From: Thorsten Leemhuis <firstname.lastname@example.org> To: Jiri Kosina <email@example.com>, Benjamin Tissoires <firstname.lastname@example.org>, email@example.com Cc: Linux Kernel Mailing List <firstname.lastname@example.org>, "email@example.com" <firstname.lastname@example.org>, email@example.com Subject: [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667) Date: Tue, 28 Dec 2021 08:29:40 +0100 [thread overview] Message-ID: <firstname.lastname@example.org> (raw) Hi, this is your Linux kernel regression tracker speaking. Forwarding a regression reported by Christian Casteyde (CCed) in bugzilla.kernel.org which apparently has fallen through the cracks. https://bugzilla.kernel.org/show_bug.cgi?id=214667 A few quotes from comments in the ticket: > Since Kernel 5.14 (probably 5.14-rc5 indeed) the touchpad does not > work anymore after resume from suspend to RAM. Was working with 5.13 > kernel. > > I've bisected the bug, first bad commit is: > b3e29642548258c7cd2cb3326a776fff84cd6b69 is the first bad commit > > SC[33mcommit b3e29642548258c7cd2cb3326a776fff84cd6b69ESC[m Merge: > 8f4ef88 498d0dd Author: Jiri Kosina <email@example.com> Date: Wed Jun > 30 09:15:15 2021 +0200 > > Merge branch 'for-5.14/multitouch' into for-linus > > - patch series that ensures that hid-multitouch driver disables touch > and button-press reporting on hid-mt devices during suspend when the > device is not configured as a wakeup-source, from Hans de Goede > > Seem to be related with the observed behaviour. Yes, that's a merge, but it contains code changes, maybe something went wrong there. > Update with kernel 5.15-rc7 > > Still present. However, I noticed dmesg ouput interesting messages > telling there is a transfer from the ELAN touchpad while suspended, > it failed to suspend, then failed to resume. The interesting thing is > if I try to suspend a second time, at resume the touchpad manages to > resume. Appending dmesg output for reference. > The problem is still present in 5.16-rc7, but indeed it got worse > (and indeed is now critical). a) After the first "suspend" tentative > (closing the lid), the laptop doesn't suspend (only the screen is > blanked) b) When I reopen the lid, the touchpad stays disabled c) > When I try to suspend a second time (closing the lid), the system > totally freeze (without any info in dmesg) and I need to reset it > totally. I'll open a separate bug report for this one, when bisected, > and will try to post it to the suspend maintainer together with the > mailing list (I'm not accustomed to mailing lists). FWIW, Christian did this here: https://lore.kernel.org/all/256689953.114854578.1640622738334.JavaMail.firstname.lastname@example.org/ > FYI, if I remember well, reverting this single commit fixed the issue > and the diff was making sense (try to disable the touchpad before > going to sleep to prevent unexpected event from it while > suspending... if I understood well the code). To be sure this issue doesn't again fall through the cracks unnoticed, I'm adding it to regzbot, my Linux kernel regression tracking bot: #regzbot introduced b3e29642548258c7cd2cb3326a776fff84cd6b69ESC #regzbot title hid: touchpad is not working after suspend to RAM #regzbot from: Christian Casteyde <email@example.com> #regzbot ignore-activity Reminder: when fixing the issue, please add a 'Link:' tag with the URL to the report (the parent of this mail) using the kernel.org redirector, as explained in 'Documentation/process/submitting-patches.rst'. Regzbot then will automatically mark the regression as resolved once the fix lands in the appropriate tree. For more details about regzbot see footer. Sending this to everyone that got the initial report, to make all aware of the tracking. I also hope that messages like this motivate people to directly get at least the regression mailing list and ideally even regzbot involved when dealing with regressions, as messages like this wouldn't be needed then. Don't worry, I'll send further messages wrt to this regression just to the lists (with a tag in the subject so people can filter them away), as long as they are intended just for regzbot. With a bit of luck no such messages will be needed anyway. Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression. --- Additional information about regzbot: If you want to know more about regzbot, check out its web-interface, the getting start guide, and/or the references documentation: https://linux-regtracking.leemhuis.info/regzbot/ https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md The last two documents will explain how you can interact with regzbot yourself if your want to. Hint for reporters: when reporting a regression it's in your interest to tell #regzbot about it in the report, as that will ensure the regression gets on the radar of regzbot and the regression tracker. That's in your interest, as they will make sure the report won't fall through the cracks unnoticed. Hint for developers: you normally don't need to care about regzbot once it's involved. Fix the issue as you normally would, just remember to include a 'Link:' tag to the report in the commit message, as explained in Documentation/process/submitting-patches.rst That aspect was recently was made more explicit in commit 1f57bd42b77c: https://git.kernel.org/linus/1f57bd42b77c
next reply other threads:[~2021-12-28 7:29 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-12-28 7:29 Thorsten Leemhuis [this message] 2022-01-01 13:20 ` [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667) #forregzbot Thorsten Leemhuis 2022-01-10 13:00 ` [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667) Jiri Kosina 2022-01-10 14:58 ` Hans de Goede 2022-01-20 8:17 ` [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667) #forregzbot Thorsten Leemhuis 2022-01-30 9:55 ` Thorsten Leemhuis
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [regression] Touchpad is not working after suspend to RAM since kernel 5.14 (fwd from b.k.o bug 214667)' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).