Stable Archive on lore.kernel.org
 help / color / Atom feed
From: Mike Kravetz <mike.kravetz@oracle.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Michal Nazarewicz <mina86@mina86.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Barry Song <song.bao.hua@hisilicon.com>,
	Roman Gushchin <guro@fb.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Mike Kravetz <mike.kravetz@oracle.com>,
	stable@vger.kernel.org
Subject: [PATCH] cma: don't quit at first error when activating reserved areas
Date: Thu, 30 Jul 2020 09:31:23 -0700
Message-ID: <20200730163123.6451-1-mike.kravetz@oracle.com> (raw)

The routine cma_init_reserved_areas is designed to activate all
reserved cma areas.  It quits when it first encounters an error.
This can leave some areas in a state where they are reserved but
not activated.  There is no feedback to code which performed the
reservation.  Attempting to allocate memory from areas in such a
state will result in a BUG.

Modify cma_init_reserved_areas to always attempt to activate all
areas.  The called routine, cma_activate_area is responsible for
leaving the area in a valid state.  No one is making active use
of returned error codes, so change the routine to void.

How to reproduce:  This example uses kernelcore, hugetlb and cma
as an easy way to reproduce.  However, this is a more general cma
issue.

Two node x86 VM 16GB total, 8GB per node
Kernel command line parameters, kernelcore=4G hugetlb_cma=8G
Related boot time messages,
  hugetlb_cma: reserve 8192 MiB, up to 4096 MiB per node
  cma: Reserved 4096 MiB at 0x0000000100000000
  hugetlb_cma: reserved 4096 MiB on node 0
  cma: Reserved 4096 MiB at 0x0000000300000000
  hugetlb_cma: reserved 4096 MiB on node 1
  cma: CMA area hugetlb could not be activated

 # echo 8 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  ...
  Call Trace:
    bitmap_find_next_zero_area_off+0x51/0x90
    cma_alloc+0x1a5/0x310
    alloc_fresh_huge_page+0x78/0x1a0
    alloc_pool_huge_page+0x6f/0xf0
    set_max_huge_pages+0x10c/0x250
    nr_hugepages_store_common+0x92/0x120
    ? __kmalloc+0x171/0x270
    kernfs_fop_write+0xc1/0x1a0
    vfs_write+0xc7/0x1f0
    ksys_write+0x5f/0xe0
    do_syscall_64+0x4d/0x90
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c64be2bb1c6e ("drivers: add Contiguous Memory Allocator")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
---
 mm/cma.c | 23 +++++++++--------------
 1 file changed, 9 insertions(+), 14 deletions(-)

diff --git a/mm/cma.c b/mm/cma.c
index 26ecff818881..0963c0f9c502 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -93,17 +93,15 @@ static void cma_clear_bitmap(struct cma *cma, unsigned long pfn,
 	mutex_unlock(&cma->lock);
 }
 
-static int __init cma_activate_area(struct cma *cma)
+static void __init cma_activate_area(struct cma *cma)
 {
 	unsigned long base_pfn = cma->base_pfn, pfn = base_pfn;
 	unsigned i = cma->count >> pageblock_order;
 	struct zone *zone;
 
 	cma->bitmap = bitmap_zalloc(cma_bitmap_maxno(cma), GFP_KERNEL);
-	if (!cma->bitmap) {
-		cma->count = 0;
-		return -ENOMEM;
-	}
+	if (!cma->bitmap)
+		goto out_error;
 
 	WARN_ON_ONCE(!pfn_valid(pfn));
 	zone = page_zone(pfn_to_page(pfn));
@@ -133,25 +131,22 @@ static int __init cma_activate_area(struct cma *cma)
 	spin_lock_init(&cma->mem_head_lock);
 #endif
 
-	return 0;
+	return;
 
 not_in_zone:
-	pr_err("CMA area %s could not be activated\n", cma->name);
 	bitmap_free(cma->bitmap);
+out_error:
 	cma->count = 0;
-	return -EINVAL;
+	pr_err("CMA area %s could not be activated\n", cma->name);
+	return;
 }
 
 static int __init cma_init_reserved_areas(void)
 {
 	int i;
 
-	for (i = 0; i < cma_area_count; i++) {
-		int ret = cma_activate_area(&cma_areas[i]);
-
-		if (ret)
-			return ret;
-	}
+	for (i = 0; i < cma_area_count; i++)
+		cma_activate_area(&cma_areas[i]);
 
 	return 0;
 }
-- 
2.25.4


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30 16:31 Mike Kravetz [this message]
2020-07-30 19:16 ` Roman Gushchin
2020-07-31  0:51 ` Song Bao Hua (Barry Song)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200730163123.6451-1-mike.kravetz@oracle.com \
    --to=mike.kravetz@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=guro@fb.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mina86@mina86.com \
    --cc=song.bao.hua@hisilicon.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Stable Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://lore.kernel.org/stable \
		stable@vger.kernel.org
	public-inbox-index stable

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git