stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Sterba <dsterba@suse.com>
To: linux-btrfs@vger.kernel.org
Cc: Qu Wenruo <wqu@suse.com>,
	nborisov@suse.com, josef@toxicpanda.com,
	Zygo Blaxell <ce3g8jdj@umail.furryterror.org>,
	stable@vger.kernel.org, David Sterba <dsterba@suse.com>
Subject: [PATCH] btrfs: relocation: fix reloc_root lifespan and access
Date: Mon, 13 Jan 2020 20:16:17 +0100	[thread overview]
Message-ID: <20200113191617.3542-1-dsterba@suse.com> (raw)

From: Qu Wenruo <wqu@suse.com>

This is what I'm going to commit, but as this has a long discussion
behind I'm sending it to the mailinglist.

* there are 2 helpers to avoid using raw barriers in the tests where there
  are at least 2 places
* each barrier is commented
* subject and changelog have been updated to reflect the changes

https://lore.kernel.org/linux-btrfs/20200108051200.8909-1-wqu@suse.com/

---

[BUG]
There are several different KASAN reports for balance + snapshot
workloads.  Involved call paths include:

   should_ignore_root+0x54/0xb0 [btrfs]
   build_backref_tree+0x11af/0x2280 [btrfs]
   relocate_tree_blocks+0x391/0xb80 [btrfs]
   relocate_block_group+0x3e5/0xa00 [btrfs]
   btrfs_relocate_block_group+0x240/0x4d0 [btrfs]
   btrfs_relocate_chunk+0x53/0xf0 [btrfs]
   btrfs_balance+0xc91/0x1840 [btrfs]
   btrfs_ioctl_balance+0x416/0x4e0 [btrfs]
   btrfs_ioctl+0x8af/0x3e60 [btrfs]
   do_vfs_ioctl+0x831/0xb10

   create_reloc_root+0x9f/0x460 [btrfs]
   btrfs_reloc_post_snapshot+0xff/0x6c0 [btrfs]
   create_pending_snapshot+0xa9b/0x15f0 [btrfs]
   create_pending_snapshots+0x111/0x140 [btrfs]
   btrfs_commit_transaction+0x7a6/0x1360 [btrfs]
   btrfs_mksubvol+0x915/0x960 [btrfs]
   btrfs_ioctl_snap_create_transid+0x1d5/0x1e0 [btrfs]
   btrfs_ioctl_snap_create_v2+0x1d3/0x270 [btrfs]
   btrfs_ioctl+0x241b/0x3e60 [btrfs]
   do_vfs_ioctl+0x831/0xb10

   btrfs_reloc_pre_snapshot+0x85/0xc0 [btrfs]
   create_pending_snapshot+0x209/0x15f0 [btrfs]
   create_pending_snapshots+0x111/0x140 [btrfs]
   btrfs_commit_transaction+0x7a6/0x1360 [btrfs]
   btrfs_mksubvol+0x915/0x960 [btrfs]
   btrfs_ioctl_snap_create_transid+0x1d5/0x1e0 [btrfs]
   btrfs_ioctl_snap_create_v2+0x1d3/0x270 [btrfs]
   btrfs_ioctl+0x241b/0x3e60 [btrfs]
   do_vfs_ioctl+0x831/0xb10

[CAUSE]
All these call sites are only relying on root->reloc_root, which can
undergo btrfs_drop_snapshot(), and since we don't have real refcount
based protection to reloc roots, we can reach already dropped reloc
root, triggering KASAN.

[FIX]
To avoid such access to unstable root->reloc_root, we should check
BTRFS_ROOT_DEAD_RELOC_TREE bit first.

This patch introduces wrappers that provide the correct way to check the
bit with memory barriers protection.

Most callers don't distinguish merged reloc tree and no reloc tree.  The
only exception is should_ignore_root(), as merged reloc tree can be
ignored, while no reloc tree shouldn't.

[CRITICAL SECTION ANALYSIS]
Although test_bit()/set_bit()/clear_bit() doesn't imply a barrier, the
DEAD_RELOC_TREE bit has extra help from transaction as a higher level
barrier, the lifespan of root::reloc_root and DEAD_RELOC_TREE bit are:

	NULL: reloc_root is NULL	PTR: reloc_root is not NULL
	0: DEAD_RELOC_ROOT bit not set	DEAD: DEAD_RELOC_ROOT bit set

	(NULL, 0)    Initial state		 __
	  |					 /\ Section A
        btrfs_init_reloc_root()			 \/
	  |				 	 __
	(PTR, 0)     reloc_root initialized      /\
          |					 |
	btrfs_update_reloc_root()		 |  Section B
          |					 |
	(PTR, DEAD)  reloc_root has been merged  \/
          |					 __
	=== btrfs_commit_transaction() ====================
	  |					 /\
	clean_dirty_subvols()			 |
	  |					 |  Section C
	(NULL, DEAD) reloc_root cleanup starts   \/
          |					 __
	btrfs_drop_snapshot()			 /\
	  |					 |  Section D
	(NULL, 0)    Back to initial state	 \/

Every have_reloc_root() or test_bit(DEAD_RELOC_ROOT) caller holds
transaction handle, so none of such caller can cross transaction boundary.

In Section A, every caller just found no DEAD bit, and grab reloc_root.

In the cross section A-B, caller may get no DEAD bit, but since reloc_root
is still completely valid thus accessing reloc_root is completely safe.

No test_bit() caller can cross the boundary of Section B and Section C.

In Section C, every caller found the DEAD bit, so no one will access
reloc_root.

In the cross section C-D, either caller gets the DEAD bit set, avoiding
access reloc_root no matter if it's safe or not.  Or caller get the DEAD
bit cleared, then access reloc_root, which is already NULL, nothing will
be wrong.

The memory write barriers are between the reloc_root updates and bit
set/clear, the pairing read side is before test_bit.

Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Fixes: d2311e698578 ("btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots")
CC: stable@vger.kernel.org # 5.4+
Suggested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ barriers ]
Signed-off-by: David Sterba <dsterba@suse.com>
---
 fs/btrfs/relocation.c | 51 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 5 deletions(-)

diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index af4dd49a71c7..995d4b8b1cfd 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -517,6 +517,34 @@ static int update_backref_cache(struct btrfs_trans_handle *trans,
 	return 1;
 }
 
+static bool reloc_root_is_dead(struct btrfs_root *root)
+{
+	/*
+	 * Pair with set_bit/clear_bit in clean_dirty_subvols and
+	 * btrfs_update_reloc_root. We need to see the updated bit before
+	 * trying to access reloc_root
+	 */
+	smp_rmb();
+	if (test_bit(BTRFS_ROOT_DEAD_RELOC_TREE, &root->state))
+		return true;
+	return false;
+}
+
+/*
+ * Check if this subvolume tree has valid reloc tree.
+ *
+ * Reloc tree after swap is considered dead, thus not considered as valid.
+ * This is enough for most callers, as they don't distinguish dead reloc root
+ * from no reloc root.  But should_ignore_root() below is a special case.
+ */
+static bool have_reloc_root(struct btrfs_root *root)
+{
+	if (reloc_root_is_dead(root))
+		return false;
+	if (!root->reloc_root)
+		return false;
+	return true;
+}
 
 static int should_ignore_root(struct btrfs_root *root)
 {
@@ -525,6 +553,10 @@ static int should_ignore_root(struct btrfs_root *root)
 	if (!test_bit(BTRFS_ROOT_REF_COWS, &root->state))
 		return 0;
 
+	/* This root has been merged with its reloc tree, we can ignore it */
+	if (reloc_root_is_dead(root))
+		return 1;
+
 	reloc_root = root->reloc_root;
 	if (!reloc_root)
 		return 0;
@@ -1439,7 +1471,7 @@ int btrfs_init_reloc_root(struct btrfs_trans_handle *trans,
 	 * The subvolume has reloc tree but the swap is finished, no need to
 	 * create/update the dead reloc tree
 	 */
-	if (test_bit(BTRFS_ROOT_DEAD_RELOC_TREE, &root->state))
+	if (reloc_root_is_dead(root))
 		return 0;
 
 	if (root->reloc_root) {
@@ -1478,8 +1510,7 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
 	struct btrfs_root_item *root_item;
 	int ret;
 
-	if (test_bit(BTRFS_ROOT_DEAD_RELOC_TREE, &root->state) ||
-	    !root->reloc_root)
+	if (!have_reloc_root(root))
 		goto out;
 
 	reloc_root = root->reloc_root;
@@ -1489,6 +1520,11 @@ int btrfs_update_reloc_root(struct btrfs_trans_handle *trans,
 	if (fs_info->reloc_ctl->merge_reloc_tree &&
 	    btrfs_root_refs(root_item) == 0) {
 		set_bit(BTRFS_ROOT_DEAD_RELOC_TREE, &root->state);
+		/*
+		 * Mark the tree as dead before we change reloc_root so
+		 * have_reloc_root will not touch it from now on.
+		 */
+		smp_wmb();
 		__del_reloc_root(reloc_root);
 	}
 
@@ -2201,6 +2237,11 @@ static int clean_dirty_subvols(struct reloc_control *rc)
 				if (ret2 < 0 && !ret)
 					ret = ret2;
 			}
+			/*
+			 * Need barrier to ensure clear_bit() only happens after
+			 * root->reloc_root = NULL. Pairs with have_reloc_root.
+			 */
+			smp_wmb();
 			clear_bit(BTRFS_ROOT_DEAD_RELOC_TREE, &root->state);
 			btrfs_put_fs_root(root);
 		} else {
@@ -4730,7 +4771,7 @@ void btrfs_reloc_pre_snapshot(struct btrfs_pending_snapshot *pending,
 	struct btrfs_root *root = pending->root;
 	struct reloc_control *rc = root->fs_info->reloc_ctl;
 
-	if (!root->reloc_root || !rc)
+	if (!rc || !have_reloc_root(root))
 		return;
 
 	if (!rc->merge_reloc_tree)
@@ -4764,7 +4805,7 @@ int btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans,
 	struct reloc_control *rc = root->fs_info->reloc_ctl;
 	int ret;
 
-	if (!root->reloc_root || !rc)
+	if (!rc || !have_reloc_root(root))
 		return 0;
 
 	rc = root->fs_info->reloc_ctl;
-- 
2.24.0


             reply	other threads:[~2020-01-13 19:16 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-13 19:16 David Sterba [this message]
2020-01-13 20:44 ` [PATCH] btrfs: relocation: fix reloc_root lifespan and access Josef Bacik
2020-01-14  1:17 ` Qu WenRuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200113191617.3542-1-dsterba@suse.com \
    --to=dsterba@suse.com \
    --cc=ce3g8jdj@umail.furryterror.org \
    --cc=josef@toxicpanda.com \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=nborisov@suse.com \
    --cc=stable@vger.kernel.org \
    --cc=wqu@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).