[PATCH 4.4 00/54] 4.4.232-rc1 review

[PATCH 4.4 00/54] 4.4.232-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.4.232 release.
There are 54 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.232-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.4.232-rc1

Masami Hiramatsu <mhiramat@kernel.org>
    perf probe: Fix to check blacklist address correctly

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf annotate: Use asprintf when formatting objdump command line

Jiri Olsa <jolsa@kernel.org>
    perf tools: Fix snprint warnings for gcc 8

Changbin Du <changbin.du@gmail.com>
    perf: Make perf able to build with latest libbfd

Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
    tools/lib/subcmd/pager.c: do not alias select() params

Eric Sandeen <sandeen@redhat.com>
    xfs: set format back to extents if xfs_bmap_extents_to_btree

Peng Fan <peng.fan@nxp.com>
    regmap: debugfs: check count when read regmap file

Fangrui Song <maskray@google.com>
    Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/x25_asy: Fix to make it work

Wei Yongjun <weiyongjun1@huawei.com>
    ip6_gre: fix null-ptr-deref in ip6gre_init_net()

David Howells <dhowells@redhat.com>
    rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA

Yuchung Cheng <ycheng@google.com>
    tcp: allow at most one TLP probe per flight

Dan Carpenter <dan.carpenter@oracle.com>
    AX.25: Prevent integer overflows in connect and sendmsg

Miaohe Lin <linmiaohe@huawei.com>
    net: udp: Fix wrong clean up for IS_UDPLITE macro

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    net-sysfs: add a newline when printing 'tx_timeout' by sysfs

Peilin Ye <yepeilin.cs@gmail.com>
    AX.25: Prevent out-of-bounds read in ax25_sendmsg()

Peilin Ye <yepeilin.cs@gmail.com>
    AX.25: Fix out-of-bounds read in ax25_connect()

Mark O'Donovan <shiftee@posteo.net>
    ath9k: Fix regression with Atheros 9271

Qiujun Huang <hqjagain@gmail.com>
    ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

John David Anglin <dave.anglin@bell.net>
    parisc: Add atomic64_set_release() define to avoid CPU soft lockups

Hugh Dickins <hughd@google.com>
    mm/memcg: fix refcount error while moving and swapping

Serge Semin <Sergey.Semin@baikalelectronics.ru>
    serial: 8250_mtk: Fix high-speed baud rates clamping

Yang Yingliang <yangyingliang@huawei.com>
    serial: 8250: fix null-ptr-deref in serial8250_start_tx()

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift

Rustam Kovhaev <rkovhaev@gmail.com>
    staging: wlan-ng: properly check endpoint types

Steve French <stfrench@microsoft.com>
    Revert "cifs: Fix the target file was deleted when rename failed."

Arnd Bergmann <arnd@arndb.de>
    x86: math-emu: Fix up 'cmp' insn for clang ias

Will Deacon <will@kernel.org>
    arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP

Evgeny Novikov <novikov@ispras.ru>
    usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()

Marc Kleine-Budde <mkl@pengutronix.de>
    regmap: dev_get_regmap_match(): fix string comparison

Pi-Hsun Shih <pihsun@chromium.org>
    scripts/decode_stacktrace: strip basepath from all paths

Wang Hai <wanghai38@huawei.com>
    net: smc91x: Fix possible memory leak in smc_drv_probe()

Sergey Organov <sorganov@gmail.com>
    net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration

George Kennedy <george.kennedy@oracle.com>
    ax88172a: fix ax88172a_unbind() failures

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path

Boris Burkov <boris@bur.io>
    btrfs: fix mount failure caused by race with umount

Sebastian Andrzej Siewior <bigeasy@linutronix.de>
    x86/fpu: Disable bottom halves while loading FPU registers

Filipe Manana <fdmanana@suse.com>
    btrfs: fix double free on ulist after backref resolution failure

Hans de Goede <hdegoede@redhat.com>
    ASoC: rt5670: Correct RT5670_LDO_SEL_MASK

Takashi Iwai <tiwai@suse.de>
    ALSA: info: Drop WARN_ON() from buffer NULL sanity check

Oleg Nesterov <oleg@redhat.com>
    uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

Jiri Olsa <jolsa@kernel.org>
    perf/core: Fix locking for children siblings group read

Olga Kornievskaia <kolga@netapp.com>
    SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")

Ben Skeggs <bskeggs@redhat.com>
    drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

Tom Rix <trix@redhat.com>
    net: sky2: initialize return of gm_phy_read

Xie He <xie.he.0141@gmail.com>
    drivers/net/wan/lapbether: Fixed the value of hard_header_len

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: update *pos in cpuinfo_op.next

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: fix __sync_fetch_and_{and,or}_4 declarations

Tom Rix <trix@redhat.com>
    scsi: scsi_transport_spi: Fix function pointer check

Markus Theil <markus.theil@tu-ilmenau.de>
    mac80211: allow rx of mesh eapol frames with default rx key

Jacky Hu <hengqing.hu@gmail.com>
    pinctrl: amd: fix npins for uart0 in kerncz_groups


-------------

Diffstat:

 Makefile                                           |  6 +--
 arch/arm64/kernel/debug-monitors.c                 |  4 +-
 arch/parisc/include/asm/atomic.h                   |  2 +
 arch/x86/kernel/fpu/signal.c                       |  4 +-
 arch/x86/math-emu/wm_sqrt.S                        |  2 +-
 arch/xtensa/kernel/setup.c                         |  3 +-
 arch/xtensa/kernel/xtensa_ksyms.c                  |  4 +-
 drivers/base/regmap/regmap-debugfs.c               |  6 +++
 drivers/base/regmap/regmap.c                       |  2 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c   |  4 +-
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c |  4 +-
 drivers/net/ethernet/marvell/sky2.c                |  2 +-
 drivers/net/ethernet/smsc/smc91x.c                 |  4 +-
 drivers/net/hippi/rrunner.c                        |  2 +-
 drivers/net/phy/dp83640.c                          |  4 ++
 drivers/net/usb/ax88172a.c                         |  1 +
 drivers/net/wan/lapbether.c                        |  9 +++-
 drivers/net/wan/x25_asy.c                          | 21 ++++++---
 drivers/net/wireless/ath/ath9k/hif_usb.c           | 52 +++++++++++++++++-----
 drivers/net/wireless/ath/ath9k/hif_usb.h           |  5 +++
 drivers/pinctrl/pinctrl-amd.h                      |  2 +-
 drivers/scsi/scsi_transport_spi.c                  |  2 +-
 drivers/staging/comedi/drivers/addi_apci_1032.c    | 20 ++++++---
 drivers/staging/comedi/drivers/addi_apci_1500.c    | 24 +++++++---
 drivers/staging/comedi/drivers/addi_apci_1564.c    | 20 ++++++---
 drivers/staging/comedi/drivers/ni_6527.c           |  2 +-
 drivers/staging/wlan-ng/prism2usb.c                | 16 ++++++-
 drivers/tty/serial/8250/8250_core.c                |  2 +-
 drivers/tty/serial/8250/8250_mtk.c                 | 18 ++++++++
 drivers/usb/gadget/udc/gr_udc.c                    |  7 ++-
 fs/btrfs/backref.c                                 |  1 +
 fs/btrfs/volumes.c                                 |  8 ++++
 fs/cifs/inode.c                                    | 10 +----
 fs/nfs/direct.c                                    | 13 ++----
 fs/nfs/file.c                                      |  1 -
 fs/xfs/libxfs/xfs_bmap.c                           |  2 +
 include/linux/tcp.h                                |  5 ++-
 kernel/events/core.c                               |  5 +++
 kernel/events/uprobes.c                            |  2 +-
 mm/memcontrol.c                                    |  4 +-
 net/ax25/af_ax25.c                                 | 10 ++++-
 net/core/net-sysfs.c                               |  2 +-
 net/ipv4/tcp_input.c                               | 11 ++---
 net/ipv4/tcp_output.c                              | 13 +++---
 net/ipv4/udp.c                                     |  2 +-
 net/ipv6/ip6_gre.c                                 | 11 ++---
 net/ipv6/udp.c                                     |  2 +-
 net/mac80211/rx.c                                  | 26 +++++++++++
 net/rxrpc/ar-output.c                              |  2 +-
 net/rxrpc/ar-recvmsg.c                             |  2 +-
 scripts/decode_stacktrace.sh                       |  4 +-
 sound/core/info.c                                  |  4 +-
 sound/soc/codecs/rt5670.h                          |  2 +-
 tools/perf/builtin-script.c                        | 24 +++++-----
 tools/perf/tests/attr.c                            |  4 +-
 tools/perf/tests/pmu.c                             |  2 +-
 tools/perf/util/annotate.c                         | 14 ++++--
 tools/perf/util/cgroup.c                           |  2 +-
 tools/perf/util/pager.c                            |  5 ++-
 tools/perf/util/parse-events.c                     |  4 +-
 tools/perf/util/pmu.c                              |  2 +-
 tools/perf/util/probe-event.c                      | 21 ++++++---
 tools/perf/util/srcline.c                          | 16 ++++++-
 63 files changed, 347 insertions(+), 143 deletions(-)

[PATCH 4.4 01/54] pinctrl: amd: fix npins for uart0 in kerncz_groups

[Greg Kroah-Hartman]

From: Jacky Hu <hengqing.hu@gmail.com>

[ Upstream commit 69339d083dfb7786b0e0b3fc19eaddcf11fabdfb ]

uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later
	{
		.name = "uart0",
		.pins = uart0_pins,
		.npins = 9,
	},

npins should be 5 instead of 9 according to the definition.

Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-amd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.h b/drivers/pinctrl/pinctrl-amd.h
index 7bfea47dbb472..f63417197a62f 100644
--- a/drivers/pinctrl/pinctrl-amd.h
+++ b/drivers/pinctrl/pinctrl-amd.h
@@ -249,7 +249,7 @@ static const struct amd_pingroup kerncz_groups[] = {
 	{
 		.name = "uart0",
 		.pins = uart0_pins,
-		.npins = 9,
+		.npins = 5,
 	},
 	{
 		.name = "uart1",
-- 
2.25.1

[PATCH 4.4 02/54] mac80211: allow rx of mesh eapol frames with default rx key

[Greg Kroah-Hartman]

From: Markus Theil <markus.theil@tu-ilmenau.de>

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index a74a6ff18f919..886dce84e70c0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1963,6 +1963,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
 
 static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 {
+	struct ieee80211_hdr *hdr = (void *)rx->skb->data;
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 
@@ -1973,6 +1974,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
 	if (status->flag & RX_FLAG_DECRYPTED)
 		return 0;
 
+	/* check mesh EAPOL frames first */
+	if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) &&
+		     ieee80211_is_data(fc))) {
+		struct ieee80211s_hdr *mesh_hdr;
+		u16 hdr_len = ieee80211_hdrlen(fc);
+		u16 ethertype_offset;
+		__be16 ethertype;
+
+		if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr))
+			goto drop_check;
+
+		/* make sure fixed part of mesh header is there, also checks skb len */
+		if (!pskb_may_pull(rx->skb, hdr_len + 6))
+			goto drop_check;
+
+		mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len);
+		ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) +
+				   sizeof(rfc1042_header);
+
+		if (skb_copy_bits(rx->skb, ethertype_offset, &ethertype, 2) == 0 &&
+		    ethertype == rx->sdata->control_port_protocol)
+			return 0;
+	}
+
+drop_check:
 	/* Drop unencrypted frames if key is set. */
 	if (unlikely(!ieee80211_has_protected(fc) &&
 		     !ieee80211_is_any_nullfunc(fc) &&
-- 
2.25.1

[PATCH 4.4 03/54] scsi: scsi_transport_spi: Fix function pointer check

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ]

clang static analysis flags several null function pointer problems.

drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewing the store_spi_store_max macro

	if (i->f->set_##field)
		return -EINVAL;

should be

	if (!i->f->set_##field)
		return -EINVAL;

Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 319868f3f6743..083cd11ce7d7d 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -353,7 +353,7 @@ store_spi_transport_##field(struct device *dev, 			\
 	struct spi_transport_attrs *tp					\
 		= (struct spi_transport_attrs *)&starget->starget_data;	\
 									\
-	if (i->f->set_##field)						\
+	if (!i->f->set_##field)						\
 		return -EINVAL;						\
 	val = simple_strtoul(buf, NULL, 0);				\
 	if (val > tp->max_##field)					\
-- 
2.25.1

[PATCH 4.4 04/54] xtensa: fix __sync_fetch_and_{and,or}_4 declarations

[Greg Kroah-Hartman]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/xtensa_ksyms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index e2dd9109df633..00f17b5ec9c92 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -82,13 +82,13 @@ void __xtensa_libgcc_window_spill(void)
 }
 EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
 
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
 EXPORT_SYMBOL(__sync_fetch_and_and_4);
 
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
-- 
2.25.1

[PATCH 4.4 05/54] xtensa: update *pos in cpuinfo_op.next

[Greg Kroah-Hartman]

From: Max Filippov <jcmvbkbc@gmail.com>

[ Upstream commit 0d5ab144429e8bd80889b856a44d56ab4a5cd59b ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/xtensa/kernel/setup.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 49ccbd9022f61..92f5a259e2517 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -716,7 +716,8 @@ c_start(struct seq_file *f, loff_t *pos)
 static void *
 c_next(struct seq_file *f, void *v, loff_t *pos)
 {
-	return NULL;
+	++*pos;
+	return c_start(f, pos);
 }
 
 static void
-- 
2.25.1

[PATCH 4.4 06/54] drivers/net/wan/lapbether: Fixed the value of hard_header_len

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes,
  then this driver will prepend a length field of 2 bytes,
  then the underlying Ethernet device will prepend its own header.

So, the header length required should be:
  -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/lapbether.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 6676607164d65..f5657783fad4e 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -308,7 +308,6 @@ static void lapbeth_setup(struct net_device *dev)
 	dev->netdev_ops	     = &lapbeth_netdev_ops;
 	dev->destructor	     = free_netdev;
 	dev->type            = ARPHRD_X25;
-	dev->hard_header_len = 3;
 	dev->mtu             = 1000;
 	dev->addr_len        = 0;
 }
@@ -329,6 +328,14 @@ static int lapbeth_new_device(struct net_device *dev)
 	if (!ndev)
 		goto out;
 
+	/* When transmitting data:
+	 * first this driver removes a pseudo header of 1 byte,
+	 * then the lapb module prepends an LAPB header of at most 3 bytes,
+	 * then this driver prepends a length field of 2 bytes,
+	 * then the underlying Ethernet device prepends its own header.
+	 */
+	ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+
 	lapbeth = netdev_priv(ndev);
 	lapbeth->axdev = ndev;
 
-- 
2.25.1

[PATCH 4.4 07/54] net: sky2: initialize return of gm_phy_read

[Greg Kroah-Hartman]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 28b18e4eb515af7c6661c3995c6e3c34412c2874 ]

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.

Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 8ba9eadc20791..3fb9cbdac3bf0 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -215,7 +215,7 @@ io_error:
 
 static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
 {
-	u16 v;
+	u16 v = 0;
 	__gm_phy_read(hw, port, reg, &v);
 	return v;
 }
-- 
2.25.1

[PATCH 4.4 08/54] drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout

[Greg Kroah-Hartman]

From: Ben Skeggs <bskeggs@redhat.com>

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c   | 4 ++--
 drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
index 954f5b76bfcf7..d44965f805fe9 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c
@@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00e4e4 + base);
 			udelay(1);
diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c
index bed231b56dbd2..7cac8fe372b6b 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c
@@ -118,10 +118,10 @@ gm204_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry,
 		if (retries)
 			udelay(400);
 
-		/* transaction request, wait up to 1ms for it to complete */
+		/* transaction request, wait up to 2ms for it to complete */
 		nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);
 
-		timeout = 1000;
+		timeout = 2000;
 		do {
 			ctrl = nvkm_rd32(device, 0x00d954 + base);
 			udelay(1);
-- 
2.25.1

[PATCH 4.4 09/54] SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")

[Greg Kroah-Hartman]

From: Olga Kornievskaia <kolga@netapp.com>

commit 65caafd0d2145d1dd02072c4ced540624daeab40 upstream.

Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).

The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/direct.c |   13 ++++---------
 fs/nfs/file.c   |    1 -
 2 files changed, 4 insertions(+), 10 deletions(-)

--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -385,6 +385,8 @@ static void nfs_direct_complete(struct n
 	if (write)
 		nfs_zap_mapping(inode, inode->i_mapping);
 
+	inode_dio_end(inode);
+
 	if (dreq->iocb) {
 		long res = (long) dreq->error;
 		if (!res)
@@ -394,10 +396,7 @@ static void nfs_direct_complete(struct n
 
 	complete_all(&dreq->completion);
 
-	igrab(inode);
 	nfs_direct_req_release(dreq);
-	inode_dio_end(inode);
-	iput(inode);
 }
 
 static void nfs_direct_readpage_release(struct nfs_page *req)
@@ -538,10 +537,8 @@ static ssize_t nfs_direct_read_schedule_
 	 * generic layer handle the completion.
 	 */
 	if (requested_bytes == 0) {
-		igrab(inode);
-		nfs_direct_req_release(dreq);
 		inode_dio_end(inode);
-		iput(inode);
+		nfs_direct_req_release(dreq);
 		return result < 0 ? result : -EIO;
 	}
 
@@ -942,10 +939,8 @@ static ssize_t nfs_direct_write_schedule
 	 * generic layer handle the completion.
 	 */
 	if (requested_bytes == 0) {
-		igrab(inode);
-		nfs_direct_req_release(dreq);
 		inode_dio_end(inode);
-		iput(inode);
+		nfs_direct_req_release(dreq);
 		return result < 0 ? result : -EIO;
 	}
 
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -82,7 +82,6 @@ nfs_file_release(struct inode *inode, st
 	dprintk("NFS: release(%pD2)\n", filp);
 
 	nfs_inc_stats(inode, NFSIOS_VFSRELEASE);
-	inode_dio_wait(inode);
 	nfs_file_clear_open_context(filp);
 	return 0;
 }

[PATCH 4.4 10/54] perf/core: Fix locking for children siblings group read

[Greg Kroah-Hartman]

From: Jiri Olsa <jolsa@kernel.org>

commit 2aeb1883547626d82c597cce2c99f0b9c62e2425 upstream.

We're missing ctx lock when iterating children siblings
within the perf_read path for group reading. Following
race and crash can happen:

User space doing read syscall on event group leader:

T1:
  perf_read
    lock event->ctx->mutex
    perf_read_group
      lock leader->child_mutex
      __perf_read_group_add(child)
        list_for_each_entry(sub, &leader->sibling_list, group_entry)

---->   sub might be invalid at this point, because it could
        get removed via perf_event_exit_task_context in T2

Child exiting and cleaning up its events:

T2:
  perf_event_exit_task_context
    lock ctx->mutex
    list_for_each_entry_safe(child_event, next, &child_ctx->event_list,...
      perf_event_exit_event(child)
        lock ctx->lock
        perf_group_detach(child)
        unlock ctx->lock

---->   child is removed from sibling_list without any sync
        with T1 path above

        ...
        free_event(child)

Before the child is removed from the leader's child_list,
(and thus is omitted from perf_read_group processing), we
need to ensure that perf_read_group touches child's
siblings under its ctx->lock.

Peter further notes:

| One additional note; this bug got exposed by commit:
|
|   ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
|
| which made it possible to actually trigger this code-path.

Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ba5213ae6b88 ("perf/core: Correct event creation with PERF_FORMAT_GROUP")
Link: http://lkml.kernel.org/r/20170720141455.2106-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -3940,7 +3940,9 @@ EXPORT_SYMBOL_GPL(perf_event_read_value)
 static int __perf_read_group_add(struct perf_event *leader,
 					u64 read_format, u64 *values)
 {
+	struct perf_event_context *ctx = leader->ctx;
 	struct perf_event *sub;
+	unsigned long flags;
 	int n = 1; /* skip @nr */
 	int ret;
 
@@ -3970,12 +3972,15 @@ static int __perf_read_group_add(struct
 	if (read_format & PERF_FORMAT_ID)
 		values[n++] = primary_event_id(leader);
 
+	raw_spin_lock_irqsave(&ctx->lock, flags);
+
 	list_for_each_entry(sub, &leader->sibling_list, group_entry) {
 		values[n++] += perf_event_count(sub);
 		if (read_format & PERF_FORMAT_ID)
 			values[n++] = primary_event_id(sub);
 	}
 
+	raw_spin_unlock_irqrestore(&ctx->lock, flags);
 	return 0;
 }
 

[PATCH 4.4 11/54] uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression

[Greg Kroah-Hartman]

From: Oleg Nesterov <oleg@redhat.com>

commit fe5ed7ab99c656bd2f5b79b49df0e9ebf2cead8a upstream.

If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:

	# cat test.c
	void unused_func(void)
	{
	}
	int main(void)
	{
		return 0;
	}

	# gcc -g test.c -o test
	# perf probe -x ./test -a unused_func
	# perf record -e probe_test:unused_func gdb ./test -ex run
	GNU gdb (GDB) 10.0.50.20200714-git
	...
	Program received signal SIGTRAP, Trace/breakpoint trap.
	0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
	(gdb)

The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.

Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.

This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.

Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/events/uprobes.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -1875,7 +1875,7 @@ static void handle_swbp(struct pt_regs *
 	if (!uprobe) {
 		if (is_swbp > 0) {
 			/* No matching uprobe; signal SIGTRAP. */
-			send_sig(SIGTRAP, current, 0);
+			force_sig(SIGTRAP, current);
 		} else {
 			/*
 			 * Either we raced with uprobe_unregister() or we can't

[PATCH 4.4 12/54] ALSA: info: Drop WARN_ON() from buffer NULL sanity check

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

commit 60379ba08532eca861e933b389526a4dc89e0c42 upstream.

snd_info_get_line() has a sanity check of NULL buffer -- both buffer
itself being NULL and buffer->buffer being NULL.  Basically both
checks are valid and necessary, but the problem is that it's with
snd_BUG_ON() macro that triggers WARN_ON().  The latter condition
(NULL buffer->buffer) can be met arbitrarily by user since the buffer
is allocated at the first write, so it means that user can trigger
WARN_ON() at will.

This patch addresses it by simply moving buffer->buffer NULL check out
of snd_BUG_ON() so that spurious WARNING is no longer triggered.

Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/info.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -634,7 +634,9 @@ int snd_info_get_line(struct snd_info_bu
 {
 	int c = -1;
 
-	if (snd_BUG_ON(!buffer || !buffer->buffer))
+	if (snd_BUG_ON(!buffer))
+		return 1;
+	if (!buffer->buffer)
 		return 1;
 	if (len <= 0 || buffer->stop || buffer->error)
 		return 1;

[PATCH 4.4 13/54] ASoC: rt5670: Correct RT5670_LDO_SEL_MASK

[Greg Kroah-Hartman]

From: Hans de Goede <hdegoede@redhat.com>

commit 5cacc6f5764e94fa753b2c1f5f7f1f3f74286e82 upstream.

The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.

Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.

According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.

Fixes: 5e8351de740d ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/soc/codecs/rt5670.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/soc/codecs/rt5670.h
+++ b/sound/soc/codecs/rt5670.h
@@ -760,7 +760,7 @@
 #define RT5670_PWR_VREF2_BIT			4
 #define RT5670_PWR_FV2				(0x1 << 3)
 #define RT5670_PWR_FV2_BIT			3
-#define RT5670_LDO_SEL_MASK			(0x3)
+#define RT5670_LDO_SEL_MASK			(0x7)
 #define RT5670_LDO_SEL_SFT			0
 
 /* Power Management for Analog 2 (0x64) */

[PATCH 4.4 14/54] btrfs: fix double free on ulist after backref resolution failure

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 580c079b5766ac706f56eec5c79aee4bf929fef6 upstream.

At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots
argument to point to it. However if later we fail due to an error returned
by find_parent_nodes(), we free that ulist but leave a dangling pointer in
the **roots argument. Upon receiving the error, a caller of this function
can attempt to free the same ulist again, resulting in an invalid memory
access.

One such scenario is during qgroup accounting:

btrfs_qgroup_account_extents()

 --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated
     pointer) to btrfs_find_all_roots()

   --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe()
       passing &new_roots to it

     --> allocates ulist and assigns its address to **roots (which
         points to new_roots from btrfs_qgroup_account_extents())

     --> find_parent_nodes() returns an error, so we free the ulist
         and leave **roots pointing to it after returning

 --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned
     an error and jumps to the label 'cleanup', which just tries to
     free again the same ulist

Stack trace example:

 ------------[ cut here ]------------
 BTRFS: tree first key check failed
 WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Modules linked in: dm_snapshot dm_thin_pool (...)
 CPU: 1 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Code: 28 5b 5d (...)
 RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
 RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e
 R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  read_block_for_search+0xf6/0x350 [btrfs]
  btrfs_next_old_leaf+0x242/0x650 [btrfs]
  resolve_indirect_refs+0x7cf/0x9e0 [btrfs]
  find_parent_nodes+0x4ea/0x12c0 [btrfs]
  btrfs_find_all_roots_safe+0xbf/0x130 [btrfs]
  btrfs_qgroup_account_extents+0x9d/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last  enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace 8639237550317b48 ]---
 BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024)
 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
 CPU: 2 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ulist_free+0x13/0x20 [btrfs]
  btrfs_qgroup_account_extents+0xf3/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 Modules linked in: dm_snapshot dm_thin_pool (...)
 ---[ end trace 8639237550317b49 ]---
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after
it frees the ulist.

Fixes: 8da6d5815c592b ("Btrfs: added btrfs_find_all_roots()")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/btrfs/backref.c |    1 +
 1 file changed, 1 insertion(+)

--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -1221,6 +1221,7 @@ static int __btrfs_find_all_roots(struct
 		if (ret < 0 && ret != -ENOENT) {
 			ulist_free(tmp);
 			ulist_free(*roots);
+			*roots = NULL;
 			return ret;
 		}
 		node = ulist_next(tmp, &uiter);

[PATCH 4.4 15/54] x86/fpu: Disable bottom halves while loading FPU registers

[Greg Kroah-Hartman]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 68239654acafe6aad5a3c1dc7237e60accfebc03 ]

The sequence

  fpu->initialized = 1;		/* step A */
  preempt_disable();		/* step B */
  fpu__restore(fpu);
  preempt_enable();

in __fpu__restore_sig() is racy in regard to a context switch.

For 32bit frames, __fpu__restore_sig() prepares the FPU state within
fpu->state. To ensure that a context switch (switch_fpu_prepare() in
particular) does not modify fpu->state it uses fpu__drop() which sets
fpu->initialized to 0.

After fpu->initialized is cleared, the CPU's FPU state is not saved
to fpu->state during a context switch. The new state is loaded via
fpu__restore(). It gets loaded into fpu->state from userland and
ensured it is sane. fpu->initialized is then set to 1 in order to avoid
fpu__initialize() doing anything (overwrite the new state) which is part
of fpu__restore().

A context switch between step A and B above would save CPU's current FPU
registers to fpu->state and overwrite the newly prepared state. This
looks like a tiny race window but the Kernel Test Robot reported this
back in 2016 while we had lazy FPU support. Borislav Petkov made the
link between that report and another patch that has been posted. Since
the removal of the lazy FPU support, this race goes unnoticed because
the warning has been removed.

Disable bottom halves around the restore sequence to avoid the race. BH
need to be disabled because BH is allowed to run (even with preemption
disabled) and might invoke kernel_fpu_begin() by doing IPsec.

 [ bp: massage commit message a bit. ]

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: kvm ML <kvm@vger.kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20181120102635.ddv3fvavxajjlfqk@linutronix.de
Link: https://lkml.kernel.org/r/20160226074940.GA28911@pd.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/fpu/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index 31fad2cbd734b..8fc842dae3b39 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -317,10 +317,10 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
 			sanitize_restored_xstate(tsk, &env, xfeatures, fx_only);
 		}
 
+		local_bh_disable();
 		fpu->fpstate_active = 1;
-		preempt_disable();
 		fpu__restore(fpu);
-		preempt_enable();
+		local_bh_enable();
 
 		return err;
 	} else {
-- 
2.25.1

[PATCH 4.4 16/54] btrfs: fix mount failure caused by race with umount

[Greg Kroah-Hartman]

From: Boris Burkov <boris@bur.io>

[ Upstream commit 48cfa61b58a1fee0bc49eef04f8ccf31493b7cdd ]

It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.

Here is the sequence laid out in greater detail:

CPU0                                                    CPU1
down_write sb->s_umount
btrfs_kill_super
  kill_anon_super(sb)
    generic_shutdown_super(sb);
      shrink_dcache_for_umount(sb);
      sync_filesystem(sb);
      evict_inodes(sb); // SLOW

                                              btrfs_mount_root
                                                btrfs_scan_one_device
                                                fs_devices = device->fs_devices
                                                fs_info->fs_devices = fs_devices
                                                // fs_devices-opened makes this a no-op
                                                btrfs_open_devices(fs_devices, mode, fs_type)
                                                s = sget(fs_type, test, set, flags, fs_info);
                                                  find sb in s_instances
                                                  grab_super(sb);
                                                    down_write(&s->s_umount); // blocks

      sop->put_super(sb)
        // sb->fs_devices->opened == 2; no-op
      spin_lock(&sb_lock);
      hlist_del_init(&sb->s_instances);
      spin_unlock(&sb_lock);
      up_write(&sb->s_umount);
                                                    return 0;
                                                  retry lookup
                                                  don't find sb in s_instances (deleted by CPU0)
                                                  s = alloc_super
                                                  return s;
                                                btrfs_fill_super(s, fs_devices, data)
                                                  open_ctree // fs_devices total_rw_bytes improperly set!
                                                    btrfs_read_chunk_tree
                                                      read_one_dev // increment total_rw_bytes again!!
                                                      super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!

To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.

To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.

  for i in $(seq 0 500)
  do
    dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
  done
  umount /mnt/foo&
  mount /mnt/foo

does the trick for me.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/volumes.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 55ce6543050d9..dcae0cf4924b7 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -6693,6 +6693,14 @@ int btrfs_read_chunk_tree(struct btrfs_root *root)
 	mutex_lock(&uuid_mutex);
 	lock_chunks(root);
 
+	/*
+	 * It is possible for mount and umount to race in such a way that
+	 * we execute this code path, but open_fs_devices failed to clear
+	 * total_rw_bytes. We certainly want it cleared before reading the
+	 * device items, so clear it here.
+	 */
+	root->fs_info->fs_devices->total_rw_bytes = 0;
+
 	/*
 	 * Read all device items, and then all the chunk items. All
 	 * device items are found before any chunk item (their object id
-- 
2.25.1

[PATCH 4.4 17/54] hippi: Fix a size used in a pci_free_consistent() in an error handling path

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]

The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.

Fix it and have it consistent with the corresponding call in 'rr_close()'.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hippi/rrunner.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index 313e006f74feb..6f3519123eb66 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1250,7 +1250,7 @@ static int rr_open(struct net_device *dev)
 		rrpriv->info = NULL;
 	}
 	if (rrpriv->rx_ctrl) {
-		pci_free_consistent(pdev, sizeof(struct ring_ctrl),
+		pci_free_consistent(pdev, 256 * sizeof(struct ring_ctrl),
 				    rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma);
 		rrpriv->rx_ctrl = NULL;
 	}
-- 
2.25.1

[PATCH 4.4 18/54] ax88172a: fix ax88172a_unbind() failures

[Greg Kroah-Hartman]

From: George Kennedy <george.kennedy@oracle.com>

[ Upstream commit c28d9a285668c799eeae2f7f93e929a6028a4d6d ]

If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.

Fixes: a9a51bd727d1 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ax88172a.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
index 6b1d03b73eeb8..6b734c7ffec39 100644
--- a/drivers/net/usb/ax88172a.c
+++ b/drivers/net/usb/ax88172a.c
@@ -245,6 +245,7 @@ static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
 	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf);
 	if (ret < ETH_ALEN) {
 		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
+		ret = -EIO;
 		goto free;
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
-- 
2.25.1

[PATCH 4.4 19/54] net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration

[Greg Kroah-Hartman]

From: Sergey Organov <sorganov@gmail.com>

[ Upstream commit 473309fb8372365ad211f425bca760af800e10a7 ]

>From Documentation/networking/timestamping.txt:

  A driver which supports hardware time stamping shall update the
  struct with the actual, possibly more permissive configuration.

Do update the struct passed when we upscale the requested time
stamping mode.

Fixes: cb646e2b02b2 ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/dp83640.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 847c9fc10f9a9..0da80adc545af 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1335,6 +1335,7 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr)
 		dp83640->hwts_rx_en = 1;
 		dp83640->layer = PTP_CLASS_L4;
 		dp83640->version = PTP_CLASS_V1;
+		cfg.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
@@ -1342,6 +1343,7 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr)
 		dp83640->hwts_rx_en = 1;
 		dp83640->layer = PTP_CLASS_L4;
 		dp83640->version = PTP_CLASS_V2;
+		cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
@@ -1349,6 +1351,7 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr)
 		dp83640->hwts_rx_en = 1;
 		dp83640->layer = PTP_CLASS_L2;
 		dp83640->version = PTP_CLASS_V2;
+		cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_SYNC:
@@ -1356,6 +1359,7 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr)
 		dp83640->hwts_rx_en = 1;
 		dp83640->layer = PTP_CLASS_L4 | PTP_CLASS_L2;
 		dp83640->version = PTP_CLASS_V2;
+		cfg.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 		break;
 	default:
 		return -ERANGE;
-- 
2.25.1

[PATCH 4.4 20/54] net: smc91x: Fix possible memory leak in smc_drv_probe()

[Greg Kroah-Hartman]

From: Wang Hai <wanghai38@huawei.com>

[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ]

If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.

Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/smsc/smc91x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 7405f537beca7..8531a72019680 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2289,7 +2289,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 		ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
 					      "power", 0, 0, 100);
 		if (ret)
-			return ret;
+			goto out_free_netdev;
 
 		/*
 		 * Optional reset GPIO configured? Minimum 100 ns reset needed
@@ -2298,7 +2298,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 		ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
 					      "reset", 0, 0, 100);
 		if (ret)
-			return ret;
+			goto out_free_netdev;
 
 		/*
 		 * Need to wait for optional EEPROM to load, max 750 us according
-- 
2.25.1

[PATCH 4.4 21/54] scripts/decode_stacktrace: strip basepath from all paths

[Greg Kroah-Hartman]

From: Pi-Hsun Shih <pihsun@chromium.org>

[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ]

Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.

Change to remove the basepath prefix from all lines.

Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/decode_stacktrace.sh | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index 4f5e76f76b9dc..003968cb04d4a 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -63,8 +63,8 @@ parse_symbol() {
 		return
 	fi
 
-	# Strip out the base of the path
-	code=${code#$basepath/}
+	# Strip out the base of the path on each line
+	code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")
 
 	# In the case of inlines, move everything to same line
 	code=${code//$'\n'/' '}
-- 
2.25.1

[PATCH 4.4 22/54] regmap: dev_get_regmap_match(): fix string comparison

[Greg Kroah-Hartman]

From: Marc Kleine-Budde <mkl@pengutronix.de>

[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]

This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.

The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.

Fix this by using strcmp() instead.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 77cabde977edd..4a4efc6f54b55 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1106,7 +1106,7 @@ static int dev_get_regmap_match(struct device *dev, void *res, void *data)
 
 	/* If the user didn't specify a name match any */
 	if (data)
-		return (*r)->name == data;
+		return !strcmp((*r)->name, data);
 	else
 		return 1;
 }
-- 
2.25.1

[PATCH 4.4 23/54] usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()

[Greg Kroah-Hartman]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]

gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/gr_udc.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 594639e5cbf82..78168e1827b5e 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2001,9 +2001,12 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
 
 	if (num == 0) {
 		_req = gr_alloc_request(&ep->ep, GFP_ATOMIC);
+		if (!_req)
+			return -ENOMEM;
+
 		buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC);
-		if (!_req || !buf) {
-			/* possible _req freed by gr_probe via gr_remove */
+		if (!buf) {
+			gr_free_request(&ep->ep, _req);
 			return -ENOMEM;
 		}
 
-- 
2.25.1

[PATCH 4.4 24/54] arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP

[Greg Kroah-Hartman]

From: Will Deacon <will@kernel.org>

[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]

Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/debug-monitors.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 8e7675e5ce4a5..77fbcabcd9e34 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -387,13 +387,13 @@ void user_rewind_single_step(struct task_struct *task)
 	 * If single step is active for this thread, then set SPSR.SS
 	 * to 1 to avoid returning to the active-pending state.
 	 */
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		set_regs_spsr_ss(task_pt_regs(task));
 }
 
 void user_fastforward_single_step(struct task_struct *task)
 {
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		clear_regs_spsr_ss(task_pt_regs(task));
 }
 
-- 
2.25.1

[PATCH 4.4 25/54] x86: math-emu: Fix up cmp insn for clang ias

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]

The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:

arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
 cmp $0xffffffff,-24(%ebp)
 ^

Make this a 32-bit comparison, which it was clearly meant to be.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/math-emu/wm_sqrt.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/math-emu/wm_sqrt.S
+++ b/arch/x86/math-emu/wm_sqrt.S
@@ -208,7 +208,7 @@ sqrt_stage_2_finish:
 
 #ifdef PARANOID
 /* It should be possible to get here only if the arg is ffff....ffff */
-	cmp	$0xffffffff,FPU_fsqrt_arg_1
+	cmpl	$0xffffffff,FPU_fsqrt_arg_1
 	jnz	sqrt_stage_2_error
 #endif /* PARANOID */
 

[PATCH 4.4 26/54] Revert "cifs: Fix the target file was deleted when rename failed."

[Greg Kroah-Hartman]

From: Steve French <stfrench@microsoft.com>

commit 0e6705182d4e1b77248a93470d6d7b3013d59b30 upstream.

This reverts commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2.

Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.

The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Patrick Fernie <patrick.fernie@gmail.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/inode.c |   10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1737,7 +1737,6 @@ cifs_rename2(struct inode *source_dir, s
 	FILE_UNIX_BASIC_INFO *info_buf_target;
 	unsigned int xid;
 	int rc, tmprc;
-	bool new_target = d_really_is_negative(target_dentry);
 
 	if (flags & ~RENAME_NOREPLACE)
 		return -EINVAL;
@@ -1814,13 +1813,8 @@ cifs_rename2(struct inode *source_dir, s
 	 */
 
 unlink_target:
-	/*
-	 * If the target dentry was created during the rename, try
-	 * unlinking it if it's not negative
-	 */
-	if (new_target &&
-	    d_really_is_positive(target_dentry) &&
-	    (rc == -EACCES || rc == -EEXIST)) {
+	/* Try unlinking the target dentry if it's not negative */
+	if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) {
 		if (d_is_dir(target_dentry))
 			tmprc = cifs_rmdir(target_dir, target_dentry);
 		else

[PATCH 4.4 27/54] staging: wlan-ng: properly check endpoint types

[Greg Kroah-Hartman]

From: Rustam Kovhaev <rkovhaev@gmail.com>

commit faaff9765664009c1c7c65551d32e9ed3b1dda8f upstream.

As syzkaller detected, wlan-ng driver does not do sanity check of
endpoints in prism2sta_probe_usb(), add check for xfer direction and type

Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/wlan-ng/prism2usb.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -60,11 +60,25 @@ static int prism2sta_probe_usb(struct us
 			       const struct usb_device_id *id)
 {
 	struct usb_device *dev;
-
+	const struct usb_endpoint_descriptor *epd;
+	const struct usb_host_interface *iface_desc = interface->cur_altsetting;
 	wlandevice_t *wlandev = NULL;
 	hfa384x_t *hw = NULL;
 	int result = 0;
 
+	if (iface_desc->desc.bNumEndpoints != 2) {
+		result = -ENODEV;
+		goto failed;
+	}
+
+	result = -EINVAL;
+	epd = &iface_desc->endpoint[1].desc;
+	if (!usb_endpoint_is_bulk_in(epd))
+		goto failed;
+	epd = &iface_desc->endpoint[2].desc;
+	if (!usb_endpoint_is_bulk_out(epd))
+		goto failed;
+
 	dev = interface_to_usbdev(interface);
 	wlandev = create_wlan();
 	if (wlandev == NULL) {

[PATCH 4.4 28/54] staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit 0bd0db42a030b75c20028c7ba6e327b9cb554116 upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/addi_apci_1032.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -115,14 +115,22 @@ static int apci1032_cos_insn_config(stru
 				    unsigned int *data)
 {
 	struct apci1032_private *devpriv = dev->private;
-	unsigned int shift, oldmask;
+	unsigned int shift, oldmask, himask, lomask;
 
 	switch (data[0]) {
 	case INSN_CONFIG_DIGITAL_TRIG:
 		if (data[1] != 0)
 			return -EINVAL;
 		shift = data[3];
-		oldmask = (1U << shift) - 1;
+		if (shift < 32) {
+			oldmask = (1U << shift) - 1;
+			himask = data[4] << shift;
+			lomask = data[5] << shift;
+		} else {
+			oldmask = 0xffffffffu;
+			himask = 0;
+			lomask = 0;
+		}
 		switch (data[2]) {
 		case COMEDI_DIGITAL_TRIG_DISABLE:
 			devpriv->ctrl = 0;
@@ -145,8 +153,8 @@ static int apci1032_cos_insn_config(stru
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
 			if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
@@ -163,8 +171,8 @@ static int apci1032_cos_insn_config(stru
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		default:
 			return -EINVAL;

[PATCH 4.4 29/54] staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit f07804ec77d77f8a9dcf570a24154e17747bc82f upstream.

`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice.  When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger.  When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.

If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers.  Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.

Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_6527.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -341,7 +341,7 @@ static int ni6527_intr_insn_config(struc
 		case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
 			/* check shift amount */
 			shift = data[3];
-			if (shift >= s->n_chan) {
+			if (shift >= 32) {
 				mask = 0;
 				rising = 0;
 				falling = 0;

[PATCH 4.4 30/54] staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit fc846e9db67c7e808d77bf9e2ef3d49e3820ce5d upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity.  Only channels 0 to 15
are valid.

Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/addi_apci_1500.c |   24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -461,13 +461,14 @@ static int apci1500_di_cfg_trig(struct c
 	struct apci1500_private *devpriv = dev->private;
 	unsigned int trig = data[1];
 	unsigned int shift = data[3];
-	unsigned int hi_mask = data[4] << shift;
-	unsigned int lo_mask = data[5] << shift;
-	unsigned int chan_mask = hi_mask | lo_mask;
-	unsigned int old_mask = (1 << shift) - 1;
+	unsigned int hi_mask;
+	unsigned int lo_mask;
+	unsigned int chan_mask;
+	unsigned int old_mask;
 	unsigned int pm;
 	unsigned int pt;
 	unsigned int pp;
+	unsigned int invalid_chan;
 
 	if (trig > 1) {
 		dev_dbg(dev->class_dev,
@@ -475,7 +476,20 @@ static int apci1500_di_cfg_trig(struct c
 		return -EINVAL;
 	}
 
-	if (chan_mask > 0xffff) {
+	if (shift <= 16) {
+		hi_mask = data[4] << shift;
+		lo_mask = data[5] << shift;
+		old_mask = (1U << shift) - 1;
+		invalid_chan = (data[4] | data[5]) >> (16 - shift);
+	} else {
+		hi_mask = 0;
+		lo_mask = 0;
+		old_mask = 0xffff;
+		invalid_chan = data[4] | data[5];
+	}
+	chan_mask = hi_mask | lo_mask;
+
+	if (invalid_chan) {
 		dev_dbg(dev->class_dev, "invalid digital trigger channel\n");
 		return -EINVAL;
 	}

[PATCH 4.4 31/54] staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift

[Greg Kroah-Hartman]

From: Ian Abbott <abbotti@mev.co.uk>

commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/addi_apci_1564.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -288,14 +288,22 @@ static int apci1564_cos_insn_config(stru
 				    unsigned int *data)
 {
 	struct apci1564_private *devpriv = dev->private;
-	unsigned int shift, oldmask;
+	unsigned int shift, oldmask, himask, lomask;
 
 	switch (data[0]) {
 	case INSN_CONFIG_DIGITAL_TRIG:
 		if (data[1] != 0)
 			return -EINVAL;
 		shift = data[3];
-		oldmask = (1U << shift) - 1;
+		if (shift < 32) {
+			oldmask = (1U << shift) - 1;
+			himask = data[4] << shift;
+			lomask = data[5] << shift;
+		} else {
+			oldmask = 0xffffffffu;
+			himask = 0;
+			lomask = 0;
+		}
 		switch (data[2]) {
 		case COMEDI_DIGITAL_TRIG_DISABLE:
 			devpriv->ctrl = 0;
@@ -319,8 +327,8 @@ static int apci1564_cos_insn_config(stru
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
 			if (devpriv->ctrl != (APCI1564_DI_IRQ_ENA |
@@ -337,8 +345,8 @@ static int apci1564_cos_insn_config(stru
 				devpriv->mode2 &= oldmask;
 			}
 			/* configure specified channels */
-			devpriv->mode1 |= data[4] << shift;
-			devpriv->mode2 |= data[5] << shift;
+			devpriv->mode1 |= himask;
+			devpriv->mode2 |= lomask;
 			break;
 		default:
 			return -EINVAL;

[PATCH 4.4 32/54] serial: 8250: fix null-ptr-deref in serial8250_start_tx()

[Greg Kroah-Hartman]

From: Yang Yingliang <yangyingliang@huawei.com>

commit f4c23a140d80ef5e6d3d1f8f57007649014b60fa upstream.

I got null-ptr-deref in serial8250_start_tx():

[   78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   78.123778] Mem abort info:
[   78.126560]   ESR = 0x86000007
[   78.129603]   EC = 0x21: IABT (current EL), IL = 32 bits
[   78.134891]   SET = 0, FnV = 0
[   78.137933]   EA = 0, S1PTW = 0
[   78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600
[   78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000
[   78.160029] Internal error: Oops: 86000007 [#1] SMP
[   78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd
[   78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48
[   78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020
[   78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[   78.228435] pc : 0x0
[   78.230618] lr : serial8250_start_tx+0x160/0x260
[   78.235215] sp : ffff800062eefb80
[   78.238517] x29: ffff800062eefb80 x28: 0000000000000fff
[   78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000
[   78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000
[   78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002
[   78.259679] x21: 0000000000000001 x20: 0000000000000000
[   78.264969] x19: ffffa688827eecc8 x18: 0000000000000000
[   78.270259] x17: 0000000000000000 x16: 0000000000000000
[   78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6
[   78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539
[   78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0
[   78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88
[   78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000
[   78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8
[   78.307292] x3 : 0000000000000000 x2 : 0000000000000002
[   78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8
[   78.317873] Call trace:
[   78.320312]  0x0
[   78.322147]  __uart_start.isra.9+0x64/0x78
[   78.326229]  uart_start+0xb8/0x1c8
[   78.329620]  uart_flush_chars+0x24/0x30
[   78.333442]  n_tty_receive_buf_common+0x7b0/0xc30
[   78.338128]  n_tty_receive_buf+0x44/0x2c8
[   78.342122]  tty_ioctl+0x348/0x11f8
[   78.345599]  ksys_ioctl+0xd8/0xf8
[   78.348903]  __arm64_sys_ioctl+0x2c/0xc8
[   78.352812]  el0_svc_common.constprop.2+0x88/0x1b0
[   78.357583]  do_el0_svc+0x44/0xd0
[   78.360887]  el0_sync_handler+0x14c/0x1d0
[   78.364880]  el0_sync+0x140/0x180
[   78.368185] Code: bad PC value

SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -530,6 +530,7 @@ static void __init serial8250_isa_init_p
 		 */
 		up->mcr_mask = ~ALPHA_KLUDGE_MCR;
 		up->mcr_force = ALPHA_KLUDGE_MCR;
+		serial8250_set_defaults(up);
 	}
 
 	/* chain base port ops to support Remote Supervisor Adapter */
@@ -553,7 +554,6 @@ static void __init serial8250_isa_init_p
 		port->membase  = old_serial_port[i].iomem_base;
 		port->iotype   = old_serial_port[i].io_type;
 		port->regshift = old_serial_port[i].iomem_reg_shift;
-		serial8250_set_defaults(up);
 
 		port->irqflags |= irqflag;
 		if (serial8250_isa_config != NULL)

[PATCH 4.4 33/54] serial: 8250_mtk: Fix high-speed baud rates clamping

[Greg Kroah-Hartman]

From: Serge Semin <Sergey.Semin@baikalelectronics.ru>

commit 551e553f0d4ab623e2a6f424ab5834f9c7b5229c upstream.

Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.

Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.

A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.

Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com

Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: stable <stable@vger.kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_mtk.c |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -47,8 +47,21 @@ mtk8250_set_termios(struct uart_port *po
 	struct uart_8250_port *up =
 		container_of(port, struct uart_8250_port, port);
 
+	/*
+	 * Store the requested baud rate before calling the generic 8250
+	 * set_termios method. Standard 8250 port expects bauds to be
+	 * no higher than (uartclk / 16) so the baud will be clamped if it
+	 * gets out of that bound. Mediatek 8250 port supports speed
+	 * higher than that, therefore we'll get original baud rate back
+	 * after calling the generic set_termios method and recalculate
+	 * the speed later in this method.
+	 */
+	baud = tty_termios_baud_rate(termios);
+
 	serial8250_do_set_termios(port, termios, old);
 
+	tty_termios_encode_baud_rate(termios, baud, baud);
+
 	/*
 	 * Mediatek UARTs use an extra highspeed register (UART_MTK_HIGHS)
 	 *
@@ -91,6 +104,11 @@ mtk8250_set_termios(struct uart_port *po
 	 */
 	spin_lock_irqsave(&port->lock, flags);
 
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
 	/* set DLAB we have cval saved in up->lcr from the call to the core */
 	serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
 	serial_dl_write(up, quot);

[PATCH 4.4 34/54] mm/memcg: fix refcount error while moving and swapping

[Greg Kroah-Hartman]

From: Hugh Dickins <hughd@google.com>

commit 8d22a9351035ef2ff12ef163a1091b8b8cf1e49c upstream.

It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.

This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).

Just skip that optimization: do that part of the accounting immediately.

Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2007071431050.4726@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4889,7 +4889,6 @@ static void __mem_cgroup_clear_mc(void)
 		if (!mem_cgroup_is_root(mc.to))
 			page_counter_uncharge(&mc.to->memory, mc.moved_swap);
 
-		mem_cgroup_id_get_many(mc.to, mc.moved_swap);
 		css_put_many(&mc.to->css, mc.moved_swap);
 
 		mc.moved_swap = 0;
@@ -5067,7 +5066,8 @@ put:			/* get_mctgt_type() gets the page
 			ent = target.ent;
 			if (!mem_cgroup_move_swap_account(ent, mc.from, mc.to)) {
 				mc.precharge--;
-				/* we fixup refcnts and charges later. */
+				mem_cgroup_id_get_many(mc.to, 1);
+				/* we fixup other refcnts and charges later. */
 				mc.moved_swap++;
 			}
 			break;

[PATCH 4.4 35/54] parisc: Add atomic64_set_release() define to avoid CPU soft lockups

[Greg Kroah-Hartman]

From: John David Anglin <dave.anglin@bell.net>

commit be6577af0cef934ccb036445314072e8cb9217b9 upstream.

Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:

watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
 IAOQ[0]: d_alloc_parallel+0x384/0x688
 IAOQ[1]: d_alloc_parallel+0x388/0x688
 RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
 [<000000004036974c>] __lookup_slow+0xa4/0x200
 [<0000000040369fc8>] walk_component+0x288/0x458
 [<000000004036a9a0>] path_lookupat+0x88/0x198
 [<000000004036e748>] filename_lookup+0xa0/0x168
 [<000000004036e95c>] user_path_at_empty+0x64/0x80
 [<000000004035d93c>] vfs_statx+0x104/0x158
 [<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
 [<000000004035e5a0>] sys_lstat64+0x20/0x38
 [<0000000040180054>] syscall_exit+0x0/0x14

The code was stuck in this loop in d_alloc_parallel:

    4037d414:   0e 00 10 dc     ldd 0(r16),ret0
    4037d418:   c7 fc 5f ed     bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
    4037d41c:   08 00 02 40     nop

This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:

static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
        /*
         * Assuming the lock is uncontended, this never enters
         * the body of the outer loop. If it is contended, then
         * within the inner loop a non-atomic test is used to
         * busywait with less bus contention for a good time to
         * attempt to acquire the lock bit.
         */
        preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
        while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
                preempt_enable();
                do {
                        cpu_relax();
                } while (test_bit(bitnum, addr));
                preempt_disable();
        }
#endif
        __acquire(bitlock);
}

After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.

Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/parisc/include/asm/atomic.h |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -208,6 +208,8 @@ atomic64_set(atomic64_t *v, s64 i)
 	_atomic_spin_unlock_irqrestore(v, flags);
 }
 
+#define atomic64_set_release(v, i)	atomic64_set((v), (i))
+
 static __inline__ s64
 atomic64_read(const atomic64_t *v)
 {

[PATCH 4.4 36/54] ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

[Greg Kroah-Hartman]

From: Qiujun Huang <hqjagain@gmail.com>

commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.

In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.

The case reported by syzbot:
https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0

Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829

Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com
Cc: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |   48 +++++++++++++++++++++++--------
 drivers/net/wireless/ath/ath9k/hif_usb.h |    5 +++
 2 files changed, 42 insertions(+), 11 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -639,9 +639,9 @@ err:
 
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	int ret;
 
 	if (!skb)
@@ -681,14 +681,15 @@ resubmit:
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 }
 
 static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
-	struct sk_buff *skb = (struct sk_buff *) urb->context;
+	struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+	struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+	struct sk_buff *skb = rx_buf->skb;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev =
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
 	if (!skb)
@@ -746,6 +747,7 @@ resubmit:
 	return;
 free:
 	kfree_skb(skb);
+	kfree(rx_buf);
 	urb->context = NULL;
 }
 
@@ -791,7 +793,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(s
 	init_usb_anchor(&hif_dev->mgmt_submitted);
 
 	for (i = 0; i < MAX_TX_URB_NUM; i++) {
-		tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+		tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
 		if (!tx_buf)
 			goto err;
 
@@ -828,8 +830,9 @@ static void ath9k_hif_usb_dealloc_rx_urb
 
 static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->rx_submitted);
@@ -837,6 +840,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(s
 
 	for (i = 0; i < MAX_RX_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -851,11 +860,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(s
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_bulk_urb(urb, hif_dev->udev,
 				  usb_rcvbulkpipe(hif_dev->udev,
 						  USB_WLAN_RX_PIPE),
 				  skb->data, MAX_RX_BUF_SIZE,
-				  ath9k_hif_usb_rx_cb, skb);
+				  ath9k_hif_usb_rx_cb, rx_buf);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -881,6 +893,8 @@ err_submit:
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 	return ret;
 }
@@ -892,14 +906,21 @@ static void ath9k_hif_usb_dealloc_reg_in
 
 static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
 {
-	struct urb *urb = NULL;
+	struct rx_buf *rx_buf = NULL;
 	struct sk_buff *skb = NULL;
+	struct urb *urb = NULL;
 	int i, ret;
 
 	init_usb_anchor(&hif_dev->reg_in_submitted);
 
 	for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
 
+		rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+		if (!rx_buf) {
+			ret = -ENOMEM;
+			goto err_rxb;
+		}
+
 		/* Allocate URB */
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		if (urb == NULL) {
@@ -914,11 +935,14 @@ static int ath9k_hif_usb_alloc_reg_in_ur
 			goto err_skb;
 		}
 
+		rx_buf->hif_dev = hif_dev;
+		rx_buf->skb = skb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				  usb_rcvintpipe(hif_dev->udev,
 						  USB_REG_IN_PIPE),
 				  skb->data, MAX_REG_IN_BUF_SIZE,
-				  ath9k_hif_usb_reg_in_cb, skb, 1);
+				  ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 
 		/* Anchor URB */
 		usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -944,6 +968,8 @@ err_submit:
 err_skb:
 	usb_free_urb(urb);
 err_urb:
+	kfree(rx_buf);
+err_rxb:
 	ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
 	return ret;
 }
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -84,6 +84,11 @@ struct tx_buf {
 	struct list_head list;
 };
 
+struct rx_buf {
+	struct sk_buff *skb;
+	struct hif_device_usb *hif_dev;
+};
+
 #define HIF_USB_TX_STOP  BIT(0)
 #define HIF_USB_TX_FLUSH BIT(1)
 

[PATCH 4.4 37/54] ath9k: Fix regression with Atheros 9271

[Greg Kroah-Hartman]

From: Mark O'Donovan <shiftee@posteo.net>

commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.

This fix allows ath9k_htc modules to connect to WLAN once again.

Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Reported-by: Roman Mamedov <rm@romanrm.net>
Tested-by: Viktor Jägersküpper <viktor_jaegerskuepper@freenet.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/hif_usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -729,11 +729,13 @@ static void ath9k_hif_usb_reg_in_cb(stru
 			return;
 		}
 
+		rx_buf->skb = nskb;
+
 		usb_fill_int_urb(urb, hif_dev->udev,
 				 usb_rcvintpipe(hif_dev->udev,
 						 USB_REG_IN_PIPE),
 				 nskb->data, MAX_REG_IN_BUF_SIZE,
-				 ath9k_hif_usb_reg_in_cb, nskb, 1);
+				 ath9k_hif_usb_reg_in_cb, rx_buf, 1);
 	}
 
 resubmit:

[PATCH 4.4 38/54] AX.25: Fix out-of-bounds read in ax25_connect()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit 2f2a7ffad5c6cbf3d438e813cfdc88230e185ba6 ]

Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient.
ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis`
equals to 7 or 8. Fix it.

This issue has been reported as a KMSAN uninit-value bug, because in such
a case, ax25_connect() reaches into the uninitialized portion of the
`struct sockaddr_storage` statically allocated in __sys_connect().

It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`.

Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1191,7 +1191,9 @@ static int __must_check ax25_connect(str
 	if (addr_len > sizeof(struct sockaddr_ax25) &&
 	    fsa->fsa_ax25.sax25_ndigis != 0) {
 		/* Valid number of digipeaters ? */
-		if (fsa->fsa_ax25.sax25_ndigis < 1 || fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS) {
+		if (fsa->fsa_ax25.sax25_ndigis < 1 ||
+		    addr_len < sizeof(struct sockaddr_ax25) +
+		    sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) {
 			err = -EINVAL;
 			goto out_release;
 		}

[PATCH 4.4 39/54] AX.25: Prevent out-of-bounds read in ax25_sendmsg()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit 8885bb0621f01a6c82be60a91e5fc0f6e2f71186 ]

Checks on `addr_len` and `usax->sax25_ndigis` are insufficient.
ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7
or 8. Fix it.

It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since
`addr_len` is guaranteed to be less than or equal to
`sizeof(struct full_sockaddr_ax25)`

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1512,7 +1512,8 @@ static int ax25_sendmsg(struct socket *s
 			struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
 
 			/* Valid number of digipeaters ? */
-			if (usax->sax25_ndigis < 1 || usax->sax25_ndigis > AX25_MAX_DIGIS) {
+			if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) +
+			    sizeof(ax25_address) * usax->sax25_ndigis) {
 				err = -EINVAL;
 				goto out;
 			}

[PATCH 4.4 40/54] net-sysfs: add a newline when printing tx_timeout by sysfs

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit 9bb5fbea59f36a589ef886292549ca4052fe676c ]

When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to
add a newline for easy reading.

root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout
0root@syzkaller:~#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/net-sysfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -999,7 +999,7 @@ static ssize_t show_trans_timeout(struct
 	trans_timeout = queue->trans_timeout;
 	spin_unlock_irq(&queue->_xmit_lock);
 
-	return sprintf(buf, "%lu", trans_timeout);
+	return sprintf(buf, fmt_ulong, trans_timeout);
 }
 
 #ifdef CONFIG_XPS

[PATCH 4.4 41/54] net: udp: Fix wrong clean up for IS_UDPLITE macro

[Greg Kroah-Hartman]

From: Miaohe Lin <linmiaohe@huawei.com>

[ Upstream commit b0a422772fec29811e293c7c0e6f991c0fd9241d ]

We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is
checked.

Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/udp.c |    2 +-
 net/ipv6/udp.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1558,7 +1558,7 @@ int udp_queue_rcv_skb(struct sock *sk, s
 	/*
 	 * 	UDP-Lite specific tests, ignored on UDP sockets
 	 */
-	if ((is_udplite & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
+	if ((up->pcflag & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
 
 		/*
 		 * MIB statistics other than incrementing the error count are
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -672,7 +672,7 @@ int udpv6_queue_rcv_skb(struct sock *sk,
 	/*
 	 * UDP-Lite specific tests, ignored on UDP sockets (see net/ipv4/udp.c).
 	 */
-	if ((is_udplite & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
+	if ((up->pcflag & UDPLITE_RECV_CC)  &&  UDP_SKB_CB(skb)->partial_cov) {
 
 		if (up->pcrlen == 0) {          /* full coverage was set  */
 			net_dbg_ratelimited("UDPLITE6: partial coverage %d while full coverage %d requested\n",

[PATCH 4.4 42/54] AX.25: Prevent integer overflows in connect and sendmsg

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 17ad73e941b71f3bec7523ea4e9cbc3752461c2d ]

We recently added some bounds checking in ax25_connect() and
ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because
they were no longer required.

Unfortunately, I believe they are required to prevent integer overflows
so I have added them back.

Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()")
Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ax25/af_ax25.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1192,6 +1192,7 @@ static int __must_check ax25_connect(str
 	    fsa->fsa_ax25.sax25_ndigis != 0) {
 		/* Valid number of digipeaters ? */
 		if (fsa->fsa_ax25.sax25_ndigis < 1 ||
+		    fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS ||
 		    addr_len < sizeof(struct sockaddr_ax25) +
 		    sizeof(ax25_address) * fsa->fsa_ax25.sax25_ndigis) {
 			err = -EINVAL;
@@ -1512,7 +1513,9 @@ static int ax25_sendmsg(struct socket *s
 			struct full_sockaddr_ax25 *fsa = (struct full_sockaddr_ax25 *)usax;
 
 			/* Valid number of digipeaters ? */
-			if (usax->sax25_ndigis < 1 || addr_len < sizeof(struct sockaddr_ax25) +
+			if (usax->sax25_ndigis < 1 ||
+			    usax->sax25_ndigis > AX25_MAX_DIGIS ||
+			    addr_len < sizeof(struct sockaddr_ax25) +
 			    sizeof(ax25_address) * usax->sax25_ndigis) {
 				err = -EINVAL;
 				goto out;

[PATCH 4.4 43/54] tcp: allow at most one TLP probe per flight

[Greg Kroah-Hartman]

From: Yuchung Cheng <ycheng@google.com>

[ Upstream commit 76be93fc0702322179bb0ea87295d820ee46ad14 ]

Previously TLP may send multiple probes of new data in one
flight. This happens when the sender is cwnd limited. After the
initial TLP containing new data is sent, the sender receives another
ACK that acks partial inflight.  It may re-arm another TLP timer
to send more, if no further ACK returns before the next TLP timeout
(PTO) expires. The sender may send in theory a large amount of TLP
until send queue is depleted. This only happens if the sender sees
such irregular uncommon ACK pattern. But it is generally undesirable
behavior during congestion especially.

The original TLP design restrict only one TLP probe per inflight as
published in "Reducing Web Latency: the Virtue of Gentle Aggression",
SIGCOMM 2013. This patch changes TLP to send at most one probe
per inflight.

Note that if the sender is app-limited, TLP retransmits old data
and did not have this issue.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/tcp.h   |    5 +++--
 net/ipv4/tcp_input.c  |   11 ++++++-----
 net/ipv4/tcp_output.c |   13 ++++++++-----
 3 files changed, 17 insertions(+), 12 deletions(-)

--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -211,7 +211,8 @@ struct tcp_sock {
 		u8 reord;    /* reordering detected */
 	} rack;
 	u16	advmss;		/* Advertised MSS			*/
-	u8	unused;
+	u8	tlp_retrans:1,	/* TLP is a retransmission */
+		unused_1:7;
 	u8	nonagle     : 4,/* Disable Nagle algorithm?             */
 		thin_lto    : 1,/* Use linear timeouts for thin streams */
 		thin_dupack : 1,/* Fast retransmit on first dupack      */
@@ -225,7 +226,7 @@ struct tcp_sock {
 		syn_data_acked:1,/* data in SYN is acked by SYN-ACK */
 		save_syn:1,	/* Save headers of SYN packet */
 		is_cwnd_limited:1;/* forward progress limited by snd_cwnd? */
-	u32	tlp_high_seq;	/* snd_nxt at the time of TLP retransmit. */
+	u32	tlp_high_seq;	/* snd_nxt at the time of TLP */
 
 /* RTT measurement */
 	u32	srtt_us;	/* smoothed round trip time << 3 in usecs */
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3517,10 +3517,8 @@ static void tcp_replace_ts_recent(struct
 	}
 }
 
-/* This routine deals with acks during a TLP episode.
- * We mark the end of a TLP episode on receiving TLP dupack or when
- * ack is after tlp_high_seq.
- * Ref: loss detection algorithm in draft-dukkipati-tcpm-tcp-loss-probe.
+/* This routine deals with acks during a TLP episode and ends an episode by
+ * resetting tlp_high_seq. Ref: TLP algorithm in draft-ietf-tcpm-rack
  */
 static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag)
 {
@@ -3529,7 +3527,10 @@ static void tcp_process_tlp_ack(struct s
 	if (before(ack, tp->tlp_high_seq))
 		return;
 
-	if (flag & FLAG_DSACKING_ACK) {
+	if (!tp->tlp_retrans) {
+		/* TLP of new data has been acknowledged */
+		tp->tlp_high_seq = 0;
+	} else if (flag & FLAG_DSACKING_ACK) {
 		/* This DSACK means original and TLP probe arrived; no loss */
 		tp->tlp_high_seq = 0;
 	} else if (after(ack, tp->tlp_high_seq)) {
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2271,6 +2271,11 @@ void tcp_send_loss_probe(struct sock *sk
 	int pcount;
 	int mss = tcp_current_mss(sk);
 
+	/* At most one outstanding TLP */
+	if (tp->tlp_high_seq)
+		goto rearm_timer;
+
+	tp->tlp_retrans = 0;
 	skb = tcp_send_head(sk);
 	if (skb) {
 		if (tcp_snd_wnd_test(tp, skb, mss)) {
@@ -2293,10 +2298,6 @@ void tcp_send_loss_probe(struct sock *sk
 		return;
 	}
 
-	/* At most one outstanding TLP retransmission. */
-	if (tp->tlp_high_seq)
-		goto rearm_timer;
-
 	if (skb_still_in_host_queue(sk, skb))
 		goto rearm_timer;
 
@@ -2317,10 +2318,12 @@ void tcp_send_loss_probe(struct sock *sk
 	if (__tcp_retransmit_skb(sk, skb))
 		goto rearm_timer;
 
+	tp->tlp_retrans = 1;
+
+probe_sent:
 	/* Record snd_nxt for loss detection. */
 	tp->tlp_high_seq = tp->snd_nxt;
 
-probe_sent:
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPLOSSPROBES);
 	/* Reset s.t. tcp_rearm_rto will restart timer from now */
 	inet_csk(sk)->icsk_pending = 0;

[PATCH 4.4 44/54] rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA

[Greg Kroah-Hartman]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 639f181f0ee20d3249dbc55f740f0167267180f0 ]

rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if
rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read.

Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read
as this particular error doesn't get stored in ->sk_err by the networking
core.

Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive
errors (there's no way for it to report which call, if any, the error was
caused by).

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/ar-output.c  |    2 +-
 net/rxrpc/ar-recvmsg.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/net/rxrpc/ar-output.c
+++ b/net/rxrpc/ar-output.c
@@ -533,7 +533,7 @@ static int rxrpc_send_data(struct rxrpc_
 	/* this should be in poll */
 	sk_clear_bit(SOCKWQ_ASYNC_NOSPACE, sk);
 
-	if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))
+	if (sk->sk_shutdown & SEND_SHUTDOWN)
 		return -EPIPE;
 
 	more = msg->msg_flags & MSG_MORE;
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -78,7 +78,7 @@ int rxrpc_recvmsg(struct socket *sock, s
 				release_sock(&rx->sk);
 				if (continue_call)
 					rxrpc_put_call(continue_call);
-				return -ENODATA;
+				return -EAGAIN;
 			}
 		}
 

[PATCH 4.4 45/54] ip6_gre: fix null-ptr-deref in ip6gre_init_net()

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

[ Upstream commit 46ef5b89ec0ecf290d74c4aee844f063933c4da4 ]

KASAN report null-ptr-deref error when register_netdev() failed:

KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7]
CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12
Call Trace:
 ip6gre_init_net+0x4ab/0x580
 ? ip6gre_tunnel_uninit+0x3f0/0x3f0
 ops_init+0xa8/0x3c0
 setup_net+0x2de/0x7e0
 ? rcu_read_lock_bh_held+0xb0/0xb0
 ? ops_init+0x3c0/0x3c0
 ? kasan_unpoison_shadow+0x33/0x40
 ? __kasan_kmalloc.constprop.0+0xc2/0xd0
 copy_net_ns+0x27d/0x530
 create_new_namespaces+0x382/0xa30
 unshare_nsproxy_namespaces+0xa1/0x1d0
 ksys_unshare+0x39c/0x780
 ? walk_process_tree+0x2a0/0x2a0
 ? trace_hardirqs_on+0x4a/0x1b0
 ? _raw_spin_unlock_irq+0x1f/0x30
 ? syscall_trace_enter+0x1a7/0x330
 ? do_syscall_64+0x1c/0xa0
 __x64_sys_unshare+0x2d/0x40
 do_syscall_64+0x56/0xa0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later
access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving
'ign->fb_tunnel_dev' to local variable ndev.

Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_gre.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -1355,15 +1355,16 @@ static void ip6gre_destroy_tunnels(struc
 static int __net_init ip6gre_init_net(struct net *net)
 {
 	struct ip6gre_net *ign = net_generic(net, ip6gre_net_id);
+	struct net_device *ndev;
 	int err;
 
-	ign->fb_tunnel_dev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0",
-					  NET_NAME_UNKNOWN,
-					  ip6gre_tunnel_setup);
-	if (!ign->fb_tunnel_dev) {
+	ndev = alloc_netdev(sizeof(struct ip6_tnl), "ip6gre0",
+			    NET_NAME_UNKNOWN, ip6gre_tunnel_setup);
+	if (!ndev) {
 		err = -ENOMEM;
 		goto err_alloc_dev;
 	}
+	ign->fb_tunnel_dev = ndev;
 	dev_net_set(ign->fb_tunnel_dev, net);
 	/* FB netdevice is special: we have one, and only one per netns.
 	 * Allowing to move it to another netns is clearly unsafe.
@@ -1383,7 +1384,7 @@ static int __net_init ip6gre_init_net(st
 	return 0;
 
 err_reg_dev:
-	ip6gre_dev_free(ign->fb_tunnel_dev);
+	ip6gre_dev_free(ndev);
 err_alloc_dev:
 	return err;
 }

[PATCH 4.4 46/54] drivers/net/wan/x25_asy: Fix to make it work

[Greg Kroah-Hartman]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 8fdcabeac39824fe67480fd9508d80161c541854 ]

This driver is not working because of problems of its receiving code.
This patch fixes it to make it work.

When the driver receives an LAPB frame, it should first pass the frame
to the LAPB module to process. After processing, the LAPB module passes
the data (the packet) back to the driver, the driver should then add a
one-byte pseudo header and pass the data to upper layers.

The changes to the "x25_asy_bump" function and the
"x25_asy_data_indication" function are to correctly implement this
procedure.

Also, the "x25_asy_unesc" function ignores any frame that is shorter
than 3 bytes. However the shortest frames are 2-byte long. So we need
to change it to allow 2-byte frames to pass.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Reviewed-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/x25_asy.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -186,7 +186,7 @@ static inline void x25_asy_unlock(struct
 	netif_wake_queue(sl->dev);
 }
 
-/* Send one completely decapsulated IP datagram to the IP layer. */
+/* Send an LAPB frame to the LAPB module to process. */
 
 static void x25_asy_bump(struct x25_asy *sl)
 {
@@ -198,13 +198,12 @@ static void x25_asy_bump(struct x25_asy
 	count = sl->rcount;
 	dev->stats.rx_bytes += count;
 
-	skb = dev_alloc_skb(count+1);
+	skb = dev_alloc_skb(count);
 	if (skb == NULL) {
 		netdev_warn(sl->dev, "memory squeeze, dropping packet\n");
 		dev->stats.rx_dropped++;
 		return;
 	}
-	skb_push(skb, 1);	/* LAPB internal control */
 	memcpy(skb_put(skb, count), sl->rbuff, count);
 	skb->protocol = x25_type_trans(skb, sl->dev);
 	err = lapb_data_received(skb->dev, skb);
@@ -212,7 +211,6 @@ static void x25_asy_bump(struct x25_asy
 		kfree_skb(skb);
 		printk(KERN_DEBUG "x25_asy: data received err - %d\n", err);
 	} else {
-		netif_rx(skb);
 		dev->stats.rx_packets++;
 	}
 }
@@ -358,12 +356,21 @@ static netdev_tx_t x25_asy_xmit(struct s
  */
 
 /*
- *	Called when I frame data arrives. We did the work above - throw it
- *	at the net layer.
+ *	Called when I frame data arrive. We add a pseudo header for upper
+ *	layers and pass it to upper layers.
  */
 
 static int x25_asy_data_indication(struct net_device *dev, struct sk_buff *skb)
 {
+	if (skb_cow(skb, 1)) {
+		kfree_skb(skb);
+		return NET_RX_DROP;
+	}
+	skb_push(skb, 1);
+	skb->data[0] = X25_IFACE_DATA;
+
+	skb->protocol = x25_type_trans(skb, dev);
+
 	return netif_rx(skb);
 }
 
@@ -655,7 +662,7 @@ static void x25_asy_unesc(struct x25_asy
 	switch (s) {
 	case X25_END:
 		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
-		    sl->rcount > 2)
+		    sl->rcount >= 2)
 			x25_asy_bump(sl);
 		clear_bit(SLF_ESCAPE, &sl->flags);
 		sl->rcount = 0;

[PATCH 4.4 47/54] Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation

[Greg Kroah-Hartman]

From: Fangrui Song <maskray@google.com>

commit ca9b31f6bb9c6aa9b4e5f0792f39a97bbffb8c51 upstream.

When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/.  --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.

GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.

To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.

Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).

Cc: stable@vger.kernel.org
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
[nc: Adjust context, CLANG_FLAGS does not exist in 4.4]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Makefile
+++ b/Makefile
@@ -607,7 +607,7 @@ ifeq ($(cc-name),clang)
 ifneq ($(CROSS_COMPILE),)
 CLANG_TARGET	:= --target=$(notdir $(CROSS_COMPILE:%-=%))
 GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
-CLANG_PREFIX	:= --prefix=$(GCC_TOOLCHAIN_DIR)
+CLANG_PREFIX	:= --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
 GCC_TOOLCHAIN	:= $(realpath $(GCC_TOOLCHAIN_DIR)/..)
 endif
 ifneq ($(GCC_TOOLCHAIN),)

[PATCH 4.4 48/54] regmap: debugfs: check count when read regmap file

[Greg Kroah-Hartman]

From: Peng Fan <peng.fan@nxp.com>

commit 74edd08a4fbf51d65fd8f4c7d8289cd0f392bd91 upstream.

When executing the following command, we met kernel dump.
dmesg -c > /dev/null; cd /sys;
for i in `ls /sys/kernel/debug/regmap/* -d`; do
	echo "Checking regmap in $i";
	cat $i/registers;
done && grep -ri "0x02d0" *;

It is because the count value is too big, and kmalloc fails. So add an
upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/base/regmap/regmap-debugfs.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/base/regmap/regmap-debugfs.c
+++ b/drivers/base/regmap/regmap-debugfs.c
@@ -194,6 +194,9 @@ static ssize_t regmap_read_debugfs(struc
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -342,6 +345,9 @@ static ssize_t regmap_reg_ranges_read_fi
 	if (*ppos < 0 || !count)
 		return -EINVAL;
 
+	if (count > (PAGE_SIZE << (MAX_ORDER - 1)))
+		count = PAGE_SIZE << (MAX_ORDER - 1);
+
 	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;

[PATCH 4.4 49/54] xfs: set format back to extents if xfs_bmap_extents_to_btree

[Greg Kroah-Hartman]

From: Eric Sandeen <sandeen@redhat.com>

commit 2c4306f719b083d17df2963bc761777576b8ad1b upstream.

If xfs_bmap_extents_to_btree fails in a mode where we call
xfs_iroot_realloc(-1) to de-allocate the root, set the
format back to extents.

Otherwise we can assume we can dereference ifp->if_broot
based on the XFS_DINODE_FMT_BTREE format, and crash.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199423
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[iwamatsu: backported to 4.4.y]
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/xfs/libxfs/xfs_bmap.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -793,6 +793,8 @@ xfs_bmap_extents_to_btree(
 	*logflagsp = 0;
 	if ((error = xfs_alloc_vextent(&args))) {
 		xfs_iroot_realloc(ip, -1, whichfork);
+		ASSERT(ifp->if_broot == NULL);
+		XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS);
 		xfs_btree_del_cursor(cur, XFS_BTREE_ERROR);
 		return error;
 	}

[PATCH 4.4 50/54] tools/lib/subcmd/pager.c: do not alias select() params

[Greg Kroah-Hartman]

From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

commit dfbc3c6cb747c074aa2ba0a10bbeea588d6dfda6 upstream.

[ Change applied file from tools/lib/subcmd/pager.c to
  tools/perf/util/pager.c ]

Use a separate fd set for select()-s exception fds param to fix the
following gcc warning:

  pager.c:36:12: error: passing argument 2 to restrict-qualified parameter aliases with argument 4 [-Werror=restrict]
    select(1, &in, NULL, &in, NULL);
              ^~~        ~~~

Link: http://lkml.kernel.org/r/20180101105626.7168-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/pager.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/tools/perf/util/pager.c
+++ b/tools/perf/util/pager.c
@@ -16,10 +16,13 @@ static void pager_preexec(void)
 	 * have real input
 	 */
 	fd_set in;
+	fd_set exception;
 
 	FD_ZERO(&in);
+	FD_ZERO(&exception);
 	FD_SET(0, &in);
-	select(1, &in, NULL, &in, NULL);
+	FD_SET(0, &exception);
+	select(1, &in, NULL, &exception, NULL);
 
 	setenv("LESS", "FRSX", 0);
 }

[PATCH 4.4 51/54] perf: Make perf able to build with latest libbfd

[Greg Kroah-Hartman]

From: Changbin Du <changbin.du@gmail.com>

commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream.

libbfd has changed the bfd_section_* macros to inline functions
bfd_section_<field> since 2019-09-18. See below two commits:
  o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html
  o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html

This fix make perf able to build with both old and new libbfd.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/srcline.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/tools/perf/util/srcline.c
+++ b/tools/perf/util/srcline.c
@@ -86,16 +86,30 @@ static void find_address_in_section(bfd
 	bfd_vma pc, vma;
 	bfd_size_type size;
 	struct a2l_data *a2l = data;
+	flagword flags;
 
 	if (a2l->found)
 		return;
 
-	if ((bfd_get_section_flags(abfd, section) & SEC_ALLOC) == 0)
+#ifdef bfd_get_section_flags
+	flags = bfd_get_section_flags(abfd, section);
+#else
+	flags = bfd_section_flags(section);
+#endif
+	if ((flags & SEC_ALLOC) == 0)
 		return;
 
 	pc = a2l->addr;
+#ifdef bfd_get_section_vma
 	vma = bfd_get_section_vma(abfd, section);
+#else
+	vma = bfd_section_vma(section);
+#endif
+#ifdef bfd_get_section_size
 	size = bfd_get_section_size(section);
+#else
+	size = bfd_section_size(section);
+#endif
 
 	if (pc < vma || pc >= vma + size)
 		return;

[PATCH 4.4 52/54] perf tools: Fix snprint warnings for gcc 8

[Greg Kroah-Hartman]

From: Jiri Olsa <jolsa@kernel.org>

commit 77f18153c080855e1c3fb520ca31a4e61530121d upstream.

[Add an additional sprintf replacement in tools/perf/builtin-script.c]

With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:

  tests/mem.c: In function ‘check’:
  tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
        up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
    snprintf(failure, sizeof failure, "unexpected %s", out);

The gcc docs says:

 To avoid the warning either use a bigger buffer or handle the
 function's return value which indicates whether or not its output
 has been truncated.

Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/builtin-script.c    |   24 ++++++++++++------------
 tools/perf/tests/attr.c        |    4 ++--
 tools/perf/tests/pmu.c         |    2 +-
 tools/perf/util/cgroup.c       |    2 +-
 tools/perf/util/parse-events.c |    4 ++--
 tools/perf/util/pmu.c          |    2 +-
 6 files changed, 19 insertions(+), 19 deletions(-)

--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -1245,7 +1245,7 @@ static int is_directory(const char *base
 	char path[PATH_MAX];
 	struct stat st;
 
-	sprintf(path, "%s/%s", base_path, dent->d_name);
+	scnprintf(path, PATH_MAX, "%s/%s", base_path, dent->d_name);
 	if (stat(path, &st))
 		return 0;
 
@@ -1426,8 +1426,8 @@ static int list_available_scripts(const
 		return -1;
 
 	for_each_lang(scripts_path, scripts_dir, lang_dirent) {
-		snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
-			 lang_dirent->d_name);
+		scnprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
+			  lang_dirent->d_name);
 		lang_dir = opendir(lang_path);
 		if (!lang_dir)
 			continue;
@@ -1436,8 +1436,8 @@ static int list_available_scripts(const
 			script_root = get_script_root(script_dirent, REPORT_SUFFIX);
 			if (script_root) {
 				desc = script_desc__findnew(script_root);
-				snprintf(script_path, MAXPATHLEN, "%s/%s",
-					 lang_path, script_dirent->d_name);
+				scnprintf(script_path, MAXPATHLEN, "%s/%s",
+					  lang_path, script_dirent->d_name);
 				read_script_info(desc, script_path);
 				free(script_root);
 			}
@@ -1473,7 +1473,7 @@ static int check_ev_match(char *dir_name
 	int match, len;
 	FILE *fp;
 
-	sprintf(filename, "%s/bin/%s-record", dir_name, scriptname);
+	scnprintf(filename, MAXPATHLEN, "%s/bin/%s-record", dir_name, scriptname);
 
 	fp = fopen(filename, "r");
 	if (!fp)
@@ -1549,8 +1549,8 @@ int find_scripts(char **scripts_array, c
 	}
 
 	for_each_lang(scripts_path, scripts_dir, lang_dirent) {
-		snprintf(lang_path, MAXPATHLEN, "%s/%s", scripts_path,
-			 lang_dirent->d_name);
+		scnprintf(lang_path, MAXPATHLEN, "%s/%s", scripts_path,
+			  lang_dirent->d_name);
 #ifdef NO_LIBPERL
 		if (strstr(lang_path, "perl"))
 			continue;
@@ -1605,8 +1605,8 @@ static char *get_script_path(const char
 		return NULL;
 
 	for_each_lang(scripts_path, scripts_dir, lang_dirent) {
-		snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
-			 lang_dirent->d_name);
+		scnprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
+			  lang_dirent->d_name);
 		lang_dir = opendir(lang_path);
 		if (!lang_dir)
 			continue;
@@ -1617,8 +1617,8 @@ static char *get_script_path(const char
 				free(__script_root);
 				closedir(lang_dir);
 				closedir(scripts_dir);
-				snprintf(script_path, MAXPATHLEN, "%s/%s",
-					 lang_path, script_dirent->d_name);
+				scnprintf(script_path, MAXPATHLEN, "%s/%s",
+					  lang_path, script_dirent->d_name);
 				return strdup(script_path);
 			}
 			free(__script_root);
--- a/tools/perf/tests/attr.c
+++ b/tools/perf/tests/attr.c
@@ -147,8 +147,8 @@ static int run_dir(const char *d, const
 	if (verbose)
 		vcnt++;
 
-	snprintf(cmd, 3*PATH_MAX, PYTHON " %s/attr.py -d %s/attr/ -p %s %.*s",
-		 d, d, perf, vcnt, v);
+	scnprintf(cmd, 3*PATH_MAX, PYTHON " %s/attr.py -d %s/attr/ -p %s %.*s",
+		  d, d, perf, vcnt, v);
 
 	return system(cmd) ? TEST_FAIL : TEST_OK;
 }
--- a/tools/perf/tests/pmu.c
+++ b/tools/perf/tests/pmu.c
@@ -95,7 +95,7 @@ static char *test_format_dir_get(void)
 		struct test_format *format = &test_formats[i];
 		FILE *file;
 
-		snprintf(name, PATH_MAX, "%s/%s", dir, format->name);
+		scnprintf(name, PATH_MAX, "%s/%s", dir, format->name);
 
 		file = fopen(name, "w");
 		if (!file)
--- a/tools/perf/util/cgroup.c
+++ b/tools/perf/util/cgroup.c
@@ -64,7 +64,7 @@ static int open_cgroup(char *name)
 	if (cgroupfs_find_mountpoint(mnt, PATH_MAX + 1))
 		return -1;
 
-	snprintf(path, PATH_MAX, "%s/%s", mnt, name);
+	scnprintf(path, PATH_MAX, "%s/%s", mnt, name);
 
 	fd = open(path, O_RDONLY);
 	if (fd == -1)
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -194,8 +194,8 @@ struct tracepoint_path *tracepoint_id_to
 
 		for_each_event(sys_dirent, evt_dir, evt_dirent) {
 
-			snprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
-				 evt_dirent->d_name);
+			scnprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
+				  evt_dirent->d_name);
 			fd = open(evt_path, O_RDONLY);
 			if (fd < 0)
 				continue;
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -302,7 +302,7 @@ static int pmu_aliases_parse(char *dir,
 		if (pmu_alias_info_file(name))
 			continue;
 
-		snprintf(path, PATH_MAX, "%s/%s", dir, name);
+		scnprintf(path, PATH_MAX, "%s/%s", dir, name);
 
 		file = fopen(path, "r");
 		if (!file) {

[PATCH 4.4 53/54] perf annotate: Use asprintf when formatting objdump command line

[Greg Kroah-Hartman]

From: Arnaldo Carvalho de Melo <acme@redhat.com>

commit 6810158d526e483868e519befff407b91e76b3db upstream.

We were using a local buffer with an arbitrary size, that would have to
get increased to avoid truncation as warned by gcc 8:

  util/annotate.c: In function 'symbol__disassemble':
  util/annotate.c:1488:4: error: '%s' directive output may be truncated writing up to 4095 bytes into a region of size between 3966 and 8086 [-Werror=format-truncation=]
      "%s %s%s --start-address=0x%016" PRIx64
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  util/annotate.c:1498:20:
      symfs_filename, symfs_filename);
                      ~~~~~~~~~~~~~~
  util/annotate.c:1490:50: note: format string is defined here
      " -l -d %s %s -C \"%s\" 2>/dev/null|grep -v \"%s:\"|expand",
                                                  ^~
  In file included from /usr/include/stdio.h:861,
                   from util/color.h:5,
                   from util/sort.h:8,
                   from util/annotate.c:14:
  /usr/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 116 or more bytes (assuming 8331) into a destination of size 8192
     return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
          __bos (__s), __fmt, __va_arg_pack ());
          ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

So switch to asprintf, that will make sure enough space is available.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qagoy2dmbjpc9gdnaj0r3mml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/annotate.c |   14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -1077,7 +1077,7 @@ int symbol__annotate(struct symbol *sym,
 	struct dso *dso = map->dso;
 	char *filename = dso__build_id_filename(dso, NULL, 0);
 	bool free_filename = true;
-	char command[PATH_MAX * 2];
+	char *command;
 	FILE *file;
 	int err = 0;
 	char symfs_filename[PATH_MAX];
@@ -1192,7 +1192,7 @@ fallback:
 		strcpy(symfs_filename, tmp);
 	}
 
-	snprintf(command, sizeof(command),
+	err = asprintf(&command,
 		 "%s %s%s --start-address=0x%016" PRIx64
 		 " --stop-address=0x%016" PRIx64
 		 " -l -d %s %s -C %s 2>/dev/null|grep -v %s|expand",
@@ -1205,6 +1205,11 @@ fallback:
 		 symbol_conf.annotate_src ? "-S" : "",
 		 symfs_filename, filename);
 
+	if (err < 0) {
+		pr_err("Failure allocating memory for the command to run\n");
+		goto out_remove_tmp;
+	}
+
 	pr_debug("Executing: %s\n", command);
 
 	file = popen(command, "r");
@@ -1214,7 +1219,7 @@ fallback:
 		 * If we were using debug info should retry with
 		 * original binary.
 		 */
-		goto out_remove_tmp;
+		goto out_free_command;
 	}
 
 	nline = 0;
@@ -1237,6 +1242,9 @@ fallback:
 
 	pclose(file);
 
+out_free_command:
+	free(command);
+
 out_remove_tmp:
 	if (dso__needs_decompress(dso))
 		unlink(symfs_filename);

[PATCH 4.4 54/54] perf probe: Fix to check blacklist address correctly

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 80526491c2ca6abc028c0f0dbb0707a1f35fb18a upstream.

Fix to check kprobe blacklist address correctly with relocated address
by adjusting debuginfo address.

Since the address in the debuginfo is same as objdump, it is different
from relocated kernel address with KASLR.  Thus, 'perf probe' always
misses to catch the blacklisted addresses.

Without this patch, 'perf probe' can not detect the blacklist addresses
on a KASLR enabled kernel.

  # perf probe kprobe_dispatcher
  Failed to write event: Invalid argument
    Error: Failed to add events.
  #

With this patch, it correctly shows the error message.

  # perf probe kprobe_dispatcher
  kprobe_dispatcher is blacklisted function, skip it.
  Probe point 'kprobe_dispatcher' not found.
    Error: Failed to add events.
  #

Fixes: 9aaf5a5f479b ("perf probe: Check kprobes blacklist when adding new events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/158763966411.30755.5882376357738273695.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/probe-event.c |   21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -122,7 +122,7 @@ static struct symbol *__find_kernel_func
 	return machine__find_kernel_function(host_machine, addr, mapp, NULL);
 }
 
-static struct ref_reloc_sym *kernel_get_ref_reloc_sym(void)
+static struct ref_reloc_sym *kernel_get_ref_reloc_sym(struct map **pmap)
 {
 	/* kmap->ref_reloc_sym should be set if host_machine is initialized */
 	struct kmap *kmap;
@@ -134,6 +134,10 @@ static struct ref_reloc_sym *kernel_get_
 	kmap = map__kmap(map);
 	if (!kmap)
 		return NULL;
+
+	if (pmap)
+		*pmap = map;
+
 	return kmap->ref_reloc_sym;
 }
 
@@ -145,7 +149,7 @@ static int kernel_get_symbol_address_by_
 	struct map *map;
 
 	/* ref_reloc_sym is just a label. Need a special fix*/
-	reloc_sym = kernel_get_ref_reloc_sym();
+	reloc_sym = kernel_get_ref_reloc_sym(NULL);
 	if (reloc_sym && strcmp(name, reloc_sym->name) == 0)
 		*addr = (reloc) ? reloc_sym->addr : reloc_sym->unrelocated_addr;
 	else {
@@ -618,6 +622,7 @@ static int post_process_probe_trace_even
 					   bool uprobe)
 {
 	struct ref_reloc_sym *reloc_sym;
+	struct map *map;
 	char *tmp;
 	int i, skipped = 0;
 
@@ -628,7 +633,7 @@ static int post_process_probe_trace_even
 	if (module)
 		return add_module_to_probe_trace_events(tevs, ntevs, module);
 
-	reloc_sym = kernel_get_ref_reloc_sym();
+	reloc_sym = kernel_get_ref_reloc_sym(&map);
 	if (!reloc_sym) {
 		pr_warning("Relocated base symbol is not found!\n");
 		return -EINVAL;
@@ -637,9 +642,13 @@ static int post_process_probe_trace_even
 	for (i = 0; i < ntevs; i++) {
 		if (!tevs[i].point.address || tevs[i].point.retprobe)
 			continue;
-		/* If we found a wrong one, mark it by NULL symbol */
+		/*
+		 * If we found a wrong one, mark it by NULL symbol.
+		 * Since addresses in debuginfo is same as objdump, we need
+		 * to convert it to addresses on memory.
+		 */
 		if (kprobe_warn_out_range(tevs[i].point.symbol,
-					  tevs[i].point.address)) {
+			map__objdump_2mem(map, tevs[i].point.address))) {
 			tmp = NULL;
 			skipped++;
 		} else {
@@ -2553,7 +2562,7 @@ static int find_probe_trace_events_from_
 
 	/* Note that the symbols in the kmodule are not relocated */
 	if (!pev->uprobes && !pp->retprobe && !pev->target) {
-		reloc_sym = kernel_get_ref_reloc_sym();
+		reloc_sym = kernel_get_ref_reloc_sym(NULL);
 		if (!reloc_sym) {
 			pr_warning("Relocated base symbol is not found!\n");
 			ret = -EINVAL;

Re: [PATCH 4.4 00/54] 4.4.232-rc1 review

[Guenter Roeck]

On Thu, Jul 30, 2020 at 10:04:39AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.232 release.
> There are 54 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 169 pass: 169 fail: 0
Qemu test results:
	total: 331 pass: 331 fail: 0

Guenter

Re: [PATCH 4.4 00/54] 4.4.232-rc1 review

[Jon Hunter]

On Thu, 30 Jul 2020 10:04:39 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.232 release.
> There are 54 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.232-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.4:
    6 builds:	6 pass, 0 fail
    12 boots:	12 pass, 0 fail
    25 tests:	25 pass, 0 fail

Linux version:	4.4.232-rc1-g0ee6ef294be6
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra30-cardhu-a04

Jon

Re: [PATCH 4.4 00/54] 4.4.232-rc1 review

[Naresh Kamboju]

On Thu, 30 Jul 2020 at 13:43, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.4.232 release.
> There are 54 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat, 01 Aug 2020 07:44:05 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.232-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.4.232-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: 0ee6ef294be6266800b03470220722c82b6ceb47
git describe: v4.4.231-55-g0ee6ef294be6
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.231-55-g0ee6ef294be6

No regressions (compared to build v4.4.231)

No fixes (compared to build v4.4.231)

Ran 18356 total tests in the following environments and test suites.

Environments
--------------
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* v4l2-compliance
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest/net
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* ssuite

Summary
------------------------------------------------------------------------

kernel: 4.4.232-rc1
git repo: https://git.linaro.org/lkft/arm64-stable-rc.git
git branch: 4.4.232-rc1-hikey-20200730-776
git commit: 2d0c7614039564b9d27d100caf1acb1eb33c1c9d
git describe: 4.4.232-rc1-hikey-20200730-776
Test details: https://qa-reports.linaro.org/lkft/linaro-hikey-stable-rc-4.4-oe/build/4.4.232-rc1-hikey-20200730-776

No regressions (compared to build 4.4.232-rc1-hikey-20200727-775)

No fixes (compared to build 4.4.232-rc1-hikey-20200727-775)

Ran 1841 total tests in the following environments and test suites.

Environments
--------------
- hi6220-hikey - arm64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance

-- 
Linaro LKFT
https://lkft.linaro.org