Re: laptop does not go to suspend anymore with kernel version > 5.16.10

[Reinhold Mannsberger <reinhold.mannsberger@gmx.at>]

[-- Attachment #1.1: Type: text/plain, Size: 4454 bytes --]

Dear Thorsten!

Thank you for your quick response!

Now that you gave me the advice to check dmesg I found out that the
messages are the same with kernel version 5.16.10 and 5.16.12. But - as
I described - with kernel version 5.16.10 I had to press the power
button to resume from suspend. So I my conclusion that my laptop does
not go to suspend ist apparently wrong. In any case you find excerpts
from dmesg with both kernel versions attached.

Now there is one thing I really would like to understand. Concluding
from the time stamps in dmesg it seems that my laptop goes to suspend
only for a moment right before I re-open the lid. Of course I did not
close my laptop lid only for 3 seconds - as it could be concluded from
the time stamps for "PM: suspend entry (s2idle)" and "PM: suspend exit"
- but for a longer period of time. Can you please enlighten me about
that?


Thank you and best regards,

Reinhold

Am Mittwoch, dem 09.03.2022 um 07:51 +0100 schrieb Thorsten Leemhuis:
> Hi!
>
> On 08.03.22 19:21, Reinhold Mannsberger wrote:
> >
> > I am using Linux Mint Xfce 20.3 with kernel version 5.16. I had to use
> > kernel 5.16 because with the standard kernel version of Linux mit 20.3
> > (which is 5.13) my laptop did not correctly resume, when I closed the
> > lid.
> >
> > With kernel 5.16 my laptop perfectly went to to suspend when I closed
> > the lid and it perfectly resumed, when I opened the lid again. This
> > means: I had to press the power button once
>
> That sounds odd to me, as most modern Laptops wake up automatically when
> you open the lid. It's unlikely, but maybe that just that started to
> work now?
>
> > when I reopened the lid -
> > and then the laptop resumed (to the login screen). This was true until
> > kernel version 5.16.10. With kernel version > 5.16.10 my laptop does
> > not go into suspend anymore. This means: When I open the lid I am back
> > at the login screen immediately (I don't have to press the power button
> > anymore).
>
> You want to check dmesg if the system really didn't go to sleep; it will
> likely also provide a hint of what went wrong. Just upload the output
> (generated after a fresh start and where you suspend and resume once the
> system booted) somewhere and send us a link or sent it as an attachment
> in a reply. If that doesn't provide any hints of what might be wrong,
> you might need to find the change that introduced the problem using a
> bisection.
>
> HTH, Ciao, Thorsten
>
> > System information for my laptop:
> > ----------------------------------------------------------------------
> > System:    Kernel: 5.16.10-051610-generic x86_64 bits: 64 compiler: N/A
> > Desktop: Xfce 4.16.0
> >            tk: Gtk 3.24.20 wm: xfwm4 dm: LightDM Distro: Linux Mint
> > 20.3 Una
> >            base: Ubuntu 20.04 focal
> > Machine:   Type: Laptop System: HP product: HP ProBook 455 G8 Notebook
> > PC v: N/A serial: <filter>
> >            Chassis: type: 10 serial: <filter>
> >            Mobo: HP model: 8864 v: KBC Version 41.1E.00 serial:
> > <filter> UEFI: HP
> >            v: T78 Ver. 01.07.00 date: 10/08/2021
> > Battery:   ID-1: BAT0 charge: 43.8 Wh condition: 44.5/45.0 Wh (99%)
> > volts: 13.0/11.4
> >            model: Hewlett-Packard Primary serial: <filter> status:
> > Unknown
> > CPU:       Topology: 8-Core model: AMD Ryzen 7 5800U with Radeon
> > Graphics bits: 64 type: MT MCP
> >            arch: Zen 3 L2 cache: 4096 KiB
> >            flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a
> > ssse3 svm bogomips: 60685
> >            Speed: 3497 MHz min/max: 1600/1900 MHz Core speeds (MHz): 1:
> > 3474 2: 3464 3: 3473
> >            4: 3471 5: 4362 6: 4332 7: 3478 8: 3455 9: 3459 10: 3452 11:
> > 3462 12: 3468 13: 3468
> >            14: 3468 15: 3467 16: 3472
> > Graphics:  Device-1: AMD vendor: Hewlett-Packard driver: amdgpu v:
> > kernel bus ID: 05:00.0
> >            chip ID: 1002:1638
> >            Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati
> > unloaded: fbdev,modesetting,vesa
> >            resolution: 1920x1080~60Hz
> >            OpenGL: renderer: AMD RENOIR (DRM 3.44.0 5.16.10-051610-
> > generic LLVM 12.0.0)
> >            v: 4.6 Mesa 21.2.6 direct render: Yes
> > ----------------------------------------------------------------------
> >
> >
> > Best regards,
> >
> > Reinhold Mannsberger
> >
> >
> >

[-- Attachment #1.2: Type: text/html, Size: 5746 bytes --]

[-- Attachment #2: dmesg_kernel_5.16.10.txt --]
[-- Type: text/plain, Size: 4358 bytes --]

[    0.000000] Linux version 5.16.10-051610-generic (buildd@lcy02-amd64-032) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #202202181155-Ubuntu SMP PREEMPT Fri Feb 18 12:03:54 UTC 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.10-051610-generic root=UUID=6362c232-c289-4af4-af9c-4306cee22589 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.

...

[  128.688884] PM: suspend entry (s2idle)
[  128.691320] Filesystems sync: 0.002 seconds
[  130.703777] Bluetooth: hci0: Timed out waiting for suspend events
[  130.703787] Bluetooth: hci0: Suspend timeout bit: 9
[  130.703812] Bluetooth: hci0: Suspend notifier action (3) failed: -110
[  130.703818] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  130.705930] OOM killer disabled.
[  130.705930] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[  130.707007] printk: Suspending console(s) (use no_console_suspend to debug)
[  131.025701] ACPI: EC: interrupt blocked
[  131.096541] ACPI: EC: interrupt unblocked
[  131.138242] pci 0000:00:00.2: can't derive routing for PCI INT A
[  131.138246] pci 0000:00:00.2: PCI INT A: no GSI
[  131.139933] [drm] PCIE GART of 1024M enabled.
[  131.139937] [drm] PTB located at 0x000000F400900000
[  131.139953] amdgpu 0000:05:00.0: amdgpu: SMU is resuming...
[  131.142131] amdgpu 0000:05:00.0: amdgpu: dpm has been disabled
[  131.143246] amdgpu 0000:05:00.0: amdgpu: SMU is resumed successfully!
[  131.143840] [drm] DMUB hardware initialized: version=0x0101000A
[  131.146112] nvme nvme0: 16/0/0 default/read/poll queues
[  131.236873] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[  131.237353] [drm] JPEG decode initialized successfully.
[  131.237365] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[  131.237369] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[  131.237372] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[  131.237374] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[  131.237377] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[  131.237379] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[  131.237380] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[  131.237382] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[  131.237384] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[  131.237387] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[  131.237388] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[  131.237390] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[  131.237391] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[  131.237393] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[  131.237394] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[  131.473931] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[  131.638355] OOM killer enabled.
[  131.638356] Restarting tasks ... 
[  131.639577] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[  131.640043] done.
[  131.641513] Bluetooth: hci0: RTL: rom_version status=0 version=3
[  131.641520] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[  131.641579] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[  131.641613] Bluetooth: hci0: RTL: cfg_sz 6, total sz 31422
[  131.643004] PM: suspend exit

[-- Attachment #3: dmesg_kernel_5.16.12.txt --]
[-- Type: text/plain, Size: 4341 bytes --]

[    0.000000] Linux version 5.16.12-051612-generic (buildd@lcy02-amd64-012) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #202203030915-Ubuntu SMP PREEMPT Thu Mar 3 09:22:23 UTC 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.16.12-051612-generic root=UUID=6362c232-c289-4af4-af9c-4306cee22589 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
[    0.000000] x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.

...

[ 3953.342132] PM: suspend entry (s2idle)
[ 3953.345140] Filesystems sync: 0.003 seconds
[ 3955.375058] Bluetooth: hci0: Timed out waiting for suspend events
[ 3955.375069] Bluetooth: hci0: Suspend timeout bit: 9
[ 3955.375095] Bluetooth: hci0: Suspend notifier action (3) failed: -110
[ 3955.375102] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 3955.377737] OOM killer disabled.
[ 3955.377738] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 3955.378880] printk: Suspending console(s) (use no_console_suspend to debug)
[ 3955.563201] ACPI: EC: interrupt blocked
[ 3955.632562] ACPI: EC: interrupt unblocked
[ 3955.675027] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 3955.675034] pci 0000:00:00.2: PCI INT A: no GSI
[ 3955.676654] [drm] PCIE GART of 1024M enabled.
[ 3955.676657] [drm] PTB located at 0x000000F400900000
[ 3955.676667] amdgpu 0000:05:00.0: amdgpu: SMU is resuming...
[ 3955.678135] amdgpu 0000:05:00.0: amdgpu: dpm has been disabled
[ 3955.679302] amdgpu 0000:05:00.0: amdgpu: SMU is resumed successfully!
[ 3955.679896] [drm] DMUB hardware initialized: version=0x0101000A
[ 3955.683118] nvme nvme0: 16/0/0 default/read/poll queues
[ 3955.770943] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[ 3955.771402] [drm] JPEG decode initialized successfully.
[ 3955.771415] amdgpu 0000:05:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
[ 3955.771420] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 3955.771422] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 3955.771423] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 3955.771425] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 3955.771426] amdgpu 0000:05:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 3955.771427] amdgpu 0000:05:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 3955.771429] amdgpu 0000:05:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 3955.771430] amdgpu 0000:05:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 3955.771432] amdgpu 0000:05:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 3955.771434] amdgpu 0000:05:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
[ 3955.771435] amdgpu 0000:05:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
[ 3955.771437] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 3955.771438] amdgpu 0000:05:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 3955.771439] amdgpu 0000:05:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 3956.013587] usb 1-3: reset full-speed USB device number 2 using xhci_hcd
[ 3956.179017] OOM killer enabled.
[ 3956.179020] Restarting tasks ... done.
[ 3956.182175] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000c lmp_ver=0a lmp_subver=8822
[ 3956.184146] Bluetooth: hci0: RTL: rom_version status=0 version=3
[ 3956.184151] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_fw.bin
[ 3956.184166] Bluetooth: hci0: RTL: loading rtl_bt/rtl8822cu_config.bin
[ 3956.184177] Bluetooth: hci0: RTL: cfg_sz 6, total sz 31422
[ 3956.184296] PM: suspend exit