From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Takashi Iwai <tiwai@suse.de>,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH 4.9 09/42] ALSA: hda/hdmi: Use single mutex unlock in error paths
Date: Tue, 1 Dec 2020 09:53:07 +0100 [thread overview]
Message-ID: <20201201084642.627849756@linuxfoundation.org> (raw)
In-Reply-To: <20201201084642.194933793@linuxfoundation.org>
From: Takashi Iwai <tiwai@suse.de>
commit f69548ffafcc4942022f16f2f192b24143de1dba upstream
Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach. This will
simplify the code and make easier to find the unbalanced mutex locks.
No functional changes, but only the code readability improvement as a
preliminary work for further changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_hdmi.c | 67 ++++++++++++++++++++++-----------------------
1 file changed, 33 insertions(+), 34 deletions(-)
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -307,13 +307,13 @@ static int hdmi_eld_ctl_info(struct snd_
if (!per_pin) {
/* no pin is bound to the pcm */
uinfo->count = 0;
- mutex_unlock(&spec->pcm_lock);
- return 0;
+ goto unlock;
}
eld = &per_pin->sink_eld;
uinfo->count = eld->eld_valid ? eld->eld_size : 0;
- mutex_unlock(&spec->pcm_lock);
+ unlock:
+ mutex_unlock(&spec->pcm_lock);
return 0;
}
@@ -325,6 +325,7 @@ static int hdmi_eld_ctl_get(struct snd_k
struct hdmi_spec_per_pin *per_pin;
struct hdmi_eld *eld;
int pcm_idx;
+ int err = 0;
pcm_idx = kcontrol->private_value;
mutex_lock(&spec->pcm_lock);
@@ -333,16 +334,15 @@ static int hdmi_eld_ctl_get(struct snd_k
/* no pin is bound to the pcm */
memset(ucontrol->value.bytes.data, 0,
ARRAY_SIZE(ucontrol->value.bytes.data));
- mutex_unlock(&spec->pcm_lock);
- return 0;
+ goto unlock;
}
- eld = &per_pin->sink_eld;
+ eld = &per_pin->sink_eld;
if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data) ||
eld->eld_size > ELD_MAX_SIZE) {
- mutex_unlock(&spec->pcm_lock);
snd_BUG();
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
memset(ucontrol->value.bytes.data, 0,
@@ -350,9 +350,10 @@ static int hdmi_eld_ctl_get(struct snd_k
if (eld->eld_valid)
memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
eld->eld_size);
- mutex_unlock(&spec->pcm_lock);
- return 0;
+ unlock:
+ mutex_unlock(&spec->pcm_lock);
+ return err;
}
static struct snd_kcontrol_new eld_bytes_ctl = {
@@ -1114,8 +1115,8 @@ static int hdmi_pcm_open(struct hda_pcm_
pin_idx = hinfo_to_pin_index(codec, hinfo);
if (!spec->dyn_pcm_assign) {
if (snd_BUG_ON(pin_idx < 0)) {
- mutex_unlock(&spec->pcm_lock);
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
} else {
/* no pin is assigned to the PCM
@@ -1123,16 +1124,13 @@ static int hdmi_pcm_open(struct hda_pcm_
*/
if (pin_idx < 0) {
err = hdmi_pcm_open_no_pin(hinfo, codec, substream);
- mutex_unlock(&spec->pcm_lock);
- return err;
+ goto unlock;
}
}
err = hdmi_choose_cvt(codec, pin_idx, &cvt_idx);
- if (err < 0) {
- mutex_unlock(&spec->pcm_lock);
- return err;
- }
+ if (err < 0)
+ goto unlock;
per_cvt = get_cvt(spec, cvt_idx);
/* Claim converter */
@@ -1168,12 +1166,11 @@ static int hdmi_pcm_open(struct hda_pcm_
per_cvt->assigned = 0;
hinfo->nid = 0;
snd_hda_spdif_ctls_unassign(codec, pcm_idx);
- mutex_unlock(&spec->pcm_lock);
- return -ENODEV;
+ err = -ENODEV;
+ goto unlock;
}
}
- mutex_unlock(&spec->pcm_lock);
/* Store the updated parameters */
runtime->hw.channels_min = hinfo->channels_min;
runtime->hw.channels_max = hinfo->channels_max;
@@ -1182,7 +1179,9 @@ static int hdmi_pcm_open(struct hda_pcm_
snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
- return 0;
+ unlock:
+ mutex_unlock(&spec->pcm_lock);
+ return err;
}
/*
@@ -1726,7 +1725,7 @@ static int generic_hdmi_playback_pcm_pre
struct snd_pcm_runtime *runtime = substream->runtime;
bool non_pcm;
int pinctl;
- int err;
+ int err = 0;
mutex_lock(&spec->pcm_lock);
pin_idx = hinfo_to_pin_index(codec, hinfo);
@@ -1738,13 +1737,12 @@ static int generic_hdmi_playback_pcm_pre
pin_cvt_fixup(codec, NULL, cvt_nid);
snd_hda_codec_setup_stream(codec, cvt_nid,
stream_tag, 0, format);
- mutex_unlock(&spec->pcm_lock);
- return 0;
+ goto unlock;
}
if (snd_BUG_ON(pin_idx < 0)) {
- mutex_unlock(&spec->pcm_lock);
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
per_pin = get_pin(spec, pin_idx);
pin_nid = per_pin->pin_nid;
@@ -1781,6 +1779,7 @@ static int generic_hdmi_playback_pcm_pre
err = spec->ops.setup_stream(codec, cvt_nid, pin_nid,
stream_tag, format);
+ unlock:
mutex_unlock(&spec->pcm_lock);
return err;
}
@@ -1802,6 +1801,7 @@ static int hdmi_pcm_close(struct hda_pcm
struct hdmi_spec_per_cvt *per_cvt;
struct hdmi_spec_per_pin *per_pin;
int pinctl;
+ int err = 0;
if (hinfo->nid) {
pcm_idx = hinfo_to_pcm_index(codec, hinfo);
@@ -1820,14 +1820,12 @@ static int hdmi_pcm_close(struct hda_pcm
snd_hda_spdif_ctls_unassign(codec, pcm_idx);
clear_bit(pcm_idx, &spec->pcm_in_use);
pin_idx = hinfo_to_pin_index(codec, hinfo);
- if (spec->dyn_pcm_assign && pin_idx < 0) {
- mutex_unlock(&spec->pcm_lock);
- return 0;
- }
+ if (spec->dyn_pcm_assign && pin_idx < 0)
+ goto unlock;
if (snd_BUG_ON(pin_idx < 0)) {
- mutex_unlock(&spec->pcm_lock);
- return -EINVAL;
+ err = -EINVAL;
+ goto unlock;
}
per_pin = get_pin(spec, pin_idx);
@@ -1846,10 +1844,11 @@ static int hdmi_pcm_close(struct hda_pcm
per_pin->setup = false;
per_pin->channels = 0;
mutex_unlock(&per_pin->lock);
+ unlock:
mutex_unlock(&spec->pcm_lock);
}
- return 0;
+ return err;
}
static const struct hda_pcm_ops generic_ops = {
next prev parent reply other threads:[~2020-12-01 8:56 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-01 8:52 [PATCH 4.9 00/42] 4.9.247-rc1 review Greg Kroah-Hartman
2020-12-01 8:52 ` [PATCH 4.9 01/42] perf event: Check ref_reloc_sym before using it Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 02/42] mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault() Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 03/42] btrfs: fix lockdep splat when reading qgroup config on mount Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 04/42] PCI: Add device even if driver attach failed Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 05/42] btrfs: tree-checker: Enhance chunk checker to validate chunk profile Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 06/42] btrfs: inode: Verify inode mode to avoid NULL pointer dereference Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 07/42] KVM: x86: Fix split-irqchip vs interrupt injection window request Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 08/42] arm64: pgtable: Fix pte_accessible() Greg Kroah-Hartman
2020-12-01 8:53 ` Greg Kroah-Hartman [this message]
2020-12-01 8:53 ` [PATCH 4.9 10/42] ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 11/42] HID: cypress: Support Varmilo Keyboards media hotkeys Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 12/42] Input: i8042 - allow insmod to succeed on devices without an i8042 controller Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 13/42] HID: hid-sensor-hub: Fix issue with devices with no report ID Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 14/42] dmaengine: xilinx_dma: use readl_poll_timeout_atomic variant Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 15/42] x86/xen: dont unbind uninitialized lock_kicker_irq Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 16/42] proc: dont allow async path resolution of /proc/self components Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 17/42] dmaengine: pl330: _prep_dma_memcpy: Fix wrong burst size Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 18/42] scsi: libiscsi: Fix NOP race condition Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 19/42] scsi: target: iscsi: Fix cmd abort fabric stop race Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 20/42] perf/x86: fix sysfs type mismatches Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 21/42] phy: tegra: xusb: Fix dangling pointer on probe failure Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 22/42] batman-adv: set .owner to THIS_MODULE Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 23/42] scsi: ufs: Fix race between shutdown and runtime resume flow Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 24/42] bnxt_en: fix error return code in bnxt_init_board() Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 25/42] video: hyperv_fb: Fix the cache type when mapping the VRAM Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 26/42] bnxt_en: Release PCI regions when DMA mask setup fails during probe Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 27/42] IB/mthca: fix return value of error branch in mthca_init_cq() Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 28/42] nfc: s3fwrn5: use signed integer for parsing GPIO numbers Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 29/42] net: ena: set initial DMA width to avoid intel iommu issue Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 30/42] ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 31/42] efivarfs: revert "fix memory leak in efivarfs_create()" Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 32/42] can: gs_usb: fix endianess problem with candleLight firmware Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 33/42] platform/x86: toshiba_acpi: Fix the wrong variable assignment Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 34/42] perf probe: Fix to die_entrypc() returns error correctly Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 35/42] USB: core: Change %pK for __user pointers to %px Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 36/42] usb: gadget: f_midi: Fix memleak in f_midi_alloc Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 37/42] usb: gadget: Fix memleak in gadgetfs_fill_super Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 38/42] x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 39/42] regulator: avoid resolve_supply() infinite recursion Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 40/42] regulator: workaround self-referent regulators Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 41/42] USB: core: add endpoint-blacklist quirk Greg Kroah-Hartman
2020-12-01 8:53 ` [PATCH 4.9 42/42] USB: core: Fix regression in Hercules audio card Greg Kroah-Hartman
2020-12-01 13:39 ` [PATCH 4.9 00/42] 4.9.247-rc1 review Jon Hunter
2020-12-01 21:39 ` Guenter Roeck
2020-12-02 6:14 ` Naresh Kamboju
2020-12-02 17:04 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201201084642.627849756@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sudipm.mukherjee@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).