stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <Alexander.Levin@microsoft.com>
To: "stable@vger.kernel.org" <stable@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Jacob Keller <jacob.e.keller@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
	Sasha Levin <Alexander.Levin@microsoft.com>
Subject: [PATCH AUTOSEL for 3.18 029/101] ixgbe: avoid permanent lock of *_PTP_TX_IN_PROGRESS
Date: Mon, 9 Apr 2018 00:35:38 +0000	[thread overview]
Message-ID: <20180409003505.164715-29-alexander.levin@microsoft.com> (raw)
In-Reply-To: <20180409003505.164715-1-alexander.levin@microsoft.com>

From: Jacob Keller <jacob.e.keller@intel.com>

[ Upstream commit 5fef124d9c75942dc5c2445a3faa8ad37cbf4c82 ]

The ixgbe driver uses a state bit lock to avoid handling more than one Tx
timestamp request at once. This is required because hardware is limited
to a single set of registers for Tx timestamps.

The state bit lock is not properly cleaned up during
ixgbe_xmit_frame_ring() if the transmit fails such as due to DMA or TSO
failure. In some hardware this results in blocking timestamps until the
service task times out. In other hardware this results in a permanent
lock of the timestamp bit because we never receive an interrupt
indicating the timestamp occurred, since indeed the packet was never
transmitted.

Fix this by checking for DMA and TSO errors in ixgbe_xmit_frame_ring() and
properly cleaning up after ourselves when these occur.

Reported-by: Reported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index b250aa806d07..95fab2867b31 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6776,9 +6776,9 @@ static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
 #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \
 		       IXGBE_TXD_CMD_RS)
 
-static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
-			 struct ixgbe_tx_buffer *first,
-			 const u8 hdr_len)
+static int ixgbe_tx_map(struct ixgbe_ring *tx_ring,
+			struct ixgbe_tx_buffer *first,
+			const u8 hdr_len)
 {
 	struct sk_buff *skb = first->skb;
 	struct ixgbe_tx_buffer *tx_buffer;
@@ -6901,7 +6901,7 @@ static void ixgbe_tx_map(struct ixgbe_ring *tx_ring,
 		ixgbe_write_tail(tx_ring, i);
 	}
 
-	return;
+	return 0;
 dma_error:
 	dev_err(tx_ring->dev, "TX DMA map failed\n");
 
@@ -6917,6 +6917,8 @@ dma_error:
 	}
 
 	tx_ring->next_to_use = i;
+
+	return -1;
 }
 
 static void ixgbe_atr(struct ixgbe_ring *ring,
@@ -7174,13 +7176,21 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 #ifdef IXGBE_FCOE
 xmit_fcoe:
 #endif /* IXGBE_FCOE */
-	ixgbe_tx_map(tx_ring, first, hdr_len);
+	if (ixgbe_tx_map(tx_ring, first, hdr_len))
+		goto cleanup_tx_timestamp;
 
 	return NETDEV_TX_OK;
 
 out_drop:
 	dev_kfree_skb_any(first->skb);
 	first->skb = NULL;
+cleanup_tx_timestamp:
+	if (unlikely(tx_flags & IXGBE_TX_FLAGS_TSTAMP)) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+		cancel_work_sync(&adapter->ptp_tx_work);
+		clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
+	}
 
 	return NETDEV_TX_OK;
 }
-- 
2.15.1

  parent reply	other threads:[~2018-04-09  0:39 UTC|newest]

Thread overview: 52+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-09  0:35 [PATCH AUTOSEL for 3.18 001/101] ALSA: timer: Wrap with spinlock for queue access Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 002/101] e1000e: Undo e1000e_pm_freeze if __e1000_shutdown fails Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 003/101] perf/core: Correct event creation with PERF_FORMAT_GROUP Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 004/101] MIPS: mm: fixed mappings: correct initialisation Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 005/101] MIPS: kprobes: flush_insn_slot should flush only if probe initialised Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 006/101] net: emac: fix reset timeout with AR8035 phy Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 007/101] perf tests: Decompress kernel module before objdump Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 008/101] xen: avoid type warning in xchg_xen_ulong Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 009/101] KEYS: put keyring if install_session_keyring_to_cred() fails Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 010/101] bnx2x: Allow vfs to disable txvlan offload Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 011/101] sctp: fix recursive locking warning in sctp_do_peeloff Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 012/101] sparc64: ldc abort during vds iso boot Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 013/101] iio: magnetometer: st_magn_spi: fix spi_device_id table Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 014/101] Bluetooth: Send HCI Set Event Mask Page 2 command only when needed Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 015/101] ACPICA: Events: Add runtime stub support for event APIs Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 016/101] ACPICA: Disassembler: Abort on an invalid/unknown AML opcode Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 017/101] s390/dasd: Display read-only attribute correctly Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 018/101] vxlan: dont migrate permanent fdb entries during learn Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 019/101] scsi: csiostor: Avoid content leaks and casts Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 020/101] scsi: megaraid: Fix a sleep-in-atomic bug Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 021/101] scsi: lpfc: Fix return value of board_mode store routine in case of online failure Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 022/101] usb: usbip tool: Check the return of get_nports() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 023/101] usb: usbip tool: Fix refresh_imported_device_list() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 024/101] PCI: Correct PCI_STD_RESOURCE_END usage Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 025/101] PCI: Add domain number check to find_smbios_instance_string() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 026/101] mtd: handle partitioning on devices with 0 erasesize Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 027/101] platform/x86: acer-wmi: Detect RF Button capability Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 028/101] caif: Add sockaddr length check before accessing sa_family in connect handler Sasha Levin
2018-04-09  0:35 ` Sasha Levin [this message]
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 030/101] net_sched: move tcf_lock down after gen_replace_estimator() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 031/101] PCI: Protect pci_error_handlers->reset_notify() usage with device_lock() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 032/101] firmware: dmi_scan: Check DMI structure length Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 033/101] i2c: ismt: fix wrong device address when unmap the data buffer Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 034/101] drm/mgag200: Fix to always set HiPri for G200e4 V2 Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 035/101] r8152: add byte_enable for ocp_read_word function Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 036/101] Btrfs: skip commit transaction if we don't have enough pinned bytes Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 037/101] scsi: lpfc: Fix crash after firmware flash when IO is running Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 038/101] mmc: sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 039/101] x86/nmi: Fix timeout test in test_nmi_ipi() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 040/101] arm64: pass machine size to sparse Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 041/101] fib_rules: Resolve goto rules target on delete Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 042/101] dccp: call inet_add_protocol after register_pernet_subsys in dccp_v4_init Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 043/101] arm64: ptrace: Fix VFP register dumping in compat coredumps Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 044/101] veth: Be more robust on network device creation when no attributes Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 045/101] macvlan: Do not return error when setting the same mac address Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 046/101] sctp: adjust ssthresh when transport is idle Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 047/101] arm64: pass endianness info to sparse Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 048/101] scsi: bnx2i: missing error code in bnx2i_ep_connect() Sasha Levin
2018-04-09  0:35 ` [PATCH AUTOSEL for 3.18 049/101] powerpc: Fix /proc/cpuinfo revision for POWER9 DD2 Sasha Levin
2018-04-09  0:36 ` [PATCH AUTOSEL for 3.18 050/101] ACPI: EC: Fix EC command visibility for dynamic debug Sasha Levin
2018-04-09  0:36 ` [PATCH AUTOSEL for 3.18 051/101] scsi: sun_esp: fix device reference leaks Sasha Levin
2018-04-09  0:41 ` [PATCH AUTOSEL for 3.18 052/101] powerpc/fadump: avoid duplicates in crash memory ranges Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180409003505.164715-29-alexander.levin@microsoft.com \
    --to=alexander.levin@microsoft.com \
    --cc=jacob.e.keller@intel.com \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).