[PATCH AUTOSEL 4.14 01/13] udf: fix silent AED tagLocation corruption

[PATCH AUTOSEL 4.14 01/13] udf: fix silent AED tagLocation corruption

[Sasha Levin]

From: "Steven J. Magnani" <magnani@ieee.org>

[ Upstream commit 63c9e47a1642fc817654a1bc18a6ec4bbcc0f056 ]

When extending a file, udf_do_extend_file() may enter following empty
indirect extent. At the end of udf_do_extend_file() we revert prev_epos
to point to the last written extent. However if we end up not adding any
further extent in udf_do_extend_file(), the reverting points prev_epos
into the header area of the AED and following updates of the extents
(in udf_update_extents()) will corrupt the header.

Make sure that we do not follow indirect extent if we are not going to
add any more extents so that returning back to the last written extent
works correctly.

Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org
Signed-off-by: Steven J. Magnani <magnani@ieee.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/inode.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/fs/udf/inode.c b/fs/udf/inode.c
index dd57bd446340..e0e2bc19c929 100644
--- a/fs/udf/inode.c
+++ b/fs/udf/inode.c
@@ -540,11 +540,14 @@ static int udf_do_extend_file(struct inode *inode,
 
 		udf_write_aext(inode, last_pos, &last_ext->extLocation,
 				last_ext->extLength, 1);
+
 		/*
-		 * We've rewritten the last extent but there may be empty
-		 * indirect extent after it - enter it.
+		 * We've rewritten the last extent. If we are going to add
+		 * more extents, we may need to enter possible following
+		 * empty indirect extent.
 		 */
-		udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
+		if (new_block_bytes || prealloc_len)
+			udf_next_aext(inode, last_pos, &tmploc, &tmplen, 0);
 	}
 
 	/* Managed to do everything necessary? */
-- 
2.30.1

[PATCH AUTOSEL 4.14 02/13] mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 0bb7e560f821c7770973a94e346654c4bdccd42c ]

If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()'
call.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mxs-mmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
index add1e70195ea..7125687faf76 100644
--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -659,7 +659,7 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 
 	ret = mmc_of_parse(mmc);
 	if (ret)
-		goto out_clk_disable;
+		goto out_free_dma;
 
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
-- 
2.30.1

[PATCH AUTOSEL 4.14 03/13] mmc: mediatek: fix race condition between msdc_request_timeout and irq

[Sasha Levin]

From: Chaotian Jing <chaotian.jing@mediatek.com>

[ Upstream commit 0354ca6edd464a2cf332f390581977b8699ed081 ]

when get request SW timeout, if CMD/DAT xfer done irq coming right now,
then there is race between the msdc_request_timeout work and irq handler,
and the host->cmd and host->data may set to NULL in irq handler. also,
current flow ensure that only one path can go to msdc_request_done(), so
no need check the return value of cancel_delayed_work().

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Link: https://lore.kernel.org/r/20201218071611.12276-1-chaotian.jing@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mtk-sd.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 1a5d5c40324b..e51a62cff5ec 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -758,13 +758,13 @@ static void msdc_track_cmd_data(struct msdc_host *host,
 static void msdc_request_done(struct msdc_host *host, struct mmc_request *mrq)
 {
 	unsigned long flags;
-	bool ret;
 
-	ret = cancel_delayed_work(&host->req_timeout);
-	if (!ret) {
-		/* delay work already running */
-		return;
-	}
+	/*
+	 * No need check the return value of cancel_delayed_work, as only ONE
+	 * path will go here!
+	 */
+	cancel_delayed_work(&host->req_timeout);
+
 	spin_lock_irqsave(&host->lock, flags);
 	host->mrq = NULL;
 	spin_unlock_irqrestore(&host->lock, flags);
@@ -782,7 +782,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 	bool done = false;
 	bool sbc_error;
 	unsigned long flags;
-	u32 *rsp = cmd->resp;
+	u32 *rsp;
 
 	if (mrq->sbc && cmd == mrq->cmd &&
 	    (events & (MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR
@@ -803,6 +803,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events,
 
 	if (done)
 		return true;
+	rsp = cmd->resp;
 
 	sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask);
 
@@ -984,7 +985,7 @@ static void msdc_data_xfer_next(struct msdc_host *host,
 static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 				struct mmc_request *mrq, struct mmc_data *data)
 {
-	struct mmc_command *stop = data->stop;
+	struct mmc_command *stop;
 	unsigned long flags;
 	bool done;
 	unsigned int check_data = events &
@@ -1000,6 +1001,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events,
 
 	if (done)
 		return true;
+	stop = data->stop;
 
 	if (check_data || (stop && stop->error)) {
 		dev_dbg(host->dev, "DMA status: 0x%8X\n",
-- 
2.30.1

[PATCH AUTOSEL 4.14 04/13] powerpc: improve handling of unrecoverable system reset

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 11cb0a25f71818ca7ab4856548ecfd83c169aa4d ]

If an unrecoverable system reset hits in process context, the system
does not have to panic. Similar to machine check, call nmi_exit()
before die().

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-26-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/traps.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 0f1a888c04a8..05c1aabad01c 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -360,8 +360,11 @@ out:
 		die("Unrecoverable nested System Reset", regs, SIGABRT);
 #endif
 	/* Must die if the interrupt is not recoverable */
-	if (!(regs->msr & MSR_RI))
+	if (!(regs->msr & MSR_RI)) {
+		/* For the reason explained in die_mce, nmi_exit before die */
+		nmi_exit();
 		die("Unrecoverable System Reset", regs, SIGABRT);
+	}
 
 	if (!nested)
 		nmi_exit();
-- 
2.30.1

[PATCH AUTOSEL 4.14 05/13] powerpc/perf: Record counter overflow always if SAMPLE_IP is unset

[Sasha Levin]

From: Athira Rajeev <atrajeev@linux.vnet.ibm.com>

[ Upstream commit d137845c973147a22622cc76c7b0bc16f6206323 ]

While sampling for marked events, currently we record the sample only
if the SIAR valid bit of Sampled Instruction Event Register (SIER) is
set. SIAR_VALID bit is used for fetching the instruction address from
Sampled Instruction Address Register(SIAR). But there are some
usecases, where the user is interested only in the PMU stats at each
counter overflow and the exact IP of the overflow event is not
required. Dropping SIAR invalid samples will fail to record some of
the counter overflows in such cases.

Example of such usecase is dumping the PMU stats (event counts) after
some regular amount of instructions/events from the userspace (ex: via
ptrace). Here counter overflow is indicated to userspace via signal
handler, and captured by monitoring and enabling I/O signaling on the
event file descriptor. In these cases, we expect to get
sample/overflow indication after each specified sample_period.

Perf event attribute will not have PERF_SAMPLE_IP set in the
sample_type if exact IP of the overflow event is not requested. So
while profiling if SAMPLE_IP is not set, just record the counter
overflow irrespective of SIAR_VALID check.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Reflow comment and if formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612516492-1428-1-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/perf/core-book3s.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 56f16c803590..2669847434b8 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -2055,7 +2055,17 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			left += period;
 			if (left <= 0)
 				left = period;
-			record = siar_valid(regs);
+
+			/*
+			 * If address is not requested in the sample via
+			 * PERF_SAMPLE_IP, just record that sample irrespective
+			 * of SIAR valid check.
+			 */
+			if (event->attr.sample_type & PERF_SAMPLE_IP)
+				record = siar_valid(regs);
+			else
+				record = 1;
+
 			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)
@@ -2073,9 +2083,10 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * MMCR2. Check attr.exclude_kernel and address to drop the sample in
 	 * these cases.
 	 */
-	if (event->attr.exclude_kernel && record)
-		if (is_kernel_addr(mfspr(SPRN_SIAR)))
-			record = 0;
+	if (event->attr.exclude_kernel &&
+	    (event->attr.sample_type & PERF_SAMPLE_IP) &&
+	    is_kernel_addr(mfspr(SPRN_SIAR)))
+		record = 0;
 
 	/*
 	 * Finally record data if requested.
-- 
2.30.1

[PATCH AUTOSEL 4.14 06/13] sparc32: Limit memblock allocation to low memory

[Sasha Levin]

From: Andreas Larsson <andreas@gaisler.com>

[ Upstream commit bda166930c37604ffa93f2425426af6921ec575a ]

Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use
memblocks instead of bootmem, but also made high memory available via
memblock allocation which does not work together with e.g. phys_to_virt
and can lead to kernel panic.

This changes back to only low memory being allocatable in the early
stages, now using memblock allocation.

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/mm/init_32.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 95fe4f081ba3..372a4f08ddf8 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -230,6 +230,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
 	reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
 	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
 
+	/* Only allow low memory to be allocated via memblock allocation */
+	memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
+
 	return max_pfn;
 }
 
-- 
2.30.1

[PATCH AUTOSEL 4.14 07/13] x86, build: use objtool mcount

[Sasha Levin]

From: Sami Tolvanen <samitolvanen@google.com>

[ Upstream commit 6dafca97803309c3cb5148d449bfa711e41ddef2 ]

Select HAVE_OBJTOOL_MCOUNT if STACK_VALIDATION is selected to use
objtool to generate __mcount_loc sections for dynamic ftrace with
Clang and gcc <5 (later versions of gcc use -mrecord-mcount).

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c55870ac907e..241bb049e803 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -126,6 +126,7 @@ config X86
 	select HAVE_CONTEXT_TRACKING		if X86_64
 	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
+	select HAVE_OBJTOOL_MCOUNT		if STACK_VALIDATION
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DMA_API_DEBUG
-- 
2.30.1

[PATCH AUTOSEL 4.14 08/13] PCI: xgene-msi: Fix race in installing chained irq handler

[Sasha Levin]

From: Martin Kaiser <martin@kaiser.cx>

[ Upstream commit a93c00e5f975f23592895b7e83f35de2d36b7633 ]

Fix a race where a pending interrupt could be received and the handler
called before the handler's data has been setup, by converting to
irq_set_chained_handler_and_data().

See also 2cf5a03cb29d ("PCI/keystone: Fix race in installing chained IRQ
handler").

Based on the mail discussion, it seems ok to drop the error handling.

Link: https://lore.kernel.org/r/20210115212435.19940-3-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pci-xgene-msi.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/host/pci-xgene-msi.c b/drivers/pci/host/pci-xgene-msi.c
index 1f42a202b021..784b3f61199e 100644
--- a/drivers/pci/host/pci-xgene-msi.c
+++ b/drivers/pci/host/pci-xgene-msi.c
@@ -393,13 +393,9 @@ static int xgene_msi_hwirq_alloc(unsigned int cpu)
 		if (!msi_group->gic_irq)
 			continue;
 
-		irq_set_chained_handler(msi_group->gic_irq,
-					xgene_msi_isr);
-		err = irq_set_handler_data(msi_group->gic_irq, msi_group);
-		if (err) {
-			pr_err("failed to register GIC IRQ handler\n");
-			return -EINVAL;
-		}
+		irq_set_chained_handler_and_data(msi_group->gic_irq,
+			xgene_msi_isr, msi_group);
+
 		/*
 		 * Statically allocate MSI GIC IRQs to each CPU core.
 		 * With 8-core X-Gene v1, 2 MSI GIC IRQs are allocated
-- 
2.30.1

[PATCH AUTOSEL 4.14 09/13] misc: eeprom_93xx46: Add quirk to support Microchip 93LC46B eeprom

[Sasha Levin]

From: Aswath Govindraju <a-govindraju@ti.com>

[ Upstream commit f6f1f8e6e3eea25f539105d48166e91f0ab46dd1 ]

A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.

Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.

[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/eeprom/eeprom_93xx46.c | 15 +++++++++++++++
 include/linux/eeprom_93xx46.h       |  2 ++
 2 files changed, 17 insertions(+)

diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 38766968bfa2..0bcb1864eb5d 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -38,6 +38,10 @@ static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = {
 		  EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH,
 };
 
+static const struct eeprom_93xx46_devtype_data microchip_93lc46b_data = {
+	.quirks = EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE,
+};
+
 struct eeprom_93xx46_dev {
 	struct spi_device *spi;
 	struct eeprom_93xx46_platform_data *pdata;
@@ -58,6 +62,11 @@ static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev)
 	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH;
 }
 
+static inline bool has_quirk_extra_read_cycle(struct eeprom_93xx46_dev *edev)
+{
+	return edev->pdata->quirks & EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE;
+}
+
 static int eeprom_93xx46_read(void *priv, unsigned int off,
 			      void *val, size_t count)
 {
@@ -99,6 +108,11 @@ static int eeprom_93xx46_read(void *priv, unsigned int off,
 		dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n",
 			cmd_addr, edev->spi->max_speed_hz);
 
+		if (has_quirk_extra_read_cycle(edev)) {
+			cmd_addr <<= 1;
+			bits += 1;
+		}
+
 		spi_message_init(&m);
 
 		t[0].tx_buf = (char *)&cmd_addr;
@@ -366,6 +380,7 @@ static void select_deassert(void *context)
 static const struct of_device_id eeprom_93xx46_of_table[] = {
 	{ .compatible = "eeprom-93xx46", },
 	{ .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, },
+	{ .compatible = "microchip,93lc46b", .data = &microchip_93lc46b_data, },
 	{}
 };
 MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
diff --git a/include/linux/eeprom_93xx46.h b/include/linux/eeprom_93xx46.h
index eec7928ff8fe..99580c22f91a 100644
--- a/include/linux/eeprom_93xx46.h
+++ b/include/linux/eeprom_93xx46.h
@@ -16,6 +16,8 @@ struct eeprom_93xx46_platform_data {
 #define EEPROM_93XX46_QUIRK_SINGLE_WORD_READ		(1 << 0)
 /* Instructions such as EWEN are (addrlen + 2) in length. */
 #define EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH		(1 << 1)
+/* Add extra cycle after address during a read */
+#define EEPROM_93XX46_QUIRK_EXTRA_READ_CYCLE		BIT(2)
 
 	/*
 	 * optional hooks to control additional logic
-- 
2.30.1

[PATCH AUTOSEL 4.14 10/13] PCI: mediatek: Add missing of_node_put() to fix reference leak

[Sasha Levin]

From: Krzysztof Wilczyński <kw@linux.com>

[ Upstream commit 42814c438aac79746d310f413a27d5b0b959c5de ]

The for_each_available_child_of_node helper internally makes use of the
of_get_next_available_child() which performs an of_node_get() on each
iteration when searching for next available child node.

Should an available child node be found, then it would return a device
node pointer with reference count incremented, thus early return from
the middle of the loop requires an explicit of_node_put() to prevent
reference count leak.

To stop the reference leak, explicitly call of_node_put() before
returning after an error occurred.

Link: https://lore.kernel.org/r/20210120184810.3068794-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pcie-mediatek.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/host/pcie-mediatek.c b/drivers/pci/host/pcie-mediatek.c
index c896bb9ef968..60c3110b5151 100644
--- a/drivers/pci/host/pcie-mediatek.c
+++ b/drivers/pci/host/pcie-mediatek.c
@@ -1042,14 +1042,14 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		err = of_pci_get_devfn(child);
 		if (err < 0) {
 			dev_err(dev, "failed to parse devfn: %d\n", err);
-			return err;
+			goto error_put_node;
 		}
 
 		slot = PCI_SLOT(err);
 
 		err = mtk_pcie_parse_port(pcie, child, slot);
 		if (err)
-			return err;
+			goto error_put_node;
 	}
 
 	err = mtk_pcie_subsys_powerup(pcie);
@@ -1065,6 +1065,9 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 		mtk_pcie_subsys_powerdown(pcie);
 
 	return 0;
+error_put_node:
+	of_node_put(child);
+	return err;
 }
 
 static int mtk_pcie_request_resources(struct mtk_pcie *pcie)
-- 
2.30.1

[PATCH AUTOSEL 4.14 11/13] drm/msm/a5xx: Remove overwriting A5XX_PC_DBG_ECO_CNTL register

[Sasha Levin]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

[ Upstream commit 8f03c30cb814213e36032084a01f49a9e604a3e3 ]

The PC_DBG_ECO_CNTL register on the Adreno A5xx family gets
programmed to some different values on a per-model basis.
At least, this is what we intend to do here;

Unfortunately, though, this register is being overwritten with a
static magic number, right after applying the GPU-specific
configuration (including the GPU-specific quirks) and that is
effectively nullifying the efforts.

Let's remove the redundant and wrong write to the PC_DBG_ECO_CNTL
register in order to retain the wanted configuration for the
target GPU.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
index f1aaa76cc2e4..92e767f3cc16 100644
--- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
@@ -472,8 +472,6 @@ static int a5xx_hw_init(struct msm_gpu *gpu)
 	if (adreno_gpu->info->quirks & ADRENO_QUIRK_TWO_PASS_USE_WFI)
 		gpu_rmw(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0, (1 << 8));
 
-	gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0xc0200100);
-
 	/* Enable USE_RETENTION_FLOPS */
 	gpu_write(gpu, REG_A5XX_CP_CHICKEN_DBG, 0x02000000);
 
-- 
2.30.1

[PATCH AUTOSEL 4.14 12/13] s390/smp: __smp_rescan_cpus() - move cpumask away from stack

[Sasha Levin]

From: Heiko Carstens <hca@linux.ibm.com>

[ Upstream commit 62c8dca9e194326802b43c60763f856d782b225c ]

Avoid a potentially large stack frame and overflow by making
"cpumask_t avail" a static variable. There is no concurrent
access due to the existing locking.

Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 40946c8587a5..d43b48d8f67d 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -761,7 +761,7 @@ static int smp_add_core(struct sclp_core_entry *core, cpumask_t *avail,
 static int __smp_rescan_cpus(struct sclp_core_info *info, bool early)
 {
 	struct sclp_core_entry *core;
-	cpumask_t avail;
+	static cpumask_t avail;
 	bool configured;
 	u16 core_id;
 	int nr, i;
-- 
2.30.1

[PATCH AUTOSEL 4.14 13/13] scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit d28d48c699779973ab9a3bd0e5acfa112bd4fdef ]

If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.

Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libiscsi.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index f7e1af90849b..fffaf9b3476d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1569,14 +1569,9 @@ check_mgmt:
 		}
 		rc = iscsi_prep_scsi_cmd_pdu(conn->task);
 		if (rc) {
-			if (rc == -ENOMEM || rc == -EACCES) {
-				spin_lock_bh(&conn->taskqueuelock);
-				list_add_tail(&conn->task->running,
-					      &conn->cmdqueue);
-				conn->task = NULL;
-				spin_unlock_bh(&conn->taskqueuelock);
-				goto done;
-			} else
+			if (rc == -ENOMEM || rc == -EACCES)
+				fail_scsi_task(conn->task, DID_IMM_RETRY);
+			else
 				fail_scsi_task(conn->task, DID_ABORT);
 			spin_lock_bh(&conn->taskqueuelock);
 			continue;
-- 
2.30.1

Re: [PATCH AUTOSEL 4.14 06/13] sparc32: Limit memblock allocation to low memory

[Andreas Larsson]

On 2021-03-02 12:58, Sasha Levin wrote:
> From: Andreas Larsson <andreas@gaisler.com>
> 
> [ Upstream commit bda166930c37604ffa93f2425426af6921ec575a ]
> 
> Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use
> memblocks instead of bootmem, but also made high memory available via
> memblock allocation which does not work together with e.g. phys_to_virt
> and can lead to kernel panic.
> 
> This changes back to only low memory being allocatable in the early
> stages, now using memblock allocation.
> 
> Signed-off-by: Andreas Larsson <andreas@gaisler.com>
> Acked-by: Mike Rapoport <rppt@linux.ibm.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>   arch/sparc/mm/init_32.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
> index 95fe4f081ba3..372a4f08ddf8 100644
> --- a/arch/sparc/mm/init_32.c
> +++ b/arch/sparc/mm/init_32.c
> @@ -230,6 +230,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
>   	reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
>   	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
>   
> +	/* Only allow low memory to be allocated via memblock allocation */
> +	memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
> +
>   	return max_pfn;
>   }
>   
> 

This is not needed for 4.14, and will not compile, as the problem it
fixes was introduced in 4.19.

-- 
Andreas Larsson

Re: [PATCH AUTOSEL 4.14 06/13] sparc32: Limit memblock allocation to low memory

[Sasha Levin]

On Wed, Mar 03, 2021 at 09:19:38AM +0100, Andreas Larsson wrote:
>On 2021-03-02 12:58, Sasha Levin wrote:
>>From: Andreas Larsson <andreas@gaisler.com>
>>
>>[ Upstream commit bda166930c37604ffa93f2425426af6921ec575a ]
>>
>>Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use
>>memblocks instead of bootmem, but also made high memory available via
>>memblock allocation which does not work together with e.g. phys_to_virt
>>and can lead to kernel panic.
>>
>>This changes back to only low memory being allocatable in the early
>>stages, now using memblock allocation.
>>
>>Signed-off-by: Andreas Larsson <andreas@gaisler.com>
>>Acked-by: Mike Rapoport <rppt@linux.ibm.com>
>>Signed-off-by: David S. Miller <davem@davemloft.net>
>>Signed-off-by: Sasha Levin <sashal@kernel.org>
>>---
>>  arch/sparc/mm/init_32.c | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>>diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
>>index 95fe4f081ba3..372a4f08ddf8 100644
>>--- a/arch/sparc/mm/init_32.c
>>+++ b/arch/sparc/mm/init_32.c
>>@@ -230,6 +230,9 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
>>  	reserve_bootmem((bootmap_pfn << PAGE_SHIFT), size, BOOTMEM_DEFAULT);
>>  	*pages_avail -= PAGE_ALIGN(size) >> PAGE_SHIFT;
>>+	/* Only allow low memory to be allocated via memblock allocation */
>>+	memblock_set_current_limit(max_low_pfn << PAGE_SHIFT);
>>+
>>  	return max_pfn;
>>  }
>>
>
>This is not needed for 4.14, and will not compile, as the problem it
>fixes was introduced in 4.19.

I'll drop it, thanks!

-- 
Thanks,
Sasha