the regression mailing list and ideally even regzbot involved when dealing with regressions, as messages like this wouldn't be needed then. Don't worry, I'll send further messages wrt to this regression just to the lists (with a tag in the subject so people can filter them away), as long as they are intended just for regzbot. With a bit of luck no such messages will be needed anyway. Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression. --- Additional information about regzbot: If you want to know more about regzbot, check out its web-interface, the getting start guide, and/or the references documentation: https://linux-regtracking.leemhuis.info/regzbot/ https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md The last two documents will explain how you can interact with regzbot yourself if your want to. Hint for reporters: when reporting a regression it's in your interest to tell #regzbot about it in the report, as that will ensure the regression gets on the radar of regzbot and the regression tracker. That's in your interest, as they will make sure the report won't fall through the cracks unnoticed. Hint for developers: you normally don't need to care about regzbot once it's involved. Fix the issue as you normally would, just remember to include a 'Link:' tag to the report in the commit message, as explained in Documentation/process/submitting-patches.rst That aspect was recently was made more explicit in commit 1f57bd42b77c: https://git.kernel.org/linus/1f57bd42b77c ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] fix 5.15 init regression for Intel Bluetooth #forregzbot 2021-12-28 7:20 ` [PATCH] fix 5.15 init regression for Intel Bluetooth Thorsten Leemhuis @ 2021-12-28 12:52 ` Thorsten Leemhuis 2021-12-28 13:37 ` Thorsten Leemhuis 0 siblings, 1 reply; 3+ messages in thread From: Thorsten Leemhuis @ 2021-12-28 12:52 UTC (permalink / raw) To: regressions #regzbot dup-of: https://lore.kernel.org/linux-bluetooth/s5h5ys4sjke.wl-tiwai@suse.de/ TWIMC: this mail is primarily send for documentation purposes and for regzbot, my Linux kernel regression tracking bot. These mails usually contain '#forregzbot' in the subject, to make them easy to spot and filter. On 28.12.21 08:20, Thorsten Leemhuis wrote: > [TLDR: I'm adding this regression to regzbot, the Linux kernel > regression tracking bot; most text you find below is compiled from a few > templates paragraphs some of you might have seen already.] > > On 27.12.21 11:26, Ortwin Glück wrote: >> >> On all 5.15 kernels the Intel Bluetooth no longer works. All was fine in >> 5.14. >> Apparently the quirk is needed for this device. >> >> vanilla 5.15.5: >> Bluetooth: hci0: Reading Intel version command failed (-110) >> Bluetooth: hci0: command tx timeout >> >> with patch: >> Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 >> Bluetooth: hci0: Intel device is already patched. patch num: 32 >> >> Please apply to stable too. > > Hi, this is your Linux kernel regression tracker speaking. > > Thanks for the report. > > Adding the regression mailing list to the list of recipients, as it > should be in the loop for all regressions, as explained here: > https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html > > To be sure this issue doesn't fall through the cracks unnoticed, I'm > adding it to regzbot, my Linux kernel regression tracking bot: > > #regzbot ^introduced v5.14..v5.15 > #regzbot title bluetooth: Intel Bluetooth no longer works > #regzbot ignore-activity > > Reminder: when fixing the issue, please add a 'Link:' tag with the URL > to the report (the parent of this mail) using the kernel.org redirector, > as explained in 'Documentation/process/submitting-patches.rst'. Regzbot > then will automatically mark the regression as resolved once the fix > lands in the appropriate tree. For more details about regzbot see footer. > > Sending this to everyone that got the initial report, to make all aware > of the tracking. I also hope that messages like this motivate people to > directly get at least the regression mailing list and ideally even > regzbot involved when dealing with regressions, as messages like this > wouldn't be needed then. > > Don't worry, I'll send further messages wrt to this regression just to > the lists (with a tag in the subject so people can filter them away), as > long as they are intended just for regzbot. With a bit of luck no such > messages will be needed anyway. > > Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). > > P.S.: As a Linux kernel regression tracker I'm getting a lot of reports > on my table. I can only look briefly into most of them. Unfortunately > therefore I sometimes will get things wrong or miss something important. > I hope that's not the case here; if you think it is, don't hesitate to > tell me about it in a public reply. That's in everyone's interest, as > what I wrote above might be misleading to everyone reading this; any > suggestion I gave thus might sent someone reading this down the wrong > rabbit hole, which none of us wants. > > BTW, I have no personal interest in this issue, which is tracked using > regzbot, my Linux kernel regression tracking bot > (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting > this mail to get things rolling again and hence don't need to be CC on > all further activities wrt to this regression. > > --- > Additional information about regzbot: > > If you want to know more about regzbot, check out its web-interface, the > getting start guide, and/or the references documentation: > > https://linux-regtracking.leemhuis.info/regzbot/ > https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md > https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md > > The last two documents will explain how you can interact with regzbot > yourself if your want to. > > Hint for reporters: when reporting a regression it's in your interest to > tell #regzbot about it in the report, as that will ensure the regression > gets on the radar of regzbot and the regression tracker. That's in your > interest, as they will make sure the report won't fall through the > cracks unnoticed. > > Hint for developers: you normally don't need to care about regzbot once > it's involved. Fix the issue as you normally would, just remember to > include a 'Link:' tag to the report in the commit message, as explained > in Documentation/process/submitting-patches.rst > That aspect was recently was made more explicit in commit 1f57bd42b77c: > https://git.kernel.org/linus/1f57bd42b77c > ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] fix 5.15 init regression for Intel Bluetooth #forregzbot 2021-12-28 12:52 ` [PATCH] fix 5.15 init regression for Intel Bluetooth #forregzbot Thorsten Leemhuis @ 2021-12-28 13:37 ` Thorsten Leemhuis 0 siblings, 0 replies; 3+ messages in thread From: Thorsten Leemhuis @ 2021-12-28 13:37 UTC (permalink / raw) To: regressions On 28.12.21 13:52, Thorsten Leemhuis wrote: > #regzbot dup-of: > https://lore.kernel.org/linux-bluetooth/s5h5ys4sjke.wl-tiwai@suse.de/ Sorry for the noise, this is the mail with the report: #regzbot dup-of: https://lore.kernel.org/linux-bluetooth/20211202162256.31837-1-tiwai@suse.de/ > TWIMC: this mail is primarily send for documentation purposes and for > regzbot, my Linux kernel regression tracking bot. These mails usually > contain '#forregzbot' in the subject, to make them easy to spot and filter. > > On 28.12.21 08:20, Thorsten Leemhuis wrote: >> [TLDR: I'm adding this regression to regzbot, the Linux kernel >> regression tracking bot; most text you find below is compiled from a few >> templates paragraphs some of you might have seen already.] >> >> On 27.12.21 11:26, Ortwin Glück wrote: >>> >>> On all 5.15 kernels the Intel Bluetooth no longer works. All was fine in >>> 5.14. >>> Apparently the quirk is needed for this device. >>> >>> vanilla 5.15.5: >>> Bluetooth: hci0: Reading Intel version command failed (-110) >>> Bluetooth: hci0: command tx timeout >>> >>> with patch: >>> Bluetooth: hci0: Legacy ROM 2.5 revision 1.0 build 3 week 17 2014 >>> Bluetooth: hci0: Intel device is already patched. patch num: 32 >>> >>> Please apply to stable too. >> >> Hi, this is your Linux kernel regression tracker speaking. >> >> Thanks for the report. >> >> Adding the regression mailing list to the list of recipients, as it >> should be in the loop for all regressions, as explained here: >> https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html >> >> To be sure this issue doesn't fall through the cracks unnoticed, I'm >> adding it to regzbot, my Linux kernel regression tracking bot: >> >> #regzbot ^introduced v5.14..v5.15 >> #regzbot title bluetooth: Intel Bluetooth no longer works >> #regzbot ignore-activity >> >> Reminder: when fixing the issue, please add a 'Link:' tag with the URL >> to the report (the parent of this mail) using the kernel.org redirector, >> as explained in 'Documentation/process/submitting-patches.rst'. Regzbot >> then will automatically mark the regression as resolved once the fix >> lands in the appropriate tree. For more details about regzbot see footer. >> >> Sending this to everyone that got the initial report, to make all aware >> of the tracking. I also hope that messages like this motivate people to >> directly get at least the regression mailing list and ideally even >> regzbot involved when dealing with regressions, as messages like this >> wouldn't be needed then. >> >> Don't worry, I'll send further messages wrt to this regression just to >> the lists (with a tag in the subject so people can filter them away), as >> long as they are intended just for regzbot. With a bit of luck no such >> messages will be needed anyway. >> >> Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). >> >> P.S.: As a Linux kernel regression tracker I'm getting a lot of reports >> on my table. I can only look briefly into most of them. Unfortunately >> therefore I sometimes will get things wrong or miss something important. >> I hope that's not the case here; if you think it is, don't hesitate to >> tell me about it in a public reply. That's in everyone's interest, as >> what I wrote above might be misleading to everyone reading this; any >> suggestion I gave thus might sent someone reading this down the wrong >> rabbit hole, which none of us wants. >> >> BTW, I have no personal interest in this issue, which is tracked using >> regzbot, my Linux kernel regression tracking bot >> (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting >> this mail to get things rolling again and hence don't need to be CC on >> all further activities wrt to this regression. >> >> --- >> Additional information about regzbot: >> >> If you want to know more about regzbot, check out its web-interface, the >> getting start guide, and/or the references documentation: >> >> https://linux-regtracking.leemhuis.info/regzbot/ >> https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md >> https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md >> >> The last two documents will explain how you can interact with regzbot >> yourself if your want to. >> >> Hint for reporters: when reporting a regression it's in your interest to >> tell #regzbot about it in the report, as that will ensure the regression >> gets on the radar of regzbot and the regression tracker. That's in your >> interest, as they will make sure the report won't fall through the >> cracks unnoticed. >> >> Hint for developers: you normally don't need to care about regzbot once >> it's involved. Fix the issue as you normally would, just remember to >> include a 'Link:' tag to the report in the commit message, as explained >> in Documentation/process/submitting-patches.rst >> That aspect was recently was made more explicit in commit 1f57bd42b77c: >> https://git.kernel.org/linus/1f57bd42b77c >> ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-12-28 13:37 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <856c5dc7-9fb4-8438-3451-7b369832056a@odi.ch> [not found] ` <b0f6f66b-28aa-9d43-0aab-e6887ee0fda8@logobject.ch> 2021-12-28 7:20 ` [PATCH] fix 5.15 init regression for Intel Bluetooth Thorsten Leemhuis 2021-12-28 12:52 ` [PATCH] fix 5.15 init regression for Intel Bluetooth #forregzbot Thorsten Leemhuis 2021-12-28 13:37 ` Thorsten Leemhuis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).