[PATCH 5.4 00/19] 5.4.55-rc1 review

[PATCH 5.4 00/19] 5.4.55-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.55 release.
There are 19 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.55-rc1

Vladimir Oltean <vladimir.oltean@nxp.com>
    Revert "dpaa_eth: fix usage as DSA master, try 3"

zhuguangqing <zhuguangqing@xiaomi.com>
    PM: wakeup: Show statistics for deleted wakeup sources again

Peng Fan <peng.fan@nxp.com>
    regmap: debugfs: check count when read regmap file

Kuniyuki Iwashima <kuniyu@amazon.co.jp>
    udp: Improve load balancing for SO_REUSEPORT.

Kuniyuki Iwashima <kuniyu@amazon.co.jp>
    udp: Copy has_conns in reuseport_grow().

Xin Long <lucien.xin@gmail.com>
    sctp: shrink stream outq when fails to do addstream reconf

Xin Long <lucien.xin@gmail.com>
    sctp: shrink stream outq only when new outcnt < old outcnt

Dan Carpenter <dan.carpenter@oracle.com>
    AX.25: Prevent integer overflows in connect and sendmsg

Yuchung Cheng <ycheng@google.com>
    tcp: allow at most one TLP probe per flight

David Howells <dhowells@redhat.com>
    rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA

Weilong Chen <chenweilong@huawei.com>
    rtnetlink: Fix memory(net_device) leak when ->newlink fails

Cong Wang <xiyou.wangcong@gmail.com>
    qrtr: orphan socket in qrtr_release()

Miaohe Lin <linmiaohe@huawei.com>
    net: udp: Fix wrong clean up for IS_UDPLITE macro

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    net-sysfs: add a newline when printing 'tx_timeout' by sysfs

Wei Yongjun <weiyongjun1@huawei.com>
    ip6_gre: fix null-ptr-deref in ip6gre_init_net()

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/x25_asy: Fix to make it work

Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
    dev: Defer free of skbs in flush_backlog

Peilin Ye <yepeilin.cs@gmail.com>
    AX.25: Prevent out-of-bounds read in ax25_sendmsg()

Peilin Ye <yepeilin.cs@gmail.com>
    AX.25: Fix out-of-bounds read in ax25_connect()


-------------

Diffstat:

 Makefile                                       |  4 ++--
 drivers/base/power/wakeup.c                    |  3 +++
 drivers/base/regmap/regmap-debugfs.c           |  6 ++++++
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |  2 +-
 drivers/net/wan/x25_asy.c                      | 21 +++++++++++++-------
 include/linux/tcp.h                            |  4 +++-
 net/ax25/af_ax25.c                             | 10 ++++++++--
 net/core/dev.c                                 |  2 +-
 net/core/net-sysfs.c                           |  2 +-
 net/core/rtnetlink.c                           |  3 ++-
 net/core/sock_reuseport.c                      |  1 +
 net/ipv4/tcp_input.c                           | 11 ++++++-----
 net/ipv4/tcp_output.c                          | 13 ++++++++-----
 net/ipv4/udp.c                                 | 17 +++++++++-------
 net/ipv6/ip6_gre.c                             | 11 ++++++-----
 net/ipv6/udp.c                                 | 17 +++++++++-------
 net/qrtr/qrtr.c                                |  1 +
 net/rxrpc/recvmsg.c                            |  2 +-
 net/rxrpc/sendmsg.c                            |  2 +-
 net/sctp/stream.c                              | 27 +++++++++++++++++---------
 20 files changed, 103 insertions(+), 56 deletions(-)

[PATCH 5.4 01/19] AX.25: Fix out-of-bounds read in ax25_connect()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit 2f2a7ffad5c6cbf3d438e813cfdc88230e185ba6 ]

Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.

This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().

It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.

Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1187,7 +1187,9 @@ static int __must_check ax25_connect(str
 	if (addr_len > sizeof(struct sockaddr_ax25) &&
 	    fsa->fsa_ax25.sax25_ndigis != 0) {
 		/* Valid number of digipeaters ? */
-		if (fsa->fsa_ax25.sax25_ndigis < 1 || fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS) {
+		if (fsa->fsa_ax25.sax25_ndigis < 1 ||
+		    addr_len < sizeof(struct sockaddr_ax25) +
+		    sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) {
 			err = -EINVAL;
 			goto out_release;
 		}

[PATCH 5.4 02/19] AX.25: Prevent out-of-bounds read in ax25_sendmsg()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit 8885bb0621f01a6c82be60a91e5fc0f6e2f71186 ]

Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.

It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1509,7 +1509,8 @@ static int ax25_sendmsg(struct socket *s
 			struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
 
 			/* Valid number of digipeaters ? */
-			if (usax->sax25_ndigis < 1 || usax->sax25_ndigis > AX25_MAX_DIGIS) {
+			if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) +
+			    sizeof(ax25_address) * usax->sax25_ndigis) {
 				err = -EINVAL;
 				goto out;
 			}

[PATCH 5.4 03/19] dev: Defer free of skbs in flush_backlog

[Greg Kroah-Hartman]

From: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>

[ Upstream commit 7df5cb75cfb8acf96c7f2342530eb41e0c11f4c3 ]

IRQs are disabled when freeing skbs in input queue.
Use the IRQ safe variant to free skbs here.

Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5229,7 +5229,7 @@ static void flush_backlog(struct work_st
 	skb_queue_walk_safe(&sd->input_pkt_queue, skb, tmp) {
 		if (skb->dev->reg_state == NETREG_UNREGISTERING) {
 			__skb_unlink(skb, &sd->input_pkt_queue);
-			kfree_skb(skb);
+			dev_kfree_skb_irq(skb);
 			input_queue_head_incr(sd);
 		}
 	}

[PATCH 5.4 04/19] drivers/net/wan/x25_asy: Fix to make it work

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]

This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.

When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.

The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.

Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/x25_asy.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -183,7 +183,7 @@ static inline void x25_asy_unlock(struct
 	netif_wake_queue(sl->dev);
 }
 
-/* Send one completely decapsulated IP datagram to the IP layer. */
+/* Send an LAPB frame to the LAPB module to process. */
 
 static void x25_asy_bump(struct x25_asy *sl)
 {
@@ -195,13 +195,12 @@ static void x25_asy_bump(struct x25_asy
 	count = sl->rcount;
 	dev->stats.rx_bytes += count;
 
-	skb = dev_alloc_skb(count+1);
+	skb = dev_alloc_skb(count);
 	if (skb == NULL) {
 		netdev_warn(sl->dev, "memory squeeze, dropping packet\n");
 		dev->stats.rx_dropped++;
 		return;
 	}
-	skb_push(skb, 1);	/* LAPB internal control */
 	skb_put_data(skb, sl->rbuff, count);
 	skb->protocol = x25_type_trans(skb, sl->dev);
 	err = lapb_data_received(skb->dev, skb);
@@ -209,7 +208,6 @@ static void x25_asy_bump(struct x25_asy
 		kfree_skb(skb);
 		printk(KERN_DEBUG "x25_asy: data received err - %d\n", err);
 	} else {
-		netif_rx(skb);
 		dev->stats.rx_packets++;
 	}
 }
@@ -356,12 +354,21 @@ static netdev_tx_t x25_asy_xmit(struct s
  */
 
 /*
- *	Called when I frame data arrives. We did the work above - throw it
- *	at the net layer.
+ *	Called when I frame data arrive. We add a pseudo header for upper
+ *	layers and pass it to upper layers.
  */
 
 static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb)
 {
+	if (skb_cow(skb, 1)) {
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+	skb_push(skb, 1);
+	skb->data[0] = X25_IFACE_DATA;
+
+	skb->protocol = x25_type_trans(skb, dev);
+
 	return netif_rx(skb);
 }
 
@@ -657,7 +664,7 @@ static void x25_asy_unesc(struct x25_asy
 	switch (s) {
 	case X25_END:
 		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
-		    sl->rcount > 2)
+		    sl->rcount >= 2)
 			x25_asy_bump(sl);
 		clear_bit(SLF_ESCAPE, &sl->flags);
 		sl->rcount = 0;

[PATCH 5.4 05/19] ip6_gre: fix null-ptr-deref in ip6gre_init_net()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 46ef5b89ec0ecf290d74c4aee844f063933c4da4 ]

KASAN report null-ptr-deref error when register_netdev() failed:

KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
 ip6gre_init_net+0x4ab/0x580
 ? ip6gre_tunnel_uninit+0x3f0/0x3f0
 ops_init+0xa8/0x3c0
 setup_net+0x2de/0x7e0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? ops_init+0x3c0/0x3c0
 ? kasan_unpoison_shadow+0x33/0x40
 ? __kasan_kmalloc.constprop.0+0xc2/0xd0
 copy_net_ns+0x27d/0x530
 create_new_namespaces+0x382/0xa30
 unshare_nsproxy_namespaces+0xa1/0x1d0
 ksys_unshare+0x39c/0x780
 ? walk_process_tree+0x2a0/0x2a0
 ? trace_hardirqs_on+0x4a/0x1b0
 ? _raw_spin_unlock_irq+0x1f/0x30
 ? syscall_trace_enter+0x1a7/0x330
 ? do_syscall_64+0x1c/0xa0
 __x64_sys_unshare+0x2d/0x40
 do_syscall_64+0x56/0xa0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.

Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_gre.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1560,17 +1560,18 @@ static void ip6gre_destroy_tunnels(struc
 static int __net_init ip6gre_init_net(struct net *net)
 {
 	struct ip6gre_net *ign = net_generic(net, ip6gre_net_id);
+	struct net_device *ndev;
 	int err;
 
 	if (!net_has_fallback_tunnels(net))
 		return 0;
-	ign->fb_tunnel_dev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0",
-					  NET_NAME_UNKNOWN,
-					  ip6gre_tunnel_setup);
-	if (!ign->fb_tunnel_dev) {
+	ndev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0",
+			    NET_NAME_UNKNOWN, ip6gre_tunnel_setup);
+	if (!ndev) {
 		err = -ENOMEM;
 		goto err_alloc_dev;
 	}
+	ign->fb_tunnel_dev = ndev;
 	dev_net_set(ign->fb_tunnel_dev, net);
 	/* FB netdevice is special: we have one, and only one per netns.
 	 * Allowing to move it to another netns is clearly unsafe.
@@ -1590,7 +1591,7 @@ static int __net_init ip6gre_init_net(st
 	return 0;
 
 err_reg_dev:
-	free_netdev(ign->fb_tunnel_dev);
+	free_netdev(ndev);
 err_alloc_dev:
 	return err;
 }

[PATCH 5.4 06/19] net-sysfs: add a newline when printing tx_timeout by sysfs

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit 9bb5fbea59f36a589ef886292549ca4052fe676c ]

When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.

root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1036,7 +1036,7 @@ static ssize_t tx_timeout_show(struct ne
 	trans_timeout = queue->trans_timeout;
 	spin_unlock_irq(&queue->_xmit_lock);
 
-	return sprintf(buf, "%lu", trans_timeout);
+	return sprintf(buf, fmt_ulong, trans_timeout);
 }
 
 static unsigned int get_netdev_queue_index(struct netdev_queue *queue)

[PATCH 5.4 07/19] net: udp: Fix wrong clean up for IS_UDPLITE macro

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

[ Upstream commit b0a422772fec29811e293c7c0e6f991c0fd9241d ]

We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.

Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |    2 +-
 net/ipv6/udp.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -2045,7 +2045,7 @@ static int udp_queue_rcv_one_skb(struct
 	/*
 	 * 	UDP-Lite specific tests, ignored on UDP sockets
 	 */
-	if ((is_udplite & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
+	if ((up->pcflag & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
 
 		/*
 		 * MIB statistics other than incrementing the error count are
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -643,7 +643,7 @@ static int udpv6_queue_rcv_one_skb(struc
 	/*
 	 * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c).
 	 */
-	if ((is_udplite & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
+	if ((up->pcflag & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
 
 		if (up->pcrlen == 0) {          /* full coverage was set  */
 			net_dbg_ratelimited("UDPLITE6: partial coverage %d while full coverage %d requested\n",

[PATCH 5.4 08/19] qrtr: orphan socket in qrtr_release()

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit af9f691f0f5bdd1ade65a7b84927639882d7c3e5 ]

We have to detach sock from socket in qrtr_release(),
otherwise skb->sk may still reference to this socket
when the skb is released in tun->queue, particularly
sk->sk_wq still points to &sock->wq, which leads to
a UAF.

Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com
Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/qrtr/qrtr.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -1004,6 +1004,7 @@ static int qrtr_release(struct socket *s
 		sk->sk_state_change(sk);
 
 	sock_set_flag(sk, SOCK_DEAD);
+	sock_orphan(sk);
 	sock->sk = NULL;
 
 	if (!sock_flag(sk, SOCK_ZAPPED))

[PATCH 5.4 09/19] rtnetlink: Fix memory(net_device) leak when ->newlink fails

[Greg Kroah-Hartman]

From: Weilong Chen <chenweilong@huawei.com>

[ Upstream commit cebb69754f37d68e1355a5e726fdac317bcda302 ]

When vlan_newlink call register_vlan_dev fails, it might return error
with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should
free the memory. But currently rtnl_newlink only free the memory which
state is NETREG_UNINITIALIZED.

BUG: memory leak
unreferenced object 0xffff8881051de000 (size 4096):
  comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s)
  hex dump (first 32 bytes):
    76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00  vlan2...........
    00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00  .E(.............
  backtrace:
    [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline]
    [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574
    [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline]
    [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline]
    [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929
    [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067
    [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329
    [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397
    [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460
    [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469
    [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
    [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329
    [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918
    [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline]
    [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672
    [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352
    [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406
    [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439
    [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359
    [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/rtnetlink.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3231,7 +3231,8 @@ replay:
 		 */
 		if (err < 0) {
 			/* If device is not registered at all, free it now */
-			if (dev->reg_state == NETREG_UNINITIALIZED)
+			if (dev->reg_state == NETREG_UNINITIALIZED ||
+			    dev->reg_state == NETREG_UNREGISTERED)
 				free_netdev(dev);
 			goto out;
 		}

[PATCH 5.4 10/19] rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 639f181f0ee20d3249dbc55f740f0167267180f0 ]

rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.

Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.

Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/recvmsg.c |    2 +-
 net/rxrpc/sendmsg.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/rxrpc/recvmsg.c
+++ b/net/rxrpc/recvmsg.c
@@ -464,7 +464,7 @@ try_again:
 	    list_empty(&rx->recvmsg_q) &&
 	    rx->sk.sk_state != RXRPC_SERVER_LISTENING) {
 		release_sock(&rx->sk);
-		return -ENODATA;
+		return -EAGAIN;
 	}
 
 	if (list_empty(&rx->recvmsg_q)) {
--- a/net/rxrpc/sendmsg.c
+++ b/net/rxrpc/sendmsg.c
@@ -306,7 +306,7 @@ static int rxrpc_send_data(struct rxrpc_
 	/* this should be in poll */
 	sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk);
 
-	if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))
+	if (sk->sk_shutdown & SEND_SHUTDOWN)
 		return -EPIPE;
 
 	more = msg->msg_flags & MSG_MORE;

[PATCH 5.4 11/19] tcp: allow at most one TLP probe per flight

[Greg Kroah-Hartman]

From: Yuchung Cheng <ycheng@google.com>

[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]

Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight.  It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.

The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.

Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/tcp.h   |    4 +++-
 net/ipv4/tcp_input.c  |   11 ++++++-----
 net/ipv4/tcp_output.c |   13 ++++++++-----
 3 files changed, 17 insertions(+), 11 deletions(-)

--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -216,6 +216,8 @@ struct tcp_sock {
 	} rack;
 	u16	advmss;		/* Advertised MSS			*/
 	u8	compressed_ack;
+	u8	tlp_retrans:1,	/* TLP is a retransmission */
+		unused_1:7;
 	u32	chrono_start;	/* Start time in jiffies of a TCP chrono */
 	u32	chrono_stat[3];	/* Time in jiffies for chrono_stat stats */
 	u8	chrono_type:2,	/* current chronograph type */
@@ -238,7 +240,7 @@ struct tcp_sock {
 		save_syn:1,	/* Save headers of SYN packet */
 		is_cwnd_limited:1,/* forward progress limited by snd_cwnd? */
 		syn_smc:1;	/* SYN includes SMC */
-	u32	tlp_high_seq;	/* snd_nxt at the time of TLP retransmit. */
+	u32	tlp_high_seq;	/* snd_nxt at the time of TLP */
 
 	u32	tcp_tx_delay;	/* delay (in usec) added to TX packets */
 	u64	tcp_wstamp_ns;	/* departure time for next sent data packet */
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3505,10 +3505,8 @@ static void tcp_replace_ts_recent(struct
 	}
 }
 
-/* This routine deals with acks during a TLP episode.
- * We mark the end of a TLP episode on receiving TLP dupack or when
- * ack is after tlp_high_seq.
- * Ref: loss detection algorithm in draft-dukkipati-tcpm-tcp-loss-probe.
+/* This routine deals with acks during a TLP episode and ends an episode by
+ * resetting tlp_high_seq. Ref: TLP algorithm in draft-ietf-tcpm-rack
  */
 static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag)
 {
@@ -3517,7 +3515,10 @@ static void tcp_process_tlp_ack(struct s
 	if (before(ack, tp->tlp_high_seq))
 		return;
 
-	if (flag & FLAG_DSACKING_ACK) {
+	if (!tp->tlp_retrans) {
+		/* TLP of new data has been acknowledged */
+		tp->tlp_high_seq = 0;
+	} else if (flag & FLAG_DSACKING_ACK) {
 		/* This DSACK means original and TLP probe arrived; no loss */
 		tp->tlp_high_seq = 0;
 	} else if (after(ack, tp->tlp_high_seq)) {
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2564,6 +2564,11 @@ void tcp_send_loss_probe(struct sock *sk
 	int pcount;
 	int mss = tcp_current_mss(sk);
 
+	/* At most one outstanding TLP */
+	if (tp->tlp_high_seq)
+		goto rearm_timer;
+
+	tp->tlp_retrans = 0;
 	skb = tcp_send_head(sk);
 	if (skb && tcp_snd_wnd_test(tp, skb, mss)) {
 		pcount = tp->packets_out;
@@ -2581,10 +2586,6 @@ void tcp_send_loss_probe(struct sock *sk
 		return;
 	}
 
-	/* At most one outstanding TLP retransmission. */
-	if (tp->tlp_high_seq)
-		goto rearm_timer;
-
 	if (skb_still_in_host_queue(sk, skb))
 		goto rearm_timer;
 
@@ -2606,10 +2607,12 @@ void tcp_send_loss_probe(struct sock *sk
 	if (__tcp_retransmit_skb(sk, skb, 1))
 		goto rearm_timer;
 
+	tp->tlp_retrans = 1;
+
+probe_sent:
 	/* Record snd_nxt for loss detection. */
 	tp->tlp_high_seq = tp->snd_nxt;
 
-probe_sent:
 	NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPLOSSPROBES);
 	/* Reset s.t. tcp_rearm_rto will restart timer from now */
 	inet_csk(sk)->icsk_pending = 0;

[PATCH 5.4 12/19] AX.25: Prevent integer overflows in connect and sendmsg

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 17ad73e941b71f3bec7523ea4e9cbc3752461c2d ]

We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.

Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.

Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1188,6 +1188,7 @@ static int __must_check ax25_connect(str
 	    fsa->fsa_ax25.sax25_ndigis != 0) {
 		/* Valid number of digipeaters ? */
 		if (fsa->fsa_ax25.sax25_ndigis < 1 ||
+		    fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS ||
 		    addr_len < sizeof(struct sockaddr_ax25) +
 		    sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) {
 			err = -EINVAL;
@@ -1509,7 +1510,9 @@ static int ax25_sendmsg(struct socket *s
 			struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
 
 			/* Valid number of digipeaters ? */
-			if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) +
+			if (usax->sax25_ndigis < 1 ||
+			    usax->sax25_ndigis > AX25_MAX_DIGIS ||
+			    addr_len < sizeof(struct sockaddr_ax25) +
 			    sizeof(ax25_address) * usax->sax25_ndigis) {
 				err = -EINVAL;
 				goto out;

[PATCH 5.4 13/19] sctp: shrink stream outq only when new outcnt < old outcnt

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 8f13399db22f909a35735bf8ae2f932e0c8f0e30 ]

It's not necessary to go list_for_each for outq->out_chunk_list
when new outcnt >= old outcnt, as no chunk with higher sid than
new (outcnt - 1) exists in the outqueue.

While at it, also move the list_for_each code in a new function
sctp_stream_shrink_out(), which will be used in the next patch.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/stream.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -22,17 +22,11 @@
 #include <net/sctp/sm.h>
 #include <net/sctp/stream_sched.h>
 
-/* Migrates chunks from stream queues to new stream queues if needed,
- * but not across associations. Also, removes those chunks to streams
- * higher than the new max.
- */
-static void sctp_stream_outq_migrate(struct sctp_stream *stream,
-				     struct sctp_stream *new, __u16 outcnt)
+static void sctp_stream_shrink_out(struct sctp_stream *stream, __u16 outcnt)
 {
 	struct sctp_association *asoc;
 	struct sctp_chunk *ch, *temp;
 	struct sctp_outq *outq;
-	int i;
 
 	asoc = container_of(stream, struct sctp_association, stream);
 	outq = &asoc->outqueue;
@@ -56,6 +50,19 @@ static void sctp_stream_outq_migrate(str
 
 		sctp_chunk_free(ch);
 	}
+}
+
+/* Migrates chunks from stream queues to new stream queues if needed,
+ * but not across associations. Also, removes those chunks to streams
+ * higher than the new max.
+ */
+static void sctp_stream_outq_migrate(struct sctp_stream *stream,
+				     struct sctp_stream *new, __u16 outcnt)
+{
+	int i;
+
+	if (stream->outcnt > outcnt)
+		sctp_stream_shrink_out(stream, outcnt);
 
 	if (new) {
 		/* Here we actually move the old ext stuff into the new

[PATCH 5.4 14/19] sctp: shrink stream outq when fails to do addstream reconf

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 3ecdda3e9ad837cf9cb41b6faa11b1af3a5abc0c ]

When adding a stream with stream reconf, the new stream firstly is in
CLOSED state but new out chunks can still be enqueued. Then once gets
the confirmation from the peer, the state will change to OPEN.

However, if the peer denies, it needs to roll back the stream. But when
doing that, it only sets the stream outcnt back, and the chunks already
in the new stream don't get purged. It caused these chunks can still be
dequeued in sctp_outq_dequeue_data().

As its stream is still in CLOSE, the chunk will be enqueued to the head
again by sctp_outq_head_data(). This chunk will never be sent out, and
the chunks after it can never be dequeued. The assoc will be 'hung' in
a dead loop of sending this chunk.

To fix it, this patch is to purge these chunks already in the new
stream by calling sctp_stream_shrink_out() when failing to do the
addstream reconf.

Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sctp/stream.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/net/sctp/stream.c
+++ b/net/sctp/stream.c
@@ -1045,11 +1045,13 @@ struct sctp_chunk *sctp_process_strreset
 		nums = ntohs(addstrm->number_of_streams);
 		number = stream->outcnt - nums;
 
-		if (result == SCTP_STRRESET_PERFORMED)
+		if (result == SCTP_STRRESET_PERFORMED) {
 			for (i = number; i < stream->outcnt; i++)
 				SCTP_SO(stream, i)->state = SCTP_STREAM_OPEN;
-		else
+		} else {
+			sctp_stream_shrink_out(stream, number);
 			stream->outcnt = number;
+		}
 
 		*evp = sctp_ulpevent_make_stream_change_event(asoc, flags,
 			0, nums, GFP_ATOMIC);

[PATCH 5.4 15/19] udp: Copy has_conns in reuseport_grow().

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.co.jp>

[ Upstream commit f2b2c55e512879a05456eaf5de4d1ed2f7757509 ]

If an unconnected socket in a UDP reuseport group connect()s, has_conns is
set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all
sockets in udp_hslot looking for the connected socket with the highest
score.

However, when the number of sockets bound to the port exceeds max_socks,
reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2()
to return without scanning all sockets, resulting in that packets sent to
connected sockets may be distributed to unconnected sockets.

Therefore, reuseport_grow() should copy has_conns.

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sock_reuseport.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/core/sock_reuseport.c
+++ b/net/core/sock_reuseport.c
@@ -112,6 +112,7 @@ static struct sock_reuseport *reuseport_
 	more_reuse->prog = reuse->prog;
 	more_reuse->reuseport_id = reuse->reuseport_id;
 	more_reuse->bind_inany = reuse->bind_inany;
+	more_reuse->has_conns = reuse->has_conns;
 
 	memcpy(more_reuse->socks, reuse->socks,
 	       reuse->num_socks * sizeof(struct sock *));

[PATCH 5.4 16/19] udp: Improve load balancing for SO_REUSEPORT.

[Greg Kroah-Hartman]

From: Kuniyuki Iwashima <kuniyu@amazon.co.jp>

[ Upstream commit efc6b6f6c3113e8b203b9debfb72d81e0f3dcace ]

Currently, SO_REUSEPORT does not work well if connected sockets are in a
UDP reuseport group.

Then reuseport_has_conns() returns true and the result of
reuseport_select_sock() is discarded. Also, unconnected sockets have the
same score, hence only does the first unconnected socket in udp_hslot
always receive all packets sent to unconnected sockets.

So, the result of reuseport_select_sock() should be used for load
balancing.

The noteworthy point is that the unconnected sockets placed after
connected sockets in sock_reuseport.socks will receive more packets than
others because of the algorithm in reuseport_select_sock().

    index | connected | reciprocal_scale | result
    ---------------------------------------------
    0     | no        | 20%              | 40%
    1     | no        | 20%              | 20%
    2     | yes       | 20%              | 0%
    3     | no        | 20%              | 40%
    4     | yes       | 20%              | 0%

If most of the sockets are connected, this can be a problem, but it still
works better than now.

Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets")
CC: Willem de Bruijn <willemb@google.com>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |   15 +++++++++------
 net/ipv6/udp.c |   15 +++++++++------
 2 files changed, 18 insertions(+), 12 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -413,7 +413,7 @@ static struct sock *udp4_lib_lookup2(str
 				     struct udp_hslot *hslot2,
 				     struct sk_buff *skb)
 {
-	struct sock *sk, *result;
+	struct sock *sk, *result, *reuseport_result;
 	int score, badness;
 	u32 hash = 0;
 
@@ -423,17 +423,20 @@ static struct sock *udp4_lib_lookup2(str
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif);
 		if (score > badness) {
+			reuseport_result = NULL;
+
 			if (sk->sk_reuseport &&
 			    sk->sk_state != TCP_ESTABLISHED) {
 				hash = udp_ehashfn(net, daddr, hnum,
 						   saddr, sport);
-				result = reuseport_select_sock(sk, hash, skb,
-							sizeof(struct udphdr));
-				if (result && !reuseport_has_conns(sk, false))
-					return result;
+				reuseport_result = reuseport_select_sock(sk, hash, skb,
+									 sizeof(struct udphdr));
+				if (reuseport_result && !reuseport_has_conns(sk, false))
+					return reuseport_result;
 			}
+
+			result = reuseport_result ? : sk;
 			badness = score;
-			result = sk;
 		}
 	}
 	return result;
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -148,7 +148,7 @@ static struct sock *udp6_lib_lookup2(str
 		int dif, int sdif, struct udp_hslot *hslot2,
 		struct sk_buff *skb)
 {
-	struct sock *sk, *result;
+	struct sock *sk, *result, *reuseport_result;
 	int score, badness;
 	u32 hash = 0;
 
@@ -158,17 +158,20 @@ static struct sock *udp6_lib_lookup2(str
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif);
 		if (score > badness) {
+			reuseport_result = NULL;
+
 			if (sk->sk_reuseport &&
 			    sk->sk_state != TCP_ESTABLISHED) {
 				hash = udp6_ehashfn(net, daddr, hnum,
 						    saddr, sport);
 
-				result = reuseport_select_sock(sk, hash, skb,
-							sizeof(struct udphdr));
-				if (result && !reuseport_has_conns(sk, false))
-					return result;
+				reuseport_result = reuseport_select_sock(sk, hash, skb,
+									 sizeof(struct udphdr));
+				if (reuseport_result && !reuseport_has_conns(sk, false))
+					return reuseport_result;
 			}
-			result = sk;
+
+			result = reuseport_result ? : sk;
 			badness = score;
 		}
 	}

[PATCH 5.4 17/19] regmap: debugfs: check count when read regmap file

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit 74edd08a4fbf51d65fd8f4c7d8289cd0f392bd91 upstream.

When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
	echo "Checking regmap in $i";
	cat $i/registers;
done && grep -ri "0x02d0" *;

It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/regmap/regmap-debugfs.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -227,6 +227,9 @@ static ssize_t regmap_read_debugfs(struc
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -371,6 +374,9 @@ static ssize_t regmap_reg_ranges_read_fi
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;

[PATCH 5.4 18/19] PM: wakeup: Show statistics for deleted wakeup sources again

[Greg Kroah-Hartman]

From: zhuguangqing <zhuguangqing@xiaomi.com>

commit e976eb4b91e906f20ec25b20c152d53c472fc3fd upstream.

After commit 00ee22c28915 (PM / wakeup: Use seq_open() to show wakeup
stats), print_wakeup_source_stats(m, &deleted_ws) is not called from
wakeup_sources_stats_seq_show() any more.

Because deleted_ws is one of the wakeup sources, it should be shown
too, so add it to the end of all other wakeup sources.

Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/power/wakeup.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/base/power/wakeup.c
+++ b/drivers/base/power/wakeup.c
@@ -1073,6 +1073,9 @@ static void *wakeup_sources_stats_seq_ne
 		break;
 	}
 
+	if (!next_ws)
+		print_wakeup_source_stats(m, &deleted_ws);
+
 	return next_ws;
 }
 

[PATCH 5.4 19/19] Revert "dpaa_eth: fix usage as DSA master, try 3"

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

This reverts commit 40a904b1c2e57b22dd002dfce73688871cb0bac8.

The patch is not wrong, but the Fixes: tag is. It should have been:

	Fixes: 060ad66f9795 ("dpaa_eth: change DMA device")

which means that it's fixing a commit which was introduced in:

git tag --contains 060ad66f97954
v5.5

which then means it should have not been backported to linux-5.4.y,
where things _were_ working and now they're not.

Reported-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Changes in v1:
Adjusted the commit message from linux-4.19.y to linux-5.4.y

Changes in v2:
Fixed the sha1sum of the reverted commit.

 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2802,7 +2802,7 @@ static int dpaa_eth_probe(struct platfor
 	}
 
 	/* Do this here, so we can be verbose early */
-	SET_NETDEV_DEV(net_dev, dev->parent);
+	SET_NETDEV_DEV(net_dev, dev);
 	dev_set_drvdata(dev, net_dev);
 
 	priv = netdev_priv(net_dev);

Re: [PATCH 5.4 00/19] 5.4.55-rc1 review

[Guenter Roeck]

On Thu, Jul 30, 2020 at 10:04:02AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.55 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 429 pass: 429 fail: 0

Guenter

Re: [PATCH 5.4 00/19] 5.4.55-rc1 review

[Naresh Kamboju]

On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.55 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
Regressions on arm64 Juno-r2 device running LTP controllers-tests

CONFIG_ARM64_64K_PAGES=y

Unable to handle kernel paging request at virtual address dead000000000108
[dead000000000108] address between user and kernel address ranges
Internal error: Oops: 96000044 [#1] PREEMPT SMP

pc : get_page_from_freelist+0xa64/0x1030
lr : get_page_from_freelist+0x9c4/0x1030

We are trying to reproduce this kernel panic and trying to narrow down to
specific test cases.

Summary
------------------------------------------------------------------------

kernel: 5.4.55-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.4.y
git commit: 6666ca784e9e47288180a15935061d88debc9e4b
git describe: v5.4.54-20-g6666ca784e9e
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.54-20-g6666ca784e9e

arm64 kernel config and details:
config: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/kernel.config
vmlinux: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/vmlinux.xz
System.map: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/System.map

steps to reproduce:
- boot juno-r2 with 64k page size config
- run ltp controllers
  # cd /opt/ltp
  # ./runltp -f controllers

memcg_process: shmget() failed: Invalid argument
[  248.372285] Unable to handle kernel paging request at virtual
address dead000000000108
[  248.380223] Mem abort info:
[  248.383015]   ESR = 0x96000044
[  248.386071]   EC = 0x25: DABT (current EL), IL = 32 bits
[  248.391387]   SET = 0, FnV = 0
[  248.394440]   EA = 0, S1PTW = 0
[  248.397580] Data abort info:
[  248.400460]   ISV = 0, ISS = 0x00000044
[  248.404296]   CM = 0, WnR = 1
[  248.407264] [dead000000000108] address between user and kernel address ranges
[  248.414410] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[  248.419989] Modules linked in: tda998x drm_kms_helper drm crct10dif_ce fuse
[  248.426975] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.55-rc1 #1
[  248.433249] Hardware name: ARM Juno development board (r2) (DT)
[  248.439178] pstate: a0000085 (NzCv daIf -PAN -UAO)
[  248.443984] pc : get_page_from_freelist+0xa64/0x1030
[  248.448955] lr : get_page_from_freelist+0x9c4/0x1030
[  248.453923] sp : ffff80001000fbb0
[  248.457238] x29: ffff80001000fbb0 x28: ffff00097fdbfe48
[  248.462557] x27: 0000000000000010 x26: 0000000000000000
[  248.467877] x25: ffff00097feabdc0 x24: 0000000000000000
[  248.473196] x23: 0000000000000000 x22: 0000000000000000
[  248.478515] x21: 0000fff680154180 x20: ffff00097fdbfe38
[  248.483835] x19: 0000000000000000 x18: 0000000000000000
[  248.489154] x17: 0000000000000000 x16: 0000000000000000
[  248.494473] x15: 0000000000000000 x14: 0000000000000000
[  248.499792] x13: 0000000000000000 x12: 0000000034d4d91d
[  248.505111] x11: 0000000000000000 x10: 0000000000000000
[  248.510430] x9 : ffff80096e790000 x8 : ffffffffffffff40
[  248.515749] x7 : 0000000000000000 x6 : ffffffe002308b48
[  248.521068] x5 : ffff00097fdbfe38 x4 : dead000000000100
[  248.526387] x3 : 0000000000000000 x2 : 0000000000000000
[  248.531706] x1 : 0000000000000000 x0 : ffffffe002308b40
[  248.537026] Call trace:
[  248.539475]  get_page_from_freelist+0xa64/0x1030
[  248.544099]  __alloc_pages_nodemask+0x144/0x280
[  248.548635]  page_frag_alloc+0x70/0x140
[  248.552479]  __netdev_alloc_skb+0x158/0x188
[  248.556667]  smsc911x_poll+0x90/0x268
[  248.560342]  net_rx_action+0x114/0x340
[  248.564096]  __do_softirq+0x120/0x25c
[  248.567766]  irq_exit+0xb8/0xd8
[  248.570910]  __handle_domain_irq+0x64/0xb8
[  248.575010]  gic_handle_irq+0x50/0xa8
[  248.578675]  el1_irq+0xb8/0x180
[  248.581820]  tick_check_broadcast_expired+0x34/0x40
[  248.586705]  do_idle+0x8c/0x280
[  248.589848]  cpu_startup_entry+0x20/0x80
[  248.593777]  rest_init+0xd4/0xe0
[  248.597010]  arch_call_rest_init+0xc/0x14
[  248.601024]  start_kernel+0x418/0x44c
[  248.604693] Code: 54000a00 f10020c0 540009c0 a9400cc4 (f9000483)
[  248.610803] ---[ end trace 358f513e280e4dfd ]---
[  248.615426] Kernel panic - not syncing: Fatal exception in interrupt
[  248.621789] SMP: stopping secondary CPUs
[  249.740564] SMP: failed to stop secondary CPUs 0-2
[  249.745359] Kernel Offset: disabled
[  249.748849] CPU features: 0x0002,24006000
[  249.752859] Memory Limit: none
[  249.755921] ---[ end Kernel panic - not syncing: Fatal exception in
interrupt ]---


--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/19] 5.4.55-rc1 review

[Arnd Bergmann]

On Fri, Jul 31, 2020 at 12:32 PM Naresh Kamboju
<naresh.kamboju@linaro.org> wrote:
>
> On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.55 release.
> > There are 19 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> Regressions on arm64 Juno-r2 device running LTP controllers-tests
>
> CONFIG_ARM64_64K_PAGES=y
>
> Unable to handle kernel paging request at virtual address dead000000000108

This is LIST_POISON1+8, so something was following a list_head that got
deleted from a list.

> [dead000000000108] address between user and kernel address ranges
> Internal error: Oops: 96000044 [#1] PREEMPT SMP
>
> pc : get_page_from_freelist+0xa64/0x1030
> lr : get_page_from_freelist+0x9c4/0x1030
>
> We are trying to reproduce this kernel panic and trying to narrow down to
> specific test cases.
>
> Summary
> ------------------------------------------------------------------------
>
> kernel: 5.4.55-rc1
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> git branch: linux-5.4.y
> git commit: 6666ca784e9e47288180a15935061d88debc9e4b
> git describe: v5.4.54-20-g6666ca784e9e
> Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.4-oe/build/v5.4.54-20-g6666ca784e9e
>
> arm64 kernel config and details:
> config: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/kernel.config
> vmlinux: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/vmlinux.xz
> System.map: https://builds.tuxbuild.com/iIsSV-1_WtyDUTe88iKaqw/System.map
>
> steps to reproduce:
> - boot juno-r2 with 64k page size config
> - run ltp controllers
>   # cd /opt/ltp
>   # ./runltp -f controllers
>
> memcg_process: shmget() failed: Invalid argument
> [  248.372285] Unable to handle kernel paging request at virtual
> address dead000000000108
> [  248.380223] Mem abort info:
> [  248.383015]   ESR = 0x96000044
> [  248.386071]   EC = 0x25: DABT (current EL), IL = 32 bits
> [  248.391387]   SET = 0, FnV = 0
> [  248.394440]   EA = 0, S1PTW = 0
> [  248.397580] Data abort info:
> [  248.400460]   ISV = 0, ISS = 0x00000044
> [  248.404296]   CM = 0, WnR = 1
> [  248.407264] [dead000000000108] address between user and kernel address ranges
> [  248.414410] Internal error: Oops: 96000044 [#1] PREEMPT SMP
> [  248.419989] Modules linked in: tda998x drm_kms_helper drm crct10dif_ce fuse
> [  248.426975] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.55-rc1 #1
> [  248.433249] Hardware name: ARM Juno development board (r2) (DT)
> [  248.439178] pstate: a0000085 (NzCv daIf -PAN -UAO)
> [  248.443984] pc : get_page_from_freelist+0xa64/0x1030
> [  248.448955] lr : get_page_from_freelist+0x9c4/0x1030

The function is a little too long for me to see immediately which list this is.
Using addr2line should help.

> [  248.453923] sp : ffff80001000fbb0
> [  248.457238] x29: ffff80001000fbb0 x28: ffff00097fdbfe48
> [  248.462557] x27: 0000000000000010 x26: 0000000000000000
> [  248.467877] x25: ffff00097feabdc0 x24: 0000000000000000
> [  248.473196] x23: 0000000000000000 x22: 0000000000000000
> [  248.478515] x21: 0000fff680154180 x20: ffff00097fdbfe38
> [  248.483835] x19: 0000000000000000 x18: 0000000000000000
> [  248.489154] x17: 0000000000000000 x16: 0000000000000000
> [  248.494473] x15: 0000000000000000 x14: 0000000000000000
> [  248.499792] x13: 0000000000000000 x12: 0000000034d4d91d
> [  248.505111] x11: 0000000000000000 x10: 0000000000000000
> [  248.510430] x9 : ffff80096e790000 x8 : ffffffffffffff40
> [  248.515749] x7 : 0000000000000000 x6 : ffffffe002308b48
> [  248.521068] x5 : ffff00097fdbfe38 x4 : dead000000000100
> [  248.526387] x3 : 0000000000000000 x2 : 0000000000000000
> [  248.531706] x1 : 0000000000000000 x0 : ffffffe002308b40
> [  248.537026] Call trace:
> [  248.539475]  get_page_from_freelist+0xa64/0x1030
> [  248.544099]  __alloc_pages_nodemask+0x144/0x280
> [  248.548635]  page_frag_alloc+0x70/0x140
> [  248.552479]  __netdev_alloc_skb+0x158/0x188
> [  248.556667]  smsc911x_poll+0x90/0x268

This looks like a regular memory allocation, one common thing that may
have gone wrong here would be an earlier double-free.

There are not a lot of commits in v5.4.55-rc1, and most of these
are surely unrelated:

6666ca784e9e (HEAD, stable-rc/linux-5.4.y) Linux 5.4.55-rc1
ee4984bf5748 Revert "dpaa_eth: fix usage as DSA master, try 3"
783efa432aa4 PM: wakeup: Show statistics for deleted wakeup sources again
967783c61b31 regmap: debugfs: check count when read regmap file
3999cdbf89f0 drivers/net/wan/x25_asy: Fix to make it work
eb8b6691d757 AX.25: Prevent integer overflows in connect and sendmsg
3c3ae3e4c529 AX.25: Prevent out-of-bounds read in ax25_sendmsg()
e9380b1e9f82 AX.25: Fix out-of-bounds read in ax25_connect()
71e00f341e74 rxrpc: Fix sendmsg() returning EPIPE due to recvmsg()
returning ENODATA
a385dfd083fb ip6_gre: fix null-ptr-deref in ip6gre_init_net()
161727c98eb6 net-sysfs: add a newline when printing 'tx_timeout' by sysfs
a93155189546 qrtr: orphan socket in qrtr_release()

I don't think any of the above are in use on your machine.

1365360e789d udp: Improve load balancing for SO_REUSEPORT.
efb2848c55b3 udp: Copy has_conns in reuseport_grow().
829a46fae4fd sctp: shrink stream outq when fails to do addstream reconf
a4842355118b sctp: shrink stream outq only when new outcnt < old outcnt
e99e79382d46 tcp: allow at most one TLP probe per flight
66007a7d7f4b net: udp: Fix wrong clean up for IS_UDPLITE macro

These seem possible but unlikely to be the culprit

8508b3ca8595 rtnetlink: Fix memory(net_device) leak when ->newlink fails
c1efeaaebc74 dev: Defer free of skbs in flush_backlog

These both deal with memory allocation in some form, I would try reverting
the last one first.

       Arnd

Re: [PATCH 5.4 00/19] 5.4.55-rc1 review

[Greg Kroah-Hartman]

On Fri, Jul 31, 2020 at 04:02:16PM +0530, Naresh Kamboju wrote:
> On Thu, 30 Jul 2020 at 13:36, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.4.55 release.
> > There are 19 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> Regressions on arm64 Juno-r2 device running LTP controllers-tests
> 
> CONFIG_ARM64_64K_PAGES=y
> 
> Unable to handle kernel paging request at virtual address dead000000000108
> [dead000000000108] address between user and kernel address ranges
> Internal error: Oops: 96000044 [#1] PREEMPT SMP
> 
> pc : get_page_from_freelist+0xa64/0x1030
> lr : get_page_from_freelist+0x9c4/0x1030
> 
> We are trying to reproduce this kernel panic and trying to narrow down to
> specific test cases.

If you come up with something that needs to be reverted, please let me
know.

Otherwise, thanks for testing all of these.

greg k-h

Re: [PATCH 5.4 00/19] 5.4.55-rc1 review

[Jon Hunter]

On Thu, 30 Jul 2020 10:04:02 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.55 release.
> There are 19 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.55-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    11 builds:	11 pass, 0 fail
    26 boots:	26 pass, 0 fail
    56 tests:	56 pass, 0 fail

Linux version:	5.4.55-rc1-g6666ca784e9e
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon