[PATCH AUTOSEL 4.14 01/10] drm/bridge: dw-hdmi: fix AVI frame colorimetry

[PATCH AUTOSEL 4.14 01/10] drm/bridge: dw-hdmi: fix AVI frame colorimetry

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit e8dca30f7118461d47e1c3510d0e31b277439151 ]

CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 46 +++++++++++++----------
 1 file changed, 26 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index cc1094f901255..96cf64d0ee824 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1348,28 +1348,34 @@ static void hdmi_config_AVI(struct dw_hdmi *hdmi, struct drm_display_mode *mode)
 		frame.colorspace = HDMI_COLORSPACE_RGB;
 
 	/* Set up colorimetry */
-	switch (hdmi->hdmi_data.enc_out_encoding) {
-	case V4L2_YCBCR_ENC_601:
-		if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
-			frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
-		else
+	if (!hdmi_bus_fmt_is_rgb(hdmi->hdmi_data.enc_out_bus_format)) {
+		switch (hdmi->hdmi_data.enc_out_encoding) {
+		case V4L2_YCBCR_ENC_601:
+			if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV601)
+				frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+			else
+				frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+			break;
+		case V4L2_YCBCR_ENC_709:
+			if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
+				frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
+			else
+				frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
+			break;
+		default: /* Carries no data */
 			frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
+			frame.extended_colorimetry =
+					HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
+			break;
+		}
+	} else {
+		frame.colorimetry = HDMI_COLORIMETRY_NONE;
 		frame.extended_colorimetry =
-				HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
-		break;
-	case V4L2_YCBCR_ENC_709:
-		if (hdmi->hdmi_data.enc_in_encoding == V4L2_YCBCR_ENC_XV709)
-			frame.colorimetry = HDMI_COLORIMETRY_EXTENDED;
-		else
-			frame.colorimetry = HDMI_COLORIMETRY_ITU_709;
-		frame.extended_colorimetry =
-				HDMI_EXTENDED_COLORIMETRY_XV_YCC_709;
-		break;
-	default: /* Carries no data */
-		frame.colorimetry = HDMI_COLORIMETRY_ITU_601;
-		frame.extended_colorimetry =
-				HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
-		break;
+			HDMI_EXTENDED_COLORIMETRY_XV_YCC_601;
 	}
 
 	frame.scan_mode = HDMI_SCAN_MODE_NONE;
-- 
2.20.1

[PATCH AUTOSEL 4.14 02/10] ALSA: hda/realtek: Fix pop noise on ALC225

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757 ]

Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.

So partially revert this commit for ALC225 to fix the regression.

Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_realtek.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5a7afbeb612d5..e5d4765a182b5 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -7265,6 +7265,8 @@ static int patch_alc269(struct hda_codec *codec)
 		spec->gen.mixer_nid = 0;
 		break;
 	case 0x10ec0225:
+		codec->power_save_node = 1;
+		/* fall through */
 	case 0x10ec0295:
 		spec->codec_variant = ALC269_TYPE_ALC225;
 		spec->gen.mixer_nid = 0; /* no loopback on ALC225 ALC295 */
-- 
2.20.1

[PATCH AUTOSEL 4.14 03/10] drm/bochs: downgrade pci_request_region failure from error to warning

[Sasha Levin]

From: Gerd Hoffmann <kraxel@redhat.com>

[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ]

Shutdown of firmware framebuffer has a bunch of problems.  Because
of this the framebuffer region might still be reserved even after
drm_fb_helper_remove_conflicting_pci_framebuffers() returned.

Don't consider pci_request_region() failure for the framebuffer
region as fatal error to workaround this issue.

Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bochs/bochs_hw.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bochs/bochs_hw.c b/drivers/gpu/drm/bochs/bochs_hw.c
index a39b0343c197d..401c218567af9 100644
--- a/drivers/gpu/drm/bochs/bochs_hw.c
+++ b/drivers/gpu/drm/bochs/bochs_hw.c
@@ -97,10 +97,8 @@ int bochs_hw_init(struct drm_device *dev, uint32_t flags)
 		size = min(size, mem);
 	}
 
-	if (pci_request_region(pdev, 0, "bochs-drm") != 0) {
-		DRM_ERROR("Cannot request framebuffer\n");
-		return -EBUSY;
-	}
+	if (pci_request_region(pdev, 0, "bochs-drm") != 0)
+		DRM_WARN("Cannot request framebuffer, boot fb still active?\n");
 
 	bochs->fb_map = ioremap(addr, size);
 	if (bochs->fb_map == NULL) {
-- 
2.20.1

[PATCH AUTOSEL 4.14 04/10] initramfs: restore default compression behavior

[Sasha Levin]

From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

[ Upstream commit 785d74ec3bbf26ac7f6e92e6e96a259aec0f107a ]

Even though INITRAMFS_SOURCE kconfig option isn't set in most of
defconfigs it is used (set) extensively by various build systems.
Commit f26661e12765 ("initramfs: make initramfs compression choice
non-optional") has changed default compression mode. Previously we
compress initramfs using available compression algorithm. Now
we don't use any compression at all by default.
It significantly increases the image size in case of build system
chooses embedded initramfs. Initially I faced with this issue while
using buildroot.

As of today it's not possible to set preferred compression mode
in target defconfig as this option depends on INITRAMFS_SOURCE
being set. Modification of all build systems either doesn't look
like good option.

Let's instead rewrite initramfs compression mode choices list
the way that "INITRAMFS_COMPRESSION_NONE" will be the last option
in the list. In that case it will be chosen only if all other
options (which implements any compression) are not available.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 usr/Kconfig | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/usr/Kconfig b/usr/Kconfig
index 43658b8a975e5..8b4826de1189f 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -131,17 +131,6 @@ choice
 
 	  If in doubt, select 'None'
 
-config INITRAMFS_COMPRESSION_NONE
-	bool "None"
-	help
-	  Do not compress the built-in initramfs at all. This may sound wasteful
-	  in space, but, you should be aware that the built-in initramfs will be
-	  compressed at a later stage anyways along with the rest of the kernel,
-	  on those architectures that support this. However, not compressing the
-	  initramfs may lead to slightly higher memory consumption during a
-	  short time at boot, while both the cpio image and the unpacked
-	  filesystem image will be present in memory simultaneously
-
 config INITRAMFS_COMPRESSION_GZIP
 	bool "Gzip"
 	depends on RD_GZIP
@@ -214,6 +203,17 @@ config INITRAMFS_COMPRESSION_LZ4
 	  If you choose this, keep in mind that most distros don't provide lz4
 	  by default which could cause a build failure.
 
+config INITRAMFS_COMPRESSION_NONE
+	bool "None"
+	help
+	  Do not compress the built-in initramfs at all. This may sound wasteful
+	  in space, but, you should be aware that the built-in initramfs will be
+	  compressed at a later stage anyways along with the rest of the kernel,
+	  on those architectures that support this. However, not compressing the
+	  initramfs may lead to slightly higher memory consumption during a
+	  short time at boot, while both the cpio image and the unpacked
+	  filesystem image will be present in memory simultaneously
+
 endchoice
 
 config INITRAMFS_COMPRESSION
-- 
2.20.1

[PATCH AUTOSEL 4.14 05/10] staging: greybus: loopback_test: fix potential path truncation

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit f16023834863932f95dfad13fac3fc47f77d2f29 ]

Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).

loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
  651 |   snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
      |                               ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
  651 |   snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix this by making sure the buffer is large enough the concatenated
strings.

Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/tools/loopback_test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c
index fbe589fca8408..ddea50523d562 100644
--- a/drivers/staging/greybus/tools/loopback_test.c
+++ b/drivers/staging/greybus/tools/loopback_test.c
@@ -644,7 +644,7 @@ int find_loopback_devices(struct loopback_test *t)
 static int open_poll_files(struct loopback_test *t)
 {
 	struct loopback_device *dev;
-	char buf[MAX_STR_LEN];
+	char buf[MAX_SYSFS_PATH + MAX_STR_LEN];
 	char dummy;
 	int fds_idx = 0;
 	int i;
-- 
2.20.1

[PATCH AUTOSEL 4.14 06/10] staging: greybus: loopback_test: fix potential path truncations

[Sasha Levin]

From: Johan Hovold <johan@kernel.org>

[ Upstream commit ae62cf5eb2792d9a818c2d93728ed92119357017 ]

Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.

	snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);

	snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
		 t->sysfs_prefix, d->name);

	snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
		 t->debugfs_prefix, d->name);

Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.

Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.

Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/greybus/tools/loopback_test.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/staging/greybus/tools/loopback_test.c b/drivers/staging/greybus/tools/loopback_test.c
index ddea50523d562..b6aa70b94f335 100644
--- a/drivers/staging/greybus/tools/loopback_test.c
+++ b/drivers/staging/greybus/tools/loopback_test.c
@@ -20,6 +20,7 @@
 #include <signal.h>
 
 #define MAX_NUM_DEVICES 10
+#define MAX_SYSFS_PREFIX 0x80
 #define MAX_SYSFS_PATH	0x200
 #define CSV_MAX_LINE	0x1000
 #define SYSFS_MAX_INT	0x20
@@ -68,7 +69,7 @@ struct loopback_results {
 };
 
 struct loopback_device {
-	char name[MAX_SYSFS_PATH];
+	char name[MAX_STR_LEN];
 	char sysfs_entry[MAX_SYSFS_PATH];
 	char debugfs_entry[MAX_SYSFS_PATH];
 	struct loopback_results results;
@@ -94,8 +95,8 @@ struct loopback_test {
 	int stop_all;
 	int poll_count;
 	char test_name[MAX_STR_LEN];
-	char sysfs_prefix[MAX_SYSFS_PATH];
-	char debugfs_prefix[MAX_SYSFS_PATH];
+	char sysfs_prefix[MAX_SYSFS_PREFIX];
+	char debugfs_prefix[MAX_SYSFS_PREFIX];
 	struct timespec poll_timeout;
 	struct loopback_device devices[MAX_NUM_DEVICES];
 	struct loopback_results aggregate_results;
@@ -914,10 +915,10 @@ int main(int argc, char *argv[])
 			t.iteration_max = atoi(optarg);
 			break;
 		case 'S':
-			snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", optarg);
+			snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg);
 			break;
 		case 'D':
-			snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", optarg);
+			snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", optarg);
 			break;
 		case 'm':
 			t.mask = atol(optarg);
@@ -968,10 +969,10 @@ int main(int argc, char *argv[])
 	}
 
 	if (!strcmp(t.sysfs_prefix, ""))
-		snprintf(t.sysfs_prefix, MAX_SYSFS_PATH, "%s", sysfs_prefix);
+		snprintf(t.sysfs_prefix, MAX_SYSFS_PREFIX, "%s", sysfs_prefix);
 
 	if (!strcmp(t.debugfs_prefix, ""))
-		snprintf(t.debugfs_prefix, MAX_SYSFS_PATH, "%s", debugfs_prefix);
+		snprintf(t.debugfs_prefix, MAX_SYSFS_PREFIX, "%s", debugfs_prefix);
 
 	ret = find_loopback_devices(&t);
 	if (ret)
-- 
2.20.1

[PATCH AUTOSEL 4.14 07/10] tools/power turbostat: Fix gcc build warnings

[Sasha Levin]

From: Len Brown <len.brown@intel.com>

[ Upstream commit d8d005ba6afa502ca37ced5782f672c4d2fc1515 ]

Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
	[-Wstringop-truncation]

reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 19e345cf8193e..0692f2efc25ef 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -4650,9 +4650,9 @@ int add_counter(unsigned int msr_num, char *path, char *name,
 	}
 
 	msrp->msr_num = msr_num;
-	strncpy(msrp->name, name, NAME_BYTES);
+	strncpy(msrp->name, name, NAME_BYTES - 1);
 	if (path)
-		strncpy(msrp->path, path, PATH_BYTES);
+		strncpy(msrp->path, path, PATH_BYTES - 1);
 	msrp->width = width;
 	msrp->type = type;
 	msrp->format = format;
-- 
2.20.1

[PATCH AUTOSEL 4.14 08/10] ALSA: pcm: oss: Avoid plugin buffer overflow

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit f2ecf903ef06eb1bbbfa969db9889643d487e73a ]

Each OSS PCM plugins allocate its internal buffer per pre-calculation
of the max buffer size through the chain of plugins (calling
src_frames and dst_frames callbacks).  This works for most plugins,
but the rate plugin might behave incorrectly.  The calculation in the
rate plugin involves with the fractional position, i.e. it may vary
depending on the input position.  Since the buffer size
pre-calculation is always done with the offset zero, it may return a
shorter size than it might be; this may result in the out-of-bound
access as spotted by fuzzer.

This patch addresses those possible buffer overflow accesses by simply
setting the upper limit per the given buffer size for each plugin
before src_frames() and after dst_frames() calls.

Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com
Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_plugin.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c
index b8ab46b8298de..6583eb411f82a 100644
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -209,6 +209,8 @@ snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *plug, snd_p
 	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin && drv_frames > 0) {
+			if (drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames)
 				drv_frames = plugin->src_frames(plugin, drv_frames);
@@ -220,6 +222,8 @@ snd_pcm_sframes_t snd_pcm_plug_client_size(struct snd_pcm_substream *plug, snd_p
 			plugin_next = plugin->next;
 			if (plugin->dst_frames)
 				drv_frames = plugin->dst_frames(plugin, drv_frames);
+			if (drv_frames > plugin->buf_frames)
+				drv_frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else
@@ -248,11 +252,15 @@ snd_pcm_sframes_t snd_pcm_plug_slave_size(struct snd_pcm_substream *plug, snd_pc
 				if (frames < 0)
 					return frames;
 			}
+			if (frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			plugin = plugin_next;
 		}
 	} else if (stream == SNDRV_PCM_STREAM_CAPTURE) {
 		plugin = snd_pcm_plug_last(plug);
 		while (plugin) {
+			if (frames > plugin->buf_frames)
+				frames = plugin->buf_frames;
 			plugin_prev = plugin->prev;
 			if (plugin->src_frames) {
 				frames = plugin->src_frames(plugin, frames);
-- 
2.20.1

[PATCH AUTOSEL 4.14 09/10] ALSA: line6: Fix endless MIDI read loop

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit d683469b3c93d7e2afd39e6e1970f24700eb7a68 ]

The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination.  Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly.  This would lead to the
unexpected behavior as well.

This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.

The bug was reported by syzkaller.

Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com
Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/line6/driver.c  | 2 +-
 sound/usb/line6/midibuf.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
index b223de3defc4f..bf4eacc53a7d2 100644
--- a/sound/usb/line6/driver.c
+++ b/sound/usb/line6/driver.c
@@ -313,7 +313,7 @@ static void line6_data_received(struct urb *urb)
 				line6_midibuf_read(mb, line6->buffer_message,
 						LINE6_MIDI_MESSAGE_MAXLEN);
 
-			if (done == 0)
+			if (done <= 0)
 				break;
 
 			line6->message_length = done;
diff --git a/sound/usb/line6/midibuf.c b/sound/usb/line6/midibuf.c
index 36a610ba342ec..c931d48801ebe 100644
--- a/sound/usb/line6/midibuf.c
+++ b/sound/usb/line6/midibuf.c
@@ -163,7 +163,7 @@ int line6_midibuf_read(struct midi_buffer *this, unsigned char *data,
 			int midi_length_prev =
 			    midibuf_message_length(this->command_prev);
 
-			if (midi_length_prev > 0) {
+			if (midi_length_prev > 1) {
 				midi_length = midi_length_prev - 1;
 				repeat = 1;
 			} else
-- 
2.20.1

[PATCH AUTOSEL 4.14 10/10] ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 5461e0530c222129dfc941058be114b5cbc00837 ]

The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig.  But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that.  As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.

Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_plugin.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c
index 6583eb411f82a..40d2d39151bfb 100644
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -111,7 +111,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t frames)
 		while (plugin->next) {
 			if (plugin->dst_frames)
 				frames = plugin->dst_frames(plugin, frames);
-			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+			if ((snd_pcm_sframes_t)frames <= 0)
 				return -ENXIO;
 			plugin = plugin->next;
 			err = snd_pcm_plugin_alloc(plugin, frames);
@@ -123,7 +123,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t frames)
 		while (plugin->prev) {
 			if (plugin->src_frames)
 				frames = plugin->src_frames(plugin, frames);
-			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
+			if ((snd_pcm_sframes_t)frames <= 0)
 				return -ENXIO;
 			plugin = plugin->prev;
 			err = snd_pcm_plugin_alloc(plugin, frames);
-- 
2.20.1