* [PATCH] libsepol/cil: Allow validatetrans rules to be resolved
@ 2019-05-21 11:22 Richard Haines
2019-05-21 17:59 ` [Non-DoD Source] " jwcart2
0 siblings, 1 reply; 3+ messages in thread
From: Richard Haines @ 2019-05-21 11:22 UTC (permalink / raw)
To: selinux; +Cc: sds, Richard Haines
When validatetrans rule is in CIL policy it errors with:
u3, r3, and t3 can only be used with mlsvalidatetrans rules
Will now resolve these examples:
(validatetrans binder (and (and (eq t1 t1_t) (eq t2 t2_t)) (eq t3 t3_t)))
(mlsvalidatetrans file (and (and (eq t1 t1_t) (eq t2 t2_t))
(and (eq t3 t3_t) (domby h1 h2))))
Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
---
libsepol/cil/src/cil_verify.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/libsepol/cil/src/cil_verify.c b/libsepol/cil/src/cil_verify.c
index 1036d73..1a21cf4 100644
--- a/libsepol/cil/src/cil_verify.c
+++ b/libsepol/cil/src/cil_verify.c
@@ -221,8 +221,8 @@ int cil_verify_constraint_leaf_expr_syntax(enum cil_flavor l_flavor, enum cil_fl
cil_log(CIL_ERR, "l1, l2, h1, and h2 cannot be used on the left side with a string or list on the right side\n");
goto exit;
} else if (l_flavor == CIL_CONS_U3 || l_flavor == CIL_CONS_R3 || l_flavor == CIL_CONS_T3) {
- if (expr_flavor != CIL_MLSVALIDATETRANS) {
- cil_log(CIL_ERR, "u3, r3, and t3 can only be used with mlsvalidatetrans rules\n");
+ if (expr_flavor != CIL_VALIDATETRANS && expr_flavor != CIL_MLSVALIDATETRANS) {
+ cil_log(CIL_ERR, "u3, r3, and t3 can only be used with (mls)validatetrans rules\n");
goto exit;
}
}
--
2.20.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Non-DoD Source] [PATCH] libsepol/cil: Allow validatetrans rules to be resolved
2019-05-21 11:22 [PATCH] libsepol/cil: Allow validatetrans rules to be resolved Richard Haines
@ 2019-05-21 17:59 ` jwcart2
2019-05-23 14:05 ` jwcart2
0 siblings, 1 reply; 3+ messages in thread
From: jwcart2 @ 2019-05-21 17:59 UTC (permalink / raw)
To: Richard Haines, selinux; +Cc: sds
On 5/21/19 7:22 AM, Richard Haines wrote:
> When validatetrans rule is in CIL policy it errors with:
> u3, r3, and t3 can only be used with mlsvalidatetrans rules
>
> Will now resolve these examples:
> (validatetrans binder (and (and (eq t1 t1_t) (eq t2 t2_t)) (eq t3 t3_t)))
> (mlsvalidatetrans file (and (and (eq t1 t1_t) (eq t2 t2_t))
> (and (eq t3 t3_t) (domby h1 h2))))
>
> Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
Acked-by: James Carter <jwcart2@tycho.nsa.gov>
> ---
> libsepol/cil/src/cil_verify.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/libsepol/cil/src/cil_verify.c b/libsepol/cil/src/cil_verify.c
> index 1036d73..1a21cf4 100644
> --- a/libsepol/cil/src/cil_verify.c
> +++ b/libsepol/cil/src/cil_verify.c
> @@ -221,8 +221,8 @@ int cil_verify_constraint_leaf_expr_syntax(enum cil_flavor l_flavor, enum cil_fl
> cil_log(CIL_ERR, "l1, l2, h1, and h2 cannot be used on the left side with a string or list on the right side\n");
> goto exit;
> } else if (l_flavor == CIL_CONS_U3 || l_flavor == CIL_CONS_R3 || l_flavor == CIL_CONS_T3) {
> - if (expr_flavor != CIL_MLSVALIDATETRANS) {
> - cil_log(CIL_ERR, "u3, r3, and t3 can only be used with mlsvalidatetrans rules\n");
> + if (expr_flavor != CIL_VALIDATETRANS && expr_flavor != CIL_MLSVALIDATETRANS) {
> + cil_log(CIL_ERR, "u3, r3, and t3 can only be used with (mls)validatetrans rules\n");
> goto exit;
> }
> }
>
--
James Carter <jwcart2@tycho.nsa.gov>
National Security Agency
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Non-DoD Source] [PATCH] libsepol/cil: Allow validatetrans rules to be resolved
2019-05-21 17:59 ` [Non-DoD Source] " jwcart2
@ 2019-05-23 14:05 ` jwcart2
0 siblings, 0 replies; 3+ messages in thread
From: jwcart2 @ 2019-05-23 14:05 UTC (permalink / raw)
To: Richard Haines, selinux; +Cc: sds
On 5/21/19 1:59 PM, jwcart2 wrote:
> On 5/21/19 7:22 AM, Richard Haines wrote:
>> When validatetrans rule is in CIL policy it errors with:
>> u3, r3, and t3 can only be used with mlsvalidatetrans rules
>>
>> Will now resolve these examples:
>> (validatetrans binder (and (and (eq t1 t1_t) (eq t2 t2_t)) (eq t3 t3_t)))
>> (mlsvalidatetrans file (and (and (eq t1 t1_t) (eq t2 t2_t))
>> (and (eq t3 t3_t) (domby h1 h2))))
>>
>> Signed-off-by: Richard Haines <richard_c_haines@btinternet.com>
>
> Acked-by: James Carter <jwcart2@tycho.nsa.gov>
>
Applied.
Thanks,
Jim
>> ---
>> libsepol/cil/src/cil_verify.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/libsepol/cil/src/cil_verify.c b/libsepol/cil/src/cil_verify.c
>> index 1036d73..1a21cf4 100644
>> --- a/libsepol/cil/src/cil_verify.c
>> +++ b/libsepol/cil/src/cil_verify.c
>> @@ -221,8 +221,8 @@ int cil_verify_constraint_leaf_expr_syntax(enum cil_flavor
>> l_flavor, enum cil_fl
>> cil_log(CIL_ERR, "l1, l2, h1, and h2 cannot be used on the left
>> side with a string or list on the right side\n");
>> goto exit;
>> } else if (l_flavor == CIL_CONS_U3 || l_flavor == CIL_CONS_R3 ||
>> l_flavor == CIL_CONS_T3) {
>> - if (expr_flavor != CIL_MLSVALIDATETRANS) {
>> - cil_log(CIL_ERR, "u3, r3, and t3 can only be used with
>> mlsvalidatetrans rules\n");
>> + if (expr_flavor != CIL_VALIDATETRANS && expr_flavor !=
>> CIL_MLSVALIDATETRANS) {
>> + cil_log(CIL_ERR, "u3, r3, and t3 can only be used with
>> (mls)validatetrans rules\n");
>> goto exit;
>> }
>> }
>>
>
>
--
James Carter <jwcart2@tycho.nsa.gov>
National Security Agency
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-23 14:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-21 11:22 [PATCH] libsepol/cil: Allow validatetrans rules to be resolved Richard Haines
2019-05-21 17:59 ` [Non-DoD Source] " jwcart2
2019-05-23 14:05 ` jwcart2
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).