SOC Archive on lore.kernel.org
 help / color / Atom feed
* [GIT PULL] STM32 DT changes for v5.11 #1
@ 2020-11-27  8:54 Alexandre TORGUE
  2020-11-27 17:10 ` patchwork-bot+linux-soc
  2020-11-27 19:42 ` Arnd Bergmann
  0 siblings, 2 replies; 7+ messages in thread
From: Alexandre TORGUE @ 2020-11-27  8:54 UTC (permalink / raw)
  To: Arnd Bergmann, Olof Johansson, Kevin Hilman, SoC Team, arm-soc
  Cc: Maxime Coquelin, Marek Vasut, Ahmad Fatoum, Alexandre TORGUE

Hi ARM SoC maintainers,


Please consider this first round of STM32 DT updates for v5.11. As usual 
main changed concern MPU part. Various fixes have been done, a new board 
has been added for DH and USB type C support has been added for ST DK 
boards.

Due to company IT changes, for upstream "process" my mail address in no 
longer alexandre.torgue@st.com but alexandre.torgue@foss.st.com. Let me 
know if it causes issue for tag signature. On my side I updated GPG key 
with this new address and it seems ok.

regards
Alex

The following changes since commit f4c7fa39415da6db1fa0bc26162ac23a0fbae8bb:

   ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM (2020-11-09 
14:36:50 +0100)

are available in the Git repository at:

   git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git 
tags/stm32-dt-for-v5.11-1

for you to fetch changes up to 6660e2445523a57410de008a9b137d2c0a66e94a:

   ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles 
(2020-11-26 14:42:41 +0100)

----------------------------------------------------------------
STM32 DT updates for v5.11, round 1

Highlights:
----------

MCU part:
  -Fix dmamux reg property (length) on stm32h743.
  -Explicitly set DCMI bus type on stm32429i eval board.

MPU part:
  -Enable FIFO mode with half-full threshold for DCMI.
  -Harmonize EHCI/OHCI nodes.
  -Move SDMMC IP version to v2.0 to get features improvements.
  -Add LP-timer wakeup support.
  -Enable crypto/hash/crc support.
  -Explicitly set DCMI bus type on stm32mp157 eval board.
  -Add USB type-c controller (STUSB1600) on stm32mp15 DK boards
   (It is connected to I2C4).
  -Fix dmamux reg property (length) on stm32mp151.
  -Optimize USB OTG FIFO sizes on stm32mp151.
  -Declare tamp node also as "simple-mfd".

  -LXA:
   -Document Octavo vendor-prefixes yaml file.
   -Document lxa,stm32mp157c-mc1 in STM32 yaml file.

  -DH:
   -Connect PHY IRQ line on DH SoM.
   -Add KS8851 Ethernet support on DHCOM which is mapped to FMC2.
   -Document all DH compatible strings in STM32 yaml file.
   -Add DHCOM based PicoITX board. This board embeds ethernet port,
    USB, CAN LEDS and a custom board-to-board connector.

----------------------------------------------------------------
Ahmad Fatoum (5):
       dt-bindings: arm: stm32: add simple-mfd compatible for tamp node
       ARM: dts: stm32: support child mfd cells for the stm32mp1 TAMP syscon
       dt-bindings: vendor-prefixes: document Octavo Systems oct prefix
       dt-bindings: arm: stm32: add extra SiP compatible for 
lxa,stm32mp157c-mc1
       ARM: dts: stm32: lxa-mc1: add OSD32MP15x to list of compatibles

Amelie Delaunay (7):
       dt-bindings: connector: add typec-power-opmode property to 
usb-connector
       dt-bindings: usb: Add DT bindings for STUSB160x Type-C controller
       ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx
       ARM: dts: stm32: fix mdma1 clients channel priority level on 
stm32mp151
       ARM: dts: stm32: fix dmamux reg property on stm32mp151
       ARM: dts: stm32: fix dmamux reg property on stm32h743
       ARM: dts: stm32: adjust USB OTG gadget fifo sizes in stm32mp151

Arnaud Pouliquen (1):
       ARM: dts: stm32: update stm32mp151 for remote proc 
synchronization support

Fabrice Gasnier (2):
       ARM: dts: stm32: Add LP timer irqs on stm32mp151
       ARM: dts: stm32: Add LP timer wakeup-source on stm32mp151

Hugues Fruchet (3):
       ARM: dts: stm32: fix DCMI DMA features on stm32mp15 family
       ARM: dts: stm32: set bus-type in DCMI endpoint for 
stm32mp157c-ev1 board
       ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval 
board

Lionel Debieve (2):
       ARM: dts: stm32: enable HASH by default on stm32mp15
       ARM: dts: stm32: enable CRYP by default on stm32mp15

Marek Vasut (5):
       ARM: dts: stm32: Connect PHY IRQ line on DH STM32MP1 SoM
       ARM: dts: stm32: Add alternate pinmux for FMC EBI bus
       ARM: dts: stm32: Add KS8851 on FMC2 to STM32MP1 DHCOM
       dt-bindings: arm: stm32: Add compatible strings for DH SoMs and 
boards
       ARM: dts: stm32: Add DHCOM based PicoITX board

Nicolas Toromanoff (1):
       ARM: dts: stm32: enable CRC1 by default on stm32mp15

Patrick Delaunay (1):
       ARM: dts: stm32: reorder spi4 within stm32mp15-pinctrl

Serge Semin (1):
       ARM: dts: stm32: Harmonize EHCI/OHCI DT nodes name on stm32mp15

Yann Gautier (1):
       ARM: dts: stm32: update sdmmc IP version for STM32MP15

  .../bindings/arm/stm32/st,stm32-syscon.yaml        |   4 +
  .../devicetree/bindings/arm/stm32/stm32.yaml       |  23 +++-
  .../bindings/connector/usb-connector.yaml          |  24 ++++
  .../devicetree/bindings/usb/st,stusb160x.yaml      |  87 +++++++++++++
  .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
  arch/arm/boot/dts/Makefile                         |   1 +
  arch/arm/boot/dts/stm32429i-eval.dts               |   1 +
  arch/arm/boot/dts/stm32h743.dtsi                   |   2 +-
  arch/arm/boot/dts/stm32mp15-pinctrl.dtsi           |  90 +++++++++++--
  arch/arm/boot/dts/stm32mp151.dtsi                  |  41 ++++--
  arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts    |  35 +++++
  arch/arm/boot/dts/stm32mp157c-dk2.dts              |   4 +
  arch/arm/boot/dts/stm32mp157c-ed1.dts              |  12 ++
  arch/arm/boot/dts/stm32mp157c-ev1.dts              |   1 +
  arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts          |   2 +-
  arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi   | 143 
+++++++++++++++++++++
  arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi       |  37 ++++++
  arch/arm/boot/dts/stm32mp15xx-dkx.dtsi             |  38 ++++++
  18 files changed, 517 insertions(+), 30 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/usb/st,stusb160x.yaml
  create mode 100644 arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts
  create mode 100644 arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, back to index

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-27  8:54 [GIT PULL] STM32 DT changes for v5.11 #1 Alexandre TORGUE
2020-11-27 17:10 ` patchwork-bot+linux-soc
2020-11-27 19:42 ` Arnd Bergmann
2020-12-02 11:00   ` Alexandre TORGUE
2020-12-02 13:32     ` Arnd Bergmann
2020-12-07 16:20       ` Alexandre TORGUE
2020-12-07 16:31         ` Arnd Bergmann

SOC Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/soc/0 soc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 soc soc/ https://lore.kernel.org/soc \
		soc@kernel.org
	public-inbox-index soc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.lore.soc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git