* [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
@ 2021-08-06 20:44 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (7 more replies)
0 siblings, 8 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
` (5 subsequent siblings)
7 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (6 subsequent siblings)
7 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
Changes from v2:
- Introduce boards to Makefile in same patch as the board dts is added
(Vladimir Oltean)
- Use alphabetical ordering for labels (Vladimir Oltean)
- Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
Oltean)
- Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
- Various LED fixes, utilising dt-bindings/leds/common.h and correctly
specifying LEDs in the form "led-N" and with the color/function/
function-enumerator properties.
- Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
The following changes were submitted as a separate series:
- Introduce patches to disable QSPI by default and enable where used
(Vladimir Oltean)
- Move mdio@18032000 node from board related file to SoC (Vladimir
Oltean)
- In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
the resulting usb3_phy issues
Changes from v3:
- Sort labels on mx64 a0 dts files into alphabetical order as well
- move include directives for input/input.h and leds/common.h to
bcm958625-mx6x-common.dtsi
- Whitespace fixes in bcm958625-mx6x-common.dtsi
- rename "senao_nvram" partition to "nvram"
Changes from v4:
- Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
each .dts file (Arnd Bergmann).
- Append [@<unit-address>] to memory nodes.
- Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
- Append read-only property to at24 eeprom node.
- Remove L2 properties which should be defined at platform-level.
- Correct NAND node names.
Matthew Hagan (5):
ARM: dts: NSP: Add common bindings for MX64/MX65
ARM: dts: NSP: Add Ax stepping modifications
ARM: dts: NSP: Add DT files for Meraki MX64 series
ARM: dts: NSP: Add DT files for Meraki MX65 series
dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
.../devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 +
arch/arm/boot/dts/Makefile | 6 +
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 71 +++++
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 ++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 ++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 +++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++
12 files changed, 824 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (2 more replies)
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
` (4 subsequent siblings)
7 siblings, 3 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
These bindings are required for all Meraki MX64/MX65 devices. These
common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
partitions, EHCI, OHCI and pinctrl.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
.../dts/bcm958625-meraki-mx6x-common.dtsi | 129 ++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..bcdd38954f1d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ pwm-leds {
+ compatible = "pwm-leds";
+
+ led-1 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ pwms = <&pwm 1 50000>;
+ max-brightness = <255>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ pwms = <&pwm 2 50000>;
+ max-brightness = <255>;
+ };
+
+ led-3 {
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ pwms = <&pwm 3 50000>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&amac2 {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ at24@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ read-only;
+ };
+};
+
+&nand_controller {
+ nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "shmoo";
+ reg = <0x80000 0x80000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "bootkernel1";
+ reg = <0x100000 0x300000>;
+ };
+
+ partition@400000 {
+ label = "nvram";
+ reg = <0x400000 0x100000>;
+ };
+
+ partition@500000 {
+ label = "bootkernel2";
+ reg = <0x500000 0x300000>;
+ };
+
+ partition@800000 {
+ label = "ubi";
+ reg = <0x800000 0x3f700000>;
+ };
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_leds>;
+
+ pwm_leds: pwm_leds {
+ function = "pwm";
+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+ };
+};
+
+&pwm {
+ status = "okay";
+ #pwm-cells = <2>;
+};
+
+&uart0 {
+ clock-frequency = <62500000>;
+ status = "okay";
+};
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
` (2 preceding siblings ...)
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (2 more replies)
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
` (3 subsequent siblings)
7 siblings, 3 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Viresh Kumar,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
While uncommon, some Ax NSP SoCs exist in the wild. This stepping
requires a modified secondary CPU boot-reg and removal of DMA coherency
properties. Without these modifications, the secondary CPU will be
inactive and many peripherals will exhibit undefined behaviour.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..a21e275935ce
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+ secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+ /delete-property/ dma-coherent;
+};
+
+&sdio {
+ /delete-property/ dma-coherent;
+};
+
+&amac0 {
+ /delete-property/ dma-coherent;
+};
+
+&amac1 {
+ /delete-property/ dma-coherent;
+};
+
+&amac2 {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&mailbox {
+ /delete-property/ dma-coherent;
+};
+
+&xhci {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&ohci0 {
+ /delete-property/ dma-coherent;
+};
+
+&i2c0 {
+ /delete-property/ dma-coherent;
+};
+
+&sata {
+ /delete-property/ dma-coherent;
+};
+
+&pcie0 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie1 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie2 {
+ /delete-property/ dma-coherent;
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Viresh Kumar,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
While uncommon, some Ax NSP SoCs exist in the wild. This stepping
requires a modified secondary CPU boot-reg and removal of DMA coherency
properties. Without these modifications, the secondary CPU will be
inactive and many peripherals will exhibit undefined behaviour.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..a21e275935ce
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+ secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+ /delete-property/ dma-coherent;
+};
+
+&sdio {
+ /delete-property/ dma-coherent;
+};
+
+&amac0 {
+ /delete-property/ dma-coherent;
+};
+
+&amac1 {
+ /delete-property/ dma-coherent;
+};
+
+&amac2 {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&mailbox {
+ /delete-property/ dma-coherent;
+};
+
+&xhci {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&ohci0 {
+ /delete-property/ dma-coherent;
+};
+
+&i2c0 {
+ /delete-property/ dma-coherent;
+};
+
+&sata {
+ /delete-property/ dma-coherent;
+};
+
+&pcie0 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie1 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie2 {
+ /delete-property/ dma-coherent;
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Krzysztof Kozlowski, Viresh Kumar,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
While uncommon, some Ax NSP SoCs exist in the wild. This stepping
requires a modified secondary CPU boot-reg and removal of DMA coherency
properties. Without these modifications, the secondary CPU will be
inactive and many peripherals will exhibit undefined behaviour.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/bcm-nsp-ax.dtsi | 70 +++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm-nsp-ax.dtsi
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..a21e275935ce
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+ secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+ /delete-property/ dma-coherent;
+};
+
+&sdio {
+ /delete-property/ dma-coherent;
+};
+
+&amac0 {
+ /delete-property/ dma-coherent;
+};
+
+&amac1 {
+ /delete-property/ dma-coherent;
+};
+
+&amac2 {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&mailbox {
+ /delete-property/ dma-coherent;
+};
+
+&xhci {
+ /delete-property/ dma-coherent;
+};
+
+&ehci0 {
+ /delete-property/ dma-coherent;
+};
+
+&ohci0 {
+ /delete-property/ dma-coherent;
+};
+
+&i2c0 {
+ /delete-property/ dma-coherent;
+};
+
+&sata {
+ /delete-property/ dma-coherent;
+};
+
+&pcie0 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie1 {
+ /delete-property/ dma-coherent;
+};
+
+&pcie2 {
+ /delete-property/ dma-coherent;
+};
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
` (3 preceding siblings ...)
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (2 more replies)
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
` (2 subsequent siblings)
7 siblings, 3 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
MX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 4 +
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 +++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 +++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 ++++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++++
6 files changed, 281 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..17f7bdab50ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958525xmc.dtb \
bcm958622hr.dtb \
bcm958623hr.dtb \
+ bcm958625-meraki-mx64.dtb \
+ bcm958625-meraki-mx64-a0.dtb \
+ bcm958625-meraki-mx64w.dtb \
+ bcm958625-meraki-mx64w-a0.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..7c487c74fd10
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:lan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:lan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:lan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:lan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* green:lan3-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ /* green:lan3-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <5>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ /* green:lan4-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ /* green:lan4-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <7>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ /* green:wan-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <8>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ /* green:wan-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <9>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+ };
+
+ led-a {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-b {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "lan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "lan2";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "lan3";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "lan4";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "wan";
+ reg = <4>;
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64(A0)";
+ compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64";
+ compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W(A0)";
+ compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W";
+ compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
MX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 4 +
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 +++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 +++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 ++++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++++
6 files changed, 281 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..17f7bdab50ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958525xmc.dtb \
bcm958622hr.dtb \
bcm958623hr.dtb \
+ bcm958625-meraki-mx64.dtb \
+ bcm958625-meraki-mx64-a0.dtb \
+ bcm958625-meraki-mx64w.dtb \
+ bcm958625-meraki-mx64w-a0.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..7c487c74fd10
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:lan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:lan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:lan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:lan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* green:lan3-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ /* green:lan3-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <5>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ /* green:lan4-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ /* green:lan4-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <7>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ /* green:wan-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <8>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ /* green:wan-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <9>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+ };
+
+ led-a {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-b {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "lan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "lan2";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "lan3";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "lan4";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "wan";
+ reg = <4>;
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64(A0)";
+ compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64";
+ compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W(A0)";
+ compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W";
+ compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
MX64 & MX64W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 internal switch (5x 1GbE ports)
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
This patch adds the Meraki MX64 series-specific bindings. Since some
devices make use of the older A0 SoC, changes need to be made to
accommodate this case, including removal of coherency options and
modification to the secondary-boot-reg.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 4 +
.../boot/dts/bcm958625-meraki-kingpin.dtsi | 163 ++++++++++++++++++
.../arm/boot/dts/bcm958625-meraki-mx64-a0.dts | 25 +++
arch/arm/boot/dts/bcm958625-meraki-mx64.dts | 24 +++
.../boot/dts/bcm958625-meraki-mx64w-a0.dts | 33 ++++
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts | 32 ++++
6 files changed, 281 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 863347b6b65e..17f7bdab50ef 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,10 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958525xmc.dtb \
bcm958622hr.dtb \
bcm958623hr.dtb \
+ bcm958625-meraki-mx64.dtb \
+ bcm958625-meraki-mx64-a0.dtb \
+ bcm958625-meraki-mx64w.dtb \
+ bcm958625-meraki-mx64w-a0.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..7c487c74fd10
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:lan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:lan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:lan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:lan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* green:lan3-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-5 {
+ /* green:lan3-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <5>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-6 {
+ /* green:lan4-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <6>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ };
+
+ led-7 {
+ /* green:lan4-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <7>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-8 {
+ /* green:wan-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <8>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+ };
+
+ led-9 {
+ /* green:wan-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <9>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+ };
+
+ led-a {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led-b {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+
+ ports {
+ port@0 {
+ label = "lan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "lan2";
+ reg = <1>;
+ };
+
+ port@2 {
+ label = "lan3";
+ reg = <2>;
+ };
+
+ port@3 {
+ label = "lan4";
+ reg = <3>;
+ };
+
+ port@4 {
+ label = "wan";
+ reg = <4>;
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64(A0)";
+ compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64";
+ compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W(A0)";
+ compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+ model = "Cisco Meraki MX64W";
+ compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
` (4 preceding siblings ...)
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (2 more replies)
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
7 siblings, 3 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Geert Uytterhoeven, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
4 files changed, 337 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 17f7bdab50ef..3586b540e3b6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -159,6 +159,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958625-meraki-mx64-a0.dtb \
bcm958625-meraki-mx64w.dtb \
bcm958625-meraki-mx64w-a0.dtb \
+ bcm958625-meraki-mx65.dtb \
+ bcm958625-meraki-mx65w.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..8860f2fefc63
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:wan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:wan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:wan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:wan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-5 {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x1803f1c0 0x4>;
+ mux-mask = <0x2000>;
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port6: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port7: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port8: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port9: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port10: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii1>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&phy_port6>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan9";
+ phy-handle = <&phy_port7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan10";
+ phy-handle = <&phy_port8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan11";
+ phy-handle = <&phy_port9>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan12";
+ phy-handle = <&phy_port10>;
+ };
+ };
+ };
+ };
+
+ mdio-mii@2000 {
+ reg = <0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port1: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port4: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port5: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <2 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii0>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ phy-handle = <&phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan6";
+ phy-handle = <&phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan7";
+ phy-handle = <&phy_port5>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ port@0 {
+ label = "wan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "wan2";
+ reg = <1>;
+ };
+
+ sgmii0: port@4 {
+ label = "sw0";
+ reg = <4>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sgmii1: port@5 {
+ label = "sw1";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65";
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65W";
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Geert Uytterhoeven, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
4 files changed, 337 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 17f7bdab50ef..3586b540e3b6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -159,6 +159,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958625-meraki-mx64-a0.dtb \
bcm958625-meraki-mx64w.dtb \
bcm958625-meraki-mx64w-a0.dtb \
+ bcm958625-meraki-mx65.dtb \
+ bcm958625-meraki-mx65w.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..8860f2fefc63
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:wan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:wan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:wan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:wan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-5 {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x1803f1c0 0x4>;
+ mux-mask = <0x2000>;
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port6: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port7: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port8: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port9: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port10: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii1>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&phy_port6>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan9";
+ phy-handle = <&phy_port7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan10";
+ phy-handle = <&phy_port8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan11";
+ phy-handle = <&phy_port9>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan12";
+ phy-handle = <&phy_port10>;
+ };
+ };
+ };
+ };
+
+ mdio-mii@2000 {
+ reg = <0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port1: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port4: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port5: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <2 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii0>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ phy-handle = <&phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan6";
+ phy-handle = <&phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan7";
+ phy-handle = <&phy_port5>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ port@0 {
+ label = "wan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "wan2";
+ reg = <1>;
+ };
+
+ sgmii0: port@4 {
+ label = "sw0";
+ reg = <4>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sgmii1: port@5 {
+ label = "sw1";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65";
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65W";
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Arnd Bergmann, Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Geert Uytterhoeven, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
MX65 & MX65W Hardware info:
- CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
- RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
- Storage: 1 GB (Micron MT29F8G08ABACA)
- Networking: BCM58625 switch (2x 1GbE ports)
2x Qualcomm QCA8337 switches (10x 1GbE ports total)
- PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
- USB: 1x USB2.0
- Serial: Internal header
- WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
Note that a driver and firmware image for the BCM59111 PSE has been
released under GPL, but this is not present in the kernel.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 279 ++++++++++++++++++
arch/arm/boot/dts/bcm958625-meraki-mx65.dts | 24 ++
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts | 32 ++
4 files changed, 337 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65.dts
create mode 100644 arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 17f7bdab50ef..3586b540e3b6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -159,6 +159,8 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \
bcm958625-meraki-mx64-a0.dtb \
bcm958625-meraki-mx64w.dtb \
bcm958625-meraki-mx64w-a0.dtb \
+ bcm958625-meraki-mx65.dtb \
+ bcm958625-meraki-mx65w.dtb \
bcm958625hr.dtb \
bcm988312hr.dtb \
bcm958625k.dtb
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..8860f2fefc63
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+ keys {
+ compatible = "gpio-keys-polled";
+ autorepeat;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* green:wan1-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led-1 {
+ /* green:wan1-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+ };
+
+ led-2 {
+ /* green:wan2-left */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+ };
+
+ led-3 {
+ /* green:wan2-right */
+ function = LED_FUNCTION_ACTIVITY;
+ function-enumerator = <3>;
+ color = <LED_COLOR_ID_GREEN>;
+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+ };
+
+ led-4 {
+ /* amber:power */
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ led-5 {
+ /* white:status */
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ mdio-mii-mux {
+ compatible = "mdio-mux-mmioreg";
+ reg = <0x1803f1c0 0x4>;
+ mux-mask = <0x2000>;
+ mdio-parent-bus = <&mdio_ext>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port6: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port7: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port8: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port9: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port10: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <1 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii1>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan8";
+ phy-handle = <&phy_port6>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan9";
+ phy-handle = <&phy_port7>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan10";
+ phy-handle = <&phy_port8>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan11";
+ phy-handle = <&phy_port9>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan12";
+ phy-handle = <&phy_port10>;
+ };
+ };
+ };
+ };
+
+ mdio-mii@2000 {
+ reg = <0x2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy_port1: phy@0 {
+ reg = <0>;
+ };
+
+ phy_port2: phy@1 {
+ reg = <1>;
+ };
+
+ phy_port3: phy@2 {
+ reg = <2>;
+ };
+
+ phy_port4: phy@3 {
+ reg = <3>;
+ };
+
+ phy_port5: phy@4 {
+ reg = <4>;
+ };
+
+ switch@10 {
+ compatible = "qca,qca8337";
+ reg = <0x10>;
+ dsa,member = <2 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ ethernet = <&sgmii0>;
+ phy-mode = "sgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ phy-handle = <&phy_port1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan4";
+ phy-handle = <&phy_port2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan5";
+ phy-handle = <&phy_port3>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan6";
+ phy-handle = <&phy_port4>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "lan7";
+ phy-handle = <&phy_port5>;
+ };
+ };
+ };
+ };
+ };
+};
+
+&srab {
+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+ status = "okay";
+ dsa,member = <0 0>;
+
+ ports {
+ port@0 {
+ label = "wan1";
+ reg = <0>;
+ };
+
+ port@1 {
+ label = "wan2";
+ reg = <1>;
+ };
+
+ sgmii0: port@4 {
+ label = "sw0";
+ reg = <4>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ sgmii1: port@5 {
+ label = "sw1";
+ reg = <5>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@8 {
+ ethernet = <&amac2>;
+ reg = <8>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65";
+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+ model = "Cisco Meraki MX65W";
+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@60000000 {
+ device_type = "memory";
+ reg = <0x60000000 0x80000000>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
` (5 preceding siblings ...)
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
` (2 more replies)
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
7 siblings, 3 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Rob Herring, Arnd Bergmann, Olof Johansson, soc, Ray Jui,
Scott Branden, bcm-kernel-feedback-list, Viresh Kumar,
Geert Uytterhoeven, Sam Ravnborg, devicetree, linux-kernel,
linux-arm-kernel
Add bindings for the Meraki MX64/MX65 series.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 78dfa315f3d0..7d184ba7d180 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -62,6 +62,12 @@ properties:
- enum:
- brcm,bcm958625hr
- brcm,bcm958625k
+ - meraki,mx64
+ - meraki,mx64-a0
+ - meraki,mx64w
+ - meraki,mx64w-a0
+ - meraki,mx65
+ - meraki,mx65w
- const: brcm,bcm58625
- const: brcm,nsp
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Rob Herring, Arnd Bergmann, Olof Johansson, soc, Ray Jui,
Scott Branden, bcm-kernel-feedback-list, Viresh Kumar,
Geert Uytterhoeven, Sam Ravnborg, devicetree, linux-kernel,
linux-arm-kernel
Add bindings for the Meraki MX64/MX65 series.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 78dfa315f3d0..7d184ba7d180 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -62,6 +62,12 @@ properties:
- enum:
- brcm,bcm958625hr
- brcm,bcm958625k
+ - meraki,mx64
+ - meraki,mx64-a0
+ - meraki,mx64w
+ - meraki,mx64w-a0
+ - meraki,mx65
+ - meraki,mx65w
- const: brcm,bcm58625
- const: brcm,nsp
--
2.26.3
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
@ 2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
2 siblings, 0 replies; 24+ messages in thread
From: Matthew Hagan @ 2021-08-06 20:44 UTC (permalink / raw)
Cc: Vladimir Oltean, Florian Fainelli, Matthew Hagan, Rob Herring,
Rob Herring, Arnd Bergmann, Olof Johansson, soc, Ray Jui,
Scott Branden, bcm-kernel-feedback-list, Viresh Kumar,
Geert Uytterhoeven, Sam Ravnborg, devicetree, linux-kernel,
linux-arm-kernel
Add bindings for the Meraki MX64/MX65 series.
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 78dfa315f3d0..7d184ba7d180 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -62,6 +62,12 @@ properties:
- enum:
- brcm,bcm958625hr
- brcm,bcm958625k
+ - meraki,mx64
+ - meraki,mx64-a0
+ - meraki,mx64w
+ - meraki,mx64w-a0
+ - meraki,mx65
+ - meraki,mx65w
- const: brcm,bcm58625
- const: brcm,nsp
--
2.26.3
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
@ 2021-08-22 19:06 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:06 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Matthew Hagan
Cc: Vladimir Oltean, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
Ray Jui, Scott Branden, Krzysztof Kozlowski, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
On Fri, 6 Aug 2021 21:44:32 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> These bindings are required for all Meraki MX64/MX65 devices. These
> common bindings include memory (2GB), PWM LEDs, AMAC, I2C (AT24), NAND
> partitions, EHCI, OHCI and pinctrl.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
@ 2021-08-22 19:07 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:07 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Matthew Hagan
Cc: Vladimir Oltean, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
Ray Jui, Scott Branden, Krzysztof Kozlowski, Viresh Kumar,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
On Fri, 6 Aug 2021 21:44:33 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> While uncommon, some Ax NSP SoCs exist in the wild. This stepping
> requires a modified secondary CPU boot-reg and removal of DMA coherency
> properties. Without these modifications, the secondary CPU will be
> inactive and many peripherals will exhibit undefined behaviour.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
@ 2021-08-22 19:07 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:07 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Matthew Hagan
Cc: Vladimir Oltean, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
Ray Jui, Scott Branden, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
On Fri, 6 Aug 2021 21:44:34 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> MX64 & MX64W Hardware info:
> - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
> - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
> - Storage: 1 GB (Micron MT29F8G08ABACA)
> - Networking: BCM58625 internal switch (5x 1GbE ports)
> - USB: 1x USB2.0
> - Serial: Internal header
> - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
>
> This patch adds the Meraki MX64 series-specific bindings. Since some
> devices make use of the older A0 SoC, changes need to be made to
> accommodate this case, including removal of coherency options and
> modification to the secondary-boot-reg.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
@ 2021-08-22 19:08 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:08 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Matthew Hagan
Cc: Vladimir Oltean, Rob Herring, Arnd Bergmann, Olof Johansson, soc,
Ray Jui, Scott Branden, Geert Uytterhoeven, Sam Ravnborg,
Viresh Kumar, devicetree, linux-kernel, linux-arm-kernel
On Fri, 6 Aug 2021 21:44:35 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> MX65 & MX65W Hardware info:
> - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
> - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
> - Storage: 1 GB (Micron MT29F8G08ABACA)
> - Networking: BCM58625 switch (2x 1GbE ports)
> 2x Qualcomm QCA8337 switches (10x 1GbE ports total)
> - PSE: Broadcom BCM59111KMLG connected to LAN ports 11 & 12
> - USB: 1x USB2.0
> - Serial: Internal header
> - WLAN(MX65W Only): 2x Broadcom BCM43520KMLG on the PCI bus.
>
> Note that a driver and firmware image for the BCM59111 PSE has been
> released under GPL, but this is not present in the kernel.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> ---
Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
@ 2021-08-22 19:11 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:11 UTC (permalink / raw)
To: bcm-kernel-feedback-list, Matthew Hagan
Cc: Vladimir Oltean, Rob Herring, Rob Herring, Arnd Bergmann,
Olof Johansson, soc, Ray Jui, Scott Branden, Viresh Kumar,
Geert Uytterhoeven, Sam Ravnborg, devicetree, linux-kernel,
linux-arm-kernel
On Fri, 6 Aug 2021 21:44:36 +0100, Matthew Hagan <mnhagan88@gmail.com> wrote:
> Add bindings for the Meraki MX64/MX65 series.
>
> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
Applied to https://github.com/Broadcom/stblinux/commits/devicetree/next, thanks!
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
@ 2021-08-22 19:11 ` Florian Fainelli
0 siblings, 0 replies; 24+ messages in thread
From: Florian Fainelli @ 2021-08-22 19:11 UTC (permalink / raw)
To: Matthew Hagan
Cc: Vladimir Oltean, Florian Fainelli, Rob Herring, Arnd Bergmann,
Olof Johansson, soc, Ray Jui, Scott Branden,
bcm-kernel-feedback-list, Sam Ravnborg, Krzysztof Kozlowski,
Geert Uytterhoeven, devicetree, linux-kernel, linux-arm-kernel
On 8/6/2021 10:44 PM, Matthew Hagan wrote:
> Changes from v2:
> - Introduce boards to Makefile in same patch as the board dts is added
> (Vladimir Oltean)
> - Use alphabetical ordering for labels (Vladimir Oltean)
> - Remove address-cells and size-cells in qca8337 switch nodes (Vladimir
> Oltean)
> - Remove "cpu" labels from switch nodes' CPU ports (Vladimir Oltean)
> - Various LED fixes, utilising dt-bindings/leds/common.h and correctly
> specifying LEDs in the form "led-N" and with the color/function/
> function-enumerator properties.
> - Fix PWM LEDs and corresponding pinctrl bindings. (Vladimir Oltean)
>
> The following changes were submitted as a separate series:
> - Introduce patches to disable QSPI by default and enable where used
> (Vladimir Oltean)
> - Move mdio@18032000 node from board related file to SoC (Vladimir
> Oltean)
> - In addition to above, relocate mdio-mux to bcm-nsp.dtsi and fix
> the resulting usb3_phy issues
>
> Changes from v3:
> - Sort labels on mx64 a0 dts files into alphabetical order as well
> - move include directives for input/input.h and leds/common.h to
> bcm958625-mx6x-common.dtsi
> - Whitespace fixes in bcm958625-mx6x-common.dtsi
> - rename "senao_nvram" partition to "nvram"
>
> Changes from v4:
> - Move chosen and memory nodes from bcm958625-mx6x-common.dtsi to
> each .dts file (Arnd Bergmann).
> - Append [@<unit-address>] to memory nodes.
> - Create Ax stepping-specific dtsi for Ax devices (Arnd Bergmann).
> - Append read-only property to at24 eeprom node.
> - Remove L2 properties which should be defined at platform-level.
> - Correct NAND node names.
I applied patch 1 first such that we don't get warnings when we apply
patches from there on during bisection builds.
--
Florian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2021-08-22 19:14 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-06 20:44 [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` [PATCH v5 1/5] ARM: dts: NSP: Add common bindings for MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190649.HmTeb43n7OCXYh5UV6JT0bVlwlMp2VMsXjgm1UTxtgI@z>
2021-08-22 19:06 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 2/5] ARM: dts: NSP: Add Ax stepping modifications Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190711.cJnZ4XoKJsnc9FibMU5flCy_ruPZUxUJGYd5yvENHN4@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 3/5] ARM: dts: NSP: Add DT files for Meraki MX64 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190734.kgi8NN-ELSJMnWNu-tp3iPc6fBGikL-RonkvdqMPxaE@z>
2021-08-22 19:07 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 4/5] ARM: dts: NSP: Add DT files for Meraki MX65 series Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822190800.mYzyBiMhvkxqZYOm1rzCJlCE-j7ifxub6k1P_ovt2yU@z>
2021-08-22 19:08 ` Florian Fainelli
2021-08-06 20:44 ` [PATCH v5 5/5] dt-bindings: arm: bcm: NSP: add Meraki MX64/MX65 Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
2021-08-06 20:44 ` Matthew Hagan
[not found] ` <20210822191100.2DfPkuhSlxXEKn5LIA2RBAoY4Xuvqy8f7-r6t3zGnBI@z>
2021-08-22 19:11 ` Florian Fainelli
[not found] ` <20210822191157.pVC3SK9g58F0tlB82DKNu_C3JMrIOCPGhoXIBuOZFPg@z>
2021-08-22 19:11 ` [PATCH v5 0/5] ARM: dts: NSP: add Meraki MX64/MX65 series Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).