From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.4.232
Date: Fri, 31 Jul 2020 19:15:53 +0200 [thread overview]
Message-ID: <15962157532752@kroah.com> (raw)
I'm announcing the release of the 4.4.232 kernel.
All users of the 4.4 kernel series must upgrade.
The updated 4.4.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.4.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 4 -
arch/arm64/kernel/debug-monitors.c | 4 -
arch/parisc/include/asm/atomic.h | 2
arch/x86/kernel/fpu/signal.c | 4 -
arch/x86/math-emu/wm_sqrt.S | 2
arch/xtensa/kernel/setup.c | 3 -
arch/xtensa/kernel/xtensa_ksyms.c | 4 -
drivers/base/regmap/regmap-debugfs.c | 6 ++
drivers/base/regmap/regmap.c | 2
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 -
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c | 4 -
drivers/net/ethernet/marvell/sky2.c | 2
drivers/net/ethernet/smsc/smc91x.c | 4 -
drivers/net/hippi/rrunner.c | 2
drivers/net/phy/dp83640.c | 4 +
drivers/net/usb/ax88172a.c | 1
drivers/net/wan/lapbether.c | 9 +++
drivers/net/wan/x25_asy.c | 21 +++++---
drivers/net/wireless/ath/ath9k/hif_usb.c | 52 ++++++++++++++++-----
drivers/net/wireless/ath/ath9k/hif_usb.h | 5 ++
drivers/pinctrl/pinctrl-amd.h | 2
drivers/scsi/scsi_transport_spi.c | 2
drivers/staging/comedi/drivers/addi_apci_1032.c | 20 +++++---
drivers/staging/comedi/drivers/addi_apci_1500.c | 24 +++++++--
drivers/staging/comedi/drivers/addi_apci_1564.c | 20 +++++---
drivers/staging/comedi/drivers/ni_6527.c | 2
drivers/staging/wlan-ng/prism2usb.c | 16 ++++++
drivers/tty/serial/8250/8250_core.c | 2
drivers/tty/serial/8250/8250_mtk.c | 18 +++++++
drivers/usb/gadget/udc/gr_udc.c | 7 ++
fs/btrfs/backref.c | 1
fs/btrfs/volumes.c | 8 +++
fs/cifs/inode.c | 10 ----
fs/nfs/direct.c | 13 +----
fs/nfs/file.c | 1
fs/xfs/libxfs/xfs_bmap.c | 2
include/linux/tcp.h | 5 +-
kernel/events/core.c | 5 ++
kernel/events/uprobes.c | 2
mm/memcontrol.c | 4 -
net/ax25/af_ax25.c | 10 +++-
net/core/net-sysfs.c | 2
net/ipv4/tcp_input.c | 11 ++--
net/ipv4/tcp_output.c | 13 +++--
net/ipv4/udp.c | 2
net/ipv6/ip6_gre.c | 11 ++--
net/ipv6/udp.c | 2
net/mac80211/rx.c | 26 ++++++++++
net/rxrpc/ar-output.c | 2
net/rxrpc/ar-recvmsg.c | 2
scripts/decode_stacktrace.sh | 4 -
sound/core/info.c | 4 +
sound/soc/codecs/rt5670.h | 2
tools/perf/builtin-script.c | 24 ++++-----
tools/perf/tests/attr.c | 4 -
tools/perf/tests/pmu.c | 2
tools/perf/util/annotate.c | 14 ++++-
tools/perf/util/cgroup.c | 2
tools/perf/util/pager.c | 5 +-
tools/perf/util/parse-events.c | 4 -
tools/perf/util/pmu.c | 2
tools/perf/util/probe-event.c | 21 ++++++--
tools/perf/util/srcline.c | 16 ++++++
63 files changed, 346 insertions(+), 142 deletions(-)
Arnaldo Carvalho de Melo (1):
perf annotate: Use asprintf when formatting objdump command line
Arnd Bergmann (1):
x86: math-emu: Fix up 'cmp' insn for clang ias
Ben Skeggs (1):
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
Boris Burkov (1):
btrfs: fix mount failure caused by race with umount
Changbin Du (1):
perf: Make perf able to build with latest libbfd
Christophe JAILLET (1):
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
Dan Carpenter (1):
AX.25: Prevent integer overflows in connect and sendmsg
David Howells (1):
rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA
Eric Sandeen (1):
xfs: set format back to extents if xfs_bmap_extents_to_btree
Evgeny Novikov (1):
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
Fangrui Song (1):
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
Filipe Manana (1):
btrfs: fix double free on ulist after backref resolution failure
George Kennedy (1):
ax88172a: fix ax88172a_unbind() failures
Greg Kroah-Hartman (1):
Linux 4.4.232
Hans de Goede (1):
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
Hugh Dickins (1):
mm/memcg: fix refcount error while moving and swapping
Ian Abbott (4):
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
Jacky Hu (1):
pinctrl: amd: fix npins for uart0 in kerncz_groups
Jiri Olsa (2):
perf/core: Fix locking for children siblings group read
perf tools: Fix snprint warnings for gcc 8
John David Anglin (1):
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
Marc Kleine-Budde (1):
regmap: dev_get_regmap_match(): fix string comparison
Mark O'Donovan (1):
ath9k: Fix regression with Atheros 9271
Markus Theil (1):
mac80211: allow rx of mesh eapol frames with default rx key
Masami Hiramatsu (1):
perf probe: Fix to check blacklist address correctly
Max Filippov (2):
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
xtensa: update *pos in cpuinfo_op.next
Miaohe Lin (1):
net: udp: Fix wrong clean up for IS_UDPLITE macro
Oleg Nesterov (1):
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
Olga Kornievskaia (1):
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
Peilin Ye (2):
AX.25: Fix out-of-bounds read in ax25_connect()
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
Peng Fan (1):
regmap: debugfs: check count when read regmap file
Pi-Hsun Shih (1):
scripts/decode_stacktrace: strip basepath from all paths
Qiujun Huang (1):
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
Rustam Kovhaev (1):
staging: wlan-ng: properly check endpoint types
Sebastian Andrzej Siewior (1):
x86/fpu: Disable bottom halves while loading FPU registers
Serge Semin (1):
serial: 8250_mtk: Fix high-speed baud rates clamping
Sergey Organov (1):
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
Sergey Senozhatsky (1):
tools/lib/subcmd/pager.c: do not alias select() params
Steve French (1):
Revert "cifs: Fix the target file was deleted when rename failed."
Takashi Iwai (1):
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
Tom Rix (2):
scsi: scsi_transport_spi: Fix function pointer check
net: sky2: initialize return of gm_phy_read
Wang Hai (1):
net: smc91x: Fix possible memory leak in smc_drv_probe()
Wei Yongjun (1):
ip6_gre: fix null-ptr-deref in ip6gre_init_net()
Will Deacon (1):
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
Xie He (2):
drivers/net/wan/lapbether: Fixed the value of hard_header_len
drivers/net/wan/x25_asy: Fix to make it work
Xiongfeng Wang (1):
net-sysfs: add a newline when printing 'tx_timeout' by sysfs
Yang Yingliang (1):
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
Yuchung Cheng (1):
tcp: allow at most one TLP probe per flight
next reply other threads:[~2020-07-31 17:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-31 17:15 Greg Kroah-Hartman [this message]
2020-07-31 17:15 ` Linux 4.4.232 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15962157532752@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).