SELinux Archive on lore.kernel.org
 help / color / Atom feed
From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>,
	Andy Lutomirski <luto@kernel.org>,
	Cedric Xing <cedric.xing@intel.com>,
	James Morris <jmorris@namei.org>,
	"Serge E . Hallyn" <serge@hallyn.com>,
	LSM List <linux-security-module@vger.kernel.org>,
	Paul Moore <paul@paul-moore.com>,
	Eric Paris <eparis@parisplace.org>,
	selinux@vger.kernel.org, Jethro Beekman <jethro@fortanix.com>,
	Dave Hansen <dave.hansen@intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>, X86 ML <x86@kernel.org>,
	linux-sgx@vger.kernel.org,
	Andrew Morton <akpm@linux-foundation.org>,
	nhorman@redhat.com, npmccallum@redhat.com,
	Serge Ayoun <serge.ayoun@intel.com>,
	Shay Katz-zamir <shay.katz-zamir@intel.com>,
	Haitao Huang <haitao.huang@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Kai Svahn <kai.svahn@intel.com>, Borislav Petkov <bp@alien8.de>,
	Josh Triplett <josh@joshtriplett.org>,
	Kai Huang <kai.huang@intel.com>,
	David Rientjes <rientjes@google.com>,
	William Roberts <william.c.roberts@intel.com>,
	Philip Tricca <philip.b.tricca@intel.com>
Subject: Re: [RFC PATCH v2 5/5] security/selinux: Add enclave_load() implementation
Date: Mon, 10 Jun 2019 09:46:50 -0700
Message-ID: <20190610164650.GE15995@linux.intel.com> (raw)
In-Reply-To: <ca77e597-69de-9db4-f88a-26881ab53680@tycho.nsa.gov>

On Fri, Jun 07, 2019 at 05:16:01PM -0400, Stephen Smalley wrote:
> On 6/5/19 10:11 PM, Sean Christopherson wrote:
> >The goal of selinux_enclave_load() is to provide a facsimile of the
> >existing selinux_file_mprotect() and file_map_prot_check() policies,
> >but tailored to the unique properties of SGX.
> >
> >For example, an enclave page is technically backed by a MAP_SHARED file,
> >but the "file" is essentially shared memory that is never persisted
> >anywhere and also requires execute permissions (for some pages).
> >
> >The basic concept is to require appropriate execute permissions on the
> >source of the enclave for pages that are requesting PROT_EXEC, e.g. if
> >an enclave page is being loaded from a regular file, require
> >FILE__EXECUTE and/or FILE__EXECMOND, and if it's coming from an
> >anonymous/private mapping, require PROCESS__EXECMEM since the process
> >is essentially executing from the mapping, albeit in a roundabout way.
> >
> >Note, FILE__READ and FILE__WRITE are intentionally not required even if
> >the source page is backed by a regular file.  Writes to the enclave page
> >are contained to the EPC, i.e. never hit the original file, and read
> >permissions have already been vetted (or the VMA doesn't have PROT_READ,
> >in which case loading the page into the enclave will fail).
> >
> >Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> >---
> >  security/selinux/hooks.c | 69 ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 69 insertions(+)
> >
> >diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
> >index 3ec702cf46ca..3c5418edf51c 100644
> >--- a/security/selinux/hooks.c
> >+++ b/security/selinux/hooks.c
> >@@ -6726,6 +6726,71 @@ static void selinux_bpf_prog_free(struct bpf_prog_aux *aux)
> >  }
> >  #endif
> >+#ifdef CONFIG_INTEL_SGX
> >+int selinux_enclave_load(struct vm_area_struct *vma, unsigned long prot)
> >+{
> >+	const struct cred *cred = current_cred();
> >+	u32 sid = cred_sid(cred);
> >+	int ret;
> >+
> >+	/* SGX is supported only in 64-bit kernels. */
> >+	WARN_ON_ONCE(!default_noexec);
> >+
> >+	/* Only executable enclave pages are restricted in any way. */
> >+	if (!(prot & PROT_EXEC))
> >+		return 0;
> 
> prot/PROT_EXEC or vmflags/VM_EXEC
> 
> >+
> >+	/*
> >+	 * The source page is exectuable, i.e. has already passed SELinux's
> 
> executable
> 
> >+	 * checks, and userspace is not requesting RW->RX capabilities.
> 
> Is it requesting W->X or WX?

Hmm, good point.  I'll reword the "requesting RW->RX" and "RW->RX intent"
phrases to make it clear that we don't actually know whether userspace
intends to do W->X or WX, and I'll also expand the "Note, this hybrid
EXECMOD and EXECMEM behavior" comment to explain that existing checks
won't prevent WX.

> >+	 */
> >+	if ((vma->vm_flags & VM_EXEC) && !(prot & PROT_WRITE))
> >+		return 0;
> >+
> >+	/*
> >+	 * The source page is not executable, or userspace is requesting the
> >+	 * ability to do a RW->RX conversion.  Permissions are required as
> >+	 * follows, in order of increasing privelege:
> >+	 *
> >+	 * EXECUTE - Load an executable enclave page without RW->RX intent from
> >+	 *           a non-executable vma that is backed by a shared mapping to
> >+	 *           a regular file that has not undergone COW.
> 
> Shared mapping or unmodified private file mapping

Doh, messed that up.  Thanks!

> >+	 *
> >+	 * EXECMOD - Load an executable enclave page without RW->RX intent from
> >+	 *           a non-executable vma that is backed by a shared mapping to
> >+	 *           a regular file that *has* undergone COW.
> 
> modified private file mapping (write to shared mapping won't trigger COW; it
> would have been checked by FILE__WRITE earlier)

Same mental error.  Will fix.

> >+	 *
> >+	 *         - Load an enclave page *with* RW->RX intent from a shared
> >+	 *           mapping to a regular file.
> >+	 *
> >+	 * EXECMEM - Load an exectuable enclave page from an anonymous mapping.
> 
> executable
> 
> >+	 *
> >+	 *         - Load an exectuable enclave page from a private file, e.g.
> 
> executable

At least I'm consistent.

> >+	 *           from a shared mapping to a hugetlbfs file.
> >+	 *
> >+	 *         - Load an enclave page *with* RW->RX intent from a private
> 
> W->X or WX?
>
> >+	 *           mapping to a regular file.
> >+	 *
> >+	 * Note, this hybrid EXECMOD and EXECMEM behavior is intentional and
> >+	 * reflects the nature of enclaves and the EPC, e.g. EPC is effectively
> >+	 * a non-persistent shared file, but each enclave is a private domain
> >+	 * within that shared file, so delegate to the source of the enclave.
> >+	 */
> >+	if (vma->vm_file && !IS_PRIVATE(file_inode(vma->vm_file) &&
> >+	    ((vma->vm_flags & VM_SHARED) || !(prot & PROT_WRITE)))) {
> >+		if (!vma->anon_vma && !(prot & PROT_WRITE))
> >+			ret = file_has_perm(cred, vma->vm_file, FILE__EXECUTE);
> >+		else
> >+			ret = file_has_perm(cred, vma->vm_file, FILE__EXECMOD);
> >+	} else {
> >+		ret = avc_has_perm(&selinux_state,
> >+				   sid, sid, SECCLASS_PROCESS,
> >+				   PROCESS__EXECMEM, NULL);
> >+	}
> >+	return ret;
> >+}
> >+#endif
> >+
> >  struct lsm_blob_sizes selinux_blob_sizes __lsm_ro_after_init = {
> >  	.lbs_cred = sizeof(struct task_security_struct),
> >  	.lbs_file = sizeof(struct file_security_struct),
> >@@ -6968,6 +7033,10 @@ static struct security_hook_list selinux_hooks[] __lsm_ro_after_init = {
> >  	LSM_HOOK_INIT(bpf_map_free_security, selinux_bpf_map_free),
> >  	LSM_HOOK_INIT(bpf_prog_free_security, selinux_bpf_prog_free),
> >  #endif
> >+
> >+#ifdef CONFIG_INTEL_SGX
> >+	LSM_HOOK_INIT(enclave_load, selinux_enclave_load),
> >+#endif
> >  };
> >  static __init int selinux_init(void)
> >
> 

  reply index

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-06  2:11 [RFC PATCH v2 0/5] security: x86/sgx: SGX vs. LSM Sean Christopherson
2019-06-06  2:11 ` [RFC PATCH v2 1/5] mm: Introduce vm_ops->may_mprotect() Sean Christopherson
2019-06-10 15:06   ` Jarkko Sakkinen
2019-06-10 15:55     ` Sean Christopherson
2019-06-10 17:47       ` Xing, Cedric
2019-06-10 19:49         ` Sean Christopherson
2019-06-10 22:06           ` Xing, Cedric
2019-06-06  2:11 ` [RFC PATCH v2 2/5] x86/sgx: Require userspace to define enclave pages' protection bits Sean Christopherson
2019-06-10 15:27   ` Jarkko Sakkinen
2019-06-10 16:15     ` Sean Christopherson
2019-06-10 17:45       ` Jarkko Sakkinen
2019-06-10 18:17         ` Sean Christopherson
2019-06-12 19:26           ` Jarkko Sakkinen
2019-06-10 18:29   ` Xing, Cedric
2019-06-10 19:15     ` Andy Lutomirski
2019-06-10 22:28       ` Xing, Cedric
2019-06-12  0:09         ` Andy Lutomirski
2019-06-12 14:34           ` Sean Christopherson
2019-06-12 18:20             ` Xing, Cedric
2019-06-06  2:11 ` [RFC PATCH v2 3/5] x86/sgx: Enforce noexec filesystem restriction for enclaves Sean Christopherson
2019-06-10 16:00   ` Jarkko Sakkinen
2019-06-10 16:44     ` Andy Lutomirski
2019-06-11 17:21       ` Stephen Smalley
2019-06-06  2:11 ` [RFC PATCH v2 4/5] LSM: x86/sgx: Introduce ->enclave_load() hook for Intel SGX Sean Christopherson
2019-06-07 19:58   ` Stephen Smalley
2019-06-10 16:21     ` Sean Christopherson
2019-06-10 16:05   ` Jarkko Sakkinen
2019-06-06  2:11 ` [RFC PATCH v2 5/5] security/selinux: Add enclave_load() implementation Sean Christopherson
2019-06-07 21:16   ` Stephen Smalley
2019-06-10 16:46     ` Sean Christopherson [this message]
2019-06-17 16:38   ` Jarkko Sakkinen
2019-06-10  7:03 ` [RFC PATCH v1 0/3] security/x86/sgx: SGX specific LSM hooks Cedric Xing
2019-06-10  7:03   ` [RFC PATCH v1 1/3] LSM/x86/sgx: Add " Cedric Xing
2019-06-10  7:03   ` [RFC PATCH v1 2/3] LSM/x86/sgx: Implement SGX specific hooks in SELinux Cedric Xing
2019-06-11 13:40     ` Stephen Smalley
2019-06-11 22:02       ` Sean Christopherson
2019-06-12  9:32         ` Dr. Greg
2019-06-12 14:25           ` Sean Christopherson
2019-06-13  7:25             ` Dr. Greg
2019-06-12 19:30         ` Andy Lutomirski
2019-06-12 22:02           ` Sean Christopherson
2019-06-13  0:10             ` Xing, Cedric
2019-06-13  1:02             ` Xing, Cedric
2019-06-13 17:02         ` Stephen Smalley
2019-06-13 23:03           ` Xing, Cedric
2019-06-13 23:17             ` Sean Christopherson
2019-06-14  0:31               ` Xing, Cedric
2019-06-14  0:46           ` Sean Christopherson
2019-06-14 15:38             ` Sean Christopherson
2019-06-16 22:14               ` Andy Lutomirski
2019-06-17 16:49                 ` Sean Christopherson
2019-06-17 17:08                   ` Andy Lutomirski
2019-06-18 15:40                   ` Dr. Greg
2019-06-14 17:16             ` Xing, Cedric
2019-06-14 17:45               ` Sean Christopherson
2019-06-14 17:53                 ` Sean Christopherson
2019-06-14 20:01                   ` Sean Christopherson
2019-06-16 22:16               ` Andy Lutomirski
2019-06-14 23:19             ` Dr. Greg
2019-06-11 22:55       ` Xing, Cedric
2019-06-13 18:00         ` Stephen Smalley
2019-06-13 19:48           ` Sean Christopherson
2019-06-13 21:09             ` Xing, Cedric
2019-06-13 21:02           ` Xing, Cedric
2019-06-14  0:37           ` Sean Christopherson
2019-06-10  7:03   ` [RFC PATCH v1 3/3] LSM/x86/sgx: Call new LSM hooks from SGX subsystem Cedric Xing
2019-06-10 17:36   ` [RFC PATCH v1 0/3] security/x86/sgx: SGX specific LSM hooks Jarkko Sakkinen

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190610164650.GE15995@linux.intel.com \
    --to=sean.j.christopherson@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bp@alien8.de \
    --cc=cedric.xing@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=eparis@parisplace.org \
    --cc=haitao.huang@intel.com \
    --cc=jarkko.sakkinen@linux.intel.com \
    --cc=jethro@fortanix.com \
    --cc=jmorris@namei.org \
    --cc=josh@joshtriplett.org \
    --cc=kai.huang@intel.com \
    --cc=kai.svahn@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=linux-sgx@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=nhorman@redhat.com \
    --cc=npmccallum@redhat.com \
    --cc=paul@paul-moore.com \
    --cc=philip.b.tricca@intel.com \
    --cc=rientjes@google.com \
    --cc=sds@tycho.nsa.gov \
    --cc=selinux@vger.kernel.org \
    --cc=serge.ayoun@intel.com \
    --cc=serge@hallyn.com \
    --cc=shay.katz-zamir@intel.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    --cc=william.c.roberts@intel.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

SELinux Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/selinux/0 selinux/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 selinux selinux/ https://lore.kernel.org/selinux \
		selinux@vger.kernel.org selinux@archiver.kernel.org
	public-inbox-index selinux


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.selinux


AGPL code for this site: git clone https://public-inbox.org/ public-inbox