* [RFC PATCH] selinux-testsuite: Run tests using remote server
@ 2020-04-20 13:21 Richard Haines
0 siblings, 0 replies; only message in thread
From: Richard Haines @ 2020-04-20 13:21 UTC (permalink / raw)
To: selinux; +Cc: Richard Haines
This RFC patch will allow another server with the testsuite installed to
act as a remote server. The main tests will be run on the client system,
with the remotely enabled server components running on the remote server.
This version updates the inet_socket and sctp tests to run their server
components on the remote system controlled by ncat(1).
The README.md contains instructions for setting up & running.
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
---
README.md | 132 ++++
policy/test_inet_socket.te | 2 +
policy/test_sctp.te | 2 +
tests/inet_socket/calipso-load | 3 +-
tests/inet_socket/cipso-fl-load | 2 +-
.../inet_socket/{cipso-load-t1 => cipso-load} | 4 +-
tests/inet_socket/cipso-load-t2 | 11 -
tests/inet_socket/cipso-load-t5 | 11 -
tests/inet_socket/client.c | 11 +-
tests/inet_socket/ipsec-load | 20 +-
tests/inet_socket/start_remote_svr | 3 +
tests/inet_socket/stop_remote_svr | 3 +
tests/inet_socket/test | 444 +++++++++---
tests/sctp/calipso-load | 2 +-
tests/sctp/{cipso-load-t2 => cipso-load} | 4 +-
tests/sctp/cipso-load-t1 | 7 -
tests/sctp/cipso-load-t5 | 7 -
tests/sctp/sctp_asconf_params_client.c | 10 +-
tests/sctp/sctp_asconf_params_server.c | 2 +-
tests/sctp/start_remote_svr | 3 +
tests/sctp/stop_remote_svr | 3 +
tests/sctp/test | 671 +++++++++++++-----
tools/remote.cfg | 27 +
tools/remote.sh | 92 +++
24 files changed, 1166 insertions(+), 310 deletions(-)
rename tests/inet_socket/{cipso-load-t1 => cipso-load} (72%)
delete mode 100644 tests/inet_socket/cipso-load-t2
delete mode 100644 tests/inet_socket/cipso-load-t5
create mode 100644 tests/inet_socket/start_remote_svr
create mode 100644 tests/inet_socket/stop_remote_svr
rename tests/sctp/{cipso-load-t2 => cipso-load} (58%)
delete mode 100644 tests/sctp/cipso-load-t1
delete mode 100644 tests/sctp/cipso-load-t5
create mode 100644 tests/sctp/start_remote_svr
create mode 100644 tests/sctp/stop_remote_svr
create mode 100644 tools/remote.cfg
create mode 100755 tools/remote.sh
diff --git a/README.md b/README.md
index 27c9d56..89722cf 100644
--- a/README.md
+++ b/README.md
@@ -282,3 +282,135 @@ directory (based on the path of the script executable). This won't always be
accurate, but will work for this test harness/configuration.
$basedir = $0; $basedir =~ s|(.*)/[^/]*|$1|;
+
+
+# REMOTE SERVER TESTING
+
+It is possible to run tests with remotely enabled server components on a
+remote server using `ncat`. The currently enabled tests are `inet_socket`
+and `sctp`. The requirements are a client system that would run the complete
+test-suite and a server that runs the test server components under the
+control of `ncat`. The IP address setup requirements are:
+
+The mandatory Client addresses are:
+
+1. One IPv4 address for IPv4 network tests.
+
+2. One IPv6 address for IPv6 network tests - This must not (currently) be a
+local link address as there are issues with these on some IPSEC/CALIPSO tests.
+
+
+The mandatory Server addresses are:
+
+1. One IPv4 or IPv6 address for the `ncat` client/server control session. This
+must not be used for test traffic that consists of IPSEC, CIPSO and CALIPSO
+streams.
+
+2. One IPv4 address for IPv4 network tests.
+
+3. One IPv6 address for IPv6 network tests - This must not (currently) be a
+local link address.
+
+If SCTP/ASCONF testing is required, then a second server IPv6 address needs
+to be configured. This maybe a local link address, however it must have the
+interface name appended, e.g. `addr%ifname`.
+
+The following diagram shows the setup that is configured via a common
+`remote.cfg` configuration file that is installed on both servers.
+
+```
+ ncat(1) Control Link
+ +------------------------------------------+
+ | |
+ +-------+-------+ +-------+-------+
+ | +--- IPv4/6 Test Link 1 ---+ |
+ | Client | | Server |
+ | +--- IPv6 Test Link 2 ---+ |
+ +---------------+ +---------------+
+```
+
+## Installation
+
+Both Client and Server systems should have all the standard packages installed
+for the selinux-testsuite. While both should be the at same level, only the
+kernel version is checked that it supports the SCTP tests.
+
+On Fedora the `nmap-ncat` package must be installed with the following
+command:
+
+ # dnf install nmap-ncat
+
+Other Linux distributions should have a similar package.
+
+The common `tools/remote.cfg` file must be configured with the mandatory
+IP addresses and installed on both systems as described in the next section.
+
+
+## `remote.cfg` Configuration File
+
+Below is an example `remote.cfg` configuration file that shows the information
+required. Edit the `tools/remote.cfg` file to suit the test setup and install
+on both systems.
+
+```
+# Client -> Server address. Do not use the same ncat_host address for any
+# test server traffic as IPSEC, CIPSO & CALIPSO will cause protocol errors.
+ncat_host=193.168.1.65
+ncat_port=9999
+
+###########################################################################
+# NOTE: The c_ipv6_1 and s_ipv6_1 MUST be full IPv6 addresses. Using local
+# link addresses work for some tests, however IPSEC & CALIPSO fail for some
+# as yet unknown reason.
+###########################################################################
+
+# Client side MUST have one of each IPv4 and IPv6 addresses
+c_ipv4_1=192.168.1.198
+c_ipv6_1=2a00:23c6:278e:c901:3bf7:29c9:2139:91d0
+# The ifname is ONLY required for Client side if the Server side s_ipv6_1 is
+# an IPv6 local link address, as the client will use 's_ipv6_1%c_ifname' for
+# the server address (however see above note).
+c_ifname=
+
+# Server side MUST have one of each IPv4 and IPv6 addresses.
+# If testing SCTP for add/remove bindx addresses and inform the client
+# side via ASCONF chunks test, then an additional IPv6 address is required.
+# If it is a local link address, it MUST have the server side ifname
+# associated to it.
+s_ipv4_1=192.168.1.148
+s_ipv6_1=2a00:23c6:278e:c901:ff65:b87b:a84d:29a8
+s_ipv6_2=fe80::7f74:f41a:3c70:d333%enp9s0
+```
+
+## Running The Tests
+
+Once both systems are configured and the test-suite has been successfully
+run locally on each system, on the Remote Server run:
+
+ # cd selinux-testsuite
+ # ./tools/remote.sh -l
+
+The `remote.sh` script will load the policy, make the executables, then
+run any additional commands to allow the server side tests to complete (for
+example IPSEC and SCTP require additional firewall rules). Finally it runs
+`ncat` to listen on the configured port.
+
+To run the complete test-suite on the Client Server run:
+
+ # cd selinux-testsuite
+ # ./tools/remote.sh
+
+The `remote.sh` script will load the policy, make the executables, then
+run any additional commands to allow the server side tests to complete (for
+example SCTP requires additional firewall rules).
+
+Optionally any single test can be run, however `inet_socket` and `sctp` are
+the only relevant ones enabled. To run `inet_socket`:
+
+ # cd selinux-testsuite
+ # ./tools/remote.sh inet_socket
+
+`sctp` can also be run with the `-v` option.
+
+Note that the test policy must be loaded if individual tests are run as the
+script only runs `make` for these.
diff --git a/policy/test_inet_socket.te b/policy/test_inet_socket.te
index bf839df..39e003b 100644
--- a/policy/test_inet_socket.te
+++ b/policy/test_inet_socket.te
@@ -35,6 +35,8 @@ corenet_inout_generic_node(test_inet_server_t)
# For writing to flag file:
allow test_inet_server_t test_file_t:fifo_file rw_file_perms;
+# Remote tests on client side for flag file:
+userdom_search_user_home_content(test_inet_server_t)
# We need to ensure that the test domain is MCS constrained.
## newer systems, e.g. Fedora and RHEL >= 7.x
diff --git a/policy/test_sctp.te b/policy/test_sctp.te
index df8606e..ba7d590 100644
--- a/policy/test_sctp.te
+++ b/policy/test_sctp.te
@@ -152,6 +152,8 @@ corenet_sctp_bind_all_nodes(test_sctp_set_peer_addr_t)
corenet_inout_generic_node(test_sctp_set_peer_addr_t)
corenet_inout_generic_if(test_sctp_set_peer_addr_t)
+allow test_sctp_set_peer_addr_t test_sctp_client_t:sctp_socket { connect };
+
#
######################### SECMARK-specific policy ############################
#
diff --git a/tests/inet_socket/calipso-load b/tests/inet_socket/calipso-load
index 4bb9c7f..253b0b1 100644
--- a/tests/inet_socket/calipso-load
+++ b/tests/inet_socket/calipso-load
@@ -4,4 +4,5 @@ netlabelctl calipso add pass doi:16
netlabelctl map del default
netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:::1 protocol:calipso,16
+netlabelctl map add default address:$1 protocol:calipso,16
+#netlabelctl -p map list
diff --git a/tests/inet_socket/cipso-fl-load b/tests/inet_socket/cipso-fl-load
index 3fbc928..fb62577 100644
--- a/tests/inet_socket/cipso-fl-load
+++ b/tests/inet_socket/cipso-fl-load
@@ -12,4 +12,4 @@ netlabelctl cipsov4 add local doi:1
netlabelctl map del default
netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,1
+netlabelctl map add default address:$1 protocol:cipsov4,1
diff --git a/tests/inet_socket/cipso-load-t1 b/tests/inet_socket/cipso-load
similarity index 72%
rename from tests/inet_socket/cipso-load-t1
rename to tests/inet_socket/cipso-load
index 974e746..e877796 100644
--- a/tests/inet_socket/cipso-load-t1
+++ b/tests/inet_socket/cipso-load
@@ -4,8 +4,8 @@
# Modifications:
# - Defined a doi for testing loopback for CIPSOv4.
-netlabelctl cipsov4 add pass doi:16 tags:1
+netlabelctl cipsov4 add pass doi:16 tags:$1
netlabelctl map del default
netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
+netlabelctl map add default address:$2 protocol:cipsov4,16
diff --git a/tests/inet_socket/cipso-load-t2 b/tests/inet_socket/cipso-load-t2
deleted file mode 100644
index 9892f81..0000000
--- a/tests/inet_socket/cipso-load-t2
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Based on http://paulmoore.livejournal.com/7234.html.
-#
-# Modifications:
-# - Defined a doi for testing loopback for CIPSOv4.
-
-netlabelctl cipsov4 add pass doi:16 tags:2
-netlabelctl map del default
-netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
-netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/inet_socket/cipso-load-t5 b/tests/inet_socket/cipso-load-t5
deleted file mode 100644
index 662747d..0000000
--- a/tests/inet_socket/cipso-load-t5
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Based on http://paulmoore.livejournal.com/7234.html.
-#
-# Modifications:
-# - Defined a doi for testing loopback for CIPSOv4.
-
-netlabelctl cipsov4 add pass doi:16 tags:5
-netlabelctl map del default
-netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
-netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/inet_socket/client.c b/tests/inet_socket/client.c
index f8780d9..fa153ab 100644
--- a/tests/inet_socket/client.c
+++ b/tests/inet_socket/client.c
@@ -19,11 +19,12 @@
void usage(char *progname)
{
fprintf(stderr,
- "usage: %s [-e expected_msg] [stream|dgram] addr port\n"
+ "usage: %s [-e expected_msg] [-r] [stream|dgram] addr port\n"
"\nWhere:\n\t"
"-e Optional expected message from server e.g. \"nopeer\".\n\t"
" If not present the client context will be used as a\n\t"
" comparison with the servers reply.\n\t"
+ "-r When running remote tests client prints server response\n\t"
"stream Use TCP protocol or:\n\t"
"dgram use UDP protocol.\n\t"
"addr IPv4 or IPv6 address (e.g. 127.0.0.1 or ::1)\n\t"
@@ -37,12 +38,16 @@ int main(int argc, char **argv)
int sock, result, opt;
struct addrinfo hints, *serverinfo;
struct timeval tm;
+ bool remote = false;
- while ((opt = getopt(argc, argv, "e:")) != -1) {
+ while ((opt = getopt(argc, argv, "e:r")) != -1) {
switch (opt) {
case 'e':
expected = optarg;
break;
+ case 'r':
+ remote = true;
+ break;
default:
usage(argv[0]);
}
@@ -137,6 +142,8 @@ int main(int argc, char **argv)
fprintf(stderr, "%s: expected %s, got %s\n",
argv[0], expected, label);
exit(11);
+ } else if (remote) {
+ printf("Server sent: %s\n", label);
}
close(sock);
diff --git a/tests/inet_socket/ipsec-load b/tests/inet_socket/ipsec-load
index 21e2dfe..e0a050d 100644
--- a/tests/inet_socket/ipsec-load
+++ b/tests/inet_socket/ipsec-load
@@ -3,15 +3,13 @@ echo 0 > /proc/sys/net/ipv4/conf/lo/disable_xfrm
echo 0 > /proc/sys/net/ipv4/conf/lo/disable_policy
ip xfrm policy flush
ip xfrm state flush
-goodclientcon=`secon -u --pid $$`:`secon -r --pid $$`:test_inet_client_t:`secon -m --pid $$`
-badclientcon=`secon -u --pid $$`:`secon -r --pid $$`:test_inet_bad_client_t:`secon -m --pid $$`
-ip xfrm state add src 127.0.0.1 dst 127.0.0.1 proto ah spi 0x200 ctx $goodclientcon auth sha1 0123456789012345
-ip xfrm state add src 127.0.0.1 dst 127.0.0.1 proto ah spi 0x250 ctx $badclientcon auth sha1 0123456789012345
-ip xfrm policy add src 127.0.0.1 dst 127.0.0.1 proto tcp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
-ip xfrm policy add src 127.0.0.1 dst 127.0.0.1 proto udp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
-# IPv6 loopback
-ip xfrm state add src ::1 dst ::1 proto ah spi 0x200 ctx $goodclientcon auth sha1 0123456789012345
-ip xfrm state add src ::1 dst ::1 proto ah spi 0x250 ctx $badclientcon auth sha1 0123456789012345
-ip xfrm policy add src ::1 dst ::1 proto tcp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
-ip xfrm policy add src ::1 dst ::1 proto udp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
+ip -4 xfrm state add src $3 dst $4 proto ah spi 0x200 ctx $1 auth sha1 0123456789012345
+ip -4 xfrm state add src $3 dst $4 proto ah spi 0x250 ctx $2 auth sha1 0123456789012345
+ip -4 xfrm policy add src $3 dst $4 proto tcp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
+ip -4 xfrm policy add src $3 dst $4 proto udp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
+
+ip -6 xfrm state add src $5 dst $6 proto ah spi 0x200 ctx $1 auth sha1 0123456789012345
+ip -6 xfrm state add src $5 dst $6 proto ah spi 0x250 ctx $2 auth sha1 0123456789012345
+ip -6 xfrm policy add src $5 dst $6 proto tcp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
+ip -6 xfrm policy add src $5 dst $6 proto udp dir out ctx "system_u:object_r:test_spd_t:s0" tmpl proto ah mode transport level required
diff --git a/tests/inet_socket/start_remote_svr b/tests/inet_socket/start_remote_svr
new file mode 100644
index 0000000..57d2774
--- /dev/null
+++ b/tests/inet_socket/start_remote_svr
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+$1 & disown
diff --git a/tests/inet_socket/stop_remote_svr b/tests/inet_socket/stop_remote_svr
new file mode 100644
index 0000000..2846277
--- /dev/null
+++ b/tests/inet_socket/stop_remote_svr
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+kill $1 >/dev/null 2>&1
diff --git a/tests/inet_socket/test b/tests/inet_socket/test
index 47ce106..75e7baf 100755
--- a/tests/inet_socket/test
+++ b/tests/inet_socket/test
@@ -30,8 +30,43 @@ BEGIN {
plan tests => $test_count;
}
+# Note the ncat address must NOT be used for tests as
+# CIPSO/CALIPSO/IPSEC will cause protocol errors.
+$s_basedir = "tests/inet_socket";
+$ncat_host = $ENV{'NCAT_HOST'};
+$ncat_port = $ENV{'NCAT_PORT'};
+if ( defined $ncat_host and defined $ncat_port ) {
+ print "Running remote servers on IP addr: $ncat_host\n";
+
+ # Get ipv4/6 addrs
+ $c_ipv4_1 = $ENV{'C_IPV4_1'};
+ $c_ipv6_1 = $ENV{'C_IPV6_1'};
+ $c_ifname = $ENV{'C_IFNAME'};
+ $s_ipv4_1 = $ENV{'S_IPV4_1'};
+ $s_ipv6_1 = $ENV{'S_IPV6_1'};
+
+ # IPv6 tests require ifname for local link address
+ if ( defined $c_ifname ) {
+ $s_ipv6_ifn_1 = "$s_ipv6_1\%$c_ifname";
+ }
+ else {
+ $s_ipv6_ifn_1 = $s_ipv6_1;
+ }
+
+ $r = "-r"; # Print server response
+ $ncat = "ncat $ncat_host $ncat_port 2>&1";
+}
+else {
+ $c_ipv4_1 = "127.0.0.1";
+ $c_ipv6_1 = "::1";
+ $s_ipv4_1 = "127.0.0.1";
+ $s_ipv6_1 = "::1";
+ $s_ipv6_ifn_1 = "::1";
+ $r = " ";
+}
+
sub server_start {
- my ( $runcon_args, $args ) = @_;
+ my ( $runcon_args, $args, $text ) = @_;
my $pid;
system("mkfifo $basedir/flag");
@@ -42,6 +77,7 @@ sub server_start {
# Wait for it to initialize.
system("read -t 5 <>$basedir/flag");
+ print "Started $text server\n";
return $pid;
}
@@ -53,36 +89,70 @@ sub server_end {
system("rm -f $basedir/flag");
}
-# Load NetLabel configuration for full CIPSO/IPv4 labeling over loopback.
-system "/bin/sh $basedir/cipso-fl-load";
+sub remote_server_start {
+ my ( $runcon_args, $args, $text ) = @_;
+ my $pid;
+
+ # Start remote server and retrieve process ID to check if ready
+
+`echo "/bin/sh $s_basedir/start_remote_svr 'runcon $runcon_args $s_basedir/server $args'" | $ncat`;
+
+ $pid = $pid = `(echo 'pidof $s_basedir/server'; read -t 2) | $ncat`;
+ chomp($pid);
+ if ( not $pid ) {
+ print "Could not obtain remote server PID\n";
+ }
+ else {
+ print "Started $text server - PID: $pid\n";
+ }
+
+ return $pid;
+}
+
+sub remote_server_end {
+ my ($pid) = @_;
+
+ `echo "/bin/sh $s_basedir/stop_remote_svr $pid" | $ncat`;
+}
+
+# Load NetLabel configuration for full CIPSO/IPv4 labeling.
+system "/bin/sh $basedir/cipso-fl-load $c_ipv4_1";
# Start the stream server.
-$pid = server_start( "-t test_inet_server_t", "stream 65535" );
+$pid = server_start(
+ "-t test_inet_server_t",
+ "stream 65535",
+ "local full CIPSO labeling - stream"
+);
# Verify that authorized client can communicate with the server.
$result =
- system "runcon -t test_inet_client_t $basedir/client stream 127.0.0.1 65535";
+ system "runcon -t test_inet_client_t $basedir/client stream $c_ipv4_1 65535";
ok( $result eq 0 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client stream $c_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Kill the server.
server_end($pid);
# Start the dgram server.
-$pid = server_start( "-t test_inet_server_t", "dgram 65535" );
+$pid = server_start(
+ "-t test_inet_server_t",
+ "dgram 65535",
+ "local full CIPSO labeling - dgram"
+);
# Verify that authorized client can communicate with the server.
$result =
- system "runcon -t test_inet_client_t $basedir/client dgram 127.0.0.1 65535";
+ system "runcon -t test_inet_client_t $basedir/client dgram $c_ipv4_1 65535";
ok( $result eq 0 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client dgram $c_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 9 );
# Kill the server.
@@ -91,95 +161,168 @@ server_end($pid);
# Flush NetLabel configuration.
system "/bin/sh $basedir/cipso-fl-flush";
-# Load NetLabel configuration for CIPSO/IPv4 using TAG 1 over loopback.
-system "/bin/sh $basedir/cipso-load-t1";
-
-# Start the stream server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c20.c250", "stream 65535" );
+# Load NetLabel configuration for CIPSO/IPv4 using TAG 1
+$tag = "1";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
+
+if ( defined $ncat_host ) { # Set remote cipso config + start server
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c20.c250",
+ "stream 65535",
+ "remote TAG 1 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c20.c250",
+ "stream 65535",
+ "local TAG 1 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server using level within T1 range.
$result = system
-"runcon -t test_inet_client_t -l s0:c61.c239 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c61.c239 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c61.c239 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c61.c239 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using different level.
$result = system
-"runcon -t test_inet_client_t -l s0:c19,c120 $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c19,c120 $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# TAG 1 allows categories 0 to 239 to be sent, if greater then ENOSPC (No space left on device)
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c240 $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c0.c240 $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
-# Kill the server.
-server_end($pid);
+# kill server.
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the dgram server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c20.c50", "dgram 65535" );
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c20.c50",
+ "dgram 65535",
+ "remote TAG 1 CIPSO - dgram"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c20.c50",
+ "dgram 65535",
+ "local TAG 1 CIPSO - dgram"
+ );
+}
# Verify that authorized client can communicate with the server using same levels.
$result = system
-"runcon -t test_inet_client_t -l s0:c20.c50 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c20.c50 dgram 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c20.c50 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c20.c50 dgram $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using levels dominating the server.
$result = system
-"runcon -t test_inet_client_t -l s0:c40.c51 $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c40.c51 $basedir/client $r dgram $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 9 );
-# Kill the server.
-server_end($pid);
-
-# Flush NetLabel configuration.
+# Kill server and flush NetLabel configuration.
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
-# Load NetLabel configuration for CIPSO/IPv4 using TAG 2 over loopback.
-system "/bin/sh $basedir/cipso-load-t2";
+# Load NetLabel configuration for CIPSO/IPv4 using TAG 2.
+$tag = "2";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
# Start the stream server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c0.c100", "stream 65535" );
+if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "stream 65535",
+ "remote TAG 2 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "stream 65535",
+ "local TAG 2 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server using level.
$result = system
-"runcon -t test_inet_client_t -l s0:c90.c100 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c90.c100 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c90.c100 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c90.c100 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using level.
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c14 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c14 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c14 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c14 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using different level.
$result = system
-"runcon -t test_inet_client_t -l s0:c101 $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c101 $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# TAG 2 allows a maximum of 15 categories in exchange, if greater then ENOSPC (No space left on device)
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c16 -- $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c0.c16 -- $basedir/client $r dgram $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Kill the server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the dgram server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c0.c14", "dgram 65535" );
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c0.c14",
+ "dgram 65535",
+ "remote TAG 2 CIPSO - dgram"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c0.c14",
+ "dgram 65535",
+ "local TAG 2 CIPSO - dgram"
+ );
+}
# Verify that authorized client can communicate with the server using same levels.
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c14 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c14 dgram 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c14 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c14 dgram $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using levels dominating the server.
$result = system
-"runcon -t test_inet_client_t -l s0:c15 $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c15 $basedir/client $r dgram $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 9 );
-# Kill the server.
-server_end($pid);
-
-# Flush NetLabel configuration.
+# Kill server and flush NetLabel configuration.
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
# Load NetLabel configuration for CIPSO/IPv4 using TAG 5 over loopback.
@@ -189,56 +332,93 @@ system "/bin/sh $basedir/cipso-flush";
# * of category ranges is 7, but if the low end of the last category range is
# * zero then it is possible to fit 8 category ranges because the zero should
# * be omitted. */
-system "/bin/sh $basedir/cipso-load-t5";
+$tag = "5";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
# Start the stream server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c0.c100", "stream 65535" );
+if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "stream 65535",
+ "remote TAG 5 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "stream 65535",
+ "local TAG 5 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server using level.
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c100 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c100 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c100 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c100 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using level.
$result = system
-"runcon -t test_inet_client_t -l s0:c8.c100 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c8.c100 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c8.c100 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c8.c100 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using different level.
$result = system
-"runcon -t test_inet_client_t -l s0:c8.c101 $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c8.c101 $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Verify ok with the 8 entries when cat c0:
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c3,c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c3,c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88 stream 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c3,c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c3,c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88 stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify fail with the 8 entries when cat !c0:
$result = system
-"runcon -t test_inet_client_t -l s0:c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88,c90.c99 $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c20.c25,c30.c36,c40.c45,c50.c55,c60.c66,c70.c78,c80.c88,c90.c99 $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Kill the server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the dgram server with a defined level.
-$pid = server_start( "-t test_inet_server_t -l s0:c0.c100", "dgram 65535" );
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "dgram 65535",
+ "remote TAG 5 CIPSO - dgram"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c0.c100",
+ "dgram 65535",
+ "local TAG 5 CIPSO - dgram"
+ );
+}
# Verify that authorized client can communicate with the server using same levels.
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c100 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c100 dgram 127.0.0.1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c100 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c100 dgram $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using levels dominating the server.
$result = system
-"runcon -t test_inet_client_t -l s0:c40.c101 $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c40.c101 $basedir/client $r dgram $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 9 );
-# Kill the server.
-server_end($pid);
-
-# Flush NetLabel configuration.
+# Kill server and flush NetLabel configuration.
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
# Verify that authorized domain can bind UDP sockets.
@@ -282,77 +462,146 @@ ok($result);
if ($test_ipsec) {
# Load IPSEC configuration.
- system "/bin/sh $basedir/ipsec-load";
+ $user = `secon -u --pid $$`;
+ chomp($user);
+ $role = `secon -r --pid $$`;
+ chomp($role);
+ $level = `secon -m --pid $$`;
+ chomp($level);
+ $goodclientcon = "$user:$role:test_inet_client_t:$level";
+ $badclientcon = "$user:$role:test_inet_bad_client_t:$level";
+
+ system
+"/bin/sh $basedir/ipsec-load $goodclientcon $badclientcon $c_ipv4_1 $s_ipv4_1 $c_ipv6_1 $s_ipv6_1";
# Start the stream server.
- $pid = server_start( "-t test_inet_server_t", "stream 65535" );
+ if ( defined $ncat_host ) {
+`echo "/bin/sh $s_basedir/ipsec-load $goodclientcon $badclientcon $c_ipv4_1 $s_ipv4_1 $c_ipv6_1 $s_ipv6_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_inet_server_t",
+ "stream 65535",
+ "remote IPSEC - stream"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_inet_server_t",
+ "stream 65535",
+ "local IPSEC - stream"
+ );
+ }
# Verify that authorized client can communicate with the server.
$result =
system
- "runcon -t test_inet_client_t $basedir/client stream 127.0.0.1 65535";
+ "runcon -t test_inet_client_t $basedir/client $r stream $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client stream 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client $r stream $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Verify that authorized client can communicate with the server.
$result =
- system "runcon -t test_inet_client_t $basedir/client stream ::1 65535";
+ system
+"runcon -t test_inet_client_t $basedir/client $r stream $s_ipv6_ifn_1 65535";
ok( $result eq 0 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client stream ::1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client $r stream $s_ipv6_ifn_1 65535 2>&1";
ok( $result >> 8 eq 5 );
# Kill the server.
- server_end($pid);
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ }
+ else {
+ server_end($pid);
+ }
# Start the dgram server.
- $pid = server_start( "-t test_inet_server_t", "dgram 65535" );
+ if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_inet_server_t",
+ "dgram 65535",
+ "remote IPSEC - dgram"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_inet_server_t",
+ "dgram 65535",
+ "local IPSEC - dgram"
+ );
+ }
# Verify that authorized client can communicate with the server.
$result =
system
- "runcon -t test_inet_client_t $basedir/client dgram 127.0.0.1 65535";
+ "runcon -t test_inet_client_t $basedir/client $r dgram $s_ipv4_1 65535";
ok( $result eq 0 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client dgram 127.0.0.1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client $r dgram $s_ipv4_1 65535 2>&1";
ok( $result >> 8 eq 8 );
# Verify that unauthorized client cannot communicate with the server.
$result = system
-"runcon -t test_inet_bad_client_t -- $basedir/client dgram ::1 65535 2>&1";
+"runcon -t test_inet_bad_client_t -- $basedir/client $r dgram $s_ipv6_ifn_1 65535 2>&1";
ok( $result >> 8 eq 8 );
# Kill the server.
- server_end($pid);
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ }
+ else {
+ server_end($pid);
+ }
# Start the dgram server for IPSEC test using IPv6 but do not request peer context.
- $pid = server_start( "-t test_inet_server_t", "-n dgram 65535" );
+ if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_inet_server_t",
+ "-n dgram 65535",
+ "remote IPSEC - dgram"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_inet_server_t",
+ "-n dgram 65535",
+ "local IPSEC - dgram"
+ );
+ }
# This test now passes.
$result = system
- "runcon -t test_inet_client_t $basedir/client -e nopeer dgram ::1 65535";
+"runcon -t test_inet_client_t $basedir/client $r -e nopeer dgram $s_ipv6_ifn_1 65535";
ok( $result eq 0 );
- # Kill the server.
- server_end($pid);
-
- # Flush IPSEC configuration.
+ # Kill server and flush IPSEC configuration.
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/ipsec-flush" | $ncat`;
+ }
+ else {
+ server_end($pid);
+ }
system "/bin/sh $basedir/ipsec-flush";
}
-# Load iptables (IPv4 & IPv6) configuration.
+# Load iptables (IPv4 & IPv6) configuration. Test local only
system "/bin/sh $basedir/iptables-load";
# Start the stream server.
-$pid = server_start( "-t test_inet_server_t", "-n stream 65535" );
+$pid = server_start(
+ "-t test_inet_server_t",
+ "-n stream 65535",
+ "local iptables - stream"
+);
# Verify that authorized client can communicate with the server.
$result = system
@@ -378,7 +627,11 @@ ok( $result >> 8 eq 5 );
server_end($pid);
# Start the dgram server.
-$pid = server_start( "-t test_inet_server_t", "-n dgram 65535" );
+$pid = server_start(
+ "-t test_inet_server_t",
+ "-n dgram 65535",
+ "local iptables dgram"
+);
# Verify that authorized client can communicate with the server.
$result = system
@@ -408,30 +661,49 @@ system "/bin/sh $basedir/iptables-flush";
if ($test_calipso_stream) {
- # Load NetLabel configuration for CALIPSO/IPv6 labeling over loopback.
- system "/bin/sh $basedir/calipso-load";
+ # Load NetLabel configuration for CALIPSO/IPv6 labeling.
+ system "/bin/sh $basedir/calipso-load $s_ipv6_1";
# Start the stream server.
- $pid = server_start( "-t test_inet_server_t -l s0:c0.c10", "stream 65535" );
+ if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/calipso-load $c_ipv6_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_inet_server_t -l s0:c0.c10",
+ "stream 65535",
+ "remote CALIPSO - stream"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_inet_server_t -l s0:c0.c10",
+ "stream 65535",
+ "local CALIPSO - stream"
+ );
+ }
# Verify that authorized client can communicate with the server.
$result = system
-"runcon -t test_inet_client_t -l s0:c0.c10 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c0.c10 stream ::1 65535";
+"runcon -t test_inet_client_t -l s0:c0.c10 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c0.c10 stream $s_ipv6_ifn_1 65535";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level.
$result = system
-"runcon -t test_inet_client_t -l s0:c8.c10 $basedir/client -e system_u:object_r:netlabel_peer_t:s0:c8.c10 stream ::1 65535";
+"runcon -t test_inet_client_t -l s0:c8.c10 $basedir/client $r -e system_u:object_r:netlabel_peer_t:s0:c8.c10 stream $s_ipv6_ifn_1 65535";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using invalid level.
$result = system
-"runcon -t test_inet_client_t -l s0:c8.c12 -- $basedir/client stream ::1 65535 2>&1";
+"runcon -t test_inet_client_t -l s0:c8.c12 -- $basedir/client $r stream $s_ipv6_ifn_1 65535 2>&1";
ok( $result >> 8 eq 5 );
- # Kill the stream server.
- server_end($pid);
-
+ # Kill server and flush netlabels.
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/calipso-flush" | $ncat`;
+ }
+ else {
+ server_end($pid);
+ }
system "/bin/sh $basedir/calipso-flush";
}
diff --git a/tests/sctp/calipso-load b/tests/sctp/calipso-load
index 4bb9c7f..fd29640 100644
--- a/tests/sctp/calipso-load
+++ b/tests/sctp/calipso-load
@@ -4,4 +4,4 @@ netlabelctl calipso add pass doi:16
netlabelctl map del default
netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:::1 protocol:calipso,16
+netlabelctl map add default address:$1 protocol:calipso,16
diff --git a/tests/sctp/cipso-load-t2 b/tests/sctp/cipso-load
similarity index 58%
rename from tests/sctp/cipso-load-t2
rename to tests/sctp/cipso-load
index 3227ba5..9c43519 100644
--- a/tests/sctp/cipso-load-t2
+++ b/tests/sctp/cipso-load
@@ -1,7 +1,7 @@
#!/bin/sh
-netlabelctl cipsov4 add pass doi:16 tags:2
+netlabelctl cipsov4 add pass doi:16 tags:$1
netlabelctl map del default
netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
+netlabelctl map add default address:$2 protocol:cipsov4,16
diff --git a/tests/sctp/cipso-load-t1 b/tests/sctp/cipso-load-t1
deleted file mode 100644
index 6e9a161..0000000
--- a/tests/sctp/cipso-load-t1
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-netlabelctl cipsov4 add pass doi:16 tags:1
-netlabelctl map del default
-netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
-netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/sctp/cipso-load-t5 b/tests/sctp/cipso-load-t5
deleted file mode 100644
index 661afb8..0000000
--- a/tests/sctp/cipso-load-t5
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-netlabelctl cipsov4 add pass doi:16 tags:5
-netlabelctl map del default
-netlabelctl map add default address:0.0.0.0/0 protocol:unlbl
-netlabelctl map add default address:::/0 protocol:unlbl
-netlabelctl map add default address:127.0.0.1 protocol:cipsov4,16
diff --git a/tests/sctp/sctp_asconf_params_client.c b/tests/sctp/sctp_asconf_params_client.c
index 12522f3..5e01b0e 100644
--- a/tests/sctp/sctp_asconf_params_client.c
+++ b/tests/sctp/sctp_asconf_params_client.c
@@ -135,11 +135,6 @@ int main(int argc, char **argv)
exit(1);
}
-
- /* printf("Client scopeID: %d\n",
- * ((struct sockaddr_in6 *)client_res->ai_addr)->sin6_scope_id);
- */
-
client_sock = socket(client_res->ai_family, client_res->ai_socktype,
client_res->ai_protocol);
if (client_sock < 0) {
@@ -211,6 +206,11 @@ int main(int argc, char **argv)
exit(1);
}
+ /*
+ * Sleep a sec to ensure client gets info.
+ * FIXME - rewrite all this one day to fix remote timing problems
+ */
+ sleep(1);
/* Now get the new primary address from the client */
signal(SIGALRM, getprimaddr_alarm);
alarm(2);
diff --git a/tests/sctp/sctp_asconf_params_server.c b/tests/sctp/sctp_asconf_params_server.c
index ff7473b..9cf460f 100644
--- a/tests/sctp/sctp_asconf_params_server.c
+++ b/tests/sctp/sctp_asconf_params_server.c
@@ -200,7 +200,7 @@ int main(int argc, char **argv)
result = 1;
goto err1;
}
- /* Sleep a sec to ensure client get info. */
+
result = read(new_sock, &buffer, sizeof(buffer));
if (result < 0) {
perror("read");
diff --git a/tests/sctp/start_remote_svr b/tests/sctp/start_remote_svr
new file mode 100644
index 0000000..57d2774
--- /dev/null
+++ b/tests/sctp/start_remote_svr
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+$1 & disown
diff --git a/tests/sctp/stop_remote_svr b/tests/sctp/stop_remote_svr
new file mode 100644
index 0000000..2846277
--- /dev/null
+++ b/tests/sctp/stop_remote_svr
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+kill $1 >/dev/null 2>&1
diff --git a/tests/sctp/test b/tests/sctp/test
index 6631da4..9d82157 100755
--- a/tests/sctp/test
+++ b/tests/sctp/test
@@ -60,8 +60,45 @@ BEGIN {
}
}
+$s_basedir = "tests/sctp";
+$ncat_host = $ENV{'NCAT_HOST'};
+$ncat_port = $ENV{'NCAT_PORT'};
+if ( defined $ncat_host and defined $ncat_port ) {
+ print "Running remote servers on IP addr: $ncat_host\n";
+
+ # Get ipv4/6 addrs
+ $c_ipv4_1 = $ENV{'C_IPV4_1'};
+ $c_ipv6_1 = $ENV{'C_IPV6_1'};
+ $c_ifname = $ENV{'C_IFNAME'};
+ $s_ipv4_1 = $ENV{'S_IPV4_1'};
+ $s_ipv6_1 = $ENV{'S_IPV6_1'};
+ $s_ipv6_2 = $ENV{'S_IPV6_2'};
+
+ # IPv6 tests require ifname for local link address
+ if ( defined $c_ifname ) {
+ $s_ipv6_ifn_1 = "$s_ipv6_1\%$c_ifname";
+ }
+ else {
+ $s_ipv6_ifn_1 = $s_ipv6_1;
+ }
+
+ $test_asconf_remote = 0;
+ if ( defined $s_ipv6_2 and $test_asconf ) {
+ $test_asconf_remote = 1;
+ }
+
+ $ncat = "ncat $ncat_host $ncat_port 2>&1";
+}
+else {
+ $c_ipv4_1 = "127.0.0.1";
+ $c_ipv6_1 = "::1";
+ $s_ipv4_1 = "127.0.0.1";
+ $s_ipv6_1 = "::1";
+ $s_ipv6_ifn_1 = "::1";
+}
+
sub server_start {
- my ( $runcon_args, $prog, $args ) = @_;
+ my ( $runcon_args, $prog, $args, $text ) = @_;
my $pid;
system("mkfifo $basedir/flag");
@@ -72,6 +109,7 @@ sub server_start {
# Wait for it to initialize.
system("read -t 5 <>$basedir/flag");
+ print "Started $text server\n";
return $pid;
}
@@ -83,6 +121,32 @@ sub server_end {
system("rm -f $basedir/flag");
}
+sub remote_server_start {
+ my ( $runcon_args, $prog, $args, $text ) = @_;
+ my $pid;
+
+ # Start remote server and retrieve process ID to check if ready
+
+`echo "/bin/sh $s_basedir/start_remote_svr 'runcon $runcon_args $s_basedir/$prog $args'" | $ncat`;
+
+ $pid = `(echo 'pidof $prog'; read -t 2) | $ncat`;
+ chomp($pid);
+ if ( not $pid ) {
+ print "Could not obtain remote server PID\n";
+ }
+ else {
+ print "Started $text server - PID: $pid\n";
+ }
+
+ return $pid;
+}
+
+sub remote_server_end {
+ my ($pid) = @_;
+
+ `echo "/bin/sh $s_basedir/stop_remote_svr $pid" | $ncat`;
+}
+
#
# NOTE: direction flow is given as Client->Server (STREAM->SEQ)
#
@@ -93,38 +157,57 @@ sub server_end {
print "# Testing base configuration.\n";
# Start the stream server.
-$pid =
- server_start( "-t test_sctp_server_t", "sctp_server", "$v -n stream 1035" );
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "-n stream 1035",
+ "remote - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v -n stream 1035",
+ "local - stream"
+ );
+}
# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
$result = system
-"runcon -t test_sctp_client_t $basedir/sctp_client $v -e nopeer stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t $basedir/sctp_client $v -e nopeer stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
$result = system
-"runcon -t test_sctp_client_t $basedir/sctp_client $v -x -e nopeer stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t $basedir/sctp_client $v -x -e nopeer stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server SEQ->STREAM with no client connect(2).
$result = system
-"runcon -t test_sctp_client_t $basedir/sctp_client $v -n -e nopeer seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t $basedir/sctp_client $v -n -e nopeer seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server SEQ->STREAM.
$result = system
- "runcon -t test_sctp_client_t $basedir/sctp_client $v -e nopeer seq ::1 1035";
+"runcon -t test_sctp_client_t $basedir/sctp_client $v -e nopeer seq $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
######## This test requires setting a portcon statement in policy ###########
# Verify that the client cannot communicate with server when using port not allowed STREAM->STREAM.
# Note that the sctp_test policy only allows ports 1024-65535
$result = system
-"runcon -t test_sctp_client_t -- $basedir/sctp_client $v -e nopeer stream ::1 1023 2>&1";
+"runcon -t test_sctp_client_t -- $basedir/sctp_client $v -e nopeer stream $s_ipv6_ifn_1 1023 2>&1";
ok( $result >> 8 eq 8 );
# Kill the stream server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
######## This test requires setting a portcon statement in policy ###########
# Verify that the server cannot start when using port not allowed STREAM->STREAM.
@@ -164,13 +247,17 @@ ok( $result eq 0 );
######################### SET_PRI_ADDR SET_PEER_ADDR ########################
#
-# These tests require two local non-loopback addresses.
+# These tests require two addresses.
if ($test_asconf) {
print "# Testing asconf parameter chunk processing.\n";
# To enable processing of incoming ASCONF parameters:
# SCTP_PARAM_SET_PRIMARY, SCTP_PARAM_ADD_IP and SCTP_PARAM_DEL_IP,
# need to set:
+ if ( defined $ncat_host and $test_asconf_remote ) {
+ `echo "echo 1 > /proc/sys/net/sctp/addip_enable" | $ncat`;
+ `echo "echo 1 > /proc/sys/net/sctp/addip_noauth_enable" | $ncat`;
+ }
system("echo 1 > /proc/sys/net/sctp/addip_enable");
system("echo 1 > /proc/sys/net/sctp/addip_noauth_enable");
@@ -179,21 +266,46 @@ if ($test_asconf) {
"runcon -t test_sctp_set_peer_addr_t $basedir/sctp_set_peer_addr $v $ipaddress[0] $ipaddress[1] 1035";
ok( $result eq 0 );
- # Start the asconf server.
- $pid = server_start(
- "-t test_sctp_set_peer_addr_t",
- "sctp_asconf_params_server",
- "$v $ipaddress[0] $ipaddress[1] 1035"
- );
+ if ( defined $ncat_host and $test_asconf_remote ) {
+ $pid = remote_server_start(
+ "-t test_sctp_set_peer_addr_t",
+ "sctp_asconf_params_server",
+ "$s_ipv6_ifn_1 $s_ipv6_2 1035",
+ "remote asconf params - stream"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_sctp_set_peer_addr_t",
+ "sctp_asconf_params_server",
+ "$v $ipaddress[0] $ipaddress[1] 1035",
+ "local asconf params - stream"
+ );
+ }
-# This should fail connect permission attempting to send SCTP_PARAM_ADD_IP to client.
- $result = system
+ print "Starting: asconf client\n";
+ if ( defined $ncat_host and $test_asconf_remote ) {
+ $result = system
+"runcon -t test_sctp_client_t -- $basedir/sctp_asconf_params_client $v $s_ipv6_ifn_1 1035 2>&1";
+ }
+ else {
+ $result = system
"runcon -t test_sctp_client_t -- $basedir/sctp_asconf_params_client $v $ipaddress[0] 1035 2>&1";
- ok($result);
+ }
+ ok( $result eq 0 );
# The server should automatically exit.
- server_end($pid);
+ if ( defined $ncat_host and $test_asconf_remote ) {
+ remote_server_end($pid);
+ }
+ else {
+ server_end($pid);
+ }
+ if ( defined $ncat_host and $test_asconf_remote ) {
+ `echo "echo 0 > /proc/sys/net/sctp/addip_enable" | $ncat`;
+ `echo "echo 0 > /proc/sys/net/sctp/addip_noauth_enable" | $ncat`;
+ }
system("echo 0 > /proc/sys/net/sctp/addip_enable");
system("echo 0 > /proc/sys/net/sctp/addip_noauth_enable");
}
@@ -209,7 +321,12 @@ print "# Testing NetLabel fallback peer labeling.\n";
system "/bin/sh $basedir/fb-label-load";
# Start stream server.
-$pid = server_start( "-t test_sctp_server_t", "sctp_server", "$v stream 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v stream 1035",
+ "local fallback peer labeling - stream"
+);
# Verify that authorized client can communicate with the server STREAM->STREAM.
$result = system
@@ -230,7 +347,12 @@ ok( $result >> 8 eq 6 );
server_end($pid);
# Start seq server.
-$pid = server_start( "-t test_sctp_server_t", "sctp_server", "$v seq 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v seq 1035",
+ "local fallback peer labeling - seq"
+);
# Verify that authorized client can communicate with the server SEQ->SEQ.
$result = system
@@ -268,7 +390,12 @@ system "/bin/sh $basedir/fb-label-flush";
print "# Testing deny association.\n";
system "/bin/sh $basedir/fb-deny-label-load";
-$pid = server_start( "-t test_sctp_server_t", "sctp_server", "$v stream 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v stream 1035",
+ "local fallback peer labeling - stream"
+);
# Verify that authorized client can communicate with the server STREAM->STREAM.
# This sets the servers initial peer context to netlabel_sctp_peer_t:s0
@@ -290,323 +417,480 @@ system "/bin/sh $basedir/fb-deny-label-flush";
############################## CIPSO/IPv4 TAG 1 ###############################
#
print "# Testing CIPSO/IPv4 - TAG 1 using socket ip_option data\n";
-system "/bin/sh $basedir/cipso-load-t1";
+$tag = "1";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
# Start the stream server for IPv4 only.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c182.c192",
- "sctp_server",
- "$v -4 -i stream 1035"
-);
+if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c182.c192",
+ "sctp_server",
+ "-4 -i stream 1035",
+ "remote TAG 1 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c182.c192",
+ "sctp_server",
+ "$v -4 -i stream 1035",
+ "local TAG 1 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
$result = system
-"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
$result = system
-"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c182.c192 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c182,c187,c190 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c182,c187,c190 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
$result = system
-"runcon -t test_sctp_client_t -l s0:c189,c192 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c189,c192 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c182.c193 -- $basedir/sctp_client $v stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c182.c193 -- $basedir/sctp_client $v stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill the stream server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the seq server.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c20.c300",
- "sctp_server",
- "$v -4 -i seq 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c20.c300",
+ "sctp_server",
+ "-4 -i seq 1035",
+ "remote TAG 1 CIPSO - seq"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c20.c300",
+ "sctp_server",
+ "$v -4 -i seq 1035",
+ "local TAG 1 CIPSO - seq"
+ );
+}
# Verify that authorized client can communicate with the server. SEQ->SEQ
$result = system
-"runcon -t test_sctp_client_t -l s0:c27.c28 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c27.c28 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c30 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c30 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c24,c26,c27.c29 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c24,c26,c27.c29 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c19.c100 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c19.c100 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# TAG 1 allows categories 0 to 239 to be sent, if greater then ENOSPC (No space left on device)
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c300 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c20.c300 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 7 );
# Kill server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
print "# Testing CIPSO/IPv4 - TAG 1 PEELOFF using socket ip_option data\n";
# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c0.c10",
- "sctp_peeloff_server",
- "$v -4 -i 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "-4 -i 1035",
+ "remote TAG 1 CIPSO - peeloff"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "$v -4 -i 1035",
+ "local TAG 1 CIPSO - peeloff"
+ );
+}
# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
-# Kill the seq server.
+# Kill the peeloff server.
server_end($pid);
-
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
#
############################## CIPSO/IPv4 TAG 2 ###############################
#
print "# Testing CIPSO/IPv4 - TAG 2 using socket ip_option data\n";
-system "/bin/sh $basedir/cipso-load-t2";
+$tag = "2";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
# Start the stream server for IPv4 only.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
- "sctp_server", "$v -4 -i stream 1035" );
+if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
+ "sctp_server",
+ "-4 -i stream 1035",
+ "remote TAG 2 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
+ "sctp_server",
+ "$v -4 -i stream 1035",
+ "local TAG 2 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
$result = system
-"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
$result = system
-"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
$result = system
-"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client $v stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client $v stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
-# Kill the stream server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the seq server.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c20.c335",
- "sctp_server",
- "$v -4 -i seq 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c20.c335",
+ "sctp_server",
+ "-4 -i seq 1035",
+ "remote TAG 2 CIPSO - seq"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c20.c335",
+ "sctp_server",
+ "$v -4 -i seq 1035",
+ "local TAG 2 CIPSO - seq"
+ );
+}
# Verify that authorized client can communicate with the server. SEQ->SEQ
$result = system
-"runcon -t test_sctp_client_t -l s0:c328.c333 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c328.c333 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c34 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c34 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c335 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c335 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c19.c30 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c19.c30 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# TAG 2 allows a maximum of 15 categories in exchange, if greater then ENOSPC (No space left on device)
$result = system
-"runcon -t test_sctp_client_t -l s0:c200.c216 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c200.c216 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 7 );
# Kill server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
print "# Testing CIPSO/IPv4 - TAG 2 PEELOFF using socket ip_option data\n";
# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c0.c10",
- "sctp_peeloff_server",
- "$v -4 -i 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "-4 -i 1035",
+ "remote TAG 2 CIPSO - peeloff"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "$v -4 -i 1035",
+ "local TAG 2 CIPSO - peeloff"
+ );
+}
# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill the seq server.
-server_end($pid);
-
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
#
############################## CIPSO/IPv4 TAG 5 ###############################
#
print "# Testing CIPSO/IPv4 - TAG 5 using socket ip_option data\n";
-system "/bin/sh $basedir/cipso-load-t5";
+$tag = "5";
+system "/bin/sh $basedir/cipso-load $tag $s_ipv4_1";
# Start the stream server for IPv4 only.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
- "sctp_server", "$v -4 -i stream 1035" );
+if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/cipso-load $tag $c_ipv4_1" | $ncat`;
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
+ "sctp_server",
+ "-4 -i stream 1035",
+ "remote TAG 5 CIPSO - stream"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c782,c714,c769,c788,c803,c842,c864",
+ "sctp_server",
+ "$v -4 -i stream 1035",
+ "local TAG 5 CIPSO - stream"
+ );
+}
# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
$result = system
-"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
$result = system
-"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c782,c714,c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803,c842,c864 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
$result = system
-"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c769,c788,c803 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client $v stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c1023 -- $basedir/sctp_client $v stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill the stream server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
# Start the seq server.
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c20.c50",
- "sctp_server",
- "$v -4 -i seq 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c20.c50",
+ "sctp_server",
+ "-4 -i seq 1035",
+ "remote TAG 5 CIPSO - seq"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c20.c50",
+ "sctp_server",
+ "$v -4 -i seq 1035",
+ "local TAG 5 CIPSO - seq"
+ );
+}
# Verify that authorized client can communicate with the server. SEQ->SEQ
$result = system
-"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client $v -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client $v -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c51 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c20.c51 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
-# TAG 2 allows a maximum of 7 ranges in exchange, if greater then ENOSPC (No space left on device)
+# TAG 5 allows a maximum of 7 ranges in exchange, if greater then ENOSPC (No space left on device)
$result = system
-"runcon -t test_sctp_client_t -l s0:c20,c22,c24,c30.c33,c38,c42.c45,c48,c50 -- $basedir/sctp_client $v -i seq 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c20,c22,c24,c30.c33,c38,c42.c45,c48,c50 -- $basedir/sctp_client $v -i seq $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 7 );
# Kill server.
-server_end($pid);
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+}
+else {
+ server_end($pid);
+}
print "# Testing CIPSO/IPv4 - TAG 5 PEELOFF using socket ip_option data\n";
# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
-$pid = server_start(
- "-t test_sctp_server_t -l s0:c0.c10",
- "sctp_peeloff_server",
- "$v -4 -i 1035"
-);
+if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "-4 -i 1035",
+ "remote TAG 5 CIPSO - peeloff"
+ );
+}
+else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "$v -4 -i 1035",
+ "local TAG 5 CIPSO - peeloff"
+ );
+}
# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream 127.0.0.1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream 127.0.0.1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream $s_ipv4_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill the seq server.
-server_end($pid);
-
+if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/cipso-flush" | $ncat`;
+}
+else {
+ server_end($pid);
+}
system "/bin/sh $basedir/cipso-flush";
#
################## CIPSO/IPv4 Full Labeling over Loopback ####################
#
-
print "# Testing CIPSO/IPv4 full labeling over loopback.\n";
system "/bin/sh $basedir/cipso-fl-load";
# Start the stream server for IPv4 only.
-$pid =
- server_start( "-t test_sctp_server_t", "sctp_server", "$v -4 stream 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v -4 stream 1035",
+ "local full CIPSO labeling - stream"
+);
# Verify that authorized client can communicate with the server STREAM->STREAM.
$result = system
@@ -622,7 +906,12 @@ ok( $result >> 8 eq 6 );
server_end($pid);
# Start the seq server for IPv4 only.
-$pid = server_start( "-t test_sctp_server_t", "sctp_server", "$v -4 seq 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v -4 seq 1035",
+ "local full CIPSO labeling - seq"
+);
# Verify that authorized client can communicate with the server SEQ->STREAM.
$result =
@@ -646,117 +935,170 @@ system "/bin/sh $basedir/cipso-fl-flush";
if ($test_calipso) {
print "# Testing CALIPSO/IPv6 using socket ip_option data\n";
- system "/bin/sh $basedir/calipso-load";
+ system "/bin/sh $basedir/calipso-load $s_ipv6_1";
# Start the stream server.
- $pid = server_start(
-"-t test_sctp_server_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023",
- "sctp_server",
- "$v -i stream 1035"
- );
+ if ( defined $ncat_host ) {
+ `echo "/bin/sh $s_basedir/calipso-load $c_ipv6_1" | $ncat`;
+ $pid = remote_server_start(
+"-t test_sctp_server_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023",
+ "sctp_server",
+ "-i stream 1035",
+ "remote CALIPSO - stream"
+ );
+ }
+ else {
+ $pid = server_start(
+"-t test_sctp_server_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023",
+ "sctp_server",
+ "$v -i stream 1035",
+ "local CALIPSO - stream"
+ );
+ }
# Verify that authorized client can communicate with the server STREAM->STREAM with client using sctp_connectx(3).
$result = system
-"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client $v -x -i stream ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client $v -x -i stream $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server STREAM->STREAM with client using connect(2).
$result = system
-"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client $v -i stream ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c0,c12,c24,c36,c28,c610,c712,c414,c516,c318,c820,c622,c924,c726,c128,c330,c832,c534,c936,c138,c740,c42,c44,c246,c648,c950,c152,c354,c856,c158,c960,c662,c634,c686,c368,c570,c782,c714,c769,c788,c803,c842,c864,c986,c788,c290,c392,c594,c896,c698,c1023 $basedir/sctp_client $v -i stream $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client $v -i stream ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client $v -i stream $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using different valid level SEQ->STREAM
$result = system
-"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client $v -i seq ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c924,c726,c128,c330,c832,c534,c936,c138,c740,c42 $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client cannot communicate with the server using invalid level STREAM->STREAM.
$result = system
-"runcon -t test_sctp_client_t -l s0:c8.c12 -- $basedir/sctp_client $v -i stream ::1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c8.c12 -- $basedir/sctp_client $v -i stream $s_ipv6_ifn_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill the stream server.
- server_end($pid);
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ }
+ else {
+ server_end($pid);
+ }
# Start the seq server.
- $pid = server_start(
- "-t test_sctp_server_t -l s0:c20.c50",
- "sctp_server",
- "$v -i seq 1035"
- );
+ if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c20.c50",
+ "sctp_server",
+ "-i seq 1035",
+ "remote CALIPSO - seq"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c20.c50",
+ "sctp_server",
+ "$v -i seq 1035",
+ "local CALIPSO - seq"
+ );
+ }
# Verify that authorized client can communicate with the server. SEQ->SEQ
$result = system
-"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client $v -i seq ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c28.c48 $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client $v -i stream ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c50 $basedir/sctp_client $v -i stream $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using SEQ->SEQ with diff valid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client $v -i seq ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c20.c30,c31,c35,c40.c45 $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c20.c51 $basedir/sctp_client $v -i seq ::1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c20.c51 $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Verify that client cannot communicate with the server using SEQ->SEQ with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c19.c50 -- $basedir/sctp_client $v -i seq ::1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c19.c50 -- $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035 2>&1";
ok( $result >> 8 eq 6 );
# Kill server.
- server_end($pid);
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ }
+ else {
+ server_end($pid);
+ }
print "# Testing CALIPSO/IPv6 PEELOFF using socket ip_option data\n";
# Test sctp_peeloff(3) using 1 to Many SOCK_SEQPACKET
- $pid = server_start(
- "-t test_sctp_server_t -l s0:c0.c10",
- "sctp_peeloff_server",
- "$v -i 1035"
- );
+ if ( defined $ncat_host ) {
+ $pid = remote_server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "-i 1035",
+ "remote CALIPSO - peeloff"
+ );
+ }
+ else {
+ $pid = server_start(
+ "-t test_sctp_server_t -l s0:c0.c10",
+ "sctp_peeloff_server",
+ "$v -i 1035",
+ "local CALIPSO - peeloff"
+ );
+ }
# Verify that authorized client can communicate with the server using SEQ->SEQ->Peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -i seq $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that authorized client can communicate with the server using STREAM->SEQ->peeloff with same level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream ::1 1035";
+"runcon -t test_sctp_client_t -l s0:c0.c10 $basedir/sctp_client $v -x -i stream $s_ipv6_ifn_1 1035";
ok( $result eq 0 );
# Verify that client cannot communicate with the server using STREAM->SEQ->peeloff with invalid level.
$result = system
-"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream ::1 1035 2>&1";
+"runcon -t test_sctp_client_t -l s0:c0.c11 -- $basedir/sctp_client $v -x -i stream $s_ipv6_ifn_1 1035 2>&1";
ok( $result >> 8 eq 6 );
- # Kill the seq server.
- server_end($pid);
-
+ # Kill the peeloff server.
+ if ( defined $ncat_host ) {
+ remote_server_end($pid);
+ `echo "/bin/sh $s_basedir/calipso-flush" | $ncat`;
+ }
+ else {
+ server_end($pid);
+ }
system "/bin/sh $basedir/calipso-flush";
}
#
-##################### Test iptables configuration ############################
+############## Test iptables configuration (Local only) #####################
#
print "# Testing iptables (IPv4/IPv6).\n";
system "/bin/sh $basedir/iptables-load";
# Start the stream server.
-$pid =
- server_start( "-t test_sctp_server_t", "sctp_server", "$v -n stream 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v -n stream 1035",
+ "local iptables - stream"
+);
# Verify that authorized client can communicate with the server STREAM->STREAM.
$result = system
@@ -782,7 +1124,12 @@ ok( $result >> 8 eq 6 );
server_end($pid);
# Start the seq server.
-$pid = server_start( "-t test_sctp_server_t", "sctp_server", "$v -n seq 1035" );
+$pid = server_start(
+ "-t test_sctp_server_t",
+ "sctp_server",
+ "$v -n seq 1035",
+ "local iptables - seq"
+);
# Verify that authorized client can communicate with the server SEQ->SEQ.
$result = system
diff --git a/tools/remote.cfg b/tools/remote.cfg
new file mode 100644
index 0000000..7e57ae6
--- /dev/null
+++ b/tools/remote.cfg
@@ -0,0 +1,27 @@
+# Client -> Server address. Do not use the same ncat_host address for any
+# test server traffic as IPSEC, CIPSO & CALIPSO will cause protocol errors.
+ncat_host=193.168.1.65
+ncat_port=9999
+
+###########################################################################
+# NOTE: The c_ipv6_1 and s_ipv6_1 MUST be full IPv6 addresses. Using local
+# link addresses work for some tests, however IPSEC & CALIPSO fail for some
+# as yet unknown reason.
+###########################################################################
+
+# Client side MUST have one of each IPv4 and IPv6 addresses
+c_ipv4_1=192.168.1.198
+c_ipv6_1=2a00:23c6:278e:c901:3bf7:29c9:2139:91d0
+# The ifname is ONLY required for Client side if the Server side s_ipv6_1 is
+# an IPv6 local link address, as the client will use 's_ipv6_1%c_ifname' for
+# the server address (however see above note).
+c_ifname=
+
+# Server side MUST have one of each IPv4 and IPv6 addresses.
+# If testing SCTP for add/remove bindx addresses and inform the client
+# side via ASCONF chunks test, then an additional IPv6 address is required.
+# If it is a local link address, it MUST have the server side ifname
+# associated to it.
+s_ipv4_1=192.168.1.148
+s_ipv6_1=2a00:23c6:278e:c901:ff65:b87b:a84d:29a8
+s_ipv6_2=fe80::7f74:f41a:3c70:d333%enp9s0
diff --git a/tools/remote.sh b/tools/remote.sh
new file mode 100755
index 0000000..2849ced
--- /dev/null
+++ b/tools/remote.sh
@@ -0,0 +1,92 @@
+#!/bin/sh -e
+
+RUN=$1
+V=$2
+
+if [ "$(tests/kvercmp $(uname -r) 4.20.17)" -lt 0 ]; then
+ echo "Kernel must be 4.20.17 or greater to run SCTP tests"
+ exit 1
+fi
+
+STATUS=`getenforce`
+if [ "$STATUS" != "Enforcing" ]; then
+ echo "This script must be run in enforcing mode"
+ exit 1
+fi
+
+source ./tools/remote.cfg
+
+function err_exit() {
+ echo "Error on line: $1 - exiting"
+ exit 1
+}
+
+trap 'err_exit $LINENO' ERR
+
+function run_test() {
+ trap 'err_exit $LINENO' ERR
+ make -C tests/$1
+ cd tests/$1
+ if [ "$2" ]; then
+ ./test $2
+ else
+ ./test
+ fi
+ cd ../../
+ echo "Remote test for $1 complete"
+ exit 0
+}
+
+if [ "$RUN" == "-l" ]; then #### Remote server listen ####
+ export NCAT_PORT=$ncat_port
+ # Ensure policy and tests are ready
+ make -C policy load
+ make -C tests all
+
+ # The inet_socket IPSEC tests require this on the server side:
+ iptables -I INPUT 1 -p ah -j ACCEPT
+ # The sctp tests require these on the server side:
+ iptables -I INPUT 1 -p sctp -j ACCEPT
+ ip6tables -I INPUT 1 -p sctp -j ACCEPT
+
+ echo -e "\nncat listening on port $NCAT_PORT for test server commands\n"
+ # The remote ncat listener is run from selinux-testsuite. This allows
+ # tests to use relative paths to their specific location (e.g. tests/sctp)
+ # when executing commands on the remote system.
+ ncat -l -k -e /bin/sh -p $NCAT_PORT
+
+else #### Client server to run tests ####
+ #
+ # The sctp tests require these on client side for ASCONF tests:
+ iptables -I INPUT 1 -p sctp -j ACCEPT
+ ip6tables -I INPUT 1 -p sctp -j ACCEPT
+
+ export NCAT_HOST=$ncat_host
+ export NCAT_PORT=$ncat_port
+ export C_IPV4_1=$c_ipv4_1
+ export C_IPV6_1=$c_ipv6_1
+ if [ "$c_ifname" ]; then
+ export C_IFNAME=$c_ifname
+ fi
+
+ export S_IPV4_1=$s_ipv4_1
+ export S_IPV6_1=$s_ipv6_1
+ if [ "$s_ipv6_2" ]; then
+ export S_IPV6_2=$s_ipv6_2
+ fi
+
+ echo "Set ncat remote host IP: $NCAT_HOST port: $NCAT_PORT"
+ read -r -p "Is the remote system ready? [y/N]" ans
+ if [[ $ans == "N" || $ans == "n" ]]; then
+ echo "No tests run"
+ exit 1
+ fi
+
+ if [ "$RUN" ]; then
+ run_test $RUN $V
+ else
+ make -C policy load
+ make -C tests test
+ fi
+ echo "All local and remote tests completed"
+fi
--
2.25.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-04-20 13:21 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-20 13:21 [RFC PATCH] selinux-testsuite: Run tests using remote server Richard Haines
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).