Stable Archive on lore.kernel.org
 help / color / Atom feed
From: <gregkh@linuxfoundation.org>
To: andriy.shevchenko@linux.intel.com, malin.jonsson@ericsson.com,
	mika.westerberg@linux.intel.com, oliver.barta@aptiv.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: intel: Avoid potential glitches if pin is in GPIO" failed to apply to 4.4-stable tree
Date: Mon, 11 Nov 2019 06:59:54 +0100
Message-ID: <157345199430165@kroah.com> (raw)


The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 29c2c6aa32405dfee4a29911a51ba133edcedb0f Mon Sep 17 00:00:00 2001
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon, 14 Oct 2019 12:51:04 +0300
Subject: [PATCH] pinctrl: intel: Avoid potential glitches if pin is in GPIO
 mode

When consumer requests a pin, in order to be on the safest side,
we switch it first to GPIO mode followed by immediate transition
to the input state. Due to posted writes it's luckily to be a single
I/O transaction.

However, if firmware or boot loader already configures the pin
to the GPIO mode, user expects no glitches for the requested pin.
We may check if the pin is pre-configured and leave it as is
till the actual consumer toggles its state to avoid glitches.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Depends-on: f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip")
Cc: stable@vger.kernel.org
Cc: fei.yang@intel.com
Reported-by: Oliver Barta <oliver.barta@aptiv.com>
Reported-by: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index bc013599a9a3..83981ad66a71 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -52,6 +52,7 @@
 #define PADCFG0_GPIROUTNMI		BIT(17)
 #define PADCFG0_PMODE_SHIFT		10
 #define PADCFG0_PMODE_MASK		GENMASK(13, 10)
+#define PADCFG0_PMODE_GPIO		0
 #define PADCFG0_GPIORXDIS		BIT(9)
 #define PADCFG0_GPIOTXDIS		BIT(8)
 #define PADCFG0_GPIORXSTATE		BIT(1)
@@ -332,7 +333,7 @@ static void intel_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
 	cfg1 = readl(intel_get_padcfg(pctrl, pin, PADCFG1));
 
 	mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
-	if (!mode)
+	if (mode == PADCFG0_PMODE_GPIO)
 		seq_puts(s, "GPIO ");
 	else
 		seq_printf(s, "mode %d ", mode);
@@ -458,6 +459,11 @@ static void __intel_gpio_set_direction(void __iomem *padcfg0, bool input)
 	writel(value, padcfg0);
 }
 
+static int intel_gpio_get_gpio_mode(void __iomem *padcfg0)
+{
+	return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
+}
+
 static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
 {
 	u32 value;
@@ -491,7 +497,20 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
 	}
 
 	padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0);
+
+	/*
+	 * If pin is already configured in GPIO mode, we assume that
+	 * firmware provides correct settings. In such case we avoid
+	 * potential glitches on the pin. Otherwise, for the pin in
+	 * alternative mode, consumer has to supply respective flags.
+	 */
+	if (intel_gpio_get_gpio_mode(padcfg0) == PADCFG0_PMODE_GPIO) {
+		raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+		return 0;
+	}
+
 	intel_gpio_set_gpio_mode(padcfg0);
+
 	/* Disable TX buffer and enable RX (this will be input) */
 	__intel_gpio_set_direction(padcfg0, true);
 


                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=157345199430165@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=malin.jonsson@ericsson.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=oliver.barta@aptiv.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org
	public-inbox-index stable

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git