[PATCH AUTOSEL 4.19 01/21] i2c: rcar: optimize cacheline to minimize HW race condition

[PATCH AUTOSEL 4.19 01/21] i2c: rcar: optimize cacheline to minimize HW race condition

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 25c2e0fb5fefb8d7847214cf114d94c7aad8e9ce ]

'flags' and 'io' are needed first, so they should be at the beginning of
the private struct.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-rcar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index f9029800d399..3ea2ceec676c 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -117,6 +117,7 @@ enum rcar_i2c_type {
 };
 
 struct rcar_i2c_priv {
+	u32 flags;
 	void __iomem *io;
 	struct i2c_adapter adap;
 	struct i2c_msg *msg;
@@ -127,7 +128,6 @@ struct rcar_i2c_priv {
 
 	int pos;
 	u32 icccr;
-	u32 flags;
 	u8 recovery_icmcr;	/* protected by adapter lock */
 	enum rcar_i2c_type devtype;
 	struct i2c_client *slave;
-- 
2.30.1

[PATCH AUTOSEL 4.19 02/21] udf: fix silent AED tagLocation corruption

[Sasha Levin]

From: "Steven J. Magnani" <magnani@ieee.org>

[ Upstream commit 63c9e47a1642fc817654a1bc18a6ec4bbcc0f056 ]

When extending a file, udf_do_extend_file() may enter following empty
indirect extent. At the end of udf_do_extend_file() we revert prev_epos
to point to the last written extent. However if we end up not adding any
further extent in udf_do_extend_file(), the reverting points prev_epos
into the header area of the AED and following updates of the extents
(in udf_update_extents()) will corrupt the header.

Make sure that we do not follow indirect extent if we are not going to
add any more extents so that returning back to the last written extent
works correctly.

Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org
Signed-off-by: Steven J. Magnani <magnani@ieee.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/inode.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index 3bf89a633836..f5500d2a3879 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -540,11 +540,14 @@ static int udf_do_extend_file(struct inode *inode,
 
 		udf_write_aext(inode, last_pos, &last_ext->extLocation,
 				last_ext->extLength, 1);
+
 		/*
-		 * We've rewritten the last extent but there may be empty
-		 * indirect extent after it - enter it.
+		 * We've rewritten the last extent. If we are going to add
+		 * more extents, we may need to enter possible following
+		 * empty indirect extent.
 		 */
-		udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
+		if (new_block_bytes || prealloc_len)
+			udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
 	}
 
 	/* Managed to do everything necessary? */
-- 
2.30.1

[PATCH AUTOSEL 4.19 03/21] mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 0bb7e560f821c7770973a94e346654c4bdccd42c ]

If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()'
call.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mxs-mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index add1e70195ea..7125687faf76 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -659,7 +659,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	ret = mmc_of_parse(mmc);
 	if (ret)
-		goto out_clk_disable;
+		goto out_free_dma;
 
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-- 
2.30.1

[PATCH AUTOSEL 4.19 04/21] mmc: sdhci-of-dwcmshc: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN

[Sasha Levin]

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit 5f7dfda4f2cec580c135fd81d96a05006651c128 ]

The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so
set the quirk.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/sdhci-of-dwcmshc.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index 1b7cd144fb01..a34b17b284a5 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -28,6 +28,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
 static const struct sdhci_pltfm_data sdhci_dwcmshc_pdata = {
 	.ops = &sdhci_dwcmshc_ops,
 	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 };
 
 static int dwcmshc_probe(struct platform_device *pdev)
-- 
2.30.1

[PATCH AUTOSEL 4.19 05/21] mmc: mediatek: fix race condition between msdc_request_timeout and irq

[Sasha Levin]

From: Chaotian Jing <chaotian.jing@mediatek.com>

[ Upstream commit 0354ca6edd464a2cf332f390581977b8699ed081 ]

when get request SW timeout, if CMD/DAT xfer done irq coming right now,
then there is race between the msdc_request_timeout work and irq handler,
and the host->cmd and host->data may set to NULL in irq handler. also,
current flow ensure that only one path can go to msdc_request_done(), so
no need check the return value of cancel_delayed_work().

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Link: https://lore.kernel.org/r/20201218071611.12276-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mtk-sd.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 9ecf86ba4bb0..967e47770af6 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -928,13 +928,13 @@ static void msdc_track_cmd_data(struct msdc_host *host,
 static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
 {
 	unsigned long flags;
-	bool ret;
 
-	ret = cancel_delayed_work(&host->req_timeout);
-	if (!ret) {
-		/* delay work already running */
-		return;
-	}
+	/*
+	 * No need check the return value of cancel_delayed_work, as only ONE
+	 * path will go here!
+	 */
+	cancel_delayed_work(&host->req_timeout);
+
 	spin_lock_irqsave(&host->lock, flags);
 	host->mrq = NULL;
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -952,7 +952,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 	bool done = false;
 	bool sbc_error;
 	unsigned long flags;
-	u32 *rsp = cmd->resp;
+	u32 *rsp;
 
 	if (mrq->sbc && cmd == mrq->cmd &&
 	    (events & (MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR
@@ -973,6 +973,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 
 	if (done)
 		return true;
+	rsp = cmd->resp;
 
 	sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask);
 
@@ -1154,7 +1155,7 @@ static void msdc_data_xfer_next(struct msdc_host *host,
 static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 				struct mmc_request *mrq, struct mmc_data *data)
 {
-	struct mmc_command *stop = data->stop;
+	struct mmc_command *stop;
 	unsigned long flags;
 	bool done;
 	unsigned int check_data = events &
@@ -1170,6 +1171,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 
 	if (done)
 		return true;
+	stop = data->stop;
 
 	if (check_data || (stop && stop->error)) {
 		dev_dbg(host->dev, "DMA status: 0x%8X\n",
-- 
2.30.1

[PATCH AUTOSEL 4.19 06/21] powerpc/pci: Add ppc_md.discover_phbs()

[Sasha Levin]

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit 5537fcb319d016ce387f818dd774179bc03217f5 ]

On many powerpc platforms the discovery and initalisation of
pci_controllers (PHBs) happens inside of setup_arch(). This is very early
in boot (pre-initcalls) and means that we're initialising the PHB long
before many basic kernel services (slab allocator, debugfs, a real ioremap)
are available.

On PowerNV this causes an additional problem since we map the PHB registers
with ioremap(). As of commit d538aadc2718 ("powerpc/ioremap: warn on early
use of ioremap()") a warning is printed because we're using the "incorrect"
API to setup and MMIO mapping in searly boot. The kernel does provide
early_ioremap(), but that is not intended to create long-lived MMIO
mappings and a seperate warning is printed by generic code if
early_ioremap() mappings are "leaked."

This is all fixable with dumb hacks like using early_ioremap() to setup
the initial mapping then replacing it with a real ioremap later on in
boot, but it does raise the question: Why the hell are we setting up the
PHB's this early in boot?

The old and wise claim it's due to "hysterical rasins." Aside from amused
grapes there doesn't appear to be any real reason to maintain the current
behaviour. Already most of the newer embedded platforms perform PHB
discovery in an arch_initcall and between the end of setup_arch() and the
start of initcalls none of the generic kernel code does anything PCI
related. On powerpc scanning PHBs occurs in a subsys_initcall so it should
be possible to move the PHB discovery to a core, postcore or arch initcall.

This patch adds the ppc_md.discover_phbs hook and a core_initcall stub that
calls it. The core_initcalls are the earliest to be called so this will
any possibly issues with dependency between initcalls. This isn't just an
academic issue either since on pseries and PowerNV EEH init occurs in an
arch_initcall and depends on the pci_controllers being available, similarly
the creation of pci_dns occurs at core_initcall_sync (i.e. between core and
postcore initcalls). These problems need to be addressed seperately.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Make discover_phbs() static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103043523.916109-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/machdep.h |  3 +++
 arch/powerpc/kernel/pci-common.c   | 10 ++++++++++
 2 files changed, 13 insertions(+)

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index a47de82fb8e2..bda87cbf106d 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -71,6 +71,9 @@ struct machdep_calls {
 	int		(*pcibios_root_bridge_prepare)(struct pci_host_bridge
 				*bridge);
 
+	/* finds all the pci_controllers present at boot */
+	void 		(*discover_phbs)(void);
+
 	/* To setup PHBs when using automatic OF platform driver for PCI */
 	int		(*pci_setup_phb)(struct pci_controller *host);
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 88e4f69a09e5..74628aca2bf1 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1671,3 +1671,13 @@ static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MOTOROLA, PCI_ANY_ID, fixup_hide_host_resource_fsl);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, fixup_hide_host_resource_fsl);
+
+
+static int __init discover_phbs(void)
+{
+	if (ppc_md.discover_phbs)
+		ppc_md.discover_phbs();
+
+	return 0;
+}
+core_initcall(discover_phbs);
-- 
2.30.1

[PATCH AUTOSEL 4.19 07/21] powerpc: improve handling of unrecoverable system reset

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 11cb0a25f71818ca7ab4856548ecfd83c169aa4d ]

If an unrecoverable system reset hits in process context, the system
does not have to panic. Similar to machine check, call nmi_exit()
before die().

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-26-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/traps.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 1b2d84cb373b..2379c4bf3979 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -433,8 +433,11 @@ out:
 		die("Unrecoverable nested System Reset", regs, SIGABRT);
 #endif
 	/* Must die if the interrupt is not recoverable */
-	if (!(regs->msr & MSR_RI))
+	if (!(regs->msr & MSR_RI)) {
+		/* For the reason explained in die_mce, nmi_exit before die */
+		nmi_exit();
 		die("Unrecoverable System Reset", regs, SIGABRT);
+	}
 
 	if (!nested)
 		nmi_exit();
-- 
2.30.1

[PATCH AUTOSEL 4.19 08/21] powerpc/perf: Record counter overflow always if SAMPLE_IP is unset

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit d137845c973147a22622cc76c7b0bc16f6206323 ]

While sampling for marked events, currently we record the sample only
if the SIAR valid bit of Sampled Instruction Event Register (SIER) is
set. SIAR_VALID bit is used for fetching the instruction address from
Sampled Instruction Address Register(SIAR). But there are some
usecases, where the user is interested only in the PMU stats at each
counter overflow and the exact IP of the overflow event is not
required. Dropping SIAR invalid samples will fail to record some of
the counter overflows in such cases.

Example of such usecase is dumping the PMU stats (event counts) after
some regular amount of instructions/events from the userspace (ex: via
ptrace). Here counter overflow is indicated to userspace via signal
handler, and captured by monitoring and enabling I/O signaling on the
event file descriptor. In these cases, we expect to get
sample/overflow indication after each specified sample_period.

Perf event attribute will not have PERF_SAMPLE_IP set in the
sample_type if exact IP of the overflow event is not requested. So
while profiling if SAMPLE_IP is not set, just record the counter
overflow irrespective of SIAR_VALID check.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Reflow comment and if formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612516492-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 70de13822828..091bdeaf02a3 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2046,7 +2046,17 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			left += period;
 			if (left <= 0)
 				left = period;
-			record = siar_valid(regs);
+
+			/*
+			 * If address is not requested in the sample via
+			 * PERF_SAMPLE_IP, just record that sample irrespective
+			 * of SIAR valid check.
+			 */
+			if (event->attr.sample_type & PERF_SAMPLE_IP)
+				record = siar_valid(regs);
+			else
+				record = 1;
+
 			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)
@@ -2064,9 +2074,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * MMCR2. Check attr.exclude_kernel and address to drop the sample in
 	 * these cases.
 	 */
-	if (event->attr.exclude_kernel && record)
-		if (is_kernel_addr(mfspr(SPRN_SIAR)))
-			record = 0;
+	if (event->attr.exclude_kernel &&
+	    (event->attr.sample_type & PERF_SAMPLE_IP) &&
+	    is_kernel_addr(mfspr(SPRN_SIAR)))
+		record = 0;
 
 	/*
 	 * Finally record data if requested.
-- 
2.30.1

[PATCH AUTOSEL 4.19 09/21] sparc32: Limit memblock allocation to low memory

[Sasha Levin]

From: Andreas Larsson <andreas@gaisler.com>

[ Upstream commit bda166930c37604ffa93f2425426af6921ec575a ]

Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use
memblocks instead of bootmem, but also made high memory available via
memblock allocation which does not work together with e.g. phys_to_virt
and can lead to kernel panic.

This changes back to only low memory being allocatable in the early
stages, now using memblock allocation.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/mm/init_32.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 92634d4e440c..89a9244f2cf0 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -199,6 +199,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	size = memblock_phys_mem_size() - memblock_reserved_size();
 	*pages_avail = (size >> PAGE_SHIFT) - high_pages;
 
+	/* Only allow low memory to be allocated via memblock allocation */
+	memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
+
 	return max_pfn;
 }
 
-- 
2.30.1

[PATCH AUTOSEL 4.19 10/21] sparc64: Use arch_validate_flags() to validate ADI flag

[Sasha Levin]

From: Khalid Aziz <khalid.aziz@oracle.com>

[ Upstream commit 147d8622f2a26ef34beacc60e1ed8b66c2fa457f ]

When userspace calls mprotect() to enable ADI on an address range,
do_mprotect_pkey() calls arch_validate_prot() to validate new
protection flags. arch_validate_prot() for sparc looks at the first
VMA associated with address range to verify if ADI can indeed be
enabled on this address range. This has two issues - (1) Address
range might cover multiple VMAs while arch_validate_prot() looks at
only the first VMA, (2) arch_validate_prot() peeks at VMA without
holding mmap lock which can result in race condition.

arch_validate_flags() from commit c462ac288f2c ("mm: Introduce
arch_validate_flags()") allows for VMA flags to be validated for all
VMAs that cover the address range given by user while holding mmap
lock. This patch updates sparc code to move the VMA check from
arch_validate_prot() to arch_validate_flags() to fix above two
issues.

Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/mman.h | 54 +++++++++++++++++++----------------
 1 file changed, 29 insertions(+), 25 deletions(-)

diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
index f94532f25db1..274217e7ed70 100644
--- a/arch/sparc/include/asm/mman.h
+++ b/arch/sparc/include/asm/mman.h
@@ -57,35 +57,39 @@ static inline int sparc_validate_prot(unsigned long prot, unsigned long addr)
 {
 	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_ADI))
 		return 0;
-	if (prot & PROT_ADI) {
-		if (!adi_capable())
-			return 0;
+	return 1;
+}
 
-		if (addr) {
-			struct vm_area_struct *vma;
+#define arch_validate_flags(vm_flags) arch_validate_flags(vm_flags)
+/* arch_validate_flags() - Ensure combination of flags is valid for a
+ *	VMA.
+ */
+static inline bool arch_validate_flags(unsigned long vm_flags)
+{
+	/* If ADI is being enabled on this VMA, check for ADI
+	 * capability on the platform and ensure VMA is suitable
+	 * for ADI
+	 */
+	if (vm_flags & VM_SPARC_ADI) {
+		if (!adi_capable())
+			return false;
 
-			vma = find_vma(current->mm, addr);
-			if (vma) {
-				/* ADI can not be enabled on PFN
-				 * mapped pages
-				 */
-				if (vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
-					return 0;
+		/* ADI can not be enabled on PFN mapped pages */
+		if (vm_flags & (VM_PFNMAP | VM_MIXEDMAP))
+			return false;
 
-				/* Mergeable pages can become unmergeable
-				 * if ADI is enabled on them even if they
-				 * have identical data on them. This can be
-				 * because ADI enabled pages with identical
-				 * data may still not have identical ADI
-				 * tags on them. Disallow ADI on mergeable
-				 * pages.
-				 */
-				if (vma->vm_flags & VM_MERGEABLE)
-					return 0;
-			}
-		}
+		/* Mergeable pages can become unmergeable
+		 * if ADI is enabled on them even if they
+		 * have identical data on them. This can be
+		 * because ADI enabled pages with identical
+		 * data may still not have identical ADI
+		 * tags on them. Disallow ADI on mergeable
+		 * pages.
+		 */
+		if (vm_flags & VM_MERGEABLE)
+			return false;
 	}
-	return 1;
+	return true;
 }
 #endif /* CONFIG_SPARC64 */
 
-- 
2.30.1

[PATCH AUTOSEL 4.19 11/21] x86, build: use objtool mcount

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 6dafca97803309c3cb5148d449bfa711e41ddef2 ]

Select HAVE_OBJTOOL_MCOUNT if STACK_VALIDATION is selected to use
objtool to generate __mcount_loc sections for dynamic ftrace with
Clang and gcc <5 (later versions of gcc use -mrecord-mcount).

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index af35f5caadbe..4ae2ffa8ad7b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -137,6 +137,7 @@ config X86
 	select HAVE_CONTEXT_TRACKING		if X86_64
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_OBJTOOL_MCOUNT		if STACK_VALIDATION
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DMA_CONTIGUOUS
-- 
2.30.1

[PATCH AUTOSEL 4.19 12/21] PCI: xgene-msi: Fix race in installing chained irq handler

[Sasha Levin]

From: Martin Kaiser <martin@kaiser.cx>

[ Upstream commit a93c00e5f975f23592895b7e83f35de2d36b7633 ]

Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

See also 2cf5a03cb29d ("PCI/keystone: Fix race in installing chained IRQ
handler").

Based on the mail discussion, it seems ok to drop the error handling.

Link: https://lore.kernel.org/r/20210115212435.19940-3-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pci-xgene-msi.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/controller/pci-xgene-msi.c b/drivers/pci/controller/pci-xgene-msi.c
index f4c02da84e59..0bfa5065b440 100644
--- a/drivers/pci/controller/pci-xgene-msi.c
+++ b/drivers/pci/controller/pci-xgene-msi.c
@@ -384,13 +384,9 @@ static int xgene_msi_hwirq_alloc(unsigned int cpu)
 		if (!msi_group->gic_irq)
 			continue;
 
-		irq_set_chained_handler(msi_group->gic_irq,
-					xgene_msi_isr);
-		err = irq_set_handler_data(msi_group->gic_irq, msi_group);
-		if (err) {
-			pr_err("failed to register GIC IRQ handler\n");
-			return -EINVAL;
-		}
+		irq_set_chained_handler_and_data(msi_group->gic_irq,
+			xgene_msi_isr, msi_group);
+
 		/*
 		 * Statically allocate MSI GIC IRQs to each CPU core.
 		 * With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated
-- 
2.30.1

[PATCH AUTOSEL 4.19 13/21] misc: eeprom_93xx46: Add quirk to support Microchip 93LC46B eeprom

[Sasha Levin]

From: Aswath Govindraju <a-govindraju@ti.com>

[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]

A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.

Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.

[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/eeprom_93xx46.c | 15 +++++++++++++++
 include/linux/eeprom_93xx46.h       |  2 ++
 2 files changed, 17 insertions(+)

diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 38766968bfa2..0bcb1864eb5d 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -38,6 +38,10 @@ static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
 		  EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
 };
 
+static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
+	.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
+};
+
 struct eeprom_93xx46_dev {
 	struct spi_device *spi;
 	struct eeprom_93xx46_platform_data *pdata;
@@ -58,6 +62,11 @@ static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
 	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
 }
 
+static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
+{
+	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
+}
+
 static int eeprom_93xx46_read(void *priv, unsigned int off,
 			      void *val, size_t count)
 {
@@ -99,6 +108,11 @@ static int eeprom_93xx46_read(void *priv, unsigned int off,
 		dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
 			cmd_addr, edev->spi->max_speed_hz);
 
+		if (has_quirk_extra_read_cycle(edev)) {
+			cmd_addr <<= 1;
+			bits += 1;
+		}
+
 		spi_message_init(&m);
 
 		t[0].tx_buf = (char *)&cmd_addr;
@@ -366,6 +380,7 @@ static void select_deassert(void *context)
 static const struct of_device_id eeprom_93xx46_of_table[] = {
 	{ .compatible = "eeprom-93xx46", },
 	{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
+	{ .compatible = "microchip,93lc46b", .data = &microchip_93lc46b_data, },
 	{}
 };
 MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index eec7928ff8fe..99580c22f91a 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -16,6 +16,8 @@ struct eeprom_93xx46_platform_data {
 #define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ		(1 << 0)
 /* Instructions such as EWEN are (addrlen + 2) in length. */
 #define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH		(1 << 1)
+/* Add extra cycle after address during a read */
+#define EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE		BIT(2)
 
 	/*
 	 * optional hooks to control additional logic
-- 
2.30.1

[PATCH AUTOSEL 4.19 14/21] PCI: mediatek: Add missing of_node_put() to fix reference leak

[Sasha Levin]

From: Krzysztof Wilczyński <kw@linux.com>

[ Upstream commit 42814c438aac79746d310f413a27d5b0b959c5de ]

The for_each_available_child_of_node helper internally makes use of the
of_get_next_available_child() which performs an of_node_get() on each
iteration when searching for next available child node.

Should an available child node be found, then it would return a device
node pointer with reference count incremented, thus early return from
the middle of the loop requires an explicit of_node_put() to prevent
reference count leak.

To stop the reference leak, explicitly call of_node_put() before
returning after an error occurred.

Link: https://lore.kernel.org/r/20210120184810.3068794-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/pcie-mediatek.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index ca06d8bc01e7..066e9e00de11 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -1089,14 +1089,14 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		err = of_pci_get_devfn(child);
 		if (err < 0) {
 			dev_err(dev, "failed to parse devfn: %d\n", err);
-			return err;
+			goto error_put_node;
 		}
 
 		slot = PCI_SLOT(err);
 
 		err = mtk_pcie_parse_port(pcie, child, slot);
 		if (err)
-			return err;
+			goto error_put_node;
 	}
 
 	err = mtk_pcie_subsys_powerup(pcie);
@@ -1112,6 +1112,9 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		mtk_pcie_subsys_powerdown(pcie);
 
 	return 0;
+error_put_node:
+	of_node_put(child);
+	return err;
 }
 
 static int mtk_pcie_request_resources(struct mtk_pcie *pcie)
-- 
2.30.1

[PATCH AUTOSEL 4.19 15/21] drm/msm/a5xx: Remove overwriting A5XX_PC_DBG_ECO_CNTL register

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ]

The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets
programmed to some different values on a per-model basis.
At least, this is what we intend to do here;

Unfortunately, though, this register is being overwritten with a
static magic number, right after applying the GPU-specific
configuration (including the GPU-specific quirks) and that is
effectively nullifying the efforts.

Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL
register in order to retain the wanted configuration for the
target GPU.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index d29a58bd2f7a..776bbe9775e9 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -681,8 +681,6 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	if (adreno_gpu->info->quirks & ADRENO_QUIRK_TWO_PASS_USE_WFI)
 		gpu_rmw(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0, (1 << 8));
 
-	gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0xc0200100);
-
 	/* Enable USE_RETENTION_FLOPS */
 	gpu_write(gpu, REG_A5XX_CP_CHICKEN_DBG, 0x02000000);
 
-- 
2.30.1

[PATCH AUTOSEL 4.19 16/21] PCI: Fix pci_register_io_range() memory leak

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit f6bda644fa3a7070621c3bf12cd657f69a42f170 ]

Kmemleak reports:

  unreferenced object 0xc328de40 (size 64):
    comm "kworker/1:1", pid 21, jiffies 4294938212 (age 1484.670s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 e0 d8 fc eb 00 00 00 00  ................
      00 00 10 fe 00 00 00 00 00 00 00 00 00 00 00 00  ................

  backtrace:
    [<ad758d10>] pci_register_io_range+0x3c/0x80
    [<2c7f139e>] of_pci_range_to_resource+0x48/0xc0
    [<f079ecc8>] devm_of_pci_get_host_bridge_resources.constprop.0+0x2ac/0x3ac
    [<e999753b>] devm_of_pci_bridge_init+0x60/0x1b8
    [<a895b229>] devm_pci_alloc_host_bridge+0x54/0x64
    [<e451ddb0>] rcar_pcie_probe+0x2c/0x644

In case a PCI host driver's probe is deferred, the same I/O range may be
allocated again, and be ignored, causing a memory leak.

Fix this by (a) letting logic_pio_register_range() return -EEXIST if the
passed range already exists, so pci_register_io_range() will free it, and
by (b) making pci_register_io_range() not consider -EEXIST an error
condition.

Link: https://lore.kernel.org/r/20210202100332.829047-1-geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/pci.c | 4 ++++
 lib/logic_pio.c   | 3 +++
 2 files changed, 7 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index cd628dd73719..40fe8aaaee0d 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3810,6 +3810,10 @@ int pci_register_io_range(struct fwnode_handle *fwnode, phys_addr_t addr,
 	ret = logic_pio_register_range(range);
 	if (ret)
 		kfree(range);
+
+	/* Ignore duplicates due to deferred probing */
+	if (ret == -EEXIST)
+		ret = 0;
 #endif
 
 	return ret;
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
index 905027574e5d..774bb02fff10 100644
--- a/lib/logic_pio.c
+++ b/lib/logic_pio.c
@@ -27,6 +27,8 @@ static DEFINE_MUTEX(io_range_mutex);
  * @new_range: pointer to the IO range to be registered.
  *
  * Returns 0 on success, the error code in case of failure.
+ * If the range already exists, -EEXIST will be returned, which should be
+ * considered a success.
  *
  * Register a new IO range node in the IO range list.
  */
@@ -49,6 +51,7 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
 	list_for_each_entry(range, &io_range_list, list) {
 		if (range->fwnode == new_range->fwnode) {
 			/* range already there */
+			ret = -EEXIST;
 			goto end_register;
 		}
 		if (range->flags == LOGIC_PIO_CPU_MMIO &&
-- 
2.30.1

[PATCH AUTOSEL 4.19 17/21] i40e: Fix memory leak in i40e_probe

[Sasha Levin]

From: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>

[ Upstream commit 58cab46c622d6324e47bd1c533693c94498e4172 ]

Struct i40e_veb is allocated in function i40e_setup_pf_switch, and
stored to an array field veb inside struct i40e_pf. However when
i40e_setup_misc_vector fails, this memory leaks.

Fix this by calling exit and teardown functions.

Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a728b6a7872c..90314f78c204 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -13977,6 +13977,8 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		if (err) {
 			dev_info(&pdev->dev,
 				 "setup of misc vector failed: %d\n", err);
+			i40e_cloud_filter_exit(pf);
+			i40e_fdir_teardown(pf);
 			goto err_vsis;
 		}
 	}
-- 
2.30.1

[PATCH AUTOSEL 4.19 18/21] s390/smp: __smp_rescan_cpus() - move cpumask away from stack

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 62c8dca9e194326802b43c60763f856d782b225c ]

Avoid a potentially large stack frame and overflow by making
"cpumask_t avail" a static variable. There is no concurrent
access due to the existing locking.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index c47bd581a08a..bce678c7179c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -751,7 +751,7 @@ static int smp_add_core(struct sclp_core_entry *core, cpumask_t *avail,
 static int __smp_rescan_cpus(struct sclp_core_info *info, bool early)
 {
 	struct sclp_core_entry *core;
-	cpumask_t avail;
+	static cpumask_t avail;
 	bool configured;
 	u16 core_id;
 	int nr, i;
-- 
2.30.1

[PATCH AUTOSEL 4.19 19/21] scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ]

If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.

Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 1c69515e870c..5e373a3752ba 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1569,14 +1569,9 @@ check_mgmt:
 		}
 		rc = iscsi_prep_scsi_cmd_pdu(conn->task);
 		if (rc) {
-			if (rc == -ENOMEM || rc == -EACCES) {
-				spin_lock_bh(&conn->taskqueuelock);
-				list_add_tail(&conn->task->running,
-					      &conn->cmdqueue);
-				conn->task = NULL;
-				spin_unlock_bh(&conn->taskqueuelock);
-				goto done;
-			} else
+			if (rc == -ENOMEM || rc == -EACCES)
+				fail_scsi_task(conn->task, DID_IMM_RETRY);
+			else
 				fail_scsi_task(conn->task, DID_ABORT);
 			spin_lock_bh(&conn->taskqueuelock);
 			continue;
-- 
2.30.1

[PATCH AUTOSEL 4.19 20/21] scsi: target: core: Add cmd length set before cmd complete

[Sasha Levin]

From: Aleksandr Miloserdov <a.miloserdov@yadro.com>

[ Upstream commit 1c73e0c5e54d5f7d77f422a10b03ebe61eaed5ad ]

TCM doesn't properly handle underflow case for service actions. One way to
prevent it is to always complete command with
target_complete_cmd_with_length(), however it requires access to data_sg,
which is not always available.

This change introduces target_set_cmd_data_length() function which allows
to set command data length before completing it.

Link: https://lore.kernel.org/r/20210209072202.41154-2-a.miloserdov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_transport.c | 15 +++++++++++----
 include/target/target_core_backend.h   |  1 +
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index f1b730b77a31..bdada97cd4fe 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -841,11 +841,9 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status)
 }
 EXPORT_SYMBOL(target_complete_cmd);
 
-void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int length)
+void target_set_cmd_data_length(struct se_cmd *cmd, int length)
 {
-	if ((scsi_status == SAM_STAT_GOOD ||
-	     cmd->se_cmd_flags & SCF_TREAT_READ_AS_NORMAL) &&
-	    length < cmd->data_length) {
+	if (length < cmd->data_length) {
 		if (cmd->se_cmd_flags & SCF_UNDERFLOW_BIT) {
 			cmd->residual_count += cmd->data_length - length;
 		} else {
@@ -855,6 +853,15 @@ void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int len
 
 		cmd->data_length = length;
 	}
+}
+EXPORT_SYMBOL(target_set_cmd_data_length);
+
+void target_complete_cmd_with_length(struct se_cmd *cmd, u8 scsi_status, int length)
+{
+	if (scsi_status == SAM_STAT_GOOD ||
+	    cmd->se_cmd_flags & SCF_TREAT_READ_AS_NORMAL) {
+		target_set_cmd_data_length(cmd, length);
+	}
 
 	target_complete_cmd(cmd, scsi_status);
 }
diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h
index 51b6f50eabee..0deeff9b4496 100644
--- a/include/target/target_core_backend.h
+++ b/include/target/target_core_backend.h
@@ -69,6 +69,7 @@ int	transport_backend_register(const struct target_backend_ops *);
 void	target_backend_unregister(const struct target_backend_ops *);
 
 void	target_complete_cmd(struct se_cmd *, u8);
+void	target_set_cmd_data_length(struct se_cmd *, int);
 void	target_complete_cmd_with_length(struct se_cmd *, u8, int);
 
 void	transport_copy_sense_to_cmd(struct se_cmd *, unsigned char *);
-- 
2.30.1

[PATCH AUTOSEL 4.19 21/21] scsi: target: core: Prevent underflow for service actions

[Sasha Levin]

From: Aleksandr Miloserdov <a.miloserdov@yadro.com>

[ Upstream commit 14d24e2cc77411301e906a8cf41884739de192de ]

TCM buffer length doesn't necessarily equal 8 + ADDITIONAL LENGTH which
might be considered an underflow in case of Data-In size being greater than
8 + ADDITIONAL LENGTH. So truncate buffer length to prevent underflow.

Link: https://lore.kernel.org/r/20210209072202.41154-3-a.miloserdov@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_pr.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 10db5656fd5d..949879f2f1d1 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -3742,6 +3742,7 @@ core_scsi3_pri_read_keys(struct se_cmd *cmd)
 	spin_unlock(&dev->t10_pr.registration_lock);
 
 	put_unaligned_be32(add_len, &buf[4]);
+	target_set_cmd_data_length(cmd, 8 + add_len);
 
 	transport_kunmap_data_sg(cmd);
 
@@ -3760,7 +3761,7 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
 	struct t10_pr_registration *pr_reg;
 	unsigned char *buf;
 	u64 pr_res_key;
-	u32 add_len = 16; /* Hardcoded to 16 when a reservation is held. */
+	u32 add_len = 0;
 
 	if (cmd->data_length < 8) {
 		pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u"
@@ -3778,8 +3779,9 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
 	pr_reg = dev->dev_pr_res_holder;
 	if (pr_reg) {
 		/*
-		 * Set the hardcoded Additional Length
+		 * Set the Additional Length to 16 when a reservation is held
 		 */
+		add_len = 16;
 		put_unaligned_be32(add_len, &buf[4]);
 
 		if (cmd->data_length < 22)
@@ -3815,6 +3817,8 @@ core_scsi3_pri_read_reservation(struct se_cmd *cmd)
 			  (pr_reg->pr_res_type & 0x0f);
 	}
 
+	target_set_cmd_data_length(cmd, 8 + add_len);
+
 err:
 	spin_unlock(&dev->dev_reservation_lock);
 	transport_kunmap_data_sg(cmd);
@@ -3833,7 +3837,7 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
 	struct se_device *dev = cmd->se_dev;
 	struct t10_reservation *pr_tmpl = &dev->t10_pr;
 	unsigned char *buf;
-	u16 add_len = 8; /* Hardcoded to 8. */
+	u16 len = 8; /* Hardcoded to 8. */
 
 	if (cmd->data_length < 6) {
 		pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:"
@@ -3845,7 +3849,7 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
 	if (!buf)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
-	put_unaligned_be16(add_len, &buf[0]);
+	put_unaligned_be16(len, &buf[0]);
 	buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
 	buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
 	buf[2] |= 0x04; /* ATP_C: All Target Ports Capable bit */
@@ -3874,6 +3878,8 @@ core_scsi3_pri_report_capabilities(struct se_cmd *cmd)
 	buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */
 	buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */
 
+	target_set_cmd_data_length(cmd, len);
+
 	transport_kunmap_data_sg(cmd);
 
 	return 0;
@@ -4034,6 +4040,7 @@ core_scsi3_pri_read_full_status(struct se_cmd *cmd)
 	 * Set ADDITIONAL_LENGTH
 	 */
 	put_unaligned_be32(add_len, &buf[4]);
+	target_set_cmd_data_length(cmd, 8 + add_len);
 
 	transport_kunmap_data_sg(cmd);
 
-- 
2.30.1