Stable Archive on lore.kernel.org
 help / color / Atom feed
* patch "usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer" added to usb-next
@ 2020-01-15 12:08 gregkh
  0 siblings, 0 replies; only message in thread
From: gregkh @ 2020-01-15 12:08 UTC (permalink / raw)
  To: peter.chen, balbi, gregkh, jun.li, stable


This is a note to let you know that I've just added the patch titled

    usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will also be merged in the next major kernel release
during the merge window.

If you have any questions about this process, please let me know.


From d2450c6937018d40d4111fe830fa48d4ddceb8d0 Mon Sep 17 00:00:00 2001
From: Peter Chen <peter.chen@nxp.com>
Date: Thu, 12 Dec 2019 16:35:03 +0800
Subject: usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer

The UDC core uses req->num_sgs to judge if scatter buffer list is used.
Eg: usb_gadget_map_request_by_dev. For f_fs sync io mode, the request
is re-used for each request, so if the 1st request->length > PAGE_SIZE,
and the 2nd request->length is <= PAGE_SIZE, the f_fs uses the 1st
req->num_sgs for the 2nd request, it causes the UDC core get the wrong
req->num_sgs value (The 2nd request doesn't use sg). For f_fs async
io mode, it is not harm to initialize req->num_sgs as 0 either, in case,
the UDC driver doesn't zeroed request structure.

Cc: Jun Li <jun.li@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 772a7a724f69 ("usb: gadget: f_fs: Allow scatter-gather buffers")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/f_fs.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 0bbccac94d6c..6f8b67e61771 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1062,6 +1062,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 			req->num_sgs = io_data->sgt.nents;
 		} else {
 			req->buf = data;
+			req->num_sgs = 0;
 		}
 		req->length = data_len;
 
@@ -1105,6 +1106,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 			req->num_sgs = io_data->sgt.nents;
 		} else {
 			req->buf = data;
+			req->num_sgs = 0;
 		}
 		req->length = data_len;
 
-- 
2.24.1



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-15 12:08 patch "usb: gadget: f_fs: set req->num_sgs as 0 for non-sg transfer" added to usb-next gregkh

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org
	public-inbox-index stable

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git