stable.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Yu-Tung Chang <mtwget@gmail.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.4 49/50] rtc: rx8010: select REGMAP_I2C
Date: Fri, 24 Sep 2021 14:44:38 +0200	[thread overview]
Message-ID: <20210924124333.902689505@linuxfoundation.org> (raw)
In-Reply-To: <20210924124332.229289734@linuxfoundation.org>

From: Yu-Tung Chang <mtwget@gmail.com>

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ]

The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9ae7ce3f5069..0ad8d84aeb33 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -625,6 +625,7 @@ config RTC_DRV_FM3130
 
 config RTC_DRV_RX8010
 	tristate "Epson RX8010SJ"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Epson RX8010SJ RTC
 	  chip.
-- 
2.33.0




  parent reply	other threads:[~2021-09-24 12:57 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-24 12:43 [PATCH 5.4 00/50] 5.4.149-rc1 review Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 01/50] PCI: pci-bridge-emul: Fix big-endian support Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 02/50] PCI: aardvark: Indicate error in val when config read fails Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 03/50] PCI: pci-bridge-emul: Add PCIe Root Capabilities Register Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 04/50] PCI: aardvark: Fix reporting CRS value Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 05/50] PCI/ACPI: Add Ampere Altra SOC MCFG quirk Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 06/50] KVM: remember position in kvm->vcpus array Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 07/50] console: consume APC, DM, DCS Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 08/50] s390/pci_mmio: fully validate the VMA before calling follow_pte() Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 09/50] ARM: Qualify enabling of swiotlb_init() Greg Kroah-Hartman
2021-09-24 12:43 ` [PATCH 5.4 10/50] apparmor: remove duplicate macro list_entry_is_head() Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 11/50] ARM: 9077/1: PLT: Move struct plt_entries definition to header Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 12/50] ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link() Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 13/50] ARM: 9079/1: ftrace: Add MODULE_PLTS support Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 14/50] ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 15/50] sctp: validate chunk size in __rcv_asconf_lookup Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 16/50] sctp: add param size validation for SCTP_PARAM_SET_PRIMARY Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 17/50] staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb() Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 18/50] um: virtio_uml: fix memory leak on init failures Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 19/50] dmaengine: acpi: Avoid comparison GSI with Linux vIRQ Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 20/50] thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 21/50] 9p/trans_virtio: Remove sysfs file on probe failure Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 22/50] prctl: allow to setup brk for et_dyn executables Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 23/50] nilfs2: use refcount_dec_and_lock() to fix potential UAF Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 24/50] profiling: fix shift-out-of-bounds bugs Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 25/50] pwm: lpc32xx: Dont modify HW state in .probe() after the PWM chip was registered Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 26/50] pwm: mxs: " Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 27/50] phy: avoid unnecessary link-up delay in polling mode Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 28/50] net: stmmac: reset Tx desc base address before restarting Tx Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 29/50] Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 30/50] thermal/core: Fix thermal_cooling_device_register() prototype Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 31/50] drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION() Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 32/50] parisc: Move pci_dev_is_behind_card_dino to where it is used Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 33/50] dmaengine: sprd: Add missing MODULE_DEVICE_TABLE Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 34/50] dmaengine: ioat: depends on !UML Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 35/50] dmaengine: xilinx_dma: Set DMA mask for coherent APIs Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 36/50] ceph: request Fw caps before updating the mtime in ceph_write_iter Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 37/50] ceph: lockdep annotations for try_nonblocking_invalidate Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 38/50] btrfs: fix lockdep warning while mounting sprout fs Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 39/50] nilfs2: fix memory leak in nilfs_sysfs_create_device_group Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 40/50] nilfs2: fix NULL pointer in nilfs_##name##_attr_release Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 41/50] nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 42/50] nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 43/50] nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 44/50] nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 45/50] pwm: img: Dont modify HW state in .remove() callback Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 46/50] pwm: rockchip: " Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 47/50] pwm: stm32-lp: " Greg Kroah-Hartman
2021-09-24 12:44 ` [PATCH 5.4 48/50] blk-throttle: fix UAF by deleteing timer in blk_throtl_exit() Greg Kroah-Hartman
2021-09-24 12:44 ` Greg Kroah-Hartman [this message]
2021-09-24 12:44 ` [PATCH 5.4 50/50] drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV Greg Kroah-Hartman
2021-09-24 14:03 ` [PATCH 5.4 00/50] 5.4.149-rc1 review Daniel Díaz
2021-09-24 17:59 ` Jon Hunter
2021-09-24 21:53 ` Shuah Khan
2021-09-24 22:03 ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210924124333.902689505@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mtwget@gmail.com \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).