Stable Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 5.3 000/148] 5.3.6-stable review
@ 2019-10-10  8:34 Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 001/148] s390/process: avoid potential reading of freed stack Greg Kroah-Hartman
                   ` (152 more replies)
  0 siblings, 153 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

This is the start of the stable review cycle for the 5.3.6 release.
There are 148 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.3.6-rc1

Dave Jiang <dave.jiang@intel.com>
    libnvdimm: prevent nvdimm from requesting key when security is disabled

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: detect potential multiref due to corrupted images

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: avoid endless loop of invalid lookback distance 0

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: add two missing erofs_workgroup_put for corrupted images

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: some compressed cluster should be submitted for corrupted images

Gao Xiang <gaoxiang25@huawei.com>
    staging: erofs: fix an error handling in erofs_readdir()

Andrew Murray <andrew.murray@arm.com>
    coresight: etm4x: Use explicit barriers on enable/disable

Eric Sandeen <sandeen@redhat.com>
    vfs: Fix EOVERFLOW testing in put_compat_statfs64

Vincent Chen <vincent.chen@sifive.com>
    riscv: Avoid interrupts being erroneously enabled in handle_exception()

Srikar Dronamraju <srikar@linux.vnet.ibm.com>
    perf stat: Reset previous counts on repeat with interval

Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
    tick: broadcast-hrtimer: Fix a race in bc_set_next

Sean Christopherson <sean.j.christopherson@intel.com>
    KVM: nVMX: Fix consistency check on injected exception error code

Filipe Manana <fdmanana@suse.com>
    Btrfs: fix selftests failure due to uninitialized i_mode in test inodes

Hans de Goede <hdegoede@redhat.com>
    drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed

Navid Emamdoost <navid.emamdoost@gmail.com>
    nfp: abm: fix memory leak in nfp_abm_u32_knode_replace

Danielle Ratson <danieller@mellanox.com>
    mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf unwind: Fix libunwind build failure on i386 systems

Lee Jones <lee.jones@linaro.org>
    i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630

Marek Vasut <marex@denx.de>
    net: dsa: microchip: Always set regmap stride to 1

Allan Zhang <allanzhang@google.com>
    bpf: Fix bpf_event_output re-entry issue

Ming Lei <ming.lei@redhat.com>
    blk-mq: move lockdep_assert_held() into elevator_exit

Andrii Nakryiko <andriin@fb.com>
    libbpf: fix false uninitialized variable warning

Valdis Kletnieks <valdis.kletnieks@vt.edu>
    kernel/elfcore.c: include proper prototypes

Andrii Nakryiko <andriin@fb.com>
    selftests/bpf: adjust strobemeta loop to satisfy latest clang

Qian Cai <cai@lca.pw>
    include/trace/events/writeback.h: fix -Wstringop-truncation warnings

Thomas Richter <tmricht@linux.ibm.com>
    perf build: Add detection of java-11-openjdk-devel package

KeMeng Shi <shikemeng@huawei.com>
    sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    sched/membarrier: Fix private expedited registration check

Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
    sched/membarrier: Call sync_core only before usermode for same mm

Nathan Chancellor <natechancellor@gmail.com>
    libnvdimm/nfit_test: Fix acpi_handle redefinition

zhengbin <zhengbin13@huawei.com>
    fuse: fix memleak in cuse_channel_open

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    libnvdimm: Fix endian conversion issues 

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    libnvdimm/region: Initialize bad block for volatile namespaces

Andrei Dulea <adulea@amazon.de>
    iommu/amd: Fix downgrading default page-sizes in alloc_pte()

Stefan Mavrodiev <stefan@olimex.com>
    thermal_hwmon: Sanitize thermal_zone type

Ido Schimmel <idosch@mellanox.com>
    thermal: Fix use-after-free when unregistering thermal zone device

Sanjay R Mehta <sanju.mehta@amd.com>
    ntb: point to right memory window index

Arvind Sankar <nivedita@alum.mit.edu>
    x86/purgatory: Disable the stackleak GCC plugin for the purgatory

Tycho Andersen <tycho@tycho.ws>
    selftests/seccomp: fix build on older kernels

Fabrice Gasnier <fabrice.gasnier@st.com>
    pwm: stm32-lp: Add check in case requested period cannot be achieved

Trond Myklebust <trondmy@gmail.com>
    SUNRPC: Don't try to parse incomplete RPC messages

Trond Myklebust <trondmy@gmail.com>
    pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Fix to clear tev->nargs in clear_probe_trace_event()

Trek <trek00@inbox.ru>
    drm/amdgpu: Check for valid number of registers to read

Felix Kuehling <Felix.Kuehling@amd.com>
    drm/amdgpu: Fix KFD-related kernel oops on Hawaii

Florian Westphal <fw@strlen.de>
    netfilter: nf_tables: allow lookups in dynamic sets

Ryan Chen <ryan_chen@aspeedtech.com>
    watchdog: aspeed: Add support for AST2600

Trond Myklebust <trondmy@gmail.com>
    SUNRPC: RPC level errors should always set task->tk_rpc_status

Erqi Chen <chenerqi@gmail.com>
    ceph: reconnect connection if session hang in opening state

Jeff Layton <jlayton@kernel.org>
    ceph: fetch cap_gen under spinlock in ceph_add_cap

Luis Henriques <lhenriques@suse.com>
    ceph: fix directories inode i_blkbits initialization

Miklos Szeredi <mszeredi@redhat.com>
    fuse: fix request limit

Igor Druzhinin <igor.druzhinin@citrix.com>
    xen/pci: reserve MCFG areas earlier

Chengguang Xu <cgxu519@zoho.com.cn>
    9p: avoid attaching writeback_fid on mmap with type PRIVATE

Lu Shuaibing <shuaibinglu@126.com>
    9p: Transport error uninitialized

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Send Queue size grows after a reconnect

Chuck Lever <chuck.lever@oracle.com>
    xprtrdma: Toggle XPRT_CONGESTED in xprtrdma's slot methods

Jia-Ju Bai <baijiaju1990@gmail.com>
    fs: nfs: Fix possible null-pointer dereferences in encode_attrs()

Sascha Hauer <s.hauer@pengutronix.de>
    ima: fix freeing ongoing ahash_request

Sascha Hauer <s.hauer@pengutronix.de>
    ima: always return negative code for error

Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
    drivers: thermal: qcom: tsens: Fix memory leak from qfprom read

Johannes Berg <johannes.berg@intel.com>
    cfg80211: initialize on-stack chandefs

Johannes Berg <johannes.berg@intel.com>
    cfg80211: validate SSID/MBSSID element ordering assumption

Johannes Berg <johannes.berg@intel.com>
    nl80211: validate beacon head

Johan Hovold <johan@kernel.org>
    ieee802154: atusb: fix use-after-free at disconnect

Juergen Gross <jgross@suse.com>
    xen/xenbus: fix self-deadlock after killing user process

David Hildenbrand <david@redhat.com>
    xen/balloon: Set pages PageOffline() in balloon_add_region()

H. Nikolaus Schaller <hns@goldelico.com>
    DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again

Seth Forshee <seth.forshee@canonical.com>
    sched: Add __ASSEMBLY__ guards around struct clone_args

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    libnvdimm/altmap: Track namespace boundaries in altmap

Wanpeng Li <wanpengli@tencent.com>
    Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"

Adrian Hunter <adrian.hunter@intel.com>
    mmc: sdhci: Let drivers define their DMA mask

Russell King <rmk+kernel@armlinux.org.uk>
    mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence

Russell King <rmk+kernel@armlinux.org.uk>
    mmc: sdhci: improve ADMA error reporting

Nicolin Chen <nicoleotsuka@gmail.com>
    mmc: tegra: Implement ->set_dma_mask()

Johannes Berg <johannes.berg@intel.com>
    mac80211: keep BHs disabled while calling drv_tx_wake_queue()

Xiaolin Zhang <xiaolin.zhang@intel.com>
    drm/i915: to make vgpu ppgtt notificaiton as atomic operation

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915/userptr: Acquire the page lock around set_page_dirty()

Xiaolin Zhang <xiaolin.zhang@intel.com>
    drm/i915/gvt: update vgpu workload head pointer correctly

Kevin Wang <kevin1.wang@amd.com>
    drm/amd/powerplay: change metrics update period from 1ms to 100ms

Lyude Paul <lyude@redhat.com>
    drm/nouveau/kms/nv50-: Don't create MSTMs for eDP connectors

Sean Paul <seanpaul@chromium.org>
    drm/msm/dsi: Fix return value check for clk_get_parent

Tomi Valkeinen <tomi.valkeinen@ti.com>
    drm/omap: fix max fclk divider for omap36xx

Anders Roxell <anders.roxell@linaro.org>
    drm: mali-dp: Mark expected switch fall-through

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/atomic: Take the atomic toys away from X

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/atomic: Reject FLIP_ASYNC unconditionally

Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
    drm/i915/dp: Fix dsc bpp calculations, v5.

Srikar Dronamraju <srikar@linux.vnet.ibm.com>
    perf stat: Fix a segmentation fault when using repeat forever

Jiri Olsa <jolsa@kernel.org>
    perf tools: Fix segfault in cpu_cache_level__read()

Rasmus Villemoes <linux@rasmusvillemoes.dk>
    watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout

Shuah Khan <skhan@linuxfoundation.org>
    selftests: pidfd: Fix undefined reference to pthread_create()

Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
    selftests/tpm2: Add the missing TEST_FILES assignment

Sumit Saxena <sumit.saxena@broadcom.com>
    PCI: Restore Resizable BAR size bits correctly for 1MB BARs

Jon Derrick <jonathan.derrick@intel.com>
    PCI: vmd: Fix shadow offsets to reflect spec changes

Dexuan Cui <decui@microsoft.com>
    PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it

Jon Derrick <jonathan.derrick@intel.com>
    PCI: vmd: Fix config addressing when using bus offsets

Li RongQing <lirongqing@baidu.com>
    timer: Read jiffies once when forwarding base clk

Kees Cook <keescook@chromium.org>
    usercopy: Avoid HIGHMEM pfn warning

Tom Zanussi <zanussi@kernel.org>
    tracing: Make sure variable reference alias has correct var_ref_idx

Michael Nosthoff <committed@heine.so>
    power: supply: sbs-battery: only return health when battery present

Michael Nosthoff <committed@heine.so>
    power: supply: sbs-battery: use correct flags field

Jiaxun Yang <jiaxun.yang@flygoat.com>
    MIPS: Treat Loongson Extensions as ASEs

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - use the full crypt length value

Gilad Ben-Yossef <gilad@benyossef.com>
    crypto: ccree - account for TEE not ready to report

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam - fix concurrency issue in givencrypt descriptor

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam/qi - fix error handling in ERN handler

Wei Yongjun <weiyongjun1@huawei.com>
    crypto: cavium/zip - Add missing single_release()

Herbert Xu <herbert@gondor.apana.org.au>
    crypto: skcipher - Unmap pages after an external error

Alexander Sverdlin <alexander.sverdlin@nokia.com>
    crypto: qat - Silence smp_processor_id() warning

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file

Marc Kleine-Budde <mkl@pengutronix.de>
    can: mcp251x: mcp251x_hw_reset(): allow more time after a reset

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/mm: Fix an Oops in kasan_mmu_init()

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/kasan: Fix shadow area set up for modules.

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/kasan: Fix parallel loading of modules.

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/powernv/ioda: Fix race in TCE level allocation

Gautham R. Shenoy <ego@linux.vnet.ibm.com>
    powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt()

Andrew Donnellan <ajd@linux.ibm.com>
    powerpc/powernv: Restrict OPAL symbol map to only be readable by root

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/ptdump: Fix addresses display on PPC32

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN.

Christophe Leroy <christophe.leroy@c-s.fr>
    powerpc/603: Fix handling of the DIRTY flag

Santosh Sivaraj <santosh@fossix.org>
    powerpc/mce: Schedule work from irq_work

Balbir Singh <bsingharora@gmail.com>
    powerpc/mce: Fix MCE handling for huge pages

Paul Mackerras <paulus@ozlabs.org>
    powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race

Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
    ASoC: sgtl5000: Improve VAG power and mute control

Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
    ASoC: Define a set of DAPM pre/post-up events

Dmitry Osipenko <digetx@gmail.com>
    PM / devfreq: tegra: Fix kHz to Hz conversion

Mike Christie <mchristi@redhat.com>
    nbd: fix max number of supported devs

Wanpeng Li <wanpengli@tencent.com>
    KVM: X86: Fix userspace set invalid CR4

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Don't lose pending doorbell request on migration on P9

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Don't push XIVE context when not using XIVE device

Cédric Le Goater <clg@kaod.org>
    KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions

Heiko Carstens <heiko.carstens@de.ibm.com>
    KVM: s390: fix __insn32_query() inline assembly

Stefan Haberland <sth@linux.ibm.com>
    Revert "s390/dasd: Add discard support for ESE volumes"

Jan Höppner <hoeppner@linux.ibm.com>
    s390/dasd: Fix error handling during online processing

Vasily Gorbik <gor@linux.ibm.com>
    s390/cio: exclude subchannels with no parent from pseudo check

Vasily Gorbik <gor@linux.ibm.com>
    s390/cio: avoid calling strlen on null pointer

Vasily Gorbik <gor@linux.ibm.com>
    s390/topology: avoid firing events before kobjs are created

Thomas Huth <thuth@redhat.com>
    KVM: s390: Test for bad access register and size at the start of S390_MEM_OP

Philipp Rudo <prudo@linux.ibm.com>
    s390/sclp: Fix bit checked for has_sipl

Vasily Gorbik <gor@linux.ibm.com>
    s390/process: avoid potential reading of freed stack


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/boot/dts/omap3-gta04.dtsi                 |   1 +
 arch/mips/include/asm/cpu-features.h               |  16 ++
 arch/mips/include/asm/cpu.h                        |   4 +
 arch/mips/kernel/cpu-probe.c                       |   6 +
 arch/mips/kernel/proc.c                            |   4 +
 arch/powerpc/include/asm/cputable.h                |   5 +-
 arch/powerpc/include/asm/kvm_ppc.h                 |   1 +
 arch/powerpc/include/asm/xive.h                    |   9 +
 arch/powerpc/kernel/dt_cpu_ftrs.c                  |  32 ++-
 arch/powerpc/kernel/head_32.S                      |   6 +-
 arch/powerpc/kernel/mce.c                          |  11 +-
 arch/powerpc/kernel/mce_power.c                    |  19 +-
 arch/powerpc/kvm/book3s.c                          |   8 +-
 arch/powerpc/kvm/book3s_hv.c                       |  24 ++-
 arch/powerpc/kvm/book3s_hv_rm_mmu.c                |  42 +++-
 arch/powerpc/kvm/book3s_hv_rmhandlers.S            |  38 ++--
 arch/powerpc/kvm/book3s_xive.c                     |  60 +++++-
 arch/powerpc/kvm/book3s_xive.h                     |   2 +
 arch/powerpc/kvm/book3s_xive_native.c              |  23 ++-
 arch/powerpc/kvm/powerpc.c                         |   3 +-
 arch/powerpc/mm/book3s32/mmu.c                     |   9 +
 arch/powerpc/mm/book3s64/hash_native.c             |  31 ++-
 arch/powerpc/mm/book3s64/hash_utils.c              |   9 +-
 arch/powerpc/mm/book3s64/radix_tlb.c               |  84 +++++++-
 arch/powerpc/mm/init_64.c                          |  17 +-
 arch/powerpc/mm/kasan/kasan_init_32.c              |  57 +++++-
 arch/powerpc/mm/ptdump/ptdump.c                    |   2 +-
 arch/powerpc/platforms/powernv/opal.c              |  11 +-
 arch/powerpc/platforms/powernv/pci-ioda-tce.c      |  18 +-
 arch/powerpc/platforms/pseries/lpar.c              |   8 +-
 arch/powerpc/sysdev/xive/common.c                  |  87 +++++---
 arch/powerpc/sysdev/xive/native.c                  |   7 +
 arch/riscv/kernel/entry.S                          |   6 +-
 arch/s390/kernel/process.c                         |  22 +-
 arch/s390/kernel/topology.c                        |   3 +-
 arch/s390/kvm/kvm-s390.c                           |   8 +-
 arch/x86/kvm/vmx/nested.c                          |   2 +-
 arch/x86/kvm/x86.c                                 |  38 ++--
 arch/x86/purgatory/Makefile                        |   1 +
 block/blk-mq-sched.c                               |   2 -
 block/blk.h                                        |   2 +
 crypto/skcipher.c                                  |  42 ++--
 drivers/block/nbd.c                                |  39 ++--
 drivers/crypto/caam/caamalg_desc.c                 |   9 +
 drivers/crypto/caam/caamalg_desc.h                 |   2 +-
 drivers/crypto/caam/error.c                        |   1 +
 drivers/crypto/caam/qi.c                           |   5 +-
 drivers/crypto/caam/regs.h                         |   1 +
 drivers/crypto/cavium/zip/zip_main.c               |   3 +
 drivers/crypto/ccree/cc_aead.c                     |   2 +-
 drivers/crypto/ccree/cc_fips.c                     |   8 +-
 drivers/crypto/qat/qat_common/adf_common_drv.h     |   2 +-
 drivers/devfreq/tegra-devfreq.c                    |  12 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c             |   3 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |   3 +
 drivers/gpu/drm/amd/powerplay/navi10_ppt.c         |   2 +-
 drivers/gpu/drm/arm/malidp_hw.c                    |   3 +-
 drivers/gpu/drm/drm_atomic_uapi.c                  |   3 +-
 drivers/gpu/drm/drm_ioctl.c                        |   7 +-
 drivers/gpu/drm/i915/display/intel_display.c       |  12 +-
 drivers/gpu/drm/i915/display/intel_display.h       |   2 +-
 drivers/gpu/drm/i915/display/intel_dp.c            | 184 +++++++++--------
 drivers/gpu/drm/i915/display/intel_dp.h            |   6 +-
 drivers/gpu/drm/i915/display/intel_dp_mst.c        |   2 +-
 drivers/gpu/drm/i915/gem/i915_gem_userptr.c        |  10 +-
 drivers/gpu/drm/i915/gvt/scheduler.c               |  28 +--
 drivers/gpu/drm/i915/i915_drv.h                    |   1 +
 drivers/gpu/drm/i915/i915_gem_gtt.c                |  12 +-
 drivers/gpu/drm/i915/i915_vgpu.c                   |   1 +
 drivers/gpu/drm/msm/dsi/dsi_host.c                 |   8 +-
 drivers/gpu/drm/nouveau/dispnv50/disp.c            |   3 +-
 drivers/gpu/drm/omapdrm/dss/dss.c                  |   2 +-
 drivers/gpu/drm/radeon/radeon_drv.c                |  31 +++
 drivers/gpu/drm/radeon/radeon_kms.c                |  25 ---
 drivers/hwtracing/coresight/coresight-etm4x.c      |  15 +-
 drivers/i2c/busses/i2c-qcom-geni.c                 |  12 +-
 drivers/iommu/amd_iommu.c                          |   3 +-
 drivers/mmc/host/sdhci-of-esdhc.c                  |   7 +-
 drivers/mmc/host/sdhci-tegra.c                     |  48 +++--
 drivers/mmc/host/sdhci.c                           |  27 +--
 drivers/mmc/host/sdhci.h                           |   1 +
 drivers/net/can/spi/mcp251x.c                      |  19 +-
 drivers/net/dsa/microchip/ksz_common.h             |   2 +-
 .../net/ethernet/mellanox/mlxsw/spectrum_flower.c  |   6 +
 drivers/net/ethernet/netronome/nfp/abm/cls.c       |  14 +-
 drivers/net/ieee802154/atusb.c                     |   3 +-
 drivers/ntb/test/ntb_perf.c                        |   2 +-
 drivers/nvdimm/btt.c                               |   8 +-
 drivers/nvdimm/bus.c                               |   2 +-
 drivers/nvdimm/namespace_devs.c                    |   7 +-
 drivers/nvdimm/pfn_devs.c                          |   2 +
 drivers/nvdimm/region.c                            |   4 +-
 drivers/nvdimm/region_devs.c                       |   4 +-
 drivers/nvdimm/security.c                          |   4 +
 drivers/pci/controller/pci-hyperv.c                |   2 +-
 drivers/pci/controller/vmd.c                       |  25 ++-
 drivers/pci/pci.c                                  |   2 +-
 drivers/power/supply/sbs-battery.c                 |  27 ++-
 drivers/pwm/pwm-stm32-lp.c                         |   6 +
 drivers/s390/block/dasd_eckd.c                     |  81 +-------
 drivers/s390/char/sclp_early.c                     |   2 +-
 drivers/s390/cio/ccwgroup.c                        |   2 +-
 drivers/s390/cio/css.c                             |   2 +
 drivers/staging/erofs/dir.c                        |  11 +-
 drivers/staging/erofs/unzip_vle.c                  |  37 +++-
 drivers/staging/erofs/zmap.c                       |   6 +
 drivers/thermal/qcom/tsens-8960.c                  |   2 +
 drivers/thermal/qcom/tsens-v0_1.c                  |  12 +-
 drivers/thermal/qcom/tsens-v1.c                    |   1 +
 drivers/thermal/qcom/tsens.h                       |   1 +
 drivers/thermal/thermal_core.c                     |   2 +-
 drivers/thermal/thermal_hwmon.c                    |   8 +-
 drivers/watchdog/aspeed_wdt.c                      |   4 +-
 drivers/watchdog/imx2_wdt.c                        |   4 +-
 drivers/xen/balloon.c                              |   1 +
 drivers/xen/pci.c                                  |  21 +-
 drivers/xen/xenbus/xenbus_dev_frontend.c           |  20 +-
 fs/9p/vfs_file.c                                   |   3 +
 fs/btrfs/tests/btrfs-tests.c                       |   8 +-
 fs/ceph/caps.c                                     |   9 +-
 fs/ceph/inode.c                                    |   7 +-
 fs/ceph/mds_client.c                               |   4 +-
 fs/fuse/cuse.c                                     |   1 +
 fs/fuse/inode.c                                    |   7 +-
 fs/nfs/nfs4xdr.c                                   |   2 +-
 fs/nfs/pnfs.c                                      |   9 +-
 fs/statfs.c                                        |  17 +-
 include/linux/memremap.h                           |   1 +
 include/linux/sched/mm.h                           |   2 +
 include/sound/soc-dapm.h                           |   2 +
 include/trace/events/writeback.h                   |  38 ++--
 include/uapi/linux/sched.h                         |   2 +
 kernel/elfcore.c                                   |   1 +
 kernel/locking/qspinlock_paravirt.h                |   2 +-
 kernel/sched/core.c                                |   4 +-
 kernel/sched/membarrier.c                          |   2 +-
 kernel/time/tick-broadcast-hrtimer.c               |  57 +++---
 kernel/time/timer.c                                |   8 +-
 kernel/trace/bpf_trace.c                           |  26 ++-
 kernel/trace/trace_events_hist.c                   |   2 +
 mm/usercopy.c                                      |   8 +-
 net/9p/client.c                                    |   1 +
 net/mac80211/util.c                                |  13 +-
 net/netfilter/nf_tables_api.c                      |   7 +-
 net/netfilter/nft_lookup.c                         |   3 -
 net/sunrpc/clnt.c                                  |  20 +-
 net/sunrpc/sched.c                                 |   5 +-
 net/sunrpc/xprtrdma/transport.c                    |   4 +-
 net/sunrpc/xprtrdma/verbs.c                        |  26 +--
 net/wireless/nl80211.c                             |  41 +++-
 net/wireless/reg.c                                 |   2 +-
 net/wireless/scan.c                                |   7 +-
 net/wireless/wext-compat.c                         |   2 +-
 security/integrity/ima/ima_crypto.c                |  10 +-
 sound/soc/codecs/sgtl5000.c                        | 224 ++++++++++++++++++---
 tools/lib/bpf/btf_dump.c                           |   1 +
 tools/lib/traceevent/Makefile                      |   4 +-
 tools/lib/traceevent/event-parse.c                 |   3 +-
 tools/perf/Makefile.config                         |   2 +-
 tools/perf/arch/x86/util/unwind-libunwind.c        |   2 +-
 tools/perf/builtin-stat.c                          |   5 +-
 tools/perf/util/header.c                           |   2 +-
 tools/perf/util/probe-event.c                      |   1 +
 tools/perf/util/stat.c                             |  17 ++
 tools/perf/util/stat.h                             |   1 +
 tools/testing/nvdimm/test/nfit_test.h              |   4 +-
 tools/testing/selftests/bpf/progs/strobemeta.h     |   5 +-
 tools/testing/selftests/pidfd/Makefile             |   2 +-
 tools/testing/selftests/seccomp/seccomp_bpf.c      |   5 +
 tools/testing/selftests/tpm2/Makefile              |   1 +
 171 files changed, 1624 insertions(+), 703 deletions(-)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 001/148] s390/process: avoid potential reading of freed stack
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 002/148] s390/sclp: Fix bit checked for has_sipl Greg Kroah-Hartman
                   ` (151 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ilya Leoshkevich, Vasily Gorbik

From: Vasily Gorbik <gor@linux.ibm.com>

commit 8769f610fe6d473e5e8e221709c3ac402037da6c upstream.

With THREAD_INFO_IN_TASK (which is selected on s390) task's stack usage
is refcounted and should always be protected by get/put when touching
other task's stack to avoid race conditions with task's destruction code.

Fixes: d5c352cdd022 ("s390: move thread_info into task_struct")
Cc: stable@vger.kernel.org # v4.10+
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/process.c |   22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -184,20 +184,30 @@ unsigned long get_wchan(struct task_stru
 
 	if (!p || p == current || p->state == TASK_RUNNING || !task_stack_page(p))
 		return 0;
+
+	if (!try_get_task_stack(p))
+		return 0;
+
 	low = task_stack_page(p);
 	high = (struct stack_frame *) task_pt_regs(p);
 	sf = (struct stack_frame *) p->thread.ksp;
-	if (sf <= low || sf > high)
-		return 0;
+	if (sf <= low || sf > high) {
+		return_address = 0;
+		goto out;
+	}
 	for (count = 0; count < 16; count++) {
 		sf = (struct stack_frame *) sf->back_chain;
-		if (sf <= low || sf > high)
-			return 0;
+		if (sf <= low || sf > high) {
+			return_address = 0;
+			goto out;
+		}
 		return_address = sf->gprs[8];
 		if (!in_sched_functions(return_address))
-			return return_address;
+			goto out;
 	}
-	return 0;
+out:
+	put_task_stack(p);
+	return return_address;
 }
 
 unsigned long arch_align_stack(unsigned long sp)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 002/148] s390/sclp: Fix bit checked for has_sipl
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 001/148] s390/process: avoid potential reading of freed stack Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 003/148] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP Greg Kroah-Hartman
                   ` (150 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Heiko Carstens, Philipp Rudo, Vasily Gorbik

From: Philipp Rudo <prudo@linux.ibm.com>

commit 4df9a82549cfed5b52da21e7d007b79b2ea1769a upstream.

Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/char/sclp_early.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/char/sclp_early.c
+++ b/drivers/s390/char/sclp_early.c
@@ -40,7 +40,7 @@ static void __init sclp_early_facilities
 	sclp.has_gisaf = !!(sccb->fac118 & 0x08);
 	sclp.has_hvs = !!(sccb->fac119 & 0x80);
 	sclp.has_kss = !!(sccb->fac98 & 0x01);
-	sclp.has_sipl = !!(sccb->cbl & 0x02);
+	sclp.has_sipl = !!(sccb->cbl & 0x4000);
 	if (sccb->fac85 & 0x02)
 		S390_lowcore.machine_flags |= MACHINE_FLAG_ESOP;
 	if (sccb->fac91 & 0x40)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 003/148] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 001/148] s390/process: avoid potential reading of freed stack Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 002/148] s390/sclp: Fix bit checked for has_sipl Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 004/148] s390/topology: avoid firing events before kobjs are created Greg Kroah-Hartman
                   ` (149 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thomas Huth, Cornelia Huck,
	Janosch Frank, David Hildenbrand, Christian Borntraeger

From: Thomas Huth <thuth@redhat.com>

commit a13b03bbb4575b350b46090af4dfd30e735aaed1 upstream.

If the KVM_S390_MEM_OP ioctl is called with an access register >= 16,
then there is certainly a bug in the calling userspace application.
We check for wrong access registers, but only if the vCPU was already
in the access register mode before (i.e. the SIE block has recorded
it). The check is also buried somewhere deep in the calling chain (in
the function ar_translation()), so this is somewhat hard to find.

It's better to always report an error to the userspace in case this
field is set wrong, and it's safer in the KVM code if we block wrong
values here early instead of relying on a check somewhere deep down
the calling chain, so let's add another check to kvm_s390_guest_mem_op()
directly.

We also should check that the "size" is non-zero here (thanks to Janosch
Frank for the hint!). If we do not check the size, we could call vmalloc()
with this 0 value, and this will cause a kernel warning.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/r/20190829122517.31042-1-thuth@redhat.com
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/kvm-s390.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -4257,7 +4257,7 @@ static long kvm_s390_guest_mem_op(struct
 	const u64 supported_flags = KVM_S390_MEMOP_F_INJECT_EXCEPTION
 				    | KVM_S390_MEMOP_F_CHECK_ONLY;
 
-	if (mop->flags & ~supported_flags)
+	if (mop->flags & ~supported_flags || mop->ar >= NUM_ACRS || !mop->size)
 		return -EINVAL;
 
 	if (mop->size > MEM_OP_MAX_SIZE)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 004/148] s390/topology: avoid firing events before kobjs are created
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (2 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 003/148] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 005/148] s390/cio: avoid calling strlen on null pointer Greg Kroah-Hartman
                   ` (148 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Heiko Carstens, Vasily Gorbik

From: Vasily Gorbik <gor@linux.ibm.com>

commit f3122a79a1b0a113d3aea748e0ec26f2cb2889de upstream.

arch_update_cpu_topology is first called from:
kernel_init_freeable->sched_init_smp->sched_init_domains

even before cpus has been registered in:
kernel_init_freeable->do_one_initcall->s390_smp_init

Do not trigger kobject_uevent change events until cpu devices are
actually created. Fixes the following kasan findings:

BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb40/0xee0
Read of size 8 at addr 0000000000000020 by task swapper/0/1

BUG: KASAN: global-out-of-bounds in kobject_uevent_env+0xb36/0xee0
Read of size 8 at addr 0000000000000018 by task swapper/0/1

CPU: 0 PID: 1 Comm: swapper/0 Tainted: G    B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000143c6db7e>] show_stack+0x14e/0x1a8)
 [<0000000145956498>] dump_stack+0x1d0/0x218
 [<000000014429fb4c>] print_address_description+0x64/0x380
 [<000000014429f630>] __kasan_report+0x138/0x168
 [<0000000145960b96>] kobject_uevent_env+0xb36/0xee0
 [<0000000143c7c47c>] arch_update_cpu_topology+0x104/0x108
 [<0000000143df9e22>] sched_init_domains+0x62/0xe8
 [<000000014644c94a>] sched_init_smp+0x3a/0xc0
 [<0000000146433a20>] kernel_init_freeable+0x558/0x958
 [<000000014599002a>] kernel_init+0x22/0x160
 [<00000001459a71d4>] ret_from_fork+0x28/0x30
 [<00000001459a71dc>] kernel_thread_starter+0x0/0x10

Cc: stable@vger.kernel.org
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kernel/topology.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -311,7 +311,8 @@ int arch_update_cpu_topology(void)
 	on_each_cpu(__arch_update_dedicated_flag, NULL, 0);
 	for_each_online_cpu(cpu) {
 		dev = get_cpu_device(cpu);
-		kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+		if (dev)
+			kobject_uevent(&dev->kobj, KOBJ_CHANGE);
 	}
 	return rc;
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 005/148] s390/cio: avoid calling strlen on null pointer
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (3 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 004/148] s390/topology: avoid firing events before kobjs are created Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 006/148] s390/cio: exclude subchannels with no parent from pseudo check Greg Kroah-Hartman
                   ` (147 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sebastian Ott, Vasily Gorbik

From: Vasily Gorbik <gor@linux.ibm.com>

commit ea298e6ee8b34b3ed4366be7eb799d0650ebe555 upstream.

Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561

CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G    B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
 [<0000000233826410>] dump_stack+0x1d0/0x218
 [<000000023216fac4>] print_address_description+0x64/0x380
 [<000000023216f5a8>] __kasan_report+0x138/0x168
 [<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
 [<00000002332b618a>] group_store+0x3a/0x50
 [<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
 [<00000002321d409a>] vfs_write+0x132/0x450
 [<00000002321d47da>] ksys_write+0x122/0x208
 [<0000000233877102>] system_call+0x2a6/0x2c8

Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
		O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26

The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.

Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/cio/ccwgroup.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -372,7 +372,7 @@ int ccwgroup_create_dev(struct device *p
 		goto error;
 	}
 	/* Check for trailing stuff. */
-	if (i == num_devices && strlen(buf) > 0) {
+	if (i == num_devices && buf && strlen(buf) > 0) {
 		rc = -EINVAL;
 		goto error;
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 006/148] s390/cio: exclude subchannels with no parent from pseudo check
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (4 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 005/148] s390/cio: avoid calling strlen on null pointer Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 007/148] s390/dasd: Fix error handling during online processing Greg Kroah-Hartman
                   ` (146 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sebastian Ott, Vasily Gorbik

From: Vasily Gorbik <gor@linux.ibm.com>

commit ab5758848039de9a4b249d46e4ab591197eebaf2 upstream.

ccw console is created early in start_kernel and used before css is
initialized or ccw console subchannel is registered. Until then console
subchannel does not have a parent. For that reason assume subchannels
with no parent are not pseudo subchannels. This fixes the following
kasan finding:

BUG: KASAN: global-out-of-bounds in sch_is_pseudo_sch+0x8e/0x98
Read of size 8 at addr 00000000000005e8 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc8-07370-g6ac43dd12538 #2
Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
Call Trace:
([<000000000012cd76>] show_stack+0x14e/0x1e0)
 [<0000000001f7fb44>] dump_stack+0x1a4/0x1f8
 [<00000000007d7afc>] print_address_description+0x64/0x3c8
 [<00000000007d75f6>] __kasan_report+0x14e/0x180
 [<00000000018a2986>] sch_is_pseudo_sch+0x8e/0x98
 [<000000000189b950>] cio_enable_subchannel+0x1d0/0x510
 [<00000000018cac7c>] ccw_device_recognition+0x12c/0x188
 [<0000000002ceb1a8>] ccw_device_enable_console+0x138/0x340
 [<0000000002cf1cbe>] con3215_init+0x25e/0x300
 [<0000000002c8770a>] console_init+0x68a/0x9b8
 [<0000000002c6a3d6>] start_kernel+0x4fe/0x728
 [<0000000000100070>] startup_continue+0x70/0xd0

Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/cio/css.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -1388,6 +1388,8 @@ device_initcall(cio_settle_init);
 
 int sch_is_pseudo_sch(struct subchannel *sch)
 {
+	if (!sch->dev.parent)
+		return 0;
 	return sch == to_css(sch->dev.parent)->pseudo_subchannel;
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 007/148] s390/dasd: Fix error handling during online processing
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (5 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 006/148] s390/cio: exclude subchannels with no parent from pseudo check Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 008/148] Revert "s390/dasd: Add discard support for ESE volumes" Greg Kroah-Hartman
                   ` (145 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Frank Heimes, Jan Höppner,
	Stefan Haberland, Jens Axboe

From: Jan Höppner <hoeppner@linux.ibm.com>

commit dd45483981ac62f432e073fea6e5e11200b9070d upstream.

It is possible that the CCW commands for reading volume and extent pool
information are not supported, either by the storage server (for
dedicated DASDs) or by z/VM (for virtual devices, such as MDISKs).

As a command reject will occur in such a case, the current error
handling leads to a failing online processing and thus the DASD can't be
used at all.

Since the data being read is not essential for an fully operational
DASD, the error handling can be removed. Information about the failing
command is sent to the s390dbf debug feature.

Fixes: c729696bcf8b ("s390/dasd: Recognise data for ESE volumes")
Cc: <stable@vger.kernel.org> # 5.3
Reported-by: Frank Heimes <frank.heimes@canonical.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/block/dasd_eckd.c |   24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -1553,8 +1553,8 @@ static int dasd_eckd_read_vol_info(struc
 	if (rc == 0) {
 		memcpy(&private->vsq, vsq, sizeof(*vsq));
 	} else {
-		dev_warn(&device->cdev->dev,
-			 "Reading the volume storage information failed with rc=%d\n", rc);
+		DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+				"Reading the volume storage information failed with rc=%d", rc);
 	}
 
 	if (useglobal)
@@ -1737,8 +1737,8 @@ static int dasd_eckd_read_ext_pool_info(
 	if (rc == 0) {
 		dasd_eckd_cpy_ext_pool_data(device, lcq);
 	} else {
-		dev_warn(&device->cdev->dev,
-			 "Reading the logical configuration failed with rc=%d\n", rc);
+		DBF_EVENT_DEVID(DBF_WARNING, device->cdev,
+				"Reading the logical configuration failed with rc=%d", rc);
 	}
 
 	dasd_sfree_request(cqr, cqr->memdev);
@@ -2020,14 +2020,10 @@ dasd_eckd_check_characteristics(struct d
 	dasd_eckd_read_features(device);
 
 	/* Read Volume Information */
-	rc = dasd_eckd_read_vol_info(device);
-	if (rc)
-		goto out_err3;
+	dasd_eckd_read_vol_info(device);
 
 	/* Read Extent Pool Information */
-	rc = dasd_eckd_read_ext_pool_info(device);
-	if (rc)
-		goto out_err3;
+	dasd_eckd_read_ext_pool_info(device);
 
 	/* Read Device Characteristics */
 	rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
@@ -5663,14 +5659,10 @@ static int dasd_eckd_restore_device(stru
 	dasd_eckd_read_features(device);
 
 	/* Read Volume Information */
-	rc = dasd_eckd_read_vol_info(device);
-	if (rc)
-		goto out_err2;
+	dasd_eckd_read_vol_info(device);
 
 	/* Read Extent Pool Information */
-	rc = dasd_eckd_read_ext_pool_info(device);
-	if (rc)
-		goto out_err2;
+	dasd_eckd_read_ext_pool_info(device);
 
 	/* Read Device Characteristics */
 	rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 008/148] Revert "s390/dasd: Add discard support for ESE volumes"
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (6 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 007/148] s390/dasd: Fix error handling during online processing Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 009/148] KVM: s390: fix __insn32_query() inline assembly Greg Kroah-Hartman
                   ` (144 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Stefan Haberland, Jens Axboe

From: Stefan Haberland <sth@linux.ibm.com>

commit 964ce509e2ded52c1a61ad86044cc4d70abd9eb8 upstream.

This reverts commit 7e64db1597fe114b83fe17d0ba96c6aa5fca419a.

The thin provisioning feature introduces an IOCTL and the discard support
to allow userspace tools and filesystems to release unused and previously
allocated space respectively.

During some internal performance improvements and further tests, the
release of allocated space revealed some issues that may lead to data
corruption in some configurations when filesystems are mounted with
discard support enabled.

While we're working on a fix and trying to clarify the situation,
this commit reverts the discard support for ESE volumes to prevent
potential data corruption.

Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/s390/block/dasd_eckd.c |   57 ++---------------------------------------
 1 file changed, 3 insertions(+), 54 deletions(-)

--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2055,9 +2055,6 @@ dasd_eckd_check_characteristics(struct d
 	if (readonly)
 		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
 
-	if (dasd_eckd_is_ese(device))
-		dasd_set_feature(device->cdev, DASD_FEATURE_DISCARD, 1);
-
 	dev_info(&device->cdev->dev, "New DASD %04X/%02X (CU %04X/%02X) "
 		 "with %d cylinders, %d heads, %d sectors%s\n",
 		 private->rdc_data.dev_type,
@@ -3691,14 +3688,6 @@ static int dasd_eckd_release_space(struc
 		return -EINVAL;
 }
 
-static struct dasd_ccw_req *
-dasd_eckd_build_cp_discard(struct dasd_device *device, struct dasd_block *block,
-			   struct request *req, sector_t first_trk,
-			   sector_t last_trk)
-{
-	return dasd_eckd_dso_ras(device, block, req, first_trk, last_trk, 1);
-}
-
 static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single(
 					       struct dasd_device *startdev,
 					       struct dasd_block *block,
@@ -4443,10 +4432,6 @@ static struct dasd_ccw_req *dasd_eckd_bu
 	cmdwtd = private->features.feature[12] & 0x40;
 	use_prefix = private->features.feature[8] & 0x01;
 
-	if (req_op(req) == REQ_OP_DISCARD)
-		return dasd_eckd_build_cp_discard(startdev, block, req,
-						  first_trk, last_trk);
-
 	cqr = NULL;
 	if (cdlspecial || dasd_page_cache) {
 		/* do nothing, just fall through to the cmd mode single case */
@@ -4725,14 +4710,12 @@ static struct dasd_ccw_req *dasd_eckd_bu
 						     struct dasd_block *block,
 						     struct request *req)
 {
-	struct dasd_device *startdev = NULL;
 	struct dasd_eckd_private *private;
-	struct dasd_ccw_req *cqr;
+	struct dasd_device *startdev;
 	unsigned long flags;
+	struct dasd_ccw_req *cqr;
 
-	/* Discard requests can only be processed on base devices */
-	if (req_op(req) != REQ_OP_DISCARD)
-		startdev = dasd_alias_get_start_dev(base);
+	startdev = dasd_alias_get_start_dev(base);
 	if (!startdev)
 		startdev = base;
 	private = startdev->private;
@@ -6513,20 +6496,8 @@ static void dasd_eckd_setup_blk_queue(st
 	unsigned int logical_block_size = block->bp_block;
 	struct request_queue *q = block->request_queue;
 	struct dasd_device *device = block->base;
-	struct dasd_eckd_private *private;
-	unsigned int max_discard_sectors;
-	unsigned int max_bytes;
-	unsigned int ext_bytes; /* Extent Size in Bytes */
-	int recs_per_trk;
-	int trks_per_cyl;
-	int ext_limit;
-	int ext_size; /* Extent Size in Cylinders */
 	int max;
 
-	private = device->private;
-	trks_per_cyl = private->rdc_data.trk_per_cyl;
-	recs_per_trk = recs_per_track(&private->rdc_data, 0, logical_block_size);
-
 	if (device->features & DASD_FEATURE_USERAW) {
 		/*
 		 * the max_blocks value for raw_track access is 256
@@ -6547,28 +6518,6 @@ static void dasd_eckd_setup_blk_queue(st
 	/* With page sized segments each segment can be translated into one idaw/tidaw */
 	blk_queue_max_segment_size(q, PAGE_SIZE);
 	blk_queue_segment_boundary(q, PAGE_SIZE - 1);
-
-	if (dasd_eckd_is_ese(device)) {
-		/*
-		 * Depending on the extent size, up to UINT_MAX bytes can be
-		 * accepted. However, neither DASD_ECKD_RAS_EXTS_MAX nor the
-		 * device limits should be exceeded.
-		 */
-		ext_size = dasd_eckd_ext_size(device);
-		ext_limit = min(private->real_cyl / ext_size, DASD_ECKD_RAS_EXTS_MAX);
-		ext_bytes = ext_size * trks_per_cyl * recs_per_trk *
-			logical_block_size;
-		max_bytes = UINT_MAX - (UINT_MAX % ext_bytes);
-		if (max_bytes / ext_bytes > ext_limit)
-			max_bytes = ext_bytes * ext_limit;
-
-		max_discard_sectors = max_bytes / 512;
-
-		blk_queue_max_discard_sectors(q, max_discard_sectors);
-		blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
-		q->limits.discard_granularity = ext_bytes;
-		q->limits.discard_alignment = ext_bytes;
-	}
 }
 
 static struct ccw_driver dasd_eckd_driver = {



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 009/148] KVM: s390: fix __insn32_query() inline assembly
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (7 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 008/148] Revert "s390/dasd: Add discard support for ESE volumes" Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 010/148] KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions Greg Kroah-Hartman
                   ` (143 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christian Borntraeger,
	Heiko Carstens, Vasily Gorbik

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit b1c41ac3ce569b04644bb1e3fd28926604637da3 upstream.

The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d668139718a9 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/s390/kvm/kvm-s390.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -332,7 +332,7 @@ static inline int plo_test_bit(unsigned
 	return cc == 0;
 }
 
-static inline void __insn32_query(unsigned int opcode, u8 query[32])
+static inline void __insn32_query(unsigned int opcode, u8 *query)
 {
 	register unsigned long r0 asm("0") = 0;	/* query function */
 	register unsigned long r1 asm("1") = (unsigned long) query;
@@ -340,9 +340,9 @@ static inline void __insn32_query(unsign
 	asm volatile(
 		/* Parameter regs are ignored */
 		"	.insn	rrf,%[opc] << 16,2,4,6,0\n"
-		: "=m" (*query)
+		:
 		: "d" (r0), "a" (r1), [opc] "i" (opcode)
-		: "cc");
+		: "cc", "memory");
 }
 
 #define INSN_SORTL 0xb938



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 010/148] KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (8 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 009/148] KVM: s390: fix __insn32_query() inline assembly Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 011/148] KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP Greg Kroah-Hartman
                   ` (142 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, David Gibson, Cédric Le Goater,
	Paul Mackerras

From: Paul Mackerras <paulus@ozlabs.org>

commit 2ad7a27deaf6d78545d97ab80874584f6990360e upstream.

There are some POWER9 machines where the OPAL firmware does not support
the OPAL_XIVE_GET_QUEUE_STATE and OPAL_XIVE_SET_QUEUE_STATE calls.
The impact of this is that a guest using XIVE natively will not be able
to be migrated successfully.  On the source side, the get_attr operation
on the KVM native device for the KVM_DEV_XIVE_GRP_EQ_CONFIG attribute
will fail; on the destination side, the set_attr operation for the same
attribute will fail.

This adds tests for the existence of the OPAL get/set queue state
functions, and if they are not supported, the XIVE-native KVM device
is not created and the KVM_CAP_PPC_IRQ_XIVE capability returns false.
Userspace can then either provide a software emulation of XIVE, or
else tell the guest that it does not have a XIVE controller available
to it.

Cc: stable@vger.kernel.org # v5.2+
Fixes: 3fab2d10588e ("KVM: PPC: Book3S HV: XIVE: Activate XIVE exploitation mode")
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/kvm_ppc.h    |    1 +
 arch/powerpc/include/asm/xive.h       |    1 +
 arch/powerpc/kvm/book3s.c             |    8 +++++---
 arch/powerpc/kvm/book3s_xive_native.c |    5 +++++
 arch/powerpc/kvm/powerpc.c            |    3 ++-
 arch/powerpc/sysdev/xive/native.c     |    7 +++++++
 6 files changed, 21 insertions(+), 4 deletions(-)

--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -598,6 +598,7 @@ extern int kvmppc_xive_native_get_vp(str
 				     union kvmppc_one_reg *val);
 extern int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu,
 				     union kvmppc_one_reg *val);
+extern bool kvmppc_xive_native_supported(void);
 
 #else
 static inline int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server,
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -127,6 +127,7 @@ extern int xive_native_get_queue_state(u
 extern int xive_native_set_queue_state(u32 vp_id, uint32_t prio, u32 qtoggle,
 				       u32 qindex);
 extern int xive_native_get_vp_state(u32 vp_id, u64 *out_state);
+extern bool xive_native_has_queue_state_support(void);
 
 #else
 
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -1083,9 +1083,11 @@ static int kvmppc_book3s_init(void)
 	if (xics_on_xive()) {
 		kvmppc_xive_init_module();
 		kvm_register_device_ops(&kvm_xive_ops, KVM_DEV_TYPE_XICS);
-		kvmppc_xive_native_init_module();
-		kvm_register_device_ops(&kvm_xive_native_ops,
-					KVM_DEV_TYPE_XIVE);
+		if (kvmppc_xive_native_supported()) {
+			kvmppc_xive_native_init_module();
+			kvm_register_device_ops(&kvm_xive_native_ops,
+						KVM_DEV_TYPE_XIVE);
+		}
 	} else
 #endif
 		kvm_register_device_ops(&kvm_xics_ops, KVM_DEV_TYPE_XICS);
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -1171,6 +1171,11 @@ int kvmppc_xive_native_set_vp(struct kvm
 	return 0;
 }
 
+bool kvmppc_xive_native_supported(void)
+{
+	return xive_native_has_queue_state_support();
+}
+
 static int xive_native_debug_show(struct seq_file *m, void *private)
 {
 	struct kvmppc_xive *xive = m->private;
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -561,7 +561,8 @@ int kvm_vm_ioctl_check_extension(struct
 		 * a POWER9 processor) and the PowerNV platform, as
 		 * nested is not yet supported.
 		 */
-		r = xive_enabled() && !!cpu_has_feature(CPU_FTR_HVMODE);
+		r = xive_enabled() && !!cpu_has_feature(CPU_FTR_HVMODE) &&
+			kvmppc_xive_native_supported();
 		break;
 #endif
 
--- a/arch/powerpc/sysdev/xive/native.c
+++ b/arch/powerpc/sysdev/xive/native.c
@@ -811,6 +811,13 @@ int xive_native_set_queue_state(u32 vp_i
 }
 EXPORT_SYMBOL_GPL(xive_native_set_queue_state);
 
+bool xive_native_has_queue_state_support(void)
+{
+	return opal_check_token(OPAL_XIVE_GET_QUEUE_STATE) &&
+		opal_check_token(OPAL_XIVE_SET_QUEUE_STATE);
+}
+EXPORT_SYMBOL_GPL(xive_native_has_queue_state_support);
+
 int xive_native_get_vp_state(u32 vp_id, u64 *out_state)
 {
 	__be64 state;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 011/148] KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (9 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 010/148] KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 012/148] KVM: PPC: Book3S HV: Dont push XIVE context when not using XIVE device Greg Kroah-Hartman
                   ` (141 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Cédric Le Goater, Michael Ellerman

From: Cédric Le Goater <clg@kaod.org>

commit 237aed48c642328ff0ab19b63423634340224a06 upstream.

When a vCPU is brought done, the XIVE VP (Virtual Processor) is first
disabled and then the event notification queues are freed. When freeing
the queues, we check for possible escalation interrupts and free them
also.

But when a XIVE VP is disabled, the underlying XIVE ENDs also are
disabled in OPAL. When an END (Event Notification Descriptor) is
disabled, its ESB pages (ESn and ESe) are disabled and loads return all
1s. Which means that any access on the ESB page of the escalation
interrupt will return invalid values.

When an interrupt is freed, the shutdown handler computes a 'saved_p'
field from the value returned by a load in xive_do_source_set_mask().
This value is incorrect for escalation interrupts for the reason
described above.

This has no impact on Linux/KVM today because we don't make use of it
but we will introduce in future changes a xive_get_irqchip_state()
handler. This handler will use the 'saved_p' field to return the state
of an interrupt and 'saved_p' being incorrect, softlockup will occur.

Fix the vCPU cleanup sequence by first freeing the escalation interrupts
if any, then disable the XIVE VP and last free the queues.

Fixes: 90c73795afa2 ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806172538.5087-1-clg@kaod.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_xive.c        |   18 ++++++++++--------
 arch/powerpc/kvm/book3s_xive_native.c |   12 +++++++-----
 2 files changed, 17 insertions(+), 13 deletions(-)

--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -1134,20 +1134,22 @@ void kvmppc_xive_cleanup_vcpu(struct kvm
 	/* Mask the VP IPI */
 	xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_01);
 
-	/* Disable the VP */
-	xive_native_disable_vp(xc->vp_id);
-
-	/* Free the queues & associated interrupts */
+	/* Free escalations */
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
-		struct xive_q *q = &xc->queues[i];
-
-		/* Free the escalation irq */
 		if (xc->esc_virq[i]) {
 			free_irq(xc->esc_virq[i], vcpu);
 			irq_dispose_mapping(xc->esc_virq[i]);
 			kfree(xc->esc_virq_names[i]);
 		}
-		/* Free the queue */
+	}
+
+	/* Disable the VP */
+	xive_native_disable_vp(xc->vp_id);
+
+	/* Free the queues */
+	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+		struct xive_q *q = &xc->queues[i];
+
 		xive_native_disable_queue(xc->vp_id, q, i);
 		if (q->qpage) {
 			free_pages((unsigned long)q->qpage,
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -67,10 +67,7 @@ void kvmppc_xive_native_cleanup_vcpu(str
 	xc->valid = false;
 	kvmppc_xive_disable_vcpu_interrupts(vcpu);
 
-	/* Disable the VP */
-	xive_native_disable_vp(xc->vp_id);
-
-	/* Free the queues & associated interrupts */
+	/* Free escalations */
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		/* Free the escalation irq */
 		if (xc->esc_virq[i]) {
@@ -79,8 +76,13 @@ void kvmppc_xive_native_cleanup_vcpu(str
 			kfree(xc->esc_virq_names[i]);
 			xc->esc_virq[i] = 0;
 		}
+	}
 
-		/* Free the queue */
+	/* Disable the VP */
+	xive_native_disable_vp(xc->vp_id);
+
+	/* Free the queues */
+	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		kvmppc_xive_native_cleanup_queue(vcpu, i);
 	}
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 012/148] KVM: PPC: Book3S HV: Dont push XIVE context when not using XIVE device
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (10 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 011/148] KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 013/148] KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts Greg Kroah-Hartman
                   ` (140 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Cédric Le Goater,
	Paul Mackerras, Michael Ellerman

From: Paul Mackerras <paulus@ozlabs.org>

commit 8d4ba9c931bc384bcc6889a43915aaaf19d3e499 upstream.

At present, when running a guest on POWER9 using HV KVM but not using
an in-kernel interrupt controller (XICS or XIVE), for example if QEMU
is run with the kernel_irqchip=off option, the guest entry code goes
ahead and tries to load the guest context into the XIVE hardware, even
though no context has been set up.

To fix this, we check that the "CAM word" is non-zero before pushing
it to the hardware.  The CAM word is initialized to a non-zero value
in kvmppc_xive_connect_vcpu() and kvmppc_xive_native_connect_vcpu(),
and is now cleared in kvmppc_xive_{,native_}cleanup_vcpu.

Fixes: 5af50993850a ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100100.GC9567@blackberry
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |    2 ++
 arch/powerpc/kvm/book3s_xive.c          |   11 ++++++++++-
 arch/powerpc/kvm/book3s_xive_native.c   |    3 +++
 3 files changed, 15 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -942,6 +942,8 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_3
 	ld	r11, VCPU_XIVE_SAVED_STATE(r4)
 	li	r9, TM_QW1_OS
 	lwz	r8, VCPU_XIVE_CAM_WORD(r4)
+	cmpwi	r8, 0
+	beq	no_xive
 	li	r7, TM_QW1_OS + TM_WORD2
 	mfmsr	r0
 	andi.	r0, r0, MSR_DR		/* in real mode? */
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -67,8 +67,14 @@ void kvmppc_xive_push_vcpu(struct kvm_vc
 	void __iomem *tima = local_paca->kvm_hstate.xive_tima_virt;
 	u64 pq;
 
-	if (!tima)
+	/*
+	 * Nothing to do if the platform doesn't have a XIVE
+	 * or this vCPU doesn't have its own XIVE context
+	 * (e.g. because it's not using an in-kernel interrupt controller).
+	 */
+	if (!tima || !vcpu->arch.xive_cam_word)
 		return;
+
 	eieio();
 	__raw_writeq(vcpu->arch.xive_saved_state.w01, tima + TM_QW1_OS);
 	__raw_writel(vcpu->arch.xive_cam_word, tima + TM_QW1_OS + TM_WORD2);
@@ -1146,6 +1152,9 @@ void kvmppc_xive_cleanup_vcpu(struct kvm
 	/* Disable the VP */
 	xive_native_disable_vp(xc->vp_id);
 
+	/* Clear the cam word so guest entry won't try to push context */
+	vcpu->arch.xive_cam_word = 0;
+
 	/* Free the queues */
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		struct xive_q *q = &xc->queues[i];
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -81,6 +81,9 @@ void kvmppc_xive_native_cleanup_vcpu(str
 	/* Disable the VP */
 	xive_native_disable_vp(xc->vp_id);
 
+	/* Clear the cam word so guest entry won't try to push context */
+	vcpu->arch.xive_cam_word = 0;
+
 	/* Free the queues */
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		kvmppc_xive_native_cleanup_queue(vcpu, i);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 013/148] KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (11 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 012/148] KVM: PPC: Book3S HV: Dont push XIVE context when not using XIVE device Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 014/148] KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores Greg Kroah-Hartman
                   ` (139 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Mackerras, Michael Ellerman

From: Paul Mackerras <paulus@ozlabs.org>

commit 959c5d5134786b4988b6fdd08e444aa67d1667ed upstream.

Escalation interrupts are interrupts sent to the host by the XIVE
hardware when it has an interrupt to deliver to a guest VCPU but that
VCPU is not running anywhere in the system.  Hence we disable the
escalation interrupt for the VCPU being run when we enter the guest
and re-enable it when the guest does an H_CEDE hypercall indicating
it is idle.

It is possible that an escalation interrupt gets generated just as we
are entering the guest.  In that case the escalation interrupt may be
using a queue entry in one of the interrupt queues, and that queue
entry may not have been processed when the guest exits with an H_CEDE.
The existing entry code detects this situation and does not clear the
vcpu->arch.xive_esc_on flag as an indication that there is a pending
queue entry (if the queue entry gets processed, xive_esc_irq() will
clear the flag).  There is a comment in the code saying that if the
flag is still set on H_CEDE, we have to abort the cede rather than
re-enabling the escalation interrupt, lest we end up with two
occurrences of the escalation interrupt in the interrupt queue.

However, the exit code doesn't do that; it aborts the cede in the sense
that vcpu->arch.ceded gets cleared, but it still enables the escalation
interrupt by setting the source's PQ bits to 00.  Instead we need to
set the PQ bits to 10, indicating that an interrupt has been triggered.
We also need to avoid setting vcpu->arch.xive_esc_on in this case
(i.e. vcpu->arch.xive_esc_on seen to be set on H_CEDE) because
xive_esc_irq() will run at some point and clear it, and if we race with
that we may end up with an incorrect result (i.e. xive_esc_on set when
the escalation interrupt has just been handled).

It is extremely unlikely that having two queue entries would cause
observable problems; theoretically it could cause queue overflow, but
the CPU would have to have thousands of interrupts targetted to it for
that to be possible.  However, this fix will also make it possible to
determine accurately whether there is an unhandled escalation
interrupt in the queue, which will be needed by the following patch.

Fixes: 9b9b13a6d153 ("KVM: PPC: Book3S HV: Keep XIVE escalation interrupt masked unless ceded")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100349.GD9567@blackberry
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv_rmhandlers.S |   36 ++++++++++++++++++++------------
 1 file changed, 23 insertions(+), 13 deletions(-)

--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -2833,29 +2833,39 @@ kvm_cede_prodded:
 kvm_cede_exit:
 	ld	r9, HSTATE_KVM_VCPU(r13)
 #ifdef CONFIG_KVM_XICS
-	/* Abort if we still have a pending escalation */
+	/* are we using XIVE with single escalation? */
+	ld	r10, VCPU_XIVE_ESC_VADDR(r9)
+	cmpdi	r10, 0
+	beq	3f
+	li	r6, XIVE_ESB_SET_PQ_00
+	/*
+	 * If we still have a pending escalation, abort the cede,
+	 * and we must set PQ to 10 rather than 00 so that we don't
+	 * potentially end up with two entries for the escalation
+	 * interrupt in the XIVE interrupt queue.  In that case
+	 * we also don't want to set xive_esc_on to 1 here in
+	 * case we race with xive_esc_irq().
+	 */
 	lbz	r5, VCPU_XIVE_ESC_ON(r9)
 	cmpwi	r5, 0
-	beq	1f
+	beq	4f
 	li	r0, 0
 	stb	r0, VCPU_CEDED(r9)
-1:	/* Enable XIVE escalation */
-	li	r5, XIVE_ESB_SET_PQ_00
+	li	r6, XIVE_ESB_SET_PQ_10
+	b	5f
+4:	li	r0, 1
+	stb	r0, VCPU_XIVE_ESC_ON(r9)
+	/* make sure store to xive_esc_on is seen before xive_esc_irq runs */
+	sync
+5:	/* Enable XIVE escalation */
 	mfmsr	r0
 	andi.	r0, r0, MSR_DR		/* in real mode? */
 	beq	1f
-	ld	r10, VCPU_XIVE_ESC_VADDR(r9)
-	cmpdi	r10, 0
-	beq	3f
-	ldx	r0, r10, r5
+	ldx	r0, r10, r6
 	b	2f
 1:	ld	r10, VCPU_XIVE_ESC_RADDR(r9)
-	cmpdi	r10, 0
-	beq	3f
-	ldcix	r0, r10, r5
+	ldcix	r0, r10, r6
 2:	sync
-	li	r0, 1
-	stb	r0, VCPU_XIVE_ESC_ON(r9)
 #endif /* CONFIG_KVM_XICS */
 3:	b	guest_exit_cont
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 014/148] KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (12 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 013/148] KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 015/148] KVM: PPC: Book3S HV: Dont lose pending doorbell request on migration on P9 Greg Kroah-Hartman
                   ` (138 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Mackerras

From: Paul Mackerras <paulus@ozlabs.org>

commit d28eafc5a64045c78136162af9d4ba42f8230080 upstream.

When we are running multiple vcores on the same physical core, they
could be from different VMs and so it is possible that one of the
VMs could have its arch.mmu_ready flag cleared (for example by a
concurrent HPT resize) when we go to run it on a physical core.
We currently check the arch.mmu_ready flag for the primary vcore
but not the flags for the other vcores that will be run alongside
it.  This adds that check, and also a check when we select the
secondary vcores from the preempted vcores list.

Cc: stable@vger.kernel.org # v4.14+
Fixes: 38c53af85306 ("KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -2860,7 +2860,7 @@ static void collect_piggybacks(struct co
 		if (!spin_trylock(&pvc->lock))
 			continue;
 		prepare_threads(pvc);
-		if (!pvc->n_runnable) {
+		if (!pvc->n_runnable || !pvc->kvm->arch.mmu_ready) {
 			list_del_init(&pvc->preempt_list);
 			if (pvc->runner == NULL) {
 				pvc->vcore_state = VCORE_INACTIVE;
@@ -2881,15 +2881,20 @@ static void collect_piggybacks(struct co
 	spin_unlock(&lp->lock);
 }
 
-static bool recheck_signals(struct core_info *cip)
+static bool recheck_signals_and_mmu(struct core_info *cip)
 {
 	int sub, i;
 	struct kvm_vcpu *vcpu;
+	struct kvmppc_vcore *vc;
 
-	for (sub = 0; sub < cip->n_subcores; ++sub)
-		for_each_runnable_thread(i, vcpu, cip->vc[sub])
+	for (sub = 0; sub < cip->n_subcores; ++sub) {
+		vc = cip->vc[sub];
+		if (!vc->kvm->arch.mmu_ready)
+			return true;
+		for_each_runnable_thread(i, vcpu, vc)
 			if (signal_pending(vcpu->arch.run_task))
 				return true;
+	}
 	return false;
 }
 
@@ -3119,7 +3124,7 @@ static noinline void kvmppc_run_core(str
 	local_irq_disable();
 	hard_irq_disable();
 	if (lazy_irq_pending() || need_resched() ||
-	    recheck_signals(&core_info) || !vc->kvm->arch.mmu_ready) {
+	    recheck_signals_and_mmu(&core_info)) {
 		local_irq_enable();
 		vc->vcore_state = VCORE_INACTIVE;
 		/* Unlock all except the primary vcore */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 015/148] KVM: PPC: Book3S HV: Dont lose pending doorbell request on migration on P9
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (13 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 014/148] KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 016/148] KVM: X86: Fix userspace set invalid CR4 Greg Kroah-Hartman
                   ` (137 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Paul Mackerras, Alexey Kardashevskiy

From: Paul Mackerras <paulus@ozlabs.org>

commit ff42df49e75f053a8a6b4c2533100cdcc23afe69 upstream.

On POWER9, when userspace reads the value of the DPDES register on a
vCPU, it is possible for 0 to be returned although there is a doorbell
interrupt pending for the vCPU.  This can lead to a doorbell interrupt
being lost across migration.  If the guest kernel uses doorbell
interrupts for IPIs, then it could malfunction because of the lost
interrupt.

This happens because a newly-generated doorbell interrupt is signalled
by setting vcpu->arch.doorbell_request to 1; the DPDES value in
vcpu->arch.vcore->dpdes is not updated, because it can only be updated
when holding the vcpu mutex, in order to avoid races.

To fix this, we OR in vcpu->arch.doorbell_request when reading the
DPDES value.

Cc: stable@vger.kernel.org # v4.13+
Fixes: 579006944e0d ("KVM: PPC: Book3S HV: Virtualize doorbell facility on POWER9")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1678,7 +1678,14 @@ static int kvmppc_get_one_reg_hv(struct
 		*val = get_reg_val(id, vcpu->arch.pspb);
 		break;
 	case KVM_REG_PPC_DPDES:
-		*val = get_reg_val(id, vcpu->arch.vcore->dpdes);
+		/*
+		 * On POWER9, where we are emulating msgsndp etc.,
+		 * we return 1 bit for each vcpu, which can come from
+		 * either vcore->dpdes or doorbell_request.
+		 * On POWER8, doorbell_request is 0.
+		 */
+		*val = get_reg_val(id, vcpu->arch.vcore->dpdes |
+				   vcpu->arch.doorbell_request);
 		break;
 	case KVM_REG_PPC_VTB:
 		*val = get_reg_val(id, vcpu->arch.vcore->vtb);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 016/148] KVM: X86: Fix userspace set invalid CR4
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (14 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 015/148] KVM: PPC: Book3S HV: Dont lose pending doorbell request on migration on P9 Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 017/148] nbd: fix max number of supported devs Greg Kroah-Hartman
                   ` (136 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, syzbot+0f1819555fbdce992df9,
	Wanpeng Li, Sean Christopherson, Paolo Bonzini

From: Wanpeng Li <wanpengli@tencent.com>

commit 3ca94192278ca8de169d78c085396c424be123b3 upstream.

Reported by syzkaller:

	WARNING: CPU: 0 PID: 6544 at /home/kernel/data/kvm/arch/x86/kvm//vmx/vmx.c:4689 handle_desc+0x37/0x40 [kvm_intel]
	CPU: 0 PID: 6544 Comm: a.out Tainted: G           OE     5.3.0-rc4+ #4
	RIP: 0010:handle_desc+0x37/0x40 [kvm_intel]
	Call Trace:
	 vmx_handle_exit+0xbe/0x6b0 [kvm_intel]
	 vcpu_enter_guest+0x4dc/0x18d0 [kvm]
	 kvm_arch_vcpu_ioctl_run+0x407/0x660 [kvm]
	 kvm_vcpu_ioctl+0x3ad/0x690 [kvm]
	 do_vfs_ioctl+0xa2/0x690
	 ksys_ioctl+0x6d/0x80
	 __x64_sys_ioctl+0x1a/0x20
	 do_syscall_64+0x74/0x720
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

When CR4.UMIP is set, guest should have UMIP cpuid flag. Current
kvm set_sregs function doesn't have such check when userspace inputs
sregs values. SECONDARY_EXEC_DESC is enabled on writes to CR4.UMIP
in vmx_set_cr4 though guest doesn't have UMIP cpuid flag. The testcast
triggers handle_desc warning when executing ltr instruction since
guest architectural CR4 doesn't set UMIP. This patch fixes it by
adding valid CR4 and CPUID combination checking in __set_sregs.

syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=138efb99600000

Reported-by: syzbot+0f1819555fbdce992df9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |   38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -884,34 +884,42 @@ int kvm_set_xcr(struct kvm_vcpu *vcpu, u
 }
 EXPORT_SYMBOL_GPL(kvm_set_xcr);
 
-int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+static int kvm_valid_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	unsigned long old_cr4 = kvm_read_cr4(vcpu);
-	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
-				   X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE;
-
 	if (cr4 & CR4_RESERVED_BITS)
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && (cr4 & X86_CR4_OSXSAVE))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_SMEP) && (cr4 & X86_CR4_SMEP))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_SMAP) && (cr4 & X86_CR4_SMAP))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_FSGSBASE) && (cr4 & X86_CR4_FSGSBASE))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_PKU) && (cr4 & X86_CR4_PKE))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_LA57) && (cr4 & X86_CR4_LA57))
-		return 1;
+		return -EINVAL;
 
 	if (!guest_cpuid_has(vcpu, X86_FEATURE_UMIP) && (cr4 & X86_CR4_UMIP))
+		return -EINVAL;
+
+	return 0;
+}
+
+int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
+{
+	unsigned long old_cr4 = kvm_read_cr4(vcpu);
+	unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE |
+				   X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE;
+
+	if (kvm_valid_cr4(vcpu, cr4))
 		return 1;
 
 	if (is_long_mode(vcpu)) {
@@ -8598,10 +8606,6 @@ EXPORT_SYMBOL_GPL(kvm_task_switch);
 
 static int kvm_valid_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs)
 {
-	if (!guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) &&
-			(sregs->cr4 & X86_CR4_OSXSAVE))
-		return  -EINVAL;
-
 	if ((sregs->efer & EFER_LME) && (sregs->cr0 & X86_CR0_PG)) {
 		/*
 		 * When EFER.LME and CR0.PG are set, the processor is in
@@ -8620,7 +8624,7 @@ static int kvm_valid_sregs(struct kvm_vc
 			return -EINVAL;
 	}
 
-	return 0;
+	return kvm_valid_cr4(vcpu, sregs->cr4);
 }
 
 static int __set_sregs(struct kvm_vcpu *vcpu, struct kvm_sregs *sregs)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 017/148] nbd: fix max number of supported devs
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (15 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 016/148] KVM: X86: Fix userspace set invalid CR4 Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 018/148] PM / devfreq: tegra: Fix kHz to Hz conversion Greg Kroah-Hartman
                   ` (135 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Josef Bacik, Mike Christie, Jens Axboe

From: Mike Christie <mchristi@redhat.com>

commit e9e006f5fcf2bab59149cb38a48a4817c1b538b4 upstream.

This fixes a bug added in 4.10 with commit:

commit 9561a7ade0c205bc2ee035a2ac880478dcc1a024
Author: Josef Bacik <jbacik@fb.com>
Date:   Tue Nov 22 14:04:40 2016 -0500

    nbd: add multi-connection support

that limited the number of devices to 256. Before the patch we could
create 1000s of devices, but the patch switched us from using our
own thread to using a work queue which has a default limit of 256
active works.

The problem is that our recv_work function sits in a loop until
disconnection but only handles IO for one connection. The work is
started when the connection is started/restarted, but if we end up
creating 257 or more connections, the queue_work call just queues
connection257+'s recv_work and that waits for connection 1 - 256's
recv_work to be disconnected and that work instance completing.

Instead of reverting back to kthreads, this has us allocate a
workqueue_struct per device, so we can block in the work.

Cc: stable@vger.kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/nbd.c |   39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -108,6 +108,7 @@ struct nbd_device {
 	struct nbd_config *config;
 	struct mutex config_lock;
 	struct gendisk *disk;
+	struct workqueue_struct *recv_workq;
 
 	struct list_head list;
 	struct task_struct *task_recv;
@@ -138,7 +139,6 @@ static struct dentry *nbd_dbg_dir;
 
 static unsigned int nbds_max = 16;
 static int max_part = 16;
-static struct workqueue_struct *recv_workqueue;
 static int part_shift;
 
 static int nbd_dev_dbg_init(struct nbd_device *nbd);
@@ -1038,7 +1038,7 @@ static int nbd_reconnect_socket(struct n
 		/* We take the tx_mutex in an error path in the recv_work, so we
 		 * need to queue_work outside of the tx_mutex.
 		 */
-		queue_work(recv_workqueue, &args->work);
+		queue_work(nbd->recv_workq, &args->work);
 
 		atomic_inc(&config->live_connections);
 		wake_up(&config->conn_wait);
@@ -1139,6 +1139,10 @@ static void nbd_config_put(struct nbd_de
 		kfree(nbd->config);
 		nbd->config = NULL;
 
+		if (nbd->recv_workq)
+			destroy_workqueue(nbd->recv_workq);
+		nbd->recv_workq = NULL;
+
 		nbd->tag_set.timeout = 0;
 		nbd->disk->queue->limits.discard_granularity = 0;
 		nbd->disk->queue->limits.discard_alignment = 0;
@@ -1167,6 +1171,14 @@ static int nbd_start_device(struct nbd_d
 		return -EINVAL;
 	}
 
+	nbd->recv_workq = alloc_workqueue("knbd%d-recv",
+					  WQ_MEM_RECLAIM | WQ_HIGHPRI |
+					  WQ_UNBOUND, 0, nbd->index);
+	if (!nbd->recv_workq) {
+		dev_err(disk_to_dev(nbd->disk), "Could not allocate knbd recv work queue.\n");
+		return -ENOMEM;
+	}
+
 	blk_mq_update_nr_hw_queues(&nbd->tag_set, config->num_connections);
 	nbd->task_recv = current;
 
@@ -1197,7 +1209,7 @@ static int nbd_start_device(struct nbd_d
 		INIT_WORK(&args->work, recv_work);
 		args->nbd = nbd;
 		args->index = i;
-		queue_work(recv_workqueue, &args->work);
+		queue_work(nbd->recv_workq, &args->work);
 	}
 	nbd_size_update(nbd);
 	return error;
@@ -1217,8 +1229,10 @@ static int nbd_start_device_ioctl(struct
 	mutex_unlock(&nbd->config_lock);
 	ret = wait_event_interruptible(config->recv_wq,
 					 atomic_read(&config->recv_threads) == 0);
-	if (ret)
+	if (ret) {
 		sock_shutdown(nbd);
+		flush_workqueue(nbd->recv_workq);
+	}
 	mutex_lock(&nbd->config_lock);
 	nbd_bdev_reset(bdev);
 	/* user requested, ignore socket errors */
@@ -1877,6 +1891,12 @@ static void nbd_disconnect_and_put(struc
 	nbd_disconnect(nbd);
 	nbd_clear_sock(nbd);
 	mutex_unlock(&nbd->config_lock);
+	/*
+	 * Make sure recv thread has finished, so it does not drop the last
+	 * config ref and try to destroy the workqueue from inside the work
+	 * queue.
+	 */
+	flush_workqueue(nbd->recv_workq);
 	if (test_and_clear_bit(NBD_HAS_CONFIG_REF,
 			       &nbd->config->runtime_flags))
 		nbd_config_put(nbd);
@@ -2263,20 +2283,12 @@ static int __init nbd_init(void)
 
 	if (nbds_max > 1UL << (MINORBITS - part_shift))
 		return -EINVAL;
-	recv_workqueue = alloc_workqueue("knbd-recv",
-					 WQ_MEM_RECLAIM | WQ_HIGHPRI |
-					 WQ_UNBOUND, 0);
-	if (!recv_workqueue)
-		return -ENOMEM;
 
-	if (register_blkdev(NBD_MAJOR, "nbd")) {
-		destroy_workqueue(recv_workqueue);
+	if (register_blkdev(NBD_MAJOR, "nbd"))
 		return -EIO;
-	}
 
 	if (genl_register_family(&nbd_genl_family)) {
 		unregister_blkdev(NBD_MAJOR, "nbd");
-		destroy_workqueue(recv_workqueue);
 		return -EINVAL;
 	}
 	nbd_dbg_init();
@@ -2318,7 +2330,6 @@ static void __exit nbd_cleanup(void)
 
 	idr_destroy(&nbd_index_idr);
 	genl_unregister_family(&nbd_genl_family);
-	destroy_workqueue(recv_workqueue);
 	unregister_blkdev(NBD_MAJOR, "nbd");
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 018/148] PM / devfreq: tegra: Fix kHz to Hz conversion
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (16 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 017/148] nbd: fix max number of supported devs Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 019/148] ASoC: Define a set of DAPM pre/post-up events Greg Kroah-Hartman
                   ` (134 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Steev Klimaszewski, Chanwoo Choi,
	Dmitry Osipenko, Thierry Reding, MyungJoo Ham

From: Dmitry Osipenko <digetx@gmail.com>

commit 62bacb06b9f08965c4ef10e17875450490c948c0 upstream.

The kHz to Hz is incorrectly converted in a few places in the code,
this results in a wrong frequency being calculated because devfreq core
uses OPP frequencies that are given in Hz to clamp the rate, while
tegra-devfreq gives to the core value in kHz and then it also expects to
receive value in kHz from the core. In a result memory freq is always set
to a value which is close to ULONG_MAX because of the bug. Hence the EMC
frequency is always capped to the maximum and the driver doesn't do
anything useful. This patch was tested on Tegra30 and Tegra124 SoC's, EMC
frequency scaling works properly now.

Cc: <stable@vger.kernel.org> # 4.14+
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/devfreq/tegra-devfreq.c |   12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/devfreq/tegra-devfreq.c
+++ b/drivers/devfreq/tegra-devfreq.c
@@ -474,11 +474,11 @@ static int tegra_devfreq_target(struct d
 {
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
 	struct dev_pm_opp *opp;
-	unsigned long rate = *freq * KHZ;
+	unsigned long rate;
 
-	opp = devfreq_recommended_opp(dev, &rate, flags);
+	opp = devfreq_recommended_opp(dev, freq, flags);
 	if (IS_ERR(opp)) {
-		dev_err(dev, "Failed to find opp for %lu KHz\n", *freq);
+		dev_err(dev, "Failed to find opp for %lu Hz\n", *freq);
 		return PTR_ERR(opp);
 	}
 	rate = dev_pm_opp_get_freq(opp);
@@ -487,8 +487,6 @@ static int tegra_devfreq_target(struct d
 	clk_set_min_rate(tegra->emc_clock, rate);
 	clk_set_rate(tegra->emc_clock, 0);
 
-	*freq = rate;
-
 	return 0;
 }
 
@@ -498,7 +496,7 @@ static int tegra_devfreq_get_dev_status(
 	struct tegra_devfreq *tegra = dev_get_drvdata(dev);
 	struct tegra_devfreq_device *actmon_dev;
 
-	stat->current_frequency = tegra->cur_freq;
+	stat->current_frequency = tegra->cur_freq * KHZ;
 
 	/* To be used by the tegra governor */
 	stat->private_data = tegra;
@@ -553,7 +551,7 @@ static int tegra_governor_get_target(str
 		target_freq = max(target_freq, dev->target_freq);
 	}
 
-	*freq = target_freq;
+	*freq = target_freq * KHZ;
 
 	return 0;
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 019/148] ASoC: Define a set of DAPM pre/post-up events
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (17 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 018/148] PM / devfreq: tegra: Fix kHz to Hz conversion Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 020/148] ASoC: sgtl5000: Improve VAG power and mute control Greg Kroah-Hartman
                   ` (133 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Oleksandr Suvorov, Marcel Ziswiler,
	Igor Opaniuk, Fabio Estevam, Mark Brown

From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

commit cfc8f568aada98f9608a0a62511ca18d647613e2 upstream.

Prepare to use SND_SOC_DAPM_PRE_POST_PMU definition to
reduce coming code size and make it more readable.

Cc: stable@vger.kernel.org
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20190719100524.23300-2-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/sound/soc-dapm.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -353,6 +353,8 @@ struct device;
 #define SND_SOC_DAPM_WILL_PMD   0x80    /* called at start of sequence */
 #define SND_SOC_DAPM_PRE_POST_PMD \
 				(SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD)
+#define SND_SOC_DAPM_PRE_POST_PMU \
+				(SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU)
 
 /* convenience event type detection */
 #define SND_SOC_DAPM_EVENT_ON(e)	\



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 020/148] ASoC: sgtl5000: Improve VAG power and mute control
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (18 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 019/148] ASoC: Define a set of DAPM pre/post-up events Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 021/148] powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race Greg Kroah-Hartman
                   ` (132 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Oleksandr Suvorov, Marcel Ziswiler,
	Fabio Estevam, Cezary Rojewski, Mark Brown

From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

commit b1f373a11d25fc9a5f7679c9b85799fe09b0dc4a upstream.

VAG power control is improved to fit the manual [1]. This patch fixes as
minimum one bug: if customer muxes Headphone to Line-In right after boot,
the VAG power remains off that leads to poor sound quality from line-in.

I.e. after boot:
  - Connect sound source to Line-In jack;
  - Connect headphone to HP jack;
  - Run following commands:
  $ amixer set 'Headphone' 80%
  $ amixer set 'Headphone Mux' LINE_IN

Change VAG power on/off control according to the following algorithm:
  - turn VAG power ON on the 1st incoming event.
  - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
  - turn VAG power OFF when there is the latest consumer's pre-down event
    come.
  - always delay after VAG power OFF to avoid pop.
  - delay after VAG power ON if the initiative consumer is Line-In, this
    prevents pop during line-in muxing.

According to the data sheet [1], to avoid any pops/clicks,
the outputs should be muted during input/output
routing changes.

[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf

Cc: stable@vger.kernel.org
Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190719100524.23300-3-oleksandr.suvorov@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/sgtl5000.c |  224 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 194 insertions(+), 30 deletions(-)

--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -31,6 +31,13 @@
 #define SGTL5000_DAP_REG_OFFSET	0x0100
 #define SGTL5000_MAX_REG_OFFSET	0x013A
 
+/* Delay for the VAG ramp up */
+#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
+/* Delay for the VAG ramp down */
+#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
+
+#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
+
 /* default value of sgtl5000 registers */
 static const struct reg_default sgtl5000_reg_defaults[] = {
 	{ SGTL5000_CHIP_DIG_POWER,		0x0000 },
@@ -123,6 +130,13 @@ enum  {
 	I2S_SCLK_STRENGTH_HIGH,
 };
 
+enum {
+	HP_POWER_EVENT,
+	DAC_POWER_EVENT,
+	ADC_POWER_EVENT,
+	LAST_POWER_EVENT = ADC_POWER_EVENT
+};
+
 /* sgtl5000 private structure in codec */
 struct sgtl5000_priv {
 	int sysclk;	/* sysclk rate */
@@ -137,8 +151,109 @@ struct sgtl5000_priv {
 	u8 micbias_voltage;
 	u8 lrclk_strength;
 	u8 sclk_strength;
+	u16 mute_state[LAST_POWER_EVENT + 1];
 };
 
+static inline int hp_sel_input(struct snd_soc_component *component)
+{
+	return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
+		SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
+}
+
+static inline u16 mute_output(struct snd_soc_component *component,
+			      u16 mute_mask)
+{
+	u16 mute_reg = snd_soc_component_read32(component,
+					      SGTL5000_CHIP_ANA_CTRL);
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+			    mute_mask, mute_mask);
+	return mute_reg;
+}
+
+static inline void restore_output(struct snd_soc_component *component,
+				  u16 mute_mask, u16 mute_reg)
+{
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
+		mute_mask, mute_reg);
+}
+
+static void vag_power_on(struct snd_soc_component *component, u32 source)
+{
+	if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
+	    SGTL5000_VAG_POWERUP)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+			    SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
+
+	/* When VAG powering on to get local loop from Line-In, the sleep
+	 * is required to avoid loud pop.
+	 */
+	if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
+	    source == HP_POWER_EVENT)
+		msleep(SGTL5000_VAG_POWERUP_DELAY);
+}
+
+static int vag_power_consumers(struct snd_soc_component *component,
+			       u16 ana_pwr_reg, u32 source)
+{
+	int consumers = 0;
+
+	/* count dac/adc consumers unconditional */
+	if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
+		consumers++;
+	if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
+		consumers++;
+
+	/*
+	 * If the event comes from HP and Line-In is selected,
+	 * current action is 'DAC to be powered down'.
+	 * As HP_POWERUP is not set when HP muxed to line-in,
+	 * we need to keep VAG power ON.
+	 */
+	if (source == HP_POWER_EVENT) {
+		if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
+			consumers++;
+	} else {
+		if (ana_pwr_reg & SGTL5000_HP_POWERUP)
+			consumers++;
+	}
+
+	return consumers;
+}
+
+static void vag_power_off(struct snd_soc_component *component, u32 source)
+{
+	u16 ana_pwr = snd_soc_component_read32(component,
+					     SGTL5000_CHIP_ANA_POWER);
+
+	if (!(ana_pwr & SGTL5000_VAG_POWERUP))
+		return;
+
+	/*
+	 * This function calls when any of VAG power consumers is disappearing.
+	 * Thus, if there is more than one consumer at the moment, as minimum
+	 * one consumer will definitely stay after the end of the current
+	 * event.
+	 * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
+	 * - LINE_IN (for HP events) / HP (for DAC/ADC events)
+	 * - DAC
+	 * - ADC
+	 * (the current consumer is disappearing right now)
+	 */
+	if (vag_power_consumers(component, ana_pwr, source) >= 2)
+		return;
+
+	snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
+		SGTL5000_VAG_POWERUP, 0);
+	/* In power down case, we need wait 400-1000 ms
+	 * when VAG fully ramped down.
+	 * As longer we wait, as smaller pop we've got.
+	 */
+	msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+}
+
 /*
  * mic_bias power on/off share the same register bits with
  * output impedance of mic bias, when power on mic bias, we
@@ -170,36 +285,46 @@ static int mic_bias_event(struct snd_soc
 	return 0;
 }
 
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
-	struct snd_kcontrol *kcontrol, int event)
+static int vag_and_mute_control(struct snd_soc_component *component,
+				 int event, int event_source)
 {
-	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
+	static const u16 mute_mask[] = {
+		/*
+		 * Mask for HP_POWER_EVENT.
+		 * Muxing Headphones have to be wrapped with mute/unmute
+		 * headphones only.
+		 */
+		SGTL5000_HP_MUTE,
+		/*
+		 * Masks for DAC_POWER_EVENT/ADC_POWER_EVENT.
+		 * Muxing DAC or ADC block have to wrapped with mute/unmute
+		 * both headphones and line-out.
+		 */
+		SGTL5000_OUTPUTS_MUTE,
+		SGTL5000_OUTPUTS_MUTE
+	};
+
+	struct sgtl5000_priv *sgtl5000 =
+		snd_soc_component_get_drvdata(component);
 
 	switch (event) {
+	case SND_SOC_DAPM_PRE_PMU:
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		break;
 	case SND_SOC_DAPM_POST_PMU:
-		snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
-			SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
-		msleep(400);
+		vag_power_on(component, event_source);
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
 		break;
-
 	case SND_SOC_DAPM_PRE_PMD:
-		/*
-		 * Don't clear VAG_POWERUP, when both DAC and ADC are
-		 * operational to prevent inadvertently starving the
-		 * other one of them.
-		 */
-		if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
-				mask) != mask) {
-			snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
-				SGTL5000_VAG_POWERUP, 0);
-			msleep(400);
-		}
+		sgtl5000->mute_state[event_source] =
+			mute_output(component, mute_mask[event_source]);
+		vag_power_off(component, event_source);
+		break;
+	case SND_SOC_DAPM_POST_PMD:
+		restore_output(component, mute_mask[event_source],
+			       sgtl5000->mute_state[event_source]);
 		break;
 	default:
 		break;
@@ -208,6 +333,41 @@ static int power_vag_event(struct snd_so
 	return 0;
 }
 
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, HP_POWER_EVENT);
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, ADC_POWER_EVENT);
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+	struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component =
+		snd_soc_dapm_to_component(w->dapm);
+
+	return vag_and_mute_control(component, event, DAC_POWER_EVENT);
+}
+
 /* input sources for ADC */
 static const char *adc_mux_text[] = {
 	"MIC_IN", "LINE_IN"
@@ -280,7 +440,10 @@ static const struct snd_soc_dapm_widget
 			    mic_bias_event,
 			    SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 
-	SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
+	SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
+			   headphone_pga_event,
+			   SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
 	SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
 
 	SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
@@ -301,11 +464,12 @@ static const struct snd_soc_dapm_widget
 				0, SGTL5000_CHIP_DIG_POWER,
 				1, 0),
 
-	SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
-	SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
-
-	SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
-	SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
+	SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
+			   adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
+	SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
+			   dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
+			   SND_SOC_DAPM_PRE_POST_PMD),
 };
 
 /* routes for sgtl5000 */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 021/148] powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (19 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 020/148] ASoC: sgtl5000: Improve VAG power and mute control Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 022/148] powerpc/mce: Fix MCE handling for huge pages Greg Kroah-Hartman
                   ` (131 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Paul Mackerras, Michael Ellerman

From: Paul Mackerras <paulus@ozlabs.org>

commit da15c03b047dca891d37b9f4ef9ca14d84a6484f upstream.

Testing has revealed the existence of a race condition where a XIVE
interrupt being shut down can be in one of the XIVE interrupt queues
(of which there are up to 8 per CPU, one for each priority) at the
point where free_irq() is called.  If this happens, can return an
interrupt number which has been shut down.  This can lead to various
symptoms:

- irq_to_desc(irq) can be NULL.  In this case, no end-of-interrupt
  function gets called, resulting in the CPU's elevated interrupt
  priority (numerically lowered CPPR) never gets reset.  That then
  means that the CPU stops processing interrupts, causing device
  timeouts and other errors in various device drivers.

- The irq descriptor or related data structures can be in the process
  of being freed as the interrupt code is using them.  This typically
  leads to crashes due to bad pointer dereferences.

This race is basically what commit 62e0468650c3 ("genirq: Add optional
hardware synchronization for shutdown", 2019-06-28) is intended to
fix, given a get_irqchip_state() method for the interrupt controller
being used.  It works by polling the interrupt controller when an
interrupt is being freed until the controller says it is not pending.

With XIVE, the PQ bits of the interrupt source indicate the state of
the interrupt source, and in particular the P bit goes from 0 to 1 at
the point where the hardware writes an entry into the interrupt queue
that this interrupt is directed towards.  Normally, the code will then
process the interrupt and do an end-of-interrupt (EOI) operation which
will reset PQ to 00 (assuming another interrupt hasn't been generated
in the meantime).  However, there are situations where the code resets
P even though a queue entry exists (for example, by setting PQ to 01,
which disables the interrupt source), and also situations where the
code leaves P at 1 after removing the queue entry (for example, this
is done for escalation interrupts so they cannot fire again until
they are explicitly re-enabled).

The code already has a 'saved_p' flag for the interrupt source which
indicates that a queue entry exists, although it isn't maintained
consistently.  This patch adds a 'stale_p' flag to indicate that
P has been left at 1 after processing a queue entry, and adds code
to set and clear saved_p and stale_p as necessary to maintain a
consistent indication of whether a queue entry may or may not exist.

With this, we can implement xive_get_irqchip_state() by looking at
stale_p, saved_p and the ESB PQ bits for the interrupt.

There is some additional code to handle escalation interrupts
properly; because they are enabled and disabled in KVM assembly code,
which does not have access to the xive_irq_data struct for the
escalation interrupt.  Hence, stale_p may be incorrect when the
escalation interrupt is freed in kvmppc_xive_{,native_}cleanup_vcpu().
Fortunately, we can fix it up by looking at vcpu->arch.xive_esc_on,
with some careful attention to barriers in order to ensure the correct
result if xive_esc_irq() races with kvmppc_xive_cleanup_vcpu().

Finally, this adds code to make noise on the console (pr_crit and
WARN_ON(1)) if we find an interrupt queue entry for an interrupt
which does not have a descriptor.  While this won't catch the race
reliably, if it does get triggered it will be an indication that
the race is occurring and needs to be debugged.

Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190813100648.GE9567@blackberry
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/xive.h       |    8 +++
 arch/powerpc/kvm/book3s_xive.c        |   31 ++++++++++++
 arch/powerpc/kvm/book3s_xive.h        |    2 
 arch/powerpc/kvm/book3s_xive_native.c |    3 +
 arch/powerpc/sysdev/xive/common.c     |   87 +++++++++++++++++++++++++---------
 5 files changed, 108 insertions(+), 23 deletions(-)

--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -46,7 +46,15 @@ struct xive_irq_data {
 
 	/* Setup/used by frontend */
 	int target;
+	/*
+	 * saved_p means that there is a queue entry for this interrupt
+	 * in some CPU's queue (not including guest vcpu queues), even
+	 * if P is not set in the source ESB.
+	 * stale_p means that there is no queue entry for this interrupt
+	 * in some CPU's queue, even if P is set in the source ESB.
+	 */
 	bool saved_p;
+	bool stale_p;
 };
 #define XIVE_IRQ_FLAG_STORE_EOI	0x01
 #define XIVE_IRQ_FLAG_LSI	0x02
--- a/arch/powerpc/kvm/book3s_xive.c
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -166,6 +166,9 @@ static irqreturn_t xive_esc_irq(int irq,
 	 */
 	vcpu->arch.xive_esc_on = false;
 
+	/* This orders xive_esc_on = false vs. subsequent stale_p = true */
+	smp_wmb();	/* goes with smp_mb() in cleanup_single_escalation */
+
 	return IRQ_HANDLED;
 }
 
@@ -1119,6 +1122,31 @@ void kvmppc_xive_disable_vcpu_interrupts
 	vcpu->arch.xive_esc_raddr = 0;
 }
 
+/*
+ * In single escalation mode, the escalation interrupt is marked so
+ * that EOI doesn't re-enable it, but just sets the stale_p flag to
+ * indicate that the P bit has already been dealt with.  However, the
+ * assembly code that enters the guest sets PQ to 00 without clearing
+ * stale_p (because it has no easy way to address it).  Hence we have
+ * to adjust stale_p before shutting down the interrupt.
+ */
+void xive_cleanup_single_escalation(struct kvm_vcpu *vcpu,
+				    struct kvmppc_xive_vcpu *xc, int irq)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+
+	/*
+	 * This slightly odd sequence gives the right result
+	 * (i.e. stale_p set if xive_esc_on is false) even if
+	 * we race with xive_esc_irq() and xive_irq_eoi().
+	 */
+	xd->stale_p = false;
+	smp_mb();		/* paired with smb_wmb in xive_esc_irq */
+	if (!vcpu->arch.xive_esc_on)
+		xd->stale_p = true;
+}
+
 void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu)
 {
 	struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
@@ -1143,6 +1171,9 @@ void kvmppc_xive_cleanup_vcpu(struct kvm
 	/* Free escalations */
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		if (xc->esc_virq[i]) {
+			if (xc->xive->single_escalation)
+				xive_cleanup_single_escalation(vcpu, xc,
+							xc->esc_virq[i]);
 			free_irq(xc->esc_virq[i], vcpu);
 			irq_dispose_mapping(xc->esc_virq[i]);
 			kfree(xc->esc_virq_names[i]);
--- a/arch/powerpc/kvm/book3s_xive.h
+++ b/arch/powerpc/kvm/book3s_xive.h
@@ -282,6 +282,8 @@ int kvmppc_xive_select_target(struct kvm
 int kvmppc_xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio,
 				  bool single_escalation);
 struct kvmppc_xive *kvmppc_xive_get_device(struct kvm *kvm, u32 type);
+void xive_cleanup_single_escalation(struct kvm_vcpu *vcpu,
+				    struct kvmppc_xive_vcpu *xc, int irq);
 
 #endif /* CONFIG_KVM_XICS */
 #endif /* _KVM_PPC_BOOK3S_XICS_H */
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -71,6 +71,9 @@ void kvmppc_xive_native_cleanup_vcpu(str
 	for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
 		/* Free the escalation irq */
 		if (xc->esc_virq[i]) {
+			if (xc->xive->single_escalation)
+				xive_cleanup_single_escalation(vcpu, xc,
+							xc->esc_virq[i]);
 			free_irq(xc->esc_virq[i], vcpu);
 			irq_dispose_mapping(xc->esc_virq[i]);
 			kfree(xc->esc_virq_names[i]);
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -135,7 +135,7 @@ static u32 xive_read_eq(struct xive_q *q
 static u32 xive_scan_interrupts(struct xive_cpu *xc, bool just_peek)
 {
 	u32 irq = 0;
-	u8 prio;
+	u8 prio = 0;
 
 	/* Find highest pending priority */
 	while (xc->pending_prio != 0) {
@@ -148,8 +148,19 @@ static u32 xive_scan_interrupts(struct x
 		irq = xive_read_eq(&xc->queue[prio], just_peek);
 
 		/* Found something ? That's it */
-		if (irq)
-			break;
+		if (irq) {
+			if (just_peek || irq_to_desc(irq))
+				break;
+			/*
+			 * We should never get here; if we do then we must
+			 * have failed to synchronize the interrupt properly
+			 * when shutting it down.
+			 */
+			pr_crit("xive: got interrupt %d without descriptor, dropping\n",
+				irq);
+			WARN_ON(1);
+			continue;
+		}
 
 		/* Clear pending bits */
 		xc->pending_prio &= ~(1 << prio);
@@ -307,6 +318,7 @@ static void xive_do_queue_eoi(struct xiv
  */
 static void xive_do_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
 {
+	xd->stale_p = false;
 	/* If the XIVE supports the new "store EOI facility, use it */
 	if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
 		xive_esb_write(xd, XIVE_ESB_STORE_EOI, 0);
@@ -350,7 +362,7 @@ static void xive_do_source_eoi(u32 hw_ir
 	}
 }
 
-/* irq_chip eoi callback */
+/* irq_chip eoi callback, called with irq descriptor lock held */
 static void xive_irq_eoi(struct irq_data *d)
 {
 	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
@@ -366,6 +378,8 @@ static void xive_irq_eoi(struct irq_data
 	if (!irqd_irq_disabled(d) && !irqd_is_forwarded_to_vcpu(d) &&
 	    !(xd->flags & XIVE_IRQ_NO_EOI))
 		xive_do_source_eoi(irqd_to_hwirq(d), xd);
+	else
+		xd->stale_p = true;
 
 	/*
 	 * Clear saved_p to indicate that it's no longer occupying
@@ -397,11 +411,16 @@ static void xive_do_source_set_mask(stru
 	 */
 	if (mask) {
 		val = xive_esb_read(xd, XIVE_ESB_SET_PQ_01);
-		xd->saved_p = !!(val & XIVE_ESB_VAL_P);
-	} else if (xd->saved_p)
+		if (!xd->stale_p && !!(val & XIVE_ESB_VAL_P))
+			xd->saved_p = true;
+		xd->stale_p = false;
+	} else if (xd->saved_p) {
 		xive_esb_read(xd, XIVE_ESB_SET_PQ_10);
-	else
+		xd->saved_p = false;
+	} else {
 		xive_esb_read(xd, XIVE_ESB_SET_PQ_00);
+		xd->stale_p = false;
+	}
 }
 
 /*
@@ -541,6 +560,8 @@ static unsigned int xive_irq_startup(str
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 	int target, rc;
 
+	xd->saved_p = false;
+	xd->stale_p = false;
 	pr_devel("xive_irq_startup: irq %d [0x%x] data @%p\n",
 		 d->irq, hw_irq, d);
 
@@ -587,6 +608,7 @@ static unsigned int xive_irq_startup(str
 	return 0;
 }
 
+/* called with irq descriptor lock held */
 static void xive_irq_shutdown(struct irq_data *d)
 {
 	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
@@ -602,16 +624,6 @@ static void xive_irq_shutdown(struct irq
 	xive_do_source_set_mask(xd, true);
 
 	/*
-	 * The above may have set saved_p. We clear it otherwise it
-	 * will prevent re-enabling later on. It is ok to forget the
-	 * fact that the interrupt might be in a queue because we are
-	 * accounting that already in xive_dec_target_count() and will
-	 * be re-routing it to a new queue with proper accounting when
-	 * it's started up again
-	 */
-	xd->saved_p = false;
-
-	/*
 	 * Mask the interrupt in HW in the IVT/EAS and set the number
 	 * to be the "bad" IRQ number
 	 */
@@ -797,6 +809,10 @@ static int xive_irq_retrigger(struct irq
 	return 1;
 }
 
+/*
+ * Caller holds the irq descriptor lock, so this won't be called
+ * concurrently with xive_get_irqchip_state on the same interrupt.
+ */
 static int xive_irq_set_vcpu_affinity(struct irq_data *d, void *state)
 {
 	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
@@ -820,6 +836,10 @@ static int xive_irq_set_vcpu_affinity(st
 
 		/* Set it to PQ=10 state to prevent further sends */
 		pq = xive_esb_read(xd, XIVE_ESB_SET_PQ_10);
+		if (!xd->stale_p) {
+			xd->saved_p = !!(pq & XIVE_ESB_VAL_P);
+			xd->stale_p = !xd->saved_p;
+		}
 
 		/* No target ? nothing to do */
 		if (xd->target == XIVE_INVALID_TARGET) {
@@ -827,7 +847,7 @@ static int xive_irq_set_vcpu_affinity(st
 			 * An untargetted interrupt should have been
 			 * also masked at the source
 			 */
-			WARN_ON(pq & 2);
+			WARN_ON(xd->saved_p);
 
 			return 0;
 		}
@@ -847,9 +867,8 @@ static int xive_irq_set_vcpu_affinity(st
 		 * This saved_p is cleared by the host EOI, when we know
 		 * for sure the queue slot is no longer in use.
 		 */
-		if (pq & 2) {
-			pq = xive_esb_read(xd, XIVE_ESB_SET_PQ_11);
-			xd->saved_p = true;
+		if (xd->saved_p) {
+			xive_esb_read(xd, XIVE_ESB_SET_PQ_11);
 
 			/*
 			 * Sync the XIVE source HW to ensure the interrupt
@@ -862,8 +881,7 @@ static int xive_irq_set_vcpu_affinity(st
 			 */
 			if (xive_ops->sync_source)
 				xive_ops->sync_source(hw_irq);
-		} else
-			xd->saved_p = false;
+		}
 	} else {
 		irqd_clr_forwarded_to_vcpu(d);
 
@@ -914,6 +932,23 @@ static int xive_irq_set_vcpu_affinity(st
 	return 0;
 }
 
+/* Called with irq descriptor lock held. */
+static int xive_get_irqchip_state(struct irq_data *data,
+				  enum irqchip_irq_state which, bool *state)
+{
+	struct xive_irq_data *xd = irq_data_get_irq_handler_data(data);
+
+	switch (which) {
+	case IRQCHIP_STATE_ACTIVE:
+		*state = !xd->stale_p &&
+			 (xd->saved_p ||
+			  !!(xive_esb_read(xd, XIVE_ESB_GET) & XIVE_ESB_VAL_P));
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
 static struct irq_chip xive_irq_chip = {
 	.name = "XIVE-IRQ",
 	.irq_startup = xive_irq_startup,
@@ -925,6 +960,7 @@ static struct irq_chip xive_irq_chip = {
 	.irq_set_type = xive_irq_set_type,
 	.irq_retrigger = xive_irq_retrigger,
 	.irq_set_vcpu_affinity = xive_irq_set_vcpu_affinity,
+	.irq_get_irqchip_state = xive_get_irqchip_state,
 };
 
 bool is_xive_irq(struct irq_chip *chip)
@@ -1338,6 +1374,11 @@ static void xive_flush_cpu_queue(unsigne
 		xd = irq_desc_get_handler_data(desc);
 
 		/*
+		 * Clear saved_p to indicate that it's no longer pending
+		 */
+		xd->saved_p = false;
+
+		/*
 		 * For LSIs, we EOI, this will cause a resend if it's
 		 * still asserted. Otherwise do an MSI retrigger.
 		 */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 022/148] powerpc/mce: Fix MCE handling for huge pages
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (20 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 021/148] powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 023/148] powerpc/mce: Schedule work from irq_work Greg Kroah-Hartman
                   ` (130 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Balbir Singh, Reza Arbab,
	Mahesh Salgaonkar, Santosh Sivaraj, Michael Ellerman

From: Balbir Singh <bsingharora@gmail.com>

commit 99ead78afd1128bfcebe7f88f3b102fb2da09aee upstream.

The current code would fail on huge pages addresses, since the shift would
be incorrect. Use the correct page shift value returned by
__find_linux_pte() to get the correct physical address. The code is more
generic and can handle both regular and compound pages.

Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors")
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[arbab@linux.ibm.com: Fixup pseries_do_memory_failure()]
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820081352.8641-3-santosh@fossix.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/mce_power.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -26,6 +26,7 @@
 unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr)
 {
 	pte_t *ptep;
+	unsigned int shift;
 	unsigned long flags;
 	struct mm_struct *mm;
 
@@ -35,13 +36,18 @@ unsigned long addr_to_pfn(struct pt_regs
 		mm = &init_mm;
 
 	local_irq_save(flags);
-	if (mm == current->mm)
-		ptep = find_current_mm_pte(mm->pgd, addr, NULL, NULL);
-	else
-		ptep = find_init_mm_pte(addr, NULL);
+	ptep = __find_linux_pte(mm->pgd, addr, NULL, &shift);
 	local_irq_restore(flags);
+
 	if (!ptep || pte_special(*ptep))
 		return ULONG_MAX;
+
+	if (shift > PAGE_SHIFT) {
+		unsigned long rpnmask = (1ul << shift) - PAGE_SIZE;
+
+		return pte_pfn(__pte(pte_val(*ptep) | (addr & rpnmask)));
+	}
+
 	return pte_pfn(*ptep);
 }
 
@@ -344,7 +350,7 @@ static const struct mce_derror_table mce
   MCE_INITIATOR_CPU,   MCE_SEV_SEVERE, true },
 { 0, false, 0, 0, 0, 0, 0 } };
 
-static int mce_find_instr_ea_and_pfn(struct pt_regs *regs, uint64_t *addr,
+static int mce_find_instr_ea_and_phys(struct pt_regs *regs, uint64_t *addr,
 					uint64_t *phys_addr)
 {
 	/*
@@ -541,7 +547,8 @@ static int mce_handle_derror(struct pt_r
 			 * kernel/exception-64s.h
 			 */
 			if (get_paca()->in_mce < MAX_MCE_DEPTH)
-				mce_find_instr_ea_and_pfn(regs, addr, phys_addr);
+				mce_find_instr_ea_and_phys(regs, addr,
+							   phys_addr);
 		}
 		found = 1;
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 023/148] powerpc/mce: Schedule work from irq_work
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (21 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 022/148] powerpc/mce: Fix MCE handling for huge pages Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 024/148] powerpc/603: Fix handling of the DIRTY flag Greg Kroah-Hartman
                   ` (129 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mahesh Salgaonkar, Nicholas Piggin,
	Balbir Singh, Santosh Sivaraj, Michael Ellerman

From: Santosh Sivaraj <santosh@fossix.org>

commit b5bda6263cad9a927e1a4edb7493d542da0c1410 upstream.

schedule_work() cannot be called from MCE exception context as MCE can
interrupt even in interrupt disabled context.

Fixes: 733e4a4c4467 ("powerpc/mce: hookup memory_failure for UE errors")
Cc: stable@vger.kernel.org # v4.15+
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190820081352.8641-2-santosh@fossix.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/mce.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -33,6 +33,7 @@ static DEFINE_PER_CPU(struct machine_che
 					mce_ue_event_queue);
 
 static void machine_check_process_queued_event(struct irq_work *work);
+static void machine_check_ue_irq_work(struct irq_work *work);
 void machine_check_ue_event(struct machine_check_event *evt);
 static void machine_process_ue_event(struct work_struct *work);
 
@@ -40,6 +41,10 @@ static struct irq_work mce_event_process
         .func = machine_check_process_queued_event,
 };
 
+static struct irq_work mce_ue_event_irq_work = {
+	.func = machine_check_ue_irq_work,
+};
+
 DECLARE_WORK(mce_ue_event_work, machine_process_ue_event);
 
 static void mce_set_error_info(struct machine_check_event *mce,
@@ -199,6 +204,10 @@ void release_mce_event(void)
 	get_mce_event(NULL, true);
 }
 
+static void machine_check_ue_irq_work(struct irq_work *work)
+{
+	schedule_work(&mce_ue_event_work);
+}
 
 /*
  * Queue up the MCE event which then can be handled later.
@@ -216,7 +225,7 @@ void machine_check_ue_event(struct machi
 	memcpy(this_cpu_ptr(&mce_ue_event_queue[index]), evt, sizeof(*evt));
 
 	/* Queue work to process this event later. */
-	schedule_work(&mce_ue_event_work);
+	irq_work_queue(&mce_ue_event_irq_work);
 }
 
 /*



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 024/148] powerpc/603: Fix handling of the DIRTY flag
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (22 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 023/148] powerpc/mce: Schedule work from irq_work Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 025/148] powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN Greg Kroah-Hartman
                   ` (128 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Doug Crawford, Christophe Leroy,
	Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 415480dce2ef03bb8335deebd2f402f475443ce0 upstream.

If a page is already mapped RW without the DIRTY flag, the DIRTY
flag is never set and a TLB store miss exception is taken forever.

This is easily reproduced with the following app:

void main(void)
{
	volatile char *ptr = mmap(0, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0);

	*ptr = *ptr;
}

When DIRTY flag is not set, bail out of TLB miss handler and take
a minor page fault which will set the DIRTY flag.

Fixes: f8b58c64eaef ("powerpc/603: let's handle PAGE_DIRTY directly")
Cc: stable@vger.kernel.org # v5.1+
Reported-by: Doug Crawford <doug.crawford@intelight-its.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80432f71194d7ee75b2f5043ecf1501cf1cca1f3.1566196646.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/head_32.S |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -557,9 +557,9 @@ DataStoreTLBMiss:
 	cmplw	0,r1,r3
 	mfspr	r2, SPRN_SPRG_PGDIR
 #ifdef CONFIG_SWAP
-	li	r1, _PAGE_RW | _PAGE_PRESENT | _PAGE_ACCESSED
+	li	r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT | _PAGE_ACCESSED
 #else
-	li	r1, _PAGE_RW | _PAGE_PRESENT
+	li	r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT
 #endif
 	bge-	112f
 	lis	r2, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 025/148] powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN.
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (23 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 024/148] powerpc/603: Fix handling of the DIRTY flag Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 026/148] powerpc/ptdump: Fix addresses display on PPC32 Greg Kroah-Hartman
                   ` (127 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jonathan Neuschafer,
	Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 9d6d712fbf7766f21c838940eebcd7b4d476c5e6 upstream.

When KASAN is selected, the definitive hash table has to be
set up later, but there is already an early temporary one.

When KASAN is not selected, there is no early hash table,
so the setup of the definitive hash table cannot be delayed.

Fixes: 72f208c6a8f7 ("powerpc/32s: move hash code patching out of MMU_init_hw()")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Jonathan Neuschafer <j.neuschaefer@gmx.net>
Tested-by: Jonathan Neuschafer <j.neuschaefer@gmx.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b7860c5e1e784d6b96ba67edf47dd6cbc2e78ab6.1565776892.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/head_32.S  |    2 ++
 arch/powerpc/mm/book3s32/mmu.c |    9 +++++++++
 2 files changed, 11 insertions(+)

--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -897,9 +897,11 @@ start_here:
 	bl	machine_init
 	bl	__save_cpu_setup
 	bl	MMU_init
+#ifdef CONFIG_KASAN
 BEGIN_MMU_FTR_SECTION
 	bl	MMU_init_hw_patch
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
+#endif
 
 /*
  * Go back to running unmapped so we can load up new values
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -358,6 +358,15 @@ void __init MMU_init_hw(void)
 	hash_mb2 = hash_mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
 	if (lg_n_hpteg > 16)
 		hash_mb2 = 16 - LG_HPTEG_SIZE;
+
+	/*
+	 * When KASAN is selected, there is already an early temporary hash
+	 * table and the switch to the final hash table is done later.
+	 */
+	if (IS_ENABLED(CONFIG_KASAN))
+		return;
+
+	MMU_init_hw_patch();
 }
 
 void __init MMU_init_hw_patch(void)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 026/148] powerpc/ptdump: Fix addresses display on PPC32
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (24 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 025/148] powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 027/148] powerpc/powernv: Restrict OPAL symbol map to only be readable by root Greg Kroah-Hartman
                   ` (126 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 7c7a532ba3fc51bf9527d191fb410786c1fdc73c upstream.

Commit 453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot")
wrongly changed KERN_VIRT_START from 0 to PAGE_OFFSET, leading to a
shift in the displayed addresses.

Lets revert that change to resync walk_pagetables()'s addr val and
pgd_t pointer for PPC32.

Fixes: 453d87f6a8ae ("powerpc/mm: Warn if W+X pages found on boot")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/eb4d626514e22f85814830012642329018ef6af9.1565786091.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/ptdump/ptdump.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/mm/ptdump/ptdump.c
+++ b/arch/powerpc/mm/ptdump/ptdump.c
@@ -27,7 +27,7 @@
 #include "ptdump.h"
 
 #ifdef CONFIG_PPC32
-#define KERN_VIRT_START	PAGE_OFFSET
+#define KERN_VIRT_START	0
 #endif
 
 /*



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 027/148] powerpc/powernv: Restrict OPAL symbol map to only be readable by root
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (25 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 026/148] powerpc/ptdump: Fix addresses display on PPC32 Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 028/148] powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt() Greg Kroah-Hartman
                   ` (125 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michael Ellerman, Andrew Donnellan

From: Andrew Donnellan <ajd@linux.ibm.com>

commit e7de4f7b64c23e503a8c42af98d56f2a7462bd6d upstream.

Currently the OPAL symbol map is globally readable, which seems bad as
it contains physical addresses.

Restrict it to root.

Fixes: c8742f85125d ("powerpc/powernv: Expose OPAL firmware symbol map")
Cc: stable@vger.kernel.org # v3.19+
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190503075253.22798-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/opal.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -705,7 +705,10 @@ static ssize_t symbol_map_read(struct fi
 				       bin_attr->size);
 }
 
-static BIN_ATTR_RO(symbol_map, 0);
+static struct bin_attribute symbol_map_attr = {
+	.attr = {.name = "symbol_map", .mode = 0400},
+	.read = symbol_map_read
+};
 
 static void opal_export_symmap(void)
 {
@@ -722,10 +725,10 @@ static void opal_export_symmap(void)
 		return;
 
 	/* Setup attributes */
-	bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0]));
-	bin_attr_symbol_map.size = be64_to_cpu(syms[1]);
+	symbol_map_attr.private = __va(be64_to_cpu(syms[0]));
+	symbol_map_attr.size = be64_to_cpu(syms[1]);
 
-	rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map);
+	rc = sysfs_create_bin_file(opal_kobj, &symbol_map_attr);
 	if (rc)
 		pr_warn("Error %d creating OPAL symbols file\n", rc);
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 028/148] powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (26 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 027/148] powerpc/powernv: Restrict OPAL symbol map to only be readable by root Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 029/148] powerpc/powernv/ioda: Fix race in TCE level allocation Greg Kroah-Hartman
                   ` (124 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aneesh Kumar K.V, Gautham R. Shenoy,
	Michael Ellerman

From: Gautham R. Shenoy <ego@linux.vnet.ibm.com>

commit c784be435d5dae28d3b03db31753dd7a18733f0c upstream.

The calls to arch_add_memory()/arch_remove_memory() are always made
with the read-side cpu_hotplug_lock acquired via memory_hotplug_begin().
On pSeries, arch_add_memory()/arch_remove_memory() eventually call
resize_hpt() which in turn calls stop_machine() which acquires the
read-side cpu_hotplug_lock again, thereby resulting in the recursive
acquisition of this lock.

In the absence of CONFIG_PROVE_LOCKING, we hadn't observed a system
lockup during a memory hotplug operation because cpus_read_lock() is a
per-cpu rwsem read, which, in the fast-path (in the absence of the
writer, which in our case is a CPU-hotplug operation) simply
increments the read_count on the semaphore. Thus a recursive read in
the fast-path doesn't cause any problems.

However, we can hit this problem in practice if there is a concurrent
CPU-Hotplug operation in progress which is waiting to acquire the
write-side of the lock. This will cause the second recursive read to
block until the writer finishes. While the writer is blocked since the
first read holds the lock. Thus both the reader as well as the writers
fail to make any progress thereby blocking both CPU-Hotplug as well as
Memory Hotplug operations.

Memory-Hotplug				CPU-Hotplug
CPU 0					CPU 1
------                                  ------

1. down_read(cpu_hotplug_lock.rw_sem)
   [memory_hotplug_begin]
					2. down_write(cpu_hotplug_lock.rw_sem)
					[cpu_up/cpu_down]
3. down_read(cpu_hotplug_lock.rw_sem)
   [stop_machine()]

Lockdep complains as follows in these code-paths.

 swapper/0/1 is trying to acquire lock:
 (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: stop_machine+0x2c/0x60

but task is already holding lock:
(____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(cpu_hotplug_lock.rw_sem);
   lock(cpu_hotplug_lock.rw_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 3 locks held by swapper/0/1:
  #0: (____ptrval____) (&dev->mutex){....}, at: __driver_attach+0x12c/0x1b0
  #1: (____ptrval____) (cpu_hotplug_lock.rw_sem){++++}, at: mem_hotplug_begin+0x20/0x50
  #2: (____ptrval____) (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x54/0x1a0

stack backtrace:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc5-58373-gbc99402235f3-dirty #166
 Call Trace:
   dump_stack+0xe8/0x164 (unreliable)
   __lock_acquire+0x1110/0x1c70
   lock_acquire+0x240/0x290
   cpus_read_lock+0x64/0xf0
   stop_machine+0x2c/0x60
   pseries_lpar_resize_hpt+0x19c/0x2c0
   resize_hpt_for_hotplug+0x70/0xd0
   arch_add_memory+0x58/0xfc
   devm_memremap_pages+0x5e8/0x8f0
   pmem_attach_disk+0x764/0x830
   nvdimm_bus_probe+0x118/0x240
   really_probe+0x230/0x4b0
   driver_probe_device+0x16c/0x1e0
   __driver_attach+0x148/0x1b0
   bus_for_each_dev+0x90/0x130
   driver_attach+0x34/0x50
   bus_add_driver+0x1a8/0x360
   driver_register+0x108/0x170
   __nd_driver_register+0xd0/0xf0
   nd_pmem_driver_init+0x34/0x48
   do_one_initcall+0x1e0/0x45c
   kernel_init_freeable+0x540/0x64c
   kernel_init+0x2c/0x160
   ret_from_kernel_thread+0x5c/0x68

Fix this issue by
  1) Requiring all the calls to pseries_lpar_resize_hpt() be made
     with cpu_hotplug_lock held.

  2) In pseries_lpar_resize_hpt() invoke stop_machine_cpuslocked()
     as a consequence of 1)

  3) To satisfy 1), in hpt_order_set(), call mmu_hash_ops.resize_hpt()
     with cpu_hotplug_lock held.

Fixes: dbcf929c0062 ("powerpc/pseries: Add support for hash table resizing")
Cc: stable@vger.kernel.org # v4.11+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1557906352-29048-1-git-send-email-ego@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/book3s64/hash_utils.c |    9 ++++++++-
 arch/powerpc/platforms/pseries/lpar.c |    8 ++++++--
 2 files changed, 14 insertions(+), 3 deletions(-)

--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -34,6 +34,7 @@
 #include <linux/libfdt.h>
 #include <linux/pkeys.h>
 #include <linux/hugetlb.h>
+#include <linux/cpu.h>
 
 #include <asm/debugfs.h>
 #include <asm/processor.h>
@@ -1931,10 +1932,16 @@ static int hpt_order_get(void *data, u64
 
 static int hpt_order_set(void *data, u64 val)
 {
+	int ret;
+
 	if (!mmu_hash_ops.resize_hpt)
 		return -ENODEV;
 
-	return mmu_hash_ops.resize_hpt(val);
+	cpus_read_lock();
+	ret = mmu_hash_ops.resize_hpt(val);
+	cpus_read_unlock();
+
+	return ret;
 }
 
 DEFINE_DEBUGFS_ATTRIBUTE(fops_hpt_order, hpt_order_get, hpt_order_set, "%llu\n");
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -1413,7 +1413,10 @@ static int pseries_lpar_resize_hpt_commi
 	return 0;
 }
 
-/* Must be called in user context */
+/*
+ * Must be called in process context. The caller must hold the
+ * cpus_lock.
+ */
 static int pseries_lpar_resize_hpt(unsigned long shift)
 {
 	struct hpt_resize_state state = {
@@ -1467,7 +1470,8 @@ static int pseries_lpar_resize_hpt(unsig
 
 	t1 = ktime_get();
 
-	rc = stop_machine(pseries_lpar_resize_hpt_commit, &state, NULL);
+	rc = stop_machine_cpuslocked(pseries_lpar_resize_hpt_commit,
+				     &state, NULL);
 
 	t2 = ktime_get();
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 029/148] powerpc/powernv/ioda: Fix race in TCE level allocation
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (27 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 028/148] powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt() Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 030/148] powerpc/kasan: Fix parallel loading of modules Greg Kroah-Hartman
                   ` (123 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexey Kardashevskiy, Michael Ellerman

From: Alexey Kardashevskiy <aik@ozlabs.ru>

commit 56090a3902c80c296e822d11acdb6a101b322c52 upstream.

pnv_tce() returns a pointer to a TCE entry and originally a TCE table
would be pre-allocated. For the default case of 2GB window the table
needs only a single level and that is fine. However if more levels are
requested, it is possible to get a race when 2 threads want a pointer
to a TCE entry from the same page of TCEs.

This adds cmpxchg to handle the race. Note that once TCE is non-zero,
it cannot become zero again.

Fixes: a68bd1267b72 ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
CC: stable@vger.kernel.org # v4.19+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-2-aik@ozlabs.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/pci-ioda-tce.c |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

--- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
@@ -49,6 +49,9 @@ static __be64 *pnv_alloc_tce_level(int n
 	return addr;
 }
 
+static void pnv_pci_ioda2_table_do_free_pages(__be64 *addr,
+		unsigned long size, unsigned int levels);
+
 static __be64 *pnv_tce(struct iommu_table *tbl, bool user, long idx, bool alloc)
 {
 	__be64 *tmp = user ? tbl->it_userspace : (__be64 *) tbl->it_base;
@@ -58,9 +61,9 @@ static __be64 *pnv_tce(struct iommu_tabl
 
 	while (level) {
 		int n = (idx & mask) >> (level * shift);
-		unsigned long tce;
+		unsigned long oldtce, tce = be64_to_cpu(READ_ONCE(tmp[n]));
 
-		if (tmp[n] == 0) {
+		if (!tce) {
 			__be64 *tmp2;
 
 			if (!alloc)
@@ -71,10 +74,15 @@ static __be64 *pnv_tce(struct iommu_tabl
 			if (!tmp2)
 				return NULL;
 
-			tmp[n] = cpu_to_be64(__pa(tmp2) |
-					TCE_PCI_READ | TCE_PCI_WRITE);
+			tce = __pa(tmp2) | TCE_PCI_READ | TCE_PCI_WRITE;
+			oldtce = be64_to_cpu(cmpxchg(&tmp[n], 0,
+					cpu_to_be64(tce)));
+			if (oldtce) {
+				pnv_pci_ioda2_table_do_free_pages(tmp2,
+					ilog2(tbl->it_level_size) + 3, 1);
+				tce = oldtce;
+			}
 		}
-		tce = be64_to_cpu(tmp[n]);
 
 		tmp = __va(tce & ~(TCE_PCI_READ | TCE_PCI_WRITE));
 		idx &= ~mask;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 030/148] powerpc/kasan: Fix parallel loading of modules.
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (28 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 029/148] powerpc/powernv/ioda: Fix race in TCE level allocation Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 031/148] powerpc/kasan: Fix shadow area set up for modules Greg Kroah-Hartman
                   ` (122 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 45ff3c55958542c3b76075d59741297b8cb31cbb upstream.

Parallel loading of modules may lead to bad setup of shadow page table
entries.

First, lets align modules so that two modules never share the same
shadow page.

Second, ensure that two modules cannot allocate two page tables for
the same PMD entry at the same time. This is done by using
init_mm.page_table_lock in the same way as __pte_alloc_kernel()

Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c97284f912128cbc3f2fe09d68e90e65fb3e6026.1565361876.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/kasan/kasan_init_32.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -5,6 +5,7 @@
 #include <linux/kasan.h>
 #include <linux/printk.h>
 #include <linux/memblock.h>
+#include <linux/moduleloader.h>
 #include <linux/sched/task.h>
 #include <linux/vmalloc.h>
 #include <asm/pgalloc.h>
@@ -46,7 +47,19 @@ static int __ref kasan_init_shadow_page_
 			kasan_populate_pte(new, PAGE_READONLY);
 		else
 			kasan_populate_pte(new, PAGE_KERNEL_RO);
-		pmd_populate_kernel(&init_mm, pmd, new);
+
+		smp_wmb(); /* See comment in __pte_alloc */
+
+		spin_lock(&init_mm.page_table_lock);
+			/* Has another populated it ? */
+		if (likely((void *)pmd_page_vaddr(*pmd) == kasan_early_shadow_pte)) {
+			pmd_populate_kernel(&init_mm, pmd, new);
+			new = NULL;
+		}
+		spin_unlock(&init_mm.page_table_lock);
+
+		if (new && slab_is_available())
+			pte_free_kernel(&init_mm, new);
 	}
 	return 0;
 }
@@ -137,7 +150,11 @@ void __init kasan_init(void)
 #ifdef CONFIG_MODULES
 void *module_alloc(unsigned long size)
 {
-	void *base = vmalloc_exec(size);
+	void *base;
+
+	base = __vmalloc_node_range(size, MODULE_ALIGN, VMALLOC_START, VMALLOC_END,
+				    GFP_KERNEL, PAGE_KERNEL_EXEC, VM_FLUSH_RESET_PERMS,
+				    NUMA_NO_NODE, __builtin_return_address(0));
 
 	if (!base)
 		return NULL;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 031/148] powerpc/kasan: Fix shadow area set up for modules.
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (29 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 030/148] powerpc/kasan: Fix parallel loading of modules Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 032/148] powerpc/book3s64/mm: Dont do tlbie fixup for some hardware revisions Greg Kroah-Hartman
                   ` (121 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Erhard F.,
	Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 663c0c9496a69f80011205ba3194049bcafd681d upstream.

When loading modules, from time to time an Oops is encountered during
the init of shadow area for globals. This is due to the last page not
always being mapped depending on the exact distance between the start
and the end of the shadow area and the alignment with the page
addresses.

Fix this by aligning the starting address with the page address.

Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/4f887e9b77d0d725cbb52035c7ece485c1c5fc14.1565361881.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/kasan/kasan_init_32.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -87,7 +87,7 @@ static int __ref kasan_init_region(void
 	if (!slab_is_available())
 		block = memblock_alloc(k_end - k_start, PAGE_SIZE);
 
-	for (k_cur = k_start; k_cur < k_end; k_cur += PAGE_SIZE) {
+	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
 		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
 		void *va = block ? block + k_cur - k_start : kasan_get_one_page();
 		pte_t pte = pfn_pte(PHYS_PFN(__pa(va)), PAGE_KERNEL);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 032/148] powerpc/book3s64/mm: Dont do tlbie fixup for some hardware revisions
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (30 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 031/148] powerpc/kasan: Fix shadow area set up for modules Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 033/148] powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag Greg Kroah-Hartman
                   ` (120 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aneesh Kumar K.V, Michael Ellerman

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 677733e296b5c7a37c47da391fc70a43dc40bd67 upstream.

The store ordering vs tlbie issue mentioned in commit
a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9") is fixed for Nimbus 2.3 and Cumulus 1.3 revisions. We don't
need to apply the fixup if we are running on them

We can only do this on PowerNV. On pseries guest with KVM we still
don't support redoing the feature fixup after migration. So we should
be enabling all the workarounds needed, because whe can possibly
migrate between DD 2.3 and DD 2.2

Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/dt_cpu_ftrs.c |   30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -691,9 +691,35 @@ static bool __init cpufeatures_process_f
 	return true;
 }
 
+/*
+ * Handle POWER9 broadcast tlbie invalidation issue using
+ * cpu feature flag.
+ */
+static __init void update_tlbie_feature_flag(unsigned long pvr)
+{
+	if (PVR_VER(pvr) == PVR_POWER9) {
+		/*
+		 * Set the tlbie feature flag for anything below
+		 * Nimbus DD 2.3 and Cumulus DD 1.3
+		 */
+		if ((pvr & 0xe000) == 0) {
+			/* Nimbus */
+			if ((pvr & 0xfff) < 0x203)
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		} else if ((pvr & 0xc000) == 0) {
+			/* Cumulus */
+			if ((pvr & 0xfff) < 0x103)
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		} else {
+			WARN_ONCE(1, "Unknown PVR");
+			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+		}
+	}
+}
+
 static __init void cpufeatures_cpu_quirks(void)
 {
-	int version = mfspr(SPRN_PVR);
+	unsigned long version = mfspr(SPRN_PVR);
 
 	/*
 	 * Not all quirks can be derived from the cpufeatures device tree.
@@ -712,10 +738,10 @@ static __init void cpufeatures_cpu_quirk
 
 	if ((version & 0xffff0000) == 0x004e0000) {
 		cur_cpu_spec->cpu_features &= ~(CPU_FTR_DAWR);
-		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
 		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TIDR;
 	}
 
+	update_tlbie_feature_flag(version);
 	/*
 	 * PKEY was not in the initial base or feature node
 	 * specification, but it should become optional in the next



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 033/148] powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (31 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 032/148] powerpc/book3s64/mm: Dont do tlbie fixup for some hardware revisions Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 034/148] powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY Greg Kroah-Hartman
                   ` (119 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aneesh Kumar K.V, Michael Ellerman

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 09ce98cacd51fcd0fa0af2f79d1e1d3192f4cbb0 upstream.

Rename the #define to indicate this is related to store vs tlbie
ordering issue. In the next patch, we will be adding another feature
flag that is used to handles ERAT flush vs tlbie ordering issue.

Fixes: a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/cputable.h    |    4 ++--
 arch/powerpc/kernel/dt_cpu_ftrs.c      |    6 +++---
 arch/powerpc/kvm/book3s_hv_rm_mmu.c    |    2 +-
 arch/powerpc/mm/book3s64/hash_native.c |    2 +-
 arch/powerpc/mm/book3s64/radix_tlb.c   |    4 ++--
 5 files changed, 9 insertions(+), 9 deletions(-)

--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -213,7 +213,7 @@ static inline void cpu_feature_keys_init
 #define CPU_FTR_POWER9_DD2_1		LONG_ASM_CONST(0x0000080000000000)
 #define CPU_FTR_P9_TM_HV_ASSIST		LONG_ASM_CONST(0x0000100000000000)
 #define CPU_FTR_P9_TM_XER_SO_BUG	LONG_ASM_CONST(0x0000200000000000)
-#define CPU_FTR_P9_TLBIE_BUG		LONG_ASM_CONST(0x0000400000000000)
+#define CPU_FTR_P9_TLBIE_STQ_BUG	LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_P9_TIDR			LONG_ASM_CONST(0x0000800000000000)
 
 #ifndef __ASSEMBLY__
@@ -461,7 +461,7 @@ static inline void cpu_feature_keys_init
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_P9_TLBIE_BUG | CPU_FTR_P9_TIDR)
+	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TIDR)
 #define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
 #define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
 #define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -705,14 +705,14 @@ static __init void update_tlbie_feature_
 		if ((pvr & 0xe000) == 0) {
 			/* Nimbus */
 			if ((pvr & 0xfff) < 0x203)
-				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		} else if ((pvr & 0xc000) == 0) {
 			/* Cumulus */
 			if ((pvr & 0xfff) < 0x103)
-				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+				cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		} else {
 			WARN_ONCE(1, "Unknown PVR");
-			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_BUG;
+			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		}
 	}
 }
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -451,7 +451,7 @@ static void do_tlbies(struct kvm *kvm, u
 				     "r" (rbvalues[i]), "r" (kvm->arch.lpid));
 		}
 
-		if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+		if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 			/*
 			 * Need the extra ptesync to make sure we don't
 			 * re-order the tlbie
--- a/arch/powerpc/mm/book3s64/hash_native.c
+++ b/arch/powerpc/mm/book3s64/hash_native.c
@@ -199,7 +199,7 @@ static inline unsigned long  ___tlbie(un
 
 static inline void fixup_tlbie(unsigned long vpn, int psize, int apsize, int ssize)
 {
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		/* Need the extra ptesync to ensure we don't reorder tlbie*/
 		asm volatile("ptesync": : :"memory");
 		___tlbie(vpn, psize, apsize, ssize);
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -216,7 +216,7 @@ static inline void fixup_tlbie(void)
 	unsigned long pid = 0;
 	unsigned long va = ((1UL << 52) - 1);
 
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_va(va, pid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}
@@ -226,7 +226,7 @@ static inline void fixup_tlbie_lpid(unsi
 {
 	unsigned long va = ((1UL << 52) - 1);
 
-	if (cpu_has_feature(CPU_FTR_P9_TLBIE_BUG)) {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_lpid_va(va, lpid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 034/148] powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (32 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 033/148] powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 035/148] powerpc/mm: Fix an Oops in kasan_mmu_init() Greg Kroah-Hartman
                   ` (118 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit 4c0f5d1eb4072871c34530358df45f05ab80edd6 upstream.

In a couple of places there is a need to select whether read-only
protection of shadow pages is performed with PAGE_KERNEL_RO or with
PAGE_READONLY.

Add a helper to avoid duplicating the choice.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9f33f44b9cd741c4a02b3dce7b8ef9438fe2cd2a.1566382750.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/kasan/kasan_init_32.c |   21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -12,6 +12,14 @@
 #include <asm/code-patching.h>
 #include <mm/mmu_decl.h>
 
+static pgprot_t kasan_prot_ro(void)
+{
+	if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
+		return PAGE_READONLY;
+
+	return PAGE_KERNEL_RO;
+}
+
 static void kasan_populate_pte(pte_t *ptep, pgprot_t prot)
 {
 	unsigned long va = (unsigned long)kasan_early_shadow_page;
@@ -26,6 +34,7 @@ static int __ref kasan_init_shadow_page_
 {
 	pmd_t *pmd;
 	unsigned long k_cur, k_next;
+	pgprot_t prot = kasan_prot_ro();
 
 	pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
 
@@ -43,10 +52,7 @@ static int __ref kasan_init_shadow_page_
 
 		if (!new)
 			return -ENOMEM;
-		if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
-			kasan_populate_pte(new, PAGE_READONLY);
-		else
-			kasan_populate_pte(new, PAGE_KERNEL_RO);
+		kasan_populate_pte(new, prot);
 
 		smp_wmb(); /* See comment in __pte_alloc */
 
@@ -103,10 +109,9 @@ static int __ref kasan_init_region(void
 
 static void __init kasan_remap_early_shadow_ro(void)
 {
-	if (early_mmu_has_feature(MMU_FTR_HPTE_TABLE))
-		kasan_populate_pte(kasan_early_shadow_pte, PAGE_READONLY);
-	else
-		kasan_populate_pte(kasan_early_shadow_pte, PAGE_KERNEL_RO);
+	pgprot_t prot = kasan_prot_ro();
+
+	kasan_populate_pte(kasan_early_shadow_pte, prot);
 
 	flush_tlb_kernel_range(KASAN_SHADOW_START, KASAN_SHADOW_END);
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 035/148] powerpc/mm: Fix an Oops in kasan_mmu_init()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (33 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 034/148] powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 036/148] powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 Greg Kroah-Hartman
                   ` (117 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Christophe Leroy, Michael Ellerman

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit cbd18991e24fea2c31da3bb117c83e4a3538cd11 upstream.

Uncompressing Kernel Image ... OK
   Loading Device Tree to 01ff7000, end 01fff74f ... OK
[    0.000000] printk: bootconsole [udbg0] enabled
[    0.000000] BUG: Unable to handle kernel data access at 0xf818c000
[    0.000000] Faulting instruction address: 0xc0013c7c
[    0.000000] Thread overran stack, or stack corrupted
[    0.000000] Oops: Kernel access of bad area, sig: 11 [#1]
[    0.000000] BE PAGE_SIZE=16K PREEMPT
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.3.0-rc4-s3k-dev-00743-g5abe4a3e8fd3-dirty #2080
[    0.000000] NIP:  c0013c7c LR: c0013310 CTR: 00000000
[    0.000000] REGS: c0c5ff38 TRAP: 0300   Not tainted  (5.3.0-rc4-s3k-dev-00743-g5abe4a3e8fd3-dirty)
[    0.000000] MSR:  00001032 <ME,IR,DR,RI>  CR: 99033955  XER: 80002100
[    0.000000] DAR: f818c000 DSISR: 82000000
[    0.000000] GPR00: c0013310 c0c5fff0 c0ad6ac0 c0c600c0 f818c031 82000000 00000000 ffffffff
[    0.000000] GPR08: 00000000 f1f1f1f1 c0013c2c c0013304 99033955 00400008 00000000 07ff9598
[    0.000000] GPR16: 00000000 07ffb94c 00000000 00000000 00000000 00000000 00000000 f818cfb2
[    0.000000] GPR24: 00000000 00000000 00001000 ffffffff 00000000 c07dbf80 00000000 f818c000
[    0.000000] NIP [c0013c7c] do_page_fault+0x50/0x904
[    0.000000] LR [c0013310] handle_page_fault+0xc/0x38
[    0.000000] Call Trace:
[    0.000000] Instruction dump:
[    0.000000] be010080 91410014 553fe8fe 3d40c001 3d20f1f1 7d800026 394a3c2c 3fffe000
[    0.000000] 6129f1f1 900100c4 9181007c 91410018 <913f0000> 3d2001f4 6129f4f4 913f0004

Don't map the early shadow page read-only yet when creating the new
page tables for the real shadow memory, otherwise the memblock
allocations that immediately follows to create the real shadow pages
that are about to replace the early shadow page trigger a page fault
if they fall into the region being worked on at the moment.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fe86886fb8db44360417cee0dc515ad47ca6ef72.1566382750.git.christophe.leroy@c-s.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/kasan/kasan_init_32.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/arch/powerpc/mm/kasan/kasan_init_32.c
+++ b/arch/powerpc/mm/kasan/kasan_init_32.c
@@ -34,7 +34,7 @@ static int __ref kasan_init_shadow_page_
 {
 	pmd_t *pmd;
 	unsigned long k_cur, k_next;
-	pgprot_t prot = kasan_prot_ro();
+	pgprot_t prot = slab_is_available() ? kasan_prot_ro() : PAGE_KERNEL;
 
 	pmd = pmd_offset(pud_offset(pgd_offset_k(k_start), k_start), k_start);
 
@@ -110,9 +110,22 @@ static int __ref kasan_init_region(void
 static void __init kasan_remap_early_shadow_ro(void)
 {
 	pgprot_t prot = kasan_prot_ro();
+	unsigned long k_start = KASAN_SHADOW_START;
+	unsigned long k_end = KASAN_SHADOW_END;
+	unsigned long k_cur;
+	phys_addr_t pa = __pa(kasan_early_shadow_page);
 
 	kasan_populate_pte(kasan_early_shadow_pte, prot);
 
+	for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
+		pmd_t *pmd = pmd_offset(pud_offset(pgd_offset_k(k_cur), k_cur), k_cur);
+		pte_t *ptep = pte_offset_kernel(pmd, k_cur);
+
+		if ((pte_val(*ptep) & PTE_RPN_MASK) != pa)
+			continue;
+
+		__set_pte_at(&init_mm, k_cur, ptep, pfn_pte(PHYS_PFN(pa), prot), 0);
+	}
 	flush_tlb_kernel_range(KASAN_SHADOW_START, KASAN_SHADOW_END);
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 036/148] powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (34 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 035/148] powerpc/mm: Fix an Oops in kasan_mmu_init() Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 037/148] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset Greg Kroah-Hartman
                   ` (116 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aneesh Kumar K.V, Michael Ellerman

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 047e6575aec71d75b765c22111820c4776cd1c43 upstream.

On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.

The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.

We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.

Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/cputable.h    |    3 -
 arch/powerpc/kernel/dt_cpu_ftrs.c      |    2 
 arch/powerpc/kvm/book3s_hv_rm_mmu.c    |   42 +++++++++++++----
 arch/powerpc/mm/book3s64/hash_native.c |   29 ++++++++++-
 arch/powerpc/mm/book3s64/radix_tlb.c   |   80 +++++++++++++++++++++++++++++----
 5 files changed, 134 insertions(+), 22 deletions(-)

--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -215,6 +215,7 @@ static inline void cpu_feature_keys_init
 #define CPU_FTR_P9_TM_XER_SO_BUG	LONG_ASM_CONST(0x0000200000000000)
 #define CPU_FTR_P9_TLBIE_STQ_BUG	LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_P9_TIDR			LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_P9_TLBIE_ERAT_BUG	LONG_ASM_CONST(0x0001000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -461,7 +462,7 @@ static inline void cpu_feature_keys_init
 	    CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
 	    CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
 	    CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
-	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TIDR)
+	    CPU_FTR_P9_TLBIE_STQ_BUG | CPU_FTR_P9_TLBIE_ERAT_BUG | CPU_FTR_P9_TIDR)
 #define CPU_FTRS_POWER9_DD2_0 CPU_FTRS_POWER9
 #define CPU_FTRS_POWER9_DD2_1 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1)
 #define CPU_FTRS_POWER9_DD2_2 (CPU_FTRS_POWER9 | CPU_FTR_POWER9_DD2_1 | \
--- a/arch/powerpc/kernel/dt_cpu_ftrs.c
+++ b/arch/powerpc/kernel/dt_cpu_ftrs.c
@@ -714,6 +714,8 @@ static __init void update_tlbie_feature_
 			WARN_ONCE(1, "Unknown PVR");
 			cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_STQ_BUG;
 		}
+
+		cur_cpu_spec->cpu_features |= CPU_FTR_P9_TLBIE_ERAT_BUG;
 	}
 }
 
--- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c
+++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c
@@ -433,6 +433,37 @@ static inline int is_mmio_hpte(unsigned
 		(HPTE_R_KEY_HI | HPTE_R_KEY_LO));
 }
 
+static inline void fixup_tlbie_lpid(unsigned long rb_value, unsigned long lpid)
+{
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		/* Radix flush for a hash guest */
+
+		unsigned long rb,rs,prs,r,ric;
+
+		rb = PPC_BIT(52); /* IS = 2 */
+		rs = 0;  /* lpid = 0 */
+		prs = 0; /* partition scoped */
+		r = 1;   /* radix format */
+		ric = 0; /* RIC_FLSUH_TLB */
+
+		/*
+		 * Need the extra ptesync to make sure we don't
+		 * re-order the tlbie
+		 */
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+			     : : "r"(rb), "i"(r), "i"(prs),
+			       "i"(ric), "r"(rs) : "memory");
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0,%1,0,0,0) : :
+			     "r" (rb_value), "r" (lpid));
+	}
+}
+
 static void do_tlbies(struct kvm *kvm, unsigned long *rbvalues,
 		      long npages, int global, bool need_sync)
 {
@@ -451,16 +482,7 @@ static void do_tlbies(struct kvm *kvm, u
 				     "r" (rbvalues[i]), "r" (kvm->arch.lpid));
 		}
 
-		if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
-			/*
-			 * Need the extra ptesync to make sure we don't
-			 * re-order the tlbie
-			 */
-			asm volatile("ptesync": : :"memory");
-			asm volatile(PPC_TLBIE_5(%0,%1,0,0,0) : :
-				     "r" (rbvalues[0]), "r" (kvm->arch.lpid));
-		}
-
+		fixup_tlbie_lpid(rbvalues[i - 1], kvm->arch.lpid);
 		asm volatile("eieio; tlbsync; ptesync" : : : "memory");
 	} else {
 		if (need_sync)
--- a/arch/powerpc/mm/book3s64/hash_native.c
+++ b/arch/powerpc/mm/book3s64/hash_native.c
@@ -197,8 +197,31 @@ static inline unsigned long  ___tlbie(un
 	return va;
 }
 
-static inline void fixup_tlbie(unsigned long vpn, int psize, int apsize, int ssize)
+static inline void fixup_tlbie_vpn(unsigned long vpn, int psize,
+				   int apsize, int ssize)
 {
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		/* Radix flush for a hash guest */
+
+		unsigned long rb,rs,prs,r,ric;
+
+		rb = PPC_BIT(52); /* IS = 2 */
+		rs = 0;  /* lpid = 0 */
+		prs = 0; /* partition scoped */
+		r = 1;   /* radix format */
+		ric = 0; /* RIC_FLSUH_TLB */
+
+		/*
+		 * Need the extra ptesync to make sure we don't
+		 * re-order the tlbie
+		 */
+		asm volatile("ptesync": : :"memory");
+		asm volatile(PPC_TLBIE_5(%0, %4, %3, %2, %1)
+			     : : "r"(rb), "i"(r), "i"(prs),
+			       "i"(ric), "r"(rs) : "memory");
+	}
+
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		/* Need the extra ptesync to ensure we don't reorder tlbie*/
 		asm volatile("ptesync": : :"memory");
@@ -283,7 +306,7 @@ static inline void tlbie(unsigned long v
 		asm volatile("ptesync": : :"memory");
 	} else {
 		__tlbie(vpn, psize, apsize, ssize);
-		fixup_tlbie(vpn, psize, apsize, ssize);
+		fixup_tlbie_vpn(vpn, psize, apsize, ssize);
 		asm volatile("eieio; tlbsync; ptesync": : :"memory");
 	}
 	if (lock_tlbie && !use_local)
@@ -856,7 +879,7 @@ static void native_flush_hash_range(unsi
 		/*
 		 * Just do one more with the last used values.
 		 */
-		fixup_tlbie(vpn, psize, psize, ssize);
+		fixup_tlbie_vpn(vpn, psize, psize, ssize);
 		asm volatile("eieio; tlbsync; ptesync":::"memory");
 
 		if (lock_tlbie)
--- a/arch/powerpc/mm/book3s64/radix_tlb.c
+++ b/arch/powerpc/mm/book3s64/radix_tlb.c
@@ -211,21 +211,82 @@ static __always_inline void __tlbie_lpid
 	trace_tlbie(lpid, 0, rb, rs, ric, prs, r);
 }
 
-static inline void fixup_tlbie(void)
+
+static inline void fixup_tlbie_va(unsigned long va, unsigned long pid,
+				  unsigned long ap)
 {
-	unsigned long pid = 0;
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, 0, ap, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, pid, ap, RIC_FLUSH_TLB);
+	}
+}
+
+static inline void fixup_tlbie_va_range(unsigned long va, unsigned long pid,
+					unsigned long ap)
+{
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_pid(0, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_va(va, pid, ap, RIC_FLUSH_TLB);
+	}
+}
+
+static inline void fixup_tlbie_pid(unsigned long pid)
+{
+	/*
+	 * We can use any address for the invalidation, pick one which is
+	 * probably unused as an optimisation.
+	 */
 	unsigned long va = ((1UL << 52) - 1);
 
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_pid(0, RIC_FLUSH_TLB);
+	}
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_va(va, pid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
 	}
 }
 
+
+static inline void fixup_tlbie_lpid_va(unsigned long va, unsigned long lpid,
+				       unsigned long ap)
+{
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid_va(va, 0, ap, RIC_FLUSH_TLB);
+	}
+
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid_va(va, lpid, ap, RIC_FLUSH_TLB);
+	}
+}
+
 static inline void fixup_tlbie_lpid(unsigned long lpid)
 {
+	/*
+	 * We can use any address for the invalidation, pick one which is
+	 * probably unused as an optimisation.
+	 */
 	unsigned long va = ((1UL << 52) - 1);
 
+	if (cpu_has_feature(CPU_FTR_P9_TLBIE_ERAT_BUG)) {
+		asm volatile("ptesync": : :"memory");
+		__tlbie_lpid(0, RIC_FLUSH_TLB);
+	}
+
 	if (cpu_has_feature(CPU_FTR_P9_TLBIE_STQ_BUG)) {
 		asm volatile("ptesync": : :"memory");
 		__tlbie_lpid_va(va, lpid, mmu_get_ap(MMU_PAGE_64K), RIC_FLUSH_TLB);
@@ -273,6 +334,7 @@ static inline void _tlbie_pid(unsigned l
 	switch (ric) {
 	case RIC_FLUSH_TLB:
 		__tlbie_pid(pid, RIC_FLUSH_TLB);
+		fixup_tlbie_pid(pid);
 		break;
 	case RIC_FLUSH_PWC:
 		__tlbie_pid(pid, RIC_FLUSH_PWC);
@@ -280,8 +342,8 @@ static inline void _tlbie_pid(unsigned l
 	case RIC_FLUSH_ALL:
 	default:
 		__tlbie_pid(pid, RIC_FLUSH_ALL);
+		fixup_tlbie_pid(pid);
 	}
-	fixup_tlbie();
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -325,6 +387,7 @@ static inline void _tlbie_lpid(unsigned
 	switch (ric) {
 	case RIC_FLUSH_TLB:
 		__tlbie_lpid(lpid, RIC_FLUSH_TLB);
+		fixup_tlbie_lpid(lpid);
 		break;
 	case RIC_FLUSH_PWC:
 		__tlbie_lpid(lpid, RIC_FLUSH_PWC);
@@ -332,8 +395,8 @@ static inline void _tlbie_lpid(unsigned
 	case RIC_FLUSH_ALL:
 	default:
 		__tlbie_lpid(lpid, RIC_FLUSH_ALL);
+		fixup_tlbie_lpid(lpid);
 	}
-	fixup_tlbie_lpid(lpid);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -407,6 +470,8 @@ static inline void __tlbie_va_range(unsi
 
 	for (addr = start; addr < end; addr += page_size)
 		__tlbie_va(addr, pid, ap, RIC_FLUSH_TLB);
+
+	fixup_tlbie_va_range(addr - page_size, pid, ap);
 }
 
 static __always_inline void _tlbie_va(unsigned long va, unsigned long pid,
@@ -416,7 +481,7 @@ static __always_inline void _tlbie_va(un
 
 	asm volatile("ptesync": : :"memory");
 	__tlbie_va(va, pid, ap, ric);
-	fixup_tlbie();
+	fixup_tlbie_va(va, pid, ap);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -427,7 +492,7 @@ static __always_inline void _tlbie_lpid_
 
 	asm volatile("ptesync": : :"memory");
 	__tlbie_lpid_va(va, lpid, ap, ric);
-	fixup_tlbie_lpid(lpid);
+	fixup_tlbie_lpid_va(va, lpid, ap);
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -439,7 +504,6 @@ static inline void _tlbie_va_range(unsig
 	if (also_pwc)
 		__tlbie_pid(pid, RIC_FLUSH_PWC);
 	__tlbie_va_range(start, end, pid, page_size, psize);
-	fixup_tlbie();
 	asm volatile("eieio; tlbsync; ptesync": : :"memory");
 }
 
@@ -775,7 +839,7 @@ is_local:
 			if (gflush)
 				__tlbie_va_range(gstart, gend, pid,
 						PUD_SIZE, MMU_PAGE_1G);
-			fixup_tlbie();
+
 			asm volatile("eieio; tlbsync; ptesync": : :"memory");
 		}
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 037/148] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (35 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 036/148] powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:34 ` [PATCH 5.3 038/148] tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file Greg Kroah-Hartman
                   ` (115 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sean Nyekjaer, Marc Kleine-Budde

From: Marc Kleine-Budde <mkl@pengutronix.de>

commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream.

Some boards take longer than 5ms to power up after a reset, so allow
some retries attempts before giving up.

Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()")
Cc: linux-stable <stable@vger.kernel.org>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/spi/mcp251x.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -612,7 +612,7 @@ static int mcp251x_setup(struct net_devi
 static int mcp251x_hw_reset(struct spi_device *spi)
 {
 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
-	u8 reg;
+	unsigned long timeout;
 	int ret;
 
 	/* Wait for oscillator startup timer after power up */
@@ -626,10 +626,19 @@ static int mcp251x_hw_reset(struct spi_d
 	/* Wait for oscillator startup timer after reset */
 	mdelay(MCP251X_OST_DELAY_MS);
 
-	reg = mcp251x_read_reg(spi, CANSTAT);
-	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
-		return -ENODEV;
-
+	/* Wait for reset to finish */
+	timeout = jiffies + HZ;
+	while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
+	       CANCTRL_REQOP_CONF) {
+		usleep_range(MCP251X_OST_DELAY_MS * 1000,
+			     MCP251X_OST_DELAY_MS * 1000 * 2);
+
+		if (time_after(jiffies, timeout)) {
+			dev_err(&spi->dev,
+				"MCP251x didn't enter in conf mode after reset\n");
+			return -EBUSY;
+		}
+	}
 	return 0;
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 038/148] tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (36 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 037/148] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset Greg Kroah-Hartman
@ 2019-10-10  8:34 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 039/148] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure Greg Kroah-Hartman
                   ` (114 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:34 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tzvetomir Stoyanov,
	Steven Rostedt (VMware),
	Alexander Shishkin, David Carrillo-Cisneros, He Kuang, Jiri Olsa,
	Michal rarek, Paul Turner, Peter Zijlstra, Stephane Eranian,
	Uwe Kleine-König, Wang Nan, Arnaldo Carvalho de Melo

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 82a2f88458d70704be843961e10b5cef9a6e95d3 upstream.

The tools/lib/traceevent/Makefile had a test added to it to detect a failure
of the "nm" when making the dynamic list file (whatever that is). The
problem is that the test sorts the values "U W w" and some versions of sort
will place "w" ahead of "W" (even though it has a higher ASCII value, and
break the test.

Add 'tr "w" "W"' to merge the two and not worry about the ordering.

Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michal rarek <mmarek@suse.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: stable@vger.kernel.org
Fixes: 6467753d61399 ("tools lib traceevent: Robustify do_generate_dynamic_list_file")
Link: http://lkml.kernel.org/r/20190805130150.25acfeb1@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/lib/traceevent/Makefile |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -266,8 +266,8 @@ endef
 
 define do_generate_dynamic_list_file
 	symbol_type=`$(NM) -u -D $1 | awk 'NF>1 {print $$1}' | \
-	xargs echo "U W w" | tr ' ' '\n' | sort -u | xargs echo`;\
-	if [ "$$symbol_type" = "U W w" ];then				\
+	xargs echo "U w W" | tr 'w ' 'W\n' | sort -u | xargs echo`;\
+	if [ "$$symbol_type" = "U W" ];then				\
 		(echo '{';						\
 		$(NM) -u -D $1 | awk 'NF>1 {print "\t"$$2";"}' | sort -u;\
 		echo '};';						\



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 039/148] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (37 preceding siblings ...)
  2019-10-10  8:34 ` [PATCH 5.3 038/148] tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 040/148] crypto: qat - Silence smp_processor_id() warning Greg Kroah-Hartman
                   ` (113 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Steven Rostedt (VMware),
	Andrew Morton, Jiri Olsa, Namhyung Kim, linux-trace-devel,
	Arnaldo Carvalho de Melo

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit b0215e2d6a18d8331b2d4a8b38ccf3eff783edb1 upstream.

If the re-allocation of tep->cmdlines succeeds, then the previous
allocation of tep->cmdlines will be freed. If we later fail in
add_new_comm(), we must not free cmdlines, and also should assign
tep->cmdlines to the new allocation. Otherwise when freeing tep, the
tep->cmdlines will be pointing to garbage.

Fixes: a6d2a61ac653a ("tools lib traceevent: Remove some die() calls")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190828191819.970121417@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/lib/traceevent/event-parse.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/tools/lib/traceevent/event-parse.c
+++ b/tools/lib/traceevent/event-parse.c
@@ -269,10 +269,10 @@ static int add_new_comm(struct tep_handl
 		errno = ENOMEM;
 		return -1;
 	}
+	tep->cmdlines = cmdlines;
 
 	cmdlines[tep->cmdline_count].comm = strdup(comm);
 	if (!cmdlines[tep->cmdline_count].comm) {
-		free(cmdlines);
 		errno = ENOMEM;
 		return -1;
 	}
@@ -283,7 +283,6 @@ static int add_new_comm(struct tep_handl
 		tep->cmdline_count++;
 
 	qsort(cmdlines, tep->cmdline_count, sizeof(*cmdlines), cmdline_cmp);
-	tep->cmdlines = cmdlines;
 
 	return 0;
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 040/148] crypto: qat - Silence smp_processor_id() warning
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (38 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 039/148] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 041/148] crypto: skcipher - Unmap pages after an external error Greg Kroah-Hartman
                   ` (112 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexander Sverdlin, Herbert Xu

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

commit 1b82feb6c5e1996513d0fb0bbb475417088b4954 upstream.

It seems that smp_processor_id() is only used for a best-effort
load-balancing, refer to qat_crypto_get_instance_node(). It's not feasible
to disable preemption for the duration of the crypto requests. Therefore,
just silence the warning. This commit is similar to e7a9b05ca4
("crypto: cavium - Fix smp_processor_id() warnings").

Silences the following splat:
BUG: using smp_processor_id() in preemptible [00000000] code: cryptomgr_test/2904
caller is qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
CPU: 1 PID: 2904 Comm: cryptomgr_test Tainted: P           O    4.14.69 #1
...
Call Trace:
 dump_stack+0x5f/0x86
 check_preemption_disabled+0xd3/0xe0
 qat_alg_ablkcipher_setkey+0x300/0x4a0 [intel_qat]
 skcipher_setkey_ablkcipher+0x2b/0x40
 __test_skcipher+0x1f3/0xb20
 ? cpumask_next_and+0x26/0x40
 ? find_busiest_group+0x10e/0x9d0
 ? preempt_count_add+0x49/0xa0
 ? try_module_get+0x61/0xf0
 ? crypto_mod_get+0x15/0x30
 ? __kmalloc+0x1df/0x1f0
 ? __crypto_alloc_tfm+0x116/0x180
 ? crypto_skcipher_init_tfm+0xa6/0x180
 ? crypto_create_tfm+0x4b/0xf0
 test_skcipher+0x21/0xa0
 alg_test_skcipher+0x3f/0xa0
 alg_test.part.6+0x126/0x2a0
 ? finish_task_switch+0x21b/0x260
 ? __schedule+0x1e9/0x800
 ? __wake_up_common+0x8d/0x140
 cryptomgr_test+0x40/0x50
 kthread+0xff/0x130
 ? cryptomgr_notify+0x540/0x540
 ? kthread_create_on_node+0x70/0x70
 ret_from_fork+0x24/0x50

Fixes: ed8ccaef52 ("crypto: qat - Add support for SRIOV")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/qat/qat_common/adf_common_drv.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/qat/qat_common/adf_common_drv.h
@@ -95,7 +95,7 @@ struct service_hndl {
 
 static inline int get_current_node(void)
 {
-	return topology_physical_package_id(smp_processor_id());
+	return topology_physical_package_id(raw_smp_processor_id());
 }
 
 int adf_service_register(struct service_hndl *service);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 041/148] crypto: skcipher - Unmap pages after an external error
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (39 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 040/148] crypto: qat - Silence smp_processor_id() warning Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 042/148] crypto: cavium/zip - Add missing single_release() Greg Kroah-Hartman
                   ` (111 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ard Biesheuvel, Herbert Xu

From: Herbert Xu <herbert@gondor.apana.org.au>

commit 0ba3c026e685573bd3534c17e27da7c505ac99c4 upstream.

skcipher_walk_done may be called with an error by internal or
external callers.  For those internal callers we shouldn't unmap
pages but for external callers we must unmap any pages that are
in use.

This patch distinguishes between the two cases by checking whether
walk->nbytes is zero or not.  For internal callers, we now set
walk->nbytes to zero prior to the call.  For external callers,
walk->nbytes has always been non-zero (as zero is used to indicate
the termination of a walk).

Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 crypto/skcipher.c |   42 +++++++++++++++++++++++-------------------
 1 file changed, 23 insertions(+), 19 deletions(-)

--- a/crypto/skcipher.c
+++ b/crypto/skcipher.c
@@ -90,7 +90,7 @@ static inline u8 *skcipher_get_spot(u8 *
 	return max(start, end_page);
 }
 
-static void skcipher_done_slow(struct skcipher_walk *walk, unsigned int bsize)
+static int skcipher_done_slow(struct skcipher_walk *walk, unsigned int bsize)
 {
 	u8 *addr;
 
@@ -98,19 +98,21 @@ static void skcipher_done_slow(struct sk
 	addr = skcipher_get_spot(addr, bsize);
 	scatterwalk_copychunks(addr, &walk->out, bsize,
 			       (walk->flags & SKCIPHER_WALK_PHYS) ? 2 : 1);
+	return 0;
 }
 
 int skcipher_walk_done(struct skcipher_walk *walk, int err)
 {
-	unsigned int n; /* bytes processed */
-	bool more;
+	unsigned int n = walk->nbytes;
+	unsigned int nbytes = 0;
 
-	if (unlikely(err < 0))
+	if (!n)
 		goto finish;
 
-	n = walk->nbytes - err;
-	walk->total -= n;
-	more = (walk->total != 0);
+	if (likely(err >= 0)) {
+		n -= err;
+		nbytes = walk->total - n;
+	}
 
 	if (likely(!(walk->flags & (SKCIPHER_WALK_PHYS |
 				    SKCIPHER_WALK_SLOW |
@@ -126,7 +128,7 @@ unmap_src:
 		memcpy(walk->dst.virt.addr, walk->page, n);
 		skcipher_unmap_dst(walk);
 	} else if (unlikely(walk->flags & SKCIPHER_WALK_SLOW)) {
-		if (err) {
+		if (err > 0) {
 			/*
 			 * Didn't process all bytes.  Either the algorithm is
 			 * broken, or this was the last step and it turned out
@@ -134,27 +136,29 @@ unmap_src:
 			 * the algorithm requires it.
 			 */
 			err = -EINVAL;
-			goto finish;
-		}
-		skcipher_done_slow(walk, n);
-		goto already_advanced;
+			nbytes = 0;
+		} else
+			n = skcipher_done_slow(walk, n);
 	}
 
+	if (err > 0)
+		err = 0;
+
+	walk->total = nbytes;
+	walk->nbytes = 0;
+
 	scatterwalk_advance(&walk->in, n);
 	scatterwalk_advance(&walk->out, n);
-already_advanced:
-	scatterwalk_done(&walk->in, 0, more);
-	scatterwalk_done(&walk->out, 1, more);
+	scatterwalk_done(&walk->in, 0, nbytes);
+	scatterwalk_done(&walk->out, 1, nbytes);
 
-	if (more) {
+	if (nbytes) {
 		crypto_yield(walk->flags & SKCIPHER_WALK_SLEEP ?
 			     CRYPTO_TFM_REQ_MAY_SLEEP : 0);
 		return skcipher_walk_next(walk);
 	}
-	err = 0;
-finish:
-	walk->nbytes = 0;
 
+finish:
 	/* Short-circuit for the common/fast path. */
 	if (!((unsigned long)walk->buffer | (unsigned long)walk->page))
 		goto out;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 042/148] crypto: cavium/zip - Add missing single_release()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (40 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 041/148] crypto: skcipher - Unmap pages after an external error Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 043/148] crypto: caam/qi - fix error handling in ERN handler Greg Kroah-Hartman
                   ` (110 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wei Yongjun, Herbert Xu

From: Wei Yongjun <weiyongjun1@huawei.com>

commit c552ffb5c93d9d65aaf34f5f001c4e7e8484ced1 upstream.

When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.

Fixes: 09ae5d37e093 ("crypto: zip - Add Compression/Decompression statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/cavium/zip/zip_main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/crypto/cavium/zip/zip_main.c
+++ b/drivers/crypto/cavium/zip/zip_main.c
@@ -593,6 +593,7 @@ static const struct file_operations zip_
 	.owner = THIS_MODULE,
 	.open  = zip_stats_open,
 	.read  = seq_read,
+	.release = single_release,
 };
 
 static int zip_clear_open(struct inode *inode, struct file *file)
@@ -604,6 +605,7 @@ static const struct file_operations zip_
 	.owner = THIS_MODULE,
 	.open  = zip_clear_open,
 	.read  = seq_read,
+	.release = single_release,
 };
 
 static int zip_regs_open(struct inode *inode, struct file *file)
@@ -615,6 +617,7 @@ static const struct file_operations zip_
 	.owner = THIS_MODULE,
 	.open  = zip_regs_open,
 	.read  = seq_read,
+	.release = single_release,
 };
 
 /* Root directory for thunderx_zip debugfs entry */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 043/148] crypto: caam/qi - fix error handling in ERN handler
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (41 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 042/148] crypto: cavium/zip - Add missing single_release() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 044/148] crypto: caam - fix concurrency issue in givencrypt descriptor Greg Kroah-Hartman
                   ` (109 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Horia Geantă,
	Iuliana Prodan, Herbert Xu

From: Horia Geantă <horia.geanta@nxp.com>

commit 51fab3d73054ca5b06b26e20edac0486b052c6f4 upstream.

ERN handler calls the caam/qi frontend "done" callback with a status
of -EIO. This is incorrect, since the callback expects a status value
meaningful for the crypto engine - hence the cryptic messages
like the one below:
platform caam_qi: 15: unknown error source

Fix this by providing the callback with:
-the status returned by the crypto engine (fd[status]) in case
it contains an error, OR
-a QI "No error" code otherwise; this will trigger the message:
platform caam_qi: 50000000: Queue Manager Interface: No error
which is fine, since QMan driver provides details about the cause of
failure

Cc: <stable@vger.kernel.org> # v5.1+
Fixes: 67c2315def06 ("crypto: caam - add Queue Interface (QI) backend support")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/error.c |    1 +
 drivers/crypto/caam/qi.c    |    5 ++++-
 drivers/crypto/caam/regs.h  |    1 +
 3 files changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/crypto/caam/error.c
+++ b/drivers/crypto/caam/error.c
@@ -118,6 +118,7 @@ static const struct {
 	u8 value;
 	const char *error_text;
 } qi_error_list[] = {
+	{ 0x00, "No error" },
 	{ 0x1F, "Job terminated by FQ or ICID flush" },
 	{ 0x20, "FD format error"},
 	{ 0x21, "FD command format error"},
--- a/drivers/crypto/caam/qi.c
+++ b/drivers/crypto/caam/qi.c
@@ -163,7 +163,10 @@ static void caam_fq_ern_cb(struct qman_p
 	dma_unmap_single(drv_req->drv_ctx->qidev, qm_fd_addr(fd),
 			 sizeof(drv_req->fd_sgt), DMA_BIDIRECTIONAL);
 
-	drv_req->cbk(drv_req, -EIO);
+	if (fd->status)
+		drv_req->cbk(drv_req, be32_to_cpu(fd->status));
+	else
+		drv_req->cbk(drv_req, JRSTA_SSRC_QI);
 }
 
 static struct qman_fq *create_caam_req_fq(struct device *qidev,
--- a/drivers/crypto/caam/regs.h
+++ b/drivers/crypto/caam/regs.h
@@ -641,6 +641,7 @@ struct caam_job_ring {
 #define JRSTA_SSRC_CCB_ERROR        0x20000000
 #define JRSTA_SSRC_JUMP_HALT_USER   0x30000000
 #define JRSTA_SSRC_DECO             0x40000000
+#define JRSTA_SSRC_QI               0x50000000
 #define JRSTA_SSRC_JRERROR          0x60000000
 #define JRSTA_SSRC_JUMP_HALT_CC     0x70000000
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 044/148] crypto: caam - fix concurrency issue in givencrypt descriptor
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (42 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 043/148] crypto: caam/qi - fix error handling in ERN handler Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 045/148] crypto: ccree - account for TEE not ready to report Greg Kroah-Hartman
                   ` (108 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Horia Geantă, Herbert Xu

From: Horia Geantă <horia.geanta@nxp.com>

commit 48f89d2a2920166c35b1c0b69917dbb0390ebec7 upstream.

IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:

[29] 10FA0004           ld: ind-nfifo (len=4) imm
[30] 81F00010               <nfifo_entry: ofifo->class2 type=msg len=16>
[31] 14820004           ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010               data:0x00000010
[33] 8210010D    operation: cls1-op aes cbc init-final enc
[34] A8080B04         math: (seqin + math0)->vseqout len=4
[35] 28000010    seqfifold: skip len=16
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000   seqfifostr: msg len=vseqoutsz
[39] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.

Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.

New descriptor with jump command inserted at [37]:

[..]
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] A1000401         jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000   seqfifostr: msg len=vseqoutsz
[40] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]

Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 1acebad3d8db8 ("crypto: caam - faster aead implementation")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/caam/caamalg_desc.c |    9 +++++++++
 drivers/crypto/caam/caamalg_desc.h |    2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/crypto/caam/caamalg_desc.c
+++ b/drivers/crypto/caam/caamalg_desc.c
@@ -503,6 +503,7 @@ void cnstr_shdsc_aead_givencap(u32 * con
 			       const bool is_qi, int era)
 {
 	u32 geniv, moveiv;
+	u32 *wait_cmd;
 
 	/* Note: Context registers are saved. */
 	init_sh_desc_key_aead(desc, cdata, adata, is_rfc3686, nonce, era);
@@ -598,6 +599,14 @@ copy_iv:
 
 	/* Will read cryptlen */
 	append_math_add(desc, VARSEQINLEN, SEQINLEN, REG0, CAAM_CMD_SZ);
+
+	/*
+	 * Wait for IV transfer (ofifo -> class2) to finish before starting
+	 * ciphertext transfer (ofifo -> external memory).
+	 */
+	wait_cmd = append_jump(desc, JUMP_JSL | JUMP_TEST_ALL | JUMP_COND_NIFP);
+	set_jump_tgt_here(desc, wait_cmd);
+
 	append_seq_fifo_load(desc, 0, FIFOLD_CLASS_BOTH | KEY_VLF |
 			     FIFOLD_TYPE_MSG1OUT2 | FIFOLD_TYPE_LASTBOTH);
 	append_seq_fifo_store(desc, 0, FIFOST_TYPE_MESSAGE_DATA | KEY_VLF);
--- a/drivers/crypto/caam/caamalg_desc.h
+++ b/drivers/crypto/caam/caamalg_desc.h
@@ -12,7 +12,7 @@
 #define DESC_AEAD_BASE			(4 * CAAM_CMD_SZ)
 #define DESC_AEAD_ENC_LEN		(DESC_AEAD_BASE + 11 * CAAM_CMD_SZ)
 #define DESC_AEAD_DEC_LEN		(DESC_AEAD_BASE + 15 * CAAM_CMD_SZ)
-#define DESC_AEAD_GIVENC_LEN		(DESC_AEAD_ENC_LEN + 7 * CAAM_CMD_SZ)
+#define DESC_AEAD_GIVENC_LEN		(DESC_AEAD_ENC_LEN + 8 * CAAM_CMD_SZ)
 #define DESC_QI_AEAD_ENC_LEN		(DESC_AEAD_ENC_LEN + 3 * CAAM_CMD_SZ)
 #define DESC_QI_AEAD_DEC_LEN		(DESC_AEAD_DEC_LEN + 3 * CAAM_CMD_SZ)
 #define DESC_QI_AEAD_GIVENC_LEN		(DESC_AEAD_GIVENC_LEN + 3 * CAAM_CMD_SZ)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 045/148] crypto: ccree - account for TEE not ready to report
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (43 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 044/148] crypto: caam - fix concurrency issue in givencrypt descriptor Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 046/148] crypto: ccree - use the full crypt length value Greg Kroah-Hartman
                   ` (107 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gilad Ben-Yossef, Herbert Xu

From: Gilad Ben-Yossef <gilad@benyossef.com>

commit 76a95bd8f9e10cade9c4c8df93b5c20ff45dc0f5 upstream.

When ccree driver runs it checks the state of the Trusted Execution
Environment CryptoCell driver before proceeding. We did not account
for cases where the TEE side is not ready or not available at all.
Fix it by only considering TEE error state after sync with the TEE
side driver.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ab8ec9658f5a ("crypto: ccree - add FIPS support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/ccree/cc_fips.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/crypto/ccree/cc_fips.c
+++ b/drivers/crypto/ccree/cc_fips.c
@@ -21,7 +21,13 @@ static bool cc_get_tee_fips_status(struc
 	u32 reg;
 
 	reg = cc_ioread(drvdata, CC_REG(GPR_HOST));
-	return (reg == (CC_FIPS_SYNC_TEE_STATUS | CC_FIPS_SYNC_MODULE_OK));
+	/* Did the TEE report status? */
+	if (reg & CC_FIPS_SYNC_TEE_STATUS)
+		/* Yes. Is it OK? */
+		return (reg & CC_FIPS_SYNC_MODULE_OK);
+
+	/* No. It's either not in use or will be reported later */
+	return true;
 }
 
 /*



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 046/148] crypto: ccree - use the full crypt length value
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (44 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 045/148] crypto: ccree - account for TEE not ready to report Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 047/148] MIPS: Treat Loongson Extensions as ASEs Greg Kroah-Hartman
                   ` (106 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gilad Ben-Yossef, Herbert Xu

From: Gilad Ben-Yossef <gilad@benyossef.com>

commit 7a4be6c113c1f721818d1e3722a9015fe393295c upstream.

In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ff27e85a85bb ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/ccree/cc_aead.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/crypto/ccree/cc_aead.c
+++ b/drivers/crypto/ccree/cc_aead.c
@@ -236,7 +236,7 @@ static void cc_aead_complete(struct devi
 			/* In case of payload authentication failure, MUST NOT
 			 * revealed the decrypted message --> zero its memory.
 			 */
-			cc_zero_sgl(areq->dst, areq_ctx->cryptlen);
+			cc_zero_sgl(areq->dst, areq->cryptlen);
 			err = -EBADMSG;
 		}
 	} else { /*ENCRYPT*/



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 047/148] MIPS: Treat Loongson Extensions as ASEs
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (45 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 046/148] crypto: ccree - use the full crypt length value Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 048/148] power: supply: sbs-battery: use correct flags field Greg Kroah-Hartman
                   ` (105 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jiaxun Yang, Huacai Chen,
	Yunqiang Su, Paul Burton, linux-mips

From: Jiaxun Yang <jiaxun.yang@flygoat.com>

commit d2f965549006acb865c4638f1f030ebcefdc71f6 upstream.

Recently, binutils had split Loongson-3 Extensions into four ASEs:
MMI, CAM, EXT, EXT2. This patch do the samething in kernel and expose
them in cpuinfo so applications can probe supported ASEs at runtime.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Yunqiang Su <ysu@wavecomp.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/include/asm/cpu-features.h |   16 ++++++++++++++++
 arch/mips/include/asm/cpu.h          |    4 ++++
 arch/mips/kernel/cpu-probe.c         |    6 ++++++
 arch/mips/kernel/proc.c              |    4 ++++
 4 files changed, 30 insertions(+)

--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -397,6 +397,22 @@
 #define cpu_has_dsp3		__ase(MIPS_ASE_DSP3)
 #endif
 
+#ifndef cpu_has_loongson_mmi
+#define cpu_has_loongson_mmi		__ase(MIPS_ASE_LOONGSON_MMI)
+#endif
+
+#ifndef cpu_has_loongson_cam
+#define cpu_has_loongson_cam		__ase(MIPS_ASE_LOONGSON_CAM)
+#endif
+
+#ifndef cpu_has_loongson_ext
+#define cpu_has_loongson_ext		__ase(MIPS_ASE_LOONGSON_EXT)
+#endif
+
+#ifndef cpu_has_loongson_ext2
+#define cpu_has_loongson_ext2		__ase(MIPS_ASE_LOONGSON_EXT2)
+#endif
+
 #ifndef cpu_has_mipsmt
 #define cpu_has_mipsmt		__isa_lt_and_ase(6, MIPS_ASE_MIPSMT)
 #endif
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -433,5 +433,9 @@ enum cpu_type_enum {
 #define MIPS_ASE_MSA		0x00000100 /* MIPS SIMD Architecture */
 #define MIPS_ASE_DSP3		0x00000200 /* Signal Processing ASE Rev 3*/
 #define MIPS_ASE_MIPS16E2	0x00000400 /* MIPS16e2 */
+#define MIPS_ASE_LOONGSON_MMI	0x00000800 /* Loongson MultiMedia extensions Instructions */
+#define MIPS_ASE_LOONGSON_CAM	0x00001000 /* Loongson CAM */
+#define MIPS_ASE_LOONGSON_EXT	0x00002000 /* Loongson EXTensions */
+#define MIPS_ASE_LOONGSON_EXT2	0x00004000 /* Loongson EXTensions R2 */
 
 #endif /* _ASM_CPU_H */
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1573,6 +1573,8 @@ static inline void cpu_probe_legacy(stru
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3a");
 			set_isa(c, MIPS_CPU_ISA_M64R1);
+			c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
+				MIPS_ASE_LOONGSON_EXT);
 			break;
 		case PRID_REV_LOONGSON3B_R1:
 		case PRID_REV_LOONGSON3B_R2:
@@ -1580,6 +1582,8 @@ static inline void cpu_probe_legacy(stru
 			__cpu_name[cpu] = "ICT Loongson-3";
 			set_elf_platform(cpu, "loongson3b");
 			set_isa(c, MIPS_CPU_ISA_M64R1);
+			c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
+				MIPS_ASE_LOONGSON_EXT);
 			break;
 		}
 
@@ -1946,6 +1950,8 @@ static inline void cpu_probe_loongson(st
 		decode_configs(c);
 		c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE;
 		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
+		c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM |
+			MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2);
 		break;
 	default:
 		panic("Unknown Loongson Processor ID!");
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -124,6 +124,10 @@ static int show_cpuinfo(struct seq_file
 	if (cpu_has_eva)	seq_printf(m, "%s", " eva");
 	if (cpu_has_htw)	seq_printf(m, "%s", " htw");
 	if (cpu_has_xpa)	seq_printf(m, "%s", " xpa");
+	if (cpu_has_loongson_mmi)	seq_printf(m, "%s", " loongson-mmi");
+	if (cpu_has_loongson_cam)	seq_printf(m, "%s", " loongson-cam");
+	if (cpu_has_loongson_ext)	seq_printf(m, "%s", " loongson-ext");
+	if (cpu_has_loongson_ext2)	seq_printf(m, "%s", " loongson-ext2");
 	seq_printf(m, "\n");
 
 	if (cpu_has_mmips) {



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 048/148] power: supply: sbs-battery: use correct flags field
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (46 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 047/148] MIPS: Treat Loongson Extensions as ASEs Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 049/148] power: supply: sbs-battery: only return health when battery present Greg Kroah-Hartman
                   ` (104 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michael Nosthoff, Brian Norris,
	Enric Balletbo i Serra, Sebastian Reichel

From: Michael Nosthoff <committed@heine.so>

commit 99956a9e08251a1234434b492875b1eaff502a12 upstream.

the type flag is stored in the chip->flags field not in the
client->flags field. This currently leads to never using the ti
specific health function as client->flags doesn't use that bit.
So it's always falling back to the general one.

Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/sbs-battery.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -620,7 +620,7 @@ static int sbs_get_property(struct power
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 	case POWER_SUPPLY_PROP_HEALTH:
-		if (client->flags & SBS_FLAGS_TI_BQ20Z75)
+		if (chip->flags & SBS_FLAGS_TI_BQ20Z75)
 			ret = sbs_get_ti_battery_presence_and_health(client,
 								     psp, val);
 		else



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 049/148] power: supply: sbs-battery: only return health when battery present
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (47 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 048/148] power: supply: sbs-battery: use correct flags field Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 050/148] tracing: Make sure variable reference alias has correct var_ref_idx Greg Kroah-Hartman
                   ` (103 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michael Nosthoff, Brian Norris,
	Sebastian Reichel

From: Michael Nosthoff <committed@heine.so>

commit fe55e770327363304c4111423e6f7ff3c650136d upstream.

when the battery is set to sbs-mode and  no gpio detection is enabled
"health" is always returning a value even when the battery is not present.
All other fields return "not present".
This leads to a scenario where the driver is constantly switching between
"present" and "not present" state. This generates a lot of constant
traffic on the i2c.

This commit changes the response of "health" to an error when the battery
is not responding leading to a consistent "not present" state.

Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/supply/sbs-battery.c |   25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

--- a/drivers/power/supply/sbs-battery.c
+++ b/drivers/power/supply/sbs-battery.c
@@ -314,17 +314,22 @@ static int sbs_get_battery_presence_and_
 {
 	int ret;
 
-	if (psp == POWER_SUPPLY_PROP_PRESENT) {
-		/* Dummy command; if it succeeds, battery is present. */
-		ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
-		if (ret < 0)
-			val->intval = 0; /* battery disconnected */
-		else
-			val->intval = 1; /* battery present */
-	} else { /* POWER_SUPPLY_PROP_HEALTH */
+	/* Dummy command; if it succeeds, battery is present. */
+	ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+	if (ret < 0) { /* battery not present*/
+		if (psp == POWER_SUPPLY_PROP_PRESENT) {
+			val->intval = 0;
+			return 0;
+		}
+		return ret;
+	}
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT)
+		val->intval = 1; /* battery present */
+	else /* POWER_SUPPLY_PROP_HEALTH */
 		/* SBS spec doesn't have a general health command. */
 		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
-	}
 
 	return 0;
 }
@@ -626,6 +631,8 @@ static int sbs_get_property(struct power
 		else
 			ret = sbs_get_battery_presence_and_health(client, psp,
 								  val);
+
+		/* this can only be true if no gpio is used */
 		if (psp == POWER_SUPPLY_PROP_PRESENT)
 			return 0;
 		break;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 050/148] tracing: Make sure variable reference alias has correct var_ref_idx
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (48 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 049/148] power: supply: sbs-battery: only return health when battery present Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 051/148] usercopy: Avoid HIGHMEM pfn warning Greg Kroah-Hartman
                   ` (102 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Linux Trace Devel, linux-rt-users,
	Steven Rostedt (VMware),
	Tom Zanussi

From: Tom Zanussi <zanussi@kernel.org>

commit 17f8607a1658a8e70415eef67909f990d13017b5 upstream.

Original changelog from Steve Rostedt (except last sentence which
explains the problem, and the Fixes: tag):

I performed a three way histogram with the following commands:

echo 'irq_lat u64 lat pid_t pid' > synthetic_events
echo 'wake_lat u64 lat u64 irqlat pid_t pid' >> synthetic_events
echo 'hist:keys=common_pid:irqts=common_timestamp.usecs if function == 0xffffffff81200580' > events/timer/hrtimer_start/trigger
echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$irqts:onmatch(timer.hrtimer_start).irq_lat($lat,pid) if common_flags & 1' > events/sched/sched_waking/trigger
echo 'hist:keys=pid:wakets=common_timestamp.usecs,irqlat=lat' > events/synthetic/irq_lat/trigger
echo 'hist:keys=next_pid:lat=common_timestamp.usecs-$wakets,irqlat=$irqlat:onmatch(synthetic.irq_lat).wake_lat($lat,$irqlat,next_pid)' > events/sched/sched_switch/trigger
echo 1 > events/synthetic/wake_lat/enable

Basically I wanted to see:

 hrtimer_start (calling function tick_sched_timer)

Note:

  # grep tick_sched_timer /proc/kallsyms
ffffffff81200580 t tick_sched_timer

And save the time of that, and then record sched_waking if it is called
in interrupt context and with the same pid as the hrtimer_start, it
will record the latency between that and the waking event.

I then look at when the task that is woken is scheduled in, and record
the latency between the wakeup and the task running.

At the end, the wake_lat synthetic event will show the wakeup to
scheduled latency, as well as the irq latency in from hritmer_start to
the wakeup. The problem is that I found this:

          <idle>-0     [007] d...   190.485261: wake_lat: lat=27 irqlat=190485230 pid=698
          <idle>-0     [005] d...   190.485283: wake_lat: lat=40 irqlat=190485239 pid=10
          <idle>-0     [002] d...   190.488327: wake_lat: lat=56 irqlat=190488266 pid=335
          <idle>-0     [005] d...   190.489330: wake_lat: lat=64 irqlat=190489262 pid=10
          <idle>-0     [003] d...   190.490312: wake_lat: lat=43 irqlat=190490265 pid=77
          <idle>-0     [005] d...   190.493322: wake_lat: lat=54 irqlat=190493262 pid=10
          <idle>-0     [005] d...   190.497305: wake_lat: lat=35 irqlat=190497267 pid=10
          <idle>-0     [005] d...   190.501319: wake_lat: lat=50 irqlat=190501264 pid=10

The irqlat seemed quite large! Investigating this further, if I had
enabled the irq_lat synthetic event, I noticed this:

          <idle>-0     [002] d.s.   249.429308: irq_lat: lat=164968 pid=335
          <idle>-0     [002] d...   249.429369: wake_lat: lat=55 irqlat=249429308 pid=335

Notice that the timestamp of the irq_lat "249.429308" is awfully
similar to the reported irqlat variable. In fact, all instances were
like this. It appeared that:

  irqlat=$irqlat

Wasn't assigning the old $irqlat to the new irqlat variable, but
instead was assigning the $irqts to it.

The issue is that assigning the old $irqlat to the new irqlat variable
creates a variable reference alias, but the alias creation code
forgets to make sure the alias uses the same var_ref_idx to access the
reference.

Link: http://lkml.kernel.org/r/1567375321.5282.12.camel@kernel.org

Cc: Linux Trace Devel <linux-trace-devel@vger.kernel.org>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7e8b88a30b085 ("tracing: Add hist trigger support for variable reference aliases")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_events_hist.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2785,6 +2785,8 @@ static struct hist_field *create_alias(s
 		return NULL;
 	}
 
+	alias->var_ref_idx = var_ref->var_ref_idx;
+
 	return alias;
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 051/148] usercopy: Avoid HIGHMEM pfn warning
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (49 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 050/148] tracing: Make sure variable reference alias has correct var_ref_idx Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 052/148] timer: Read jiffies once when forwarding base clk Greg Kroah-Hartman
                   ` (101 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Randy Dunlap, Matthew Wilcox, Kees Cook

From: Kees Cook <keescook@chromium.org>

commit 314eed30ede02fa925990f535652254b5bad6b65 upstream.

When running on a system with >512MB RAM with a 32-bit kernel built with:

	CONFIG_DEBUG_VIRTUAL=y
	CONFIG_HIGHMEM=y
	CONFIG_HARDENED_USERCOPY=y

all execve()s will fail due to argv copying into kmap()ed pages, and on
usercopy checking the calls ultimately of virt_to_page() will be looking
for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y:

 ------------[ cut here ]------------
 kernel BUG at ../arch/x86/mm/physaddr.c:83!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6
 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009
 EIP: __phys_addr+0xaf/0x100
 ...
 Call Trace:
  __check_object_size+0xaf/0x3c0
  ? __might_sleep+0x80/0xa0
  copy_strings+0x1c2/0x370
  copy_strings_kernel+0x2b/0x40
  __do_execve_file+0x4ca/0x810
  ? kmem_cache_alloc+0x1c7/0x370
  do_execve+0x1b/0x20
  ...

The check is from arch/x86/mm/physaddr.c:

	VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn);

Due to the kmap() in fs/exec.c:

		kaddr = kmap(kmapped_page);
	...
	if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ...

Now we can fetch the correct page to avoid the pfn check. In both cases,
hardened usercopy will need to walk the page-span checker (if enabled)
to do sanity checking.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f5509cc18daa ("mm: Hardened usercopy")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/usercopy.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/mm/usercopy.c
+++ b/mm/usercopy.c
@@ -11,6 +11,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/mm.h>
+#include <linux/highmem.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/sched/task.h>
@@ -227,7 +228,12 @@ static inline void check_heap_object(con
 	if (!virt_addr_valid(ptr))
 		return;
 
-	page = virt_to_head_page(ptr);
+	/*
+	 * When CONFIG_HIGHMEM=y, kmap_to_page() will give either the
+	 * highmem page or fallback to virt_to_page(). The following
+	 * is effectively a highmem-aware virt_to_head_page().
+	 */
+	page = compound_head(kmap_to_page((void *)ptr));
 
 	if (PageSlab(page)) {
 		/* Check slab allocator for flags and size. */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 052/148] timer: Read jiffies once when forwarding base clk
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (50 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 051/148] usercopy: Avoid HIGHMEM pfn warning Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 053/148] PCI: vmd: Fix config addressing when using bus offsets Greg Kroah-Hartman
                   ` (100 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Li RongQing, Liang ZhiCheng, Thomas Gleixner

From: Li RongQing <lirongqing@baidu.com>

commit e430d802d6a3aaf61bd3ed03d9404888a29b9bf9 upstream.

The timer delayed for more than 3 seconds warning was triggered during
testing.

  Workqueue: events_unbound sched_tick_remote
  RIP: 0010:sched_tick_remote+0xee/0x100
  ...
  Call Trace:
   process_one_work+0x18c/0x3a0
   worker_thread+0x30/0x380
   kthread+0x113/0x130
   ret_from_fork+0x22/0x40

The reason is that the code in collect_expired_timers() uses jiffies
unprotected:

    if (next_event > jiffies)
        base->clk = jiffies;

As the compiler is allowed to reload the value base->clk can advance
between the check and the store and in the worst case advance farther than
next event. That causes the timer expiry to be delayed until the wheel
pointer wraps around.

Convert the code to use READ_ONCE()

Fixes: 236968383cf5 ("timers: Optimize collect_expired_timers() for NOHZ")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Liang ZhiCheng <liangzhicheng@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timer.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -1593,24 +1593,26 @@ void timer_clear_idle(void)
 static int collect_expired_timers(struct timer_base *base,
 				  struct hlist_head *heads)
 {
+	unsigned long now = READ_ONCE(jiffies);
+
 	/*
 	 * NOHZ optimization. After a long idle sleep we need to forward the
 	 * base to current jiffies. Avoid a loop by searching the bitfield for
 	 * the next expiring timer.
 	 */
-	if ((long)(jiffies - base->clk) > 2) {
+	if ((long)(now - base->clk) > 2) {
 		unsigned long next = __next_timer_interrupt(base);
 
 		/*
 		 * If the next timer is ahead of time forward to current
 		 * jiffies, otherwise forward to the next expiry time:
 		 */
-		if (time_after(next, jiffies)) {
+		if (time_after(next, now)) {
 			/*
 			 * The call site will increment base->clk and then
 			 * terminate the expiry loop immediately.
 			 */
-			base->clk = jiffies;
+			base->clk = now;
 			return 0;
 		}
 		base->clk = next;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 053/148] PCI: vmd: Fix config addressing when using bus offsets
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (51 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 052/148] timer: Read jiffies once when forwarding base clk Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 054/148] PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it Greg Kroah-Hartman
                   ` (99 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jon Derrick, Lorenzo Pieralisi

From: Jon Derrick <jonathan.derrick@intel.com>

commit e3dffa4f6c3612dea337c9c59191bd418afc941b upstream.

VMD maps child device config spaces to the VMD Config BAR linearly
regardless of the starting bus offset. Because of this, the config
address decode must ignore starting bus offsets when mapping the BDF to
the config space address.

Fixes: 2a5a9c9a20f9 ("PCI: vmd: Add offset to bus numbers if necessary")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/vmd.c |   16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -94,6 +94,7 @@ struct vmd_dev {
 	struct resource		resources[3];
 	struct irq_domain	*irq_domain;
 	struct pci_bus		*bus;
+	u8			busn_start;
 
 	struct dma_map_ops	dma_ops;
 	struct dma_domain	dma_domain;
@@ -440,7 +441,8 @@ static char __iomem *vmd_cfg_addr(struct
 				  unsigned int devfn, int reg, int len)
 {
 	char __iomem *addr = vmd->cfgbar +
-			     (bus->number << 20) + (devfn << 12) + reg;
+			     ((bus->number - vmd->busn_start) << 20) +
+			     (devfn << 12) + reg;
 
 	if ((addr - vmd->cfgbar) + len >=
 	    resource_size(&vmd->dev->resource[VMD_CFGBAR]))
@@ -563,7 +565,7 @@ static int vmd_enable_domain(struct vmd_
 	unsigned long flags;
 	LIST_HEAD(resources);
 	resource_size_t offset[2] = {0};
-	resource_size_t membar2_offset = 0x2000, busn_start = 0;
+	resource_size_t membar2_offset = 0x2000;
 	struct pci_bus *child;
 
 	/*
@@ -606,14 +608,14 @@ static int vmd_enable_domain(struct vmd_
 		pci_read_config_dword(vmd->dev, PCI_REG_VMCONFIG, &vmconfig);
 		if (BUS_RESTRICT_CAP(vmcap) &&
 		    (BUS_RESTRICT_CFG(vmconfig) == 0x1))
-			busn_start = 128;
+			vmd->busn_start = 128;
 	}
 
 	res = &vmd->dev->resource[VMD_CFGBAR];
 	vmd->resources[0] = (struct resource) {
 		.name  = "VMD CFGBAR",
-		.start = busn_start,
-		.end   = busn_start + (resource_size(res) >> 20) - 1,
+		.start = vmd->busn_start,
+		.end   = vmd->busn_start + (resource_size(res) >> 20) - 1,
 		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
 	};
 
@@ -681,8 +683,8 @@ static int vmd_enable_domain(struct vmd_
 	pci_add_resource_offset(&resources, &vmd->resources[1], offset[0]);
 	pci_add_resource_offset(&resources, &vmd->resources[2], offset[1]);
 
-	vmd->bus = pci_create_root_bus(&vmd->dev->dev, busn_start, &vmd_ops,
-				       sd, &resources);
+	vmd->bus = pci_create_root_bus(&vmd->dev->dev, vmd->busn_start,
+				       &vmd_ops, sd, &resources);
 	if (!vmd->bus) {
 		pci_free_resource_list(&resources);
 		irq_domain_remove(vmd->irq_domain);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 054/148] PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (52 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 053/148] PCI: vmd: Fix config addressing when using bus offsets Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 055/148] PCI: vmd: Fix shadow offsets to reflect spec changes Greg Kroah-Hartman
                   ` (98 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dexuan Cui, Lorenzo Pieralisi

From: Dexuan Cui <decui@microsoft.com>

commit 533ca1feed98b0bf024779a14760694c7cb4d431 upstream.

The slot must be removed before the pci_dev is removed, otherwise a panic
can happen due to use-after-free.

Fixes: 15becc2b56c6 ("PCI: hv: Add hv_pci_remove_slots() when we unload the driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/pci-hyperv.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -2701,8 +2701,8 @@ static int hv_pci_remove(struct hv_devic
 		/* Remove the bus from PCI's point of view. */
 		pci_lock_rescan_remove();
 		pci_stop_root_bus(hbus->pci_bus);
-		pci_remove_root_bus(hbus->pci_bus);
 		hv_pci_remove_slots(hbus);
+		pci_remove_root_bus(hbus->pci_bus);
 		pci_unlock_rescan_remove();
 		hbus->state = hv_pcibus_removed;
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 055/148] PCI: vmd: Fix shadow offsets to reflect spec changes
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (53 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 054/148] PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 056/148] PCI: Restore Resizable BAR size bits correctly for 1MB BARs Greg Kroah-Hartman
                   ` (97 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jon Derrick, Lorenzo Pieralisi

From: Jon Derrick <jonathan.derrick@intel.com>

commit a1a30170138c9c5157bd514ccd4d76b47060f29b upstream.

The shadow offset scratchpad was moved to 0x2000-0x2010. Update the
location to get the correct shadow offset.

Fixes: 6788958e4f3c ("PCI: vmd: Assign membar addresses from shadow registers")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/controller/vmd.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -31,6 +31,9 @@
 #define PCI_REG_VMLOCK		0x70
 #define MB2_SHADOW_EN(vmlock)	(vmlock & 0x2)
 
+#define MB2_SHADOW_OFFSET	0x2000
+#define MB2_SHADOW_SIZE		16
+
 enum vmd_features {
 	/*
 	 * Device may contain registers which hint the physical location of the
@@ -578,7 +581,7 @@ static int vmd_enable_domain(struct vmd_
 		u32 vmlock;
 		int ret;
 
-		membar2_offset = 0x2018;
+		membar2_offset = MB2_SHADOW_OFFSET + MB2_SHADOW_SIZE;
 		ret = pci_read_config_dword(vmd->dev, PCI_REG_VMLOCK, &vmlock);
 		if (ret || vmlock == ~0)
 			return -ENODEV;
@@ -590,9 +593,9 @@ static int vmd_enable_domain(struct vmd_
 			if (!membar2)
 				return -ENOMEM;
 			offset[0] = vmd->dev->resource[VMD_MEMBAR1].start -
-						readq(membar2 + 0x2008);
+					readq(membar2 + MB2_SHADOW_OFFSET);
 			offset[1] = vmd->dev->resource[VMD_MEMBAR2].start -
-						readq(membar2 + 0x2010);
+					readq(membar2 + MB2_SHADOW_OFFSET + 8);
 			pci_iounmap(vmd->dev, membar2);
 		}
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 056/148] PCI: Restore Resizable BAR size bits correctly for 1MB BARs
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (54 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 055/148] PCI: vmd: Fix shadow offsets to reflect spec changes Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 057/148] selftests/tpm2: Add the missing TEST_FILES assignment Greg Kroah-Hartman
                   ` (96 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sumit Saxena, Bjorn Helgaas,
	Christian König

From: Sumit Saxena <sumit.saxena@broadcom.com>

commit d2182b2d4b71ff0549a07f414d921525fade707b upstream.

In a Resizable BAR Control Register, bits 13:8 control the size of the BAR.
The encoded values of these bits are as follows (see PCIe r5.0, sec
7.8.6.3):

  Value    BAR size
     0     1 MB (2^20 bytes)
     1     2 MB (2^21 bytes)
     2     4 MB (2^22 bytes)
   ...
    43     8 EB (2^63 bytes)

Previously we incorrectly set the BAR size bits for a 1 MB BAR to 0x1f
instead of 0, so devices that support that size, e.g., new megaraid_sas and
mpt3sas adapters, fail to initialize during resume from S3 sleep.

Correctly calculate the BAR size bits for Resizable BAR control registers.

Link: https://lore.kernel.org/r/20190725192552.24295-1-sumit.saxena@broadcom.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203939
Fixes: d3252ace0bc6 ("PCI: Restore resized BAR state on resume")
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org	# v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1443,7 +1443,7 @@ static void pci_restore_rebar_state(stru
 		pci_read_config_dword(pdev, pos + PCI_REBAR_CTRL, &ctrl);
 		bar_idx = ctrl & PCI_REBAR_CTRL_BAR_IDX;
 		res = pdev->resource + bar_idx;
-		size = order_base_2((resource_size(res) >> 20) | 1) - 1;
+		size = ilog2(resource_size(res)) - 20;
 		ctrl &= ~PCI_REBAR_CTRL_BAR_SIZE;
 		ctrl |= size << PCI_REBAR_CTRL_BAR_SHIFT;
 		pci_write_config_dword(pdev, pos + PCI_REBAR_CTRL, ctrl);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 057/148] selftests/tpm2: Add the missing TEST_FILES assignment
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (55 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 056/148] PCI: Restore Resizable BAR size bits correctly for 1MB BARs Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 058/148] selftests: pidfd: Fix undefined reference to pthread_create() Greg Kroah-Hartman
                   ` (95 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jarkko Sakkinen, Petr Vorel

From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

commit 981c107cbb420ee028f8ecd155352cfd6351c246 upstream.

The Python files required by the selftests are not packaged because of
the missing assignment to TEST_FILES. Add the assignment.

Cc: stable@vger.kernel.org
Fixes: 6ea3dfe1e073 ("selftests: add TPM 2.0 tests")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/tpm2/Makefile |    1 +
 1 file changed, 1 insertion(+)

--- a/tools/testing/selftests/tpm2/Makefile
+++ b/tools/testing/selftests/tpm2/Makefile
@@ -2,3 +2,4 @@
 include ../lib.mk
 
 TEST_PROGS := test_smoke.sh test_space.sh
+TEST_FILES := tpm2.py tpm2_tests.py



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 058/148] selftests: pidfd: Fix undefined reference to pthread_create()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (56 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 057/148] selftests/tpm2: Add the missing TEST_FILES assignment Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 059/148] watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout Greg Kroah-Hartman
                   ` (94 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Shuah Khan, Christian Brauner

From: Shuah Khan <skhan@linuxfoundation.org>

commit 3969e76909d3aa06715997896184ee684f68d164 upstream.

Fix build failure:

undefined reference to `pthread_create'
collect2: error: ld returned 1 exit status

Fix CFLAGS to include pthread correctly.

Fixes: 740378dc7834 ("pidfd: add polling selftests")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190924195237.30519-1-skhan@linuxfoundation.org
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/pidfd/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/pidfd/Makefile
+++ b/tools/testing/selftests/pidfd/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
-CFLAGS += -g -I../../../../usr/include/ -lpthread
+CFLAGS += -g -I../../../../usr/include/ -pthread
 
 TEST_GEN_PROGS := pidfd_test pidfd_open_test
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 059/148] watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (57 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 058/148] selftests: pidfd: Fix undefined reference to pthread_create() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 061/148] perf stat: Fix a segmentation fault when using repeat forever Greg Kroah-Hartman
                   ` (93 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Rasmus Villemoes, Guenter Roeck,
	Wim Van Sebroeck

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

commit 144783a80cd2cbc45c6ce17db649140b65f203dd upstream.

Converting from ms to s requires dividing by 1000, not multiplying. So
this is currently taking the smaller of new_timeout and 1.28e8,
i.e. effectively new_timeout.

The driver knows what it set max_hw_heartbeat_ms to, so use that
value instead of doing a division at run-time.

FWIW, this can easily be tested by booting into a busybox shell and
doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the
watchdog fires after 130&127 == 2 seconds.

Fixes: b07e228eee69 "watchdog: imx2_wdt: Fix set_timeout for big timeout values"
Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/watchdog/imx2_wdt.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -55,7 +55,7 @@
 
 #define IMX2_WDT_WMCR		0x08		/* Misc Register */
 
-#define IMX2_WDT_MAX_TIME	128
+#define IMX2_WDT_MAX_TIME	128U
 #define IMX2_WDT_DEFAULT_TIME	60		/* in seconds */
 
 #define WDOG_SEC_TO_COUNT(s)	((s * 2 - 1) << 8)
@@ -180,7 +180,7 @@ static int imx2_wdt_set_timeout(struct w
 {
 	unsigned int actual;
 
-	actual = min(new_timeout, wdog->max_hw_heartbeat_ms * 1000);
+	actual = min(new_timeout, IMX2_WDT_MAX_TIME);
 	__imx2_wdt_set_timeout(wdog, actual);
 	wdog->timeout = new_timeout;
 	return 0;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 061/148] perf stat: Fix a segmentation fault when using repeat forever
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (58 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 059/148] watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 062/148] drm/i915/dp: Fix dsc bpp calculations, v5 Greg Kroah-Hartman
                   ` (92 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Srikar Dronamraju, Jiri Olsa,
	Arnaldo Carvalho de Melo, Ravi Bangoria, Namhyung Kim,
	Naveen N. Rao

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

commit 443f2d5ba13d65ccfd879460f77941875159d154 upstream.

Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  #5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  #6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  #5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  #6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  #7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a4741a8 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/builtin-stat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1962,7 +1962,7 @@ int cmd_stat(int argc, const char **argv
 				run_idx + 1);
 
 		status = run_perf_stat(argc, argv, run_idx);
-		if (forever && status != -1) {
+		if (forever && status != -1 && !interval) {
 			print_counters(NULL, argc, argv);
 			perf_stat__reset_stats();
 		}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 062/148] drm/i915/dp: Fix dsc bpp calculations, v5.
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (59 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 061/148] perf stat: Fix a segmentation fault when using repeat forever Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 063/148] drm/atomic: Reject FLIP_ASYNC unconditionally Greg Kroah-Hartman
                   ` (91 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maarten Lankhorst, Manasi Navare,
	Ville Syrjälä,
	Rodrigo Vivi

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

commit cffb4c3ea37248c4fc2f4ce747e5c24af88aec76 upstream.

There was a integer wraparound when mode_clock became too high,
and we didn't correct for the FEC overhead factor when dividing,
with the calculations breaking at HBR3.

As a result our calculated bpp was way too high, and the link width
limitation never came into effect.

Print out the resulting bpp calcululations as a sanity check, just
in case we ever have to debug it later on again.

We also used the wrong factor for FEC. While bspec mentions 2.4%,
all the calculations use 1/0.972261, and the same ratio should be
applied to data M/N as well, so use it there when FEC is enabled.

This fixes the FIFO underrun we are seeing with FEC enabled.

Changes since v2:
- Handle fec_enable in intel_link_compute_m_n, so only data M/N is adjusted. (Ville)
- Fix initial hardware readout for FEC. (Ville)
Changes since v3:
- Remove bogus fec_to_mode_clock. (Ville)
Changes since v4:
- Use the correct register for icl. (Ville)
- Split hw readout to a separate patch.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: d9218c8f6cf4 ("drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC")
Cc: <stable@vger.kernel.org> # v5.0+
Cc: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925082110.17439-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit ed06efb801bd291e935238d3fba46fa03d098f0e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/display/intel_display.c |   12 +
 drivers/gpu/drm/i915/display/intel_display.h |    2 
 drivers/gpu/drm/i915/display/intel_dp.c      |  184 +++++++++++++--------------
 drivers/gpu/drm/i915/display/intel_dp.h      |    6 
 drivers/gpu/drm/i915/display/intel_dp_mst.c  |    2 
 5 files changed, 107 insertions(+), 99 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -7132,7 +7132,7 @@ retry:
 	pipe_config->fdi_lanes = lane;
 
 	intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
-			       link_bw, &pipe_config->fdi_m_n, false);
+			       link_bw, &pipe_config->fdi_m_n, false, false);
 
 	ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
 	if (ret == -EDEADLK)
@@ -7379,11 +7379,15 @@ void
 intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
 		       int pixel_clock, int link_clock,
 		       struct intel_link_m_n *m_n,
-		       bool constant_n)
+		       bool constant_n, bool fec_enable)
 {
-	m_n->tu = 64;
+	u32 data_clock = bits_per_pixel * pixel_clock;
+
+	if (fec_enable)
+		data_clock = intel_dp_mode_to_fec_clock(data_clock);
 
-	compute_m_n(bits_per_pixel * pixel_clock,
+	m_n->tu = 64;
+	compute_m_n(data_clock,
 		    link_clock * nlanes * 8,
 		    &m_n->gmch_m, &m_n->gmch_n,
 		    constant_n);
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -351,7 +351,7 @@ struct intel_link_m_n {
 void intel_link_compute_m_n(u16 bpp, int nlanes,
 			    int pixel_clock, int link_clock,
 			    struct intel_link_m_n *m_n,
-			    bool constant_n);
+			    bool constant_n, bool fec_enable);
 bool is_ccs_modifier(u64 modifier);
 void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
 u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -76,8 +76,8 @@
 #define DP_DSC_MAX_ENC_THROUGHPUT_0		340000
 #define DP_DSC_MAX_ENC_THROUGHPUT_1		400000
 
-/* DP DSC FEC Overhead factor = (100 - 2.4)/100 */
-#define DP_DSC_FEC_OVERHEAD_FACTOR		976
+/* DP DSC FEC Overhead factor = 1/(0.972261) */
+#define DP_DSC_FEC_OVERHEAD_FACTOR		972261
 
 /* Compliance test status bits  */
 #define INTEL_DP_RESOLUTION_SHIFT_MASK	0
@@ -526,6 +526,97 @@ int intel_dp_get_link_train_fallback_val
 	return 0;
 }
 
+u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
+{
+	return div_u64(mul_u32_u32(mode_clock, 1000000U),
+		       DP_DSC_FEC_OVERHEAD_FACTOR);
+}
+
+static u16 intel_dp_dsc_get_output_bpp(u32 link_clock, u32 lane_count,
+				       u32 mode_clock, u32 mode_hdisplay)
+{
+	u32 bits_per_pixel, max_bpp_small_joiner_ram;
+	int i;
+
+	/*
+	 * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)*
+	 * (LinkSymbolClock)* 8 * (TimeSlotsPerMTP)
+	 * for SST -> TimeSlotsPerMTP is 1,
+	 * for MST -> TimeSlotsPerMTP has to be calculated
+	 */
+	bits_per_pixel = (link_clock * lane_count * 8) /
+			 intel_dp_mode_to_fec_clock(mode_clock);
+	DRM_DEBUG_KMS("Max link bpp: %u\n", bits_per_pixel);
+
+	/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
+	max_bpp_small_joiner_ram = DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER / mode_hdisplay;
+	DRM_DEBUG_KMS("Max small joiner bpp: %u\n", max_bpp_small_joiner_ram);
+
+	/*
+	 * Greatest allowed DSC BPP = MIN (output BPP from available Link BW
+	 * check, output bpp from small joiner RAM check)
+	 */
+	bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
+
+	/* Error out if the max bpp is less than smallest allowed valid bpp */
+	if (bits_per_pixel < valid_dsc_bpp[0]) {
+		DRM_DEBUG_KMS("Unsupported BPP %u, min %u\n",
+			      bits_per_pixel, valid_dsc_bpp[0]);
+		return 0;
+	}
+
+	/* Find the nearest match in the array of known BPPs from VESA */
+	for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
+		if (bits_per_pixel < valid_dsc_bpp[i + 1])
+			break;
+	}
+	bits_per_pixel = valid_dsc_bpp[i];
+
+	/*
+	 * Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
+	 * fractional part is 0
+	 */
+	return bits_per_pixel << 4;
+}
+
+static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
+				       int mode_clock, int mode_hdisplay)
+{
+	u8 min_slice_count, i;
+	int max_slice_width;
+
+	if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE)
+		min_slice_count = DIV_ROUND_UP(mode_clock,
+					       DP_DSC_MAX_ENC_THROUGHPUT_0);
+	else
+		min_slice_count = DIV_ROUND_UP(mode_clock,
+					       DP_DSC_MAX_ENC_THROUGHPUT_1);
+
+	max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd);
+	if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) {
+		DRM_DEBUG_KMS("Unsupported slice width %d by DP DSC Sink device\n",
+			      max_slice_width);
+		return 0;
+	}
+	/* Also take into account max slice width */
+	min_slice_count = min_t(u8, min_slice_count,
+				DIV_ROUND_UP(mode_hdisplay,
+					     max_slice_width));
+
+	/* Find the closest match to the valid slice count values */
+	for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
+		if (valid_dsc_slicecount[i] >
+		    drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
+						    false))
+			break;
+		if (min_slice_count  <= valid_dsc_slicecount[i])
+			return valid_dsc_slicecount[i];
+	}
+
+	DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
+	return 0;
+}
+
 static enum drm_mode_status
 intel_dp_mode_valid(struct drm_connector *connector,
 		    struct drm_display_mode *mode)
@@ -2248,7 +2339,7 @@ intel_dp_compute_config(struct intel_enc
 			       adjusted_mode->crtc_clock,
 			       pipe_config->port_clock,
 			       &pipe_config->dp_m_n,
-			       constant_n);
+			       constant_n, pipe_config->fec_enable);
 
 	if (intel_connector->panel.downclock_mode != NULL &&
 		dev_priv->drrs.type == SEAMLESS_DRRS_SUPPORT) {
@@ -2258,7 +2349,7 @@ intel_dp_compute_config(struct intel_enc
 					       intel_connector->panel.downclock_mode->clock,
 					       pipe_config->port_clock,
 					       &pipe_config->dp_m2_n2,
-					       constant_n);
+					       constant_n, pipe_config->fec_enable);
 	}
 
 	if (!HAS_DDI(dev_priv))
@@ -4345,91 +4436,6 @@ intel_dp_get_sink_irq_esi(struct intel_d
 		DP_DPRX_ESI_LEN;
 }
 
-u16 intel_dp_dsc_get_output_bpp(int link_clock, u8 lane_count,
-				int mode_clock, int mode_hdisplay)
-{
-	u16 bits_per_pixel, max_bpp_small_joiner_ram;
-	int i;
-
-	/*
-	 * Available Link Bandwidth(Kbits/sec) = (NumberOfLanes)*
-	 * (LinkSymbolClock)* 8 * ((100-FECOverhead)/100)*(TimeSlotsPerMTP)
-	 * FECOverhead = 2.4%, for SST -> TimeSlotsPerMTP is 1,
-	 * for MST -> TimeSlotsPerMTP has to be calculated
-	 */
-	bits_per_pixel = (link_clock * lane_count * 8 *
-			  DP_DSC_FEC_OVERHEAD_FACTOR) /
-		mode_clock;
-
-	/* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
-	max_bpp_small_joiner_ram = DP_DSC_MAX_SMALL_JOINER_RAM_BUFFER /
-		mode_hdisplay;
-
-	/*
-	 * Greatest allowed DSC BPP = MIN (output BPP from avaialble Link BW
-	 * check, output bpp from small joiner RAM check)
-	 */
-	bits_per_pixel = min(bits_per_pixel, max_bpp_small_joiner_ram);
-
-	/* Error out if the max bpp is less than smallest allowed valid bpp */
-	if (bits_per_pixel < valid_dsc_bpp[0]) {
-		DRM_DEBUG_KMS("Unsupported BPP %d\n", bits_per_pixel);
-		return 0;
-	}
-
-	/* Find the nearest match in the array of known BPPs from VESA */
-	for (i = 0; i < ARRAY_SIZE(valid_dsc_bpp) - 1; i++) {
-		if (bits_per_pixel < valid_dsc_bpp[i + 1])
-			break;
-	}
-	bits_per_pixel = valid_dsc_bpp[i];
-
-	/*
-	 * Compressed BPP in U6.4 format so multiply by 16, for Gen 11,
-	 * fractional part is 0
-	 */
-	return bits_per_pixel << 4;
-}
-
-u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
-				int mode_clock,
-				int mode_hdisplay)
-{
-	u8 min_slice_count, i;
-	int max_slice_width;
-
-	if (mode_clock <= DP_DSC_PEAK_PIXEL_RATE)
-		min_slice_count = DIV_ROUND_UP(mode_clock,
-					       DP_DSC_MAX_ENC_THROUGHPUT_0);
-	else
-		min_slice_count = DIV_ROUND_UP(mode_clock,
-					       DP_DSC_MAX_ENC_THROUGHPUT_1);
-
-	max_slice_width = drm_dp_dsc_sink_max_slice_width(intel_dp->dsc_dpcd);
-	if (max_slice_width < DP_DSC_MIN_SLICE_WIDTH_VALUE) {
-		DRM_DEBUG_KMS("Unsupported slice width %d by DP DSC Sink device\n",
-			      max_slice_width);
-		return 0;
-	}
-	/* Also take into account max slice width */
-	min_slice_count = min_t(u8, min_slice_count,
-				DIV_ROUND_UP(mode_hdisplay,
-					     max_slice_width));
-
-	/* Find the closest match to the valid slice count values */
-	for (i = 0; i < ARRAY_SIZE(valid_dsc_slicecount); i++) {
-		if (valid_dsc_slicecount[i] >
-		    drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd,
-						    false))
-			break;
-		if (min_slice_count  <= valid_dsc_slicecount[i])
-			return valid_dsc_slicecount[i];
-	}
-
-	DRM_DEBUG_KMS("Unsupported Slice Count %d\n", min_slice_count);
-	return 0;
-}
-
 static void
 intel_pixel_encoding_setup_vsc(struct intel_dp *intel_dp,
 			       const struct intel_crtc_state *crtc_state)
--- a/drivers/gpu/drm/i915/display/intel_dp.h
+++ b/drivers/gpu/drm/i915/display/intel_dp.h
@@ -102,10 +102,6 @@ bool intel_dp_source_supports_hbr2(struc
 bool intel_dp_source_supports_hbr3(struct intel_dp *intel_dp);
 bool
 intel_dp_get_link_status(struct intel_dp *intel_dp, u8 *link_status);
-u16 intel_dp_dsc_get_output_bpp(int link_clock, u8 lane_count,
-				int mode_clock, int mode_hdisplay);
-u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp, int mode_clock,
-				int mode_hdisplay);
 
 bool intel_dp_read_dpcd(struct intel_dp *intel_dp);
 bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp);
@@ -120,4 +116,6 @@ static inline unsigned int intel_dp_unus
 	return ~((1 << lane_count) - 1) & 0xf;
 }
 
+u32 intel_dp_mode_to_fec_clock(u32 mode_clock);
+
 #endif /* __INTEL_DP_H__ */
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -81,7 +81,7 @@ static int intel_dp_mst_compute_link_con
 			       adjusted_mode->crtc_clock,
 			       crtc_state->port_clock,
 			       &crtc_state->dp_m_n,
-			       constant_n);
+			       constant_n, crtc_state->fec_enable);
 	crtc_state->dp_m_n.tu = slots;
 
 	return 0;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 063/148] drm/atomic: Reject FLIP_ASYNC unconditionally
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (60 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 062/148] drm/i915/dp: Fix dsc bpp calculations, v5 Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 064/148] drm/atomic: Take the atomic toys away from X Greg Kroah-Hartman
                   ` (90 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Maarten Lankhorst,
	Nicholas Kazlauskas, Michel Dänzer, Alex Deucher,
	Adam Jackson, Sean Paul, David Airlie, Daniel Vetter

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit f2cbda2dba11de868759cae9c0d2bab5b8411406 upstream.

It's never been wired up. Only userspace that tried to use it (and
didn't actually check whether anything works, but hey it builds) is
the -modesetting atomic implementation. And we just shut that up.

If there's anyone else then we need to silently accept this flag no
matter what, and find a new one. Because once a flag is tainted, it's
lost.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903190642.32588-2-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_atomic_uapi.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -1301,8 +1301,7 @@ int drm_mode_atomic_ioctl(struct drm_dev
 	if (arg->reserved)
 		return -EINVAL;
 
-	if ((arg->flags & DRM_MODE_PAGE_FLIP_ASYNC) &&
-			!dev->mode_config.async_page_flip)
+	if (arg->flags & DRM_MODE_PAGE_FLIP_ASYNC)
 		return -EINVAL;
 
 	/* can't test and expect an event at the same time. */



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 064/148] drm/atomic: Take the atomic toys away from X
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (61 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 063/148] drm/atomic: Reject FLIP_ASYNC unconditionally Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 065/148] drm: mali-dp: Mark expected switch fall-through Greg Kroah-Hartman
                   ` (89 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ilia Mirkin, Maarten Lankhorst,
	Michel Dänzer, Alex Deucher, Adam Jackson, Sean Paul,
	David Airlie, Rob Clark, Daniel Vetter, Nicholas Kazlauskas

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 26b1d3b527e7bf3e24b814d617866ac5199ce68d upstream.

The -modesetting ddx has a totally broken idea of how atomic works:
- doesn't disable old connectors, assuming they get auto-disable like
  with the legacy setcrtc
- assumes ASYNC_FLIP is wired through for the atomic ioctl
- not a single call to TEST_ONLY

Iow the implementation is a 1:1 translation of legacy ioctls to
atomic, which is a) broken b) pointless.

We already have bugs in both i915 and amdgpu-DC where this prevents us
from enabling neat features.

If anyone ever cares about atomic in X we can easily add a new atomic
level (req->value == 2) for X to get back the shiny toys.

Since these broken versions of -modesetting have been shipping,
there's really no other way to get out of this bind.

v2:
- add an informational dmesg output (Rob, Ajax)
- reorder after the DRIVER_ATOMIC check to avoid useless noise (Ilia)
- allow req->value > 2 so that X can do another attempt at atomic in
  the future

v3: Go with paranoid, insist that the X should be first (suggested by
Rob)

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> (v1)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> (v1)
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Adam Jackson <ajax@redhat.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190905185318.31363-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_ioctl.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -336,7 +336,12 @@ drm_setclientcap(struct drm_device *dev,
 	case DRM_CLIENT_CAP_ATOMIC:
 		if (!drm_core_check_feature(dev, DRIVER_ATOMIC))
 			return -EOPNOTSUPP;
-		if (req->value > 1)
+		/* The modesetting DDX has a totally broken idea of atomic. */
+		if (current->comm[0] == 'X' && req->value == 1) {
+			pr_info("broken atomic modeset userspace detected, disabling atomic\n");
+			return -EOPNOTSUPP;
+		}
+		if (req->value > 2)
 			return -EINVAL;
 		file_priv->atomic = req->value;
 		file_priv->universal_planes = req->value;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 065/148] drm: mali-dp: Mark expected switch fall-through
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (62 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 064/148] drm/atomic: Take the atomic toys away from X Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 066/148] drm/omap: fix max fclk divider for omap36xx Greg Kroah-Hartman
                   ` (88 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Liviu Dudau, Anders Roxell, Liviu Dudau

From: Anders Roxell <anders.roxell@linaro.org>

commit 28ba1b1da49a20ba8fb767d6ddd7c521ec79a119 upstream.

Now that -Wimplicit-fallthrough is passed to GCC by default, the
following warnings shows up:

../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_format_get_bpp’:
../drivers/gpu/drm/arm/malidp_hw.c:387:8: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
    bpp = 30;
    ~~~~^~~~
../drivers/gpu/drm/arm/malidp_hw.c:388:3: note: here
   case DRM_FORMAT_YUV420_10BIT:
   ^~~~
../drivers/gpu/drm/arm/malidp_hw.c: In function ‘malidp_se_irq’:
../drivers/gpu/drm/arm/malidp_hw.c:1311:4: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
    drm_writeback_signal_completion(&malidp->mw_connector, 0);
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/gpu/drm/arm/malidp_hw.c:1313:3: note: here
   case MW_START:
   ^~~~

Rework to add a 'break;' in a case that didn't have it so that
the compiler doesn't warn about fall-through.

Cc: stable@vger.kernel.org # v5.2+
Fixes: b8207562abdd ("drm/arm/malidp: Specified the rotation memory requirements for AFBC YUV formats")
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730153056.3606-1-anders.roxell@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/arm/malidp_hw.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/arm/malidp_hw.c
+++ b/drivers/gpu/drm/arm/malidp_hw.c
@@ -385,6 +385,7 @@ int malidp_format_get_bpp(u32 fmt)
 		switch (fmt) {
 		case DRM_FORMAT_VUY101010:
 			bpp = 30;
+			break;
 		case DRM_FORMAT_YUV420_10BIT:
 			bpp = 15;
 			break;
@@ -1309,7 +1310,7 @@ static irqreturn_t malidp_se_irq(int irq
 			break;
 		case MW_RESTART:
 			drm_writeback_signal_completion(&malidp->mw_connector, 0);
-			/* fall through to a new start */
+			/* fall through - to a new start */
 		case MW_START:
 			/* writeback started, need to emulate one-shot mode */
 			hw->disable_memwrite(hwdev);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 066/148] drm/omap: fix max fclk divider for omap36xx
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (63 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 065/148] drm: mali-dp: Mark expected switch fall-through Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 067/148] drm/msm/dsi: Fix return value check for clk_get_parent Greg Kroah-Hartman
                   ` (87 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tomi Valkeinen, Adam Ford, Jyri Sarha

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

commit e2c4ed148cf3ec8669a1d90dc66966028e5fad70 upstream.

The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk
(in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not
correct, and using divider of 32 breaks DSS with a flood or underflows
and sync losts. Dividers up to 31 seem to work fine.

There is another patch to the DT files to limit the divider correctly,
but as the DSS driver also needs to know the maximum divider to be able
to iteratively find good rates, we also need to do the fix in the DSS
driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com
Tested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/omapdrm/dss/dss.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/omapdrm/dss/dss.c
+++ b/drivers/gpu/drm/omapdrm/dss/dss.c
@@ -1090,7 +1090,7 @@ static const struct dss_features omap34x
 
 static const struct dss_features omap3630_dss_feats = {
 	.model			=	DSS_MODEL_OMAP3,
-	.fck_div_max		=	32,
+	.fck_div_max		=	31,
 	.fck_freq_max		=	173000000,
 	.dss_fck_multiplier	=	1,
 	.parent_clk_name	=	"dpll4_ck",



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 067/148] drm/msm/dsi: Fix return value check for clk_get_parent
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (64 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 066/148] drm/omap: fix max fclk divider for omap36xx Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 068/148] drm/nouveau/kms/nv50-: Dont create MSTMs for eDP connectors Greg Kroah-Hartman
                   ` (86 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sibi Sankar, Sean Paul, Rob Clark

From: Sean Paul <seanpaul@chromium.org>

commit 5fb9b797d5ccf311ae4aba69e86080d47668b5f7 upstream.

clk_get_parent returns an error pointer upon failure, not NULL. So the
checks as they exist won't catch a failure. This patch changes the
checks and the return values to properly handle an error pointer.

Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions")
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/msm/dsi/dsi_host.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -421,15 +421,15 @@ static int dsi_clk_init(struct msm_dsi_h
 	}
 
 	msm_host->byte_clk_src = clk_get_parent(msm_host->byte_clk);
-	if (!msm_host->byte_clk_src) {
-		ret = -ENODEV;
+	if (IS_ERR(msm_host->byte_clk_src)) {
+		ret = PTR_ERR(msm_host->byte_clk_src);
 		pr_err("%s: can't find byte_clk clock. ret=%d\n", __func__, ret);
 		goto exit;
 	}
 
 	msm_host->pixel_clk_src = clk_get_parent(msm_host->pixel_clk);
-	if (!msm_host->pixel_clk_src) {
-		ret = -ENODEV;
+	if (IS_ERR(msm_host->pixel_clk_src)) {
+		ret = PTR_ERR(msm_host->pixel_clk_src);
 		pr_err("%s: can't find pixel_clk clock. ret=%d\n", __func__, ret);
 		goto exit;
 	}



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 068/148] drm/nouveau/kms/nv50-: Dont create MSTMs for eDP connectors
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (65 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 067/148] drm/msm/dsi: Fix return value check for clk_get_parent Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 069/148] drm/amd/powerplay: change metrics update period from 1ms to 100ms Greg Kroah-Hartman
                   ` (85 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Lyude Paul, Ben Skeggs

From: Lyude Paul <lyude@redhat.com>

commit 698c1aa9f83b618de79e9e5e19a58f70a4a6ae0f upstream.

On the ThinkPad P71, we have one eDP connector exposed along with 5 DP
connectors, resulting in a total of 11 TMDS encoders. Since the GPU on
this system is also capable of MST, we create an additional 4 fake MST
encoders for each DP port. Unfortunately, we also do this for the eDP
port as well, resulting in:

  1 eDP port: +1 TMDS encoder
              +4 DPMST encoders
  5 DP ports: +2 TMDS encoders
              +4 DPMST encoders
	      *5 ports
	      == 35 encoders

Which breaks things, since DRM has a hard coded limit of 32 encoders.
So, fix this by not creating MSTMs for any eDP connectors. This brings
us down to 31 encoders, although we can do better.

This fixes driver probing for nouveau on the ThinkPad P71.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/dispnv50/disp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/nouveau/dispnv50/disp.c
+++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c
@@ -1603,7 +1603,8 @@ nv50_sor_create(struct drm_connector *co
 			nv_encoder->aux = aux;
 		}
 
-		if ((data = nvbios_dp_table(bios, &ver, &hdr, &cnt, &len)) &&
+		if (nv_connector->type != DCB_CONNECTOR_eDP &&
+		    (data = nvbios_dp_table(bios, &ver, &hdr, &cnt, &len)) &&
 		    ver >= 0x40 && (nvbios_rd08(bios, data + 0x08) & 0x04)) {
 			ret = nv50_mstm_new(nv_encoder, &nv_connector->aux, 16,
 					    nv_connector->base.base.id,



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 069/148] drm/amd/powerplay: change metrics update period from 1ms to 100ms
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (66 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 068/148] drm/nouveau/kms/nv50-: Dont create MSTMs for eDP connectors Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 070/148] drm/i915/gvt: update vgpu workload head pointer correctly Greg Kroah-Hartman
                   ` (84 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kevin Wang, Kenneth Feng, Alex Deucher

From: Kevin Wang <kevin1.wang@amd.com>

commit e0e4a2ce7a059d051c66cd7c94314fef3cd91aea upstream.

v2:
change period from 10ms to 100ms (typo error)

too high frequence to update mertrics table will cause smu firmware
error,so change mertrics table update period from 1ms to 100ms
(navi10, 12, 14)

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.3.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/powerplay/navi10_ppt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c
@@ -532,7 +532,7 @@ static int navi10_get_metrics_table(stru
 	struct smu_table_context *smu_table= &smu->smu_table;
 	int ret = 0;
 
-	if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + HZ / 1000)) {
+	if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + msecs_to_jiffies(100))) {
 		ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0,
 				(void *)smu_table->metrics_table, false);
 		if (ret) {



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 070/148] drm/i915/gvt: update vgpu workload head pointer correctly
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (67 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 069/148] drm/amd/powerplay: change metrics update period from 1ms to 100ms Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 071/148] drm/i915/userptr: Acquire the page lock around set_page_dirty() Greg Kroah-Hartman
                   ` (83 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Xiaolin Zhang, Zhenyu Wang

From: Xiaolin Zhang <xiaolin.zhang@intel.com>

commit 0a3242bdb47713e09cb004a0ba4947d3edf82d8a upstream.

when creating a vGPU workload, the guest context head pointer should
be updated correctly by comparing with the exsiting workload in the
guest worklod queue including the current running context.

in some situation, there is a running context A and then received 2 new
vGPU workload context B and A. in the new workload context A, it's head
pointer should be updated with the running context A's tail.

v2: walk through guest workload list in backward way.

Cc: stable@vger.kernel.org
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/gvt/scheduler.c |   28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

--- a/drivers/gpu/drm/i915/gvt/scheduler.c
+++ b/drivers/gpu/drm/i915/gvt/scheduler.c
@@ -1424,9 +1424,6 @@ static int prepare_mm(struct intel_vgpu_
 #define same_context(a, b) (((a)->context_id == (b)->context_id) && \
 		((a)->lrca == (b)->lrca))
 
-#define get_last_workload(q) \
-	(list_empty(q) ? NULL : container_of(q->prev, \
-	struct intel_vgpu_workload, list))
 /**
  * intel_vgpu_create_workload - create a vGPU workload
  * @vgpu: a vGPU
@@ -1446,7 +1443,7 @@ intel_vgpu_create_workload(struct intel_
 {
 	struct intel_vgpu_submission *s = &vgpu->submission;
 	struct list_head *q = workload_q_head(vgpu, ring_id);
-	struct intel_vgpu_workload *last_workload = get_last_workload(q);
+	struct intel_vgpu_workload *last_workload = NULL;
 	struct intel_vgpu_workload *workload = NULL;
 	struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv;
 	u64 ring_context_gpa;
@@ -1472,15 +1469,20 @@ intel_vgpu_create_workload(struct intel_
 	head &= RB_HEAD_OFF_MASK;
 	tail &= RB_TAIL_OFF_MASK;
 
-	if (last_workload && same_context(&last_workload->ctx_desc, desc)) {
-		gvt_dbg_el("ring id %d cur workload == last\n", ring_id);
-		gvt_dbg_el("ctx head %x real head %lx\n", head,
-				last_workload->rb_tail);
-		/*
-		 * cannot use guest context head pointer here,
-		 * as it might not be updated at this time
-		 */
-		head = last_workload->rb_tail;
+	list_for_each_entry_reverse(last_workload, q, list) {
+
+		if (same_context(&last_workload->ctx_desc, desc)) {
+			gvt_dbg_el("ring id %d cur workload == last\n",
+					ring_id);
+			gvt_dbg_el("ctx head %x real head %lx\n", head,
+					last_workload->rb_tail);
+			/*
+			 * cannot use guest context head pointer here,
+			 * as it might not be updated at this time
+			 */
+			head = last_workload->rb_tail;
+			break;
+		}
 	}
 
 	gvt_dbg_el("ring id %d begin a new workload\n", ring_id);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 071/148] drm/i915/userptr: Acquire the page lock around set_page_dirty()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (68 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 070/148] drm/i915/gvt: update vgpu workload head pointer correctly Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 072/148] drm/i915: to make vgpu ppgtt notificaiton as atomic operation Greg Kroah-Hartman
                   ` (82 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chris Wilson, Tvrtko Ursulin

From: Chris Wilson <chris@chris-wilson.co.uk>

commit cb6d7c7dc7ff8cace666ddec66334117a6068ce2 upstream.

set_page_dirty says:

	For pages with a mapping this should be done under the page lock
	for the benefit of asynchronous memory errors who prefer a
	consistent dirty state. This rule can be broken in some special
	cases, but should be better not to.

Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190708140327.26825-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/gem/i915_gem_userptr.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/gem/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/gem/i915_gem_userptr.c
@@ -664,7 +664,15 @@ i915_gem_userptr_put_pages(struct drm_i9
 
 	for_each_sgt_page(page, sgt_iter, pages) {
 		if (obj->mm.dirty)
-			set_page_dirty(page);
+			/*
+			 * As this may not be anonymous memory (e.g. shmem)
+			 * but exist on a real mapping, we have to lock
+			 * the page in order to dirty it -- holding
+			 * the page reference is not sufficient to
+			 * prevent the inode from being truncated.
+			 * Play safe and take the lock.
+			 */
+			set_page_dirty_lock(page);
 
 		mark_page_accessed(page);
 		put_page(page);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 072/148] drm/i915: to make vgpu ppgtt notificaiton as atomic operation
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (69 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 071/148] drm/i915/userptr: Acquire the page lock around set_page_dirty() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 073/148] mac80211: keep BHs disabled while calling drv_tx_wake_queue() Greg Kroah-Hartman
                   ` (81 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Xiaolin Zhang, Chris Wilson, Rodrigo Vivi

From: Xiaolin Zhang <xiaolin.zhang@intel.com>

commit 9e77f5001b9833a6bdd3940df245053c2212a32b upstream.

vgpu ppgtt notification was split into 2 steps, the first step is to
update PVINFO's pdp register and then write PVINFO's g2v_notify register
with action code to tirgger ppgtt notification to GVT side.

currently these steps were not atomic operations due to no any protection,
so it is easy to enter race condition state during the MTBF, stress and
IGT test to cause GPU hang.

the solution is to add a lock to make vgpu ppgtt notication as atomic
operation.

Cc: stable@vger.kernel.org
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1566543451-13955-1-git-send-email-xiaolin.zhang@intel.com
(cherry picked from commit 52988009843160c5b366b4082ed6df48041c655c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_drv.h     |    1 +
 drivers/gpu/drm/i915/i915_gem_gtt.c |   12 +++++++-----
 drivers/gpu/drm/i915/i915_vgpu.c    |    1 +
 3 files changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1073,6 +1073,7 @@ struct i915_frontbuffer_tracking {
 };
 
 struct i915_virtual_gpu {
+	struct mutex lock; /* serialises sending of g2v_notify command pkts */
 	bool active;
 	u32 caps;
 };
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -1248,14 +1248,15 @@ free_scratch_page:
 	return ret;
 }
 
-static int gen8_ppgtt_notify_vgt(struct i915_ppgtt *ppgtt, bool create)
+static void gen8_ppgtt_notify_vgt(struct i915_ppgtt *ppgtt, bool create)
 {
-	struct i915_address_space *vm = &ppgtt->vm;
-	struct drm_i915_private *dev_priv = vm->i915;
+	struct drm_i915_private *dev_priv = ppgtt->vm.i915;
 	enum vgt_g2v_type msg;
 	int i;
 
-	if (i915_vm_is_4lvl(vm)) {
+	mutex_lock(&dev_priv->vgpu.lock);
+
+	if (i915_vm_is_4lvl(&ppgtt->vm)) {
 		const u64 daddr = px_dma(ppgtt->pd);
 
 		I915_WRITE(vgtif_reg(pdp[0].lo), lower_32_bits(daddr));
@@ -1275,9 +1276,10 @@ static int gen8_ppgtt_notify_vgt(struct
 				VGT_G2V_PPGTT_L3_PAGE_TABLE_DESTROY);
 	}
 
+	/* g2v_notify atomically (via hv trap) consumes the message packet. */
 	I915_WRITE(vgtif_reg(g2v_notify), msg);
 
-	return 0;
+	mutex_unlock(&dev_priv->vgpu.lock);
 }
 
 static void gen8_free_scratch(struct i915_address_space *vm)
--- a/drivers/gpu/drm/i915/i915_vgpu.c
+++ b/drivers/gpu/drm/i915/i915_vgpu.c
@@ -79,6 +79,7 @@ void i915_check_vgpu(struct drm_i915_pri
 	dev_priv->vgpu.caps = __raw_uncore_read32(uncore, vgtif_reg(vgt_caps));
 
 	dev_priv->vgpu.active = true;
+	mutex_init(&dev_priv->vgpu.lock);
 	DRM_INFO("Virtual GPU for Intel GVT-g detected.\n");
 }
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 073/148] mac80211: keep BHs disabled while calling drv_tx_wake_queue()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (70 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 072/148] drm/i915: to make vgpu ppgtt notificaiton as atomic operation Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 074/148] mmc: tegra: Implement ->set_dma_mask() Greg Kroah-Hartman
                   ` (80 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aaron Hill, Lukas Redlinger,
	Oleksii Shevchuk, Toke Høiland-Jørgensen,
	Johannes Berg, Jiri Kosina

From: Johannes Berg <johannes.berg@intel.com>

commit d8dec42b5c2d2b273bc30b0e073cfbe832d69902 upstream.

Drivers typically expect this, as it's the case for almost all cases
where this is called (i.e. from the TX path). Also, the code in mac80211
itself (if the driver calls ieee80211_tx_dequeue()) expects this as it
uses this_cpu_ptr() without additional protection.

This should fix various reports of the problem:
https://bugzilla.kernel.org/show_bug.cgi?id=204127
https://lore.kernel.org/linux-wireless/CAN5HydrWb3o_FE6A1XDnP1E+xS66d5kiEuhHfiGKkLNQokx13Q@mail.gmail.com/
https://lore.kernel.org/lkml/nycvar.YFH.7.76.1909111238470.473@cbobk.fhfr.pm/

Cc: stable@vger.kernel.org
Reported-and-tested-by: Jiri Kosina <jkosina@suse.cz>
Reported-by: Aaron Hill <aa1ronham@gmail.com>
Reported-by: Lukas Redlinger <rel+kernel@agilox.net>
Reported-by: Oleksii Shevchuk <alxchk@gmail.com>
Fixes: 21a5d4c3a45c ("mac80211: add stop/start logic for software TXQs")
Link: https://lore.kernel.org/r/1569928763-I3e8838c5ecad878e59d4a94eb069a90f6641461a@changeid
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac80211/util.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -247,7 +247,8 @@ static void __ieee80211_wake_txqs(struct
 	struct sta_info *sta;
 	int i;
 
-	spin_lock_bh(&fq->lock);
+	local_bh_disable();
+	spin_lock(&fq->lock);
 
 	if (sdata->vif.type == NL80211_IFTYPE_AP)
 		ps = &sdata->bss->ps;
@@ -273,9 +274,9 @@ static void __ieee80211_wake_txqs(struct
 						&txqi->flags))
 				continue;
 
-			spin_unlock_bh(&fq->lock);
+			spin_unlock(&fq->lock);
 			drv_wake_tx_queue(local, txqi);
-			spin_lock_bh(&fq->lock);
+			spin_lock(&fq->lock);
 		}
 	}
 
@@ -288,12 +289,14 @@ static void __ieee80211_wake_txqs(struct
 	    (ps && atomic_read(&ps->num_sta_ps)) || ac != vif->txq->ac)
 		goto out;
 
-	spin_unlock_bh(&fq->lock);
+	spin_unlock(&fq->lock);
 
 	drv_wake_tx_queue(local, txqi);
+	local_bh_enable();
 	return;
 out:
-	spin_unlock_bh(&fq->lock);
+	spin_unlock(&fq->lock);
+	local_bh_enable();
 }
 
 static void



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 074/148] mmc: tegra: Implement ->set_dma_mask()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (71 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 073/148] mac80211: keep BHs disabled while calling drv_tx_wake_queue() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 075/148] mmc: sdhci: improve ADMA error reporting Greg Kroah-Hartman
                   ` (79 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nicolin Chen, Adrian Hunter,
	Thierry Reding, Ulf Hansson

From: Nicolin Chen <nicoleotsuka@gmail.com>

commit b960bc448a252428bacca271f3416a8bda3b599b upstream.

The SDHCI controller on Tegra186 supports 40-bit addressing, which is
usually enough to address all of system memory. However, if the SDHCI
controller is behind an IOMMU, the address space can go beyond. This
happens on Tegra186 and later where the ARM SMMU has an input address
space of 48 bits. If the DMA API is backed by this ARM SMMU, the top-
down IOVA allocator will cause IOV addresses to be returned that the
SDHCI controller cannot access.

Unfortunately, prior to the introduction of the ->set_dma_mask() host
operation, the SDHCI core would set either a 64-bit DMA mask if the
controller claimed to support 64-bit addressing, or a 32-bit DMA mask
otherwise.

Since the full 64 bits cannot be addressed on Tegra, this had to be
worked around in commit 68481a7e1c84 ("mmc: tegra: Mark 64 bit dma
broken on Tegra186") by setting the SDHCI_QUIRK2_BROKEN_64_BIT_DMA
quirk, which effectively restricts the DMA mask to 32 bits.

One disadvantage of this is that dma_map_*() APIs will now try to use
the swiotlb to bounce DMA to addresses beyond of the controller's DMA
mask. This in turn caused degraded performance and can lead to
situations where the swiotlb buffer is exhausted, which in turn leads
to DMA transfers to fail.

With the recent introduction of the ->set_dma_mask() host operation,
this can now be properly fixed. For each generation of Tegra, the exact
supported DMA mask can be configured. This kills two birds with one
stone: it avoids the use of bounce buffers because system memory never
exceeds the addressable memory range of the SDHCI controllers on these
devices, and at the same time when an IOMMU is involved, it prevents
IOV addresses from being allocated beyond the addressible range of the
controllers.

Since the DMA mask is now properly handled, the 64-bit DMA quirk can be
removed.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
[treding@nvidia.com: provide more background in commit message]
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-tegra.c |   48 +++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 20 deletions(-)

--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -4,6 +4,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -104,6 +105,7 @@
 
 struct sdhci_tegra_soc_data {
 	const struct sdhci_pltfm_data *pdata;
+	u64 dma_mask;
 	u32 nvquirks;
 	u8 min_tap_delay;
 	u8 max_tap_delay;
@@ -1233,11 +1235,25 @@ static const struct cqhci_host_ops sdhci
 	.update_dcmd_desc = sdhci_tegra_update_dcmd_desc,
 };
 
+static int tegra_sdhci_set_dma_mask(struct sdhci_host *host)
+{
+	struct sdhci_pltfm_host *platform = sdhci_priv(host);
+	struct sdhci_tegra *tegra = sdhci_pltfm_priv(platform);
+	const struct sdhci_tegra_soc_data *soc = tegra->soc_data;
+	struct device *dev = mmc_dev(host->mmc);
+
+	if (soc->dma_mask)
+		return dma_set_mask_and_coherent(dev, soc->dma_mask);
+
+	return 0;
+}
+
 static const struct sdhci_ops tegra_sdhci_ops = {
 	.get_ro     = tegra_sdhci_get_ro,
 	.read_w     = tegra_sdhci_readw,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_dma_mask = tegra_sdhci_set_dma_mask,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.platform_execute_tuning = tegra_sdhci_execute_tuning,
@@ -1257,6 +1273,7 @@ static const struct sdhci_pltfm_data sdh
 
 static const struct sdhci_tegra_soc_data soc_data_tegra20 = {
 	.pdata = &sdhci_tegra20_pdata,
+	.dma_mask = DMA_BIT_MASK(32),
 	.nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 |
 		    NVQUIRK_ENABLE_BLOCK_GAP_DET,
 };
@@ -1283,6 +1300,7 @@ static const struct sdhci_pltfm_data sdh
 
 static const struct sdhci_tegra_soc_data soc_data_tegra30 = {
 	.pdata = &sdhci_tegra30_pdata,
+	.dma_mask = DMA_BIT_MASK(32),
 	.nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 |
 		    NVQUIRK_ENABLE_SDR50 |
 		    NVQUIRK_ENABLE_SDR104 |
@@ -1295,6 +1313,7 @@ static const struct sdhci_ops tegra114_s
 	.write_w    = tegra_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_dma_mask = tegra_sdhci_set_dma_mask,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.platform_execute_tuning = tegra_sdhci_execute_tuning,
@@ -1316,6 +1335,7 @@ static const struct sdhci_pltfm_data sdh
 
 static const struct sdhci_tegra_soc_data soc_data_tegra114 = {
 	.pdata = &sdhci_tegra114_pdata,
+	.dma_mask = DMA_BIT_MASK(32),
 };
 
 static const struct sdhci_pltfm_data sdhci_tegra124_pdata = {
@@ -1325,22 +1345,13 @@ static const struct sdhci_pltfm_data sdh
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-		   /*
-		    * The TRM states that the SD/MMC controller found on
-		    * Tegra124 can address 34 bits (the maximum supported by
-		    * the Tegra memory controller), but tests show that DMA
-		    * to or from above 4 GiB doesn't work. This is possibly
-		    * caused by missing programming, though it's not obvious
-		    * what sequence is required. Mark 64-bit DMA broken for
-		    * now to fix this for existing users (e.g. Nyan boards).
-		    */
-		   SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops  = &tegra114_sdhci_ops,
 };
 
 static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
 	.pdata = &sdhci_tegra124_pdata,
+	.dma_mask = DMA_BIT_MASK(34),
 };
 
 static const struct sdhci_ops tegra210_sdhci_ops = {
@@ -1349,6 +1360,7 @@ static const struct sdhci_ops tegra210_s
 	.write_w    = tegra210_sdhci_writew,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_dma_mask = tegra_sdhci_set_dma_mask,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
@@ -1369,6 +1381,7 @@ static const struct sdhci_pltfm_data sdh
 
 static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
 	.pdata = &sdhci_tegra210_pdata,
+	.dma_mask = DMA_BIT_MASK(34),
 	.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
 		    NVQUIRK_HAS_PADCALIB |
 		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
@@ -1383,6 +1396,7 @@ static const struct sdhci_ops tegra186_s
 	.read_w     = tegra_sdhci_readw,
 	.write_l    = tegra_sdhci_writel,
 	.set_clock  = tegra_sdhci_set_clock,
+	.set_dma_mask = tegra_sdhci_set_dma_mask,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset      = tegra_sdhci_reset,
 	.set_uhs_signaling = tegra_sdhci_set_uhs_signaling,
@@ -1398,20 +1412,13 @@ static const struct sdhci_pltfm_data sdh
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-		   /* SDHCI controllers on Tegra186 support 40-bit addressing.
-		    * IOVA addresses are 48-bit wide on Tegra186.
-		    * With 64-bit dma mask used for SDHCI, accesses can
-		    * be broken. Disable 64-bit dma, which would fall back
-		    * to 32-bit dma mask. Ideally 40-bit dma mask would work,
-		    * But it is not supported as of now.
-		    */
-		   SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops  = &tegra186_sdhci_ops,
 };
 
 static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
 	.pdata = &sdhci_tegra186_pdata,
+	.dma_mask = DMA_BIT_MASK(40),
 	.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
 		    NVQUIRK_HAS_PADCALIB |
 		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
@@ -1424,6 +1431,7 @@ static const struct sdhci_tegra_soc_data
 
 static const struct sdhci_tegra_soc_data soc_data_tegra194 = {
 	.pdata = &sdhci_tegra186_pdata,
+	.dma_mask = DMA_BIT_MASK(39),
 	.nvquirks = NVQUIRK_NEEDS_PAD_CONTROL |
 		    NVQUIRK_HAS_PADCALIB |
 		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 075/148] mmc: sdhci: improve ADMA error reporting
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (72 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 074/148] mmc: tegra: Implement ->set_dma_mask() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence Greg Kroah-Hartman
                   ` (78 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Russell King, Adrian Hunter, Ulf Hansson

From: Russell King <rmk+kernel@armlinux.org.uk>

commit d1c536e3177390da43d99f20143b810c35433d1f upstream.

ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.

Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().

We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service.  What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered.  Fix that too.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci.c |   15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2857,6 +2857,7 @@ static void sdhci_cmd_irq(struct sdhci_h
 static void sdhci_adma_show_error(struct sdhci_host *host)
 {
 	void *desc = host->adma_table;
+	dma_addr_t dma = host->adma_addr;
 
 	sdhci_dumpregs(host);
 
@@ -2864,18 +2865,21 @@ static void sdhci_adma_show_error(struct
 		struct sdhci_adma2_64_desc *dma_desc = desc;
 
 		if (host->flags & SDHCI_USE_64_BIT_DMA)
-			DBG("%p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
-			    desc, le32_to_cpu(dma_desc->addr_hi),
+			SDHCI_DUMP("%08llx: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+			    (unsigned long long)dma,
+			    le32_to_cpu(dma_desc->addr_hi),
 			    le32_to_cpu(dma_desc->addr_lo),
 			    le16_to_cpu(dma_desc->len),
 			    le16_to_cpu(dma_desc->cmd));
 		else
-			DBG("%p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
-			    desc, le32_to_cpu(dma_desc->addr_lo),
+			SDHCI_DUMP("%08llx: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+			    (unsigned long long)dma,
+			    le32_to_cpu(dma_desc->addr_lo),
 			    le16_to_cpu(dma_desc->len),
 			    le16_to_cpu(dma_desc->cmd));
 
 		desc += host->desc_sz;
+		dma += host->desc_sz;
 
 		if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
 			break;
@@ -2951,7 +2955,8 @@ static void sdhci_data_irq(struct sdhci_
 			!= MMC_BUS_TEST_R)
 		host->data->error = -EILSEQ;
 	else if (intmask & SDHCI_INT_ADMA_ERROR) {
-		pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
+		pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
+		       intmask);
 		sdhci_adma_show_error(host);
 		host->data->error = -EIO;
 		if (host->ops->adma_workaround)



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (73 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 075/148] mmc: sdhci: improve ADMA error reporting Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:49   ` Russell King - ARM Linux admin
  2019-10-10  8:35 ` [PATCH 5.3 077/148] mmc: sdhci: Let drivers define their DMA mask Greg Kroah-Hartman
                   ` (77 subsequent siblings)
  152 siblings, 1 reply; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Russell King, Adrian Hunter, Ulf Hansson

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 121bd08b029e03404c451bb237729cdff76eafed upstream.

We must not unconditionally set the DMA snoop bit; if the DMA API is
assuming that the device is not DMA coherent, and the device snoops the
CPU caches, the device can see stale cache lines brought in by
speculative prefetch.

This leads to the device seeing stale data, potentially resulting in
corrupted data transfers.  Commonly, this results in a descriptor fetch
error such as:

mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card

but can lead to other errors, and potentially direct the SDHCI
controller to read/write data to other memory locations (e.g. if a valid
descriptor is visible to the device in a stale cache line.)

Fix this by ensuring that the DMA snoop bit corresponds with the
behaviour of the DMA API.  Since the driver currently only supports DT,
use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
used as that risks re-introducing this bug if/when the driver is
converted to ACPI.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-of-esdhc.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -495,7 +495,12 @@ static int esdhc_of_enable_dma(struct sd
 		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
 
 	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
-	value |= ESDHC_DMA_SNOOP;
+
+	if (of_dma_is_coherent(dev->of_node))
+		value |= ESDHC_DMA_SNOOP;
+	else
+		value &= ~ESDHC_DMA_SNOOP;
+
 	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
 	return 0;
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 077/148] mmc: sdhci: Let drivers define their DMA mask
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (74 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 078/148] Revert "locking/pvqspinlock: Dont wait if vCPU is preempted" Greg Kroah-Hartman
                   ` (76 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Adrian Hunter, Nicolin Chen,
	Thierry Reding, Ulf Hansson

From: Adrian Hunter <adrian.hunter@intel.com>

commit 4ee7dde4c777f14cb0f98dd201491bf6cc15899b upstream.

Add host operation ->set_dma_mask() so that drivers can define their own
DMA masks.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org # v4.15 +
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci.c |   12 ++++--------
 drivers/mmc/host/sdhci.h |    1 +
 2 files changed, 5 insertions(+), 8 deletions(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -3763,18 +3763,14 @@ int sdhci_setup_host(struct sdhci_host *
 		host->flags &= ~SDHCI_USE_ADMA;
 	}
 
-	/*
-	 * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
-	 * and *must* do 64-bit DMA.  A driver has the opportunity to change
-	 * that during the first call to ->enable_dma().  Similarly
-	 * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
-	 * implement.
-	 */
 	if (sdhci_can_64bit_dma(host))
 		host->flags |= SDHCI_USE_64_BIT_DMA;
 
 	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
-		ret = sdhci_set_dma_mask(host);
+		if (host->ops->set_dma_mask)
+			ret = host->ops->set_dma_mask(host);
+		else
+			ret = sdhci_set_dma_mask(host);
 
 		if (!ret && host->ops->enable_dma)
 			ret = host->ops->enable_dma(host);
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -622,6 +622,7 @@ struct sdhci_ops {
 
 	u32		(*irq)(struct sdhci_host *host, u32 intmask);
 
+	int		(*set_dma_mask)(struct sdhci_host *host);
 	int		(*enable_dma)(struct sdhci_host *host);
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 078/148] Revert "locking/pvqspinlock: Dont wait if vCPU is preempted"
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (75 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 077/148] mmc: sdhci: Let drivers define their DMA mask Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 079/148] libnvdimm/altmap: Track namespace boundaries in altmap Greg Kroah-Hartman
                   ` (75 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, loobinliu, Peter Zijlstra,
	Thomas Gleixner, Ingo Molnar, Waiman Long, Paolo Bonzini,
	Radim Krčmář,
	Wanpeng Li

From: Wanpeng Li <wanpengli@tencent.com>

commit 89340d0935c9296c7b8222b6eab30e67cb57ab82 upstream.

This patch reverts commit 75437bb304b20 (locking/pvqspinlock: Don't
wait if vCPU is preempted).  A large performance regression was caused
by this commit.  on over-subscription scenarios.

The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads,
with three VMs of 80 vCPUs each.  The score of ebizzy -M is reduced from
13000-14000 records/s to 1700-1800 records/s:

          Host                Guest                score

vanilla w/o kvm optimizations     upstream    1700-1800 records/s
vanilla w/o kvm optimizations     revert      13000-14000 records/s
vanilla w/ kvm optimizations      upstream    4500-5000 records/s
vanilla w/ kvm optimizations      revert      14000-15500 records/s

Exit from aggressive wait-early mechanism can result in premature yield
and extra scheduling latency.

Actually, only 6% of wait_early events are caused by vcpu_is_preempted()
being true.  However, when one vCPU voluntarily releases its vCPU, all
the subsequently waiters in the queue will do the same and the cascading
effect leads to bad performance.

kvm optimizations:
[1] commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts)
[2] commit 266e85a5ec9 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption)

Tested-by: loobinliu@tencent.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: loobinliu@tencent.com
Cc: stable@vger.kernel.org
Fixes: 75437bb304b20 (locking/pvqspinlock: Don't wait if vCPU is preempted)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/locking/qspinlock_paravirt.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/locking/qspinlock_paravirt.h
+++ b/kernel/locking/qspinlock_paravirt.h
@@ -269,7 +269,7 @@ pv_wait_early(struct pv_node *prev, int
 	if ((loop & PV_PREV_CHECK_MASK) != 0)
 		return false;
 
-	return READ_ONCE(prev->state) != vcpu_running || vcpu_is_preempted(prev->cpu);
+	return READ_ONCE(prev->state) != vcpu_running;
 }
 
 /*



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 079/148] libnvdimm/altmap: Track namespace boundaries in altmap
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (76 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 078/148] Revert "locking/pvqspinlock: Dont wait if vCPU is preempted" Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 080/148] sched: Add __ASSEMBLY__ guards around struct clone_args Greg Kroah-Hartman
                   ` (74 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sachin Sant, Aneesh Kumar K.V,
	Pankaj Gupta, Santosh Sivaraj, Johannes Thumshirn, Dan Williams

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit cf387d9644d8c78721cf9b77af9f67bb5b04da16 upstream.

With PFN_MODE_PMEM namespace, the memmap area is allocated from the device
area. Some architectures map the memmap area with large page size. On
architectures like ppc64, 16MB page for memap mapping can map 262144 pfns.
This maps a namespace size of 16G.

When populating memmap region with 16MB page from the device area,
make sure the allocated space is not used to map resources outside this
namespace. Such usage of device area will prevent a namespace destroy.

Add resource end pnf in altmap and use that to check if the memmap area
allocation can map pfn outside the namespace. On ppc64 in such case we fallback
to allocation from memory.

This fix kernel crash reported below:

[  132.034989] WARNING: CPU: 13 PID: 13719 at mm/memremap.c:133 devm_memremap_pages_release+0x2d8/0x2e0
[  133.464754] BUG: Unable to handle kernel data access at 0xc00c00010b204000
[  133.464760] Faulting instruction address: 0xc00000000007580c
[  133.464766] Oops: Kernel access of bad area, sig: 11 [#1]
[  133.464771] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
.....
[  133.464901] NIP [c00000000007580c] vmemmap_free+0x2ac/0x3d0
[  133.464906] LR [c0000000000757f8] vmemmap_free+0x298/0x3d0
[  133.464910] Call Trace:
[  133.464914] [c000007cbfd0f7b0] [c0000000000757f8] vmemmap_free+0x298/0x3d0 (unreliable)
[  133.464921] [c000007cbfd0f8d0] [c000000000370a44] section_deactivate+0x1a4/0x240
[  133.464928] [c000007cbfd0f980] [c000000000386270] __remove_pages+0x3a0/0x590
[  133.464935] [c000007cbfd0fa50] [c000000000074158] arch_remove_memory+0x88/0x160
[  133.464942] [c000007cbfd0fae0] [c0000000003be8c0] devm_memremap_pages_release+0x150/0x2e0
[  133.464949] [c000007cbfd0fb70] [c000000000738ea0] devm_action_release+0x30/0x50
[  133.464955] [c000007cbfd0fb90] [c00000000073a5a4] release_nodes+0x344/0x400
[  133.464961] [c000007cbfd0fc40] [c00000000073378c] device_release_driver_internal+0x15c/0x250
[  133.464968] [c000007cbfd0fc80] [c00000000072fd14] unbind_store+0x104/0x110
[  133.464973] [c000007cbfd0fcd0] [c00000000072ee24] drv_attr_store+0x44/0x70
[  133.464981] [c000007cbfd0fcf0] [c0000000004a32bc] sysfs_kf_write+0x6c/0xa0
[  133.464987] [c000007cbfd0fd10] [c0000000004a1dfc] kernfs_fop_write+0x17c/0x250
[  133.464993] [c000007cbfd0fd60] [c0000000003c348c] __vfs_write+0x3c/0x70
[  133.464999] [c000007cbfd0fd80] [c0000000003c75d0] vfs_write+0xd0/0x250

djbw: Aneesh notes that this crash can likely be triggered in any kernel that
supports 'papr_scm', so flagging that commit for -stable consideration.

Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions")
Cc: <stable@vger.kernel.org>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Pankaj Gupta <pagupta@redhat.com>
Tested-by: Santosh Sivaraj <santosh@fossix.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Link: https://lore.kernel.org/r/20190910062826.10041-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/init_64.c |   17 ++++++++++++++++-
 drivers/nvdimm/pfn_devs.c |    2 ++
 include/linux/memremap.h  |    1 +
 3 files changed, 19 insertions(+), 1 deletion(-)

--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -172,6 +172,21 @@ static __meminit void vmemmap_list_popul
 	vmemmap_list = vmem_back;
 }
 
+static bool altmap_cross_boundary(struct vmem_altmap *altmap, unsigned long start,
+				unsigned long page_size)
+{
+	unsigned long nr_pfn = page_size / sizeof(struct page);
+	unsigned long start_pfn = page_to_pfn((struct page *)start);
+
+	if ((start_pfn + nr_pfn) > altmap->end_pfn)
+		return true;
+
+	if (start_pfn < altmap->base_pfn)
+		return true;
+
+	return false;
+}
+
 int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
 		struct vmem_altmap *altmap)
 {
@@ -194,7 +209,7 @@ int __meminit vmemmap_populate(unsigned
 		 * fail due to alignment issues when using 16MB hugepages, so
 		 * fall back to system memory if the altmap allocation fail.
 		 */
-		if (altmap) {
+		if (altmap && !altmap_cross_boundary(altmap, start, page_size)) {
 			p = altmap_alloc_block_buf(page_size, altmap);
 			if (!p)
 				pr_debug("altmap block allocation failed, falling back to system memory");
--- a/drivers/nvdimm/pfn_devs.c
+++ b/drivers/nvdimm/pfn_devs.c
@@ -618,9 +618,11 @@ static int __nvdimm_setup_pfn(struct nd_
 	struct nd_namespace_common *ndns = nd_pfn->ndns;
 	struct nd_namespace_io *nsio = to_nd_namespace_io(&ndns->dev);
 	resource_size_t base = nsio->res.start + start_pad;
+	resource_size_t end = nsio->res.end - end_trunc;
 	struct vmem_altmap __altmap = {
 		.base_pfn = init_altmap_base(base),
 		.reserve = init_altmap_reserve(base),
+		.end_pfn = PHYS_PFN(end),
 	};
 
 	memcpy(res, &nsio->res, sizeof(*res));
--- a/include/linux/memremap.h
+++ b/include/linux/memremap.h
@@ -17,6 +17,7 @@ struct device;
  */
 struct vmem_altmap {
 	const unsigned long base_pfn;
+	const unsigned long end_pfn;
 	const unsigned long reserve;
 	unsigned long free;
 	unsigned long align;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 080/148] sched: Add __ASSEMBLY__ guards around struct clone_args
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (77 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 079/148] libnvdimm/altmap: Track namespace boundaries in altmap Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 081/148] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again Greg Kroah-Hartman
                   ` (73 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Seth Forshee, Ingo Molnar, Christian Brauner

From: Seth Forshee <seth.forshee@canonical.com>

commit 61129dd29f7962f278b618a2a3e8fdb986a66dc8 upstream.

The addition of struct clone_args to uapi/linux/sched.h is not protected
by __ASSEMBLY__ guards, causing a failure to build from source for glibc
on RISC-V. Add the guards to fix this.

Fixes: 7f192e3cd316 ("fork: add clone3")
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Cc: <stable@vger.kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20190917071853.12385-1-seth.forshee@canonical.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/sched.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/include/uapi/linux/sched.h
+++ b/include/uapi/linux/sched.h
@@ -33,6 +33,7 @@
 #define CLONE_NEWNET		0x40000000	/* New network namespace */
 #define CLONE_IO		0x80000000	/* Clone io context */
 
+#ifndef __ASSEMBLY__
 /*
  * Arguments for the clone3 syscall
  */
@@ -46,6 +47,7 @@ struct clone_args {
 	__aligned_u64 stack_size;
 	__aligned_u64 tls;
 };
+#endif
 
 /*
  * Scheduling policies



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 081/148] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (78 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 080/148] sched: Add __ASSEMBLY__ guards around struct clone_args Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 082/148] xen/balloon: Set pages PageOffline() in balloon_add_region() Greg Kroah-Hartman
                   ` (72 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, H. Nikolaus Schaller, Tony Lindgren

From: H. Nikolaus Schaller <hns@goldelico.com>

commit f1f028ff89cb0d37db299d48e7b2ce19be040d52 upstream.

commit 6953c57ab172 "gpio: of: Handle SPI chipselect legacy bindings"

did introduce logic to centrally handle the legacy spi-cs-high property
in combination with cs-gpios. This assumes that the polarity
of the CS has to be inverted if spi-cs-high is missing, even
and especially if non-legacy GPIO_ACTIVE_HIGH is specified.

The DTS for the GTA04 was orginally introduced under the assumption
that there is no need for spi-cs-high if the gpio is defined with
proper polarity GPIO_ACTIVE_HIGH.

This was not a problem until gpiolib changed the interpretation of
GPIO_ACTIVE_HIGH and missing spi-cs-high.

The effect is that the missing spi-cs-high is now interpreted as CS being
low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the
panel is to be programmed by the panel driver.

Therefore, we have to add the redundant and legacy spi-cs-high property
to properly activate CS.

Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/omap3-gta04.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -120,6 +120,7 @@
 			spi-max-frequency = <100000>;
 			spi-cpol;
 			spi-cpha;
+			spi-cs-high;
 
 			backlight= <&backlight>;
 			label = "lcd";



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 082/148] xen/balloon: Set pages PageOffline() in balloon_add_region()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (79 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 081/148] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 083/148] xen/xenbus: fix self-deadlock after killing user process Greg Kroah-Hartman
                   ` (71 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Marczykowski-Górecki,
	Boris Ostrovsky, Juergen Gross, Stefano Stabellini,
	David Hildenbrand

From: David Hildenbrand <david@redhat.com>

commit c5ad81eb029570c5ca5859539b0679f07a776d25 upstream.

We are missing a __SetPageOffline(), which is why we can get
!PageOffline() pages onto the balloon list, where
alloc_xenballooned_pages() will complain:

page:ffffea0003e7ffc0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xffffe00001000(reserved)
raw: 000ffffe00001000 dead000000000100 dead000000000200 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageOffline(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:744!
invalid opcode: 0000 [#1] SMP NOPTI

Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: 77c4adf6a6df ("xen/balloon: mark inflated pages PG_offline")
Cc: stable@vger.kernel.org # v5.1+
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/balloon.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -688,6 +688,7 @@ static void __init balloon_add_region(un
 		/* totalram_pages and totalhigh_pages do not
 		   include the boot-time balloon extension, so
 		   don't subtract from it. */
+		__SetPageOffline(page);
 		__balloon_append(page);
 	}
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 083/148] xen/xenbus: fix self-deadlock after killing user process
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (80 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 082/148] xen/balloon: Set pages PageOffline() in balloon_add_region() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 084/148] ieee802154: atusb: fix use-after-free at disconnect Greg Kroah-Hartman
                   ` (70 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, James Dingwall, Juergen Gross,
	Boris Ostrovsky

From: Juergen Gross <jgross@suse.com>

commit a8fabb38525c51a094607768bac3ba46b3f4a9d5 upstream.

In case a user process using xenbus has open transactions and is killed
e.g. via ctrl-C the following cleanup of the allocated resources might
result in a deadlock due to trying to end a transaction in the xenbus
worker thread:

[ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds.
[ 2551.492215]       Tainted: P           OE     5.0.0-29-generic #5
[ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2551.528585] xenbus          D    0    37      2 0x80000080
[ 2551.528590] Call Trace:
[ 2551.528603]  __schedule+0x2c0/0x870
[ 2551.528606]  ? _cond_resched+0x19/0x40
[ 2551.528632]  schedule+0x2c/0x70
[ 2551.528637]  xs_talkv+0x1ec/0x2b0
[ 2551.528642]  ? wait_woken+0x80/0x80
[ 2551.528645]  xs_single+0x53/0x80
[ 2551.528648]  xenbus_transaction_end+0x3b/0x70
[ 2551.528651]  xenbus_file_free+0x5a/0x160
[ 2551.528654]  xenbus_dev_queue_reply+0xc4/0x220
[ 2551.528657]  xenbus_thread+0x7de/0x880
[ 2551.528660]  ? wait_woken+0x80/0x80
[ 2551.528665]  kthread+0x121/0x140
[ 2551.528667]  ? xb_read+0x1d0/0x1d0
[ 2551.528670]  ? kthread_park+0x90/0x90
[ 2551.528673]  ret_from_fork+0x35/0x40

Fix this by doing the cleanup via a workqueue instead.

Reported-by: James Dingwall <james@dingwall.me.uk>
Fixes: fd8aa9095a95c ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xenbus/xenbus_dev_frontend.c |   20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

--- a/drivers/xen/xenbus/xenbus_dev_frontend.c
+++ b/drivers/xen/xenbus/xenbus_dev_frontend.c
@@ -55,6 +55,7 @@
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/miscdevice.h>
+#include <linux/workqueue.h>
 
 #include <xen/xenbus.h>
 #include <xen/xen.h>
@@ -116,6 +117,8 @@ struct xenbus_file_priv {
 	wait_queue_head_t read_waitq;
 
 	struct kref kref;
+
+	struct work_struct wq;
 };
 
 /* Read out any raw xenbus messages queued up. */
@@ -300,14 +303,14 @@ static void watch_fired(struct xenbus_wa
 	mutex_unlock(&adap->dev_data->reply_mutex);
 }
 
-static void xenbus_file_free(struct kref *kref)
+static void xenbus_worker(struct work_struct *wq)
 {
 	struct xenbus_file_priv *u;
 	struct xenbus_transaction_holder *trans, *tmp;
 	struct watch_adapter *watch, *tmp_watch;
 	struct read_buffer *rb, *tmp_rb;
 
-	u = container_of(kref, struct xenbus_file_priv, kref);
+	u = container_of(wq, struct xenbus_file_priv, wq);
 
 	/*
 	 * No need for locking here because there are no other users,
@@ -333,6 +336,18 @@ static void xenbus_file_free(struct kref
 	kfree(u);
 }
 
+static void xenbus_file_free(struct kref *kref)
+{
+	struct xenbus_file_priv *u;
+
+	/*
+	 * We might be called in xenbus_thread().
+	 * Use workqueue to avoid deadlock.
+	 */
+	u = container_of(kref, struct xenbus_file_priv, kref);
+	schedule_work(&u->wq);
+}
+
 static struct xenbus_transaction_holder *xenbus_get_transaction(
 	struct xenbus_file_priv *u, uint32_t tx_id)
 {
@@ -650,6 +665,7 @@ static int xenbus_file_open(struct inode
 	INIT_LIST_HEAD(&u->watches);
 	INIT_LIST_HEAD(&u->read_buffers);
 	init_waitqueue_head(&u->read_waitq);
+	INIT_WORK(&u->wq, xenbus_worker);
 
 	mutex_init(&u->reply_mutex);
 	mutex_init(&u->msgbuffer_mutex);



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 084/148] ieee802154: atusb: fix use-after-free at disconnect
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (81 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 083/148] xen/xenbus: fix self-deadlock after killing user process Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 085/148] nl80211: validate beacon head Greg Kroah-Hartman
                   ` (69 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexander Aring,
	syzbot+f4509a9138a1472e7e80, Johan Hovold, Stefan Schmidt

From: Johan Hovold <johan@kernel.org>

commit 7fd25e6fc035f4b04b75bca6d7e8daa069603a76 upstream.

The disconnect callback was accessing the hardware-descriptor private
data after having having freed it.

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Cc: stable <stable@vger.kernel.org>     # 4.2
Cc: Alexander Aring <alex.aring@gmail.com>
Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ieee802154/atusb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -1137,10 +1137,11 @@ static void atusb_disconnect(struct usb_
 
 	ieee802154_unregister_hw(atusb->hw);
 
+	usb_put_dev(atusb->usb_dev);
+
 	ieee802154_free_hw(atusb->hw);
 
 	usb_set_intfdata(interface, NULL);
-	usb_put_dev(atusb->usb_dev);
 
 	pr_debug("%s done\n", __func__);
 }



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 085/148] nl80211: validate beacon head
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (82 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 084/148] ieee802154: atusb: fix use-after-free at disconnect Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 086/148] cfg80211: validate SSID/MBSSID element ordering assumption Greg Kroah-Hartman
                   ` (68 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg

From: Johannes Berg <johannes.berg@intel.com>

commit f88eb7c0d002a67ef31aeb7850b42ff69abc46dc upstream.

We currently don't validate the beacon head, i.e. the header,
fixed part and elements that are to go in front of the TIM
element. This means that the variable elements there can be
malformed, e.g. have a length exceeding the buffer size, but
most downstream code from this assumes that this has already
been checked.

Add the necessary checks to the netlink policy.

Cc: stable@vger.kernel.org
Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings")
Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/nl80211.c |   37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -201,6 +201,38 @@ cfg80211_get_dev_from_info(struct net *n
 	return __cfg80211_rdev_from_attrs(netns, info->attrs);
 }
 
+static int validate_beacon_head(const struct nlattr *attr,
+				struct netlink_ext_ack *extack)
+{
+	const u8 *data = nla_data(attr);
+	unsigned int len = nla_len(attr);
+	const struct element *elem;
+	const struct ieee80211_mgmt *mgmt = (void *)data;
+	unsigned int fixedlen = offsetof(struct ieee80211_mgmt,
+					 u.beacon.variable);
+
+	if (len < fixedlen)
+		goto err;
+
+	if (ieee80211_hdrlen(mgmt->frame_control) !=
+	    offsetof(struct ieee80211_mgmt, u.beacon))
+		goto err;
+
+	data += fixedlen;
+	len -= fixedlen;
+
+	for_each_element(elem, data, len) {
+		/* nothing */
+	}
+
+	if (for_each_element_completed(elem, data, len))
+		return 0;
+
+err:
+	NL_SET_ERR_MSG_ATTR(extack, attr, "malformed beacon head");
+	return -EINVAL;
+}
+
 static int validate_ie_attr(const struct nlattr *attr,
 			    struct netlink_ext_ack *extack)
 {
@@ -322,8 +354,9 @@ const struct nla_policy nl80211_policy[N
 
 	[NL80211_ATTR_BEACON_INTERVAL] = { .type = NLA_U32 },
 	[NL80211_ATTR_DTIM_PERIOD] = { .type = NLA_U32 },
-	[NL80211_ATTR_BEACON_HEAD] = { .type = NLA_BINARY,
-				       .len = IEEE80211_MAX_DATA_LEN },
+	[NL80211_ATTR_BEACON_HEAD] =
+		NLA_POLICY_VALIDATE_FN(NLA_BINARY, validate_beacon_head,
+				       IEEE80211_MAX_DATA_LEN),
 	[NL80211_ATTR_BEACON_TAIL] =
 		NLA_POLICY_VALIDATE_FN(NLA_BINARY, validate_ie_attr,
 				       IEEE80211_MAX_DATA_LEN),



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 086/148] cfg80211: validate SSID/MBSSID element ordering assumption
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (83 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 085/148] nl80211: validate beacon head Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 087/148] cfg80211: initialize on-stack chandefs Greg Kroah-Hartman
                   ` (67 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Johannes Berg

From: Johannes Berg <johannes.berg@intel.com>

commit 242b0931c1918c56cd1dc5563fd250a3c39b996d upstream.

The code copying the data assumes that the SSID element is
before the MBSSID element, but since the data is untrusted
from the AP, this cannot be guaranteed.

Validate that this is indeed the case and ignore the MBSSID
otherwise, to avoid having to deal with both cases for the
copy of data that should be between them.

Cc: stable@vger.kernel.org
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/scan.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -1711,7 +1711,12 @@ cfg80211_update_notlisted_nontrans(struc
 		return;
 	new_ie_len -= trans_ssid[1];
 	mbssid = cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen);
-	if (!mbssid)
+	/*
+	 * It's not valid to have the MBSSID element before SSID
+	 * ignore if that happens - the code below assumes it is
+	 * after (while copying things inbetween).
+	 */
+	if (!mbssid || mbssid < trans_ssid)
 		return;
 	new_ie_len -= mbssid[1];
 	rcu_read_lock();



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 087/148] cfg80211: initialize on-stack chandefs
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (84 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 086/148] cfg80211: validate SSID/MBSSID element ordering assumption Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 088/148] drivers: thermal: qcom: tsens: Fix memory leak from qfprom read Greg Kroah-Hartman
                   ` (66 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Dmitry Osipenko, Johannes Berg

From: Johannes Berg <johannes.berg@intel.com>

commit f43e5210c739fe76a4b0ed851559d6902f20ceb1 upstream.

In a few places we don't properly initialize on-stack chandefs,
resulting in EDMG data to be non-zero, which broke things.

Additionally, in a few places we rely on the driver to init the
data completely, but perhaps we shouldn't as non-EDMG drivers
may not initialize the EDMG data, also initialize it there.

Cc: stable@vger.kernel.org
Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/nl80211.c     |    4 +++-
 net/wireless/reg.c         |    2 +-
 net/wireless/wext-compat.c |    2 +-
 3 files changed, 5 insertions(+), 3 deletions(-)

--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -2597,6 +2597,8 @@ int nl80211_parse_chandef(struct cfg8021
 
 	control_freq = nla_get_u32(attrs[NL80211_ATTR_WIPHY_FREQ]);
 
+	memset(chandef, 0, sizeof(*chandef));
+
 	chandef->chan = ieee80211_get_channel(&rdev->wiphy, control_freq);
 	chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
 	chandef->center_freq1 = control_freq;
@@ -3125,7 +3127,7 @@ static int nl80211_send_iface(struct sk_
 
 	if (rdev->ops->get_channel) {
 		int ret;
-		struct cfg80211_chan_def chandef;
+		struct cfg80211_chan_def chandef = {};
 
 		ret = rdev_get_channel(rdev, wdev, &chandef);
 		if (ret == 0) {
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2108,7 +2108,7 @@ static void reg_call_notifier(struct wip
 
 static bool reg_wdev_chan_valid(struct wiphy *wiphy, struct wireless_dev *wdev)
 {
-	struct cfg80211_chan_def chandef;
+	struct cfg80211_chan_def chandef = {};
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
 	enum nl80211_iftype iftype;
 
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -797,7 +797,7 @@ static int cfg80211_wext_giwfreq(struct
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
-	struct cfg80211_chan_def chandef;
+	struct cfg80211_chan_def chandef = {};
 	int ret;
 
 	switch (wdev->iftype) {



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 088/148] drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (85 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 087/148] cfg80211: initialize on-stack chandefs Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 089/148] ima: always return negative code for error Greg Kroah-Hartman
                   ` (65 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Srinivas Kandagatla, Amit Kucheria,
	Zhang Rui, Sasha Levin

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit 6b8249abb093551ef173d13a25ed0044d5dd33e0 ]

memory returned as part of nvmem_read via qfprom_read should be
freed by the consumer once done.
Existing code is not doing it so fix it.

Below memory leak detected by kmemleak
   [<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
    [<ffffff80081df120>] __kmalloc+0xe8/0x168
    [<ffffff80086db350>] nvmem_cell_read+0x30/0x80
    [<ffffff8008632790>] qfprom_read+0x4c/0x7c
    [<ffffff80086335a4>] calibrate_v1+0x34/0x204
    [<ffffff8008632518>] tsens_probe+0x164/0x258
    [<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
    [<ffffff80084de4f4>] really_probe+0x208/0x248
    [<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
    [<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
    [<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
    [<ffffff80084de634>] __device_attach+0x8c/0x100
    [<ffffff80084de6c8>] device_initial_probe+0x20/0x28
    [<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
    [<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
    [<ffffff80080c3da8>] process_one_work+0x160/0x2f8

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/qcom/tsens-8960.c |  2 ++
 drivers/thermal/qcom/tsens-v0_1.c | 12 ++++++++++--
 drivers/thermal/qcom/tsens-v1.c   |  1 +
 drivers/thermal/qcom/tsens.h      |  1 +
 4 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 8d9b721dadb65..e46a4e3f25c42 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -229,6 +229,8 @@ static int calibrate_8960(struct tsens_priv *priv)
 	for (i = 0; i < num_read; i++, s++)
 		s->offset = data[i];
 
+	kfree(data);
+
 	return 0;
 }
 
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 6f26fadf4c279..055647bcee67d 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -145,8 +145,10 @@ static int calibrate_8916(struct tsens_priv *priv)
 		return PTR_ERR(qfprom_cdata);
 
 	qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
-	if (IS_ERR(qfprom_csel))
+	if (IS_ERR(qfprom_csel)) {
+		kfree(qfprom_cdata);
 		return PTR_ERR(qfprom_csel);
+	}
 
 	mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
 	dev_dbg(priv->dev, "calibration mode is %d\n", mode);
@@ -181,6 +183,8 @@ static int calibrate_8916(struct tsens_priv *priv)
 	}
 
 	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
+	kfree(qfprom_csel);
 
 	return 0;
 }
@@ -198,8 +202,10 @@ static int calibrate_8974(struct tsens_priv *priv)
 		return PTR_ERR(calib);
 
 	bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
-	if (IS_ERR(bkp))
+	if (IS_ERR(bkp)) {
+		kfree(calib);
 		return PTR_ERR(bkp);
+	}
 
 	calib_redun_sel =  bkp[1] & BKP_REDUN_SEL;
 	calib_redun_sel >>= BKP_REDUN_SHIFT;
@@ -313,6 +319,8 @@ static int calibrate_8974(struct tsens_priv *priv)
 	}
 
 	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(calib);
+	kfree(bkp);
 
 	return 0;
 }
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 10b595d4f6199..870f502f2cb6c 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -138,6 +138,7 @@ static int calibrate_v1(struct tsens_priv *priv)
 	}
 
 	compute_intercept_slope(priv, p1, p2, mode);
+	kfree(qfprom_cdata);
 
 	return 0;
 }
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 2fd94997245bf..b89083b61c383 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -17,6 +17,7 @@
 
 #include <linux/thermal.h>
 #include <linux/regmap.h>
+#include <linux/slab.h>
 
 struct tsens_priv;
 
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 089/148] ima: always return negative code for error
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (86 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 088/148] drivers: thermal: qcom: tsens: Fix memory leak from qfprom read Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 090/148] ima: fix freeing ongoing ahash_request Greg Kroah-Hartman
                   ` (64 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sascha Hauer, Mimi Zohar, Sasha Levin

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit f5e1040196dbfe14c77ce3dfe3b7b08d2d961e88 ]

integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/ima/ima_crypto.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index d4c7b8e1b083d..7532b062be594 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -268,8 +268,11 @@ static int ima_calc_file_hash_atfm(struct file *file,
 		rbuf_len = min_t(loff_t, i_size - offset, rbuf_size[active]);
 		rc = integrity_kernel_read(file, offset, rbuf[active],
 					   rbuf_len);
-		if (rc != rbuf_len)
+		if (rc != rbuf_len) {
+			if (rc >= 0)
+				rc = -EINVAL;
 			goto out3;
+		}
 
 		if (rbuf[1] && offset) {
 			/* Using two buffers, and it is not the first
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 090/148] ima: fix freeing ongoing ahash_request
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (87 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 089/148] ima: always return negative code for error Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 091/148] fs: nfs: Fix possible null-pointer dereferences in encode_attrs() Greg Kroah-Hartman
                   ` (63 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sascha Hauer, Mimi Zohar, Sasha Levin

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit 4ece3125f21b1d42b84896c5646dbf0e878464e1 ]

integrity_kernel_read() can fail in which case we forward to call
ahash_request_free() on a currently running request. We have to wait
for its completion before we can free the request.

This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0
cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/ima/ima_crypto.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/security/integrity/ima/ima_crypto.c b/security/integrity/ima/ima_crypto.c
index 7532b062be594..73044fc6a9521 100644
--- a/security/integrity/ima/ima_crypto.c
+++ b/security/integrity/ima/ima_crypto.c
@@ -271,6 +271,11 @@ static int ima_calc_file_hash_atfm(struct file *file,
 		if (rc != rbuf_len) {
 			if (rc >= 0)
 				rc = -EINVAL;
+			/*
+			 * Forward current rc, do not overwrite with return value
+			 * from ahash_wait()
+			 */
+			ahash_wait(ahash_rc, &wait);
 			goto out3;
 		}
 
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 091/148] fs: nfs: Fix possible null-pointer dereferences in encode_attrs()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (88 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 090/148] ima: fix freeing ongoing ahash_request Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 092/148] xprtrdma: Toggle XPRT_CONGESTED in xprtrdmas slot methods Greg Kroah-Hartman
                   ` (62 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jia-Ju Bai, Anna Schumaker, Sasha Levin

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit e2751463eaa6f9fec8fea80abbdc62dbc487b3c5 ]

In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
    if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))

When label is NULL, it is used on lines 1178-1181:
    *p++ = cpu_to_be32(label->lfs);
    *p++ = cpu_to_be32(label->pi);
    *p++ = cpu_to_be32(label->len);
    p = xdr_encode_opaque_fixed(p, label->label, label->len);

To fix these bugs, label is checked before being used.

These bugs are found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4xdr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 46a8d636d151e..ab07db0f07cde 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1174,7 +1174,7 @@ static void encode_attrs(struct xdr_stream *xdr, const struct iattr *iap,
 		} else
 			*p++ = cpu_to_be32(NFS4_SET_TO_SERVER_TIME);
 	}
-	if (bmval[2] & FATTR4_WORD2_SECURITY_LABEL) {
+	if (label && (bmval[2] & FATTR4_WORD2_SECURITY_LABEL)) {
 		*p++ = cpu_to_be32(label->lfs);
 		*p++ = cpu_to_be32(label->pi);
 		*p++ = cpu_to_be32(label->len);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 092/148] xprtrdma: Toggle XPRT_CONGESTED in xprtrdmas slot methods
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (89 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 091/148] fs: nfs: Fix possible null-pointer dereferences in encode_attrs() Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 093/148] xprtrdma: Send Queue size grows after a reconnect Greg Kroah-Hartman
                   ` (61 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chuck Lever, Anna Schumaker, Sasha Levin

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 395790566eec37706dedeb94779045adc3a7581e ]

Commit 48be539dd44a ("xprtrdma: Introduce ->alloc_slot call-out for
xprtrdma") added a separate alloc_slot and free_slot to the RPC/RDMA
transport. Later, commit 75891f502f5f ("SUNRPC: Support for
congestion control when queuing is enabled") modified the generic
alloc/free_slot methods, but neglected the methods in xprtrdma.

Found via code review.

Fixes: 75891f502f5f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/transport.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 2ec349ed47702..f4763e8a67617 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -571,6 +571,7 @@ xprt_rdma_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task)
 	return;
 
 out_sleep:
+	set_bit(XPRT_CONGESTED, &xprt->state);
 	rpc_sleep_on(&xprt->backlog, task, NULL);
 	task->tk_status = -EAGAIN;
 }
@@ -589,7 +590,8 @@ xprt_rdma_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *rqst)
 
 	memset(rqst, 0, sizeof(*rqst));
 	rpcrdma_buffer_put(&r_xprt->rx_buf, rpcr_to_rdmar(rqst));
-	rpc_wake_up_next(&xprt->backlog);
+	if (unlikely(!rpc_wake_up_next(&xprt->backlog)))
+		clear_bit(XPRT_CONGESTED, &xprt->state);
 }
 
 static bool rpcrdma_check_regbuf(struct rpcrdma_xprt *r_xprt,
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 093/148] xprtrdma: Send Queue size grows after a reconnect
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (90 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 092/148] xprtrdma: Toggle XPRT_CONGESTED in xprtrdmas slot methods Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 094/148] 9p: Transport error uninitialized Greg Kroah-Hartman
                   ` (60 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Eli Dorfman, Chuck Lever,
	Anna Schumaker, Sasha Levin

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 98ef77d1aaa7a2f4e1b2a721faa084222021fda7 ]

Eli Dorfman reports that after a series of idle disconnects, an
RPC/RDMA transport becomes unusable (rdma_create_qp returns
-ENOMEM). Problem was tracked down to increasing Send Queue size
after each reconnect.

The rdma_create_qp() API does not promise to leave its @qp_init_attr
parameter unaltered. In fact, some drivers do modify one or more of
its fields. Thus our calls to rdma_create_qp must use a fresh copy
of ib_qp_init_attr each time.

This fix is appropriate for kernels dating back to late 2007, though
it will have to be adapted, as the connect code has changed over the
years.

Reported-by: Eli Dorfman <eli@vastdata.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/verbs.c | 26 ++++++++++++++------------
 1 file changed, 14 insertions(+), 12 deletions(-)

diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 805b1f35e1caa..2bd9b4de0e325 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -605,10 +605,10 @@ void rpcrdma_ep_destroy(struct rpcrdma_xprt *r_xprt)
  * Unlike a normal reconnection, a fresh PD and a new set
  * of MRs and buffers is needed.
  */
-static int
-rpcrdma_ep_recreate_xprt(struct rpcrdma_xprt *r_xprt,
-			 struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
+static int rpcrdma_ep_recreate_xprt(struct rpcrdma_xprt *r_xprt,
+				    struct ib_qp_init_attr *qp_init_attr)
 {
+	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
 	int rc, err;
 
 	trace_xprtrdma_reinsert(r_xprt);
@@ -625,7 +625,7 @@ rpcrdma_ep_recreate_xprt(struct rpcrdma_xprt *r_xprt,
 	}
 
 	rc = -ENETUNREACH;
-	err = rdma_create_qp(ia->ri_id, ia->ri_pd, &ep->rep_attr);
+	err = rdma_create_qp(ia->ri_id, ia->ri_pd, qp_init_attr);
 	if (err) {
 		pr_err("rpcrdma: rdma_create_qp returned %d\n", err);
 		goto out3;
@@ -642,16 +642,16 @@ rpcrdma_ep_recreate_xprt(struct rpcrdma_xprt *r_xprt,
 	return rc;
 }
 
-static int
-rpcrdma_ep_reconnect(struct rpcrdma_xprt *r_xprt, struct rpcrdma_ep *ep,
-		     struct rpcrdma_ia *ia)
+static int rpcrdma_ep_reconnect(struct rpcrdma_xprt *r_xprt,
+				struct ib_qp_init_attr *qp_init_attr)
 {
+	struct rpcrdma_ia *ia = &r_xprt->rx_ia;
 	struct rdma_cm_id *id, *old;
 	int err, rc;
 
 	trace_xprtrdma_reconnect(r_xprt);
 
-	rpcrdma_ep_disconnect(ep, ia);
+	rpcrdma_ep_disconnect(&r_xprt->rx_ep, ia);
 
 	rc = -EHOSTUNREACH;
 	id = rpcrdma_create_id(r_xprt, ia);
@@ -673,7 +673,7 @@ rpcrdma_ep_reconnect(struct rpcrdma_xprt *r_xprt, struct rpcrdma_ep *ep,
 		goto out_destroy;
 	}
 
-	err = rdma_create_qp(id, ia->ri_pd, &ep->rep_attr);
+	err = rdma_create_qp(id, ia->ri_pd, qp_init_attr);
 	if (err)
 		goto out_destroy;
 
@@ -698,25 +698,27 @@ rpcrdma_ep_connect(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
 	struct rpcrdma_xprt *r_xprt = container_of(ia, struct rpcrdma_xprt,
 						   rx_ia);
 	struct rpc_xprt *xprt = &r_xprt->rx_xprt;
+	struct ib_qp_init_attr qp_init_attr;
 	int rc;
 
 retry:
+	memcpy(&qp_init_attr, &ep->rep_attr, sizeof(qp_init_attr));
 	switch (ep->rep_connected) {
 	case 0:
 		dprintk("RPC:       %s: connecting...\n", __func__);
-		rc = rdma_create_qp(ia->ri_id, ia->ri_pd, &ep->rep_attr);
+		rc = rdma_create_qp(ia->ri_id, ia->ri_pd, &qp_init_attr);
 		if (rc) {
 			rc = -ENETUNREACH;
 			goto out_noupdate;
 		}
 		break;
 	case -ENODEV:
-		rc = rpcrdma_ep_recreate_xprt(r_xprt, ep, ia);
+		rc = rpcrdma_ep_recreate_xprt(r_xprt, &qp_init_attr);
 		if (rc)
 			goto out_noupdate;
 		break;
 	default:
-		rc = rpcrdma_ep_reconnect(r_xprt, ep, ia);
+		rc = rpcrdma_ep_reconnect(r_xprt, &qp_init_attr);
 		if (rc)
 			goto out;
 	}
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 094/148] 9p: Transport error uninitialized
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (91 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 093/148] xprtrdma: Send Queue size grows after a reconnect Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 095/148] 9p: avoid attaching writeback_fid on mmap with type PRIVATE Greg Kroah-Hartman
                   ` (59 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lu Shuaibing, Dominique Martinet,
	Sasha Levin

From: Lu Shuaibing <shuaibinglu@126.com>

[ Upstream commit 0ce772fe79b68f83df40f07f28207b292785c677 ]

The p9_tag_alloc() does not initialize the transport error t_err field.
The struct p9_req_t *req is allocated and stored in a struct p9_client
variable. The field t_err is never initialized before p9_conn_cancel()
checks its value.

KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports this bug.

==================================================================
BUG: KUMSAN: use of uninitialized memory in p9_conn_cancel+0x2d9/0x3b0
Read of size 4 at addr ffff88805f9b600c by task kworker/1:2/1216

CPU: 1 PID: 1216 Comm: kworker/1:2 Not tainted 5.2.0-rc4+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Workqueue: events p9_write_work
Call Trace:
 dump_stack+0x75/0xae
 __kumsan_report+0x17c/0x3e6
 kumsan_report+0xe/0x20
 p9_conn_cancel+0x2d9/0x3b0
 p9_write_work+0x183/0x4a0
 process_one_work+0x4d1/0x8c0
 worker_thread+0x6e/0x780
 kthread+0x1ca/0x1f0
 ret_from_fork+0x35/0x40

Allocated by task 1979:
 save_stack+0x19/0x80
 __kumsan_kmalloc.constprop.3+0xbc/0x120
 kmem_cache_alloc+0xa7/0x170
 p9_client_prepare_req.part.9+0x3b/0x380
 p9_client_rpc+0x15e/0x880
 p9_client_create+0x3d0/0xac0
 v9fs_session_init+0x192/0xc80
 v9fs_mount+0x67/0x470
 legacy_get_tree+0x70/0xd0
 vfs_get_tree+0x4a/0x1c0
 do_mount+0xba9/0xf90
 ksys_mount+0xa8/0x120
 __x64_sys_mount+0x62/0x70
 do_syscall_64+0x6d/0x1e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff88805f9b6008
 which belongs to the cache p9_req_t of size 144
The buggy address is located 4 bytes inside of
 144-byte region [ffff88805f9b6008, ffff88805f9b6098)
The buggy address belongs to the page:
page:ffffea00017e6d80 refcount:1 mapcount:0 mapping:ffff888068b63740 index:0xffff88805f9b7d90 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffff888068b66450 ffff888068b66450 ffff888068b63740
raw: ffff88805f9b7d90 0000000000100001 00000001ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================

Link: http://lkml.kernel.org/r/20190613070854.10434-1-shuaibinglu@126.com
Signed-off-by: Lu Shuaibing <shuaibinglu@126.com>
[dominique.martinet@cea.fr: grouped the added init with the others]
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/client.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/9p/client.c b/net/9p/client.c
index 9622f3e469f67..1d48afc7033ca 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -281,6 +281,7 @@ p9_tag_alloc(struct p9_client *c, int8_t type, unsigned int max_size)
 
 	p9pdu_reset(&req->tc);
 	p9pdu_reset(&req->rc);
+	req->t_err = 0;
 	req->status = REQ_STATUS_ALLOC;
 	init_waitqueue_head(&req->wq);
 	INIT_LIST_HEAD(&req->req_list);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 095/148] 9p: avoid attaching writeback_fid on mmap with type PRIVATE
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (92 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 094/148] 9p: Transport error uninitialized Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 096/148] xen/pci: reserve MCFG areas earlier Greg Kroah-Hartman
                   ` (58 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chengguang Xu, Dominique Martinet,
	Sasha Levin

From: Chengguang Xu <cgxu519@zoho.com.cn>

[ Upstream commit c87a37ebd40b889178664c2c09cc187334146292 ]

Currently on mmap cache policy, we always attach writeback_fid
whether mmap type is SHARED or PRIVATE. However, in the use case
of kata-container which combines 9p(Guest OS) with overlayfs(Host OS),
this behavior will trigger overlayfs' copy-up when excute command
inside container.

Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cn
Signed-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/9p/vfs_file.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 4cc966a31cb37..fe7f0bd2048e4 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -513,6 +513,7 @@ v9fs_mmap_file_mmap(struct file *filp, struct vm_area_struct *vma)
 	v9inode = V9FS_I(inode);
 	mutex_lock(&v9inode->v_mutex);
 	if (!v9inode->writeback_fid &&
+	    (vma->vm_flags & VM_SHARED) &&
 	    (vma->vm_flags & VM_WRITE)) {
 		/*
 		 * clone a fid and add it to writeback_fid
@@ -614,6 +615,8 @@ static void v9fs_mmap_vm_close(struct vm_area_struct *vma)
 			(vma->vm_end - vma->vm_start - 1),
 	};
 
+	if (!(vma->vm_flags & VM_SHARED))
+		return;
 
 	p9_debug(P9_DEBUG_VFS, "9p VMA close, %p, flushing", vma);
 
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 096/148] xen/pci: reserve MCFG areas earlier
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (93 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 095/148] 9p: avoid attaching writeback_fid on mmap with type PRIVATE Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 097/148] fuse: fix request limit Greg Kroah-Hartman
                   ` (57 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Igor Druzhinin, Boris Ostrovsky, Sasha Levin

From: Igor Druzhinin <igor.druzhinin@citrix.com>

[ Upstream commit a4098bc6eed5e31e0391bcc068e61804c98138df ]

If MCFG area is not reserved in E820, Xen by default will defer its usage
until Dom0 registers it explicitly after ACPI parser recognizes it as
a reserved resource in DSDT. Having it reserved in E820 is not
mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2)
and firmware is free to keep a hole in E820 in that place. Xen doesn't know
what exactly is inside this hole since it lacks full ACPI view of the
platform therefore it's potentially harmful to access MCFG region
without additional checks as some machines are known to provide
inconsistent information on the size of the region.

Now xen_mcfg_late() runs after acpi_init() which is too late as some basic
PCI enumeration starts exactly there as well. Trying to register a device
prior to MCFG reservation causes multiple problems with PCIe extended
capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are
no convenient hooks for us to subscribe to so register MCFG areas earlier
upon the first invocation of xen_add_device(). It should be safe to do once
since all the boot time buses must have their MCFG areas in MCFG table
already and we don't support PCI bus hot-plug.

Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/pci.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/xen/pci.c b/drivers/xen/pci.c
index 3eeb9bea76300..224df03ce42e3 100644
--- a/drivers/xen/pci.c
+++ b/drivers/xen/pci.c
@@ -17,6 +17,8 @@
 #include "../pci/pci.h"
 #ifdef CONFIG_PCI_MMCONFIG
 #include <asm/pci_x86.h>
+
+static int xen_mcfg_late(void);
 #endif
 
 static bool __read_mostly pci_seg_supported = true;
@@ -28,7 +30,18 @@ static int xen_add_device(struct device *dev)
 #ifdef CONFIG_PCI_IOV
 	struct pci_dev *physfn = pci_dev->physfn;
 #endif
-
+#ifdef CONFIG_PCI_MMCONFIG
+	static bool pci_mcfg_reserved = false;
+	/*
+	 * Reserve MCFG areas in Xen on first invocation due to this being
+	 * potentially called from inside of acpi_init immediately after
+	 * MCFG table has been finally parsed.
+	 */
+	if (!pci_mcfg_reserved) {
+		xen_mcfg_late();
+		pci_mcfg_reserved = true;
+	}
+#endif
 	if (pci_seg_supported) {
 		struct {
 			struct physdev_pci_device_add add;
@@ -201,7 +214,7 @@ static int __init register_xen_pci_notifier(void)
 arch_initcall(register_xen_pci_notifier);
 
 #ifdef CONFIG_PCI_MMCONFIG
-static int __init xen_mcfg_late(void)
+static int xen_mcfg_late(void)
 {
 	struct pci_mmcfg_region *cfg;
 	int rc;
@@ -240,8 +253,4 @@ static int __init xen_mcfg_late(void)
 	}
 	return 0;
 }
-/*
- * Needs to be done after acpi_init which are subsys_initcall.
- */
-subsys_initcall_sync(xen_mcfg_late);
 #endif
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 097/148] fuse: fix request limit
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (94 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 096/148] xen/pci: reserve MCFG areas earlier Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:35 ` [PATCH 5.3 098/148] ceph: fix directories inode i_blkbits initialization Greg Kroah-Hartman
                   ` (56 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Miklos Szeredi, Sasha Levin

From: Miklos Szeredi <mszeredi@redhat.com>

[ Upstream commit f22f812d5ce75a18b56073a7a63862e6ea764070 ]

The size of struct fuse_req was reduced from 392B to 144B on a non-debug
config, thus the sanitize_global_limit() helper was setting a larger
default limit.  This doesn't really reflect reduction in the memory used by
requests, since the fields removed from fuse_req were added to fuse_args
derived structs; e.g. sizeof(struct fuse_writepages_args) is 248B, thus
resulting in slightly more memory being used for writepage requests
overalll (due to using 256B slabs).

Make the calculatation ignore the size of fuse_req and use the old 392B
value.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/inode.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 987877860c019..f3104db3de83a 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -823,9 +823,12 @@ static const struct super_operations fuse_super_operations = {
 
 static void sanitize_global_limit(unsigned *limit)
 {
+	/*
+	 * The default maximum number of async requests is calculated to consume
+	 * 1/2^13 of the total memory, assuming 392 bytes per request.
+	 */
 	if (*limit == 0)
-		*limit = ((totalram_pages() << PAGE_SHIFT) >> 13) /
-			 sizeof(struct fuse_req);
+		*limit = ((totalram_pages() << PAGE_SHIFT) >> 13) / 392;
 
 	if (*limit >= 1 << 16)
 		*limit = (1 << 16) - 1;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 098/148] ceph: fix directories inode i_blkbits initialization
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (95 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 097/148] fuse: fix request limit Greg Kroah-Hartman
@ 2019-10-10  8:35 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 099/148] ceph: fetch cap_gen under spinlock in ceph_add_cap Greg Kroah-Hartman
                   ` (55 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:35 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Luis Henriques, Jeff Layton,
	Ilya Dryomov, Sasha Levin

From: Luis Henriques <lhenriques@suse.com>

[ Upstream commit 750670341a24cb714e624e0fd7da30900ad93752 ]

When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes.  Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'.  This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():

  UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
  shift exponent 255 is too large for 32-bit type 'int'

Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.

Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/inode.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 18500edefc56f..3b537e7038c7a 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -801,7 +801,12 @@ static int fill_inode(struct inode *inode, struct page *locked_page,
 
 	/* update inode */
 	inode->i_rdev = le32_to_cpu(info->rdev);
-	inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+	/* directories have fl_stripe_unit set to zero */
+	if (le32_to_cpu(info->layout.fl_stripe_unit))
+		inode->i_blkbits =
+			fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
+	else
+		inode->i_blkbits = CEPH_BLOCK_SHIFT;
 
 	__ceph_update_quota(ci, iinfo->max_bytes, iinfo->max_files);
 
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 099/148] ceph: fetch cap_gen under spinlock in ceph_add_cap
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (96 preceding siblings ...)
  2019-10-10  8:35 ` [PATCH 5.3 098/148] ceph: fix directories inode i_blkbits initialization Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 100/148] ceph: reconnect connection if session hang in opening state Greg Kroah-Hartman
                   ` (54 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jeff Layton, Yan, Zheng,
	Ilya Dryomov, Sasha Levin

From: Jeff Layton <jlayton@kernel.org>

[ Upstream commit 606d102327a45a49d293557527802ee7fbfd7af1 ]

It's protected by the s_gen_ttl_lock, so we should fetch under it
and ensure that we're using the same generation in both places.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/caps.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index ce0f5658720ab..8fd5301128106 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -645,6 +645,7 @@ void ceph_add_cap(struct inode *inode,
 	struct ceph_cap *cap;
 	int mds = session->s_mds;
 	int actual_wanted;
+	u32 gen;
 
 	dout("add_cap %p mds%d cap %llx %s seq %d\n", inode,
 	     session->s_mds, cap_id, ceph_cap_string(issued), seq);
@@ -656,6 +657,10 @@ void ceph_add_cap(struct inode *inode,
 	if (fmode >= 0)
 		wanted |= ceph_caps_for_mode(fmode);
 
+	spin_lock(&session->s_gen_ttl_lock);
+	gen = session->s_cap_gen;
+	spin_unlock(&session->s_gen_ttl_lock);
+
 	cap = __get_cap_for_mds(ci, mds);
 	if (!cap) {
 		cap = *new_cap;
@@ -681,7 +686,7 @@ void ceph_add_cap(struct inode *inode,
 		list_move_tail(&cap->session_caps, &session->s_caps);
 		spin_unlock(&session->s_cap_lock);
 
-		if (cap->cap_gen < session->s_cap_gen)
+		if (cap->cap_gen < gen)
 			cap->issued = cap->implemented = CEPH_CAP_PIN;
 
 		/*
@@ -775,7 +780,7 @@ void ceph_add_cap(struct inode *inode,
 	cap->seq = seq;
 	cap->issue_seq = seq;
 	cap->mseq = mseq;
-	cap->cap_gen = session->s_cap_gen;
+	cap->cap_gen = gen;
 
 	if (fmode >= 0)
 		__ceph_get_fmode(ci, fmode);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 100/148] ceph: reconnect connection if session hang in opening state
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (97 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 099/148] ceph: fetch cap_gen under spinlock in ceph_add_cap Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 101/148] SUNRPC: RPC level errors should always set task->tk_rpc_status Greg Kroah-Hartman
                   ` (53 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Yan, Zheng, Jeff Layton,
	Ilya Dryomov, Sasha Levin

From: Erqi Chen <chenerqi@gmail.com>

[ Upstream commit 71a228bc8d65900179e37ac309e678f8c523f133 ]

If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.

Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.

Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/mds_client.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 920e9f048bd8f..b11af7d8e8e93 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -4044,7 +4044,9 @@ static void delayed_work(struct work_struct *work)
 				pr_info("mds%d hung\n", s->s_mds);
 			}
 		}
-		if (s->s_state < CEPH_MDS_SESSION_OPEN) {
+		if (s->s_state == CEPH_MDS_SESSION_NEW ||
+		    s->s_state == CEPH_MDS_SESSION_RESTARTING ||
+		    s->s_state == CEPH_MDS_SESSION_REJECTED) {
 			/* this mds is failed or recovering, just wait */
 			ceph_put_mds_session(s);
 			continue;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 101/148] SUNRPC: RPC level errors should always set task->tk_rpc_status
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (98 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 100/148] ceph: reconnect connection if session hang in opening state Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 102/148] watchdog: aspeed: Add support for AST2600 Greg Kroah-Hartman
                   ` (52 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Anna Schumaker, Sasha Levin

From: Trond Myklebust <trondmy@gmail.com>

[ Upstream commit 714fbc73888f59321854e7f6c2f224213923bcad ]

Ensure that we set task->tk_rpc_status for all RPC level errors so that
the caller can distinguish between those and server reply status errors.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/clnt.c  | 6 +++---
 net/sunrpc/sched.c | 5 ++++-
 2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 7a75f34ad393b..e7fdc400506e8 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1837,7 +1837,7 @@ call_allocate(struct rpc_task *task)
 		return;
 	}
 
-	rpc_exit(task, -ERESTARTSYS);
+	rpc_call_rpcerror(task, -ERESTARTSYS);
 }
 
 static int
@@ -2561,7 +2561,7 @@ rpc_encode_header(struct rpc_task *task, struct xdr_stream *xdr)
 	return 0;
 out_fail:
 	trace_rpc_bad_callhdr(task);
-	rpc_exit(task, error);
+	rpc_call_rpcerror(task, error);
 	return error;
 }
 
@@ -2628,7 +2628,7 @@ rpc_decode_header(struct rpc_task *task, struct xdr_stream *xdr)
 		return -EAGAIN;
 	}
 out_err:
-	rpc_exit(task, error);
+	rpc_call_rpcerror(task, error);
 	return error;
 
 out_unparsable:
diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
index 1f275aba786fc..53934fe73a9db 100644
--- a/net/sunrpc/sched.c
+++ b/net/sunrpc/sched.c
@@ -930,8 +930,10 @@ static void __rpc_execute(struct rpc_task *task)
 		/*
 		 * Signalled tasks should exit rather than sleep.
 		 */
-		if (RPC_SIGNALLED(task))
+		if (RPC_SIGNALLED(task)) {
+			task->tk_rpc_status = -ERESTARTSYS;
 			rpc_exit(task, -ERESTARTSYS);
+		}
 
 		/*
 		 * The queue->lock protects against races with
@@ -967,6 +969,7 @@ static void __rpc_execute(struct rpc_task *task)
 			 */
 			dprintk("RPC: %5u got signal\n", task->tk_pid);
 			set_bit(RPC_TASK_SIGNALLED, &task->tk_runstate);
+			task->tk_rpc_status = -ERESTARTSYS;
 			rpc_exit(task, -ERESTARTSYS);
 		}
 		dprintk("RPC: %5u sync task resuming\n", task->tk_pid);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 102/148] watchdog: aspeed: Add support for AST2600
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (99 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 101/148] SUNRPC: RPC level errors should always set task->tk_rpc_status Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 103/148] netfilter: nf_tables: allow lookups in dynamic sets Greg Kroah-Hartman
                   ` (51 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Ryan Chen, Joel Stanley,
	Guenter Roeck, Wim Van Sebroeck, Sasha Levin

From: Ryan Chen <ryan_chen@aspeedtech.com>

[ Upstream commit b3528b4874480818e38e4da019d655413c233e6a ]

The ast2600 can be supported by the same code as the ast2500.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/aspeed_wdt.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index cc71861e033a5..5b64bc2e87888 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -34,6 +34,7 @@ static const struct aspeed_wdt_config ast2500_config = {
 static const struct of_device_id aspeed_wdt_of_table[] = {
 	{ .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-wdt", .data = &ast2500_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
@@ -259,7 +260,8 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
 	}
 
-	if (of_device_is_compatible(np, "aspeed,ast2500-wdt")) {
+	if ((of_device_is_compatible(np, "aspeed,ast2500-wdt")) ||
+		(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
 		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
 
 		reg &= config->ext_pulse_width_mask;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 103/148] netfilter: nf_tables: allow lookups in dynamic sets
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (100 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 102/148] watchdog: aspeed: Add support for AST2600 Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 104/148] drm/amdgpu: Fix KFD-related kernel oops on Hawaii Greg Kroah-Hartman
                   ` (50 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Florian Westphal, Pablo Neira Ayuso,
	Sasha Levin

From: Florian Westphal <fw@strlen.de>

[ Upstream commit acab713177377d9e0889c46bac7ff0cfb9a90c4d ]

This un-breaks lookups in sets that have the 'dynamic' flag set.
Given this active example configuration:

table filter {
  set set1 {
    type ipv4_addr
    size 64
    flags dynamic,timeout
    timeout 1m
  }

  chain input {
     type filter hook input priority 0; policy accept;
  }
}

... this works:
nft add rule ip filter input add @set1 { ip saddr }

-> whenever rule is triggered, the source ip address is inserted
into the set (if it did not exist).

This won't work:
nft add rule ip filter input ip saddr @set1 counter
Error: Could not process rule: Operation not supported

In other words, we can add entries to the set, but then can't make
matching decision based on that set.

That is just wrong -- all set backends support lookups (else they would
not be very useful).
The failure comes from an explicit rejection in nft_lookup.c.

Looking at the history, it seems like NFT_SET_EVAL used to mean
'set contains expressions' (aka. "is a meter"), for instance something like

 nft add rule ip filter input meter example { ip saddr limit rate 10/second }
 or
 nft add rule ip filter input meter example { ip saddr counter }

The actual meaning of NFT_SET_EVAL however, is
'set can be updated from the packet path'.

'meters' and packet-path insertions into sets, such as
'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c)
and thus require a set backend that provides the ->update() function.

The only set that provides this also is the only one that has the
NFT_SET_EVAL feature flag.

Removing the wrong check makes the above example work.
While at it, also fix the flag check during set instantiation to
allow supported combinations only.

Fixes: 8aeff920dcc9b3f ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 7 +++++--
 net/netfilter/nft_lookup.c    | 3 ---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index d47469f824a10..3b81323fa0171 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -3562,8 +3562,11 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk,
 			      NFT_SET_OBJECT))
 			return -EINVAL;
 		/* Only one of these operations is supported */
-		if ((flags & (NFT_SET_MAP | NFT_SET_EVAL | NFT_SET_OBJECT)) ==
-			     (NFT_SET_MAP | NFT_SET_EVAL | NFT_SET_OBJECT))
+		if ((flags & (NFT_SET_MAP | NFT_SET_OBJECT)) ==
+			     (NFT_SET_MAP | NFT_SET_OBJECT))
+			return -EOPNOTSUPP;
+		if ((flags & (NFT_SET_EVAL | NFT_SET_OBJECT)) ==
+			     (NFT_SET_EVAL | NFT_SET_OBJECT))
 			return -EOPNOTSUPP;
 	}
 
diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c
index c0560bf3c31bd..660bad688e2bc 100644
--- a/net/netfilter/nft_lookup.c
+++ b/net/netfilter/nft_lookup.c
@@ -73,9 +73,6 @@ static int nft_lookup_init(const struct nft_ctx *ctx,
 	if (IS_ERR(set))
 		return PTR_ERR(set);
 
-	if (set->flags & NFT_SET_EVAL)
-		return -EOPNOTSUPP;
-
 	priv->sreg = nft_parse_register(tb[NFTA_LOOKUP_SREG]);
 	err = nft_validate_register_load(priv->sreg, set->klen);
 	if (err < 0)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 104/148] drm/amdgpu: Fix KFD-related kernel oops on Hawaii
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (101 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 103/148] netfilter: nf_tables: allow lookups in dynamic sets Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 105/148] drm/amdgpu: Check for valid number of registers to read Greg Kroah-Hartman
                   ` (49 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Felix Kuehling, Christian König,
	Alex Deucher, Sasha Levin

From: Felix Kuehling <Felix.Kuehling@amd.com>

[ Upstream commit dcafbd50f2e4d5cc964aae409fb5691b743fba23 ]

Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.

Fixes: eb3961a57424 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
index 7850084a05e3a..60655834d6498 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
@@ -143,7 +143,8 @@ int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned num_ibs,
 	/* ring tests don't use a job */
 	if (job) {
 		vm = job->vm;
-		fence_ctx = job->base.s_fence->scheduled.context;
+		fence_ctx = job->base.s_fence ?
+			job->base.s_fence->scheduled.context : 0;
 	} else {
 		vm = NULL;
 		fence_ctx = 0;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 105/148] drm/amdgpu: Check for valid number of registers to read
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (102 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 104/148] drm/amdgpu: Fix KFD-related kernel oops on Hawaii Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 106/148] perf probe: Fix to clear tev->nargs in clear_probe_trace_event() Greg Kroah-Hartman
                   ` (48 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Trek, Alex Deucher, Sasha Levin

From: Trek <trek00@inbox.ru>

[ Upstream commit 73d8e6c7b841d9bf298c8928f228fb433676635c ]

Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273
Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index 0cf7e8606fd3d..00beba533582c 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -662,6 +662,9 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file
 		if (sh_num == AMDGPU_INFO_MMR_SH_INDEX_MASK)
 			sh_num = 0xffffffff;
 
+		if (info->read_mmr_reg.count > 128)
+			return -EINVAL;
+
 		regs = kmalloc_array(info->read_mmr_reg.count, sizeof(*regs), GFP_KERNEL);
 		if (!regs)
 			return -ENOMEM;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 106/148] perf probe: Fix to clear tev->nargs in clear_probe_trace_event()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (103 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 105/148] drm/amdgpu: Check for valid number of registers to read Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 107/148] pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors Greg Kroah-Hartman
                   ` (47 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Masami Hiramatsu,
	Arnaldo Carvalho de Melo, Jiri Olsa, Namhyung Kim, Wang Nan,
	Sasha Levin

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 9e6124d9d635957b56717f85219a88701617253f ]

Since add_probe_trace_event() can reuse tf->tevs[i] after calling
clear_probe_trace_event(), this can make perf-probe crash if the 1st
attempt of probe event finding fails to find an event argument, and the
2nd attempt fails to find probe point.

E.g.
  $ perf probe -D "task_pid_nr tsk"
  Failed to find 'tsk' in this function.
  Failed to get entry address of warn_bad_vsyscall
  Segmentation fault (core dumped)

Committer testing:

After the patch:

  $ perf probe -D "task_pid_nr tsk"
  Failed to find 'tsk' in this function.
  Failed to get entry address of warn_bad_vsyscall
  Failed to get entry address of signal_fault
  Failed to get entry address of show_signal
  Failed to get entry address of umip_printk
  Failed to get entry address of __bad_area_nosemaphore
  <SNIP>
  Failed to get entry address of sock_set_timeout
  Failed to get entry address of tcp_recvmsg
  Probe point 'task_pid_nr' not found.
    Error: Failed to add events.
  $

Fixes: 092b1f0b5f9f ("perf probe: Clear probe_trace_event when add_probe_trace_event() fails")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/156856587999.25775.5145779959474477595.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/probe-event.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 8394d48f8b32e..3355c445abedf 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -2329,6 +2329,7 @@ void clear_probe_trace_event(struct probe_trace_event *tev)
 		}
 	}
 	zfree(&tev->args);
+	tev->nargs = 0;
 }
 
 struct kprobe_blacklist_node {
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 107/148] pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (104 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 106/148] perf probe: Fix to clear tev->nargs in clear_probe_trace_event() Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 108/148] SUNRPC: Dont try to parse incomplete RPC messages Greg Kroah-Hartman
                   ` (46 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Anna Schumaker, Sasha Levin

From: Trond Myklebust <trondmy@gmail.com>

[ Upstream commit 9c47b18cf722184f32148784189fca945a7d0561 ]

IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.

Fixes: 1c5bd76d17cca ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pnfs.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c
index 4525d5acae386..0418b198edd3e 100644
--- a/fs/nfs/pnfs.c
+++ b/fs/nfs/pnfs.c
@@ -1449,10 +1449,15 @@ void pnfs_roc_release(struct nfs4_layoutreturn_args *args,
 	const nfs4_stateid *res_stateid = NULL;
 	struct nfs4_xdr_opaque_data *ld_private = args->ld_private;
 
-	if (ret == 0) {
-		arg_stateid = &args->stateid;
+	switch (ret) {
+	case -NFS4ERR_NOMATCHING_LAYOUT:
+		break;
+	case 0:
 		if (res->lrs_present)
 			res_stateid = &res->stateid;
+		/* Fallthrough */
+	default:
+		arg_stateid = &args->stateid;
 	}
 	pnfs_layoutreturn_free_lsegs(lo, arg_stateid, &args->range,
 			res_stateid);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 108/148] SUNRPC: Dont try to parse incomplete RPC messages
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (105 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 107/148] pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 109/148] pwm: stm32-lp: Add check in case requested period cannot be achieved Greg Kroah-Hartman
                   ` (45 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Trond Myklebust, Anna Schumaker, Sasha Levin

From: Trond Myklebust <trondmy@gmail.com>

[ Upstream commit 9ba828861c56a21d211d5d10f5643774b1ea330d ]

If the copy of the RPC reply into our buffers did not complete, and
we could end up with a truncated message. In that case, just resend
the call.

Fixes: a0584ee9aed80 ("SUNRPC: Use struct xdr_stream when decoding...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/clnt.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index e7fdc400506e8..f7f78566be463 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -2482,6 +2482,7 @@ call_decode(struct rpc_task *task)
 	struct rpc_clnt	*clnt = task->tk_client;
 	struct rpc_rqst	*req = task->tk_rqstp;
 	struct xdr_stream xdr;
+	int err;
 
 	dprint_status(task);
 
@@ -2504,6 +2505,15 @@ call_decode(struct rpc_task *task)
 	 * before it changed req->rq_reply_bytes_recvd.
 	 */
 	smp_rmb();
+
+	/*
+	 * Did we ever call xprt_complete_rqst()? If not, we should assume
+	 * the message is incomplete.
+	 */
+	err = -EAGAIN;
+	if (!req->rq_reply_bytes_recvd)
+		goto out;
+
 	req->rq_rcv_buf.len = req->rq_private_buf.len;
 
 	/* Check that the softirq receive buffer is valid */
@@ -2512,7 +2522,9 @@ call_decode(struct rpc_task *task)
 
 	xdr_init_decode(&xdr, &req->rq_rcv_buf,
 			req->rq_rcv_buf.head[0].iov_base, req);
-	switch (rpc_decode_header(task, &xdr)) {
+	err = rpc_decode_header(task, &xdr);
+out:
+	switch (err) {
 	case 0:
 		task->tk_action = rpc_exit_task;
 		task->tk_status = rpcauth_unwrap_resp(task, &xdr);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 109/148] pwm: stm32-lp: Add check in case requested period cannot be achieved
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (106 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 108/148] SUNRPC: Dont try to parse incomplete RPC messages Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 110/148] selftests/seccomp: fix build on older kernels Greg Kroah-Hartman
                   ` (44 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Fabrice Gasnier,
	Uwe Kleine-König, Thierry Reding, Sasha Levin

From: Fabrice Gasnier <fabrice.gasnier@st.com>

[ Upstream commit c91e3234c6035baf5a79763cb4fcd5d23ce75c2b ]

LPTimer can use a 32KHz clock for counting. It depends on clock tree
configuration. In such a case, PWM output frequency range is limited.
Although unlikely, nothing prevents user from requesting a PWM frequency
above counting clock (32KHz for instance):
- This causes (prd - 1) = 0xffff to be written in ARR register later in
the apply() routine.
This results in badly configured PWM period (and also duty_cycle).
Add a check to report an error is such a case.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pwm/pwm-stm32-lp.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 2211a642066db..97a9afa191ee0 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -59,6 +59,12 @@ static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	/* Calculate the period and prescaler value */
 	div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
 	do_div(div, NSEC_PER_SEC);
+	if (!div) {
+		/* Clock is too slow to achieve requested period. */
+		dev_dbg(priv->chip.dev, "Can't reach %u ns\n",	state->period);
+		return -EINVAL;
+	}
+
 	prd = div;
 	while (div > STM32_LPTIM_MAX_ARR) {
 		presc++;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 110/148] selftests/seccomp: fix build on older kernels
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (107 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 109/148] pwm: stm32-lp: Add check in case requested period cannot be achieved Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 111/148] x86/purgatory: Disable the stackleak GCC plugin for the purgatory Greg Kroah-Hartman
                   ` (43 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tycho Andersen, Kees Cook,
	Shuah Khan, Sasha Levin

From: Tycho Andersen <tycho@tycho.ws>

[ Upstream commit 88282297fff00796e81f5e67734a6afdfb31fbc4 ]

The seccomp selftest goes to some length to build against older kernel
headers, viz. all the #ifdefs at the beginning of the file.

Commit 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
introduces some additional macros, but doesn't do the #ifdef dance.
Let's add that dance here to avoid:

gcc -Wl,-no-as-needed -Wall  seccomp_bpf.c -lpthread -o seccomp_bpf
In file included from seccomp_bpf.c:51:
seccomp_bpf.c: In function ‘tracer_ptrace’:
seccomp_bpf.c:1787:20: error: ‘PTRACE_EVENTMSG_SYSCALL_ENTRY’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_CLONE’?
  EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
  __typeof__(_expected) __exp = (_expected); \
             ^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
  EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
  ^~~~~~~~~
seccomp_bpf.c:1787:20: note: each undeclared identifier is reported only once for each function it appears in
  EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
  __typeof__(_expected) __exp = (_expected); \
             ^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
  EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
  ^~~~~~~~~
seccomp_bpf.c:1788:6: error: ‘PTRACE_EVENTMSG_SYSCALL_EXIT’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_EXIT’?
    : PTRACE_EVENTMSG_SYSCALL_EXIT, msg);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
  __typeof__(_expected) __exp = (_expected); \
             ^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
  EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
  ^~~~~~~~~
make: *** [Makefile:12: seccomp_bpf] Error 1

[skhan@linuxfoundation.org: Fix checkpatch error in commit log]
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Fixes: 201766a20e30 ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/seccomp/seccomp_bpf.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/tools/testing/selftests/seccomp/seccomp_bpf.c b/tools/testing/selftests/seccomp/seccomp_bpf.c
index 6ef7f16c4cf52..7f8b5c8982e3b 100644
--- a/tools/testing/selftests/seccomp/seccomp_bpf.c
+++ b/tools/testing/selftests/seccomp/seccomp_bpf.c
@@ -199,6 +199,11 @@ struct seccomp_notif_sizes {
 };
 #endif
 
+#ifndef PTRACE_EVENTMSG_SYSCALL_ENTRY
+#define PTRACE_EVENTMSG_SYSCALL_ENTRY	1
+#define PTRACE_EVENTMSG_SYSCALL_EXIT	2
+#endif
+
 #ifndef seccomp
 int seccomp(unsigned int op, unsigned int flags, void *args)
 {
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 111/148] x86/purgatory: Disable the stackleak GCC plugin for the purgatory
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (108 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 110/148] selftests/seccomp: fix build on older kernels Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
       [not found]   ` <BYAPR04MB62468F03E52BCE23B5CD1C91AA940@BYAPR04MB6246.namprd04.prod.outlook.com>
  2019-10-10  8:36 ` [PATCH 5.3 112/148] ntb: point to right memory window index Greg Kroah-Hartman
                   ` (42 subsequent siblings)
  152 siblings, 1 reply; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Arvind Sankar, Nick Desaulniers,
	Borislav Petkov, H. Peter Anvin, Linus Torvalds, Peter Zijlstra,
	Thomas Gleixner, Ingo Molnar, Sasha Levin

From: Arvind Sankar <nivedita@alum.mit.edu>

[ Upstream commit ca14c996afe7228ff9b480cf225211cc17212688 ]

Since commit:

  b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")

kexec breaks if GCC_PLUGIN_STACKLEAK=y is enabled, as the purgatory
contains undefined references to stackleak_track_stack.

Attempting to load a kexec kernel results in this failure:

  kexec: Undefined symbol: stackleak_track_stack
  kexec-bzImage64: Loading purgatory failed

Fix this by disabling the stackleak plugin for the purgatory.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b059f801a937 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190923171753.GA2252517@rani.riverdale.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/purgatory/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index 10fb42da0007e..b81b5172cf994 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -23,6 +23,7 @@ KCOV_INSTRUMENT := n
 
 PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
 PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
+PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN)
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That
 # in turn leaves some undefined symbols like __fentry__ in purgatory and not
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 112/148] ntb: point to right memory window index
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (109 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 111/148] x86/purgatory: Disable the stackleak GCC plugin for the purgatory Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 113/148] thermal: Fix use-after-free when unregistering thermal zone device Greg Kroah-Hartman
                   ` (41 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Sanjay R Mehta, Jon Mason, Sasha Levin

From: Sanjay R Mehta <sanju.mehta@amd.com>

[ Upstream commit ae89339b08f3fe02457ec9edd512ddc3d246d0f8 ]

second parameter of ntb_peer_mw_get_addr is pointing to wrong memory
window index by passing "peer gidx" instead of "local gidx".

For ex, "local gidx" value is '0' and "peer gidx" value is '1', then

on peer side ntb_mw_set_trans() api is used as below with gidx pointing to
local side gidx which is '0', so memroy window '0' is chosen and XLAT '0'
will be programmed by peer side.

    ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat,
                    peer->inbuf_size);

Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx
pointing to "peer gidx" which is '1', so pointing to memory window '1'
instead of memory window '0'.

    ntb_peer_mw_get_addr(perf->ntb,  peer->gidx, &phys_addr,
                        &peer->outbuf_size);

So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr().

Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/test/ntb_perf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index d028331558ea7..e9b7c2dfc7301 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -1378,7 +1378,7 @@ static int perf_setup_peer_mw(struct perf_peer *peer)
 	int ret;
 
 	/* Get outbound MW parameters and map it */
-	ret = ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr,
+	ret = ntb_peer_mw_get_addr(perf->ntb, perf->gidx, &phys_addr,
 				   &peer->outbuf_size);
 	if (ret)
 		return ret;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 113/148] thermal: Fix use-after-free when unregistering thermal zone device
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (110 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 112/148] ntb: point to right memory window index Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 114/148] thermal_hwmon: Sanitize thermal_zone type Greg Kroah-Hartman
                   ` (40 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Jiri Pirko, Ido Schimmel, Zhang Rui,
	Sasha Levin

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 1851799e1d2978f68eea5d9dff322e121dcf59c1 ]

thermal_zone_device_unregister() cancels the delayed work that polls the
thermal zone, but it does not wait for it to finish. This is racy with
respect to the freeing of the thermal zone device, which can result in a
use-after-free [1].

Fix this by waiting for the delayed work to finish before freeing the
thermal zone device. Note that thermal_zone_device_set_polling() is
never invoked from an atomic context, so it is safe to call
cancel_delayed_work_sync() that can block.

[1]
[  +0.002221] ==================================================================
[  +0.000064] BUG: KASAN: use-after-free in __mutex_lock+0x1076/0x11c0
[  +0.000016] Read of size 8 at addr ffff8881e48e0450 by task kworker/1:0/17

[  +0.000023] CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.2.0-rc6-custom-02495-g8e73ca3be4af #1701
[  +0.000010] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[  +0.000016] Workqueue: events_freezable_power_ thermal_zone_device_check
[  +0.000012] Call Trace:
[  +0.000021]  dump_stack+0xa9/0x10e
[  +0.000020]  print_address_description.cold.2+0x9/0x25e
[  +0.000018]  __kasan_report.cold.3+0x78/0x9d
[  +0.000016]  kasan_report+0xe/0x20
[  +0.000016]  __mutex_lock+0x1076/0x11c0
[  +0.000014]  step_wise_throttle+0x72/0x150
[  +0.000018]  handle_thermal_trip+0x167/0x760
[  +0.000019]  thermal_zone_device_update+0x19e/0x5f0
[  +0.000019]  process_one_work+0x969/0x16f0
[  +0.000017]  worker_thread+0x91/0xc40
[  +0.000014]  kthread+0x33d/0x400
[  +0.000015]  ret_from_fork+0x3a/0x50

[  +0.000020] Allocated by task 1:
[  +0.000015]  save_stack+0x19/0x80
[  +0.000015]  __kasan_kmalloc.constprop.4+0xc1/0xd0
[  +0.000014]  kmem_cache_alloc_trace+0x152/0x320
[  +0.000015]  thermal_zone_device_register+0x1b4/0x13a0
[  +0.000015]  mlxsw_thermal_init+0xc92/0x23d0
[  +0.000014]  __mlxsw_core_bus_device_register+0x659/0x11b0
[  +0.000013]  mlxsw_core_bus_device_register+0x3d/0x90
[  +0.000013]  mlxsw_pci_probe+0x355/0x4b0
[  +0.000014]  local_pci_probe+0xc3/0x150
[  +0.000013]  pci_device_probe+0x280/0x410
[  +0.000013]  really_probe+0x26a/0xbb0
[  +0.000013]  driver_probe_device+0x208/0x2e0
[  +0.000013]  device_driver_attach+0xfe/0x140
[  +0.000013]  __driver_attach+0x110/0x310
[  +0.000013]  bus_for_each_dev+0x14b/0x1d0
[  +0.000013]  driver_register+0x1c0/0x400
[  +0.000015]  mlxsw_sp_module_init+0x5d/0xd3
[  +0.000014]  do_one_initcall+0x239/0x4dd
[  +0.000013]  kernel_init_freeable+0x42b/0x4e8
[  +0.000012]  kernel_init+0x11/0x18b
[  +0.000013]  ret_from_fork+0x3a/0x50

[  +0.000015] Freed by task 581:
[  +0.000013]  save_stack+0x19/0x80
[  +0.000014]  __kasan_slab_free+0x125/0x170
[  +0.000013]  kfree+0xf3/0x310
[  +0.000013]  thermal_release+0xc7/0xf0
[  +0.000014]  device_release+0x77/0x200
[  +0.000014]  kobject_put+0x1a8/0x4c0
[  +0.000014]  device_unregister+0x38/0xc0
[  +0.000014]  thermal_zone_device_unregister+0x54e/0x6a0
[  +0.000014]  mlxsw_thermal_fini+0x184/0x35a
[  +0.000014]  mlxsw_core_bus_device_unregister+0x10a/0x640
[  +0.000013]  mlxsw_devlink_core_bus_device_reload+0x92/0x210
[  +0.000015]  devlink_nl_cmd_reload+0x113/0x1f0
[  +0.000014]  genl_family_rcv_msg+0x700/0xee0
[  +0.000013]  genl_rcv_msg+0xca/0x170
[  +0.000013]  netlink_rcv_skb+0x137/0x3a0
[  +0.000012]  genl_rcv+0x29/0x40
[  +0.000013]  netlink_unicast+0x49b/0x660
[  +0.000013]  netlink_sendmsg+0x755/0xc90
[  +0.000013]  __sys_sendto+0x3de/0x430
[  +0.000013]  __x64_sys_sendto+0xe2/0x1b0
[  +0.000013]  do_syscall_64+0xa4/0x4d0
[  +0.000013]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[  +0.000017] The buggy address belongs to the object at ffff8881e48e0008
               which belongs to the cache kmalloc-2k of size 2048
[  +0.000012] The buggy address is located 1096 bytes inside of
               2048-byte region [ffff8881e48e0008, ffff8881e48e0808)
[  +0.000007] The buggy address belongs to the page:
[  +0.000012] page:ffffea0007923800 refcount:1 mapcount:0 mapping:ffff88823680d0c0 index:0x0 compound_mapcount: 0
[  +0.000020] flags: 0x200000000010200(slab|head)
[  +0.000019] raw: 0200000000010200 ffffea0007682008 ffffea00076ab808 ffff88823680d0c0
[  +0.000016] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[  +0.000007] page dumped because: kasan: bad access detected

[  +0.000012] Memory state around the buggy address:
[  +0.000012]  ffff8881e48e0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff8881e48e0380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012] >ffff8881e48e0400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000008]                                                  ^
[  +0.000012]  ffff8881e48e0480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff8881e48e0500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000007] ==================================================================

Fixes: b1569e99c795 ("ACPI: move thermal trip handling to generic thermal layer")
Reported-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 6bab66e84eb58..ebe15f2cf7fc3 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -304,7 +304,7 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
 				 &tz->poll_queue,
 				 msecs_to_jiffies(delay));
 	else
-		cancel_delayed_work(&tz->poll_queue);
+		cancel_delayed_work_sync(&tz->poll_queue);
 }
 
 static void monitor_thermal_zone(struct thermal_zone_device *tz)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 114/148] thermal_hwmon: Sanitize thermal_zone type
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (111 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 113/148] thermal: Fix use-after-free when unregistering thermal zone device Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 115/148] iommu/amd: Fix downgrading default page-sizes in alloc_pte() Greg Kroah-Hartman
                   ` (39 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Stefan Mavrodiev, Zhang Rui, Sasha Levin

From: Stefan Mavrodiev <stefan@olimex.com>

[ Upstream commit 8c7aa184281c01fc26f319059efb94725012921d ]

When calling thermal_add_hwmon_sysfs(), the device type is sanitized by
replacing '-' with '_'. However tz->type remains unsanitized. Thus
calling thermal_hwmon_lookup_by_type() returns no device. And if there is
no device, thermal_remove_hwmon_sysfs() fails with "hwmon device lookup
failed!".

The result is unregisted hwmon devices in the sysfs.

Fixes: 409ef0bacacf ("thermal_hwmon: Sanitize attribute name passed to hwmon")

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_hwmon.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c
index 40c69a533b240..dd5d8ee379287 100644
--- a/drivers/thermal/thermal_hwmon.c
+++ b/drivers/thermal/thermal_hwmon.c
@@ -87,13 +87,17 @@ static struct thermal_hwmon_device *
 thermal_hwmon_lookup_by_type(const struct thermal_zone_device *tz)
 {
 	struct thermal_hwmon_device *hwmon;
+	char type[THERMAL_NAME_LENGTH];
 
 	mutex_lock(&thermal_hwmon_list_lock);
-	list_for_each_entry(hwmon, &thermal_hwmon_list, node)
-		if (!strcmp(hwmon->type, tz->type)) {
+	list_for_each_entry(hwmon, &thermal_hwmon_list, node) {
+		strcpy(type, tz->type);
+		strreplace(type, '-', '_');
+		if (!strcmp(hwmon->type, type)) {
 			mutex_unlock(&thermal_hwmon_list_lock);
 			return hwmon;
 		}
+	}
 	mutex_unlock(&thermal_hwmon_list_lock);
 
 	return NULL;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 115/148] iommu/amd: Fix downgrading default page-sizes in alloc_pte()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (112 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 114/148] thermal_hwmon: Sanitize thermal_zone type Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 116/148] libnvdimm/region: Initialize bad block for volatile namespaces Greg Kroah-Hartman
                   ` (38 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andrei Dulea, Sasha Levin

From: Andrei Dulea <adulea@amazon.de>

[ Upstream commit 6ccb72f8374e17d60b58a7bfd5570496332c54e2 ]

Downgrading an existing large mapping to a mapping using smaller
page-sizes works only for the mappings created with page-mode 7 (i.e.
non-default page size).

Treat large mappings created with page-mode 0 (i.e. default page size)
like a non-present mapping and allow to overwrite it in alloc_pte().

While around, make sure that we flush the TLB only if we change an
existing mapping, otherwise we might end up acting on garbage PTEs.

Fixes: 6d568ef9a622 ("iommu/amd: Allow downgrading page-sizes in alloc_pte()")
Signed-off-by: Andrei Dulea <adulea@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index e1259429ded2f..3b1d7ae6f75e0 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1490,6 +1490,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 		pte_level = PM_PTE_LEVEL(__pte);
 
 		if (!IOMMU_PTE_PRESENT(__pte) ||
+		    pte_level == PAGE_MODE_NONE ||
 		    pte_level == PAGE_MODE_7_LEVEL) {
 			page = (u64 *)get_zeroed_page(gfp);
 			if (!page)
@@ -1500,7 +1501,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 			/* pte could have been changed somewhere. */
 			if (cmpxchg64(pte, __pte, __npte) != __pte)
 				free_page((unsigned long)page);
-			else if (pte_level == PAGE_MODE_7_LEVEL)
+			else if (IOMMU_PTE_PRESENT(__pte))
 				domain->updated = true;
 
 			continue;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 116/148] libnvdimm/region: Initialize bad block for volatile namespaces
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (113 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 115/148] iommu/amd: Fix downgrading default page-sizes in alloc_pte() Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 117/148] libnvdimm: Fix endian conversion issues Greg Kroah-Hartman
                   ` (37 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aneesh Kumar K.V, Dan Williams, Sasha Levin

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

[ Upstream commit c42adf87e4e7ed77f6ffe288dc90f980d07d68df ]

We do check for a bad block during namespace init and that use
region bad block list. We need to initialize the bad block
for volatile regions for this to work. We also observe a lockdep
warning as below because the lock is not initialized correctly
since we skip bad block init for volatile regions.

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc1-15699-g3dee241c937e #149
 Call Trace:
 [c0000000f95cb250] [c00000000147dd84] dump_stack+0xe8/0x164 (unreliable)
 [c0000000f95cb2a0] [c00000000022ccd8] register_lock_class+0x308/0xa60
 [c0000000f95cb3a0] [c000000000229cc0] __lock_acquire+0x170/0x1ff0
 [c0000000f95cb4c0] [c00000000022c740] lock_acquire+0x220/0x270
 [c0000000f95cb580] [c000000000a93230] badblocks_check+0xc0/0x290
 [c0000000f95cb5f0] [c000000000d97540] nd_pfn_validate+0x5c0/0x7f0
 [c0000000f95cb6d0] [c000000000d98300] nd_dax_probe+0xd0/0x1f0
 [c0000000f95cb760] [c000000000d9b66c] nd_pmem_probe+0x10c/0x160
 [c0000000f95cb790] [c000000000d7f5ec] nvdimm_bus_probe+0x10c/0x240
 [c0000000f95cb820] [c000000000d0f844] really_probe+0x254/0x4e0
 [c0000000f95cb8b0] [c000000000d0fdfc] driver_probe_device+0x16c/0x1e0
 [c0000000f95cb930] [c000000000d10238] device_driver_attach+0x68/0xa0
 [c0000000f95cb970] [c000000000d1040c] __driver_attach+0x19c/0x1c0
 [c0000000f95cb9f0] [c000000000d0c4c4] bus_for_each_dev+0x94/0x130
 [c0000000f95cba50] [c000000000d0f014] driver_attach+0x34/0x50
 [c0000000f95cba70] [c000000000d0e208] bus_add_driver+0x178/0x2f0
 [c0000000f95cbb00] [c000000000d117c8] driver_register+0x108/0x170
 [c0000000f95cbb70] [c000000000d7edb0] __nd_driver_register+0xe0/0x100
 [c0000000f95cbbd0] [c000000001a6baa4] nd_pmem_driver_init+0x34/0x48
 [c0000000f95cbbf0] [c0000000000106f4] do_one_initcall+0x1d4/0x4b0
 [c0000000f95cbcd0] [c0000000019f499c] kernel_init_freeable+0x544/0x65c
 [c0000000f95cbdb0] [c000000000010d6c] kernel_init+0x2c/0x180
 [c0000000f95cbe20] [c00000000000b954] ret_from_kernel_thread+0x5c/0x68

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190919083355.26340-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/bus.c         | 2 +-
 drivers/nvdimm/region.c      | 4 ++--
 drivers/nvdimm/region_devs.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index 798c5c4aea9ca..bb3f20ebc276d 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -182,7 +182,7 @@ static int nvdimm_clear_badblocks_region(struct device *dev, void *data)
 	sector_t sector;
 
 	/* make sure device is a region */
-	if (!is_nd_pmem(dev))
+	if (!is_memory(dev))
 		return 0;
 
 	nd_region = to_nd_region(dev);
diff --git a/drivers/nvdimm/region.c b/drivers/nvdimm/region.c
index 37bf8719a2a44..0f6978e72e7cd 100644
--- a/drivers/nvdimm/region.c
+++ b/drivers/nvdimm/region.c
@@ -34,7 +34,7 @@ static int nd_region_probe(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (is_nd_pmem(&nd_region->dev)) {
+	if (is_memory(&nd_region->dev)) {
 		struct resource ndr_res;
 
 		if (devm_init_badblocks(dev, &nd_region->bb))
@@ -123,7 +123,7 @@ static void nd_region_notify(struct device *dev, enum nvdimm_event event)
 		struct nd_region *nd_region = to_nd_region(dev);
 		struct resource res;
 
-		if (is_nd_pmem(&nd_region->dev)) {
+		if (is_memory(&nd_region->dev)) {
 			res.start = nd_region->ndr_start;
 			res.end = nd_region->ndr_start +
 				nd_region->ndr_size - 1;
diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c
index af30cbe7a8ea2..47b48800fb758 100644
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -632,11 +632,11 @@ static umode_t region_visible(struct kobject *kobj, struct attribute *a, int n)
 	if (!is_memory(dev) && a == &dev_attr_dax_seed.attr)
 		return 0;
 
-	if (!is_nd_pmem(dev) && a == &dev_attr_badblocks.attr)
+	if (!is_memory(dev) && a == &dev_attr_badblocks.attr)
 		return 0;
 
 	if (a == &dev_attr_resource.attr) {
-		if (is_nd_pmem(dev))
+		if (is_memory(dev))
 			return 0400;
 		else
 			return 0;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 117/148] libnvdimm: Fix endian conversion issues 
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (114 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 116/148] libnvdimm/region: Initialize bad block for volatile namespaces Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 118/148] fuse: fix memleak in cuse_channel_open Greg Kroah-Hartman
                   ` (36 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Vishal Verma, Aneesh Kumar K.V,
	Dan Williams, Sasha Levin

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

[ Upstream commit 86aa66687442ef45909ff9814b82b4d2bb892294 ]

nd_label->dpa issue was observed when trying to enable the namespace created
with little-endian kernel on a big-endian kernel. That made me run
`sparse` on the rest of the code and other changes are the result of that.

Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing")
Fixes: 9dedc73a4658 ("libnvdimm/btt: Fix LBA masking during 'free list' population")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/btt.c            | 8 ++++----
 drivers/nvdimm/namespace_devs.c | 7 ++++---
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index a8d56887ec881..3e9f45aec8d18 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -392,9 +392,9 @@ static int btt_flog_write(struct arena_info *arena, u32 lane, u32 sub,
 	arena->freelist[lane].sub = 1 - arena->freelist[lane].sub;
 	if (++(arena->freelist[lane].seq) == 4)
 		arena->freelist[lane].seq = 1;
-	if (ent_e_flag(ent->old_map))
+	if (ent_e_flag(le32_to_cpu(ent->old_map)))
 		arena->freelist[lane].has_err = 1;
-	arena->freelist[lane].block = le32_to_cpu(ent_lba(ent->old_map));
+	arena->freelist[lane].block = ent_lba(le32_to_cpu(ent->old_map));
 
 	return ret;
 }
@@ -560,8 +560,8 @@ static int btt_freelist_init(struct arena_info *arena)
 		 * FIXME: if error clearing fails during init, we want to make
 		 * the BTT read-only
 		 */
-		if (ent_e_flag(log_new.old_map) &&
-				!ent_normal(log_new.old_map)) {
+		if (ent_e_flag(le32_to_cpu(log_new.old_map)) &&
+		    !ent_normal(le32_to_cpu(log_new.old_map))) {
 			arena->freelist[i].has_err = 1;
 			ret = arena_clear_freelist_error(arena, i);
 			if (ret)
diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c
index a16e52251a305..102c9d5141ee8 100644
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -1987,7 +1987,7 @@ static struct device *create_namespace_pmem(struct nd_region *nd_region,
 		nd_mapping = &nd_region->mapping[i];
 		label_ent = list_first_entry_or_null(&nd_mapping->labels,
 				typeof(*label_ent), list);
-		label0 = label_ent ? label_ent->label : 0;
+		label0 = label_ent ? label_ent->label : NULL;
 
 		if (!label0) {
 			WARN_ON(1);
@@ -2322,8 +2322,9 @@ static struct device **scan_labels(struct nd_region *nd_region)
 			continue;
 
 		/* skip labels that describe extents outside of the region */
-		if (nd_label->dpa < nd_mapping->start || nd_label->dpa > map_end)
-			continue;
+		if (__le64_to_cpu(nd_label->dpa) < nd_mapping->start ||
+		    __le64_to_cpu(nd_label->dpa) > map_end)
+				continue;
 
 		i = add_namespace_resource(nd_region, nd_label, devs, count);
 		if (i < 0)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 118/148] fuse: fix memleak in cuse_channel_open
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (115 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 117/148] libnvdimm: Fix endian conversion issues Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 119/148] libnvdimm/nfit_test: Fix acpi_handle redefinition Greg Kroah-Hartman
                   ` (35 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hulk Robot, zhengbin, Miklos Szeredi,
	Sasha Levin

From: zhengbin <zhengbin13@huawei.com>

[ Upstream commit 9ad09b1976c562061636ff1e01bfc3a57aebe56b ]

If cuse_send_init fails, need to fuse_conn_put cc->fc.

cuse_channel_open->fuse_conn_init->refcount_set(&fc->count, 1)
                 ->fuse_dev_alloc->fuse_conn_get
                 ->fuse_dev_free->fuse_conn_put

Fixes: cc080e9e9be1 ("fuse: introduce per-instance fuse_dev structure")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/fuse/cuse.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c
index bab7a0db81dd4..f3b7208846506 100644
--- a/fs/fuse/cuse.c
+++ b/fs/fuse/cuse.c
@@ -519,6 +519,7 @@ static int cuse_channel_open(struct inode *inode, struct file *file)
 	rc = cuse_send_init(cc);
 	if (rc) {
 		fuse_dev_free(fud);
+		fuse_conn_put(&cc->fc);
 		return rc;
 	}
 	file->private_data = fud;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 119/148] libnvdimm/nfit_test: Fix acpi_handle redefinition
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (116 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 118/148] fuse: fix memleak in cuse_channel_open Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 120/148] sched/membarrier: Call sync_core only before usermode for same mm Greg Kroah-Hartman
                   ` (34 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nathan Chancellor, Ira Weiny,
	Dan Williams, Sasha Levin

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 59f08896f058a92f03a0041b397a1a227c5e8529 ]

After commit 62974fc389b3 ("libnvdimm: Enable unit test infrastructure
compile checks"), clang warns:

In file included from
../drivers/nvdimm/../../tools/testing/nvdimm/test/iomap.c:15:
../drivers/nvdimm/../../tools/testing/nvdimm/test/nfit_test.h:206:15:
warning: redefinition of typedef 'acpi_handle' is a C11 feature
[-Wtypedef-redefinition]
typedef void *acpi_handle;
              ^
../include/acpi/actypes.h:424:15: note: previous definition is here
typedef void *acpi_handle;      /* Actually a ptr to a NS Node */
              ^
1 warning generated.

The include chain:

iomap.c ->
    linux/acpi.h ->
        acpi/acpi.h ->
            acpi/actypes.h
    nfit_test.h

Avoid this by including linux/acpi.h in nfit_test.h, which allows us to
remove both the typedef and the forward declaration of acpi_object.

Link: https://github.com/ClangBuiltLinux/linux/issues/660
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20190918042148.77553-1-natechancellor@gmail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/nvdimm/test/nfit_test.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/tools/testing/nvdimm/test/nfit_test.h b/tools/testing/nvdimm/test/nfit_test.h
index 448d686da8b13..0bf5640f1f071 100644
--- a/tools/testing/nvdimm/test/nfit_test.h
+++ b/tools/testing/nvdimm/test/nfit_test.h
@@ -4,6 +4,7 @@
  */
 #ifndef __NFIT_TEST_H__
 #define __NFIT_TEST_H__
+#include <linux/acpi.h>
 #include <linux/list.h>
 #include <linux/uuid.h>
 #include <linux/ioport.h>
@@ -202,9 +203,6 @@ struct nd_intel_lss {
 	__u32 status;
 } __packed;
 
-union acpi_object;
-typedef void *acpi_handle;
-
 typedef struct nfit_test_resource *(*nfit_test_lookup_fn)(resource_size_t);
 typedef union acpi_object *(*nfit_test_evaluate_dsm_fn)(acpi_handle handle,
 		 const guid_t *guid, u64 rev, u64 func,
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 120/148] sched/membarrier: Call sync_core only before usermode for same mm
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (117 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 119/148] libnvdimm/nfit_test: Fix acpi_handle redefinition Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 121/148] sched/membarrier: Fix private expedited registration check Greg Kroah-Hartman
                   ` (33 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Oleg Nesterov, Mathieu Desnoyers,
	Peter Zijlstra (Intel),
	Chris Metcalf, Christoph Lameter, Eric W. Biederman,
	Kirill Tkhai, Linus Torvalds, Mike Galbraith, Paul E. McKenney,
	Russell King - ARM Linux admin, Thomas Gleixner, Ingo Molnar,
	Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

[ Upstream commit 2840cf02fae627860156737e83326df354ee4ec6 ]

When the prev and next task's mm change, switch_mm() provides the core
serializing guarantees before returning to usermode. The only case
where an explicit core serialization is needed is when the scheduler
keeps the same mm for prev and next.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-4-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sched/mm.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 4a7944078cc35..8557ec6642130 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -362,6 +362,8 @@ enum {
 
 static inline void membarrier_mm_sync_core_before_usermode(struct mm_struct *mm)
 {
+	if (current->mm != mm)
+		return;
 	if (likely(!(atomic_read(&mm->membarrier_state) &
 		     MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)))
 		return;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 121/148] sched/membarrier: Fix private expedited registration check
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (118 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 120/148] sched/membarrier: Call sync_core only before usermode for same mm Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 122/148] sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() Greg Kroah-Hartman
                   ` (32 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mathieu Desnoyers,
	Peter Zijlstra (Intel),
	Chris Metcalf, Christoph Lameter, Eric W. Biederman,
	Kirill Tkhai, Linus Torvalds, Mike Galbraith, Oleg Nesterov,
	Paul E. McKenney, Russell King - ARM Linux admin,
	Thomas Gleixner, Ingo Molnar, Sasha Levin

From: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>

[ Upstream commit fc0d77387cb5ae883fd774fc559e056a8dde024c ]

Fix a logic flaw in the way membarrier_register_private_expedited()
handles ready state checks for private expedited sync core and private
expedited registrations.

If a private expedited membarrier registration is first performed, and
then a private expedited sync_core registration is performed, the ready
state check will skip the second registration when it really should not.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-2-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/membarrier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/membarrier.c b/kernel/sched/membarrier.c
index aa8d758041088..5110d91b1b0ea 100644
--- a/kernel/sched/membarrier.c
+++ b/kernel/sched/membarrier.c
@@ -226,7 +226,7 @@ static int membarrier_register_private_expedited(int flags)
 	 * groups, which use the same mm. (CLONE_VM but not
 	 * CLONE_THREAD).
 	 */
-	if (atomic_read(&mm->membarrier_state) & state)
+	if ((atomic_read(&mm->membarrier_state) & state) == state)
 		return 0;
 	atomic_or(MEMBARRIER_STATE_PRIVATE_EXPEDITED, &mm->membarrier_state);
 	if (flags & MEMBARRIER_FLAG_SYNC_CORE)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 122/148] sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (119 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 121/148] sched/membarrier: Fix private expedited registration check Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 123/148] perf build: Add detection of java-11-openjdk-devel package Greg Kroah-Hartman
                   ` (31 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, KeMeng Shi, Peter Zijlstra (Intel),
	Valentin Schneider, Linus Torvalds, Thomas Gleixner, Ingo Molnar,
	Sasha Levin

From: KeMeng Shi <shikemeng@huawei.com>

[ Upstream commit 714e501e16cd473538b609b3e351b2cc9f7f09ed ]

An oops can be triggered in the scheduler when running qemu on arm64:

 Unable to handle kernel paging request at virtual address ffff000008effe40
 Internal error: Oops: 96000007 [#1] SMP
 Process migration/0 (pid: 12, stack limit = 0x00000000084e3736)
 pstate: 20000085 (nzCv daIf -PAN -UAO)
 pc : __ll_sc___cmpxchg_case_acq_4+0x4/0x20
 lr : move_queued_task.isra.21+0x124/0x298
 ...
 Call trace:
  __ll_sc___cmpxchg_case_acq_4+0x4/0x20
  __migrate_task+0xc8/0xe0
  migration_cpu_stop+0x170/0x180
  cpu_stopper_thread+0xec/0x178
  smpboot_thread_fn+0x1ac/0x1e8
  kthread+0x134/0x138
  ret_from_fork+0x10/0x18

__set_cpus_allowed_ptr() will choose an active dest_cpu in affinity mask to
migrage the process if process is not currently running on any one of the
CPUs specified in affinity mask. __set_cpus_allowed_ptr() will choose an
invalid dest_cpu (dest_cpu >= nr_cpu_ids, 1024 in my virtual machine) if
CPUS in an affinity mask are deactived by cpu_down after cpumask_intersects
check. cpumask_test_cpu() of dest_cpu afterwards is overflown and may pass if
corresponding bit is coincidentally set. As a consequence, kernel will
access an invalid rq address associate with the invalid CPU in
migration_cpu_stop->__migrate_task->move_queued_task and the Oops occurs.

The reproduce the crash:

  1) A process repeatedly binds itself to cpu0 and cpu1 in turn by calling
  sched_setaffinity.

  2) A shell script repeatedly does "echo 0 > /sys/devices/system/cpu/cpu1/online"
  and "echo 1 > /sys/devices/system/cpu/cpu1/online" in turn.

  3) Oops appears if the invalid CPU is set in memory after tested cpumask.

Signed-off-by: KeMeng Shi <shikemeng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1568616808-16808-1-git-send-email-shikemeng@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index d38f007afea74..fffe790d98bb2 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1537,7 +1537,8 @@ static int __set_cpus_allowed_ptr(struct task_struct *p,
 	if (cpumask_equal(p->cpus_ptr, new_mask))
 		goto out;
 
-	if (!cpumask_intersects(new_mask, cpu_valid_mask)) {
+	dest_cpu = cpumask_any_and(cpu_valid_mask, new_mask);
+	if (dest_cpu >= nr_cpu_ids) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1558,7 +1559,6 @@ static int __set_cpus_allowed_ptr(struct task_struct *p,
 	if (cpumask_test_cpu(task_cpu(p), new_mask))
 		goto out;
 
-	dest_cpu = cpumask_any_and(cpu_valid_mask, new_mask);
 	if (task_running(rq, p) || p->state == TASK_WAKING) {
 		struct migration_arg arg = { p, dest_cpu };
 		/* Need help from migration thread: drop lock and wait. */
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 123/148] perf build: Add detection of java-11-openjdk-devel package
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (120 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 122/148] sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 124/148] include/trace/events/writeback.h: fix -Wstringop-truncation warnings Greg Kroah-Hartman
                   ` (30 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andreas Krebbel, Thomas Richter,
	Arnaldo Carvalho de Melo, Heiko Carstens, Hendrik Brueckner,
	Vasily Gorbik, Sasha Levin

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 815c1560bf8fd522b8d93a1d727868b910c1cc24 ]

With Java 11 there is no seperate JRE anymore.

Details:

  https://coderanch.com/t/701603/java/JRE-JDK

Therefore the detection of the JRE needs to be adapted.

This change works for s390 and x86.  I have not tested other platforms.

Committer testing:

Continues to work with the OpenJDK 8:

  $ rm -f ~acme/lib64/libperf-jvmti.so
  $ rpm -qa | grep jdk-devel
  java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
  $ git log --oneline -1
  a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
  $ ls -la ~acme/lib64/libperf-jvmti.so
  -rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
  $

Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/Makefile.config | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 89ac5a1f1550e..3da3749118527 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -908,7 +908,7 @@ ifndef NO_JVMTI
     JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
   else
     ifneq (,$(wildcard /usr/sbin/alternatives))
-      JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed 's%/jre/bin/java.%%g')
+      JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
     endif
   endif
   ifndef JDIR
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 124/148] include/trace/events/writeback.h: fix -Wstringop-truncation warnings
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (121 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 123/148] perf build: Add detection of java-11-openjdk-devel package Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 125/148] selftests/bpf: adjust strobemeta loop to satisfy latest clang Greg Kroah-Hartman
                   ` (29 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Qian Cai, Jan Kara, Tobin C. Harding,
	Steven Rostedt (VMware),
	Ingo Molnar, Tejun Heo, Dave Chinner, Fengguang Wu, Jens Axboe,
	Joe Perches, Kees Cook, Jann Horn, Jonathan Corbet, Nitin Gote,
	Rasmus Villemoes, Stephen Kitt, Andrew Morton, Linus Torvalds,
	Sasha Levin

From: Qian Cai <cai@lca.pw>

[ Upstream commit d1a445d3b86c9341ce7a0954c23be0edb5c9bec5 ]

There are many of those warnings.

In file included from ./arch/powerpc/include/asm/paca.h:15,
                 from ./arch/powerpc/include/asm/current.h:13,
                 from ./include/linux/thread_info.h:21,
                 from ./include/asm-generic/preempt.h:5,
                 from ./arch/powerpc/include/generated/asm/preempt.h:1,
                 from ./include/linux/preempt.h:78,
                 from ./include/linux/spinlock.h:51,
                 from fs/fs-writeback.c:19:
In function 'strncpy',
    inlined from 'perf_trace_writeback_page_template' at
./include/trace/events/writeback.h:56:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified
bound 32 equals destination size [-Wstringop-truncation]
  return __builtin_strncpy(p, q, size);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix it by using the new strscpy_pad() which was introduced in "lib/string:
Add strscpy_pad() function" and will always be NUL-terminated instead of
strncpy().  Also, change strlcpy() to use strscpy_pad() in this file for
consistency.

Link: http://lkml.kernel.org/r/1564075099-27750-1-git-send-email-cai@lca.pw
Fixes: 455b2864686d ("writeback: Initial tracing support")
Fixes: 028c2dd184c0 ("writeback: Add tracing to balance_dirty_pages")
Fixes: e84d0a4f8e39 ("writeback: trace event writeback_queue_io")
Fixes: b48c104d2211 ("writeback: trace event bdi_dirty_ratelimit")
Fixes: cc1676d917f3 ("writeback: Move requeueing when I_SYNC set to writeback_sb_inodes()")
Fixes: 9fb0a7da0c52 ("writeback: add more tracepoints")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Nitin Gote <nitin.r.gote@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Stephen Kitt <steve@sk2.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/writeback.h | 38 +++++++++++++++++---------------
 1 file changed, 20 insertions(+), 18 deletions(-)

diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index aa7f3aeac7408..79095434c1be3 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -66,8 +66,9 @@ DECLARE_EVENT_CLASS(writeback_page_template,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name,
-			mapping ? dev_name(inode_to_bdi(mapping->host)->dev) : "(unknown)", 32);
+		strscpy_pad(__entry->name,
+			    mapping ? dev_name(inode_to_bdi(mapping->host)->dev) : "(unknown)",
+			    32);
 		__entry->ino = mapping ? mapping->host->i_ino : 0;
 		__entry->index = page->index;
 	),
@@ -110,8 +111,8 @@ DECLARE_EVENT_CLASS(writeback_dirty_inode_template,
 		struct backing_dev_info *bdi = inode_to_bdi(inode);
 
 		/* may be called for files on pseudo FSes w/ unregistered bdi */
-		strncpy(__entry->name,
-			bdi->dev ? dev_name(bdi->dev) : "(unknown)", 32);
+		strscpy_pad(__entry->name,
+			    bdi->dev ? dev_name(bdi->dev) : "(unknown)", 32);
 		__entry->ino		= inode->i_ino;
 		__entry->state		= inode->i_state;
 		__entry->flags		= flags;
@@ -190,8 +191,8 @@ DECLARE_EVENT_CLASS(writeback_write_inode_template,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name,
-			dev_name(inode_to_bdi(inode)->dev), 32);
+		strscpy_pad(__entry->name,
+			    dev_name(inode_to_bdi(inode)->dev), 32);
 		__entry->ino		= inode->i_ino;
 		__entry->sync_mode	= wbc->sync_mode;
 		__entry->cgroup_ino	= __trace_wbc_assign_cgroup(wbc);
@@ -234,8 +235,9 @@ DECLARE_EVENT_CLASS(writeback_work_class,
 		__field(unsigned int, cgroup_ino)
 	),
 	TP_fast_assign(
-		strncpy(__entry->name,
-			wb->bdi->dev ? dev_name(wb->bdi->dev) : "(unknown)", 32);
+		strscpy_pad(__entry->name,
+			    wb->bdi->dev ? dev_name(wb->bdi->dev) :
+			    "(unknown)", 32);
 		__entry->nr_pages = work->nr_pages;
 		__entry->sb_dev = work->sb ? work->sb->s_dev : 0;
 		__entry->sync_mode = work->sync_mode;
@@ -288,7 +290,7 @@ DECLARE_EVENT_CLASS(writeback_class,
 		__field(unsigned int, cgroup_ino)
 	),
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(wb->bdi->dev), 32);
+		strscpy_pad(__entry->name, dev_name(wb->bdi->dev), 32);
 		__entry->cgroup_ino = __trace_wb_assign_cgroup(wb);
 	),
 	TP_printk("bdi %s: cgroup_ino=%u",
@@ -310,7 +312,7 @@ TRACE_EVENT(writeback_bdi_register,
 		__array(char, name, 32)
 	),
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strscpy_pad(__entry->name, dev_name(bdi->dev), 32);
 	),
 	TP_printk("bdi %s",
 		__entry->name
@@ -335,7 +337,7 @@ DECLARE_EVENT_CLASS(wbc_class,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name, dev_name(bdi->dev), 32);
+		strscpy_pad(__entry->name, dev_name(bdi->dev), 32);
 		__entry->nr_to_write	= wbc->nr_to_write;
 		__entry->pages_skipped	= wbc->pages_skipped;
 		__entry->sync_mode	= wbc->sync_mode;
@@ -386,7 +388,7 @@ TRACE_EVENT(writeback_queue_io,
 	),
 	TP_fast_assign(
 		unsigned long *older_than_this = work->older_than_this;
-		strncpy(__entry->name, dev_name(wb->bdi->dev), 32);
+		strscpy_pad(__entry->name, dev_name(wb->bdi->dev), 32);
 		__entry->older	= older_than_this ?  *older_than_this : 0;
 		__entry->age	= older_than_this ?
 				  (jiffies - *older_than_this) * 1000 / HZ : -1;
@@ -472,7 +474,7 @@ TRACE_EVENT(bdi_dirty_ratelimit,
 	),
 
 	TP_fast_assign(
-		strlcpy(__entry->bdi, dev_name(wb->bdi->dev), 32);
+		strscpy_pad(__entry->bdi, dev_name(wb->bdi->dev), 32);
 		__entry->write_bw	= KBps(wb->write_bandwidth);
 		__entry->avg_write_bw	= KBps(wb->avg_write_bandwidth);
 		__entry->dirty_rate	= KBps(dirty_rate);
@@ -537,7 +539,7 @@ TRACE_EVENT(balance_dirty_pages,
 
 	TP_fast_assign(
 		unsigned long freerun = (thresh + bg_thresh) / 2;
-		strlcpy(__entry->bdi, dev_name(wb->bdi->dev), 32);
+		strscpy_pad(__entry->bdi, dev_name(wb->bdi->dev), 32);
 
 		__entry->limit		= global_wb_domain.dirty_limit;
 		__entry->setpoint	= (global_wb_domain.dirty_limit +
@@ -597,8 +599,8 @@ TRACE_EVENT(writeback_sb_inodes_requeue,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name,
-		        dev_name(inode_to_bdi(inode)->dev), 32);
+		strscpy_pad(__entry->name,
+			    dev_name(inode_to_bdi(inode)->dev), 32);
 		__entry->ino		= inode->i_ino;
 		__entry->state		= inode->i_state;
 		__entry->dirtied_when	= inode->dirtied_when;
@@ -671,8 +673,8 @@ DECLARE_EVENT_CLASS(writeback_single_inode_template,
 	),
 
 	TP_fast_assign(
-		strncpy(__entry->name,
-			dev_name(inode_to_bdi(inode)->dev), 32);
+		strscpy_pad(__entry->name,
+			    dev_name(inode_to_bdi(inode)->dev), 32);
 		__entry->ino		= inode->i_ino;
 		__entry->state		= inode->i_state;
 		__entry->dirtied_when	= inode->dirtied_when;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 125/148] selftests/bpf: adjust strobemeta loop to satisfy latest clang
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (122 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 124/148] include/trace/events/writeback.h: fix -Wstringop-truncation warnings Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 126/148] kernel/elfcore.c: include proper prototypes Greg Kroah-Hartman
                   ` (28 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexei Starovoitov, Andrii Nakryiko,
	Daniel Borkmann, Sasha Levin

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 4670d68b9254710fdeaf794cad54d8b2c9929e0a ]

Some recent changes in latest Clang started causing the following
warning when unrolling strobemeta test case main loop:

  progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was
  unable to perform the requested transformation; the transformation might
  be disabled or specified as part of an unsupported transformation
  ordering [-Wpass-failed=transform-warning]

This patch simplifies loop's exit condition to depend only on constant
max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early
termination logic inside the loop body. The changes are equivalent from
program logic standpoint, but fixes the warning. It also appears to
improve generated BPF code, as it fixes previously failing non-unrolled
strobemeta test cases.

Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/strobemeta.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/progs/strobemeta.h b/tools/testing/selftests/bpf/progs/strobemeta.h
index 8a399bdfd9203..067eb625d01c5 100644
--- a/tools/testing/selftests/bpf/progs/strobemeta.h
+++ b/tools/testing/selftests/bpf/progs/strobemeta.h
@@ -413,7 +413,10 @@ static __always_inline void *read_map_var(struct strobemeta_cfg *cfg,
 #else
 #pragma unroll
 #endif
-	for (int i = 0; i < STROBE_MAX_MAP_ENTRIES && i < map.cnt; ++i) {
+	for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
+		if (i >= map.cnt)
+			break;
+
 		descr->key_lens[i] = 0;
 		len = bpf_probe_read_str(payload, STROBE_MAX_STR_LEN,
 					 map.entries[i].key);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 126/148] kernel/elfcore.c: include proper prototypes
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (123 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 125/148] selftests/bpf: adjust strobemeta loop to satisfy latest clang Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 127/148] libbpf: fix false uninitialized variable warning Greg Kroah-Hartman
                   ` (27 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Valdis Kletnieks, Andrew Morton,
	Linus Torvalds, Sasha Levin

From: Valdis Kletnieks <valdis.kletnieks@vt.edu>

[ Upstream commit 0f74914071ab7e7b78731ed62bf350e3a344e0a5 ]

When building with W=1, gcc properly complains that there's no prototypes:

  CC      kernel/elfcore.o
kernel/elfcore.c:7:17: warning: no previous prototype for 'elf_core_extra_phdrs' [-Wmissing-prototypes]
    7 | Elf_Half __weak elf_core_extra_phdrs(void)
      |                 ^~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:12:12: warning: no previous prototype for 'elf_core_write_extra_phdrs' [-Wmissing-prototypes]
   12 | int __weak elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:17:12: warning: no previous prototype for 'elf_core_write_extra_data' [-Wmissing-prototypes]
   17 | int __weak elf_core_write_extra_data(struct coredump_params *cprm)
      |            ^~~~~~~~~~~~~~~~~~~~~~~~~
kernel/elfcore.c:22:15: warning: no previous prototype for 'elf_core_extra_data_size' [-Wmissing-prototypes]
   22 | size_t __weak elf_core_extra_data_size(void)
      |               ^~~~~~~~~~~~~~~~~~~~~~~~

Provide the include file so gcc is happy, and we don't have potential code drift

Link: http://lkml.kernel.org/r/29875.1565224705@turing-police
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/elfcore.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/elfcore.c b/kernel/elfcore.c
index fc482c8e0bd88..57fb4dcff4349 100644
--- a/kernel/elfcore.c
+++ b/kernel/elfcore.c
@@ -3,6 +3,7 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/binfmts.h>
+#include <linux/elfcore.h>
 
 Elf_Half __weak elf_core_extra_phdrs(void)
 {
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 127/148] libbpf: fix false uninitialized variable warning
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (124 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 126/148] kernel/elfcore.c: include proper prototypes Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 128/148] blk-mq: move lockdep_assert_held() into elevator_exit Greg Kroah-Hartman
                   ` (26 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrii Nakryiko, Daniel Borkmann,
	Sasha Levin

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit aef70a1f44c0b570e6345c02c2d240471859f0a4 ]

Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf_dump.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index 7065bb5b27525..e1357dbb16c24 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -1213,6 +1213,7 @@ static void btf_dump_emit_type_chain(struct btf_dump *d,
 				return;
 			}
 
+			next_id = decls->ids[decls->cnt - 1];
 			next_t = btf__type_by_id(d->btf, next_id);
 			multidim = btf_kind_of(next_t) == BTF_KIND_ARRAY;
 			/* we need space if we have named non-pointer */
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 128/148] blk-mq: move lockdep_assert_held() into elevator_exit
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (125 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 127/148] libbpf: fix false uninitialized variable warning Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 129/148] bpf: Fix bpf_event_output re-entry issue Greg Kroah-Hartman
                   ` (25 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, syzbot+da3b7677bb913dc1b737,
	Bart Van Assche, Damien Le Moal, Ming Lei, Jens Axboe,
	Sasha Levin

From: Ming Lei <ming.lei@redhat.com>

[ Upstream commit 284b94be1925dbe035ce5218d8b5c197321262c7 ]

Commit c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq")
removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with
lockdep_assert_held() called in blk_mq_sched_free_requests() which is
run in failure path of elevator_init_mq().

blk_mq_sched_free_requests() is called in the following 3 functions:

	elevator_init_mq()
	elevator_exit()
	blk_cleanup_queue()

In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly
by 'mutex_lock(&q->sysfs_lock)'.

So moving the lockdep_assert_held() from blk_mq_sched_free_requests()
into elevator_exit() for fixing the report by syzbot.

Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com
Fixed: c48dac137a62 ("block: don't hold q->sysfs_lock in elevator_init_mq")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq-sched.c | 2 --
 block/blk.h          | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/block/blk-mq-sched.c b/block/blk-mq-sched.c
index c9d183d6c4999..ca22afd47b3dc 100644
--- a/block/blk-mq-sched.c
+++ b/block/blk-mq-sched.c
@@ -555,8 +555,6 @@ void blk_mq_sched_free_requests(struct request_queue *q)
 	struct blk_mq_hw_ctx *hctx;
 	int i;
 
-	lockdep_assert_held(&q->sysfs_lock);
-
 	queue_for_each_hw_ctx(q, hctx, i) {
 		if (hctx->sched_tags)
 			blk_mq_free_rqs(q->tag_set, hctx->sched_tags, i);
diff --git a/block/blk.h b/block/blk.h
index d5edfd73d45ea..0685c45e3d96e 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -201,6 +201,8 @@ void elv_unregister_queue(struct request_queue *q);
 static inline void elevator_exit(struct request_queue *q,
 		struct elevator_queue *e)
 {
+	lockdep_assert_held(&q->sysfs_lock);
+
 	blk_mq_sched_free_requests(q);
 	__elevator_exit(q, e);
 }
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 129/148] bpf: Fix bpf_event_output re-entry issue
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (126 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 128/148] blk-mq: move lockdep_assert_held() into elevator_exit Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 130/148] net: dsa: microchip: Always set regmap stride to 1 Greg Kroah-Hartman
                   ` (24 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Allan Zhang, Daniel Borkmann,
	Stanislav Fomichev, Eric Dumazet, John Fastabend, Sasha Levin

From: Allan Zhang <allanzhang@google.com>

[ Upstream commit 768fb61fcc13b2acaca758275d54c09a65e2968b ]

BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it
can be called from atomic and non-atomic contexts since we don't have
bpf_prog_active to prevent it happen.

This patch enables 3 levels of nesting to support normal, irq and nmi
context.

We can easily reproduce the issue by running netperf crr mode with 100
flows and 10 threads from netperf client side.

Here is the whole stack dump:

[  515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
[  515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G        W        4.15.0-smp-fixpanic #44
[  515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
[  515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[  515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246
[  515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000
[  515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80
[  515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012
[  515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002
[  515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0
[  515.228910] FS:  00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000
[  515.228910] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0
[  515.228911] Call Trace:
[  515.228913]  <IRQ>
[  515.228919]  [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50
[  515.228923]  [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[  515.228927]  [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[  515.228930]  [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150
[  515.228933]  [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110
[  515.228936]  [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010
[  515.228939]  [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0
[  515.228942]  [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0
[  515.228945]  [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460
[  515.228947]  [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30
[  515.228951]  [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220
[  515.228955]  [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450
[  515.228958]  [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170
[  515.228961]  [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450
[  515.228963]  [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0
[  515.228966]  [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330
[  515.228969]  [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0
[  515.228972]  [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70
[  515.228975]  [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150
[  515.228978]  [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410
[  515.228982]  [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305
[  515.228986]  [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0
[  515.228989]  [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120
[  515.228991]  [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90
[  515.228992]  </IRQ>
[  515.228996]  [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20
[  515.229000]  [<ffffffff8259c040>] ? console_unlock+0x230/0x490
[  515.229003]  [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0
[  515.229006]  [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30
[  515.229008]  [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70
[  515.229011]  [<ffffffff8259d4bb>] ? printk+0x50/0x66
[  515.229013]  [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220
[  515.229016]  [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50
[  515.229019]  [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[  515.229023]  [<ffffffff82c29e87>] ? release_sock+0x97/0xb0
[  515.229026]  [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0
[  515.229029]  [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[  515.229032]  [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0
[  515.229035]  [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600
[  515.229038]  [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460
[  515.229040]  [<ffffffff82d21082>] ? inet_release+0x42/0x70
[  515.229043]  [<ffffffff82d58809>] ? inet6_release+0x39/0x50
[  515.229046]  [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0
[  515.229049]  [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20
[  515.229052]  [<ffffffff8273b517>] ? __fput+0xe7/0x1f0
[  515.229055]  [<ffffffff8273b66e>] ? ____fput+0xe/0x10
[  515.229058]  [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0
[  515.229061]  [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f
[  515.229064]  [<ffffffff82408171>] ? do_syscall_64+0x111/0x130
[  515.229067]  [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
Signed-off-by: Allan Zhang <allanzhang@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20190925234312.94063-2-allanzhang@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/bpf_trace.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index ca1255d145766..3e38a010003c9 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -500,14 +500,17 @@ static const struct bpf_func_proto bpf_perf_event_output_proto = {
 	.arg5_type	= ARG_CONST_SIZE_OR_ZERO,
 };
 
-static DEFINE_PER_CPU(struct pt_regs, bpf_pt_regs);
-static DEFINE_PER_CPU(struct perf_sample_data, bpf_misc_sd);
+static DEFINE_PER_CPU(int, bpf_event_output_nest_level);
+struct bpf_nested_pt_regs {
+	struct pt_regs regs[3];
+};
+static DEFINE_PER_CPU(struct bpf_nested_pt_regs, bpf_pt_regs);
+static DEFINE_PER_CPU(struct bpf_trace_sample_data, bpf_misc_sds);
 
 u64 bpf_event_output(struct bpf_map *map, u64 flags, void *meta, u64 meta_size,
 		     void *ctx, u64 ctx_size, bpf_ctx_copy_t ctx_copy)
 {
-	struct perf_sample_data *sd = this_cpu_ptr(&bpf_misc_sd);
-	struct pt_regs *regs = this_cpu_ptr(&bpf_pt_regs);
+	int nest_level = this_cpu_inc_return(bpf_event_output_nest_level);
 	struct perf_raw_frag frag = {
 		.copy		= ctx_copy,
 		.size		= ctx_size,
@@ -522,12 +525,25 @@ u64 bpf_event_output(struct bpf_map *map, u64 flags, void *meta, u64 meta_size,
 			.data	= meta,
 		},
 	};
+	struct perf_sample_data *sd;
+	struct pt_regs *regs;
+	u64 ret;
+
+	if (WARN_ON_ONCE(nest_level > ARRAY_SIZE(bpf_misc_sds.sds))) {
+		ret = -EBUSY;
+		goto out;
+	}
+	sd = this_cpu_ptr(&bpf_misc_sds.sds[nest_level - 1]);
+	regs = this_cpu_ptr(&bpf_pt_regs.regs[nest_level - 1]);
 
 	perf_fetch_caller_regs(regs);
 	perf_sample_data_init(sd, 0, 0);
 	sd->raw = &raw;
 
-	return __bpf_perf_event_output(regs, map, flags, sd);
+	ret = __bpf_perf_event_output(regs, map, flags, sd);
+out:
+	this_cpu_dec(bpf_event_output_nest_level);
+	return ret;
 }
 
 BPF_CALL_0(bpf_get_current_task)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 130/148] net: dsa: microchip: Always set regmap stride to 1
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (127 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 129/148] bpf: Fix bpf_event_output re-entry issue Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 131/148] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630 Greg Kroah-Hartman
                   ` (23 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Vasut, Andrew Lunn,
	David S. Miller, Florian Fainelli, George McCollister,
	Tristram Ha, Vivien Didelot, Woojung Huh, Sasha Levin

From: Marek Vasut <marex@denx.de>

[ Upstream commit a3aa6e65beebf3780026753ebf39db19f4c92990 ]

The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.

This patch fixes MIB counter access on KSZ87xx.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Fixes: 46558d601cb6 ("net: dsa: microchip: Initial SPI regmap support")
Fixes: 255b59ad0db2 ("net: dsa: microchip: Factor out regmap config generation into common header")
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/dsa/microchip/ksz_common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 72ec250b95408..823f544add0a3 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -130,7 +130,7 @@ static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
 	{								\
 		.name = #width,						\
 		.val_bits = (width),					\
-		.reg_stride = (width) / 8,				\
+		.reg_stride = 1,					\
 		.reg_bits = (regbits) + (regalign),			\
 		.pad_bits = (regpad),					\
 		.max_register = BIT(regbits) - 1,			\
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 131/148] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (128 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 130/148] net: dsa: microchip: Always set regmap stride to 1 Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 132/148] perf unwind: Fix libunwind build failure on i386 systems Greg Kroah-Hartman
                   ` (22 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Lee Jones, Bjorn Andersson,
	Wolfram Sang, Sasha Levin

From: Lee Jones <lee.jones@linaro.org>

[ Upstream commit 127068abe85bf3dee50df51cb039a5a987a4a666 ]

We have a production-level laptop (Lenovo Yoga C630) which is exhibiting
a rather horrific bug.  When I2C HID devices are being scanned for at
boot-time the QCom Geni based I2C (Serial Engine) attempts to use DMA.
When it does, the laptop reboots and the user never sees the OS.

Attempts are being made to debug the reason for the spontaneous reboot.
No luck so far, hence the requirement for this hot-fix.  This workaround
will be removed once we have a viable fix.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index a89bfce5388ee..17abf60c94aeb 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -355,11 +355,13 @@ static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 {
 	dma_addr_t rx_dma;
 	unsigned long time_left;
-	void *dma_buf;
+	void *dma_buf = NULL;
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+
 	if (dma_buf)
 		geni_se_select_mode(se, GENI_SE_DMA);
 	else
@@ -394,11 +396,13 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
 {
 	dma_addr_t tx_dma;
 	unsigned long time_left;
-	void *dma_buf;
+	void *dma_buf = NULL;
 	struct geni_se *se = &gi2c->se;
 	size_t len = msg->len;
 
-	dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+	if (!of_machine_is_compatible("lenovo,yoga-c630"))
+		dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
+
 	if (dma_buf)
 		geni_se_select_mode(se, GENI_SE_DMA);
 	else
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 132/148] perf unwind: Fix libunwind build failure on i386 systems
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (129 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 131/148] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630 Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 133/148] mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Greg Kroah-Hartman
                   ` (21 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Naresh Kamboju,
	Arnaldo Carvalho de Melo, David Ahern, Jiri Olsa, Linus Torvalds,
	Namhyung Kim, Peter Zijlstra, Thomas Gleixner, Ingo Molnar,
	Sasha Levin

From: Arnaldo Carvalho de Melo <acme@redhat.com>

[ Upstream commit 26acf400d2dcc72c7e713e1f55db47ad92010cc2 ]

Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:

  perf-in.o: In function `libunwind__x86_reg_id':
  tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
  undefined reference to `pr_err'

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/unwind-libunwind.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/arch/x86/util/unwind-libunwind.c b/tools/perf/arch/x86/util/unwind-libunwind.c
index 05920e3edf7a7..47357973b55b2 100644
--- a/tools/perf/arch/x86/util/unwind-libunwind.c
+++ b/tools/perf/arch/x86/util/unwind-libunwind.c
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <errno.h>
+#include "../../util/debug.h"
 #ifndef REMOTE_UNWIND_LIBUNWIND
 #include <libunwind.h>
 #include "perf_regs.h"
 #include "../../util/unwind.h"
-#include "../../util/debug.h"
 #endif
 
 #ifdef HAVE_ARCH_X86_64_SUPPORT
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 133/148] mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (130 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 132/148] perf unwind: Fix libunwind build failure on i386 systems Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 134/148] nfp: abm: fix memory leak in nfp_abm_u32_knode_replace Greg Kroah-Hartman
                   ` (20 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Danielle Ratson, Jiri Pirko,
	Ido Schimmel, David S. Miller, Sasha Levin

From: Danielle Ratson <danieller@mellanox.com>

[ Upstream commit 52feb8b588f6d23673dd7cc2b44b203493b627f6 ]

The ASIC can only mirror a packet to one port, but when user is trying
to set more than one mirror action, it doesn't fail.

Add a check if more than one mirror action was specified per rule and if so,
fail for not being supported.

Fixes: d0d13c1858a11 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
index 202e9a2460194..7c13656a83384 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_flower.c
@@ -21,6 +21,7 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 					 struct netlink_ext_ack *extack)
 {
 	const struct flow_action_entry *act;
+	int mirror_act_count = 0;
 	int err, i;
 
 	if (!flow_action_has_entries(flow_action))
@@ -95,6 +96,11 @@ static int mlxsw_sp_flower_parse_actions(struct mlxsw_sp *mlxsw_sp,
 		case FLOW_ACTION_MIRRED: {
 			struct net_device *out_dev = act->dev;
 
+			if (mirror_act_count++) {
+				NL_SET_ERR_MSG_MOD(extack, "Multiple mirror actions per rule are not supported");
+				return -EOPNOTSUPP;
+			}
+
 			err = mlxsw_sp_acl_rulei_act_mirror(mlxsw_sp, rulei,
 							    block, out_dev,
 							    extack);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 134/148] nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (131 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 133/148] mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 135/148] drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed Greg Kroah-Hartman
                   ` (19 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Navid Emamdoost, David S. Miller,
	Sasha Levin

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 78beef629fd95be4ed853b2d37b832f766bd96ca ]

In nfp_abm_u32_knode_replace if the allocation for match fails it should
go to the error handling instead of returning. Updated other gotos to
have correct errno returned, too.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/netronome/nfp/abm/cls.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/abm/cls.c b/drivers/net/ethernet/netronome/nfp/abm/cls.c
index 23ebddfb95325..9f8a1f69c0c4c 100644
--- a/drivers/net/ethernet/netronome/nfp/abm/cls.c
+++ b/drivers/net/ethernet/netronome/nfp/abm/cls.c
@@ -176,8 +176,10 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink,
 	u8 mask, val;
 	int err;
 
-	if (!nfp_abm_u32_check_knode(alink->abm, knode, proto, extack))
+	if (!nfp_abm_u32_check_knode(alink->abm, knode, proto, extack)) {
+		err = -EOPNOTSUPP;
 		goto err_delete;
+	}
 
 	tos_off = proto == htons(ETH_P_IP) ? 16 : 20;
 
@@ -198,14 +200,18 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink,
 		if ((iter->val & cmask) == (val & cmask) &&
 		    iter->band != knode->res->classid) {
 			NL_SET_ERR_MSG_MOD(extack, "conflict with already offloaded filter");
+			err = -EOPNOTSUPP;
 			goto err_delete;
 		}
 	}
 
 	if (!match) {
 		match = kzalloc(sizeof(*match), GFP_KERNEL);
-		if (!match)
-			return -ENOMEM;
+		if (!match) {
+			err = -ENOMEM;
+			goto err_delete;
+		}
+
 		list_add(&match->list, &alink->dscp_map);
 	}
 	match->handle = knode->handle;
@@ -221,7 +227,7 @@ nfp_abm_u32_knode_replace(struct nfp_abm_link *alink,
 
 err_delete:
 	nfp_abm_u32_knode_delete(alink, knode);
-	return -EOPNOTSUPP;
+	return err;
 }
 
 static int nfp_abm_setup_tc_block_cb(enum tc_setup_type type,
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 135/148] drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (132 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 134/148] nfp: abm: fix memory leak in nfp_abm_u32_knode_replace Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 136/148] Btrfs: fix selftests failure due to uninitialized i_mode in test inodes Greg Kroah-Hartman
                   ` (18 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Michel Dänzer, Hans de Goede,
	Alex Deucher, Sasha Levin

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 9dbc88d013b79c62bd845cb9e7c0256e660967c5 ]

Bail from the pci_driver probe function instead of from the drm_driver
load function.

This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.

Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59

Note that despite that being an userspace bug, not sending unnecessary
udev events is a good idea in general.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 31 +++++++++++++++++++++++++++++
 drivers/gpu/drm/radeon/radeon_kms.c | 25 -----------------------
 2 files changed, 31 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 15d7bebe17294..5cc0fbb04ab14 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -325,8 +325,39 @@ bool radeon_device_is_virtual(void);
 static int radeon_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *ent)
 {
+	unsigned long flags = 0;
 	int ret;
 
+	if (!ent)
+		return -ENODEV; /* Avoid NULL-ptr deref in drm_get_pci_dev */
+
+	flags = ent->driver_data;
+
+	if (!radeon_si_support) {
+		switch (flags & RADEON_FAMILY_MASK) {
+		case CHIP_TAHITI:
+		case CHIP_PITCAIRN:
+		case CHIP_VERDE:
+		case CHIP_OLAND:
+		case CHIP_HAINAN:
+			dev_info(&pdev->dev,
+				 "SI support disabled by module param\n");
+			return -ENODEV;
+		}
+	}
+	if (!radeon_cik_support) {
+		switch (flags & RADEON_FAMILY_MASK) {
+		case CHIP_KAVERI:
+		case CHIP_BONAIRE:
+		case CHIP_HAWAII:
+		case CHIP_KABINI:
+		case CHIP_MULLINS:
+			dev_info(&pdev->dev,
+				 "CIK support disabled by module param\n");
+			return -ENODEV;
+		}
+	}
+
 	if (vga_switcheroo_client_probe_defer(pdev))
 		return -EPROBE_DEFER;
 
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 07f7ace42c4ba..e85c554eeaa94 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -100,31 +100,6 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	struct radeon_device *rdev;
 	int r, acpi_status;
 
-	if (!radeon_si_support) {
-		switch (flags & RADEON_FAMILY_MASK) {
-		case CHIP_TAHITI:
-		case CHIP_PITCAIRN:
-		case CHIP_VERDE:
-		case CHIP_OLAND:
-		case CHIP_HAINAN:
-			dev_info(dev->dev,
-				 "SI support disabled by module param\n");
-			return -ENODEV;
-		}
-	}
-	if (!radeon_cik_support) {
-		switch (flags & RADEON_FAMILY_MASK) {
-		case CHIP_KAVERI:
-		case CHIP_BONAIRE:
-		case CHIP_HAWAII:
-		case CHIP_KABINI:
-		case CHIP_MULLINS:
-			dev_info(dev->dev,
-				 "CIK support disabled by module param\n");
-			return -ENODEV;
-		}
-	}
-
 	rdev = kzalloc(sizeof(struct radeon_device), GFP_KERNEL);
 	if (rdev == NULL) {
 		return -ENOMEM;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 136/148] Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (133 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 135/148] drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 137/148] KVM: nVMX: Fix consistency check on injected exception error code Greg Kroah-Hartman
                   ` (17 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Filipe Manana, Qu Wenruo,
	David Sterba, Sasha Levin

From: Filipe Manana <fdmanana@suse.com>

[ Upstream commit 9f7fec0ba89108b9385f1b9fb167861224912a4a ]

Some of the self tests create a test inode, setup some extents and then do
calls to btrfs_get_extent() to test that the corresponding extent maps
exist and are correct. However btrfs_get_extent(), since the 5.2 merge
window, now errors out when it finds a regular or prealloc extent for an
inode that does not correspond to a regular file (its ->i_mode is not
S_IFREG). This causes the self tests to fail sometimes, specially when
KASAN, slub_debug and page poisoning are enabled:

  $ modprobe btrfs
  modprobe: ERROR: could not insert 'btrfs': Invalid argument

  $ dmesg
  [ 9414.691648] Btrfs loaded, crc32c=crc32c-intel, debug=on, assert=on, integrity-checker=on, ref-verify=on
  [ 9414.692655] BTRFS: selftest: sectorsize: 4096  nodesize: 4096
  [ 9414.692658] BTRFS: selftest: running btrfs free space cache tests
  [ 9414.692918] BTRFS: selftest: running extent only tests
  [ 9414.693061] BTRFS: selftest: running bitmap only tests
  [ 9414.693366] BTRFS: selftest: running bitmap and extent tests
  [ 9414.696455] BTRFS: selftest: running space stealing from bitmap to extent tests
  [ 9414.697131] BTRFS: selftest: running extent buffer operation tests
  [ 9414.697133] BTRFS: selftest: running btrfs_split_item tests
  [ 9414.697564] BTRFS: selftest: running extent I/O tests
  [ 9414.697583] BTRFS: selftest: running find delalloc tests
  [ 9415.081125] BTRFS: selftest: running find_first_clear_extent_bit test
  [ 9415.081278] BTRFS: selftest: running extent buffer bitmap tests
  [ 9415.124192] BTRFS: selftest: running inode tests
  [ 9415.124195] BTRFS: selftest: running btrfs_get_extent tests
  [ 9415.127909] BTRFS: selftest: running hole first btrfs_get_extent test
  [ 9415.128343] BTRFS critical (device (efault)): regular/prealloc extent found for non-regular inode 256
  [ 9415.131428] BTRFS: selftest: fs/btrfs/tests/inode-tests.c:904 expected a real extent, got 0

This happens because the test inodes are created without ever initializing
the i_mode field of the inode, and neither VFS's new_inode() nor the btrfs
callback btrfs_alloc_inode() initialize the i_mode. Initialization of the
i_mode is done through the various callbacks used by the VFS to create
new inodes (regular files, directories, symlinks, tmpfiles, etc), which
all call btrfs_new_inode() which in turn calls inode_init_owner(), which
sets the inode's i_mode. Since the tests only uses new_inode() to create
the test inodes, the i_mode was never initialized.

This always happens on a VM I used with kasan, slub_debug and many other
debug facilities enabled. It also happened to someone who reported this
on bugzilla (on a 5.3-rc).

Fix this by setting i_mode to S_IFREG at btrfs_new_test_inode().

Fixes: 6bf9e4bd6a2778 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204397
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/tests/btrfs-tests.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/tests/btrfs-tests.c b/fs/btrfs/tests/btrfs-tests.c
index 1e3ba49493995..814a918998ece 100644
--- a/fs/btrfs/tests/btrfs-tests.c
+++ b/fs/btrfs/tests/btrfs-tests.c
@@ -51,7 +51,13 @@ static struct file_system_type test_type = {
 
 struct inode *btrfs_new_test_inode(void)
 {
-	return new_inode(test_mnt->mnt_sb);
+	struct inode *inode;
+
+	inode = new_inode(test_mnt->mnt_sb);
+	if (inode)
+		inode_init_owner(inode, NULL, S_IFREG);
+
+	return inode;
 }
 
 static int btrfs_init_test_fs(void)
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 137/148] KVM: nVMX: Fix consistency check on injected exception error code
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (134 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 136/148] Btrfs: fix selftests failure due to uninitialized i_mode in test inodes Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 138/148] tick: broadcast-hrtimer: Fix a race in bc_set_next Greg Kroah-Hartman
                   ` (16 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Nadav Amit, Sean Christopherson,
	Jim Mattson, Paolo Bonzini, Sasha Levin

From: Sean Christopherson <sean.j.christopherson@intel.com>

[ Upstream commit 567926cca99ba1750be8aae9c4178796bf9bb90b ]

Current versions of Intel's SDM incorrectly state that "bits 31:15 of
the VM-Entry exception error-code field" must be zero.  In reality, bits
31:16 must be zero, i.e. error codes are 16-bit values.

The bogus error code check manifests as an unexpected VM-Entry failure
due to an invalid code field (error number 7) in L1, e.g. when injecting
a #GP with error_code=0x9f00.

Nadav previously reported the bug[*], both to KVM and Intel, and fixed
the associated kvm-unit-test.

[*] https://patchwork.kernel.org/patch/11124749/

Reported-by: Nadav Amit <namit@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/nested.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index a3cba321b5c5d..61aa9421e27af 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2584,7 +2584,7 @@ static int nested_check_vm_entry_controls(struct kvm_vcpu *vcpu,
 
 		/* VM-entry exception error code */
 		if (has_error_code &&
-		    vmcs12->vm_entry_exception_error_code & GENMASK(31, 15))
+		       vmcs12->vm_entry_exception_error_code & GENMASK(31, 16))
 			return -EINVAL;
 
 		/* VM-entry interruption-info field: reserved bits */
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 138/148] tick: broadcast-hrtimer: Fix a race in bc_set_next
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (135 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 137/148] KVM: nVMX: Fix consistency check on injected exception error code Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 139/148] perf stat: Reset previous counts on repeat with interval Greg Kroah-Hartman
                   ` (15 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Balasubramani Vivekanandan,
	Thomas Gleixner, Sasha Levin

From: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>

[ Upstream commit b9023b91dd020ad7e093baa5122b6968c48cc9e0 ]

When a cpu requests broadcasting, before starting the tick broadcast
hrtimer, bc_set_next() checks if the timer callback (bc_handler) is active
using hrtimer_try_to_cancel(). But hrtimer_try_to_cancel() does not provide
the required synchronization when the callback is active on other core.

The callback could have already executed tick_handle_oneshot_broadcast()
and could have also returned. But still there is a small time window where
the hrtimer_try_to_cancel() returns -1. In that case bc_set_next() returns
without doing anything, but the next_event of the tick broadcast clock
device is already set to a timeout value.

In the race condition diagram below, CPU #1 is running the timer callback
and CPU #2 is entering idle state and so calls bc_set_next().

In the worst case, the next_event will contain an expiry time, but the
hrtimer will not be started which happens when the racing callback returns
HRTIMER_NORESTART. The hrtimer might never recover if all further requests
from the CPUs to subscribe to tick broadcast have timeout greater than the
next_event of tick broadcast clock device. This leads to cascading of
failures and finally noticed as rcu stall warnings

Here is a depiction of the race condition

CPU #1 (Running timer callback)                   CPU #2 (Enter idle
                                                  and subscribe to
                                                  tick broadcast)
---------------------                             ---------------------

__run_hrtimer()                                   tick_broadcast_enter()

  bc_handler()                                      __tick_broadcast_oneshot_control()

    tick_handle_oneshot_broadcast()

      raw_spin_lock(&tick_broadcast_lock);

      dev->next_event = KTIME_MAX;                  //wait for tick_broadcast_lock
      //next_event for tick broadcast clock
      set to KTIME_MAX since no other cores
      subscribed to tick broadcasting

      raw_spin_unlock(&tick_broadcast_lock);

    if (dev->next_event == KTIME_MAX)
      return HRTIMER_NORESTART
    // callback function exits without
       restarting the hrtimer                      //tick_broadcast_lock acquired
                                                   raw_spin_lock(&tick_broadcast_lock);

                                                   tick_broadcast_set_event()

                                                     clockevents_program_event()

                                                       dev->next_event = expires;

                                                       bc_set_next()

                                                         hrtimer_try_to_cancel()
                                                         //returns -1 since the timer
                                                         callback is active. Exits without
                                                         restarting the timer
  cpu_base->running = NULL;

The comment that hrtimer cannot be armed from within the callback is
wrong. It is fine to start the hrtimer from within the callback. Also it is
safe to start the hrtimer from the enter/exit idle code while the broadcast
handler is active. The enter/exit idle code and the broadcast handler are
synchronized using tick_broadcast_lock. So there is no need for the
existing try to cancel logic. All this can be removed which will eliminate
the race condition as well.

Fixes: 5d1638acb9f6 ("tick: Introduce hrtimer based broadcast")
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Balasubramani Vivekanandan <balasubramani_vivekanandan@mentor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190926135101.12102-2-balasubramani_vivekanandan@mentor.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/time/tick-broadcast-hrtimer.c | 57 ++++++++++++++--------------
 1 file changed, 29 insertions(+), 28 deletions(-)

diff --git a/kernel/time/tick-broadcast-hrtimer.c b/kernel/time/tick-broadcast-hrtimer.c
index 5be6154e2fd2c..99fbfb8d9117c 100644
--- a/kernel/time/tick-broadcast-hrtimer.c
+++ b/kernel/time/tick-broadcast-hrtimer.c
@@ -42,34 +42,39 @@ static int bc_shutdown(struct clock_event_device *evt)
  */
 static int bc_set_next(ktime_t expires, struct clock_event_device *bc)
 {
-	int bc_moved;
 	/*
-	 * We try to cancel the timer first. If the callback is on
-	 * flight on some other cpu then we let it handle it. If we
-	 * were able to cancel the timer nothing can rearm it as we
-	 * own broadcast_lock.
+	 * This is called either from enter/exit idle code or from the
+	 * broadcast handler. In all cases tick_broadcast_lock is held.
 	 *
-	 * However we can also be called from the event handler of
-	 * ce_broadcast_hrtimer itself when it expires. We cannot
-	 * restart the timer because we are in the callback, but we
-	 * can set the expiry time and let the callback return
-	 * HRTIMER_RESTART.
+	 * hrtimer_cancel() cannot be called here neither from the
+	 * broadcast handler nor from the enter/exit idle code. The idle
+	 * code can run into the problem described in bc_shutdown() and the
+	 * broadcast handler cannot wait for itself to complete for obvious
+	 * reasons.
 	 *
-	 * Since we are in the idle loop at this point and because
-	 * hrtimer_{start/cancel} functions call into tracing,
-	 * calls to these functions must be bound within RCU_NONIDLE.
+	 * Each caller tries to arm the hrtimer on its own CPU, but if the
+	 * hrtimer callbback function is currently running, then
+	 * hrtimer_start() cannot move it and the timer stays on the CPU on
+	 * which it is assigned at the moment.
+	 *
+	 * As this can be called from idle code, the hrtimer_start()
+	 * invocation has to be wrapped with RCU_NONIDLE() as
+	 * hrtimer_start() can call into tracing.
 	 */
-	RCU_NONIDLE({
-			bc_moved = hrtimer_try_to_cancel(&bctimer) >= 0;
-			if (bc_moved)
-				hrtimer_start(&bctimer, expires,
-					      HRTIMER_MODE_ABS_PINNED);});
-	if (bc_moved) {
-		/* Bind the "device" to the cpu */
-		bc->bound_on = smp_processor_id();
-	} else if (bc->bound_on == smp_processor_id()) {
-		hrtimer_set_expires(&bctimer, expires);
-	}
+	RCU_NONIDLE( {
+		hrtimer_start(&bctimer, expires, HRTIMER_MODE_ABS_PINNED);
+		/*
+		 * The core tick broadcast mode expects bc->bound_on to be set
+		 * correctly to prevent a CPU which has the broadcast hrtimer
+		 * armed from going deep idle.
+		 *
+		 * As tick_broadcast_lock is held, nothing can change the cpu
+		 * base which was just established in hrtimer_start() above. So
+		 * the below access is safe even without holding the hrtimer
+		 * base lock.
+		 */
+		bc->bound_on = bctimer.base->cpu_base->cpu;
+	} );
 	return 0;
 }
 
@@ -95,10 +100,6 @@ static enum hrtimer_restart bc_handler(struct hrtimer *t)
 {
 	ce_broadcast_hrtimer.event_handler(&ce_broadcast_hrtimer);
 
-	if (clockevent_state_oneshot(&ce_broadcast_hrtimer))
-		if (ce_broadcast_hrtimer.next_event != KTIME_MAX)
-			return HRTIMER_RESTART;
-
 	return HRTIMER_NORESTART;
 }
 
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 139/148] perf stat: Reset previous counts on repeat with interval
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (136 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 138/148] tick: broadcast-hrtimer: Fix a race in bc_set_next Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 140/148] riscv: Avoid interrupts being erroneously enabled in handle_exception() Greg Kroah-Hartman
                   ` (14 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Srikar Dronamraju, Jiri Olsa,
	Arnaldo Carvalho de Melo, Ravi Bangoria, Namhyung Kim,
	Naveen N. Rao, Stephane Eranian, Sasha Levin

From: Srikar Dronamraju <srikar@linux.vnet.ibm.com>

[ Upstream commit b63fd11cced17fcb8e133def29001b0f6aaa5e06 ]

When using 'perf stat' with repeat and interval option, it shows wrong
values for events.

The wrong values will be shown for the first interval on the second and
subsequent repetitions.

Without the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.000282489                 53      faults
     2.000282489                513      sched:sched_switch
     4.005478208              3,721      faults
     4.005478208              2,666      sched:sched_switch
     5.025470933                395      faults
     5.025470933              1,307      sched:sched_switch
     2.009602825 1,84,46,74,40,73,70,95,47,520      faults 		<------
     2.009602825 1,84,46,74,40,73,70,95,49,568      sched:sched_switch  <------
     4.019612206              4,730      faults
     4.019612206              2,746      sched:sched_switch
     5.039615484              3,953      faults
     5.039615484              1,496      sched:sched_switch
     2.000274620 1,84,46,74,40,73,70,95,47,520      faults		<------
     2.000274620 1,84,46,74,40,73,70,95,47,520      sched:sched_switch	<------
     4.000480342              4,282      faults
     4.000480342              2,303      sched:sched_switch
     5.000916811              1,322      faults
     5.000916811              1,064      sched:sched_switch
  #

prev_raw_counts is allocated when using intervals. This is used when
calculating the difference in the counts of events when using interval.

The current counts are stored in prev_raw_counts to calculate the
differences in the next iteration.

On the first interval of the second and subsequent repetitions,
prev_raw_counts would be the values stored in the last interval of the
previous repetitions, while the current counts will only be for the
first interval of the current repetition.

Hence there is a possibility of events showing up as big number.

Fix this by resetting prev_raw_counts whenever perf stat repeats the
command.

With the fix:

  # perf stat -r 3 -I 2000 -e faults -e sched:sched_switch -a sleep 5

     2.019349347              2,597      faults
     2.019349347              2,753      sched:sched_switch
     4.019577372              3,098      faults
     4.019577372              2,532      sched:sched_switch
     5.019415481              1,879      faults
     5.019415481              1,356      sched:sched_switch
     2.000178813              8,468      faults
     2.000178813              2,254      sched:sched_switch
     4.000404621              7,440      faults
     4.000404621              1,266      sched:sched_switch
     5.040196079              2,458      faults
     5.040196079                556      sched:sched_switch
     2.000191939              6,870      faults
     2.000191939              1,170      sched:sched_switch
     4.000414103                541      faults
     4.000414103                902      sched:sched_switch
     5.000809863                450      faults
     5.000809863                364      sched:sched_switch
  #

Committer notes:

This was broken since the cset introducing the --interval feature, i.e.
--repeat + --interval wasn't tested at that point, add the Fixes tag so
that automatic scripts can pick this up.

Fixes: 13370a9b5bb8 ("perf stat: Add interval printing")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: stable@vger.kernel.org # v3.9+
Link: http://lore.kernel.org/lkml/20190904094738.9558-2-srikar@linux.vnet.ibm.com
[ Fixed up conflicts with libperf, i.e. some perf_{evsel,evlist} lost the 'perf' prefix ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-stat.c |  3 +++
 tools/perf/util/stat.c    | 17 +++++++++++++++++
 tools/perf/util/stat.h    |  1 +
 3 files changed, 21 insertions(+)

diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 3e13b231f2f56..8ec06bf3372c6 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1961,6 +1961,9 @@ int cmd_stat(int argc, const char **argv)
 			fprintf(output, "[ perf stat: executing run #%d ... ]\n",
 				run_idx + 1);
 
+		if (run_idx != 0)
+			perf_evlist__reset_prev_raw_counts(evsel_list);
+
 		status = run_perf_stat(argc, argv, run_idx);
 		if (forever && status != -1 && !interval) {
 			print_counters(NULL, argc, argv);
diff --git a/tools/perf/util/stat.c b/tools/perf/util/stat.c
index db8a6cf336bed..6ce66c2727474 100644
--- a/tools/perf/util/stat.c
+++ b/tools/perf/util/stat.c
@@ -155,6 +155,15 @@ static void perf_evsel__free_prev_raw_counts(struct perf_evsel *evsel)
 	evsel->prev_raw_counts = NULL;
 }
 
+static void perf_evsel__reset_prev_raw_counts(struct perf_evsel *evsel)
+{
+	if (evsel->prev_raw_counts) {
+		evsel->prev_raw_counts->aggr.val = 0;
+		evsel->prev_raw_counts->aggr.ena = 0;
+		evsel->prev_raw_counts->aggr.run = 0;
+       }
+}
+
 static int perf_evsel__alloc_stats(struct perf_evsel *evsel, bool alloc_raw)
 {
 	int ncpus = perf_evsel__nr_cpus(evsel);
@@ -205,6 +214,14 @@ void perf_evlist__reset_stats(struct perf_evlist *evlist)
 	}
 }
 
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel;
+
+	evlist__for_each_entry(evlist, evsel)
+		perf_evsel__reset_prev_raw_counts(evsel);
+}
+
 static void zero_per_pkg(struct perf_evsel *counter)
 {
 	if (counter->per_pkg_mask)
diff --git a/tools/perf/util/stat.h b/tools/perf/util/stat.h
index 7032dd1eeac2f..9cd0d9cff374a 100644
--- a/tools/perf/util/stat.h
+++ b/tools/perf/util/stat.h
@@ -194,6 +194,7 @@ void perf_stat__collect_metric_expr(struct perf_evlist *);
 int perf_evlist__alloc_stats(struct perf_evlist *evlist, bool alloc_raw);
 void perf_evlist__free_stats(struct perf_evlist *evlist);
 void perf_evlist__reset_stats(struct perf_evlist *evlist);
+void perf_evlist__reset_prev_raw_counts(struct perf_evlist *evlist);
 
 int perf_stat_process_counter(struct perf_stat_config *config,
 			      struct perf_evsel *counter);
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 140/148] riscv: Avoid interrupts being erroneously enabled in handle_exception()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (137 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 139/148] perf stat: Reset previous counts on repeat with interval Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 141/148] vfs: Fix EOVERFLOW testing in put_compat_statfs64 Greg Kroah-Hartman
                   ` (13 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Vincent Chen, Palmer Dabbelt,
	David Abdurachmanov, Paul Walmsley, Sasha Levin

From: Vincent Chen <vincent.chen@sifive.com>

[ Upstream commit c82dd6d078a2bb29d41eda032bb96d05699a524d ]

When the handle_exception function addresses an exception, the interrupts
will be unconditionally enabled after finishing the context save. However,
It may erroneously enable the interrupts if the interrupts are disabled
before entering the handle_exception.

For example, one of the WARN_ON() condition is satisfied in the scheduling
where the interrupt is disabled and rq.lock is locked. The WARN_ON will
trigger a break exception and the handle_exception function will enable the
interrupts before entering do_trap_break function. During the procedure, if
a timer interrupt is pending, it will be taken when interrupts are enabled.
In this case, it may cause a deadlock problem if the rq.lock is locked
again in the timer ISR.

Hence, the handle_exception() can only enable interrupts when the state of
sstatus.SPIE is 1.

This patch is tested on HiFive Unleashed board.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Fixes: bcae803a21317 ("RISC-V: Enable IRQ during exception handling")
Cc: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/entry.S | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index bc7a56e1ca6f4..9b60878a4469c 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -166,9 +166,13 @@ ENTRY(handle_exception)
 	move a0, sp /* pt_regs */
 	tail do_IRQ
 1:
-	/* Exceptions run with interrupts enabled */
+	/* Exceptions run with interrupts enabled or disabled
+	   depending on the state of sstatus.SR_SPIE */
+	andi t0, s1, SR_SPIE
+	beqz t0, 1f
 	csrs sstatus, SR_SIE
 
+1:
 	/* Handle syscalls */
 	li t0, EXC_SYSCALL
 	beq s4, t0, handle_syscall
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 141/148] vfs: Fix EOVERFLOW testing in put_compat_statfs64
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (138 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 140/148] riscv: Avoid interrupts being erroneously enabled in handle_exception() Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 142/148] coresight: etm4x: Use explicit barriers on enable/disable Greg Kroah-Hartman
                   ` (12 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Eric Sandeen, Linus Torvalds

From: Eric Sandeen <sandeen@redhat.com>

commit cc3a7bfe62b947b423fcb2cfe89fcba92bf48fa3 upstream.

Today, put_compat_statfs64() disallows nearly any field value over
2^32 if f_bsize is only 32 bits, but that makes no sense.
compat_statfs64 is there for the explicit purpose of providing 64-bit
fields for f_files, f_ffree, etc.  And f_bsize is always only 32 bits.

As a result, 32-bit userspace gets -EOVERFLOW for i.e.  large file
counts even with -D_FILE_OFFSET_BITS=64 set.

In reality, only f_bsize and f_frsize can legitimately overflow
(fields like f_type and f_namelen should never be large), so test
only those fields.

This bug was discussed at length some time ago, and this is the proposal
Al suggested at https://lkml.org/lkml/2018/8/6/640.  It seemed to get
dropped amid the discussion of other related changes, but this
part seems obviously correct on its own, so I've picked it up and
sent it, for expediency.

Fixes: 64d2ab32efe3 ("vfs: fix put_compat_statfs64() does not handle errors")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/statfs.c |   17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

--- a/fs/statfs.c
+++ b/fs/statfs.c
@@ -318,19 +318,10 @@ COMPAT_SYSCALL_DEFINE2(fstatfs, unsigned
 static int put_compat_statfs64(struct compat_statfs64 __user *ubuf, struct kstatfs *kbuf)
 {
 	struct compat_statfs64 buf;
-	if (sizeof(ubuf->f_bsize) == 4) {
-		if ((kbuf->f_type | kbuf->f_bsize | kbuf->f_namelen |
-		     kbuf->f_frsize | kbuf->f_flags) & 0xffffffff00000000ULL)
-			return -EOVERFLOW;
-		/* f_files and f_ffree may be -1; it's okay
-		 * to stuff that into 32 bits */
-		if (kbuf->f_files != 0xffffffffffffffffULL
-		 && (kbuf->f_files & 0xffffffff00000000ULL))
-			return -EOVERFLOW;
-		if (kbuf->f_ffree != 0xffffffffffffffffULL
-		 && (kbuf->f_ffree & 0xffffffff00000000ULL))
-			return -EOVERFLOW;
-	}
+
+	if ((kbuf->f_bsize | kbuf->f_frsize) & 0xffffffff00000000ULL)
+		return -EOVERFLOW;
+
 	memset(&buf, 0, sizeof(struct compat_statfs64));
 	buf.f_type = kbuf->f_type;
 	buf.f_bsize = kbuf->f_bsize;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 142/148] coresight: etm4x: Use explicit barriers on enable/disable
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (139 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 141/148] vfs: Fix EOVERFLOW testing in put_compat_statfs64 Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 143/148] staging: erofs: fix an error handling in erofs_readdir() Greg Kroah-Hartman
                   ` (11 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andrew Murray, Suzuki K Poulose,
	Mathieu Poirier

From: Andrew Murray <andrew.murray@arm.com>

commit 1004ce4c255fc3eb3ad9145ddd53547d1b7ce327 upstream.

Synchronization is recommended before disabling the trace registers
to prevent any start or stop points being speculative at the point
of disabling the unit (section 7.3.77 of ARM IHI 0064D).

Synchronization is also recommended after programming the trace
registers to ensure all updates are committed prior to normal code
resuming (section 4.3.7 of ARM IHI 0064D).

Let's ensure these syncronization points are present in the code
and clearly commented.

Note that we could rely on the barriers in CS_LOCK and
coresight_disclaim_device_unlocked or the context switch to user
space - however coresight may be of use in the kernel.

On armv8 the mb macro is defined as dsb(sy) - Given that the etm4x is
only used on armv8 let's directly use dsb(sy) instead of mb(). This
removes some ambiguity and makes it easier to correlate the code with
the TRM.

Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[Fixed capital letter for "use" in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20190829202842.580-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hwtracing/coresight/coresight-etm4x.c |   15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -188,6 +188,13 @@ static int etm4_enable_hw(struct etmv4_d
 		dev_err(etm_dev,
 			"timeout while waiting for Idle Trace Status\n");
 
+	/*
+	 * As recommended by section 4.3.7 ("Synchronization when using the
+	 * memory-mapped interface") of ARM IHI 0064D
+	 */
+	dsb(sy);
+	isb();
+
 done:
 	CS_LOCK(drvdata->base);
 
@@ -453,8 +460,12 @@ static void etm4_disable_hw(void *info)
 	/* EN, bit[0] Trace unit enable bit */
 	control &= ~0x1;
 
-	/* make sure everything completes before disabling */
-	mb();
+	/*
+	 * Make sure everything completes before disabling, as recommended
+	 * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register,
+	 * SSTATUS") of ARM IHI 0064D
+	 */
+	dsb(sy);
 	isb();
 	writel_relaxed(control, drvdata->base + TRCPRGCTLR);
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 143/148] staging: erofs: fix an error handling in erofs_readdir()
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (140 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 142/148] coresight: etm4x: Use explicit barriers on enable/disable Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 144/148] staging: erofs: some compressed cluster should be submitted for corrupted images Greg Kroah-Hartman
                   ` (10 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Richard Weinberger, Chao Yu, Gao Xiang

From: Gao Xiang <gaoxiang25@huawei.com>

commit acb383f1dcb4f1e79b66d4be3a0b6f519a957b0d upstream.

Richard observed a forever loop of erofs_read_raw_page() [1]
which can be generated by forcely setting ->u.i_blkaddr
to 0xdeadbeef (as my understanding block layer can
handle access beyond end of device correctly).

After digging into that, it seems the problem is highly
related with directories and then I found the root cause
is an improper error handling in erofs_readdir().

Let's fix it now.

[1] https://lore.kernel.org/r/1163995781.68824.1566084358245.JavaMail.zimbra@nod.at/

Reported-by: Richard Weinberger <richard@nod.at>
Fixes: 3aa8ec716e52 ("staging: erofs: add directory operations")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Link: https://lore.kernel.org/r/20190818125457.25906-1-hsiangkao@aol.com
[ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED,
             let's use original error code instead. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/erofs/dir.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/drivers/staging/erofs/dir.c
+++ b/drivers/staging/erofs/dir.c
@@ -99,8 +99,15 @@ static int erofs_readdir(struct file *f,
 		unsigned int nameoff, maxsize;
 
 		dentry_page = read_mapping_page(mapping, i, NULL);
-		if (IS_ERR(dentry_page))
-			continue;
+		if (dentry_page == ERR_PTR(-ENOMEM)) {
+			err = -ENOMEM;
+			break;
+		} else if (IS_ERR(dentry_page)) {
+			errln("fail to readdir of logical block %u of nid %llu",
+			      i, EROFS_V(dir)->nid);
+			err = PTR_ERR(dentry_page);
+			break;
+		}
 
 		de = (struct erofs_dirent *)kmap(dentry_page);
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 144/148] staging: erofs: some compressed cluster should be submitted for corrupted images
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (141 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 143/148] staging: erofs: fix an error handling in erofs_readdir() Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 145/148] staging: erofs: add two missing erofs_workgroup_put " Greg Kroah-Hartman
                   ` (9 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gao Xiang, Chao Yu

From: Gao Xiang <gaoxiang25@huawei.com>

commit ee45197c807895e156b2be0abcaebdfc116487c8 upstream.

As reported by erofs_utils fuzzer, a logical page can belong
to at most 2 compressed clusters, if one compressed cluster
is corrupted, but the other has been ready in submitting chain.

The chain needs to submit anyway in order to keep the page
working properly (page unlocked with PG_error set, PG_uptodate
not set).

Let's fix it now.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-2-gaoxiang25@huawei.com
[ Gao Xiang: Manually backport to v5.3.y stable. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/erofs/unzip_vle.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -1498,19 +1498,18 @@ static int z_erofs_vle_normalaccess_read
 	err = z_erofs_do_read_page(&f, page, &pagepool);
 	(void)z_erofs_vle_work_iter_end(&f.builder);
 
-	if (err) {
+	/* if some compressed cluster ready, need submit them anyway */
+	z_erofs_submit_and_unzip(&f, &pagepool, true);
+
+	if (err)
 		errln("%s, failed to read, err [%d]", __func__, err);
-		goto out;
-	}
 
-	z_erofs_submit_and_unzip(&f, &pagepool, true);
-out:
 	if (f.map.mpage)
 		put_page(f.map.mpage);
 
 	/* clean up the remaining free pages */
 	put_pages_list(&pagepool);
-	return 0;
+	return err;
 }
 
 static int z_erofs_vle_normalaccess_readpages(struct file *filp,



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 145/148] staging: erofs: add two missing erofs_workgroup_put for corrupted images
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (142 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 144/148] staging: erofs: some compressed cluster should be submitted for corrupted images Greg Kroah-Hartman
@ 2019-10-10  8:36 ` " Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 146/148] staging: erofs: avoid endless loop of invalid lookback distance 0 Greg Kroah-Hartman
                   ` (8 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gao Xiang, Chao Yu

From: Gao Xiang <gaoxiang25@huawei.com>

commit 138e1a0990e80db486ab9f6c06bd5c01f9a97999 upstream.

As reported by erofs-utils fuzzer, these error handling
path will be entered to handle corrupted images.

Lack of erofs_workgroup_puts will cause unmounting
unsuccessfully.

Fix these return values to EFSCORRUPTED as well.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-4-gaoxiang25@huawei.com
[ Gao Xiang: Older kernel versions don't have length validity check
             and EFSCORRUPTED, thus backport pageofs check for now. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/erofs/unzip_vle.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -393,7 +393,11 @@ z_erofs_vle_work_lookup(const struct z_e
 	/* if multiref is disabled, `primary' is always true */
 	primary = true;
 
-	DBG_BUGON(work->pageofs != f->pageofs);
+	if (work->pageofs != f->pageofs) {
+		DBG_BUGON(1);
+		erofs_workgroup_put(egrp);
+		return ERR_PTR(-EIO);
+	}
 
 	/*
 	 * lock must be taken first to avoid grp->next == NIL between



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 146/148] staging: erofs: avoid endless loop of invalid lookback distance 0
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (143 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 145/148] staging: erofs: add two missing erofs_workgroup_put " Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 147/148] staging: erofs: detect potential multiref due to corrupted images Greg Kroah-Hartman
                   ` (7 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gao Xiang, Chao Yu

From: Gao Xiang <gaoxiang25@huawei.com>

commit 598bb8913d015150b7734b55443c0e53e7189fc7 upstream.

As reported by erofs-utils fuzzer, Lookback distance should
be a positive number, so it should be actually looked back
rather than spinning.

Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190819103426.87579-7-gaoxiang25@huawei.com
[ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED,
             let's use EIO instead. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/erofs/zmap.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/staging/erofs/zmap.c
+++ b/drivers/staging/erofs/zmap.c
@@ -350,6 +350,12 @@ static int vle_extent_lookback(struct z_
 
 	switch (m->type) {
 	case Z_EROFS_VLE_CLUSTER_TYPE_NONHEAD:
+		if (!m->delta[0]) {
+			errln("invalid lookback distance 0 at nid %llu",
+			      vi->nid);
+			DBG_BUGON(1);
+			return -EIO;
+		}
 		return vle_extent_lookback(m, m->delta[0]);
 	case Z_EROFS_VLE_CLUSTER_TYPE_PLAIN:
 		map->m_flags &= ~EROFS_MAP_ZIPPED;



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 147/148] staging: erofs: detect potential multiref due to corrupted images
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (144 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 146/148] staging: erofs: avoid endless loop of invalid lookback distance 0 Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10  8:36 ` [PATCH 5.3 148/148] libnvdimm: prevent nvdimm from requesting key when security is disabled Greg Kroah-Hartman
                   ` (6 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Gao Xiang, Chao Yu

From: Gao Xiang <gaoxiang25@huawei.com>

commit e12a0ce2fa69798194f3a8628baf6edfbd5c548f upstream.

As reported by erofs-utils fuzzer, currently, multiref
(ondisk deduplication) hasn't been supported for now,
we should forbid it properly.

Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Link: https://lore.kernel.org/r/20190821140152.229648-1-gaoxiang25@huawei.com
[ Gao Xiang: Since earlier kernels don't define EFSCORRUPTED,
             let's use EIO instead. ]
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/staging/erofs/unzip_vle.c |   20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

--- a/drivers/staging/erofs/unzip_vle.c
+++ b/drivers/staging/erofs/unzip_vle.c
@@ -943,6 +943,7 @@ repeat:
 	for (i = 0; i < nr_pages; ++i)
 		pages[i] = NULL;
 
+	err = 0;
 	z_erofs_pagevec_ctor_init(&ctor, Z_EROFS_NR_INLINE_PAGEVECS,
 				  work->pagevec, 0);
 
@@ -964,8 +965,17 @@ repeat:
 			pagenr = z_erofs_onlinepage_index(page);
 
 		DBG_BUGON(pagenr >= nr_pages);
-		DBG_BUGON(pages[pagenr]);
 
+		/*
+		 * currently EROFS doesn't support multiref(dedup),
+		 * so here erroring out one multiref page.
+		 */
+		if (pages[pagenr]) {
+			DBG_BUGON(1);
+			SetPageError(pages[pagenr]);
+			z_erofs_onlinepage_endio(pages[pagenr]);
+			err = -EIO;
+		}
 		pages[pagenr] = page;
 	}
 	sparsemem_pages = i;
@@ -975,7 +985,6 @@ repeat:
 	overlapped = false;
 	compressed_pages = grp->compressed_pages;
 
-	err = 0;
 	for (i = 0; i < clusterpages; ++i) {
 		unsigned int pagenr;
 
@@ -999,7 +1008,12 @@ repeat:
 			pagenr = z_erofs_onlinepage_index(page);
 
 			DBG_BUGON(pagenr >= nr_pages);
-			DBG_BUGON(pages[pagenr]);
+			if (pages[pagenr]) {
+				DBG_BUGON(1);
+				SetPageError(pages[pagenr]);
+				z_erofs_onlinepage_endio(pages[pagenr]);
+				err = -EIO;
+			}
 			++sparsemem_pages;
 			pages[pagenr] = page;
 



^ permalink raw reply	[flat|nested] 161+ messages in thread

* [PATCH 5.3 148/148] libnvdimm: prevent nvdimm from requesting key when security is disabled
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (145 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 147/148] staging: erofs: detect potential multiref due to corrupted images Greg Kroah-Hartman
@ 2019-10-10  8:36 ` Greg Kroah-Hartman
  2019-10-10 14:41 ` [PATCH 5.3 000/148] 5.3.6-stable review kernelci.org bot
                   ` (5 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  8:36 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dave Jiang, Dan Williams, Sasha Levin

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit 674f31a352da5e9f621f757b9a89262f486533a0 ]

Current implementation attempts to request keys from the keyring even when
security is not enabled. Change behavior so when security is disabled it
will skip key request.

Error messages seen when no keys are installed and libnvdimm is loaded:

    request-key[4598]: Cannot find command to construct key 661489677
    request-key[4606]: Cannot find command to construct key 34713726

Cc: stable@vger.kernel.org
Fixes: 4c6926a23b76 ("acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/156934642272.30222.5230162488753445916.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvdimm/security.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/nvdimm/security.c b/drivers/nvdimm/security.c
index a570f2263a424..5b7ea93edb935 100644
--- a/drivers/nvdimm/security.c
+++ b/drivers/nvdimm/security.c
@@ -177,6 +177,10 @@ static int __nvdimm_security_unlock(struct nvdimm *nvdimm)
 			|| nvdimm->sec.state < 0)
 		return -EIO;
 
+	/* No need to go further if security is disabled */
+	if (nvdimm->sec.state == NVDIMM_SECURITY_DISABLED)
+		return 0;
+
 	if (test_bit(NDD_SECURITY_OVERWRITE, &nvdimm->flags)) {
 		dev_dbg(dev, "Security operation in progress.\n");
 		return -EBUSY;
-- 
2.20.1




^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  2019-10-10  8:35 ` [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence Greg Kroah-Hartman
@ 2019-10-10  8:49   ` Russell King - ARM Linux admin
  2019-10-10  9:10     ` Greg Kroah-Hartman
  0 siblings, 1 reply; 161+ messages in thread
From: Russell King - ARM Linux admin @ 2019-10-10  8:49 UTC (permalink / raw)
  To: Greg Kroah-Hartman; +Cc: linux-kernel, stable, Adrian Hunter, Ulf Hansson

Hi Greg,

On 5th October, Christian Zigotzky <chzigotzky@xenosoft.de> reported a
problem with this on PowerPC (at a guess, it looks like there's a
PowerPC user of this where the DT does not mark the device as
dma-coherent, but the hardware requires it to be DMA coherent.)

However, despite sending a reply to him within minutes of his email
arriving, I've heard nothing since, so there's been no progress on
working out what is really going on.

Given that the reporter hasn't responded to my reply, I'm not sure
what we should be doing with this... maybe the reporter has solved
his problem, maybe he was using an incorrect DT, we just don't know.

On Thu, Oct 10, 2019 at 10:35:37AM +0200, Greg Kroah-Hartman wrote:
> From: Russell King <rmk+kernel@armlinux.org.uk>
> 
> commit 121bd08b029e03404c451bb237729cdff76eafed upstream.
> 
> We must not unconditionally set the DMA snoop bit; if the DMA API is
> assuming that the device is not DMA coherent, and the device snoops the
> CPU caches, the device can see stale cache lines brought in by
> speculative prefetch.
> 
> This leads to the device seeing stale data, potentially resulting in
> corrupted data transfers.  Commonly, this results in a descriptor fetch
> error such as:
> 
> mmc0: ADMA error
> mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
> mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
> mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
> mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
> mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
> mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
> mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
> mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
> mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
> mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
> mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
> mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
> mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
> mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
> mmc0: sdhci: Host ctl2: 0x00000000
> mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
> mmc0: sdhci: ============================================
> mmc0: error -5 whilst initialising SD card
> 
> but can lead to other errors, and potentially direct the SDHCI
> controller to read/write data to other memory locations (e.g. if a valid
> descriptor is visible to the device in a stale cache line.)
> 
> Fix this by ensuring that the DMA snoop bit corresponds with the
> behaviour of the DMA API.  Since the driver currently only supports DT,
> use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
> used as that risks re-introducing this bug if/when the driver is
> converted to ACPI.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  drivers/mmc/host/sdhci-of-esdhc.c |    7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> --- a/drivers/mmc/host/sdhci-of-esdhc.c
> +++ b/drivers/mmc/host/sdhci-of-esdhc.c
> @@ -495,7 +495,12 @@ static int esdhc_of_enable_dma(struct sd
>  		dma_set_mask_and_coherent(dev, DMA_BIT_MASK(40));
>  
>  	value = sdhci_readl(host, ESDHC_DMA_SYSCTL);
> -	value |= ESDHC_DMA_SNOOP;
> +
> +	if (of_dma_is_coherent(dev->of_node))
> +		value |= ESDHC_DMA_SNOOP;
> +	else
> +		value &= ~ESDHC_DMA_SNOOP;
> +
>  	sdhci_writel(host, value, ESDHC_DMA_SYSCTL);
>  	return 0;
>  }
> 
> 
> 

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence
  2019-10-10  8:49   ` Russell King - ARM Linux admin
@ 2019-10-10  9:10     ` Greg Kroah-Hartman
  0 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-10  9:10 UTC (permalink / raw)
  To: Russell King - ARM Linux admin
  Cc: linux-kernel, stable, Adrian Hunter, Ulf Hansson

On Thu, Oct 10, 2019 at 09:49:12AM +0100, Russell King - ARM Linux admin wrote:
> Hi Greg,
> 
> On 5th October, Christian Zigotzky <chzigotzky@xenosoft.de> reported a
> problem with this on PowerPC (at a guess, it looks like there's a
> PowerPC user of this where the DT does not mark the device as
> dma-coherent, but the hardware requires it to be DMA coherent.)
> 
> However, despite sending a reply to him within minutes of his email
> arriving, I've heard nothing since, so there's been no progress on
> working out what is really going on.
> 
> Given that the reporter hasn't responded to my reply, I'm not sure
> what we should be doing with this... maybe the reporter has solved
> his problem, maybe he was using an incorrect DT, we just don't know.

Let's just leave this in, and if this did cause a problem, whatever fix
is made will be sent to Linus and we can then take that fix into stable
as well.

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (146 preceding siblings ...)
  2019-10-10  8:36 ` [PATCH 5.3 148/148] libnvdimm: prevent nvdimm from requesting key when security is disabled Greg Kroah-Hartman
@ 2019-10-10 14:41 ` kernelci.org bot
  2019-10-10 17:09 ` Naresh Kamboju
                   ` (4 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: kernelci.org bot @ 2019-10-10 14:41 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

stable-rc/linux-5.3.y boot: 130 boots: 4 failed, 116 passed with 10 offline (v5.3.5-149-ge863f125e178)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-5.3.y/kernel/v5.3.5-149-ge863f125e178/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-5.3.y/kernel/v5.3.5-149-ge863f125e178/

Tree: stable-rc
Branch: linux-5.3.y
Git Describe: v5.3.5-149-ge863f125e178
Git Commit: e863f125e178f8d2edf7a3a03e7fc144d3af82c2
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 80 unique boards, 24 SoC families, 18 builds out of 208

Boot Failures Detected:

arm:
    imx_v6_v7_defconfig:
        gcc-8:
            imx53-qsrb: 1 failed lab

    multi_v7_defconfig:
        gcc-8:
            imx53-qsrb: 1 failed lab

i386:
    i386_defconfig:
        gcc-8:
            qemu_i386: 1 failed lab

arm64:
    defconfig:
        gcc-8:
            meson-gxl-s805x-libretech-ac: 1 failed lab

Offline Platforms:

arm:

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

    multi_v7_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

---
For more info write to <info@kernelci.org>

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (147 preceding siblings ...)
  2019-10-10 14:41 ` [PATCH 5.3 000/148] 5.3.6-stable review kernelci.org bot
@ 2019-10-10 17:09 ` Naresh Kamboju
  2019-10-11  6:48   ` Greg Kroah-Hartman
  2019-10-10 20:59 ` Didik Setiawan
                   ` (3 subsequent siblings)
  152 siblings, 1 reply; 161+ messages in thread
From: Naresh Kamboju @ 2019-10-10 17:09 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable

On Thu, 10 Oct 2019 at 14:09, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.3.6 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 5.3.6-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.3.y
git commit: e863f125e178f8d2edf7a3a03e7fc144d3af82c2
git describe: v5.3.5-149-ge863f125e178
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.3-oe/build/v5.3.5-149-ge863f125e178

No regressions (compared to build v5.3.5)

No fixes (compared to build v5.3.5)

Ran 23503 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* spectre-meltdown-checker-test
* ltp-syscalls-tests
* ltp-timers-tests
* network-basic-tests
* perf
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

-- 
Linaro LKFT
https://lkft.linaro.org

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (148 preceding siblings ...)
  2019-10-10 17:09 ` Naresh Kamboju
@ 2019-10-10 20:59 ` Didik Setiawan
  2019-10-10 22:19 ` Guenter Roeck
                   ` (2 subsequent siblings)
  152 siblings, 0 replies; 161+ messages in thread
From: Didik Setiawan @ 2019-10-10 20:59 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable

On Thu, Oct 10, 2019 at 10:34:21AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.6 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled, booted, and no regressions found on my x86_64 system.

Thanks,
Didik Setiawan 


^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (149 preceding siblings ...)
  2019-10-10 20:59 ` Didik Setiawan
@ 2019-10-10 22:19 ` Guenter Roeck
  2019-10-11  6:49   ` Greg Kroah-Hartman
  2019-10-11  3:02 ` shuah
  2019-10-11  8:33 ` Jon Hunter
  152 siblings, 1 reply; 161+ messages in thread
From: Guenter Roeck @ 2019-10-10 22:19 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, shuah, patches, ben.hutchings, lkft-triage, stable

On 10/10/19 1:34 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.6 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 158 pass: 158 fail: 0
Qemu test results:
	total: 391 pass: 391 fail: 0

Guenter

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 111/148] x86/purgatory: Disable the stackleak GCC plugin for the purgatory
       [not found]   ` <BYAPR04MB62468F03E52BCE23B5CD1C91AA940@BYAPR04MB6246.namprd04.prod.outlook.com>
@ 2019-10-10 23:32     ` Sasha Levin
  0 siblings, 0 replies; 161+ messages in thread
From: Sasha Levin @ 2019-10-10 23:32 UTC (permalink / raw)
  To: niveditas98 .
  Cc: Greg Kroah-Hartman, linux-kernel, stable, Nick Desaulniers,
	Borislav Petkov, H. Peter Anvin, Linus Torvalds, Peter Zijlstra,
	Thomas Gleixner, Ingo Molnar

On Thu, Oct 10, 2019 at 04:22:20PM +0000, niveditas98 . wrote:
>Is it applied to 5.2 as well? Only saw mails for 4.19 and 5.3.

5.2 is EOL.

-- 
Thanks,
Sasha

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (150 preceding siblings ...)
  2019-10-10 22:19 ` Guenter Roeck
@ 2019-10-11  3:02 ` shuah
  2019-10-11  6:47   ` Greg Kroah-Hartman
  2019-10-11  8:33 ` Jon Hunter
  152 siblings, 1 reply; 161+ messages in thread
From: shuah @ 2019-10-11  3:02 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, patches, ben.hutchings, lkft-triage,
	stable, shuah

On 10/10/19 2:34 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.6 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-11  3:02 ` shuah
@ 2019-10-11  6:47   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-11  6:47 UTC (permalink / raw)
  To: shuah
  Cc: linux-kernel, torvalds, akpm, linux, patches, ben.hutchings,
	lkft-triage, stable

On Thu, Oct 10, 2019 at 09:02:45PM -0600, shuah wrote:
> On 10/10/19 2:34 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.3.6 release.
> > There are 148 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing these and letting me know.

greg k-h

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10 17:09 ` Naresh Kamboju
@ 2019-10-11  6:48   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-11  6:48 UTC (permalink / raw)
  To: Naresh Kamboju
  Cc: open list, Linus Torvalds, Andrew Morton, Guenter Roeck,
	Shuah Khan, patches, Ben Hutchings, lkft-triage, linux- stable

On Thu, Oct 10, 2019 at 10:39:23PM +0530, Naresh Kamboju wrote:
> On Thu, 10 Oct 2019 at 14:09, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.3.6 release.
> > There are 148 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all 3 of these and letting me know.

greg k-h

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10 22:19 ` Guenter Roeck
@ 2019-10-11  6:49   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-11  6:49 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: linux-kernel, torvalds, akpm, shuah, patches, ben.hutchings,
	lkft-triage, stable

On Thu, Oct 10, 2019 at 03:19:54PM -0700, Guenter Roeck wrote:
> On 10/10/19 1:34 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.3.6 release.
> > There are 148 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 158 pass: 158 fail: 0
> Qemu test results:
> 	total: 391 pass: 391 fail: 0

Great!  Hopefully 4.14 now works for you, and thanks for testing all of
these.

greg k-h

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
                   ` (151 preceding siblings ...)
  2019-10-11  3:02 ` shuah
@ 2019-10-11  8:33 ` Jon Hunter
  2019-10-11  8:58   ` Greg Kroah-Hartman
  152 siblings, 1 reply; 161+ messages in thread
From: Jon Hunter @ 2019-10-11  8:33 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, shuah, patches, ben.hutchings,
	lkft-triage, stable, linux-tegra


On 10/10/2019 09:34, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.6 release.
> There are 148 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.3:
    12 builds:	12 pass, 0 fail
    22 boots:	22 pass, 0 fail
    38 tests:	38 pass, 0 fail

Linux version:	5.3.6-rc1-ge863f125e178
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

^ permalink raw reply	[flat|nested] 161+ messages in thread

* Re: [PATCH 5.3 000/148] 5.3.6-stable review
  2019-10-11  8:33 ` Jon Hunter
@ 2019-10-11  8:58   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 161+ messages in thread
From: Greg Kroah-Hartman @ 2019-10-11  8:58 UTC (permalink / raw)
  To: Jon Hunter
  Cc: linux-kernel, torvalds, akpm, linux, shuah, patches,
	ben.hutchings, lkft-triage, stable, linux-tegra

On Fri, Oct 11, 2019 at 09:33:41AM +0100, Jon Hunter wrote:
> 
> On 10/10/2019 09:34, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.3.6 release.
> > There are 148 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sat 12 Oct 2019 08:29:51 AM UTC.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.6-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> All tests passing for Tegra ...
> 
> Test results for stable-v5.3:
>     12 builds:	12 pass, 0 fail
>     22 boots:	22 pass, 0 fail
>     38 tests:	38 pass, 0 fail
> 
> Linux version:	5.3.6-rc1-ge863f125e178
> Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
>                 tegra194-p2972-0000, tegra20-ventana,
>                 tegra210-p2371-2180, tegra30-cardhu-a04
> 

Great, thanks for testing all of these and letting me know.

greg k-h

^ permalink raw reply	[flat|nested] 161+ messages in thread

end of thread, back to index

Thread overview: 161+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-10  8:34 [PATCH 5.3 000/148] 5.3.6-stable review Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 001/148] s390/process: avoid potential reading of freed stack Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 002/148] s390/sclp: Fix bit checked for has_sipl Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 003/148] KVM: s390: Test for bad access register and size at the start of S390_MEM_OP Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 004/148] s390/topology: avoid firing events before kobjs are created Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 005/148] s390/cio: avoid calling strlen on null pointer Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 006/148] s390/cio: exclude subchannels with no parent from pseudo check Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 007/148] s390/dasd: Fix error handling during online processing Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 008/148] Revert "s390/dasd: Add discard support for ESE volumes" Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 009/148] KVM: s390: fix __insn32_query() inline assembly Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 010/148] KVM: PPC: Book3S: Enable XIVE native capability only if OPAL has required functions Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 011/148] KVM: PPC: Book3S HV: XIVE: Free escalation interrupts before disabling the VP Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 012/148] KVM: PPC: Book3S HV: Dont push XIVE context when not using XIVE device Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 013/148] KVM: PPC: Book3S HV: Fix race in re-enabling XIVE escalation interrupts Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 014/148] KVM: PPC: Book3S HV: Check for MMU ready on piggybacked virtual cores Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 015/148] KVM: PPC: Book3S HV: Dont lose pending doorbell request on migration on P9 Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 016/148] KVM: X86: Fix userspace set invalid CR4 Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 017/148] nbd: fix max number of supported devs Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 018/148] PM / devfreq: tegra: Fix kHz to Hz conversion Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 019/148] ASoC: Define a set of DAPM pre/post-up events Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 020/148] ASoC: sgtl5000: Improve VAG power and mute control Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 021/148] powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 022/148] powerpc/mce: Fix MCE handling for huge pages Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 023/148] powerpc/mce: Schedule work from irq_work Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 024/148] powerpc/603: Fix handling of the DIRTY flag Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 025/148] powerpc/32s: Fix boot failure with DEBUG_PAGEALLOC without KASAN Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 026/148] powerpc/ptdump: Fix addresses display on PPC32 Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 027/148] powerpc/powernv: Restrict OPAL symbol map to only be readable by root Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 028/148] powerpc/pseries: Fix cpu_hotplug_lock acquisition in resize_hpt() Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 029/148] powerpc/powernv/ioda: Fix race in TCE level allocation Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 030/148] powerpc/kasan: Fix parallel loading of modules Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 031/148] powerpc/kasan: Fix shadow area set up for modules Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 032/148] powerpc/book3s64/mm: Dont do tlbie fixup for some hardware revisions Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 033/148] powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 034/148] powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 035/148] powerpc/mm: Fix an Oops in kasan_mmu_init() Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 036/148] powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9 Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 037/148] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset Greg Kroah-Hartman
2019-10-10  8:34 ` [PATCH 5.3 038/148] tools lib traceevent: Fix "robust" test of do_generate_dynamic_list_file Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 039/148] tools lib traceevent: Do not free tep->cmdlines in add_new_comm() on failure Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 040/148] crypto: qat - Silence smp_processor_id() warning Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 041/148] crypto: skcipher - Unmap pages after an external error Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 042/148] crypto: cavium/zip - Add missing single_release() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 043/148] crypto: caam/qi - fix error handling in ERN handler Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 044/148] crypto: caam - fix concurrency issue in givencrypt descriptor Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 045/148] crypto: ccree - account for TEE not ready to report Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 046/148] crypto: ccree - use the full crypt length value Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 047/148] MIPS: Treat Loongson Extensions as ASEs Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 048/148] power: supply: sbs-battery: use correct flags field Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 049/148] power: supply: sbs-battery: only return health when battery present Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 050/148] tracing: Make sure variable reference alias has correct var_ref_idx Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 051/148] usercopy: Avoid HIGHMEM pfn warning Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 052/148] timer: Read jiffies once when forwarding base clk Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 053/148] PCI: vmd: Fix config addressing when using bus offsets Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 054/148] PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 055/148] PCI: vmd: Fix shadow offsets to reflect spec changes Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 056/148] PCI: Restore Resizable BAR size bits correctly for 1MB BARs Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 057/148] selftests/tpm2: Add the missing TEST_FILES assignment Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 058/148] selftests: pidfd: Fix undefined reference to pthread_create() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 059/148] watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 061/148] perf stat: Fix a segmentation fault when using repeat forever Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 062/148] drm/i915/dp: Fix dsc bpp calculations, v5 Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 063/148] drm/atomic: Reject FLIP_ASYNC unconditionally Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 064/148] drm/atomic: Take the atomic toys away from X Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 065/148] drm: mali-dp: Mark expected switch fall-through Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 066/148] drm/omap: fix max fclk divider for omap36xx Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 067/148] drm/msm/dsi: Fix return value check for clk_get_parent Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 068/148] drm/nouveau/kms/nv50-: Dont create MSTMs for eDP connectors Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 069/148] drm/amd/powerplay: change metrics update period from 1ms to 100ms Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 070/148] drm/i915/gvt: update vgpu workload head pointer correctly Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 071/148] drm/i915/userptr: Acquire the page lock around set_page_dirty() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 072/148] drm/i915: to make vgpu ppgtt notificaiton as atomic operation Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 073/148] mac80211: keep BHs disabled while calling drv_tx_wake_queue() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 074/148] mmc: tegra: Implement ->set_dma_mask() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 075/148] mmc: sdhci: improve ADMA error reporting Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 076/148] mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence Greg Kroah-Hartman
2019-10-10  8:49   ` Russell King - ARM Linux admin
2019-10-10  9:10     ` Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 077/148] mmc: sdhci: Let drivers define their DMA mask Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 078/148] Revert "locking/pvqspinlock: Dont wait if vCPU is preempted" Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 079/148] libnvdimm/altmap: Track namespace boundaries in altmap Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 080/148] sched: Add __ASSEMBLY__ guards around struct clone_args Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 081/148] DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 082/148] xen/balloon: Set pages PageOffline() in balloon_add_region() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 083/148] xen/xenbus: fix self-deadlock after killing user process Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 084/148] ieee802154: atusb: fix use-after-free at disconnect Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 085/148] nl80211: validate beacon head Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 086/148] cfg80211: validate SSID/MBSSID element ordering assumption Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 087/148] cfg80211: initialize on-stack chandefs Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 088/148] drivers: thermal: qcom: tsens: Fix memory leak from qfprom read Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 089/148] ima: always return negative code for error Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 090/148] ima: fix freeing ongoing ahash_request Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 091/148] fs: nfs: Fix possible null-pointer dereferences in encode_attrs() Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 092/148] xprtrdma: Toggle XPRT_CONGESTED in xprtrdmas slot methods Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 093/148] xprtrdma: Send Queue size grows after a reconnect Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 094/148] 9p: Transport error uninitialized Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 095/148] 9p: avoid attaching writeback_fid on mmap with type PRIVATE Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 096/148] xen/pci: reserve MCFG areas earlier Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 097/148] fuse: fix request limit Greg Kroah-Hartman
2019-10-10  8:35 ` [PATCH 5.3 098/148] ceph: fix directories inode i_blkbits initialization Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 099/148] ceph: fetch cap_gen under spinlock in ceph_add_cap Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 100/148] ceph: reconnect connection if session hang in opening state Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 101/148] SUNRPC: RPC level errors should always set task->tk_rpc_status Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 102/148] watchdog: aspeed: Add support for AST2600 Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 103/148] netfilter: nf_tables: allow lookups in dynamic sets Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 104/148] drm/amdgpu: Fix KFD-related kernel oops on Hawaii Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 105/148] drm/amdgpu: Check for valid number of registers to read Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 106/148] perf probe: Fix to clear tev->nargs in clear_probe_trace_event() Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 107/148] pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 108/148] SUNRPC: Dont try to parse incomplete RPC messages Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 109/148] pwm: stm32-lp: Add check in case requested period cannot be achieved Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 110/148] selftests/seccomp: fix build on older kernels Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 111/148] x86/purgatory: Disable the stackleak GCC plugin for the purgatory Greg Kroah-Hartman
     [not found]   ` <BYAPR04MB62468F03E52BCE23B5CD1C91AA940@BYAPR04MB6246.namprd04.prod.outlook.com>
2019-10-10 23:32     ` Sasha Levin
2019-10-10  8:36 ` [PATCH 5.3 112/148] ntb: point to right memory window index Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 113/148] thermal: Fix use-after-free when unregistering thermal zone device Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 114/148] thermal_hwmon: Sanitize thermal_zone type Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 115/148] iommu/amd: Fix downgrading default page-sizes in alloc_pte() Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 116/148] libnvdimm/region: Initialize bad block for volatile namespaces Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 117/148] libnvdimm: Fix endian conversion issues Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 118/148] fuse: fix memleak in cuse_channel_open Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 119/148] libnvdimm/nfit_test: Fix acpi_handle redefinition Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 120/148] sched/membarrier: Call sync_core only before usermode for same mm Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 121/148] sched/membarrier: Fix private expedited registration check Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 122/148] sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr() Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 123/148] perf build: Add detection of java-11-openjdk-devel package Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 124/148] include/trace/events/writeback.h: fix -Wstringop-truncation warnings Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 125/148] selftests/bpf: adjust strobemeta loop to satisfy latest clang Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 126/148] kernel/elfcore.c: include proper prototypes Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 127/148] libbpf: fix false uninitialized variable warning Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 128/148] blk-mq: move lockdep_assert_held() into elevator_exit Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 129/148] bpf: Fix bpf_event_output re-entry issue Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 130/148] net: dsa: microchip: Always set regmap stride to 1 Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 131/148] i2c: qcom-geni: Disable DMA processing on the Lenovo Yoga C630 Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 132/148] perf unwind: Fix libunwind build failure on i386 systems Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 133/148] mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 134/148] nfp: abm: fix memory leak in nfp_abm_u32_knode_replace Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 135/148] drm/radeon: Bail earlier when radeon.cik_/si_support=0 is passed Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 136/148] Btrfs: fix selftests failure due to uninitialized i_mode in test inodes Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 137/148] KVM: nVMX: Fix consistency check on injected exception error code Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 138/148] tick: broadcast-hrtimer: Fix a race in bc_set_next Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 139/148] perf stat: Reset previous counts on repeat with interval Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 140/148] riscv: Avoid interrupts being erroneously enabled in handle_exception() Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 141/148] vfs: Fix EOVERFLOW testing in put_compat_statfs64 Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 142/148] coresight: etm4x: Use explicit barriers on enable/disable Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 143/148] staging: erofs: fix an error handling in erofs_readdir() Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 144/148] staging: erofs: some compressed cluster should be submitted for corrupted images Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 145/148] staging: erofs: add two missing erofs_workgroup_put " Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 146/148] staging: erofs: avoid endless loop of invalid lookback distance 0 Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 147/148] staging: erofs: detect potential multiref due to corrupted images Greg Kroah-Hartman
2019-10-10  8:36 ` [PATCH 5.3 148/148] libnvdimm: prevent nvdimm from requesting key when security is disabled Greg Kroah-Hartman
2019-10-10 14:41 ` [PATCH 5.3 000/148] 5.3.6-stable review kernelci.org bot
2019-10-10 17:09 ` Naresh Kamboju
2019-10-11  6:48   ` Greg Kroah-Hartman
2019-10-10 20:59 ` Didik Setiawan
2019-10-10 22:19 ` Guenter Roeck
2019-10-11  6:49   ` Greg Kroah-Hartman
2019-10-11  3:02 ` shuah
2019-10-11  6:47   ` Greg Kroah-Hartman
2019-10-11  8:33 ` Jon Hunter
2019-10-11  8:58   ` Greg Kroah-Hartman

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org stable@archiver.kernel.org
	public-inbox-index stable

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/ public-inbox