soc.lore.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthew Hagan <mnhagan88@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
	Matthew Hagan <mnhagan88@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Olof Johansson <olof@lixom.net>,
	soc@kernel.org, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	bcm-kernel-feedback-list@broadcom.com,
	Sam Ravnborg <sam@ravnborg.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/5] ARM: dts: NSP: Add common bindings for MX64/MX65
Date: Fri, 11 Jun 2021 00:27:15 +0100	[thread overview]
Message-ID: <20210610232727.1383117-4-mnhagan88@gmail.com> (raw)
Message-ID: <20210610232715.YUSQn3NNGwkV9QzVzSaMczfXGyA7_D6D_HX7RPX_RWA@z> (raw)
In-Reply-To: <20210610232727.1383117-1-mnhagan88@gmail.com>

These bindings are required for all Meraki MX64/MX65 devices.

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
 .../dts/bcm958625-meraki-mx6x-common.dtsi     | 148 ++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi

diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..47a30dedf7b3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		red {
+			label = "red:led";
+			pwms = <&pwm 1 50000>;
+		};
+
+		green {
+			label = "green:led";
+			pwms = <&pwm 2 50000>;
+		};
+
+		blue {
+			label = "blue:led";
+			pwms = <&pwm 3 50000>;
+		};
+	};
+};
+
+&L2 {
+	arm,io-coherent;
+	prefetch-data = <1>;
+	prefetch-instr = <1>;
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	at24@50 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&nand {
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "senao_nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&qspi {
+	status = "disabled";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pwm {
+	status = "okay";
+	#pwm-cells = <2>;
+	chan0 {
+		channel = <1>;
+		active_low = <1>;
+		};
+	chan1 {
+		channel = <2>;
+		active_low = <1>;
+	};
+	chan2 {
+		channel = <3>;
+		active_low = <1>;
+	};
+};
+
+&ccbtimer1 {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
-- 
2.26.3


  parent reply	other threads:[~2021-06-10 23:29 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-10 23:27 [PATCH v2 0/5] ARM: dts: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-06-10 23:27 ` Matthew Hagan
2021-06-10 23:27 ` Matthew Hagan
2021-06-10 23:27 ` [PATCH v2 1/5] dt-bindings: arm: bcm: " Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-11 19:46   ` Vladimir Oltean
2021-06-11 19:46     ` Vladimir Oltean
2021-06-12  9:21     ` Matthew Hagan
2021-06-12  9:21       ` Matthew Hagan
2021-06-12 15:07       ` Vladimir Oltean
2021-06-12 15:07         ` Vladimir Oltean
2021-06-10 23:27 ` [PATCH v2 2/5] ARM: dts: NSP: Add Meraki MX64/MX65 to Makefile Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-11 20:24   ` Vladimir Oltean
2021-06-11 20:24     ` Vladimir Oltean
2021-06-12  9:23     ` Matthew Hagan
2021-06-12  9:23       ` Matthew Hagan
2021-06-10 23:27 ` Matthew Hagan [this message]
2021-06-10 23:27   ` [PATCH v2 3/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-11 20:30   ` Vladimir Oltean
2021-06-11 20:30     ` Vladimir Oltean
2021-06-12 23:14     ` Matthew Hagan
2021-06-12 23:14       ` Matthew Hagan
2021-06-13  2:03       ` Florian Fainelli
2021-06-13  2:03         ` Florian Fainelli
2021-06-10 23:27 ` [PATCH v2 4/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-10 23:27 ` [PATCH v2 5/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-10 23:27   ` Matthew Hagan
2021-06-11 19:02   ` Matthew Hagan
2021-06-11 19:02     ` Matthew Hagan
2021-06-11 19:02     ` Matthew Hagan
2021-06-11 20:48   ` Vladimir Oltean
2021-06-11 20:48     ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210610232727.1383117-4-mnhagan88@gmail.com \
    --to=mnhagan88@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=olteanv@gmail.com \
    --cc=rjui@broadcom.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=sbranden@broadcom.com \
    --cc=soc@kernel.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).