From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Christoph Schemmel <christoph.schemmel@gmail.com>,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 4.19 03/38] USB: serial: option: Adding support for Cinterion MV31
Date: Mon, 8 Feb 2021 16:00:50 +0100 [thread overview]
Message-ID: <20210208145806.277869716@linuxfoundation.org> (raw)
In-Reply-To: <20210208145806.141056364@linuxfoundation.org>
From: Christoph Schemmel <christoph.schemmel@gmail.com>
commit e478d6029dca9d8462f426aee0d32896ef64f10f upstream.
Adding support for Cinterion device MV31 for enumeration with
PID 0x00B3 and 0x00B7.
usb-devices output for 0x00B3
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00b3 Rev=04.14
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00B3 USB Mobile Broadband
S: SerialNumber=b3246eed
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=cdc_wdm
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
usb-devices output for 0x00B7
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=1e2d ProdID=00b7 Rev=04.14
S: Manufacturer=Cinterion
S: Product=Cinterion PID 0x00B3 USB Mobile Broadband
S: SerialNumber=b3246eed
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/option.c | 6 ++++++
1 file changed, 6 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -425,6 +425,8 @@ static void option_instat_callback(struc
#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084
#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085
#define CINTERION_PRODUCT_CLS8 0x00b0
+#define CINTERION_PRODUCT_MV31_MBIM 0x00b3
+#define CINTERION_PRODUCT_MV31_RMNET 0x00b7
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1914,6 +1916,10 @@ static const struct usb_device_id option
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_MBIM, 0xff),
+ .driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
+ .driver_info = RSVD(0)},
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
.driver_info = RSVD(4) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
next prev parent reply other threads:[~2021-02-08 15:18 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 15:00 [PATCH 4.19 00/38] 4.19.175-rc1 review Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 01/38] USB: serial: cp210x: add pid/vid for WSDA-200-USB Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 02/38] USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000 Greg Kroah-Hartman
2021-02-08 15:00 ` Greg Kroah-Hartman [this message]
2021-02-08 15:00 ` [PATCH 4.19 04/38] elfcore: fix building with clang Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 05/38] Input: i8042 - unbreak Pegatron C15B Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 06/38] rxrpc: Fix deadlock around release of dst cached on udp tunnel Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 07/38] arm64: dts: ls1046a: fix dcfg address range Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 08/38] net: lapb: Copy the skb before sending a packet Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 09/38] net: mvpp2: TCAM entry enable should be written after SRAM data Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 10/38] memblock: do not start bottom-up allocations with kernel_end Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 11/38] USB: gadget: legacy: fix an error code in eth_bind() Greg Kroah-Hartman
2021-02-08 15:00 ` [PATCH 4.19 12/38] USB: usblp: dont call usb_set_interface if theres a single alt Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 13/38] usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop() Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 14/38] usb: dwc2: Fix endpoint direction check in ep_from_windex Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 15/38] usb: dwc3: fix clock issue during resume in OTG mode Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 16/38] ovl: fix dentry leak in ovl_get_redirect Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 17/38] mac80211: fix station rate table updates on assoc Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 18/38] kretprobe: Avoid re-registration of the same kretprobe earlier Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 19/38] genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 20/38] xhci: fix bounce buffer usage for non-sg list case Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 21/38] cifs: report error instead of invalid when revalidating a dentry fails Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 22/38] smb3: Fix out-of-bounds bug in SMB2_negotiate() Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 23/38] mmc: core: Limit retries when analyse of SDIO tuples fails Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 24/38] nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 25/38] KVM: SVM: Treat SVM as unsupported when running as an SEV guest Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 26/38] ARM: footbridge: fix dc21285 PCI configuration accessors Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 27/38] mm: hugetlbfs: fix cannot migrate the fallocated HugeTLB page Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 28/38] mm: hugetlb: fix a race between freeing and dissolving the page Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 29/38] mm: hugetlb: fix a race between isolating and freeing page Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 30/38] mm: hugetlb: remove VM_BUG_ON_PAGE from page_huge_active Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 31/38] mm: thp: fix MADV_REMOVE deadlock on shmem THP Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 32/38] x86/build: Disable CET instrumentation in the kernel Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 33/38] x86/apic: Add extra serialization for non-serializing MSRs Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 34/38] Input: xpad - sync supported devices with fork on GitHub Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 35/38] iommu/vt-d: Do not use flush-queue when caching-mode is on Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 36/38] md: Set prev_flush_start and flush_bio in an atomic way Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 37/38] net: ip_tunnel: fix mtu calculation Greg Kroah-Hartman
2021-02-08 15:01 ` [PATCH 4.19 38/38] net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add Greg Kroah-Hartman
2021-02-08 18:34 ` [PATCH 4.19 00/38] 4.19.175-rc1 review Pavel Machek
2021-02-08 20:42 ` Shuah Khan
2021-02-09 15:02 ` Naresh Kamboju
2021-02-09 18:11 ` Guenter Roeck
2021-02-10 1:16 ` Ross Schmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210208145806.277869716@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=christoph.schemmel@gmail.com \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).