From: Thorsten Leemhuis <firstname.lastname@example.org> To: "Tareque Md.Hanif" <email@example.com>, "firstname.lastname@example.org" <email@example.com> Cc: "firstname.lastname@example.org" <email@example.com>, "firstname.lastname@example.org" <email@example.com>, "firstname.lastname@example.org" <email@example.com> Subject: Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend Date: Sun, 12 Dec 2021 10:57:21 +0100 [thread overview] Message-ID: <firstname.lastname@example.org> (raw) In-Reply-To: <email@example.com> [TLDR: adding this regression to regzbot; most of this mail is compiled from a few templates paragraphs some of you might have seen already.] Hi, this is your Linux kernel regression tracker speaking. Thanks for the report. Adding the regression mailing list to the list of recipients, as it should be in the loop for all regressions, as explained here: https://www.kernel.org/doc/html/latest/admin-guide/reporting-issues.html To be sure this issue doesn't fall through the cracks unnoticed, I'm adding it to regzbot, my Linux kernel regression tracking bot: #regzbot ^introduced 5a7b95fb993ec399c8a685552aa6a8fc995c40bd #regzbot title drm: amdgpu: apps that need amdgpu do not start after system is woken from suspend #regzbot ignore-activity Reminder: when fixing the issue, please add a 'Link:' tag with the URL to the report (the parent of this mail), then regzbot will automatically mark the regression as resolved once the fix lands in the appropriate tree. For more details about regzbot see footer. Sending this to everyone that got the initial report, to make all aware of the tracking. I also hope that messages like this motivate people to directly get at least the regression mailing list and ideally even regzbot involved when dealing with regressions, as messages like this wouldn't be needed then. Don't worry, I'll send further messages wrt to this regression just to the lists (with a tag in the subject so people can filter them away), as long as they are intended just for regzbot. With a bit of luck no such messages will be needed anyway. Ciao, Thorsten (wearing his 'Linux kernel regression tracker' hat). P.S.: As a Linux kernel regression tracker I'm getting a lot of reports on my table. I can only look briefly into most of them. Unfortunately therefore I sometimes will get things wrong or miss something important. I hope that's not the case here; if you think it is, don't hesitate to tell me about it in a public reply. That's in everyone's interest, as what I wrote above might be misleading to everyone reading this; any suggestion I gave thus might sent someone reading this down the wrong rabbit hole, which none of us wants. BTW, I have no personal interest in this issue, which is tracked using regzbot, my Linux kernel regression tracking bot (https://linux-regtracking.leemhuis.info/regzbot/). I'm only posting this mail to get things rolling again and hence don't need to be CC on all further activities wrt to this regression. On 09.12.21 19:49, Tareque Md.Hanif wrote: > Hi, > I am getting some issues listed below when waking up from suspend on my > laptop. > > Issues: > 1. After waking up from suspend in my laptop, anytime I open a game, the > window is just blank. But it works after reboot or if I don't suspend > the system. > 2. The system takes almost 7-8 seconds to wake up in 5.14 or later but > it's almost instant in 5.13 . > 3. If the laptop is connected with AC and then suspended and woken up, > there are no issues. This issue occurs if laptop is running on battery. > > No issues in Kernel 5.13.13 and the issues exist in 5.14 to 5.15.7 . So > I bisected the bug with > git(https://kernel.googlesource.com/pub/scm/linux/kernel/git/torvalds/linux). > first bad commit: [5a7b95fb993ec399c8a685552aa6a8fc995c40bd] i2c: core: > support bus regulator controlling in adapter > > I have attached full journalctl output of starting the system, then > suspend, then wake up and then running `DRI_PRIME=1 glxgears` (which > make my monitor 1fps) and then shutdown. I have also attached lsmod and > lspci output. > > Kernel version: Linux version 5.15.7-arch1-1 (linux@archlinux) (gcc > (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed, 08 Dec > 2021 14:33:16 +0000 > > Device Information: > Laptop model: Dell Inspiron 15 5567 > GPU 0: Intel HD Graphics 620 > GPU 1: AMD ATI Radeon R7 M445 > > Regards, > Tareque Md Hanif. >
parent reply other threads:[~2021-12-12 9:57 UTC|newest] Thread overview: expand[flat|nested] mbox.gz Atom feed [parent not found: <firstname.lastname@example.org>]
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --firstname.lastname@example.org \ --email@example.com \ --subject='Re: [bisected][regression] Applications that need amdgpu doesn'\''t run after waking up from suspend' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).