From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Evan Green <evgreen@chromium.org>,
Stable@vger.kernel.org,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Sasha Levin <sashal@kernel.org>,
linux-iio@vger.kernel.org
Subject: [PATCH AUTOSEL 4.20 069/117] iio: adc: qcom-spmi-adc5: Initialize prescale properly
Date: Tue, 8 Jan 2019 14:25:37 -0500 [thread overview]
Message-ID: <20190108192628.121270-69-sashal@kernel.org> (raw)
In-Reply-To: <20190108192628.121270-1-sashal@kernel.org>
From: Evan Green <evgreen@chromium.org>
[ Upstream commit db23d88756abd38e0995ea8449d0025b3de4b26b ]
adc5_get_dt_data uses a local, prop, feeds it to adc5_get_dt_channel_data,
and then puts the result into adc->chan_props. The problem is
adc5_get_dt_channel_data may not initialize that structure fully, so a
garbage value is used for prescale if the optional "qcom,pre-scaling" is
not defined in DT. adc5_read_raw then uses this as an array index,
generating a crash that looks like this:
[ 6.683186] Unable to handle kernel paging request at virtual address ffffff90e78c7964
Call trace:
qcom_vadc_scale_code_voltage_factor+0x74/0x104
qcom_vadc_scale_hw_calib_die_temp+0x20/0x60
qcom_adc5_hw_scale+0x78/0xa4
adc5_read_raw+0x3d0/0x65c
iio_channel_read+0x240/0x30c
iio_read_channel_processed+0x10c/0x150
qpnp_tm_get_temp+0xc0/0x40c
of_thermal_get_temp+0x7c/0x98
thermal_zone_get_temp+0xac/0xd8
thermal_zone_device_update+0xc0/0x38c
qpnp_tm_probe+0x624/0x81c
platform_drv_probe+0xe4/0x11c
really_probe+0x188/0x3fc
driver_probe_device+0xb8/0x188
__device_attach_driver+0x114/0x180
bus_for_each_drv+0xd8/0x118
__device_attach+0x180/0x27c
device_initial_probe+0x20/0x2c
bus_probe_device+0x78/0x124
deferred_probe_work_func+0xfc/0x138
process_one_work+0x3d8/0x8b0
process_scheduled_works+0x48/0x6c
worker_thread+0x488/0x7cc
kthread+0x24c/0x264
ret_from_fork+0x10/0x18
Unfortunately, when I went to add the initializer for this and tried to
boot it, my machine shut down immediately, complaining that it was
hotter than the sun. It appears that adc5_chans_pmic and adc5_chans_rev2
were initializing prescale_index as if it were directly a divisor,
rather than the index into adc5_prescale_ratios that it is.
Fix the uninitialized value, and change the static initialization to use
indices into adc5_prescale_ratios.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/iio/adc/qcom-spmi-adc5.c | 58 +++++++++++++++++---------------
1 file changed, 31 insertions(+), 27 deletions(-)
diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index f9af6b082916..6a866cc187f7 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -423,6 +423,7 @@ struct adc5_channels {
enum vadc_scale_fn_type scale_fn_type;
};
+/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */
#define ADC5_CHAN(_dname, _type, _mask, _pre, _scale) \
{ \
.datasheet_name = _dname, \
@@ -443,63 +444,63 @@ struct adc5_channels {
_pre, _scale) \
static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
- [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 1,
+ [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 1,
+ [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 3,
+ [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 3,
+ [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 1,
+ [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0,
SCALE_HW_CALIB_PMIC_THERM)
- [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 1,
+ [ADC5_USB_IN_I] = ADC5_CHAN_VOLT("usb_in_i_uv", 0,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_USB_IN_V_16] = ADC5_CHAN_VOLT("usb_in_v_div_16", 16,
+ [ADC5_USB_IN_V_16] = ADC5_CHAN_VOLT("usb_in_v_div_16", 8,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_CHG_TEMP] = ADC5_CHAN_TEMP("chg_temp", 1,
+ [ADC5_CHG_TEMP] = ADC5_CHAN_TEMP("chg_temp", 0,
SCALE_HW_CALIB_PM5_CHG_TEMP)
/* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */
- [ADC5_SBUx] = ADC5_CHAN_VOLT("chg_sbux", 3,
+ [ADC5_SBUx] = ADC5_CHAN_VOLT("chg_sbux", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_MID_CHG_DIV6] = ADC5_CHAN_VOLT("chg_mid_chg", 6,
+ [ADC5_MID_CHG_DIV6] = ADC5_CHAN_VOLT("chg_mid_chg", 3,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm", 1,
+ [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm", 0,
SCALE_HW_CALIB_XOTHERM)
- [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
+ [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
+ [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
+ [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 1,
+ [ADC5_AMUX_THM2] = ADC5_CHAN_TEMP("amux_thm2", 0,
SCALE_HW_CALIB_PM5_SMB_TEMP)
};
static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
- [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 1,
+ [ADC5_REF_GND] = ADC5_CHAN_VOLT("ref_gnd", 0,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 1,
+ [ADC5_1P25VREF] = ADC5_CHAN_VOLT("vref_1p25", 0,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 3,
+ [ADC5_VPH_PWR] = ADC5_CHAN_VOLT("vph_pwr", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 3,
+ [ADC5_VBAT_SNS] = ADC5_CHAN_VOLT("vbat_sns", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 3,
+ [ADC5_VCOIN] = ADC5_CHAN_VOLT("vcoin", 1,
SCALE_HW_CALIB_DEFAULT)
- [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 1,
+ [ADC5_DIE_TEMP] = ADC5_CHAN_TEMP("die_temp", 0,
SCALE_HW_CALIB_PMIC_THERM)
- [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 1,
+ [ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 1,
+ [ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 1,
+ [ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 1,
+ [ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 1,
+ [ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
- [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 1,
+ [ADC5_XO_THERM_100K_PU] = ADC5_CHAN_TEMP("xo_therm_100k_pu", 0,
SCALE_HW_CALIB_THERM_100K_PULLUP)
};
@@ -558,6 +559,9 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
return ret;
}
prop->prescale = ret;
+ } else {
+ prop->prescale =
+ adc->data->adc_chans[prop->channel].prescale_index;
}
ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
--
2.19.1
next prev parent reply other threads:[~2019-01-08 20:04 UTC|newest]
Thread overview: 135+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-08 19:24 [PATCH AUTOSEL 4.20 001/117] netfilter: ipset: Allow matching on destination MAC address for mac and ipmac sets Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 002/117] gpio: pl061: Move irq_chip definition inside struct pl061 Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 003/117] ASoC: wm97xx: fix uninitialized regmap pointer problem Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 004/117] drm/amd/display: Guard against null stream_state in set_crc_source Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 005/117] drm/amdkfd: fix interrupt spin lock Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 006/117] qtnfmac: fix error handling in control path Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 007/117] ixgbe: allow IPsec Tx offload in VEPA mode Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 008/117] platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey Sasha Levin
2019-01-09 0:49 ` João Paulo Rechi Vita
2019-01-23 13:55 ` Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 009/117] e1000e: allow non-monotonic SYSTIM readings Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 010/117] usb: typec: tcpm: Do not disconnect link for self powered devices Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 011/117] selftests/bpf: enable (uncomment) all tests in test_libbpf.sh Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 012/117] of: overlay: add missing of_node_put() after add new node to changeset Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 013/117] writeback: don't decrement wb->refcnt if !wb->bdi Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 014/117] serial: set suppress_bind_attrs flag only if builtin Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 015/117] bpf: Allow narrow loads with offset > 0 Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 016/117] fanotify: return only user requested event types in event mask Sasha Levin
2019-01-09 6:50 ` Amir Goldstein
2019-01-09 11:32 ` Jan Kara
2019-01-23 13:56 ` Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 017/117] ALSA: oxfw: add support for APOGEE duet FireWire Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 018/117] x86/mce: Fix -Wmissing-prototypes warnings Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 019/117] MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 020/117] crypto: ecc - regularize scalar for scalar multiplication Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 021/117] drm/scheduler: Fix bad job be re-processed in TDR Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 022/117] arm64: perf: set suppress_bind_attrs flag to true Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 023/117] MIPS: Loongson: Add Loongson-3A R2.1 basic support Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 024/117] x86/fault: Don't try to recover from an implicit supervisor access Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 025/117] USB: serial: ftdi_sio: use rounding when calculating baud rate divisors Sasha Levin
2019-01-09 8:24 ` Johan Hovold
2019-01-23 13:58 ` Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 026/117] drm/atomic-helper: Complete fake_commit->flip_done potentially earlier Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 027/117] clk: meson: meson8b: add support for more M/N values in sys_pll Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 028/117] clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 029/117] samples: bpf: fix: error handling regarding kprobe_events Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 030/117] usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device Sasha Levin
2019-01-08 19:24 ` [PATCH AUTOSEL 4.20 031/117] fpga: altera-cvp: fix probing for multiple FPGAs on the bus Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 032/117] selinux: always allow mounting submounts Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 033/117] arm64: Use a raw spinlock in __install_bp_hardening_cb() Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 034/117] drm/amdgpu: Correct get_crtc_scanoutpos behavior when vpos >= vtotal Sasha Levin
2019-01-09 9:20 ` Michel Dänzer
2019-01-23 14:03 ` Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 035/117] block: use rcu_work instead of call_rcu to avoid sleep in softirq Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 036/117] ASoC: pcm3168a: Don't disable pcm3168a when CONFIG_PM defined Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 037/117] scsi: qedi: Check for session online before getting iSCSI TLV data Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 038/117] net: ethernet: ave: Set initial wol state to disabled Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 039/117] drm/amdgpu: Reorder uvd ring init before uvd resume Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 040/117] rxe: IB_WR_REG_MR does not capture MR's iova field Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 041/117] efi/libstub: Disable some warnings for x86{,_64} Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 042/117] jffs2: Fix use of uninitialized delayed_work, lockdep breakage Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 043/117] kbuild: let fixdep directly write to .*.cmd files Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 044/117] clk: imx: make mux parent strings const Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 045/117] pstore/ram: Do not treat empty buffers as valid Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 046/117] media: uvcvideo: Refactor teardown of uvc on USB disconnect Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 047/117] powerpc/xmon: Fix invocation inside lock region Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 048/117] powerpc/pseries/cpuidle: Fix preempt warning Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 049/117] arm64: relocatable: fix inconsistencies in linker script and options Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 050/117] media: firewire: Fix app_info parameter type in avc_ca{,_app}_info Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 051/117] ASoC: use dma_ops of parent device for acp_audio_dma Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 052/117] coresight: tmc: Fix bad register address for CLAIM Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 053/117] IB/hfi1: Incorrect sizing of sge for PIO will OOPs Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 054/117] media: venus: core: Set dma maximum segment size Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 055/117] staging: erofs: fix use-after-free of on-stack `z_erofs_vle_unzip_io' Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 056/117] media: cedrus: don't initialize pointers with zero Sasha Levin
2019-01-09 8:48 ` Dan Carpenter
2019-01-23 14:04 ` Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 057/117] net: call sk_dst_reset when set SO_DONTROUTE Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 058/117] scsi: target: use consistent left-aligned ASCII INQUIRY data Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 059/117] scsi: target/core: Make sure that target_wait_for_sess_cmds() waits long enough Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 060/117] selftests: do not macro-expand failed assertion expressions Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 061/117] arm64: kasan: Increase stack size for KASAN_EXTRA Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 062/117] clk: imx6q: reset exclusive gates on init Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 063/117] arm64: Fix minor issues with the dcache_by_line_op macro Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 064/117] bpf: relax verifier restriction on BPF_MOV | BPF_ALU Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 065/117] usb: dwc2: Fix disable all EP's on disconnect Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 066/117] x86/resctrl: Fix rdt_find_domain() return value and checks Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 067/117] kconfig: fix file name and line number of warn_ignored_character() Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 068/117] kconfig: fix memory leak when EOF is encountered in quotation Sasha Levin
2019-01-08 19:25 ` Sasha Levin [this message]
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 070/117] mmc: atmel-mci: do not assume idle after atmci_request_end Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 071/117] btrfs: volumes: Make sure there is no overlap of dev extents at mount time Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 072/117] btrfs: alloc_chunk: fix more DUP stripe size handling Sasha Levin
2019-01-08 23:52 ` Hans van Kranenburg
2019-01-23 14:37 ` Sasha Levin
2019-01-23 15:54 ` Hans van Kranenburg
2019-01-23 17:41 ` David Sterba
2019-01-23 18:18 ` Sasha Levin
2019-01-23 19:32 ` Hans van Kranenburg
2019-11-19 15:23 ` Ben Hutchings
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 073/117] btrfs: fix use-after-free due to race between replace start and cancel Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 074/117] Btrfs: fix deadlock when enabling quotas due to concurrent snapshot creation Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 075/117] Btrfs: fix access to available allocation bits when starting balance Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 076/117] btrfs: improve error handling of btrfs_add_link Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 077/117] tty/serial: do not free trasnmit buffer page under port lock Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 078/117] tools lib traceevent: Fix compile warnings in tools/lib/traceevent/event-parse.c Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 079/117] perf intel-pt: Fix error with config term "pt=0" Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 080/117] perf tests ARM: Disable breakpoint tests 32-bit Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 081/117] perf svghelper: Fix unchecked usage of strncpy() Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 082/117] perf parse-events: " Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 083/117] perf vendor events intel: Fix Load_Miss_Real_Latency on SKL/SKX Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 084/117] netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 085/117] netfilter: ipt_CLUSTERIP: remove wrong WARN_ON_ONCE in netns exit routine Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 086/117] netfilter: ipt_CLUSTERIP: fix deadlock " Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 087/117] x86/topology: Use total_cpus for max logical packages calculation Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 088/117] dm crypt: use u64 instead of sector_t to store iv_offset Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 089/117] dm kcopyd: Fix bug causing workqueue stalls Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 090/117] perf stat: Avoid segfaults caused by negated options Sasha Levin
2019-01-08 19:25 ` [PATCH AUTOSEL 4.20 091/117] tools lib subcmd: Don't add the kernel sources to the include path Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 092/117] dm snapshot: Fix excessive memory usage and workqueue stalls Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 093/117] perf cs-etm: Correct packets swapping in cs_etm__flush() Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 094/117] perf tools: Add missing sigqueue() prototype for systems lacking it Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 095/117] perf tools: Add missing open_memstream() " Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 096/117] quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 097/117] clocksource/drivers/integrator-ap: Add missing of_node_put() Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 098/117] dm: Check for device sector overflow if CONFIG_LBDAF is not set Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 099/117] Bluetooth: btusb: Add support for Intel bluetooth device 8087:0029 Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 100/117] ALSA: bebob: fix model-id of unit for Apogee Ensemble Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 101/117] sysfs: Disable lockdep for driver bind/unbind files Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 102/117] IB/usnic: Fix potential deadlock Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 103/117] scsi: mpt3sas: fix memory ordering on 64bit writes Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 104/117] scsi: smartpqi: correct lun reset issues Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 105/117] ath10k: fix peer stats null pointer dereference Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 106/117] scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 107/117] KVM: PPC: Book3S HV: Align gfn to L1 page size when inserting nest-rmap entry Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 108/117] KVM: PPC: Book3S HV: Apply combination of host and l1 pte rc for nested guest Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 109/117] scsi: megaraid: fix out-of-bound array accesses Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 110/117] iomap: don't search past page end in iomap_is_partially_uptodate Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 111/117] bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 112/117] ocfs2: fix panic due to unrecovered local alloc Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 113/117] mm/page-writeback.c: don't break integrity writeback on ->writepage() error Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 114/117] mm/swap: use nr_node_ids for avail_lists in swap_info_struct Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 115/117] userfaultfd: clear flag if remap event not enabled Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 116/117] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps Sasha Levin
2019-01-08 19:26 ` [PATCH AUTOSEL 4.20 117/117] mm/memblock.c: skip kmemleak for kasan_init() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190108192628.121270-69-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=evgreen@chromium.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).