From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Martin Blumenstingl , Kevin Hilman , Sasha Levin Subject: [PATCH 4.16 046/279] ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller Date: Mon, 18 Jun 2018 10:10:31 +0200 Message-Id: <20180618080610.715406910@linuxfoundation.org> In-Reply-To: <20180618080608.851973560@linuxfoundation.org> References: <20180618080608.851973560@linuxfoundation.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: 4.16-stable review patch. If anyone has any objections, please let me know. ------------------ From: Martin Blumenstingl [ Upstream commit b83687f359d9b4128073f06ab7a06489eb04aa7c ] The LibreTech CC ("Le Potato") board provides four USB connectors. These are provided by a hub which is connected to the SoC's USB controller. Enable the SoC's USB controller to make the USB ports usable. Also turn on the HDMI_5V regulator when powering on the PHY because (even though it's not shown in the schematics) HDMI_5V also supplies the USB VBUS. Signed-off-by: Martin Blumenstingl Signed-off-by: Kevin Hilman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 12 +++++++++++ 1 file changed, 12 insertions(+) --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -271,3 +271,15 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; + +&usb2_phy0 { + /* + * even though the schematics don't show it: + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +};