stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Madalin Bucur <madalin.bucur@nxp.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org, Madalin Bucur <madalin.bucur@nxp.com>
Subject: [PATCH] dpaa_eth: use only online CPU portals
Date: Mon, 27 May 2019 15:24:05 +0300	[thread overview]
Message-ID: <1558959845-30758-1-git-send-email-madalin.bucur@nxp.com> (raw)

Make sure only the portals for the online CPUs are used.
Without this change, there are issues when someone boots with
maxcpus=n, with n < actual number of cores available as frames
either received or corresponding to the transmit confirmation
path would be offered for dequeue to the offline CPU portals,
getting lost.

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     | 9 ++++-----
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c | 4 ++--
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index d3f2408dc9e8..f38c3fa7d705 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -780,7 +780,7 @@ static void dpaa_eth_add_channel(u16 channel)
 	struct qman_portal *portal;
 	int cpu;
 
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		portal = qman_get_affine_portal(cpu);
 		qman_p_static_dequeue_add(portal, pool);
 	}
@@ -896,7 +896,7 @@ static void dpaa_fq_setup(struct dpaa_priv *priv,
 	u16 channels[NR_CPUS];
 	struct dpaa_fq *fq;
 
-	for_each_cpu(cpu, affine_cpus)
+	for_each_cpu_and(cpu, affine_cpus, cpu_online_mask)
 		channels[num_portals++] = qman_affine_channel(cpu);
 
 	if (num_portals == 0)
@@ -2174,7 +2174,6 @@ static int dpaa_eth_poll(struct napi_struct *napi, int budget)
 	if (cleaned < budget) {
 		napi_complete_done(napi, cleaned);
 		qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
-
 	} else if (np->down) {
 		qman_p_irqsource_add(np->p, QM_PIRQ_DQRI);
 	}
@@ -2448,7 +2447,7 @@ static void dpaa_eth_napi_enable(struct dpaa_priv *priv)
 	struct dpaa_percpu_priv *percpu_priv;
 	int i;
 
-	for_each_possible_cpu(i) {
+	for_each_online_cpu(i) {
 		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
 
 		percpu_priv->np.down = 0;
@@ -2461,7 +2460,7 @@ static void dpaa_eth_napi_disable(struct dpaa_priv *priv)
 	struct dpaa_percpu_priv *percpu_priv;
 	int i;
 
-	for_each_possible_cpu(i) {
+	for_each_online_cpu(i) {
 		percpu_priv = per_cpu_ptr(priv->percpu_priv, i);
 
 		percpu_priv->np.down = 1;
diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
index bdee441bc3b7..7ce2e99b594d 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c
@@ -569,7 +569,7 @@ static int dpaa_set_coalesce(struct net_device *dev,
 	qman_dqrr_get_ithresh(portal, &prev_thresh);
 
 	/* set new values */
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		portal = qman_get_affine_portal(cpu);
 		res = qman_portal_set_iperiod(portal, period);
 		if (res)
@@ -586,7 +586,7 @@ static int dpaa_set_coalesce(struct net_device *dev,
 
 revert_values:
 	/* restore previous values */
-	for_each_cpu(cpu, cpus) {
+	for_each_cpu_and(cpu, cpus, cpu_online_mask) {
 		if (!needs_revert[cpu])
 			continue;
 		portal = qman_get_affine_portal(cpu);
-- 
2.1.0


             reply	other threads:[~2019-05-27 12:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-27 12:24 Madalin Bucur [this message]
2019-05-28 18:20 ` [PATCH] dpaa_eth: use only online CPU portals David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1558959845-30758-1-git-send-email-madalin.bucur@nxp.com \
    --to=madalin.bucur@nxp.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).