From: Gao Xiang <gaoxiang25@huawei.com>
To: Chao Yu <yuchao0@huawei.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<devel@driverdev.osuosl.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
<linux-erofs@lists.ozlabs.org>, "Chao Yu" <chao@kernel.org>,
Miao Xie <miaoxie@huawei.com>, <weidu.du@huawei.com>,
Fang Wei <fangwei1@huawei.com>, Gao Xiang <gaoxiang25@huawei.com>,
<stable@vger.kernel.org>
Subject: [PATCH 1/3] staging: erofs: fix error handling when failed to read compresssed data
Date: Tue, 19 Mar 2019 21:54:59 +0800 [thread overview]
Message-ID: <20190319135501.28712-1-gaoxiang25@huawei.com> (raw)
Complete read error handling paths for all three kinds of
compressed pages:
1) For cache-managed pages, PG_uptodate will be checked since
read_endio will unlock and SetPageUptodate for these pages;
2) For inplaced pages, read_endio cannot SetPageUptodate directly
since it should be used to mark the final decompressed data,
PG_error will be set with page locked for IO error instead;
3) For staging pages, PG_error is used, which is similar to
what we do for inplaced pages.
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
---
This series focus on fixing error handling when failed to read
compresssed data due to previous incomplete paths.
In addition, the last 2 patches add IO error fault injection
for reading paths, which I have used to test the first patch as well.
Thanks,
Gao Xiang
drivers/staging/erofs/unzip_vle.c | 41 ++++++++++++++++++++++++++-------------
1 file changed, 28 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/erofs/unzip_vle.c b/drivers/staging/erofs/unzip_vle.c
index 8715bc50e09c..3416d3f10324 100644
--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -972,6 +972,7 @@ static int z_erofs_vle_unzip(struct super_block *sb,
overlapped = false;
compressed_pages = grp->compressed_pages;
+ err = 0;
for (i = 0; i < clusterpages; ++i) {
unsigned int pagenr;
@@ -981,26 +982,39 @@ static int z_erofs_vle_unzip(struct super_block *sb,
DBG_BUGON(!page);
DBG_BUGON(!page->mapping);
- if (z_erofs_is_stagingpage(page))
- continue;
+ if (!z_erofs_is_stagingpage(page)) {
#ifdef EROFS_FS_HAS_MANAGED_CACHE
- if (page->mapping == MNGD_MAPPING(sbi)) {
- DBG_BUGON(!PageUptodate(page));
- continue;
- }
+ if (page->mapping == MNGD_MAPPING(sbi)) {
+ if (unlikely(!PageUptodate(page)))
+ err = -EIO;
+ continue;
+ }
#endif
- /* only non-head page could be reused as a compressed page */
- pagenr = z_erofs_onlinepage_index(page);
+ /*
+ * only if non-head page can be selected
+ * for inplace decompression
+ */
+ pagenr = z_erofs_onlinepage_index(page);
- DBG_BUGON(pagenr >= nr_pages);
- DBG_BUGON(pages[pagenr]);
- ++sparsemem_pages;
- pages[pagenr] = page;
+ DBG_BUGON(pagenr >= nr_pages);
+ DBG_BUGON(pages[pagenr]);
+ ++sparsemem_pages;
+ pages[pagenr] = page;
+
+ overlapped = true;
+ }
- overlapped = true;
+ /* PG_error needs checking for inplaced and staging pages */
+ if (unlikely(PageError(page))) {
+ DBG_BUGON(PageUptodate(page));
+ err = -EIO;
+ }
}
+ if (unlikely(err))
+ goto out;
+
llen = (nr_pages << PAGE_SHIFT) - work->pageofs;
if (z_erofs_vle_workgrp_fmt(grp) == Z_EROFS_VLE_WORKGRP_FMT_PLAIN) {
@@ -1194,6 +1208,7 @@ pickup_page_for_submission(struct z_erofs_vle_workgroup *grp,
if (page->mapping == mc) {
WRITE_ONCE(grp->compressed_pages[nr], page);
+ ClearPageError(page);
if (!PagePrivate(page)) {
/*
* impossible to be !PagePrivate(page) for
--
2.12.2
next reply other threads:[~2019-03-19 13:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-19 13:54 Gao Xiang [this message]
2019-03-22 3:25 ` [PATCH 1/3] staging: erofs: fix error handling when failed to read compresssed data Gao Xiang
2019-03-25 2:05 ` Chao Yu
2019-03-25 2:08 ` Gao Xiang
[not found] ` <20190325003840.2176F2133F@mail.kernel.org>
2019-03-25 1:27 ` Gao Xiang
2019-03-25 1:45 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319135501.28712-1-gaoxiang25@huawei.com \
--to=gaoxiang25@huawei.com \
--cc=chao@kernel.org \
--cc=devel@driverdev.osuosl.org \
--cc=fangwei1@huawei.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-erofs@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miaoxie@huawei.com \
--cc=stable@vger.kernel.org \
--cc=weidu.du@huawei.com \
--cc=yuchao0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).