[PATCH v2 0/5] ARM: gemini: add two more board

[PATCH v2 0/5] ARM: gemini: add two more board

[Corentin Labbe]

I have two boards with a SL3516 SoC. Both are NAS box.

Changes since v1:
- ssi1328 use now redboot-fis partitions
- added pinctrl as asked by Linus Walleij

Corentin Labbe (5):
  ARM: dts: gemini: add labels for USB, IDE, flash and ethernet
  dt-bindings: add vendor prefix for edimax
  dt-bindings: add vendor prefix for ssi
  ARM: gemini: add device tree for edimax NS2502
  ARM: gemini: add device tree for ssi1328

 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/gemini-ns2502.dts           | 148 ++++++++++++++++++
 arch/arm/boot/dts/gemini-ssi1328.dts          | 138 ++++++++++++++++
 arch/arm/boot/dts/gemini.dtsi                 |  12 +-
 5 files changed, 298 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts
 create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts

-- 
2.31.1

[PATCH v2 0/5] ARM: gemini: add two more board

[Corentin Labbe]

I have two boards with a SL3516 SoC. Both are NAS box.

Changes since v1:
- ssi1328 use now redboot-fis partitions
- added pinctrl as asked by Linus Walleij

Corentin Labbe (5):
  ARM: dts: gemini: add labels for USB, IDE, flash and ethernet
  dt-bindings: add vendor prefix for edimax
  dt-bindings: add vendor prefix for ssi
  ARM: gemini: add device tree for edimax NS2502
  ARM: gemini: add device tree for ssi1328

 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/gemini-ns2502.dts           | 148 ++++++++++++++++++
 arch/arm/boot/dts/gemini-ssi1328.dts          | 138 ++++++++++++++++
 arch/arm/boot/dts/gemini.dtsi                 |  12 +-
 5 files changed, 298 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts
 create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts

-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet

[Corentin Labbe]

Adding label will help simplify boards's dts.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/gemini.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index cc053af3c347..9fe0fd93ac9e 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -16,7 +16,7 @@ soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
-		flash@30000000 {
+		flash: flash@30000000 {
 			compatible = "cortina,gemini-flash", "cfi-flash";
 			syscon = <&syscon>;
 			pinctrl-names = "default";
@@ -322,7 +322,7 @@ pci_intc: interrupt-controller {
 			};
 		};
 
-		ethernet@60000000 {
+		ethernet: ethernet@60000000 {
 			compatible = "cortina,gemini-ethernet";
 			reg = <0x60000000 0x4000>, /* Global registers, queue */
 			      <0x60004000 0x2000>, /* V-bit */
@@ -365,7 +365,7 @@ crypto: crypto@62000000 {
 			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
 		};
 
-		ide@63000000 {
+		ide0: ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -378,7 +378,7 @@ ide@63000000 {
 			#size-cells = <0>;
 		};
 
-		ide@63400000 {
+		ide1: ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -421,7 +421,7 @@ display-controller@6a000000 {
 			status = "disabled";
 		};
 
-		usb@68000000 {
+		usb0: usb@68000000 {
 			compatible = "cortina,gemini-usb", "faraday,fotg210";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +442,7 @@ usb@68000000 {
 			status = "disabled";
 		};
 
-		usb@69000000 {
+		usb1: usb@69000000 {
 			compatible = "cortina,gemini-usb", "faraday,fotg210";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.31.1

[PATCH v2 1/5] ARM: dts: gemini: add labels for USB, IDE, flash and ethernet

[Corentin Labbe]

Adding label will help simplify boards's dts.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/gemini.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index cc053af3c347..9fe0fd93ac9e 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -16,7 +16,7 @@ soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&intcon>;
 
-		flash@30000000 {
+		flash: flash@30000000 {
 			compatible = "cortina,gemini-flash", "cfi-flash";
 			syscon = <&syscon>;
 			pinctrl-names = "default";
@@ -322,7 +322,7 @@ pci_intc: interrupt-controller {
 			};
 		};
 
-		ethernet@60000000 {
+		ethernet: ethernet@60000000 {
 			compatible = "cortina,gemini-ethernet";
 			reg = <0x60000000 0x4000>, /* Global registers, queue */
 			      <0x60004000 0x2000>, /* V-bit */
@@ -365,7 +365,7 @@ crypto: crypto@62000000 {
 			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
 		};
 
-		ide@63000000 {
+		ide0: ide@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;
 			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -378,7 +378,7 @@ ide@63000000 {
 			#size-cells = <0>;
 		};
 
-		ide@63400000 {
+		ide1: ide@63400000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63400000 0x1000>;
 			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -421,7 +421,7 @@ display-controller@6a000000 {
 			status = "disabled";
 		};
 
-		usb@68000000 {
+		usb0: usb@68000000 {
 			compatible = "cortina,gemini-usb", "faraday,fotg210";
 			reg = <0x68000000 0x1000>;
 			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +442,7 @@ usb@68000000 {
 			status = "disabled";
 		};
 
-		usb@69000000 {
+		usb1: usb@69000000 {
 			compatible = "cortina,gemini-usb", "faraday,fotg210";
 			reg = <0x69000000 0x1000>;
 			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/5] dt-bindings: add vendor prefix for edimax

[Corentin Labbe]

Add vendor prefix for EDIMAX Technology Co., Ltd (https://www.edimax.com/)

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ed1769310f0d..800d0536be75 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -333,6 +333,8 @@ patternProperties:
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^edimax,.*":
+    description: EDIMAX Technology Co., Ltd
   "^edt,.*":
     description: Emerging Display Technologies
   "^eeti,.*":
-- 
2.31.1

[PATCH v2 2/5] dt-bindings: add vendor prefix for edimax

[Corentin Labbe]

Add vendor prefix for EDIMAX Technology Co., Ltd (https://www.edimax.com/)

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ed1769310f0d..800d0536be75 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -333,6 +333,8 @@ patternProperties:
     description: EBV Elektronik
   "^eckelmann,.*":
     description: Eckelmann AG
+  "^edimax,.*":
+    description: EDIMAX Technology Co., Ltd
   "^edt,.*":
     description: Emerging Display Technologies
   "^eeti,.*":
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 3/5] dt-bindings: add vendor prefix for ssi

[Corentin Labbe]

Add vendor prefix for SSI Computer Corp (https://www.ssi.com.tw/)

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 800d0536be75..6d70d6ba60a0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1090,6 +1090,8 @@ patternProperties:
     description: Spansion Inc.
   "^sprd,.*":
     description: Spreadtrum Communications Inc.
+  "^ssi,.*":
+    description: SSI Computer Corp
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
   "^sstar,.*":
-- 
2.31.1

[PATCH v2 3/5] dt-bindings: add vendor prefix for ssi

[Corentin Labbe]

Add vendor prefix for SSI Computer Corp (https://www.ssi.com.tw/)

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 800d0536be75..6d70d6ba60a0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1090,6 +1090,8 @@ patternProperties:
     description: Spansion Inc.
   "^sprd,.*":
     description: Spreadtrum Communications Inc.
+  "^ssi,.*":
+    description: SSI Computer Corp
   "^sst,.*":
     description: Silicon Storage Technology, Inc.
   "^sstar,.*":
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502

[Corentin Labbe]

The edimax NS2502 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/Makefile          |   1 +
 arch/arm/boot/dts/gemini-ns2502.dts | 148 ++++++++++++++++++++++++++++
 2 files changed, 149 insertions(+)
 create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..806715f3266d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -217,6 +217,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-dlink-dir-685.dtb \
 	gemini-dlink-dns-313.dtb \
 	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
new file mode 100644
index 000000000000..704abd212df5
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+			/* We lack the knowledge of necessary GPIO to achieve
+			 * Gigabit
+			 */
+			max-speed = <100>;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x00020000>;
+		};
+		partition@20000 {
+			label = "kernel";
+			reg = <0x00020000 0x00700000>;
+		};
+		partition@720000 {
+			label = "VCTL";
+			reg = <0x00720000 0x00020000>;
+		};
+		partition@740000 {
+			label = "CurConf";
+			reg = <0x00740000 0x000a0000>;
+		};
+		partition@7e0000 {
+			label = "FIS";
+			reg = <0x007e0000 0x00010000>;
+		};
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.31.1

[PATCH v2 4/5] ARM: gemini: add device tree for edimax NS2502

[Corentin Labbe]

The edimax NS2502 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/Makefile          |   1 +
 arch/arm/boot/dts/gemini-ns2502.dts | 148 ++++++++++++++++++++++++++++
 2 files changed, 149 insertions(+)
 create mode 100644 arch/arm/boot/dts/gemini-ns2502.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..806715f3266d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -217,6 +217,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-dlink-dir-685.dtb \
 	gemini-dlink-dns-313.dtb \
 	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
new file mode 100644
index 000000000000..704abd212df5
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+			/* We lack the knowledge of necessary GPIO to achieve
+			 * Gigabit
+			 */
+			max-speed = <100>;
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x00020000>;
+		};
+		partition@20000 {
+			label = "kernel";
+			reg = <0x00020000 0x00700000>;
+		};
+		partition@720000 {
+			label = "VCTL";
+			reg = <0x00720000 0x00020000>;
+		};
+		partition@740000 {
+			label = "CurConf";
+			reg = <0x00740000 0x000a0000>;
+		};
+		partition@7e0000 {
+			label = "FIS";
+			reg = <0x007e0000 0x00010000>;
+		};
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Corentin Labbe]

The SSI 1328 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
 2 files changed, 139 insertions(+)
 create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 806715f3266d..49bf7af72111 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
 	gemini-wbd111.dtb \
 	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
new file mode 100644
index 000000000000..2b3e7db84fed
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+			/* We lack the knowledge of necessary GPIO to achieve
+			 * Gigabit
+			 */
+			max-speed = <100>;
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.31.1

[PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Corentin Labbe]

The SSI 1328 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 arch/arm/boot/dts/Makefile           |   1 +
 arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
 2 files changed, 139 insertions(+)
 create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 806715f3266d..49bf7af72111 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
 	gemini-rut1xx.dtb \
 	gemini-sl93512r.dtb \
 	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
 	gemini-wbd111.dtb \
 	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
new file mode 100644
index 000000000000..2b3e7db84fed
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+			/* We lack the knowledge of necessary GPIO to achieve
+			 * Gigabit
+			 */
+			max-speed = <100>;
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
-- 
2.31.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Rob Herring]

On Fri, Jun 18, 2021 at 08:55:33PM +0000, Corentin Labbe wrote:
> The SSI 1328 is a NAS box running a SL3516 SoC.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
>  2 files changed, 139 insertions(+)
>  create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 806715f3266d..49bf7af72111 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
>  	gemini-rut1xx.dtb \
>  	gemini-sl93512r.dtb \
>  	gemini-sq201.dtb \
> +	gemini-ssi1328.dtb \
>  	gemini-wbd111.dtb \
>  	gemini-wbd222.dtb
>  dtb-$(CONFIG_ARCH_HI3xxx) += \
> diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
> new file mode 100644
> index 000000000000..2b3e7db84fed
> --- /dev/null
> +++ b/arch/arm/boot/dts/gemini-ssi1328.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0

Dual license? No one runs BSD or other OS on these devices?

> +/*
> + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
> + * Device Tree file for SSI 1328
> + */
> +
> +/dts-v1/;
> +
> +#include "gemini.dtsi"

Though the license should match this file.

> +
> +/ {
> +	model = "SSI 1328";
> +	compatible = "ssi,1328", "cortina,gemini";

Where's ssi,1328 documented?

> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	memory@0 {
> +		/* 128 MB */
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>;
> +	};
> +
> +	aliases {
> +		mdio-gpio0 = &mdio0;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> +		stdout-path = &uart0;

Don't need both 'console' and stdout-path. (console should be removed)

> +	};
> +
> +	mdio0: mdio {
> +		compatible = "virtual,mdio-gpio";
> +		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
> +			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* LAN Marvell 88E1118 */
> +		phy0: ethernet-phy@1 {
> +			reg = <1>;
> +			device_type = "ethernet-phy";
> +			/* We lack the knowledge of necessary GPIO to achieve
> +			 * Gigabit
> +			 */
> +			max-speed = <100>;
> +		};
> +		/* WAN ICPlus IP101A */
> +		phy1: ethernet-phy@2 {
> +			reg = <2>;
> +			device_type = "ethernet-phy";
> +		};
> +	};
> +};
> +
> +&ethernet {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy0>;
> +	};
> +	ethernet-port@1 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy1>;
> +	};
> +};
> +
> +&flash {
> +	status = "okay";
> +	/* 32MB of flash */
> +	reg = <0x30000000 0x03200000>;
> +
> +	pinctrl-names = "enabled", "disabled";
> +	pinctrl-0 = <&pflash_default_pins>;
> +	pinctrl-1 = <&pflash_disabled_pins>;
> +
> +	partitions {
> +		compatible = "redboot-fis";
> +		/* Eraseblock at 0xfe0000 */
> +		fis-index-block = <0x7F>;
> +	};
> +};
> +
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gpio0_default_pins>;
> +};
> +
> +&ide0 {
> +	status = "okay";
> +};
> +
> +&ide1 {
> +	status = "okay";
> +};
> +
> +&sata {
> +	cortina,gemini-ata-muxmode = <0>;
> +	cortina,gemini-enable-sata-bridge;
> +	status = "okay";
> +};
> +
> +&syscon {
> +	pinctrl {
> +		/*
> +		 * gpio0agrp cover line 0-4
> +		 * gpio0bgrp cover line 5
> +		 */
> +		gpio0_default_pins: pinctrl-gpio0 {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0agrp", "gpio0bgrp";
> +			};
> +		};
> +		pflash_disabled_pins: pinctrl-pflash-disabled {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
> +					 "gpio0kgrp";
> +			};
> +		};
> +		pinctrl-gmii {
> +			/* This platform use both the ethernet ports */
> +			mux {
> +				function = "gmii";
> +				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
> +			};
> +		};
> +	};
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +};
> -- 
> 2.31.1
> 
> 

Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Rob Herring]

On Fri, Jun 18, 2021 at 08:55:33PM +0000, Corentin Labbe wrote:
> The SSI 1328 is a NAS box running a SL3516 SoC.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  arch/arm/boot/dts/Makefile           |   1 +
>  arch/arm/boot/dts/gemini-ssi1328.dts | 138 +++++++++++++++++++++++++++
>  2 files changed, 139 insertions(+)
>  create mode 100644 arch/arm/boot/dts/gemini-ssi1328.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 806715f3266d..49bf7af72111 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -221,6 +221,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
>  	gemini-rut1xx.dtb \
>  	gemini-sl93512r.dtb \
>  	gemini-sq201.dtb \
> +	gemini-ssi1328.dtb \
>  	gemini-wbd111.dtb \
>  	gemini-wbd222.dtb
>  dtb-$(CONFIG_ARCH_HI3xxx) += \
> diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
> new file mode 100644
> index 000000000000..2b3e7db84fed
> --- /dev/null
> +++ b/arch/arm/boot/dts/gemini-ssi1328.dts
> @@ -0,0 +1,138 @@
> +// SPDX-License-Identifier: GPL-2.0

Dual license? No one runs BSD or other OS on these devices?

> +/*
> + * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
> + * Device Tree file for SSI 1328
> + */
> +
> +/dts-v1/;
> +
> +#include "gemini.dtsi"

Though the license should match this file.

> +
> +/ {
> +	model = "SSI 1328";
> +	compatible = "ssi,1328", "cortina,gemini";

Where's ssi,1328 documented?

> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	memory@0 {
> +		/* 128 MB */
> +		device_type = "memory";
> +		reg = <0x00000000 0x8000000>;
> +	};
> +
> +	aliases {
> +		mdio-gpio0 = &mdio0;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> +		stdout-path = &uart0;

Don't need both 'console' and stdout-path. (console should be removed)

> +	};
> +
> +	mdio0: mdio {
> +		compatible = "virtual,mdio-gpio";
> +		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
> +			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* LAN Marvell 88E1118 */
> +		phy0: ethernet-phy@1 {
> +			reg = <1>;
> +			device_type = "ethernet-phy";
> +			/* We lack the knowledge of necessary GPIO to achieve
> +			 * Gigabit
> +			 */
> +			max-speed = <100>;
> +		};
> +		/* WAN ICPlus IP101A */
> +		phy1: ethernet-phy@2 {
> +			reg = <2>;
> +			device_type = "ethernet-phy";
> +		};
> +	};
> +};
> +
> +&ethernet {
> +	status = "okay";
> +	ethernet-port@0 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy0>;
> +	};
> +	ethernet-port@1 {
> +		phy-mode = "rgmii";
> +		phy-handle = <&phy1>;
> +	};
> +};
> +
> +&flash {
> +	status = "okay";
> +	/* 32MB of flash */
> +	reg = <0x30000000 0x03200000>;
> +
> +	pinctrl-names = "enabled", "disabled";
> +	pinctrl-0 = <&pflash_default_pins>;
> +	pinctrl-1 = <&pflash_disabled_pins>;
> +
> +	partitions {
> +		compatible = "redboot-fis";
> +		/* Eraseblock at 0xfe0000 */
> +		fis-index-block = <0x7F>;
> +	};
> +};
> +
> +&gpio0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gpio0_default_pins>;
> +};
> +
> +&ide0 {
> +	status = "okay";
> +};
> +
> +&ide1 {
> +	status = "okay";
> +};
> +
> +&sata {
> +	cortina,gemini-ata-muxmode = <0>;
> +	cortina,gemini-enable-sata-bridge;
> +	status = "okay";
> +};
> +
> +&syscon {
> +	pinctrl {
> +		/*
> +		 * gpio0agrp cover line 0-4
> +		 * gpio0bgrp cover line 5
> +		 */
> +		gpio0_default_pins: pinctrl-gpio0 {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0agrp", "gpio0bgrp";
> +			};
> +		};
> +		pflash_disabled_pins: pinctrl-pflash-disabled {
> +			mux {
> +				function = "gpio0";
> +				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
> +					 "gpio0kgrp";
> +			};
> +		};
> +		pinctrl-gmii {
> +			/* This platform use both the ethernet ports */
> +			mux {
> +				function = "gmii";
> +				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
> +			};
> +		};
> +	};
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	status = "okay";
> +};
> -- 
> 2.31.1
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 2/5] dt-bindings: add vendor prefix for edimax

[Rob Herring]

On Fri, 18 Jun 2021 20:55:30 +0000, Corentin Labbe wrote:
> Add vendor prefix for EDIMAX Technology Co., Ltd (https://www.edimax.com/)
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 2/5] dt-bindings: add vendor prefix for edimax

[Rob Herring]

On Fri, 18 Jun 2021 20:55:30 +0000, Corentin Labbe wrote:
> Add vendor prefix for EDIMAX Technology Co., Ltd (https://www.edimax.com/)
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 3/5] dt-bindings: add vendor prefix for ssi

[Rob Herring]

On Fri, 18 Jun 2021 20:55:31 +0000, Corentin Labbe wrote:
> Add vendor prefix for SSI Computer Corp (https://www.ssi.com.tw/)
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v2 3/5] dt-bindings: add vendor prefix for ssi

[Rob Herring]

On Fri, 18 Jun 2021 20:55:31 +0000, Corentin Labbe wrote:
> Add vendor prefix for SSI Computer Corp (https://www.ssi.com.tw/)
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 0/5] ARM: gemini: add two more board

[Linus Walleij]

On Fri, Jun 18, 2021 at 10:55 PM Corentin Labbe <clabbe@baylibre.com> wrote:

> I have two boards with a SL3516 SoC. Both are NAS box.
>
> Changes since v1:
> - ssi1328 use now redboot-fis partitions
> - added pinctrl as asked by Linus Walleij
>
> Corentin Labbe (5):
>   ARM: dts: gemini: add labels for USB, IDE, flash and ethernet
>   dt-bindings: add vendor prefix for edimax
>   dt-bindings: add vendor prefix for ssi
>   ARM: gemini: add device tree for edimax NS2502
>   ARM: gemini: add device tree for ssi1328

Thanks Corentin!

All patches applied for v5.15, I saw that the NS2502 does
not make use of the redboot FIS partition table but that's
no big deal, you can send a separate patch to fix that
when you can test it.

Yours,
Linus Walleij

Re: [PATCH v2 0/5] ARM: gemini: add two more board

[Linus Walleij]

On Fri, Jun 18, 2021 at 10:55 PM Corentin Labbe <clabbe@baylibre.com> wrote:

> I have two boards with a SL3516 SoC. Both are NAS box.
>
> Changes since v1:
> - ssi1328 use now redboot-fis partitions
> - added pinctrl as asked by Linus Walleij
>
> Corentin Labbe (5):
>   ARM: dts: gemini: add labels for USB, IDE, flash and ethernet
>   dt-bindings: add vendor prefix for edimax
>   dt-bindings: add vendor prefix for ssi
>   ARM: gemini: add device tree for edimax NS2502
>   ARM: gemini: add device tree for ssi1328

Thanks Corentin!

All patches applied for v5.15, I saw that the NS2502 does
not make use of the redboot FIS partition table but that's
no big deal, you can send a separate patch to fix that
when you can test it.

Yours,
Linus Walleij

Re: [PATCH v2 0/5] ARM: gemini: add two more board

[Linus Walleij]

On Fri, Jun 18, 2021 at 10:55 PM Corentin Labbe <clabbe@baylibre.com> wrote:

> I have two boards with a SL3516 SoC. Both are NAS box.
>
> Changes since v1:
> - ssi1328 use now redboot-fis partitions
> - added pinctrl as asked by Linus Walleij
>
> Corentin Labbe (5):
>   ARM: dts: gemini: add labels for USB, IDE, flash and ethernet
>   dt-bindings: add vendor prefix for edimax
>   dt-bindings: add vendor prefix for ssi
>   ARM: gemini: add device tree for edimax NS2502
>   ARM: gemini: add device tree for ssi1328

Thanks Corentin!

All patches applied for v5.15, I saw that the NS2502 does
not make use of the redboot FIS partition table but that's
no big deal, you can send a separate patch to fix that
when you can test it.

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Linus Walleij]

Thanks Rob,

I fixed some issues while applying.

On Mon, Jul 12, 2021 at 10:11 PM Rob Herring <robh@kernel.org> wrote:

> > +     model = "SSI 1328";
> > +     compatible = "ssi,1328", "cortina,gemini";
>
> Where's ssi,1328 documented?

I'll take a sweep and add all of the new machines.

> > +     chosen {
> > +             bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> > +             stdout-path = &uart0;
>
> Don't need both 'console' and stdout-path. (console should be removed)

How does one specify a default baudrate using that method?

Yours,
Linus Walleij

Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Linus Walleij]

Thanks Rob,

I fixed some issues while applying.

On Mon, Jul 12, 2021 at 10:11 PM Rob Herring <robh@kernel.org> wrote:

> > +     model = "SSI 1328";
> > +     compatible = "ssi,1328", "cortina,gemini";
>
> Where's ssi,1328 documented?

I'll take a sweep and add all of the new machines.

> > +     chosen {
> > +             bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> > +             stdout-path = &uart0;
>
> Don't need both 'console' and stdout-path. (console should be removed)

How does one specify a default baudrate using that method?

Yours,
Linus Walleij

Re: [PATCH v2 5/5] ARM: gemini: add device tree for ssi1328

[Linus Walleij]

Thanks Rob,

I fixed some issues while applying.

On Mon, Jul 12, 2021 at 10:11 PM Rob Herring <robh@kernel.org> wrote:

> > +     model = "SSI 1328";
> > +     compatible = "ssi,1328", "cortina,gemini";
>
> Where's ssi,1328 documented?

I'll take a sweep and add all of the new machines.

> > +     chosen {
> > +             bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
> > +             stdout-path = &uart0;
>
> Don't need both 'console' and stdout-path. (console should be removed)

How does one specify a default baudrate using that method?

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel