soc.lore.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: [PATCH] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
       [not found]     ` <20211022043512.ojuz2eqwf5xgndph@vireshk-i7>
@ 2021-10-22 14:07       ` Rob Herring
  2021-10-22 14:07         ` Rob Herring
  0 siblings, 1 reply; 2+ messages in thread
From: Rob Herring @ 2021-10-22 14:07 UTC (permalink / raw)
  To: Viresh Kumar, SoC Team
  Cc: Viresh Kumar, Shiraz Hashim, linux-arm-kernel, devicetree, linux-kernel

On Thu, Oct 21, 2021 at 11:35 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 21-10-21, 16:12, Rob Herring wrote:
> > On Mon, Oct 4, 2021 at 1:14 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > On 28-09-21, 14:21, Rob Herring wrote:
> > > > The spear13xx PCI 'interrupt-map' property is not parse-able.
> > > > '#interrupt-cells' is missing and there are 3 #address-cells. Based on the
> > > > driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
> > > > is not needed.
> > > >
> > > > Cc: Viresh Kumar <vireshk@kernel.org>
> > > > Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
> > > > Cc: linux-arm-kernel@lists.infradead.org
> > > > Signed-off-by: Rob Herring <robh@kernel.org>
> > > > ---
> > > >  arch/arm/boot/dts/spear1310.dtsi | 6 ------
> > > >  arch/arm/boot/dts/spear1340.dtsi | 2 --
> > > >  2 files changed, 8 deletions(-)
> > > >
> > > > diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
> > > > index c4b49baf9804..2f746a9428a7 100644
> > > > --- a/arch/arm/boot/dts/spear1310.dtsi
> > > > +++ b/arch/arm/boot/dts/spear1310.dtsi
> > > > @@ -82,8 +82,6 @@ pcie0: pcie@b1000000 {
> > > >                       reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 68 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy0 1>;
> > > >                       phy-names = "pcie-phy";
> > > > @@ -101,8 +99,6 @@ pcie1: pcie@b1800000 {
> > > >                       reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 69 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 69 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy1 1>;
> > > >                       phy-names = "pcie-phy";
> > > > @@ -120,8 +116,6 @@ pcie2: pcie@b4000000 {
> > > >                       reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 70 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 70 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy2 1>;
> > > >                       phy-names = "pcie-phy";
> > > > diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
> > > > index 1a8f5e8b10e3..827e887afbda 100644
> > > > --- a/arch/arm/boot/dts/spear1340.dtsi
> > > > +++ b/arch/arm/boot/dts/spear1340.dtsi
> > > > @@ -47,8 +47,6 @@ pcie0: pcie@b1000000 {
> > > >                       reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 68 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy0 1>;
> > > >                       phy-names = "pcie-phy";
> > >
> > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Are you going to apply this?
>
> No, you or Arnd can directly apply it. I don't send pull requests for SPEAr
> anymore due to very low traffic.

Sigh. Where is this tribal knowledge documented?

soc@kernel.org should be listed in the MAINTAINERS entry if that is
the case (yes, I know they don't want to be).

Rob

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes
  2021-10-22 14:07       ` [PATCH] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes Rob Herring
@ 2021-10-22 14:07         ` Rob Herring
  0 siblings, 0 replies; 2+ messages in thread
From: Rob Herring @ 2021-10-22 14:07 UTC (permalink / raw)
  To: Viresh Kumar, SoC Team
  Cc: Viresh Kumar, Shiraz Hashim, linux-arm-kernel, devicetree, linux-kernel

On Thu, Oct 21, 2021 at 11:35 PM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 21-10-21, 16:12, Rob Herring wrote:
> > On Mon, Oct 4, 2021 at 1:14 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > On 28-09-21, 14:21, Rob Herring wrote:
> > > > The spear13xx PCI 'interrupt-map' property is not parse-able.
> > > > '#interrupt-cells' is missing and there are 3 #address-cells. Based on the
> > > > driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map'
> > > > is not needed.
> > > >
> > > > Cc: Viresh Kumar <vireshk@kernel.org>
> > > > Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
> > > > Cc: linux-arm-kernel@lists.infradead.org
> > > > Signed-off-by: Rob Herring <robh@kernel.org>
> > > > ---
> > > >  arch/arm/boot/dts/spear1310.dtsi | 6 ------
> > > >  arch/arm/boot/dts/spear1340.dtsi | 2 --
> > > >  2 files changed, 8 deletions(-)
> > > >
> > > > diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi
> > > > index c4b49baf9804..2f746a9428a7 100644
> > > > --- a/arch/arm/boot/dts/spear1310.dtsi
> > > > +++ b/arch/arm/boot/dts/spear1310.dtsi
> > > > @@ -82,8 +82,6 @@ pcie0: pcie@b1000000 {
> > > >                       reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 68 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy0 1>;
> > > >                       phy-names = "pcie-phy";
> > > > @@ -101,8 +99,6 @@ pcie1: pcie@b1800000 {
> > > >                       reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 69 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 69 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy1 1>;
> > > >                       phy-names = "pcie-phy";
> > > > @@ -120,8 +116,6 @@ pcie2: pcie@b4000000 {
> > > >                       reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 70 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 70 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy2 1>;
> > > >                       phy-names = "pcie-phy";
> > > > diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
> > > > index 1a8f5e8b10e3..827e887afbda 100644
> > > > --- a/arch/arm/boot/dts/spear1340.dtsi
> > > > +++ b/arch/arm/boot/dts/spear1340.dtsi
> > > > @@ -47,8 +47,6 @@ pcie0: pcie@b1000000 {
> > > >                       reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
> > > >                       reg-names = "dbi", "config";
> > > >                       interrupts = <0 68 0x4>;
> > > > -                     interrupt-map-mask = <0 0 0 0>;
> > > > -                     interrupt-map = <0x0 0 &gic 0 68 0x4>;
> > > >                       num-lanes = <1>;
> > > >                       phys = <&miphy0 1>;
> > > >                       phy-names = "pcie-phy";
> > >
> > > Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Are you going to apply this?
>
> No, you or Arnd can directly apply it. I don't send pull requests for SPEAr
> anymore due to very low traffic.

Sigh. Where is this tribal knowledge documented?

soc@kernel.org should be listed in the MAINTAINERS entry if that is
the case (yes, I know they don't want to be).

Rob

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2021-10-22 14:11 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20210928192143.1841497-1-robh@kernel.org>
     [not found] ` <20211004061406.tyhldt4f26zilaaw@vireshk-i7>
     [not found]   ` <CAL_JsqJzb3mOO-0_y+7zOQO6DMNLhAN99pDfuj55ooLULKb4WA@mail.gmail.com>
     [not found]     ` <20211022043512.ojuz2eqwf5xgndph@vireshk-i7>
2021-10-22 14:07       ` [PATCH] ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodes Rob Herring
2021-10-22 14:07         ` Rob Herring

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).