selinux.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Moore <paul@paul-moore.com>
To: netdev@vger.kernel.org
Cc: linux-security-module@vger.kernel.org, selinux@vger.kernel.org,
	Stephen Smalley <stephen.smalley.work@gmail.com>
Subject: [net PATCH] netlabel: fix problems with mapping removal
Date: Fri, 21 Aug 2020 16:34:52 -0400	[thread overview]
Message-ID: <159804209207.16190.14955035148979265114.stgit@sifl> (raw)

This patch fixes two main problems seen when removing NetLabel
mappings: memory leaks and potentially extra audit noise.

The memory leaks are caused by not properly free'ing the mapping's
address selector struct when free'ing the entire entry as well as
not properly cleaning up a temporary mapping entry when adding new
address selectors to an existing entry.  This patch fixes both these
problems such that kmemleak reports no NetLabel associated leaks
after running the SELinux test suite.

The potentially extra audit noise was caused by the auditing code in
netlbl_domhsh_remove_entry() being called regardless of the entry's
validity.  If another thread had already marked the entry as invalid,
but not removed/free'd it from the list of mappings, then it was
possible that an additional mapping removal audit record would be
generated.  This patch fixes this by returning early from the removal
function when the entry was previously marked invalid.  This change
also had the side benefit of improving the code by decreasing the
indentation level of large chunk of code by one (accounting for most
of the diffstat).

Fixes: 63c416887437 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping")
Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
---
 net/netlabel/netlabel_domainhash.c |   59 ++++++++++++++++++------------------
 1 file changed, 30 insertions(+), 29 deletions(-)

diff --git a/net/netlabel/netlabel_domainhash.c b/net/netlabel/netlabel_domainhash.c
index d07de2c0fbc7..f73a8382c275 100644
--- a/net/netlabel/netlabel_domainhash.c
+++ b/net/netlabel/netlabel_domainhash.c
@@ -85,6 +85,7 @@ static void netlbl_domhsh_free_entry(struct rcu_head *entry)
 			kfree(netlbl_domhsh_addr6_entry(iter6));
 		}
 #endif /* IPv6 */
+		kfree(ptr->def.addrsel);
 	}
 	kfree(ptr->domain);
 	kfree(ptr);
@@ -537,6 +538,8 @@ int netlbl_domhsh_add(struct netlbl_dom_map *entry,
 				goto add_return;
 		}
 #endif /* IPv6 */
+		/* cleanup the new entry since we've moved everything over */
+		netlbl_domhsh_free_entry(&entry->rcu);
 	} else
 		ret_val = -EINVAL;
 
@@ -580,6 +583,12 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry,
 {
 	int ret_val = 0;
 	struct audit_buffer *audit_buf;
+	struct netlbl_af4list *iter4;
+	struct netlbl_domaddr4_map *map4;
+#if IS_ENABLED(CONFIG_IPV6)
+	struct netlbl_af6list *iter6;
+	struct netlbl_domaddr6_map *map6;
+#endif /* IPv6 */
 
 	if (entry == NULL)
 		return -ENOENT;
@@ -597,6 +606,9 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry,
 		ret_val = -ENOENT;
 	spin_unlock(&netlbl_domhsh_lock);
 
+	if (ret_val)
+		return ret_val;
+
 	audit_buf = netlbl_audit_start_common(AUDIT_MAC_MAP_DEL, audit_info);
 	if (audit_buf != NULL) {
 		audit_log_format(audit_buf,
@@ -606,40 +618,29 @@ int netlbl_domhsh_remove_entry(struct netlbl_dom_map *entry,
 		audit_log_end(audit_buf);
 	}
 
-	if (ret_val == 0) {
-		struct netlbl_af4list *iter4;
-		struct netlbl_domaddr4_map *map4;
-#if IS_ENABLED(CONFIG_IPV6)
-		struct netlbl_af6list *iter6;
-		struct netlbl_domaddr6_map *map6;
-#endif /* IPv6 */
-
-		switch (entry->def.type) {
-		case NETLBL_NLTYPE_ADDRSELECT:
-			netlbl_af4list_foreach_rcu(iter4,
-					     &entry->def.addrsel->list4) {
-				map4 = netlbl_domhsh_addr4_entry(iter4);
-				cipso_v4_doi_putdef(map4->def.cipso);
-			}
+	switch (entry->def.type) {
+	case NETLBL_NLTYPE_ADDRSELECT:
+		netlbl_af4list_foreach_rcu(iter4, &entry->def.addrsel->list4) {
+			map4 = netlbl_domhsh_addr4_entry(iter4);
+			cipso_v4_doi_putdef(map4->def.cipso);
+		}
 #if IS_ENABLED(CONFIG_IPV6)
-			netlbl_af6list_foreach_rcu(iter6,
-					     &entry->def.addrsel->list6) {
-				map6 = netlbl_domhsh_addr6_entry(iter6);
-				calipso_doi_putdef(map6->def.calipso);
-			}
+		netlbl_af6list_foreach_rcu(iter6, &entry->def.addrsel->list6) {
+			map6 = netlbl_domhsh_addr6_entry(iter6);
+			calipso_doi_putdef(map6->def.calipso);
+		}
 #endif /* IPv6 */
-			break;
-		case NETLBL_NLTYPE_CIPSOV4:
-			cipso_v4_doi_putdef(entry->def.cipso);
-			break;
+		break;
+	case NETLBL_NLTYPE_CIPSOV4:
+		cipso_v4_doi_putdef(entry->def.cipso);
+		break;
 #if IS_ENABLED(CONFIG_IPV6)
-		case NETLBL_NLTYPE_CALIPSO:
-			calipso_doi_putdef(entry->def.calipso);
-			break;
+	case NETLBL_NLTYPE_CALIPSO:
+		calipso_doi_putdef(entry->def.calipso);
+		break;
 #endif /* IPv6 */
-		}
-		call_rcu(&entry->rcu, netlbl_domhsh_free_entry);
 	}
+	call_rcu(&entry->rcu, netlbl_domhsh_free_entry);
 
 	return ret_val;
 }


             reply	other threads:[~2020-08-21 20:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-21 20:34 Paul Moore [this message]
2020-08-24 23:08 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=159804209207.16190.14955035148979265114.stgit@sifl \
    --to=paul@paul-moore.com \
    --cc=linux-security-module@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=selinux@vger.kernel.org \
    --cc=stephen.smalley.work@gmail.com \
    --subject='Re: [net PATCH] netlabel: fix problems with mapping removal' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).