[PATCH 5.10 000/130] 5.10.84-rc1 review

[PATCH 5.10 000/130] 5.10.84-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.10.84 release.
There are 130 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.10.84-rc1

Wei Yongjun <weiyongjun1@huawei.com>
    ipmi: msghandler: Make symbol 'remove_work_wq' static

Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
    net/tls: Fix authentication failure in CCM mode

Helge Deller <deller@gmx.de>
    parisc: Mark cr16 CPU clocksource unstable on all SMP machines

Mordechay Goodstein <mordechay.goodstein@intel.com>
    iwlwifi: mvm: retry init flow if failed

Lukas Wunner <lukas@wunner.de>
    serial: 8250: Fix RTS modem control while in rs485 mode

Jay Dolan <jay.dolan@accesio.com>
    serial: 8250_pci: rewrite pericom_do_set_divisor()

Jay Dolan <jay.dolan@accesio.com>
    serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array

Johan Hovold <johan@kernel.org>
    serial: core: fix transmit-buffer reset and memleak

Patrik John <patrik.john@u-blox.com>
    serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30

Pierre Gondois <Pierre.Gondois@arm.com>
    serial: pl011: Add ACPI SBSA UART match id

Sven Eckelmann <sven@narfation.org>
    tty: serial: msm_serial: Deactivate RX DMA for polling support

Joerg Roedel <jroedel@suse.de>
    x86/64/mm: Map all kernel memory into trampoline_pgd

Feng Tang <feng.tang@intel.com>
    x86/tsc: Disable clocksource watchdog for TSC on qualified platorms

Feng Tang <feng.tang@intel.com>
    x86/tsc: Add a timer to make sure TSC_adjust is always checked

Badhri Jagan Sridharan <badhri@google.com>
    usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect

Ole Ernst <olebowle@gmx.com>
    USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Fix commad ring abort, write all 64 bits to CRCR register.

Maciej W. Rozycki <macro@orcam.me.uk>
    vgacon: Propagate console boot parameters before calling `vc_resize'

Helge Deller <deller@gmx.de>
    parisc: Fix "make install" on newer debian releases

Helge Deller <deller@gmx.de>
    parisc: Fix KBUILD_IMAGE for self-extracting kernel

Lai Jiangshan <laijs@linux.alibaba.com>
    x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()

Juergen Gross <jgross@suse.com>
    x86/pv: Switch SWAPGS to ALTERNATIVE

Qais Yousef <qais.yousef@arm.com>
    sched/uclamp: Fix rq->uclamp_max not set on first enqueue

Lai Jiangshan <laijs@linux.alibaba.com>
    x86/xen: Add xenpv_restore_regs_and_return_to_usermode()

Lai Jiangshan <laijs@linux.alibaba.com>
    x86/entry: Use the correct fence macro after swapgs in kernel CR3

Michael Sterritt <sterritt@google.com>
    x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword

Dan Carpenter <dan.carpenter@oracle.com>
    KVM: VMX: Set failure code in prepare_vmcs02()

Like Xu <likexu@tencent.com>
    KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register

Sameer Saurabh <ssaurabh@marvell.com>
    atlantic: Remove warn trace message.

Dmitry Bogdanov <dbezrukov@marvell.com>
    atlantic: Fix statistics logic for production hardware

Sameer Saurabh <ssaurabh@marvell.com>
    Remove Half duplex mode speed capabilities.

Nikita Danilov <ndanilov@aquantia.com>
    atlantic: Add missing DIDs and fix 115c.

Sameer Saurabh <ssaurabh@marvell.com>
    atlantic: Fix to display FW bundle version instead of FW mac version.

Nikita Danilov <ndanilov@aquantia.com>
    atlatnic: enable Nbase-t speeds with base-t

Dmitry Bogdanov <dbezrukov@marvell.com>
    atlantic: Increase delay for fw transactions

Rob Clark <robdclark@chromium.org>
    drm/msm: Do hw_init() before capturing GPU state

Douglas Anderson <dianders@chromium.org>
    drm/msm/a6xx: Allocate enough space for GMU registers

Tony Lu <tonylu@linux.alibaba.com>
    net/smc: Keep smc_close_final rc during active close

William Kucharski <william.kucharski@oracle.com>
    net/rds: correct socket tunable error in rds_tcp_tune()

Dust Li <dust.li@linux.alibaba.com>
    net/smc: fix wrong list_del in smc_lgr_cleanup_early

Eric Dumazet <edumazet@google.com>
    ipv4: convert fib_num_tclassid_users to atomic_t

Eric Dumazet <edumazet@google.com>
    net: annotate data-races on txq->xmit_lock_owner

Dongliang Mu <mudongliangabcd@gmail.com>
    dpaa2-eth: destroy workqueue at the end of remove function

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: marvell: mvpp2: Fix the computation of shared CPUs

Sven Schuchmann <schuchmann@schleissheimer.de>
    net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available

Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
    ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec

Eiichi Tsukata <eiichi.tsukata@nutanix.com>
    rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()

Eiichi Tsukata <eiichi.tsukata@nutanix.com>
    rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle()

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix kcontrol put callback in AHUB

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix kcontrol put callback in DSPK

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix kcontrol put callback in DMIC

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix kcontrol put callback in I2S

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix kcontrol put callback in ADMAIF

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix wrong value type in DSPK

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix wrong value type in DMIC

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix wrong value type in I2S

Sameer Pujar <spujar@nvidia.com>
    ASoC: tegra: Fix wrong value type in ADMAIF

Lorenzo Bianconi <lorenzo@kernel.org>
    mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode

Li Zhijian <lizhijian@cn.fujitsu.com>
    selftests: net: Correct case name

Zhou Qingyang <zhou1615@umn.edu>
    net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()

Mark Rutland <mark.rutland@arm.com>
    arm64: ftrace: add missing BTIs

Arnd Bergmann <arnd@arndb.de>
    siphash: use _unaligned version by default

Benjamin Poirier <bpoirier@nvidia.com>
    net: mpls: Fix notifications when deleting a device

Zhou Qingyang <zhou1615@umn.edu>
    net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()

Paolo Abeni <pabeni@redhat.com>
    tcp: fix page frag corruption on page fault

Randy Dunlap <rdunlap@infradead.org>
    natsemi: xtensa: fix section mismatch warnings

Aaro Koskinen <aaro.koskinen@iki.fi>
    i2c: cbus-gpio: set atomic transfer callback

Alain Volmat <alain.volmat@foss.st.com>
    i2c: stm32f7: stop dma transfer in case of NACK

Alain Volmat <alain.volmat@foss.st.com>
    i2c: stm32f7: recover the bus on access timeout

Alain Volmat <alain.volmat@foss.st.com>
    i2c: stm32f7: flush TX FIFO upon transfer errors

Gustavo A. R. Silva <gustavoars@kernel.org>
    wireguard: ratelimiter: use kvcalloc() instead of kvzalloc()

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: receive: drop handshakes if queue lock is contended

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: receive: use ring buffer for incoming handshakes

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: device: reset peer src endpoint when netns exits

Li Zhijian <lizhijian@cn.fujitsu.com>
    wireguard: selftests: rename DEBUG_PI_LIST to DEBUG_PLIST

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: selftests: actually test for routing loops

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: allowedips: add missing __rcu annotation to satisfy sparse

Jason A. Donenfeld <Jason@zx2c4.com>
    wireguard: selftests: increase default dmesg log size

Yifan Zhang <yifan1.zhang@amd.com>
    drm/amdkfd: fix boot failure when iommu is disabled in Picasso.

Yifan Zhang <yifan1.zhang@amd.com>
    drm/amdgpu: init iommu after amdkfd device init

James Zhu <James.Zhu@amd.com>
    drm/amdgpu: move iommu_resume before ip init/resume

James Zhu <James.Zhu@amd.com>
    drm/amdgpu: add amdgpu_amdkfd_resume_iommu

James Zhu <James.Zhu@amd.com>
    drm/amdkfd: separate kfd_iommu_resume from kfd_resume

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing/histograms: String compares should not care about signed values

Lai Jiangshan <laijs@linux.alibaba.com>
    KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()

Catalin Marinas <catalin.marinas@arm.com>
    KVM: arm64: Avoid setting the upper 32 bits of TCR_EL2 and CPTR_EL2 to 1

Paolo Bonzini <pbonzini@redhat.com>
    KVM: x86: Use a stable condition around all VT-d PI paths

Sean Christopherson <seanjc@google.com>
    KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST

Sean Christopherson <seanjc@google.com>
    KVM: Disallow user memslot with size that exceeds "unsigned long"

Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
    drm/amd/display: Allow DSC on supported MST branch devices

msizanoen1 <msizanoen@qtmlabs.xyz>
    ipv6: fix memory leak in fib6_rule_suppress

Baokun Li <libaokun1@huawei.com>
    sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl

Baokun Li <libaokun1@huawei.com>
    sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl

Linus Torvalds <torvalds@linux-foundation.org>
    fget: check that the fd still exists after getting a ref to it

Niklas Schnelle <schnelle@linux.ibm.com>
    s390/pci: move pseudo-MMIO to prevent MIO overlap

Xiongfeng Wang <wangxiongfeng2@huawei.com>
    cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()

Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
    ipmi: Move remove_work to dedicated workqueue

Stanislaw Gruszka <stf_xl@wp.pl>
    rt2x00: do not mark device gone on EPROTO errors during start

Masami Hiramatsu <mhiramat@kernel.org>
    kprobes: Limit max data_size of the kretprobe instances

Stephen Suryaputra <ssuryaextr@gmail.com>
    vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit

Mario Limonciello <mario.limonciello@amd.com>
    ACPI: Add stubs for wakeup handler functions

Wen Gu <guwen@linux.alibaba.com>
    net/smc: Avoid warning of possible recursive locking

Ian Rogers <irogers@google.com>
    perf report: Fix memory leaks around perf_tip()

Ian Rogers <irogers@google.com>
    perf hist: Fix memory leak of a perf_hpp_fmt

German Gomez <german.gomez@arm.com>
    perf inject: Fix ARM SPE handling

Teng Qi <starmiku1207184332@gmail.com>
    net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()

zhangyue <zhangyue1@kylinos.cn>
    net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound

Jordy Zomer <jordy@pwning.systems>
    ipv6: check return value of ipv6_skip_exthdr

Teng Qi <starmiku1207184332@gmail.com>
    ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()

Mario Limonciello <mario.limonciello@amd.com>
    ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile

Bernard Zhao <bernard@vivo.com>
    drm/amd/amdgpu: fix potential memleak

shaoyunl <shaoyun.liu@amd.com>
    drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again

Mike Christie <michael.christie@oracle.com>
    scsi: iscsi: Unblock session then wake up error handler

Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
    thermal: core: Reset previous low and high trip during thermal zone init

Wang Yugui <wangyugui@e16-tech.com>
    btrfs: check-integrity: fix a warning on write caching disabled disk

Vasily Gorbik <gor@linux.ibm.com>
    s390/setup: avoid using memblock_enforce_memory_limit

Slark Xiao <slark_xiao@163.com>
    platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep

Jimmy Wang <jimmy221b@163.com>
    platform/x86: thinkpad_acpi: Add support for dual fan control

liuguoqiang <liuguoqiang@uniontech.com>
    net: return correct error code

Zekun Shen <bruceshenzk@gmail.com>
    atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_wait

Wen Gu <guwen@linux.alibaba.com>
    net/smc: Transfer remaining wait queue entries during fallback

Xing Song <xing.song@mediatek.com>
    mac80211: do not access the IV when it was stripped

Julian Braha <julianbraha@gmail.com>
    drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

Alexey Kardashevskiy <aik@ozlabs.ru>
    powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"

Andreas Gruenbacher <agruenba@redhat.com>
    gfs2: Fix length of holes reported at end-of-file

Bob Peterson <rpeterso@redhat.com>
    gfs2: release iopen glock early in evict

Miklos Szeredi <mszeredi@redhat.com>
    ovl: fix deadlock in splice write

Miklos Szeredi <mszeredi@redhat.com>
    ovl: simplify file splice

Zhang Changzhong <zhangchangzhong@huawei.com>
    can: j1939: j1939_tp_cmd_recv(): check the dst address of TP.CM_BAM

Benjamin Coddington <bcodding@redhat.com>
    NFSv42: Fix pagecache invalidation after COPY/CLONE


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm64/include/asm/kvm_arm.h                   |   4 +-
 arch/arm64/kernel/entry-ftrace.S                   |   6 +
 arch/parisc/Makefile                               |   5 +
 arch/parisc/install.sh                             |   1 +
 arch/parisc/kernel/time.c                          |  24 +-
 arch/powerpc/platforms/pseries/iommu.c             |   9 -
 arch/s390/include/asm/pci_io.h                     |   7 +-
 arch/s390/kernel/setup.c                           |   3 -
 arch/x86/entry/entry_64.S                          |  45 ++--
 arch/x86/include/asm/irqflags.h                    |  20 +-
 arch/x86/include/asm/paravirt.h                    |  20 --
 arch/x86/include/asm/paravirt_types.h              |   2 -
 arch/x86/kernel/asm-offsets_64.c                   |   1 -
 arch/x86/kernel/paravirt.c                         |   1 -
 arch/x86/kernel/paravirt_patch.c                   |   3 -
 arch/x86/kernel/sev-es.c                           |  57 ++--
 arch/x86/kernel/tsc.c                              |  28 +-
 arch/x86/kernel/tsc_sync.c                         |  41 +++
 arch/x86/kvm/mmu/mmu.c                             |   2 +-
 arch/x86/kvm/svm/pmu.c                             |   2 +-
 arch/x86/kvm/vmx/nested.c                          |   4 +-
 arch/x86/kvm/vmx/posted_intr.c                     |  20 +-
 arch/x86/kvm/vmx/vmx.c                             |  23 +-
 arch/x86/realmode/init.c                           |  12 +-
 arch/x86/xen/enlighten_pv.c                        |   3 -
 arch/x86/xen/xen-asm.S                             |  20 ++
 drivers/ata/ahci.c                                 |   1 +
 drivers/ata/sata_fsl.c                             |  20 +-
 drivers/char/ipmi/ipmi_msghandler.c                |  13 +-
 drivers/cpufreq/cpufreq.c                          |   9 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c         |  10 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h         |   2 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         |   8 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c           |   1 +
 drivers/gpu/drm/amd/amdkfd/kfd_device.c            |  15 +-
 .../gpu/drm/amd/amdkfd/kfd_device_queue_manager.c  |   5 +
 .../amd/display/amdgpu_dm/amdgpu_dm_mst_types.c    |  20 +-
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c        |   4 +-
 drivers/gpu/drm/msm/msm_debugfs.c                  |   1 +
 drivers/gpu/drm/sun4i/Kconfig                      |   1 +
 drivers/i2c/busses/i2c-cbus-gpio.c                 |   5 +-
 drivers/i2c/busses/i2c-stm32f7.c                   |  31 ++-
 drivers/net/ethernet/aquantia/atlantic/aq_common.h |  27 +-
 drivers/net/ethernet/aquantia/atlantic/aq_hw.h     |   2 +
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c    |  10 +-
 .../net/ethernet/aquantia/atlantic/aq_pci_func.c   |   7 +-
 drivers/net/ethernet/aquantia/atlantic/aq_vec.c    |   3 -
 .../aquantia/atlantic/hw_atl/hw_atl_utils.c        |  25 +-
 .../aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c   |   3 -
 .../ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c   |  22 +-
 .../ethernet/aquantia/atlantic/hw_atl2/hw_atl2.h   |   2 +
 .../aquantia/atlantic/hw_atl2/hw_atl2_utils.h      |  38 ++-
 .../aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c   | 110 ++++++--
 drivers/net/ethernet/dec/tulip/de4x5.c             |  34 ++-
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c   |   2 +
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c |   4 +
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c    |   2 +-
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c     |   9 +-
 drivers/net/ethernet/natsemi/xtsonic.c             |   2 +-
 .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c    |  10 +-
 drivers/net/usb/lan78xx.c                          |   2 +-
 drivers/net/vrf.c                                  |   2 +
 drivers/net/wireguard/allowedips.c                 |   2 +-
 drivers/net/wireguard/device.c                     |  39 +--
 drivers/net/wireguard/device.h                     |   9 +-
 drivers/net/wireguard/queueing.c                   |   6 +-
 drivers/net/wireguard/queueing.h                   |   2 +-
 drivers/net/wireguard/ratelimiter.c                |   4 +-
 drivers/net/wireguard/receive.c                    |  39 +--
 drivers/net/wireguard/socket.c                     |   2 +-
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c       |  22 +-
 drivers/net/wireless/intel/iwlwifi/iwl-drv.h       |   3 +
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c  |  24 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h       |   3 +
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   3 +
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c    |   4 +-
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c     |   3 +
 drivers/platform/x86/thinkpad_acpi.c               |  13 +-
 drivers/scsi/scsi_transport_iscsi.c                |   6 +-
 drivers/thermal/thermal_core.c                     |   2 +
 drivers/tty/serial/8250/8250_pci.c                 |  39 ++-
 drivers/tty/serial/8250/8250_port.c                |   7 -
 drivers/tty/serial/amba-pl011.c                    |   1 +
 drivers/tty/serial/msm_serial.c                    |   3 +
 drivers/tty/serial/serial-tegra.c                  |   4 +-
 drivers/tty/serial/serial_core.c                   |  18 +-
 drivers/usb/core/quirks.c                          |   3 +
 drivers/usb/host/xhci-ring.c                       |  21 +-
 drivers/usb/typec/tcpm/tcpm.c                      |   4 -
 drivers/video/console/vgacon.c                     |  14 +-
 fs/btrfs/disk-io.c                                 |  14 +-
 fs/file.c                                          |   4 +
 fs/gfs2/bmap.c                                     |   2 +-
 fs/gfs2/super.c                                    |  14 +-
 fs/nfs/nfs42proc.c                                 |   5 +-
 fs/overlayfs/file.c                                |  59 ++--
 include/linux/acpi.h                               |   9 +
 include/linux/kprobes.h                            |   2 +
 include/linux/netdevice.h                          |  19 +-
 include/linux/siphash.h                            |  14 +-
 include/net/dst_cache.h                            |  11 +
 include/net/fib_rules.h                            |   4 +-
 include/net/ip_fib.h                               |   2 +-
 include/net/netns/ipv4.h                           |   2 +-
 include/net/sock.h                                 |  13 +-
 kernel/kprobes.c                                   |   3 +
 kernel/sched/core.c                                |   2 +-
 kernel/trace/trace_events_hist.c                   |   2 +-
 lib/siphash.c                                      |  12 +-
 net/can/j1939/transport.c                          |   6 +
 net/core/dev.c                                     |   5 +-
 net/core/dst_cache.c                               |  19 ++
 net/core/fib_rules.c                               |   2 +-
 net/ipv4/devinet.c                                 |   2 +-
 net/ipv4/fib_frontend.c                            |   2 +-
 net/ipv4/fib_rules.c                               |   5 +-
 net/ipv4/fib_semantics.c                           |   4 +-
 net/ipv6/esp6.c                                    |   6 +
 net/ipv6/fib6_rules.c                              |   4 +-
 net/mac80211/rx.c                                  |   3 +-
 net/mpls/af_mpls.c                                 |  68 +++--
 net/rds/tcp.c                                      |   2 +-
 net/rxrpc/conn_client.c                            |  14 +-
 net/rxrpc/peer_object.c                            |  14 +-
 net/smc/af_smc.c                                   |  14 +
 net/smc/smc_close.c                                |   8 +-
 net/smc/smc_core.c                                 |   7 +-
 net/tls/tls_sw.c                                   |   4 +-
 sound/hda/intel-dsp-config.c                       |  10 +
 sound/soc/tegra/tegra186_dspk.c                    | 181 ++++++++++---
 sound/soc/tegra/tegra210_admaif.c                  | 140 +++++++---
 sound/soc/tegra/tegra210_ahub.c                    |  11 +-
 sound/soc/tegra/tegra210_dmic.c                    | 184 ++++++++++---
 sound/soc/tegra/tegra210_i2s.c                     | 296 ++++++++++++++++-----
 tools/perf/builtin-report.c                        |  15 +-
 tools/perf/ui/hist.c                               |  28 +-
 tools/perf/util/arm-spe.c                          |  15 ++
 tools/perf/util/hist.h                             |   1 -
 tools/perf/util/util.c                             |  14 +-
 tools/perf/util/util.h                             |   2 +-
 tools/testing/selftests/net/fcnal-test.sh          |   4 +-
 tools/testing/selftests/wireguard/netns.sh         |  30 ++-
 .../testing/selftests/wireguard/qemu/debug.config  |   2 +-
 .../testing/selftests/wireguard/qemu/kernel.config |   1 +
 virt/kvm/kvm_main.c                                |   3 +-
 146 files changed, 1760 insertions(+), 688 deletions(-)

[PATCH 5.10 001/130] NFSv42: Fix pagecache invalidation after COPY/CLONE

[Greg Kroah-Hartman]

From: Benjamin Coddington <bcodding@redhat.com>

commit 3f015d89a47cd8855cd92f71fff770095bd885a1 upstream.

The mechanism in use to allow the client to see the results of COPY/CLONE
is to drop those pages from the pagecache.  This forces the client to read
those pages once more from the server.  However, truncate_pagecache_range()
zeros out partial pages instead of dropping them.  Let us instead use
invalidate_inode_pages2_range() with full-page offsets to ensure the client
properly sees the results of COPY/CLONE operations.

Cc: <stable@vger.kernel.org> # v4.7+
Fixes: 2e72448b07dc ("NFS: Add COPY nfs operation")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs42proc.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs42proc.c
+++ b/fs/nfs/nfs42proc.c
@@ -362,8 +362,9 @@ static ssize_t _nfs42_proc_copy(struct f
 			goto out;
 	}
 
-	truncate_pagecache_range(dst_inode, pos_dst,
-				 pos_dst + res->write_res.count);
+	WARN_ON_ONCE(invalidate_inode_pages2_range(dst_inode->i_mapping,
+					pos_dst >> PAGE_SHIFT,
+					(pos_dst + res->write_res.count - 1) >> PAGE_SHIFT));
 	spin_lock(&dst_inode->i_lock);
 	NFS_I(dst_inode)->cache_validity |= (NFS_INO_REVAL_PAGECACHE |
 			NFS_INO_REVAL_FORCED | NFS_INO_INVALID_SIZE |

[PATCH 5.10 002/130] can: j1939: j1939_tp_cmd_recv(): check the dst address of TP.CM_BAM

[Greg Kroah-Hartman]

From: Zhang Changzhong <zhangchangzhong@huawei.com>

commit 164051a6ab5445bd97f719f50b16db8b32174269 upstream.

The TP.CM_BAM message must be sent to the global address [1], so add a
check to drop TP.CM_BAM sent to a non-global address.

Without this patch, the receiver will treat the following packets as
normal RTS/CTS transport:
18EC0102#20090002FF002301
18EB0102#0100000000000000
18EB0102#020000FFFFFFFFFF

[1] SAE-J1939-82 2015 A.3.3 Row 1.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/all/1635431907-15617-4-git-send-email-zhangchangzhong@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/can/j1939/transport.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -2004,6 +2004,12 @@ static void j1939_tp_cmd_recv(struct j19
 		extd = J1939_ETP;
 		fallthrough;
 	case J1939_TP_CMD_BAM:
+		if (cmd == J1939_TP_CMD_BAM && !j1939_cb_is_broadcast(skcb)) {
+			netdev_err_once(priv->ndev, "%s: BAM to unicast (%02x), ignoring!\n",
+					__func__, skcb->addr.sa);
+			return;
+		}
+		fallthrough;
 	case J1939_TP_CMD_RTS: /* fall through */
 		if (skcb->addr.type != extd)
 			return;

[PATCH 5.10 003/130] ovl: simplify file splice

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 82a763e61e2b601309d696d4fa514c77d64ee1be upstream.

generic_file_splice_read() and iter_file_splice_write() will call back into
f_op->iter_read() and f_op->iter_write() respectively.  These already do
the real file lookup and cred override.  So the code in ovl_splice_read()
and ovl_splice_write() is redundant.

In addition the ovl_file_accessed() call in ovl_splice_write() is
incorrect, though probably harmless.

Fix by calling generic_file_splice_read() and iter_file_splice_write()
directly.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Stan Hu <stanhu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/overlayfs/file.c |   46 ++--------------------------------------------
 1 file changed, 2 insertions(+), 44 deletions(-)

--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -422,48 +422,6 @@ out_unlock:
 	return ret;
 }
 
-static ssize_t ovl_splice_read(struct file *in, loff_t *ppos,
-			 struct pipe_inode_info *pipe, size_t len,
-			 unsigned int flags)
-{
-	ssize_t ret;
-	struct fd real;
-	const struct cred *old_cred;
-
-	ret = ovl_real_fdget(in, &real);
-	if (ret)
-		return ret;
-
-	old_cred = ovl_override_creds(file_inode(in)->i_sb);
-	ret = generic_file_splice_read(real.file, ppos, pipe, len, flags);
-	revert_creds(old_cred);
-
-	ovl_file_accessed(in);
-	fdput(real);
-	return ret;
-}
-
-static ssize_t
-ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
-			  loff_t *ppos, size_t len, unsigned int flags)
-{
-	struct fd real;
-	const struct cred *old_cred;
-	ssize_t ret;
-
-	ret = ovl_real_fdget(out, &real);
-	if (ret)
-		return ret;
-
-	old_cred = ovl_override_creds(file_inode(out)->i_sb);
-	ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
-	revert_creds(old_cred);
-
-	ovl_file_accessed(out);
-	fdput(real);
-	return ret;
-}
-
 static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
 	struct fd real;
@@ -772,8 +730,8 @@ const struct file_operations ovl_file_op
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= ovl_compat_ioctl,
 #endif
-	.splice_read    = ovl_splice_read,
-	.splice_write   = ovl_splice_write,
+	.splice_read    = generic_file_splice_read,
+	.splice_write   = iter_file_splice_write,
 
 	.copy_file_range	= ovl_copy_file_range,
 	.remap_file_range	= ovl_remap_file_range,

[PATCH 5.10 004/130] ovl: fix deadlock in splice write

[Greg Kroah-Hartman]

From: Miklos Szeredi <mszeredi@redhat.com>

commit 9b91b6b019fda817eb52f728eb9c79b3579760bc upstream.

There's possibility of an ABBA deadlock in case of a splice write to an
overlayfs file and a concurrent splice write to a corresponding real file.

The call chain for splice to an overlay file:

 -> do_splice                     [takes sb_writers on overlay file]
   -> do_splice_from
     -> iter_file_splice_write    [takes pipe->mutex]
       -> vfs_iter_write
         ...
         -> ovl_write_iter        [takes sb_writers on real file]

And the call chain for splice to a real file:

 -> do_splice                     [takes sb_writers on real file]
   -> do_splice_from
     -> iter_file_splice_write    [takes pipe->mutex]

Syzbot successfully bisected this to commit 82a763e61e2b ("ovl: simplify
file splice").

Fix by reverting the write part of the above commit and by adding missing
bits from ovl_write_iter() into ovl_splice_write().

Fixes: 82a763e61e2b ("ovl: simplify file splice")
Reported-and-tested-by: syzbot+579885d1a9a833336209@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Stan Hu <stanhu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/overlayfs/file.c |   47 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

--- a/fs/overlayfs/file.c
+++ b/fs/overlayfs/file.c
@@ -422,6 +422,51 @@ out_unlock:
 	return ret;
 }
 
+/*
+ * Calling iter_file_splice_write() directly from overlay's f_op may deadlock
+ * due to lock order inversion between pipe->mutex in iter_file_splice_write()
+ * and file_start_write(real.file) in ovl_write_iter().
+ *
+ * So do everything ovl_write_iter() does and call iter_file_splice_write() on
+ * the real file.
+ */
+static ssize_t ovl_splice_write(struct pipe_inode_info *pipe, struct file *out,
+				loff_t *ppos, size_t len, unsigned int flags)
+{
+	struct fd real;
+	const struct cred *old_cred;
+	struct inode *inode = file_inode(out);
+	struct inode *realinode = ovl_inode_real(inode);
+	ssize_t ret;
+
+	inode_lock(inode);
+	/* Update mode */
+	ovl_copyattr(realinode, inode);
+	ret = file_remove_privs(out);
+	if (ret)
+		goto out_unlock;
+
+	ret = ovl_real_fdget(out, &real);
+	if (ret)
+		goto out_unlock;
+
+	old_cred = ovl_override_creds(inode->i_sb);
+	file_start_write(real.file);
+
+	ret = iter_file_splice_write(pipe, real.file, ppos, len, flags);
+
+	file_end_write(real.file);
+	/* Update size */
+	ovl_copyattr(realinode, inode);
+	revert_creds(old_cred);
+	fdput(real);
+
+out_unlock:
+	inode_unlock(inode);
+
+	return ret;
+}
+
 static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
 {
 	struct fd real;
@@ -731,7 +776,7 @@ const struct file_operations ovl_file_op
 	.compat_ioctl	= ovl_compat_ioctl,
 #endif
 	.splice_read    = generic_file_splice_read,
-	.splice_write   = iter_file_splice_write,
+	.splice_write   = ovl_splice_write,
 
 	.copy_file_range	= ovl_copy_file_range,
 	.remap_file_range	= ovl_remap_file_range,

[PATCH 5.10 005/130] gfs2: release iopen glock early in evict

[Greg Kroah-Hartman]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 49462e2be119d38c5eb5759d0d1b712df3a41239 ]

Before this patch, evict would clear the iopen glock's gl_object after
releasing the inode glock.  In the meantime, another process could reuse
the same block and thus glocks for a new inode.  It would lock the inode
glock (exclusively), and then the iopen glock (shared).  The shared
locking mode doesn't provide any ordering against the evict, so by the
time the iopen glock is reused, evict may not have gotten to setting
gl_object to NULL.

Fix that by releasing the iopen glock before the inode glock in
gfs2_evict_inode.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>gl_object
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/super.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 6a355e1347d7f..d2b7ecbd1b150 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1438,13 +1438,6 @@ static void gfs2_evict_inode(struct inode *inode)
 	gfs2_ordered_del_inode(ip);
 	clear_inode(inode);
 	gfs2_dir_hash_inval(ip);
-	if (ip->i_gl) {
-		glock_clear_object(ip->i_gl, ip);
-		wait_on_bit_io(&ip->i_flags, GIF_GLOP_PENDING, TASK_UNINTERRUPTIBLE);
-		gfs2_glock_add_to_lru(ip->i_gl);
-		gfs2_glock_put_eventually(ip->i_gl);
-		ip->i_gl = NULL;
-	}
 	if (gfs2_holder_initialized(&ip->i_iopen_gh)) {
 		struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
 
@@ -1457,6 +1450,13 @@ static void gfs2_evict_inode(struct inode *inode)
 		gfs2_holder_uninit(&ip->i_iopen_gh);
 		gfs2_glock_put_eventually(gl);
 	}
+	if (ip->i_gl) {
+		glock_clear_object(ip->i_gl, ip);
+		wait_on_bit_io(&ip->i_flags, GIF_GLOP_PENDING, TASK_UNINTERRUPTIBLE);
+		gfs2_glock_add_to_lru(ip->i_gl);
+		gfs2_glock_put_eventually(ip->i_gl);
+		ip->i_gl = NULL;
+	}
 }
 
 static struct inode *gfs2_alloc_inode(struct super_block *sb)
-- 
2.33.0

[PATCH 5.10 006/130] gfs2: Fix length of holes reported at end-of-file

[Greg Kroah-Hartman]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit f3506eee81d1f700d9ee2d2f4a88fddb669ec032 ]

Fix the length of holes reported at the end of a file: the length is
relative to the beginning of the extent, not the seek position which is
rounded down to the filesystem block size.

This bug went unnoticed for some time, but is now caught by the
following assertion in iomap_iter_done():

  WARN_ON_ONCE(iter->iomap.offset + iter->iomap.length <= iter->pos)

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/bmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index a1f9dde33058f..b34c02985d9d2 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -940,7 +940,7 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length,
 		else if (height == ip->i_height)
 			ret = gfs2_hole_size(inode, lblock, len, mp, iomap);
 		else
-			iomap->length = size - pos;
+			iomap->length = size - iomap->offset;
 	} else if (flags & IOMAP_WRITE) {
 		u64 alloc_size;
 
-- 
2.33.0

[PATCH 5.10 007/130] powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"

[Greg Kroah-Hartman]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit 2d33f5504490a9d90924476dbccd4a5349ee1ad0 ]

This reverts commit 54fc3c681ded9437e4548e2501dc1136b23cfa9a
which does not allow 1:1 mapping even for the system RAM which
is usually possible.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211108040320.3857636-2-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/iommu.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index e4198700ed1a3..245f1f8df6563 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -1034,15 +1034,6 @@ static phys_addr_t ddw_memory_hotplug_max(void)
 	phys_addr_t max_addr = memory_hotplug_max();
 	struct device_node *memory;
 
-	/*
-	 * The "ibm,pmemory" can appear anywhere in the address space.
-	 * Assuming it is still backed by page structs, set the upper limit
-	 * for the huge DMA window as MAX_PHYSMEM_BITS.
-	 */
-	if (of_find_node_by_type(NULL, "ibm,pmemory"))
-		return (sizeof(phys_addr_t) * 8 <= MAX_PHYSMEM_BITS) ?
-			(phys_addr_t) -1 : (1ULL << MAX_PHYSMEM_BITS);
-
 	for_each_node_by_type(memory, "memory") {
 		unsigned long start, size;
 		int n_mem_addr_cells, n_mem_size_cells, len;
-- 
2.33.0

[PATCH 5.10 008/130] drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

[Greg Kroah-Hartman]

From: Julian Braha <julianbraha@gmail.com>

[ Upstream commit bb162bb2b4394108c8f055d1b115735331205e28 ]

When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
  Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n]
  Selected by [y]:
  - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY
without selecting or depending on RESET_CONTROLLER, despite
PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

v2:
Fixed indentation to match the rest of the file.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 5755f0432e774..8c796de53222c 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -46,6 +46,7 @@ config DRM_SUN6I_DSI
 	default MACH_SUN8I
 	select CRC_CCITT
 	select DRM_MIPI_DSI
+	select RESET_CONTROLLER
 	select PHY_SUN6I_MIPI_DPHY
 	help
 	  Choose this option if you want have an Allwinner SoC with
-- 
2.33.0

[PATCH 5.10 009/130] mac80211: do not access the IV when it was stripped

[Greg Kroah-Hartman]

From: Xing Song <xing.song@mediatek.com>

[ Upstream commit 77dfc2bc0bb4b8376ecd7a430f27a4a8fff6a5a0 ]

ieee80211_get_keyid() will return false value if IV has been stripped,
such as return 0 for IP/ARP frames due to LLC header, and return -EINVAL
for disassociation frames due to its length... etc. Don't try to access
it if it's not present.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Link: https://lore.kernel.org/r/20211101024657.143026-1-xing.song@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index b7979c0bffd0f..6a24431b90095 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1945,7 +1945,8 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 		int keyid = rx->sta->ptk_idx;
 		sta_ptk = rcu_dereference(rx->sta->ptk[keyid]);
 
-		if (ieee80211_has_protected(fc)) {
+		if (ieee80211_has_protected(fc) &&
+		    !(status->flag & RX_FLAG_IV_STRIPPED)) {
 			cs = rx->sta->cipher_scheme;
 			keyid = ieee80211_get_keyid(rx->skb, cs);
 
-- 
2.33.0

[PATCH 5.10 010/130] net/smc: Transfer remaining wait queue entries during fallback

[Greg Kroah-Hartman]

From: Wen Gu <guwen@linux.alibaba.com>

[ Upstream commit 2153bd1e3d3dbf6a3403572084ef6ed31c53c5f0 ]

The SMC fallback is incomplete currently. There may be some
wait queue entries remaining in smc socket->wq, which should
be removed to clcsocket->wq during the fallback.

For example, in nginx/wrk benchmark, this issue causes an
all-zeros test result:

server: nginx -g 'daemon off;'
client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html

  Running 5s test @ http://11.200.15.93/index.html
     1 threads and 1 connections
     Thread Stats   Avg      Stdev     Max   ± Stdev
     	Latency     0.00us    0.00us   0.00us    -nan%
	Req/Sec     0.00      0.00     0.00      -nan%
	0 requests in 5.00s, 0.00B read
     Requests/sec:      0.00
     Transfer/sec:       0.00B

The reason for this all-zeros result is that when wrk used SMC
to replace TCP, it added an eppoll_entry into smc socket->wq
and expected to be notified if epoll events like EPOLL_IN/
EPOLL_OUT occurred on the smc socket.

However, once a fallback occurred, wrk switches to use clcsocket.
Now it is clcsocket->wq instead of smc socket->wq which will
be woken up. The eppoll_entry remaining in smc socket->wq does
not work anymore and wrk stops the test.

This patch fixes this issue by removing remaining wait queue
entries from smc socket->wq to clcsocket->wq during the fallback.

Link: https://www.spinics.net/lists/netdev/msg779769.html
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index ac8265e35b2d2..04bf8088872a9 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -513,12 +513,26 @@ static void smc_link_save_peer_info(struct smc_link *link,
 
 static void smc_switch_to_fallback(struct smc_sock *smc)
 {
+	wait_queue_head_t *smc_wait = sk_sleep(&smc->sk);
+	wait_queue_head_t *clc_wait = sk_sleep(smc->clcsock->sk);
+	unsigned long flags;
+
 	smc->use_fallback = true;
 	if (smc->sk.sk_socket && smc->sk.sk_socket->file) {
 		smc->clcsock->file = smc->sk.sk_socket->file;
 		smc->clcsock->file->private_data = smc->clcsock;
 		smc->clcsock->wq.fasync_list =
 			smc->sk.sk_socket->wq.fasync_list;
+
+		/* There may be some entries remaining in
+		 * smc socket->wq, which should be removed
+		 * to clcsocket->wq during the fallback.
+		 */
+		spin_lock_irqsave(&smc_wait->lock, flags);
+		spin_lock(&clc_wait->lock);
+		list_splice_init(&smc_wait->head, &clc_wait->head);
+		spin_unlock(&clc_wait->lock);
+		spin_unlock_irqrestore(&smc_wait->lock, flags);
 	}
 }
 
-- 
2.33.0

[PATCH 5.10 011/130] atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_wait

[Greg Kroah-Hartman]

From: Zekun Shen <bruceshenzk@gmail.com>

[ Upstream commit b922f622592af76b57cbc566eaeccda0b31a3496 ]

This bug report shows up when running our research tools. The
reports is SOOB read, but it seems SOOB write is also possible
a few lines below.

In details, fw.len and sw.len are inputs coming from io. A len
over the size of self->rpc triggers SOOB. The patch fixes the
bugs by adding sanity checks.

The bugs are triggerable with compromised/malfunctioning devices.
They are potentially exploitable given they first leak up to
0xffff bytes and able to overwrite the region later.

The patch is tested with QEMU emulater.
This is NOT tested with a real device.

Attached is the log we found by fuzzing.

BUG: KASAN: slab-out-of-bounds in
	hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
Read of size 4 at addr ffff888016260b08 by task modprobe/213
CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
 dump_stack+0x76/0xa0
 print_address_description.constprop.0+0x16/0x200
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 __kasan_report.cold+0x37/0x7c
 ? aq_hw_read_reg_bit+0x60/0x70 [atlantic]
 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 kasan_report+0xe/0x20
 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
 hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic]
 hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic]
 hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic]
 ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic]
 ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic]
 hw_atl_utils_initfw+0x12a/0x1c8 [atlantic]
 aq_nic_ndev_register+0x88/0x650 [atlantic]
 ? aq_nic_ndev_init+0x235/0x3c0 [atlantic]
 aq_pci_probe+0x731/0x9b0 [atlantic]
 ? aq_pci_func_init+0xc0/0xc0 [atlantic]
 local_pci_probe+0xd3/0x160
 pci_device_probe+0x23f/0x3e0

Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c   | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
index 404cbf60d3f2f..da1d185f6d226 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
@@ -559,6 +559,11 @@ int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
 			goto err_exit;
 
 		if (fw.len == 0xFFFFU) {
+			if (sw.len > sizeof(self->rpc)) {
+				printk(KERN_INFO "Invalid sw len: %x\n", sw.len);
+				err = -EINVAL;
+				goto err_exit;
+			}
 			err = hw_atl_utils_fw_rpc_call(self, sw.len);
 			if (err < 0)
 				goto err_exit;
@@ -567,6 +572,11 @@ int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
 
 	if (rpc) {
 		if (fw.len) {
+			if (fw.len > sizeof(self->rpc)) {
+				printk(KERN_INFO "Invalid fw len: %x\n", fw.len);
+				err = -EINVAL;
+				goto err_exit;
+			}
 			err =
 			hw_atl_utils_fw_downld_dwords(self,
 						      self->rpc_addr,
-- 
2.33.0

[PATCH 5.10 012/130] net: return correct error code

[Greg Kroah-Hartman]

From: liuguoqiang <liuguoqiang@uniontech.com>

[ Upstream commit 6def480181f15f6d9ec812bca8cbc62451ba314c ]

When kmemdup called failed and register_net_sysctl return NULL, should
return ENOMEM instead of ENOBUFS

Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/devinet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 7c18597774297..148ef484a66ce 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -2582,7 +2582,7 @@ static int __devinet_sysctl_register(struct net *net, char *dev_name,
 free:
 	kfree(t);
 out:
-	return -ENOBUFS;
+	return -ENOMEM;
 }
 
 static void __devinet_sysctl_unregister(struct net *net,
-- 
2.33.0

[PATCH 5.10 013/130] platform/x86: thinkpad_acpi: Add support for dual fan control

[Greg Kroah-Hartman]

From: Jimmy Wang <jimmy221b@163.com>

[ Upstream commit 1f338954a5fbe21eb22b4223141e31f2a26366d5 ]

   This adds dual fan control for P1 / X1 Extreme Gen4

Signed-off-by: Jimmy Wang <jimmy221b@163.com>
Link: https://lore.kernel.org/r/20211105090528.39677-1-jimmy221b@163.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2a313643e0388..840bbc312aedd 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8805,6 +8805,7 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = {
 	TPACPI_Q_LNV3('N', '2', 'E', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (1st gen) */
 	TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (2nd gen) */
 	TPACPI_Q_LNV3('N', '2', 'V', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (3nd gen) */
+	TPACPI_Q_LNV3('N', '4', '0', TPACPI_FAN_2CTL),	/* P1 / X1 Extreme (4nd gen) */
 	TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL),	/* P15 (1st gen) / P15v (1st gen) */
 	TPACPI_Q_LNV3('N', '3', '2', TPACPI_FAN_2CTL),	/* X1 Carbon (9th gen) */
 };
-- 
2.33.0

[PATCH 5.10 014/130] platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep

[Greg Kroah-Hartman]

From: Slark Xiao <slark_xiao@163.com>

[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
by command 'nmcli r wwan' or 'rfkill list'.

Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  In patch V2, Hans said 'sw_state should be unchanged
after a suspend/resume. It's better to drop the
tpacpi_rfk_update_swstate call all together from the
resume path'.
  And it's confimed by Lenovo that GWAN is no longer
 available from WHL generation because the design does not
 match with current pin control.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/thinkpad_acpi.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 840bbc312aedd..d8d241344d22d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1170,15 +1170,6 @@ static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
 	return status;
 }
 
-/* Query FW and update rfkill sw state for all rfkill switches */
-static void tpacpi_rfk_update_swstate_all(void)
-{
-	unsigned int i;
-
-	for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
-		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
-}
-
 /*
  * Sync the HW-blocking state of all rfkill switches,
  * do notice it causes the rfkill core to schedule uevents
@@ -3121,9 +3112,6 @@ static void tpacpi_send_radiosw_update(void)
 	if (wlsw == TPACPI_RFK_RADIO_OFF)
 		tpacpi_rfk_update_hwblock_state(true);
 
-	/* Sync sw blocking state */
-	tpacpi_rfk_update_swstate_all();
-
 	/* Sync hw blocking state last if it is hw-unblocked */
 	if (wlsw == TPACPI_RFK_RADIO_ON)
 		tpacpi_rfk_update_hwblock_state(false);
-- 
2.33.0

[PATCH 5.10 015/130] s390/setup: avoid using memblock_enforce_memory_limit

[Greg Kroah-Hartman]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ]

There is a difference in how architectures treat "mem=" option. For some
that is an amount of online memory, for s390 and x86 this is the limiting
max address. Some memblock api like memblock_enforce_memory_limit()
take limit argument and explicitly treat it as the size of online memory,
and use __find_max_addr to convert it to an actual max address. Current
s390 usage:

memblock_enforce_memory_limit(memblock_end_of_DRAM());

yields different results depending on presence of memory holes (offline
memory blocks in between online memory). If there are no memory holes
limit == max_addr in memblock_enforce_memory_limit() and it does trim
online memory and reserved memory regions. With memory holes present it
actually does nothing.

Since we already use memblock_remove() explicitly to trim online memory
regions to potential limit (think mem=, kdump, addressing limits, etc.)
drop the usage of memblock_enforce_memory_limit() altogether. Trimming
reserved regions should not be required, since we now use
memblock_set_current_limit() to limit allocations and any explicit memory
reservations above the limit is an actual problem we should not hide.

Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/setup.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5cd9d20af31e9..f9f8721dc5321 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -845,9 +845,6 @@ static void __init setup_memory(void)
 		storage_key_init_range(start, end);
 
 	psw_set_key(PAGE_DEFAULT_KEY);
-
-	/* Only cosmetics */
-	memblock_enforce_memory_limit(memblock_end_of_DRAM());
 }
 
 /*
-- 
2.33.0

[PATCH 5.10 016/130] btrfs: check-integrity: fix a warning on write caching disabled disk

[Greg Kroah-Hartman]

From: Wang Yugui <wangyugui@e16-tech.com>

[ Upstream commit a91cf0ffbc244792e0b3ecf7d0fddb2f344b461f ]

When a disk has write caching disabled, we skip submission of a bio with
flush and sync requests before writing the superblock, since it's not
needed. However when the integrity checker is enabled, this results in
reports that there are metadata blocks referred by a superblock that
were not properly flushed. So don't skip the bio submission only when
the integrity checker is enabled for the sake of simplicity, since this
is a debug tool and not meant for use in non-debug builds.

fstests/btrfs/220 trigger a check-integrity warning like the following
when CONFIG_BTRFS_FS_CHECK_INTEGRITY=y and the disk with WCE=0.

  btrfs: attempt to write superblock which references block M @5242880 (sdb2/5242880/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)!
  ------------[ cut here ]------------
  WARNING: CPU: 28 PID: 843680 at fs/btrfs/check-integrity.c:2196 btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs]
  CPU: 28 PID: 843680 Comm: umount Not tainted 5.15.0-0.rc5.39.el8.x86_64 #1
  Hardware name: Dell Inc. Precision T7610/0NK70N, BIOS A18 09/11/2019
  RIP: 0010:btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs]
  RSP: 0018:ffffb642afb47940 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
  RDX: 00000000ffffffff RSI: ffff8b722fc97d00 RDI: ffff8b722fc97d00
  RBP: ffff8b5601c00000 R08: 0000000000000000 R09: c0000000ffff7fff
  R10: 0000000000000001 R11: ffffb642afb476f8 R12: ffffffffffffffff
  R13: ffffb642afb47974 R14: ffff8b5499254c00 R15: 0000000000000003
  FS:  00007f00a06d4080(0000) GS:ffff8b722fc80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fff5cff5ff0 CR3: 00000001c0c2a006 CR4: 00000000001706e0
  Call Trace:
   btrfsic_process_written_block+0x2f7/0x850 [btrfs]
   __btrfsic_submit_bio.part.19+0x310/0x330 [btrfs]
   ? bio_associate_blkg_from_css+0xa4/0x2c0
   btrfsic_submit_bio+0x18/0x30 [btrfs]
   write_dev_supers+0x81/0x2a0 [btrfs]
   ? find_get_pages_range_tag+0x219/0x280
   ? pagevec_lookup_range_tag+0x24/0x30
   ? __filemap_fdatawait_range+0x6d/0xf0
   ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
   ? find_first_extent_bit+0x9b/0x160 [btrfs]
   ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
   write_all_supers+0x1b3/0xa70 [btrfs]
   ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e
   btrfs_commit_transaction+0x59d/0xac0 [btrfs]
   close_ctree+0x11d/0x339 [btrfs]
   generic_shutdown_super+0x71/0x110
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20 [btrfs]
   deactivate_locked_super+0x31/0x70
   cleanup_mnt+0xb8/0x140
   task_work_run+0x6d/0xb0
   exit_to_user_mode_prepare+0x1f0/0x200
   syscall_exit_to_user_mode+0x12/0x30
   do_syscall_64+0x46/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xae
  RIP: 0033:0x7f009f711dfb
  RSP: 002b:00007fff5cff7928 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
  RAX: 0000000000000000 RBX: 000055b68c6c9970 RCX: 00007f009f711dfb
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055b68c6c9b50
  RBP: 0000000000000000 R08: 000055b68c6ca900 R09: 00007f009f795580
  R10: 0000000000000000 R11: 0000000000000246 R12: 000055b68c6c9b50
  R13: 00007f00a04bf184 R14: 0000000000000000 R15: 00000000ffffffff
  ---[ end trace 2c4b82abcef9eec4 ]---
  S-65536(sdb2/65536/1)
   -->
  M-1064960(sdb2/1064960/1)

Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/disk-io.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 9051bb47cbdd9..bab2091c81683 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3692,11 +3692,23 @@ static void btrfs_end_empty_barrier(struct bio *bio)
  */
 static void write_dev_flush(struct btrfs_device *device)
 {
-	struct request_queue *q = bdev_get_queue(device->bdev);
 	struct bio *bio = device->flush_bio;
 
+#ifndef CONFIG_BTRFS_FS_CHECK_INTEGRITY
+	/*
+	 * When a disk has write caching disabled, we skip submission of a bio
+	 * with flush and sync requests before writing the superblock, since
+	 * it's not needed. However when the integrity checker is enabled, this
+	 * results in reports that there are metadata blocks referred by a
+	 * superblock that were not properly flushed. So don't skip the bio
+	 * submission only when the integrity checker is enabled for the sake
+	 * of simplicity, since this is a debug tool and not meant for use in
+	 * non-debug builds.
+	 */
+	struct request_queue *q = bdev_get_queue(device->bdev);
 	if (!test_bit(QUEUE_FLAG_WC, &q->queue_flags))
 		return;
+#endif
 
 	bio_reset(bio);
 	bio->bi_end_io = btrfs_end_empty_barrier;
-- 
2.33.0

[PATCH 5.10 017/130] thermal: core: Reset previous low and high trip during thermal zone init

[Greg Kroah-Hartman]

From: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>

[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ]

During the suspend is in process, thermal_zone_device_update bails out
thermal zone re-evaluation for any sensor trip violation without
setting next valid trip to that sensor. It assumes during resume
it will re-evaluate same thermal zone and update trip. But when it is
in suspend temperature goes down and on resume path while updating
thermal zone if temperature is less than previously violated trip,
thermal zone set trip function evaluates the same previous high and
previous low trip as new high and low trip. Since there is no change
in high/low trip, it bails out from thermal zone set trip API without
setting any trip. It leads to a case where sensor high trip or low
trip is disabled forever even though thermal zone has a valid high
or low trip.

During thermal zone device init, reset thermal zone previous high
and low trip. It resolves above mentioned scenario.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/thermal_core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 17de8a9b991e9..d9e34ac376626 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -474,6 +474,8 @@ static void thermal_zone_device_init(struct thermal_zone_device *tz)
 {
 	struct thermal_instance *pos;
 	tz->temperature = THERMAL_TEMP_INVALID;
+	tz->prev_low_trip = -INT_MAX;
+	tz->prev_high_trip = INT_MAX;
 	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
 		pos->initialized = false;
 }
-- 
2.33.0

[PATCH 5.10 018/130] scsi: iscsi: Unblock session then wake up error handler

[Greg Kroah-Hartman]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ]

We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.

For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.

Set the device state then call into libiscsi to wake up the error handler.

Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_transport_iscsi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 3f7fa8de36427..a5759d0e388a8 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1909,12 +1909,12 @@ static void session_recovery_timedout(struct work_struct *work)
 	}
 	spin_unlock_irqrestore(&session->lock, flags);
 
-	if (session->transport->session_recovery_timedout)
-		session->transport->session_recovery_timedout(session);
-
 	ISCSI_DBG_TRANS_SESSION(session, "Unblocking SCSI target\n");
 	scsi_target_unblock(&session->dev, SDEV_TRANSPORT_OFFLINE);
 	ISCSI_DBG_TRANS_SESSION(session, "Completed unblocking SCSI target\n");
+
+	if (session->transport->session_recovery_timedout)
+		session->transport->session_recovery_timedout(session);
 }
 
 static void __iscsi_unblock_session(struct work_struct *work)
-- 
2.33.0

[PATCH 5.10 019/130] drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again

[Greg Kroah-Hartman]

From: shaoyunl <shaoyun.liu@amd.com>

[ Upstream commit 2cf49e00d40d5132e3d067b5aa6d84791929ab15 ]

In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch
already been called, the start_cpsch will not be called since there is no resume in this
case.  When reset been triggered again, driver should avoid to do uninitialization again.

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index 352a32dc609b2..2645ebc63a14d 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1207,6 +1207,11 @@ static int stop_cpsch(struct device_queue_manager *dqm)
 	bool hanging;
 
 	dqm_lock(dqm);
+	if (!dqm->sched_running) {
+		dqm_unlock(dqm);
+		return 0;
+	}
+
 	if (!dqm->is_hws_hang)
 		unmap_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0);
 	hanging = dqm->is_hws_hang || dqm->is_resetting;
-- 
2.33.0

[PATCH 5.10 020/130] drm/amd/amdgpu: fix potential memleak

[Greg Kroah-Hartman]

From: Bernard Zhao <bernard@vivo.com>

[ Upstream commit 27dfaedc0d321b4ea4e10c53e4679d6911ab17aa ]

In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
index 0526dec1d736e..042c85fc528bb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
@@ -358,6 +358,7 @@ struct amdgpu_hive_info *amdgpu_get_xgmi_hive(struct amdgpu_device *adev)
 			"%s", "xgmi_hive_info");
 	if (ret) {
 		dev_err(adev->dev, "XGMI: failed initializing kobject for xgmi hive\n");
+		kobject_put(&hive->kobj);
 		kfree(hive);
 		hive = NULL;
 		goto pro_end;
-- 
2.33.0

[PATCH 5.10 021/130] ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit 1527f69204fe35f341cb599f1cb01bd02daf4374 ]

AMD requires that the SATA controller be configured for devsleep in order
for S0i3 entry to work properly.

commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with
SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile
platforms that are using s0ix.  Add the PCI ID for the SATA controller in
Green Sardine platforms to extend this policy by default for AMD based
systems using s0i3 as well.

Cc: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/ahci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 33192a8f687d6..ff2add0101fe5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -442,6 +442,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* AMD */
 	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
 	{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
+	{ PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
-- 
2.33.0

[PATCH 5.10 022/130] ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()

[Greg Kroah-Hartman]

From: Teng Qi <starmiku1207184332@gmail.com>

[ Upstream commit a66998e0fbf213d47d02813b9679426129d0d114 ]

The if statement:
  if (port >= DSAF_GE_NUM)
        return;

limits the value of port less than DSAF_GE_NUM (i.e., 8).
However, if the value of port is 6 or 7, an array overflow could occur:
  port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;

because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).

To fix this possible array overflow, we first check port and if it is
greater than or equal to DSAF_MAX_PORT_NUM, the function returns.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
index a9aca8c24e90d..aa87e4d121532 100644
--- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c
@@ -400,6 +400,10 @@ static void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port,
 		return;
 
 	if (!HNS_DSAF_IS_DEBUG(dsaf_dev)) {
+		/* DSAF_MAX_PORT_NUM is 6, but DSAF_GE_NUM is 8.
+		   We need check to prevent array overflow */
+		if (port >= DSAF_MAX_PORT_NUM)
+			return;
 		reg_val_1  = 0x1 << port;
 		port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
 		/* there is difference between V1 and V2 in register.*/
-- 
2.33.0

[PATCH 5.10 023/130] ipv6: check return value of ipv6_skip_exthdr

[Greg Kroah-Hartman]

From: Jordy Zomer <jordy@pwning.systems>

[ Upstream commit 5f9c55c8066bcd93ac25234a02585701fe2e31df ]

The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.

EDIT:  added {}'s, thanks Kees

Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/esp6.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index 8d001f665fb15..7f2ffc7b1f75a 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -808,6 +808,12 @@ int esp6_input_done2(struct sk_buff *skb, int err)
 		struct tcphdr *th;
 
 		offset = ipv6_skip_exthdr(skb, offset, &nexthdr, &frag_off);
+
+		if (offset < 0) {
+			err = -EINVAL;
+			goto out;
+		}
+
 		uh = (void *)(skb->data + offset);
 		th = (void *)(skb->data + offset);
 		hdr_len += offset;
-- 
2.33.0

[PATCH 5.10 024/130] net: tulip: de4x5: fix the problem that the array lp->phy[8] may be out of bound

[Greg Kroah-Hartman]

From: zhangyue <zhangyue1@kylinos.cn>

[ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ]

In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.

At this time, the array 'lp->phy[8]' may be out of bound.

Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 30 +++++++++++++++-----------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index 683e328b5461d..ffc25ecfa8d6a 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -4997,19 +4997,23 @@ mii_get_phy(struct net_device *dev)
 	}
 	if ((j == limit) && (i < DE4X5_MAX_MII)) {
 	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
-	    lp->phy[k].addr = i;
-	    lp->phy[k].id = id;
-	    lp->phy[k].spd.reg = GENERIC_REG;      /* ANLPA register         */
-	    lp->phy[k].spd.mask = GENERIC_MASK;    /* 100Mb/s technologies   */
-	    lp->phy[k].spd.value = GENERIC_VALUE;  /* TX & T4, H/F Duplex    */
-	    lp->mii_cnt++;
-	    lp->active++;
-	    printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
-	    j = de4x5_debug;
-	    de4x5_debug |= DEBUG_MII;
-	    de4x5_dbg_mii(dev, k);
-	    de4x5_debug = j;
-	    printk("\n");
+	    if (k < DE4X5_MAX_PHY) {
+		lp->phy[k].addr = i;
+		lp->phy[k].id = id;
+		lp->phy[k].spd.reg = GENERIC_REG;      /* ANLPA register         */
+		lp->phy[k].spd.mask = GENERIC_MASK;    /* 100Mb/s technologies   */
+		lp->phy[k].spd.value = GENERIC_VALUE;  /* TX & T4, H/F Duplex    */
+		lp->mii_cnt++;
+		lp->active++;
+		printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
+		j = de4x5_debug;
+		de4x5_debug |= DEBUG_MII;
+		de4x5_dbg_mii(dev, k);
+		de4x5_debug = j;
+		printk("\n");
+	    } else {
+		goto purgatory;
+	    }
 	}
     }
   purgatory:
-- 
2.33.0

[PATCH 5.10 025/130] net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()

[Greg Kroah-Hartman]

From: Teng Qi <starmiku1207184332@gmail.com>

[ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ]

The definition of macro MOTO_SROM_BUG is:
  #define MOTO_SROM_BUG    (lp->active == 8 && (get_unaligned_le32(
  dev->dev_addr) & 0x00ffffff) == 0x3e0008)

and the if statement
  if (MOTO_SROM_BUG) lp->active = 0;

using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
  lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
  lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
  lp->phy[lp->active].mci = *p;

However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/dec/tulip/de4x5.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index ffc25ecfa8d6a..8edd394bc3358 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -4706,6 +4706,10 @@ type3_infoblock(struct net_device *dev, u_char count, u_char *p)
         lp->ibn = 3;
         lp->active = *p++;
 	if (MOTO_SROM_BUG) lp->active = 0;
+	/* if (MOTO_SROM_BUG) statement indicates lp->active could
+	 * be 8 (i.e. the size of array lp->phy) */
+	if (WARN_ON(lp->active >= ARRAY_SIZE(lp->phy)))
+		return -EINVAL;
 	lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
 	lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
 	lp->phy[lp->active].mc  = get_unaligned_le16(p); p += 2;
-- 
2.33.0

[PATCH 5.10 026/130] perf inject: Fix ARM SPE handling

[Greg Kroah-Hartman]

From: German Gomez <german.gomez@arm.com>

[ Upstream commit 9e1a8d9f683260d50e0a14176d3f7c46a93b2700 ]

'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:

  # ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1
  # ./perf inject -i perf.data -o perf.inject.data --itrace
  # ./perf report -i perf.inject.data --stdio

  0x42c00 [0x8]: failed to process type: 9 [Bad address]
  Error:
  failed to process sample

As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.

[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210412091006.468557-1-leo.yan@linaro.org/#24117339
[2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=133fe2e617e48ca0948983329f43877064ffda3e#n1196

Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/arm-spe.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/tools/perf/util/arm-spe.c b/tools/perf/util/arm-spe.c
index 3882a5360ada4..0350020acb96f 100644
--- a/tools/perf/util/arm-spe.c
+++ b/tools/perf/util/arm-spe.c
@@ -48,6 +48,7 @@ struct arm_spe {
 	u8				timeless_decoding;
 	u8				data_queued;
 
+	u64				sample_type;
 	u8				sample_flc;
 	u8				sample_llc;
 	u8				sample_tlb;
@@ -244,6 +245,12 @@ static void arm_spe_prep_sample(struct arm_spe *spe,
 	event->sample.header.size = sizeof(struct perf_event_header);
 }
 
+static int arm_spe__inject_event(union perf_event *event, struct perf_sample *sample, u64 type)
+{
+	event->header.size = perf_event__sample_event_size(sample, type, 0);
+	return perf_event__synthesize_sample(event, type, 0, sample);
+}
+
 static inline int
 arm_spe_deliver_synth_event(struct arm_spe *spe,
 			    struct arm_spe_queue *speq __maybe_unused,
@@ -252,6 +259,12 @@ arm_spe_deliver_synth_event(struct arm_spe *spe,
 {
 	int ret;
 
+	if (spe->synth_opts.inject) {
+		ret = arm_spe__inject_event(event, sample, spe->sample_type);
+		if (ret)
+			return ret;
+	}
+
 	ret = perf_session__deliver_synth_event(spe->session, event, sample);
 	if (ret)
 		pr_err("ARM SPE: failed to deliver event, error %d\n", ret);
@@ -809,6 +822,8 @@ arm_spe_synth_events(struct arm_spe *spe, struct perf_session *session)
 	else
 		attr.sample_type |= PERF_SAMPLE_TIME;
 
+	spe->sample_type = attr.sample_type;
+
 	attr.exclude_user = evsel->core.attr.exclude_user;
 	attr.exclude_kernel = evsel->core.attr.exclude_kernel;
 	attr.exclude_hv = evsel->core.attr.exclude_hv;
-- 
2.33.0

[PATCH 5.10 027/130] perf hist: Fix memory leak of a perf_hpp_fmt

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit 0ca1f534a776cc7d42f2c33da4732b74ec2790cd ]

perf_hpp__column_unregister() removes an entry from a list but doesn't
free the memory causing a memory leak spotted by leak sanitizer.

Add the free while at the same time reducing the scope of the function
to static.

Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/ui/hist.c   | 28 ++++++++++++++--------------
 tools/perf/util/hist.h |  1 -
 2 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c
index c1f24d0048527..5075ecead5f3d 100644
--- a/tools/perf/ui/hist.c
+++ b/tools/perf/ui/hist.c
@@ -535,6 +535,18 @@ struct perf_hpp_list perf_hpp_list = {
 #undef __HPP_SORT_ACC_FN
 #undef __HPP_SORT_RAW_FN
 
+static void fmt_free(struct perf_hpp_fmt *fmt)
+{
+	/*
+	 * At this point fmt should be completely
+	 * unhooked, if not it's a bug.
+	 */
+	BUG_ON(!list_empty(&fmt->list));
+	BUG_ON(!list_empty(&fmt->sort_list));
+
+	if (fmt->free)
+		fmt->free(fmt);
+}
 
 void perf_hpp__init(void)
 {
@@ -598,9 +610,10 @@ void perf_hpp_list__prepend_sort_field(struct perf_hpp_list *list,
 	list_add(&format->sort_list, &list->sorts);
 }
 
-void perf_hpp__column_unregister(struct perf_hpp_fmt *format)
+static void perf_hpp__column_unregister(struct perf_hpp_fmt *format)
 {
 	list_del_init(&format->list);
+	fmt_free(format);
 }
 
 void perf_hpp__cancel_cumulate(void)
@@ -672,19 +685,6 @@ void perf_hpp__append_sort_keys(struct perf_hpp_list *list)
 }
 
 
-static void fmt_free(struct perf_hpp_fmt *fmt)
-{
-	/*
-	 * At this point fmt should be completely
-	 * unhooked, if not it's a bug.
-	 */
-	BUG_ON(!list_empty(&fmt->list));
-	BUG_ON(!list_empty(&fmt->sort_list));
-
-	if (fmt->free)
-		fmt->free(fmt);
-}
-
 void perf_hpp__reset_output_field(struct perf_hpp_list *list)
 {
 	struct perf_hpp_fmt *fmt, *tmp;
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 96b1c13bbccc5..919f2c6c48142 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -362,7 +362,6 @@ enum {
 };
 
 void perf_hpp__init(void);
-void perf_hpp__column_unregister(struct perf_hpp_fmt *format);
 void perf_hpp__cancel_cumulate(void);
 void perf_hpp__setup_output_field(struct perf_hpp_list *list);
 void perf_hpp__reset_output_field(struct perf_hpp_list *list);
-- 
2.33.0

[PATCH 5.10 028/130] perf report: Fix memory leaks around perf_tip()

[Greg Kroah-Hartman]

From: Ian Rogers <irogers@google.com>

[ Upstream commit d9fc706108c15f8bc2d4ccccf8e50f74830fabd9 ]

perf_tip() may allocate memory or use a literal, this means memory
wasn't freed if allocated. Change the API so that literals aren't used.

At the same time add missing frees for system_path. These issues were
spotted using leak sanitizer.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118073804.2149974-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/builtin-report.c | 15 +++++++++------
 tools/perf/util/util.c      | 14 +++++++-------
 tools/perf/util/util.h      |  2 +-
 3 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5824aa24acfcc..91cab5cdfbc16 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -610,14 +610,17 @@ static int report__browse_hists(struct report *rep)
 	int ret;
 	struct perf_session *session = rep->session;
 	struct evlist *evlist = session->evlist;
-	const char *help = perf_tip(system_path(TIPDIR));
+	char *help = NULL, *path = NULL;
 
-	if (help == NULL) {
+	path = system_path(TIPDIR);
+	if (perf_tip(&help, path) || help == NULL) {
 		/* fallback for people who don't install perf ;-) */
-		help = perf_tip(DOCDIR);
-		if (help == NULL)
-			help = "Cannot load tips.txt file, please install perf!";
+		free(path);
+		path = system_path(DOCDIR);
+		if (perf_tip(&help, path) || help == NULL)
+			help = strdup("Cannot load tips.txt file, please install perf!");
 	}
+	free(path);
 
 	switch (use_browser) {
 	case 1:
@@ -644,7 +647,7 @@ static int report__browse_hists(struct report *rep)
 		ret = perf_evlist__tty_browse_hists(evlist, rep, help);
 		break;
 	}
-
+	free(help);
 	return ret;
 }
 
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 37a9492edb3eb..df3c4671be72a 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -379,32 +379,32 @@ fetch_kernel_version(unsigned int *puint, char *str,
 	return 0;
 }
 
-const char *perf_tip(const char *dirpath)
+int perf_tip(char **strp, const char *dirpath)
 {
 	struct strlist *tips;
 	struct str_node *node;
-	char *tip = NULL;
 	struct strlist_config conf = {
 		.dirname = dirpath,
 		.file_only = true,
 	};
+	int ret = 0;
 
+	*strp = NULL;
 	tips = strlist__new("tips.txt", &conf);
 	if (tips == NULL)
-		return errno == ENOENT ? NULL :
-			"Tip: check path of tips.txt or get more memory! ;-p";
+		return -errno;
 
 	if (strlist__nr_entries(tips) == 0)
 		goto out;
 
 	node = strlist__entry(tips, random() % strlist__nr_entries(tips));
-	if (asprintf(&tip, "Tip: %s", node->s) < 0)
-		tip = (char *)"Tip: get more memory! ;-)";
+	if (asprintf(strp, "Tip: %s", node->s) < 0)
+		ret = -ENOMEM;
 
 out:
 	strlist__delete(tips);
 
-	return tip;
+	return ret;
 }
 
 char *perf_exe(char *buf, int len)
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index ad737052e5977..9f0d36ba77f2d 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -39,7 +39,7 @@ int fetch_kernel_version(unsigned int *puint,
 #define KVER_FMT	"%d.%d.%d"
 #define KVER_PARAM(x)	KVER_VERSION(x), KVER_PATCHLEVEL(x), KVER_SUBLEVEL(x)
 
-const char *perf_tip(const char *dirpath);
+int perf_tip(char **strp, const char *dirpath);
 
 #ifndef HAVE_SCHED_GETCPU_SUPPORT
 int sched_getcpu(void);
-- 
2.33.0

[PATCH 5.10 029/130] net/smc: Avoid warning of possible recursive locking

[Greg Kroah-Hartman]

From: Wen Gu <guwen@linux.alibaba.com>

[ Upstream commit 7a61432dc81375be06b02f0061247d3efbdfce3a ]

Possible recursive locking is detected by lockdep when SMC
falls back to TCP. The corresponding warnings are as follows:

 ============================================
 WARNING: possible recursive locking detected
 5.16.0-rc1+ #18 Tainted: G            E
 --------------------------------------------
 wrk/1391 is trying to acquire lock:
 ffff975246c8e7d8 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0x109/0x250 [smc]

 but task is already holding lock:
 ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&ei->socket.wq.wait);
   lock(&ei->socket.wq.wait);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 2 locks held by wrk/1391:
  #0: ffff975246040130 (sk_lock-AF_SMC){+.+.}-{0:0}, at: smc_connect+0x43/0x150 [smc]
  #1: ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]

 stack backtrace:
 Call Trace:
  <TASK>
  dump_stack_lvl+0x56/0x7b
  __lock_acquire+0x951/0x11f0
  lock_acquire+0x27a/0x320
  ? smc_switch_to_fallback+0x109/0x250 [smc]
  ? smc_switch_to_fallback+0xfe/0x250 [smc]
  _raw_spin_lock_irq+0x3b/0x80
  ? smc_switch_to_fallback+0x109/0x250 [smc]
  smc_switch_to_fallback+0x109/0x250 [smc]
  smc_connect_fallback+0xe/0x30 [smc]
  __smc_connect+0xcf/0x1090 [smc]
  ? mark_held_locks+0x61/0x80
  ? __local_bh_enable_ip+0x77/0xe0
  ? lockdep_hardirqs_on+0xbf/0x130
  ? smc_connect+0x12a/0x150 [smc]
  smc_connect+0x12a/0x150 [smc]
  __sys_connect+0x8a/0xc0
  ? syscall_enter_from_user_mode+0x20/0x70
  __x64_sys_connect+0x16/0x20
  do_syscall_64+0x34/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae

The nested locking in smc_switch_to_fallback() is considered to
possibly cause a deadlock because smc_wait->lock and clc_wait->lock
are the same type of lock. But actually it is safe so far since
there is no other place trying to obtain smc_wait->lock when
clc_wait->lock is held. So the patch replaces spin_lock() with
spin_lock_nested() to avoid false report by lockdep.

Link: https://lkml.org/lkml/2021/11/19/962
Fixes: 2153bd1e3d3d ("Transfer remaining wait queue entries during fallback")
Reported-by: syzbot+e979d3597f48262cb4ee@syzkaller.appspotmail.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/smc/af_smc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 04bf8088872a9..d324a12c26cd9 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -529,7 +529,7 @@ static void smc_switch_to_fallback(struct smc_sock *smc)
 		 * to clcsocket->wq during the fallback.
 		 */
 		spin_lock_irqsave(&smc_wait->lock, flags);
-		spin_lock(&clc_wait->lock);
+		spin_lock_nested(&clc_wait->lock, SINGLE_DEPTH_NESTING);
 		list_splice_init(&smc_wait->head, &clc_wait->head);
 		spin_unlock(&clc_wait->lock);
 		spin_unlock_irqrestore(&smc_wait->lock, flags);
-- 
2.33.0

[PATCH 5.10 030/130] ACPI: Add stubs for wakeup handler functions

[Greg Kroah-Hartman]

From: Mario Limonciello <mario.limonciello@amd.com>

[ Upstream commit e9380df851878cee71df5a1c7611584421527f7e ]

The commit ddfd9dcf270c ("ACPI: PM: Add acpi_[un]register_wakeup_handler()")
added new functions for drivers to use during the s2idle wakeup path, but
didn't add stubs for when CONFIG_ACPI wasn't set.

Add those stubs in for other drivers to be able to use.

Fixes: ddfd9dcf270c ("ACPI: PM: Add acpi_[un]register_wakeup_handler()")
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20211101014853.6177-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/acpi.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index fdb1d5262ce84..96d69404a54ff 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -953,6 +953,15 @@ static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
 	return NULL;
 }
 
+static inline int acpi_register_wakeup_handler(int wake_irq,
+	bool (*wakeup)(void *context), void *context)
+{
+	return -ENXIO;
+}
+
+static inline void acpi_unregister_wakeup_handler(
+	bool (*wakeup)(void *context), void *context) { }
+
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
-- 
2.33.0

[PATCH 5.10 031/130] vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit

[Greg Kroah-Hartman]

From: Stephen Suryaputra <ssuryaextr@gmail.com>

commit ee201011c1e1563c114a55c86eb164b236f18e84 upstream.

IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.

One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add <label> dev <vrf>" command.

The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.

Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/vrf.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -497,6 +497,7 @@ static netdev_tx_t vrf_process_v6_outbou
 	/* strip the ethernet header added for pass through VRF device */
 	__skb_pull(skb, skb_network_offset(skb));
 
+	memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
 	ret = vrf_ip6_local_out(net, skb->sk, skb);
 	if (unlikely(net_xmit_eval(ret)))
 		dev->stats.tx_errors++;
@@ -580,6 +581,7 @@ static netdev_tx_t vrf_process_v4_outbou
 					       RT_SCOPE_LINK);
 	}
 
+	memset(IPCB(skb), 0, sizeof(*IPCB(skb)));
 	ret = vrf_ip_local_out(dev_net(skb_dst(skb)->dev), skb->sk, skb);
 	if (unlikely(net_xmit_eval(ret)))
 		vrf_dev->stats.tx_errors++;

[PATCH 5.10 032/130] kprobes: Limit max data_size of the kretprobe instances

[Greg Kroah-Hartman]

From: Masami Hiramatsu <mhiramat@kernel.org>

commit 6bbfa44116689469267f1a6e3d233b52114139d2 upstream.

The 'kprobe::data_size' is unsigned, thus it can not be negative.  But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.

To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.

Link: https://lkml.kernel.org/r/163836995040.432120.10322772773821182925.stgit@devnote2

Cc: stable@vger.kernel.org
Fixes: f47cd9b553aa ("kprobes: kretprobe user entry-handler")
Reported-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/kprobes.h |    2 ++
 kernel/kprobes.c        |    3 +++
 2 files changed, 5 insertions(+)

--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -155,6 +155,8 @@ struct kretprobe {
 	raw_spinlock_t lock;
 };
 
+#define KRETPROBE_MAX_DATA_SIZE	4096
+
 struct kretprobe_instance {
 	union {
 		struct hlist_node hlist;
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -2137,6 +2137,9 @@ int register_kretprobe(struct kretprobe
 		}
 	}
 
+	if (rp->data_size > KRETPROBE_MAX_DATA_SIZE)
+		return -E2BIG;
+
 	rp->kp.pre_handler = pre_handler_kretprobe;
 	rp->kp.post_handler = NULL;
 	rp->kp.fault_handler = NULL;

[PATCH 5.10 033/130] rt2x00: do not mark device gone on EPROTO errors during start

[Greg Kroah-Hartman]

From: Stanislaw Gruszka <stf_xl@wp.pl>

commit ed53ae75693096f1c10b4561edd31a07b631bd72 upstream.

As reported by Exuvo is possible that we have lot's of EPROTO errors
during device start i.e. firmware load. But after that device works
correctly. Hence marking device gone by few EPROTO errors done by
commit e383c70474db ("rt2x00: check number of EPROTO errors") caused
regression - Exuvo device stop working after kernel update. To fix
disable the check during device start.

Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/
Reported-and-tested-by: Exuvo <exuvo@exuvo.se>
Fixes: e383c70474db ("rt2x00: check number of EPROTO errors")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -25,6 +25,9 @@ static bool rt2x00usb_check_usb_error(st
 	if (status == -ENODEV || status == -ENOENT)
 		return true;
 
+	if (!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
+		return false;
+
 	if (status == -EPROTO || status == -ETIMEDOUT)
 		rt2x00dev->num_proto_errs++;
 	else

[PATCH 5.10 034/130] ipmi: Move remove_work to dedicated workqueue

[Greg Kroah-Hartman]

From: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>

commit 1d49eb91e86e8c1c1614c72e3e958b6b7e2472a9 upstream.

Currently when removing an ipmi_user the removal is deferred as a work on
the system's workqueue. Although this guarantees the free operation will
occur in non atomic context, it can race with the ipmi_msghandler module
removal (see [1]) . In case a remove_user work is scheduled for removal
and shortly after ipmi_msghandler module is removed we can end up in a
situation where the module is removed fist and when the work is executed
the system crashes with :
BUG: unable to handle page fault for address: ffffffffc05c3450
PF: supervisor instruction fetch in kernel mode
PF: error_code(0x0010) - not-present page
because the pages of the module are gone. In cleanup_ipmi() there is no
easy way to detect if there are any pending works to flush them before
removing the module. This patch creates a separate workqueue and schedules
the remove_work works on it. When removing the module the workqueue is
drained when destroyed to avoid the race.

[1] https://bugs.launchpad.net/bugs/1950666

Cc: stable@vger.kernel.org # 5.1
Fixes: 3b9a907223d7 (ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier)
Signed-off-by: Ioanna Alifieraki <ioanna-maria.alifieraki@canonical.com>
Message-Id: <20211115131645.25116-1-ioanna-maria.alifieraki@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/ipmi_msghandler.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -203,6 +203,8 @@ struct ipmi_user {
 	struct work_struct remove_work;
 };
 
+struct workqueue_struct *remove_work_wq;
+
 static struct ipmi_user *acquire_ipmi_user(struct ipmi_user *user, int *index)
 	__acquires(user->release_barrier)
 {
@@ -1272,7 +1274,7 @@ static void free_user(struct kref *ref)
 	struct ipmi_user *user = container_of(ref, struct ipmi_user, refcount);
 
 	/* SRCU cleanup must happen in task context. */
-	schedule_work(&user->remove_work);
+	queue_work(remove_work_wq, &user->remove_work);
 }
 
 static void _ipmi_destroy_user(struct ipmi_user *user)
@@ -5166,6 +5168,13 @@ static int ipmi_init_msghandler(void)
 
 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
+	remove_work_wq = create_singlethread_workqueue("ipmi-msghandler-remove-wq");
+	if (!remove_work_wq) {
+		pr_err("unable to create ipmi-msghandler-remove-wq workqueue");
+		rv = -ENOMEM;
+		goto out;
+	}
+
 	initialized = true;
 
 out:
@@ -5191,6 +5200,8 @@ static void __exit cleanup_ipmi(void)
 	int count;
 
 	if (initialized) {
+		destroy_workqueue(remove_work_wq);
+
 		atomic_notifier_chain_unregister(&panic_notifier_list,
 						 &panic_block);
 

[PATCH 5.10 035/130] cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()

[Greg Kroah-Hartman]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

commit 2c1b5a84669d2477d8fffe9136e86a2cff591729 upstream.

When I hot added a CPU, I found 'cpufreq' directory was not created
below /sys/devices/system/cpu/cpuX/.

It is because get_cpu_device() failed in add_cpu_dev_symlink().

cpufreq_add_dev() is the .add_dev callback of a CPU subsys interface.
It will be called when the CPU device registered into the system.
The call chain is as follows:

  register_cpu()
  ->device_register()
   ->device_add()
    ->bus_probe_device()
     ->cpufreq_add_dev()

But only after the CPU device has been registered, we can get the
CPU device by get_cpu_device(), otherwise it will return NULL.

Since we already have the CPU device in cpufreq_add_dev(), pass
it to add_cpu_dev_symlink().

I noticed that the 'kobj' of the CPU device has been added into
the system before cpufreq_add_dev().

Fixes: 2f0ba790df51 ("cpufreq: Fix creation of symbolic links to policy directories")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/cpufreq/cpufreq.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1004,10 +1004,9 @@ static struct kobj_type ktype_cpufreq =
 	.release	= cpufreq_sysfs_release,
 };
 
-static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu)
+static void add_cpu_dev_symlink(struct cpufreq_policy *policy, unsigned int cpu,
+				struct device *dev)
 {
-	struct device *dev = get_cpu_device(cpu);
-
 	if (unlikely(!dev))
 		return;
 
@@ -1391,7 +1390,7 @@ static int cpufreq_online(unsigned int c
 	if (new_policy) {
 		for_each_cpu(j, policy->related_cpus) {
 			per_cpu(cpufreq_cpu_data, j) = policy;
-			add_cpu_dev_symlink(policy, j);
+			add_cpu_dev_symlink(policy, j, get_cpu_device(j));
 		}
 
 		policy->min_freq_req = kzalloc(2 * sizeof(*policy->min_freq_req),
@@ -1553,7 +1552,7 @@ static int cpufreq_add_dev(struct device
 	/* Create sysfs link on CPU registration */
 	policy = per_cpu(cpufreq_cpu_data, cpu);
 	if (policy)
-		add_cpu_dev_symlink(policy, cpu);
+		add_cpu_dev_symlink(policy, cpu, dev);
 
 	return 0;
 }

[PATCH 5.10 036/130] s390/pci: move pseudo-MMIO to prevent MIO overlap

[Greg Kroah-Hartman]

From: Niklas Schnelle <schnelle@linux.ibm.com>

commit 52d04d408185b7aa47628d2339c28ec70074e0ae upstream.

When running without MIO support, with pci=nomio or for devices which
are not MIO-capable the zPCI subsystem generates pseudo-MMIO addresses
to allow access to PCI BARs via MMIO based Linux APIs even though the
platform uses function handles and BAR numbers.

This is done by stashing an index into our global IOMAP array which
contains the function handle in the 16 most significant bits of the
addresses returned by ioremap() always setting the most significant bit.

On the other hand the MIO addresses assigned by the platform for use,
while requiring special instructions, allow PCI access with virtually
mapped physical addresses. Now the problem is that these MIO addresses
and our own pseudo-MMIO addresses may overlap, while functionally this
would not be a problem by itself this overlap is detected by common code
as both address types are added as resources in the iomem_resource tree.
This leads to the overlapping resource claim of either the MIO capable
or non-MIO capable devices with being rejected.

Since PCI is tightly coupled to the use of the iomem_resource tree, see
for example the code for request_mem_region(), we can't reasonably get
rid of the overlap being detected by keeping our pseudo-MMIO addresses
out of the iomem_resource tree.

Instead let's move the range used by our own pseudo-MMIO addresses by
starting at (1UL << 62) and only using addresses below (1UL << 63) thus
avoiding the range currently used for MIO addresses.

Fixes: c7ff0e918a7c ("s390/pci: deal with devices that have no support for MIO instructions")
Cc: stable@vger.kernel.org # 5.3+
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/s390/include/asm/pci_io.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/s390/include/asm/pci_io.h
+++ b/arch/s390/include/asm/pci_io.h
@@ -14,12 +14,13 @@
 
 /* I/O Map */
 #define ZPCI_IOMAP_SHIFT		48
-#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000UL
+#define ZPCI_IOMAP_ADDR_SHIFT		62
+#define ZPCI_IOMAP_ADDR_BASE		(1UL << ZPCI_IOMAP_ADDR_SHIFT)
 #define ZPCI_IOMAP_ADDR_OFF_MASK	((1UL << ZPCI_IOMAP_SHIFT) - 1)
 #define ZPCI_IOMAP_MAX_ENTRIES							\
-	((ULONG_MAX - ZPCI_IOMAP_ADDR_BASE + 1) / (1UL << ZPCI_IOMAP_SHIFT))
+	(1UL << (ZPCI_IOMAP_ADDR_SHIFT - ZPCI_IOMAP_SHIFT))
 #define ZPCI_IOMAP_ADDR_IDX_MASK						\
-	(~ZPCI_IOMAP_ADDR_OFF_MASK - ZPCI_IOMAP_ADDR_BASE)
+	((ZPCI_IOMAP_ADDR_BASE - 1) & ~ZPCI_IOMAP_ADDR_OFF_MASK)
 
 struct zpci_iomap_entry {
 	u32 fh;

[PATCH 5.10 037/130] fget: check that the fd still exists after getting a ref to it

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 054aa8d439b9185d4f5eb9a90282d1ce74772969 upstream.

Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK").

See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.

The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.

This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design.  Getting that reference count out of order isn't a problem per
se.

But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.

In commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.

That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.

Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/file.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/file.c
+++ b/fs/file.c
@@ -834,6 +834,10 @@ loop:
 			file = NULL;
 		else if (!get_file_rcu_many(file, refs))
 			goto loop;
+		else if (__fcheck_files(files, fd) != file) {
+			fput_many(file, refs);
+			goto loop;
+		}
 	}
 	rcu_read_unlock();
 

[PATCH 5.10 038/130] sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream.

When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux,
a bug is reported:
 ==================================================================
 BUG: Unable to handle kernel data access on read at 0x80000800805b502c
 Oops: Kernel access of bad area, sig: 11 [#1]
 NIP [c0000000000388a4] .ioread32+0x4/0x20
 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl]
 Call Trace:
  .free_irq+0x1c/0x4e0 (unreliable)
  .ata_host_stop+0x74/0xd0 [libata]
  .release_nodes+0x330/0x3f0
  .device_release_driver_internal+0x178/0x2c0
  .driver_detach+0x64/0xd0
  .bus_remove_driver+0x70/0xf0
  .driver_unregister+0x38/0x80
  .platform_driver_unregister+0x14/0x30
  .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
  .__se_sys_delete_module+0x1ec/0x2d0
  .system_call_exception+0xfc/0x1f0
  system_call_common+0xf8/0x200
 ==================================================================

The triggering of the BUG is shown in the following stack:

driver_detach
  device_release_driver_internal
    __device_release_driver
      drv->remove(dev) --> platform_drv_remove/platform_remove
        drv->remove(dev) --> sata_fsl_remove
          iounmap(host_priv->hcr_base);			<---- unmap
          kfree(host_priv);                             <---- free
      devres_release_all
        release_nodes
          dr->node.release(dev, dr->data) --> ata_host_stop
            ap->ops->port_stop(ap) --> sata_fsl_port_stop
                ioread32(hcr_base + HCONTROL)           <---- UAF
            host->ops->host_stop(host)

The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should
not be executed in drv->remove. These functions should be executed in
host_stop after port_stop. Therefore, we move these functions to the
new function sata_fsl_host_stop and bind the new function to host_stop.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/sata_fsl.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1394,6 +1394,14 @@ static int sata_fsl_init_controller(stru
 	return 0;
 }
 
+static void sata_fsl_host_stop(struct ata_host *host)
+{
+        struct sata_fsl_host_priv *host_priv = host->private_data;
+
+        iounmap(host_priv->hcr_base);
+        kfree(host_priv);
+}
+
 /*
  * scsi mid-layer and libata interface structures
  */
@@ -1426,6 +1434,8 @@ static struct ata_port_operations sata_f
 	.port_start = sata_fsl_port_start,
 	.port_stop = sata_fsl_port_stop,
 
+	.host_stop      = sata_fsl_host_stop,
+
 	.pmp_attach = sata_fsl_pmp_attach,
 	.pmp_detach = sata_fsl_pmp_detach,
 };
@@ -1558,8 +1568,6 @@ static int sata_fsl_remove(struct platfo
 	ata_host_detach(host);
 
 	irq_dispose_mapping(host_priv->irq);
-	iounmap(host_priv->hcr_base);
-	kfree(host_priv);
 
 	return 0;
 }

[PATCH 5.10 039/130] sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl

[Greg Kroah-Hartman]

From: Baokun Li <libaokun1@huawei.com>

commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream.

Trying to remove the fsl-sata module in the PPC64 GNU/Linux
leads to the following warning:
 ------------[ cut here ]------------
 remove_proc_entry: removing non-empty directory 'irq/69',
   leaking at least 'fsl-sata[ff0221000.sata]'
 WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722
   .remove_proc_entry+0x20c/0x220
 IRQMASK: 0
 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220
 LR [c000000000338268] .remove_proc_entry+0x208/0x220
 Call Trace:
  .remove_proc_entry+0x208/0x220 (unreliable)
  .unregister_irq_proc+0x104/0x140
  .free_desc+0x44/0xb0
  .irq_free_descs+0x9c/0xf0
  .irq_dispose_mapping+0x64/0xa0
  .sata_fsl_remove+0x58/0xa0 [sata_fsl]
  .platform_drv_remove+0x40/0x90
  .device_release_driver_internal+0x160/0x2c0
  .driver_detach+0x64/0xd0
  .bus_remove_driver+0x70/0xf0
  .driver_unregister+0x38/0x80
  .platform_driver_unregister+0x14/0x30
  .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl]
 ---[ end trace 0ea876d4076908f5 ]---

The driver creates the mapping by calling irq_of_parse_and_map(),
so it also has to dispose the mapping. But the easy way out is to
simply use platform_get_irq() instead of irq_of_parse_map(). Also
we should adapt return value checking and propagate error values.

In this case the mapping is not managed by the device but by
the of core, so the device has not to dispose the mapping.

Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/ata/sata_fsl.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1490,9 +1490,9 @@ static int sata_fsl_probe(struct platfor
 	host_priv->ssr_base = ssr_base;
 	host_priv->csr_base = csr_base;
 
-	irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
-	if (!irq) {
-		dev_err(&ofdev->dev, "invalid irq from platform\n");
+	irq = platform_get_irq(ofdev, 0);
+	if (irq < 0) {
+		retval = irq;
 		goto error_exit_with_cleanup;
 	}
 	host_priv->irq = irq;
@@ -1567,8 +1567,6 @@ static int sata_fsl_remove(struct platfo
 
 	ata_host_detach(host);
 
-	irq_dispose_mapping(host_priv->irq);
-
 	return 0;
 }
 

[PATCH 5.10 040/130] ipv6: fix memory leak in fib6_rule_suppress

[Greg Kroah-Hartman]

From: msizanoen1 <msizanoen@qtmlabs.xyz>

commit cdef485217d30382f3bf6448c54b4401648fe3f1 upstream.

The kernel leaks memory when a `fib` rule is present in IPv6 nftables
firewall rules and a suppress_prefix rule is present in the IPv6 routing
rules (used by certain tools such as wg-quick). In such scenarios, every
incoming packet will leak an allocation in `ip6_dst_cache` slab cache.

After some hours of `bpftrace`-ing and source code reading, I tracked
down the issue to ca7a03c41753 ("ipv6: do not free rt if
FIB_LOOKUP_NOREF is set on suppress rule").

The problem with that change is that the generic `args->flags` always have
`FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag
`RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not
decreasing the refcount when needed.

How to reproduce:
 - Add the following nftables rule to a prerouting chain:
     meta nfproto ipv6 fib saddr . mark . iif oif missing drop
   This can be done with:
     sudo nft create table inet test
     sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }'
     sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop
 - Run:
     sudo ip -6 rule add table main suppress_prefixlength 0
 - Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase
   with every incoming ipv6 packet.

This patch exposes the protocol-specific flags to the protocol
specific `suppress` function, and check the protocol-specific `flags`
argument for RT6_LOOKUP_F_DST_NOREF instead of the generic
FIB_LOOKUP_NOREF when decreasing the refcount, like this.

[1]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L71
[2]: https://github.com/torvalds/linux/blob/ca7a03c4175366a92cee0ccc4fec0038c3266e26/net/ipv6/fib6_rules.c#L99

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/fib_rules.h |    4 +++-
 net/core/fib_rules.c    |    2 +-
 net/ipv4/fib_rules.c    |    1 +
 net/ipv6/fib6_rules.c   |    4 ++--
 4 files changed, 7 insertions(+), 4 deletions(-)

--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -69,7 +69,7 @@ struct fib_rules_ops {
 	int			(*action)(struct fib_rule *,
 					  struct flowi *, int,
 					  struct fib_lookup_arg *);
-	bool			(*suppress)(struct fib_rule *,
+	bool			(*suppress)(struct fib_rule *, int,
 					    struct fib_lookup_arg *);
 	int			(*match)(struct fib_rule *,
 					 struct flowi *, int);
@@ -218,7 +218,9 @@ INDIRECT_CALLABLE_DECLARE(int fib4_rule_
 			    struct fib_lookup_arg *arg));
 
 INDIRECT_CALLABLE_DECLARE(bool fib6_rule_suppress(struct fib_rule *rule,
+						int flags,
 						struct fib_lookup_arg *arg));
 INDIRECT_CALLABLE_DECLARE(bool fib4_rule_suppress(struct fib_rule *rule,
+						int flags,
 						struct fib_lookup_arg *arg));
 #endif
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -323,7 +323,7 @@ jumped:
 		if (!err && ops->suppress && INDIRECT_CALL_MT(ops->suppress,
 							      fib6_rule_suppress,
 							      fib4_rule_suppress,
-							      rule, arg))
+							      rule, flags, arg))
 			continue;
 
 		if (err != -EAGAIN) {
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -141,6 +141,7 @@ INDIRECT_CALLABLE_SCOPE int fib4_rule_ac
 }
 
 INDIRECT_CALLABLE_SCOPE bool fib4_rule_suppress(struct fib_rule *rule,
+						int flags,
 						struct fib_lookup_arg *arg)
 {
 	struct fib_result *result = (struct fib_result *) arg->result;
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -267,6 +267,7 @@ INDIRECT_CALLABLE_SCOPE int fib6_rule_ac
 }
 
 INDIRECT_CALLABLE_SCOPE bool fib6_rule_suppress(struct fib_rule *rule,
+						int flags,
 						struct fib_lookup_arg *arg)
 {
 	struct fib6_result *res = arg->result;
@@ -294,8 +295,7 @@ INDIRECT_CALLABLE_SCOPE bool fib6_rule_s
 	return false;
 
 suppress_route:
-	if (!(arg->flags & FIB_LOOKUP_NOREF))
-		ip6_rt_put(rt);
+	ip6_rt_put_flags(rt, flags);
 	return true;
 }
 

[PATCH 5.10 041/130] drm/amd/display: Allow DSC on supported MST branch devices

[Greg Kroah-Hartman]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

commit 94ebc035456a4ccacfbbef60c444079a256623ad upstream.

[Why]
When trying to lightup two 4k60 non-DSC displays behind a branch device
that supports DSC we can't lightup both at once due to bandwidth
limitations - each requires 48 VCPI slots but we only have 63.

[How]
The workaround already exists in the code but is guarded by a CONFIG
that cannot be set by the user and shouldn't need to be.

Check for specific branch device IDs to device whether to enable
the workaround for multiple display scenarios.

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c |   20 +++++++++---
 1 file changed, 16 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -36,6 +36,8 @@
 #include "dm_helpers.h"
 
 #include "dc_link_ddc.h"
+#include "ddc_service_types.h"
+#include "dpcd_defs.h"
 
 #include "i2caux_interface.h"
 #if defined(CONFIG_DEBUG_FS)
@@ -152,6 +154,16 @@ static const struct drm_connector_funcs
 };
 
 #if defined(CONFIG_DRM_AMD_DC_DCN)
+static bool needs_dsc_aux_workaround(struct dc_link *link)
+{
+	if (link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 &&
+	    (link->dpcd_caps.dpcd_rev.raw == DPCD_REV_14 || link->dpcd_caps.dpcd_rev.raw == DPCD_REV_12) &&
+	    link->dpcd_caps.sink_count.bits.SINK_COUNT >= 2)
+		return true;
+
+	return false;
+}
+
 static bool validate_dsc_caps_on_connector(struct amdgpu_dm_connector *aconnector)
 {
 	struct dc_sink *dc_sink = aconnector->dc_sink;
@@ -159,7 +171,7 @@ static bool validate_dsc_caps_on_connect
 	u8 dsc_caps[16] = { 0 };
 
 	aconnector->dsc_aux = drm_dp_mst_dsc_aux_for_port(port);
-#if defined(CONFIG_HP_HOOK_WORKAROUND)
+
 	/*
 	 * drm_dp_mst_dsc_aux_for_port() will return NULL for certain configs
 	 * because it only check the dsc/fec caps of the "port variable" and not the dock
@@ -169,10 +181,10 @@ static bool validate_dsc_caps_on_connect
 	 * Workaround: explicitly check the use case above and use the mst dock's aux as dsc_aux
 	 *
 	 */
-
-	if (!aconnector->dsc_aux && !port->parent->port_parent)
+	if (!aconnector->dsc_aux && !port->parent->port_parent &&
+	    needs_dsc_aux_workaround(aconnector->dc_link))
 		aconnector->dsc_aux = &aconnector->mst_port->dm_dp_aux.aux;
-#endif
+
 	if (!aconnector->dsc_aux)
 		return false;
 

[PATCH 5.10 042/130] KVM: Disallow user memslot with size that exceeds "unsigned long"

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 6b285a5587506bae084cf9a3ed5aa491d623b91b upstream.

Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long".  KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows.  The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.

KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.

Fixes: fa3d315a4ce2 ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 virt/kvm/kvm_main.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1297,7 +1297,8 @@ int __kvm_set_memory_region(struct kvm *
 	id = (u16)mem->slot;
 
 	/* General sanity checks */
-	if (mem->memory_size & (PAGE_SIZE - 1))
+	if ((mem->memory_size & (PAGE_SIZE - 1)) ||
+	    (mem->memory_size != (unsigned long)mem->memory_size))
 		return -EINVAL;
 	if (mem->guest_phys_addr & (PAGE_SIZE - 1))
 		return -EINVAL;

[PATCH 5.10 043/130] KVM: nVMX: Flush current VPID (L1 vs. L2) for KVM_REQ_TLB_FLUSH_GUEST

[Greg Kroah-Hartman]

From: Sean Christopherson <seanjc@google.com>

commit 2b4a5a5d56881ece3c66b9a9a8943a6f41bd7349 upstream.

Flush the current VPID when handling KVM_REQ_TLB_FLUSH_GUEST instead of
always flushing vpid01.  Any TLB flush that is triggered when L2 is
active is scoped to L2's VPID (if it has one), e.g. if L2 toggles CR4.PGE
and L1 doesn't intercept PGE writes, then KVM's emulation of the TLB
flush needs to be applied to L2's VPID.

Reported-by: Lai Jiangshan <jiangshanlai+lkml@gmail.com>
Fixes: 07ffaf343e34 ("KVM: nVMX: Sync all PGDs on nested transition with shadow paging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211125014944.536398-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/vmx/vmx.c |   23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -2908,6 +2908,13 @@ static void vmx_flush_tlb_all(struct kvm
 	}
 }
 
+static inline int vmx_get_current_vpid(struct kvm_vcpu *vcpu)
+{
+	if (is_guest_mode(vcpu))
+		return nested_get_vpid02(vcpu);
+	return to_vmx(vcpu)->vpid;
+}
+
 static void vmx_flush_tlb_current(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
@@ -2920,31 +2927,29 @@ static void vmx_flush_tlb_current(struct
 	if (enable_ept)
 		ept_sync_context(construct_eptp(vcpu, root_hpa,
 						mmu->shadow_root_level));
-	else if (!is_guest_mode(vcpu))
-		vpid_sync_context(to_vmx(vcpu)->vpid);
 	else
-		vpid_sync_context(nested_get_vpid02(vcpu));
+		vpid_sync_context(vmx_get_current_vpid(vcpu));
 }
 
 static void vmx_flush_tlb_gva(struct kvm_vcpu *vcpu, gva_t addr)
 {
 	/*
-	 * vpid_sync_vcpu_addr() is a nop if vmx->vpid==0, see the comment in
+	 * vpid_sync_vcpu_addr() is a nop if vpid==0, see the comment in
 	 * vmx_flush_tlb_guest() for an explanation of why this is ok.
 	 */
-	vpid_sync_vcpu_addr(to_vmx(vcpu)->vpid, addr);
+	vpid_sync_vcpu_addr(vmx_get_current_vpid(vcpu), addr);
 }
 
 static void vmx_flush_tlb_guest(struct kvm_vcpu *vcpu)
 {
 	/*
-	 * vpid_sync_context() is a nop if vmx->vpid==0, e.g. if enable_vpid==0
-	 * or a vpid couldn't be allocated for this vCPU.  VM-Enter and VM-Exit
-	 * are required to flush GVA->{G,H}PA mappings from the TLB if vpid is
+	 * vpid_sync_context() is a nop if vpid==0, e.g. if enable_vpid==0 or a
+	 * vpid couldn't be allocated for this vCPU.  VM-Enter and VM-Exit are
+	 * required to flush GVA->{G,H}PA mappings from the TLB if vpid is
 	 * disabled (VM-Enter with vpid enabled and vpid==0 is disallowed),
 	 * i.e. no explicit INVVPID is necessary.
 	 */
-	vpid_sync_context(to_vmx(vcpu)->vpid);
+	vpid_sync_context(vmx_get_current_vpid(vcpu));
 }
 
 void vmx_ept_load_pdptrs(struct kvm_vcpu *vcpu)

[PATCH 5.10 044/130] KVM: x86: Use a stable condition around all VT-d PI paths

[Greg Kroah-Hartman]

From: Paolo Bonzini <pbonzini@redhat.com>

commit 53b7ca1a359389276c76fbc9e1009d8626a17e40 upstream.

Currently, checks for whether VT-d PI can be used refer to the current
status of the feature in the current vCPU; or they more or less pick
vCPU 0 in case a specific vCPU is not available.

However, these checks do not attempt to synchronize with changes to
the IRTE.  In particular, there is no path that updates the IRTE when
APICv is re-activated on vCPU 0; and there is no path to wakeup a CPU
that has APICv disabled, if the wakeup occurs because of an IRTE
that points to a posted interrupt.

To fix this, always go through the VT-d PI path as long as there are
assigned devices and APICv is available on both the host and the VM side.
Since the relevant condition was copied over three times, take the hint
and factor it into a separate function.

Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Message-Id: <20211123004311.2954158-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/vmx/posted_intr.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/arch/x86/kvm/vmx/posted_intr.c
+++ b/arch/x86/kvm/vmx/posted_intr.c
@@ -5,6 +5,7 @@
 #include <asm/cpu.h>
 
 #include "lapic.h"
+#include "irq.h"
 #include "posted_intr.h"
 #include "trace.h"
 #include "vmx.h"
@@ -77,13 +78,18 @@ after_clear_sn:
 		pi_set_on(pi_desc);
 }
 
+static bool vmx_can_use_vtd_pi(struct kvm *kvm)
+{
+	return irqchip_in_kernel(kvm) && enable_apicv &&
+		kvm_arch_has_assigned_device(kvm) &&
+		irq_remapping_cap(IRQ_POSTING_CAP);
+}
+
 void vmx_vcpu_pi_put(struct kvm_vcpu *vcpu)
 {
 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
 
-	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
-		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
-		!kvm_vcpu_apicv_active(vcpu))
+	if (!vmx_can_use_vtd_pi(vcpu->kvm))
 		return;
 
 	/* Set SN when the vCPU is preempted */
@@ -141,9 +147,7 @@ int pi_pre_block(struct kvm_vcpu *vcpu)
 	struct pi_desc old, new;
 	struct pi_desc *pi_desc = vcpu_to_pi_desc(vcpu);
 
-	if (!kvm_arch_has_assigned_device(vcpu->kvm) ||
-		!irq_remapping_cap(IRQ_POSTING_CAP)  ||
-		!kvm_vcpu_apicv_active(vcpu))
+	if (!vmx_can_use_vtd_pi(vcpu->kvm))
 		return 0;
 
 	WARN_ON(irqs_disabled());
@@ -256,9 +260,7 @@ int pi_update_irte(struct kvm *kvm, unsi
 	struct vcpu_data vcpu_info;
 	int idx, ret = 0;
 
-	if (!kvm_arch_has_assigned_device(kvm) ||
-	    !irq_remapping_cap(IRQ_POSTING_CAP) ||
-	    !kvm_vcpu_apicv_active(kvm->vcpus[0]))
+	if (!vmx_can_use_vtd_pi(kvm))
 		return 0;
 
 	idx = srcu_read_lock(&kvm->irq_srcu);

[PATCH 5.10 045/130] KVM: arm64: Avoid setting the upper 32 bits of TCR_EL2 and CPTR_EL2 to 1

[Greg Kroah-Hartman]

From: Catalin Marinas <catalin.marinas@arm.com>

commit 1f80d15020d7f130194821feb1432b67648c632d upstream.

Having a signed (1 << 31) constant for TCR_EL2_RES1 and CPTR_EL2_TCPAC
causes the upper 32-bit to be set to 1 when assigning them to a 64-bit
variable. Bit 32 in TCR_EL2 is no longer RES0 in ARMv8.7: with FEAT_LPA2
it changes the meaning of bits 49:48 and 9:8 in the stage 1 EL2 page
table entries. As a result of the sign-extension, a non-VHE kernel can
no longer boot on a model with ARMv8.7 enabled.

CPTR_EL2 still has the top 32 bits RES0 but we should preempt any future
problems

Make these top bit constants unsigned as per commit df655b75c43f
("arm64: KVM: Avoid setting the upper 32 bits of VTCR_EL2 to 1").

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Chris January <Chris.January@arm.com>
Cc: <stable@vger.kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211125152014.2806582-1-catalin.marinas@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/include/asm/kvm_arm.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -83,7 +83,7 @@
 #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H)
 
 /* TCR_EL2 Registers bits */
-#define TCR_EL2_RES1		((1 << 31) | (1 << 23))
+#define TCR_EL2_RES1		((1U << 31) | (1 << 23))
 #define TCR_EL2_TBI		(1 << 20)
 #define TCR_EL2_PS_SHIFT	16
 #define TCR_EL2_PS_MASK		(7 << TCR_EL2_PS_SHIFT)
@@ -268,7 +268,7 @@
 #define CPTR_EL2_TFP_SHIFT 10
 
 /* Hyp Coprocessor Trap Register */
-#define CPTR_EL2_TCPAC	(1 << 31)
+#define CPTR_EL2_TCPAC	(1U << 31)
 #define CPTR_EL2_TAM	(1 << 30)
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)

[PATCH 5.10 046/130] KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()

[Greg Kroah-Hartman]

From: Lai Jiangshan <laijs@linux.alibaba.com>

commit 05b29633c7a956d5675f5fbba70db0d26aa5e73e upstream.

INVLPG operates on guest virtual address, which are represented by
vcpu->arch.walk_mmu.  In nested virtualization scenarios,
kvm_mmu_invlpg() was using the wrong MMU structure; if L2's invlpg were
emulated by L0 (in practice, it hardly happen) when nested two-dimensional
paging is enabled, the call to ->tlb_flush_gva() would be skipped and
the hardware TLB entry would not be invalidated.

Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20211124122055.64424-5-jiangshanlai@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/mmu/mmu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -5152,7 +5152,7 @@ EXPORT_SYMBOL_GPL(kvm_mmu_invalidate_gva
 
 void kvm_mmu_invlpg(struct kvm_vcpu *vcpu, gva_t gva)
 {
-	kvm_mmu_invalidate_gva(vcpu, vcpu->arch.mmu, gva, INVALID_PAGE);
+	kvm_mmu_invalidate_gva(vcpu, vcpu->arch.walk_mmu, gva, INVALID_PAGE);
 	++vcpu->stat.invlpg;
 }
 EXPORT_SYMBOL_GPL(kvm_mmu_invlpg);

[PATCH 5.10 047/130] tracing/histograms: String compares should not care about signed values

[Greg Kroah-Hartman]

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 450fec13d9170127678f991698ac1a5b05c02e2f upstream.

When comparing two strings for the "onmatch" histogram trigger, fields
that are strings use string comparisons, which do not care about being
signed or not.

Do not fail to match two string fields if one is unsigned char array and
the other is a signed char array.

Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/

Cc: stable@vgerk.kernel.org
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Fixes: b05e89ae7cf3b ("tracing: Accept different type for synthetic event fields")
Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org>
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/trace/trace_events_hist.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -3344,7 +3344,7 @@ static int check_synth_field(struct synt
 
 	if (strcmp(field->type, hist_field->type) != 0) {
 		if (field->size != hist_field->size ||
-		    field->is_signed != hist_field->is_signed)
+		    (!field->is_string && field->is_signed != hist_field->is_signed))
 			return -EINVAL;
 	}
 

[PATCH 5.10 048/130] drm/amdkfd: separate kfd_iommu_resume from kfd_resume

[Greg Kroah-Hartman]

From: James Zhu <James.Zhu@amd.com>

commit fefc01f042f44ede373ee66773b8238dd8fdcb55 upstream.

Separate kfd_iommu_resume from kfd_resume for fine-tuning
of amdgpu device init/resume/reset/recovery sequence.

v2: squash in fix for !CONFIG_HSA_AMD

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h |    1 +
 drivers/gpu/drm/amd/amdkfd/kfd_device.c    |   12 ++++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -262,6 +262,7 @@ bool kgd2kfd_device_init(struct kfd_dev
 			 const struct kgd2kfd_shared_resources *gpu_resources);
 void kgd2kfd_device_exit(struct kfd_dev *kfd);
 void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm);
+int kgd2kfd_resume_iommu(struct kfd_dev *kfd);
 int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm);
 int kgd2kfd_pre_reset(struct kfd_dev *kfd);
 int kgd2kfd_post_reset(struct kfd_dev *kfd);
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -896,17 +896,21 @@ int kgd2kfd_resume(struct kfd_dev *kfd,
 	return ret;
 }
 
-static int kfd_resume(struct kfd_dev *kfd)
+int kgd2kfd_resume_iommu(struct kfd_dev *kfd)
 {
 	int err = 0;
 
 	err = kfd_iommu_resume(kfd);
-	if (err) {
+	if (err)
 		dev_err(kfd_device,
 			"Failed to resume IOMMU for device %x:%x\n",
 			kfd->pdev->vendor, kfd->pdev->device);
-		return err;
-	}
+	return err;
+}
+
+static int kfd_resume(struct kfd_dev *kfd)
+{
+	int err = 0;
 
 	err = kfd->dqm->ops.start(kfd->dqm);
 	if (err) {

[PATCH 5.10 049/130] drm/amdgpu: add amdgpu_amdkfd_resume_iommu

[Greg Kroah-Hartman]

From: James Zhu <James.Zhu@amd.com>

commit 8066008482e533e91934bee49765bf8b4a7c40db upstream.

Add amdgpu_amdkfd_resume_iommu for amdgpu.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c |   10 ++++++++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h |    1 +
 2 files changed, 11 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c
@@ -194,6 +194,16 @@ void amdgpu_amdkfd_suspend(struct amdgpu
 		kgd2kfd_suspend(adev->kfd.dev, run_pm);
 }
 
+int amdgpu_amdkfd_resume_iommu(struct amdgpu_device *adev)
+{
+	int r = 0;
+
+	if (adev->kfd.dev)
+		r = kgd2kfd_resume_iommu(adev->kfd.dev);
+
+	return r;
+}
+
 int amdgpu_amdkfd_resume(struct amdgpu_device *adev, bool run_pm)
 {
 	int r = 0;
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h
@@ -126,6 +126,7 @@ int amdgpu_amdkfd_init(void);
 void amdgpu_amdkfd_fini(void);
 
 void amdgpu_amdkfd_suspend(struct amdgpu_device *adev, bool run_pm);
+int amdgpu_amdkfd_resume_iommu(struct amdgpu_device *adev);
 int amdgpu_amdkfd_resume(struct amdgpu_device *adev, bool run_pm);
 void amdgpu_amdkfd_interrupt(struct amdgpu_device *adev,
 			const void *ih_ring_entry);

[PATCH 5.10 050/130] drm/amdgpu: move iommu_resume before ip init/resume

[Greg Kroah-Hartman]

From: James Zhu <James.Zhu@amd.com>

commit f02abeb0779700c308e661a412451b38962b8a0b upstream.

Separate iommu_resume from kfd_resume, and move it before
other amdgpu ip init/resume.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211277
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2220,6 +2220,10 @@ static int amdgpu_device_ip_init(struct
 	if (r)
 		goto init_failed;
 
+	r = amdgpu_amdkfd_resume_iommu(adev);
+	if (r)
+		goto init_failed;
+
 	r = amdgpu_device_ip_hw_init_phase1(adev);
 	if (r)
 		goto init_failed;
@@ -2913,6 +2917,10 @@ static int amdgpu_device_ip_resume(struc
 {
 	int r;
 
+	r = amdgpu_amdkfd_resume_iommu(adev);
+	if (r)
+		return r;
+
 	r = amdgpu_device_ip_resume_phase1(adev);
 	if (r)
 		return r;
@@ -4296,6 +4304,10 @@ static int amdgpu_do_asic_reset(struct a
 
 			if (!r) {
 				dev_info(tmp_adev->dev, "GPU reset succeeded, trying to resume\n");
+				r = amdgpu_amdkfd_resume_iommu(tmp_adev);
+				if (r)
+					goto out;
+
 				r = amdgpu_device_ip_resume_phase1(tmp_adev);
 				if (r)
 					goto out;

[PATCH 5.10 051/130] drm/amdgpu: init iommu after amdkfd device init

[Greg Kroah-Hartman]

From: Yifan Zhang <yifan1.zhang@amd.com>

commit 714d9e4574d54596973ee3b0624ee4a16264d700 upstream.

This patch is to fix clinfo failure in Raven/Picasso:

Number of platforms: 1
  Platform Profile: FULL_PROFILE
  Platform Version: OpenCL 2.2 AMD-APP (3364.0)
  Platform Name: AMD Accelerated Parallel Processing
  Platform Vendor: Advanced Micro Devices, Inc.
  Platform Extensions: cl_khr_icd cl_amd_event_callback

  Platform Name: AMD Accelerated Parallel Processing Number of devices: 0

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2220,10 +2220,6 @@ static int amdgpu_device_ip_init(struct
 	if (r)
 		goto init_failed;
 
-	r = amdgpu_amdkfd_resume_iommu(adev);
-	if (r)
-		goto init_failed;
-
 	r = amdgpu_device_ip_hw_init_phase1(adev);
 	if (r)
 		goto init_failed;
@@ -2259,6 +2255,10 @@ static int amdgpu_device_ip_init(struct
 		amdgpu_xgmi_add_device(adev);
 	amdgpu_amdkfd_device_init(adev);
 
+	r = amdgpu_amdkfd_resume_iommu(adev);
+	if (r)
+		goto init_failed;
+
 	amdgpu_fru_get_product_info(adev);
 
 init_failed:

[PATCH 5.10 052/130] drm/amdkfd: fix boot failure when iommu is disabled in Picasso.

[Greg Kroah-Hartman]

From: Yifan Zhang <yifan1.zhang@amd.com>

commit afd18180c07026f94a80ff024acef5f4159084a4 upstream.

When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2
init will fail. But this failure should not block amdgpu driver init.

Reported-by: youling <youling257@gmail.com>
Tested-by: youling <youling257@gmail.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c |    4 ----
 drivers/gpu/drm/amd/amdkfd/kfd_device.c    |    3 +++
 2 files changed, 3 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -2255,10 +2255,6 @@ static int amdgpu_device_ip_init(struct
 		amdgpu_xgmi_add_device(adev);
 	amdgpu_amdkfd_device_init(adev);
 
-	r = amdgpu_amdkfd_resume_iommu(adev);
-	if (r)
-		goto init_failed;
-
 	amdgpu_fru_get_product_info(adev);
 
 init_failed:
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c
@@ -751,6 +751,9 @@ bool kgd2kfd_device_init(struct kfd_dev
 
 	kfd_cwsr_init(kfd);
 
+	if(kgd2kfd_resume_iommu(kfd))
+		goto device_iommu_error;
+
 	if (kfd_resume(kfd))
 		goto kfd_resume_error;
 

[PATCH 5.10 053/130] wireguard: selftests: increase default dmesg log size

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 03ff1b1def73f817e196bf96ab36ac259490bd7c upstream.

The selftests currently parse the kernel log at the end to track
potential memory leaks. With these tests now reading off the end of the
buffer, due to recent optimizations, some creation messages were lost,
making the tests think that there was a free without an alloc. Fix this
by increasing the kernel log size.

Fixes: 24b70eeeb4f4 ("wireguard: use synchronize_net rather than synchronize_rcu")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/wireguard/qemu/kernel.config | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/testing/selftests/wireguard/qemu/kernel.config b/tools/testing/selftests/wireguard/qemu/kernel.config
index 74db83a0aedd..a9b5a520a1d2 100644
--- a/tools/testing/selftests/wireguard/qemu/kernel.config
+++ b/tools/testing/selftests/wireguard/qemu/kernel.config
@@ -66,6 +66,7 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_LOG_BUF_SHIFT=18
 CONFIG_PRINTK_TIME=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_LEGACY_VSYSCALL_NONE=y
-- 
2.34.1

[PATCH 5.10 054/130] wireguard: allowedips: add missing __rcu annotation to satisfy sparse

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit ae9287811ba75571cd69505d50ab0e612ace8572 upstream.

A __rcu annotation got lost during refactoring, which caused sparse to
become enraged.

Fixes: bf7b042dc62a ("wireguard: allowedips: free empty intermediate nodes when removing single node")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireguard/allowedips.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireguard/allowedips.c
+++ b/drivers/net/wireguard/allowedips.c
@@ -163,7 +163,7 @@ static bool node_placement(struct allowe
 	return exact;
 }
 
-static inline void connect_node(struct allowedips_node **parent, u8 bit, struct allowedips_node *node)
+static inline void connect_node(struct allowedips_node __rcu **parent, u8 bit, struct allowedips_node *node)
 {
 	node->parent_bit_packed = (unsigned long)parent | bit;
 	rcu_assign_pointer(*parent, node);

[PATCH 5.10 055/130] wireguard: selftests: actually test for routing loops

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 782c72af567fc2ef09bd7615d0307f24de72c7e0 upstream.

We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.

Fixes: b673e24aad36 ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/wireguard/netns.sh |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -276,7 +276,11 @@ n0 ping -W 1 -c 1 192.168.241.2
 n1 wg set wg0 peer "$pub2" endpoint 192.168.241.2:7
 ip2 link del wg0
 ip2 link del wg1
-! n0 ping -W 1 -c 10 -f 192.168.241.2 || false # Should not crash kernel
+read _ _ tx_bytes_before < <(n0 wg show wg1 transfer)
+! n0 ping -W 1 -c 10 -f 192.168.241.2 || false
+sleep 1
+read _ _ tx_bytes_after < <(n0 wg show wg1 transfer)
+(( tx_bytes_after - tx_bytes_before < 70000 ))
 
 ip0 link del wg1
 ip1 link del wg0

[PATCH 5.10 056/130] wireguard: selftests: rename DEBUG_PI_LIST to DEBUG_PLIST

[Greg Kroah-Hartman]

From: Li Zhijian <lizhijian@cn.fujitsu.com>

commit 7e938beb8321d34f040557b8915b228af125f73c upstream.

DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").

Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 8e18faeac3e4 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/wireguard/qemu/debug.config |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/wireguard/qemu/debug.config
+++ b/tools/testing/selftests/wireguard/qemu/debug.config
@@ -48,7 +48,7 @@ CONFIG_DEBUG_ATOMIC_SLEEP=y
 CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PI_LIST=y
+CONFIG_DEBUG_PLIST=y
 CONFIG_PROVE_RCU=y
 CONFIG_SPARSE_RCU_POINTER=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=21

[PATCH 5.10 057/130] wireguard: device: reset peer src endpoint when netns exits

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 20ae1d6aa159eb91a9bf09ff92ccaa94dbea92c2 upstream.

Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.

However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.

This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.

Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireguard/device.c             |    3 +++
 drivers/net/wireguard/socket.c             |    2 +-
 include/net/dst_cache.h                    |   11 +++++++++++
 net/core/dst_cache.c                       |   19 +++++++++++++++++++
 tools/testing/selftests/wireguard/netns.sh |   24 +++++++++++++++++++++++-
 5 files changed, 57 insertions(+), 2 deletions(-)

--- a/drivers/net/wireguard/device.c
+++ b/drivers/net/wireguard/device.c
@@ -398,6 +398,7 @@ static struct rtnl_link_ops link_ops __r
 static void wg_netns_pre_exit(struct net *net)
 {
 	struct wg_device *wg;
+	struct wg_peer *peer;
 
 	rtnl_lock();
 	list_for_each_entry(wg, &device_list, device_list) {
@@ -407,6 +408,8 @@ static void wg_netns_pre_exit(struct net
 			mutex_lock(&wg->device_update_lock);
 			rcu_assign_pointer(wg->creating_net, NULL);
 			wg_socket_reinit(wg, NULL, NULL);
+			list_for_each_entry(peer, &wg->peer_list, peer_list)
+				wg_socket_clear_peer_endpoint_src(peer);
 			mutex_unlock(&wg->device_update_lock);
 		}
 	}
--- a/drivers/net/wireguard/socket.c
+++ b/drivers/net/wireguard/socket.c
@@ -308,7 +308,7 @@ void wg_socket_clear_peer_endpoint_src(s
 {
 	write_lock_bh(&peer->endpoint_lock);
 	memset(&peer->endpoint.src6, 0, sizeof(peer->endpoint.src6));
-	dst_cache_reset(&peer->endpoint_cache);
+	dst_cache_reset_now(&peer->endpoint_cache);
 	write_unlock_bh(&peer->endpoint_lock);
 }
 
--- a/include/net/dst_cache.h
+++ b/include/net/dst_cache.h
@@ -80,6 +80,17 @@ static inline void dst_cache_reset(struc
 }
 
 /**
+ *	dst_cache_reset_now - invalidate the cache contents immediately
+ *	@dst_cache: the cache
+ *
+ *	The caller must be sure there are no concurrent users, as this frees
+ *	all dst_cache users immediately, rather than waiting for the next
+ *	per-cpu usage like dst_cache_reset does. Most callers should use the
+ *	higher speed lazily-freed dst_cache_reset function instead.
+ */
+void dst_cache_reset_now(struct dst_cache *dst_cache);
+
+/**
  *	dst_cache_init - initialize the cache, allocating the required storage
  *	@dst_cache: the cache
  *	@gfp: allocation flags
--- a/net/core/dst_cache.c
+++ b/net/core/dst_cache.c
@@ -162,3 +162,22 @@ void dst_cache_destroy(struct dst_cache
 	free_percpu(dst_cache->cache);
 }
 EXPORT_SYMBOL_GPL(dst_cache_destroy);
+
+void dst_cache_reset_now(struct dst_cache *dst_cache)
+{
+	int i;
+
+	if (!dst_cache->cache)
+		return;
+
+	dst_cache->reset_ts = jiffies;
+	for_each_possible_cpu(i) {
+		struct dst_cache_pcpu *idst = per_cpu_ptr(dst_cache->cache, i);
+		struct dst_entry *dst = idst->dst;
+
+		idst->cookie = 0;
+		idst->dst = NULL;
+		dst_release(dst);
+	}
+}
+EXPORT_SYMBOL_GPL(dst_cache_reset_now);
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -613,6 +613,28 @@ ip0 link set wg0 up
 kill $ncat_pid
 ip0 link del wg0
 
+# Ensure that dst_cache references don't outlive netns lifetime
+ip1 link add dev wg0 type wireguard
+ip2 link add dev wg0 type wireguard
+configure_peers
+ip1 link add veth1 type veth peer name veth2
+ip1 link set veth2 netns $netns2
+ip1 addr add fd00:aa::1/64 dev veth1
+ip2 addr add fd00:aa::2/64 dev veth2
+ip1 link set veth1 up
+ip2 link set veth2 up
+waitiface $netns1 veth1
+waitiface $netns2 veth2
+ip1 -6 route add default dev veth1 via fd00:aa::2
+ip2 -6 route add default dev veth2 via fd00:aa::1
+n1 wg set wg0 peer "$pub2" endpoint [fd00:aa::2]:2
+n2 wg set wg0 peer "$pub1" endpoint [fd00:aa::1]:1
+n1 ping6 -c 1 fd00::2
+pp ip netns delete $netns1
+pp ip netns delete $netns2
+pp ip netns add $netns1
+pp ip netns add $netns2
+
 # Ensure there aren't circular reference loops
 ip1 link add wg1 type wireguard
 ip2 link add wg2 type wireguard
@@ -631,7 +653,7 @@ while read -t 0.1 -r line 2>/dev/null ||
 done < /dev/kmsg
 alldeleted=1
 for object in "${!objects[@]}"; do
-	if [[ ${objects["$object"]} != *createddestroyed ]]; then
+	if [[ ${objects["$object"]} != *createddestroyed && ${objects["$object"]} != *createdcreateddestroyeddestroyed ]]; then
 		echo "Error: $object: merely ${objects["$object"]}" >&3
 		alldeleted=0
 	fi

[PATCH 5.10 058/130] wireguard: receive: use ring buffer for incoming handshakes

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 886fcee939adb5e2af92741b90643a59f2b54f97 upstream.

Apparently the spinlock on incoming_handshake's skb_queue is highly
contended, and a torrent of handshake or cookie packets can bring the
data plane to its knees, simply by virtue of enqueueing the handshake
packets to be processed asynchronously. So, we try switching this to a
ring buffer to hopefully have less lock contention. This alleviates the
problem somewhat, though it still isn't perfect, so future patches will
have to improve this further. However, it at least doesn't completely
diminish the data plane.

Reported-by: Streun Fabio <fstreun@student.ethz.ch>
Reported-by: Joel Wanner <joel.wanner@inf.ethz.ch>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireguard/device.c   |   36 ++++++++++++++++++------------------
 drivers/net/wireguard/device.h   |    9 +++------
 drivers/net/wireguard/queueing.c |    6 +++---
 drivers/net/wireguard/queueing.h |    2 +-
 drivers/net/wireguard/receive.c  |   27 ++++++++++++---------------
 5 files changed, 37 insertions(+), 43 deletions(-)

--- a/drivers/net/wireguard/device.c
+++ b/drivers/net/wireguard/device.c
@@ -98,6 +98,7 @@ static int wg_stop(struct net_device *de
 {
 	struct wg_device *wg = netdev_priv(dev);
 	struct wg_peer *peer;
+	struct sk_buff *skb;
 
 	mutex_lock(&wg->device_update_lock);
 	list_for_each_entry(peer, &wg->peer_list, peer_list) {
@@ -108,7 +109,9 @@ static int wg_stop(struct net_device *de
 		wg_noise_reset_last_sent_handshake(&peer->last_sent_handshake);
 	}
 	mutex_unlock(&wg->device_update_lock);
-	skb_queue_purge(&wg->incoming_handshakes);
+	while ((skb = ptr_ring_consume(&wg->handshake_queue.ring)) != NULL)
+		kfree_skb(skb);
+	atomic_set(&wg->handshake_queue_len, 0);
 	wg_socket_reinit(wg, NULL, NULL);
 	return 0;
 }
@@ -235,14 +238,13 @@ static void wg_destruct(struct net_devic
 	destroy_workqueue(wg->handshake_receive_wq);
 	destroy_workqueue(wg->handshake_send_wq);
 	destroy_workqueue(wg->packet_crypt_wq);
-	wg_packet_queue_free(&wg->decrypt_queue);
-	wg_packet_queue_free(&wg->encrypt_queue);
+	wg_packet_queue_free(&wg->handshake_queue, true);
+	wg_packet_queue_free(&wg->decrypt_queue, false);
+	wg_packet_queue_free(&wg->encrypt_queue, false);
 	rcu_barrier(); /* Wait for all the peers to be actually freed. */
 	wg_ratelimiter_uninit();
 	memzero_explicit(&wg->static_identity, sizeof(wg->static_identity));
-	skb_queue_purge(&wg->incoming_handshakes);
 	free_percpu(dev->tstats);
-	free_percpu(wg->incoming_handshakes_worker);
 	kvfree(wg->index_hashtable);
 	kvfree(wg->peer_hashtable);
 	mutex_unlock(&wg->device_update_lock);
@@ -298,7 +300,6 @@ static int wg_newlink(struct net *src_ne
 	init_rwsem(&wg->static_identity.lock);
 	mutex_init(&wg->socket_update_lock);
 	mutex_init(&wg->device_update_lock);
-	skb_queue_head_init(&wg->incoming_handshakes);
 	wg_allowedips_init(&wg->peer_allowedips);
 	wg_cookie_checker_init(&wg->cookie_checker, wg);
 	INIT_LIST_HEAD(&wg->peer_list);
@@ -316,16 +317,10 @@ static int wg_newlink(struct net *src_ne
 	if (!dev->tstats)
 		goto err_free_index_hashtable;
 
-	wg->incoming_handshakes_worker =
-		wg_packet_percpu_multicore_worker_alloc(
-				wg_packet_handshake_receive_worker, wg);
-	if (!wg->incoming_handshakes_worker)
-		goto err_free_tstats;
-
 	wg->handshake_receive_wq = alloc_workqueue("wg-kex-%s",
 			WQ_CPU_INTENSIVE | WQ_FREEZABLE, 0, dev->name);
 	if (!wg->handshake_receive_wq)
-		goto err_free_incoming_handshakes;
+		goto err_free_tstats;
 
 	wg->handshake_send_wq = alloc_workqueue("wg-kex-%s",
 			WQ_UNBOUND | WQ_FREEZABLE, 0, dev->name);
@@ -347,10 +342,15 @@ static int wg_newlink(struct net *src_ne
 	if (ret < 0)
 		goto err_free_encrypt_queue;
 
-	ret = wg_ratelimiter_init();
+	ret = wg_packet_queue_init(&wg->handshake_queue, wg_packet_handshake_receive_worker,
+				   MAX_QUEUED_INCOMING_HANDSHAKES);
 	if (ret < 0)
 		goto err_free_decrypt_queue;
 
+	ret = wg_ratelimiter_init();
+	if (ret < 0)
+		goto err_free_handshake_queue;
+
 	ret = register_netdevice(dev);
 	if (ret < 0)
 		goto err_uninit_ratelimiter;
@@ -367,18 +367,18 @@ static int wg_newlink(struct net *src_ne
 
 err_uninit_ratelimiter:
 	wg_ratelimiter_uninit();
+err_free_handshake_queue:
+	wg_packet_queue_free(&wg->handshake_queue, false);
 err_free_decrypt_queue:
-	wg_packet_queue_free(&wg->decrypt_queue);
+	wg_packet_queue_free(&wg->decrypt_queue, false);
 err_free_encrypt_queue:
-	wg_packet_queue_free(&wg->encrypt_queue);
+	wg_packet_queue_free(&wg->encrypt_queue, false);
 err_destroy_packet_crypt:
 	destroy_workqueue(wg->packet_crypt_wq);
 err_destroy_handshake_send:
 	destroy_workqueue(wg->handshake_send_wq);
 err_destroy_handshake_receive:
 	destroy_workqueue(wg->handshake_receive_wq);
-err_free_incoming_handshakes:
-	free_percpu(wg->incoming_handshakes_worker);
 err_free_tstats:
 	free_percpu(dev->tstats);
 err_free_index_hashtable:
--- a/drivers/net/wireguard/device.h
+++ b/drivers/net/wireguard/device.h
@@ -39,21 +39,18 @@ struct prev_queue {
 
 struct wg_device {
 	struct net_device *dev;
-	struct crypt_queue encrypt_queue, decrypt_queue;
+	struct crypt_queue encrypt_queue, decrypt_queue, handshake_queue;
 	struct sock __rcu *sock4, *sock6;
 	struct net __rcu *creating_net;
 	struct noise_static_identity static_identity;
-	struct workqueue_struct *handshake_receive_wq, *handshake_send_wq;
-	struct workqueue_struct *packet_crypt_wq;
-	struct sk_buff_head incoming_handshakes;
-	int incoming_handshake_cpu;
-	struct multicore_worker __percpu *incoming_handshakes_worker;
+	struct workqueue_struct *packet_crypt_wq,*handshake_receive_wq, *handshake_send_wq;
 	struct cookie_checker cookie_checker;
 	struct pubkey_hashtable *peer_hashtable;
 	struct index_hashtable *index_hashtable;
 	struct allowedips peer_allowedips;
 	struct mutex device_update_lock, socket_update_lock;
 	struct list_head device_list, peer_list;
+	atomic_t handshake_queue_len;
 	unsigned int num_peers, device_update_gen;
 	u32 fwmark;
 	u16 incoming_port;
--- a/drivers/net/wireguard/queueing.c
+++ b/drivers/net/wireguard/queueing.c
@@ -38,11 +38,11 @@ int wg_packet_queue_init(struct crypt_qu
 	return 0;
 }
 
-void wg_packet_queue_free(struct crypt_queue *queue)
+void wg_packet_queue_free(struct crypt_queue *queue, bool purge)
 {
 	free_percpu(queue->worker);
-	WARN_ON(!__ptr_ring_empty(&queue->ring));
-	ptr_ring_cleanup(&queue->ring, NULL);
+	WARN_ON(!purge && !__ptr_ring_empty(&queue->ring));
+	ptr_ring_cleanup(&queue->ring, purge ? (void(*)(void*))kfree_skb : NULL);
 }
 
 #define NEXT(skb) ((skb)->prev)
--- a/drivers/net/wireguard/queueing.h
+++ b/drivers/net/wireguard/queueing.h
@@ -23,7 +23,7 @@ struct sk_buff;
 /* queueing.c APIs: */
 int wg_packet_queue_init(struct crypt_queue *queue, work_func_t function,
 			 unsigned int len);
-void wg_packet_queue_free(struct crypt_queue *queue);
+void wg_packet_queue_free(struct crypt_queue *queue, bool purge);
 struct multicore_worker __percpu *
 wg_packet_percpu_multicore_worker_alloc(work_func_t function, void *ptr);
 
--- a/drivers/net/wireguard/receive.c
+++ b/drivers/net/wireguard/receive.c
@@ -116,8 +116,8 @@ static void wg_receive_handshake_packet(
 		return;
 	}
 
-	under_load = skb_queue_len(&wg->incoming_handshakes) >=
-		     MAX_QUEUED_INCOMING_HANDSHAKES / 8;
+	under_load = atomic_read(&wg->handshake_queue_len) >=
+			MAX_QUEUED_INCOMING_HANDSHAKES / 8;
 	if (under_load) {
 		last_under_load = ktime_get_coarse_boottime_ns();
 	} else if (last_under_load) {
@@ -212,13 +212,14 @@ static void wg_receive_handshake_packet(
 
 void wg_packet_handshake_receive_worker(struct work_struct *work)
 {
-	struct wg_device *wg = container_of(work, struct multicore_worker,
-					    work)->ptr;
+	struct crypt_queue *queue = container_of(work, struct multicore_worker, work)->ptr;
+	struct wg_device *wg = container_of(queue, struct wg_device, handshake_queue);
 	struct sk_buff *skb;
 
-	while ((skb = skb_dequeue(&wg->incoming_handshakes)) != NULL) {
+	while ((skb = ptr_ring_consume_bh(&queue->ring)) != NULL) {
 		wg_receive_handshake_packet(wg, skb);
 		dev_kfree_skb(skb);
+		atomic_dec(&wg->handshake_queue_len);
 		cond_resched();
 	}
 }
@@ -554,21 +555,17 @@ void wg_packet_receive(struct wg_device
 	case cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE):
 	case cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE): {
 		int cpu;
-
-		if (skb_queue_len(&wg->incoming_handshakes) >
-			    MAX_QUEUED_INCOMING_HANDSHAKES ||
-		    unlikely(!rng_is_initialized())) {
+		if (unlikely(!rng_is_initialized() ||
+			     ptr_ring_produce_bh(&wg->handshake_queue.ring, skb))) {
 			net_dbg_skb_ratelimited("%s: Dropping handshake packet from %pISpfsc\n",
 						wg->dev->name, skb);
 			goto err;
 		}
-		skb_queue_tail(&wg->incoming_handshakes, skb);
-		/* Queues up a call to packet_process_queued_handshake_
-		 * packets(skb):
-		 */
-		cpu = wg_cpumask_next_online(&wg->incoming_handshake_cpu);
+		atomic_inc(&wg->handshake_queue_len);
+		cpu = wg_cpumask_next_online(&wg->handshake_queue.last_cpu);
+		/* Queues up a call to packet_process_queued_handshake_packets(skb): */
 		queue_work_on(cpu, wg->handshake_receive_wq,
-			&per_cpu_ptr(wg->incoming_handshakes_worker, cpu)->work);
+			      &per_cpu_ptr(wg->handshake_queue.worker, cpu)->work);
 		break;
 	}
 	case cpu_to_le32(MESSAGE_DATA):

[PATCH 5.10 059/130] wireguard: receive: drop handshakes if queue lock is contended

[Greg Kroah-Hartman]

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit fb32f4f606c17b869805d7cede8b03d78339b50a upstream.

If we're being delivered packets from multiple CPUs so quickly that the
ring lock is contended for CPU tries, then it's safe to assume that the
queue is near capacity anyway, so just drop the packet rather than
spinning. This helps deal with multicore DoS that can interfere with
data path performance. It _still_ does not completely fix the issue, but
it again chips away at it.

Reported-by: Streun Fabio <fstreun@student.ethz.ch>
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireguard/receive.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/net/wireguard/receive.c
+++ b/drivers/net/wireguard/receive.c
@@ -554,9 +554,19 @@ void wg_packet_receive(struct wg_device
 	case cpu_to_le32(MESSAGE_HANDSHAKE_INITIATION):
 	case cpu_to_le32(MESSAGE_HANDSHAKE_RESPONSE):
 	case cpu_to_le32(MESSAGE_HANDSHAKE_COOKIE): {
-		int cpu;
-		if (unlikely(!rng_is_initialized() ||
-			     ptr_ring_produce_bh(&wg->handshake_queue.ring, skb))) {
+		int cpu, ret = -EBUSY;
+
+		if (unlikely(!rng_is_initialized()))
+			goto drop;
+		if (atomic_read(&wg->handshake_queue_len) > MAX_QUEUED_INCOMING_HANDSHAKES / 2) {
+			if (spin_trylock_bh(&wg->handshake_queue.ring.producer_lock)) {
+				ret = __ptr_ring_produce(&wg->handshake_queue.ring, skb);
+				spin_unlock_bh(&wg->handshake_queue.ring.producer_lock);
+			}
+		} else
+			ret = ptr_ring_produce_bh(&wg->handshake_queue.ring, skb);
+		if (ret) {
+	drop:
 			net_dbg_skb_ratelimited("%s: Dropping handshake packet from %pISpfsc\n",
 						wg->dev->name, skb);
 			goto err;

[PATCH 5.10 060/130] wireguard: ratelimiter: use kvcalloc() instead of kvzalloc()

[Greg Kroah-Hartman]

From: Gustavo A. R. Silva <gustavoars@kernel.org>

commit 4e3fd721710553832460c179c2ee5ce67ef7f1e0 upstream.

Use 2-factor argument form kvcalloc() instead of kvzalloc().

Link: https://github.com/KSPP/linux/issues/162
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[Jason: Gustavo's link above is for KSPP, but this isn't actually a
 security fix, as table_size is bounded to 8192 anyway, and gcc realizes
 this, so the codegen comes out to be about the same.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireguard/ratelimiter.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireguard/ratelimiter.c
+++ b/drivers/net/wireguard/ratelimiter.c
@@ -176,12 +176,12 @@ int wg_ratelimiter_init(void)
 			(1U << 14) / sizeof(struct hlist_head)));
 	max_entries = table_size * 8;
 
-	table_v4 = kvzalloc(table_size * sizeof(*table_v4), GFP_KERNEL);
+	table_v4 = kvcalloc(table_size, sizeof(*table_v4), GFP_KERNEL);
 	if (unlikely(!table_v4))
 		goto err_kmemcache;
 
 #if IS_ENABLED(CONFIG_IPV6)
-	table_v6 = kvzalloc(table_size * sizeof(*table_v6), GFP_KERNEL);
+	table_v6 = kvcalloc(table_size, sizeof(*table_v6), GFP_KERNEL);
 	if (unlikely(!table_v6)) {
 		kvfree(table_v4);
 		goto err_kmemcache;

[PATCH 5.10 061/130] i2c: stm32f7: flush TX FIFO upon transfer errors

[Greg Kroah-Hartman]

From: Alain Volmat <alain.volmat@foss.st.com>

commit 0c21d02ca469574d2082379db52d1a27b99eed0c upstream.

While handling an error during transfer (ex: NACK), it could
happen that the driver has already written data into TXDR
before the transfer get stopped.
This commit add TXDR Flush after end of transfer in case of error to
avoid sending a wrong data on any other slave upon next transfer.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-stm32f7.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1665,6 +1665,16 @@ static int stm32f7_i2c_xfer(struct i2c_a
 	time_left = wait_for_completion_timeout(&i2c_dev->complete,
 						i2c_dev->adap.timeout);
 	ret = f7_msg->result;
+	if (ret) {
+		/*
+		 * It is possible that some unsent data have already been
+		 * written into TXDR. To avoid sending old data in a
+		 * further transfer, flush TXDR in case of any error
+		 */
+		writel_relaxed(STM32F7_I2C_ISR_TXE,
+			       i2c_dev->base + STM32F7_I2C_ISR);
+		goto pm_free;
+	}
 
 	if (!time_left) {
 		dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n",
@@ -1713,8 +1723,16 @@ static int stm32f7_i2c_smbus_xfer(struct
 	timeout = wait_for_completion_timeout(&i2c_dev->complete,
 					      i2c_dev->adap.timeout);
 	ret = f7_msg->result;
-	if (ret)
+	if (ret) {
+		/*
+		 * It is possible that some unsent data have already been
+		 * written into TXDR. To avoid sending old data in a
+		 * further transfer, flush TXDR in case of any error
+		 */
+		writel_relaxed(STM32F7_I2C_ISR_TXE,
+			       i2c_dev->base + STM32F7_I2C_ISR);
 		goto pm_free;
+	}
 
 	if (!timeout) {
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);

[PATCH 5.10 062/130] i2c: stm32f7: recover the bus on access timeout

[Greg Kroah-Hartman]

From: Alain Volmat <alain.volmat@foss.st.com>

commit b933d1faf8fa30d16171bcff404e39c41b2a7c84 upstream.

When getting an access timeout, ensure that the bus is in a proper
state prior to returning the error.

Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-stm32f7.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1681,6 +1681,7 @@ static int stm32f7_i2c_xfer(struct i2c_a
 			i2c_dev->msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_all(dma->chan_using);
+		stm32f7_i2c_wait_free_bus(i2c_dev);
 		ret = -ETIMEDOUT;
 	}
 
@@ -1738,6 +1739,7 @@ static int stm32f7_i2c_smbus_xfer(struct
 		dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);
 		if (i2c_dev->use_dma)
 			dmaengine_terminate_all(dma->chan_using);
+		stm32f7_i2c_wait_free_bus(i2c_dev);
 		ret = -ETIMEDOUT;
 		goto pm_free;
 	}

[PATCH 5.10 063/130] i2c: stm32f7: stop dma transfer in case of NACK

[Greg Kroah-Hartman]

From: Alain Volmat <alain.volmat@foss.st.com>

commit 31b90a95ccbbb4b628578ac17e3b3cc8eeacfe31 upstream.

In case of receiving a NACK, the dma transfer should be stopped
to avoid feeding data into the FIFO.
Also ensure to properly return the proper error code and avoid
waiting for the end of the dma completion in case of
error happening during the transmission.

Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-stm32f7.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1472,6 +1472,7 @@ static irqreturn_t stm32f7_i2c_isr_event
 {
 	struct stm32f7_i2c_dev *i2c_dev = data;
 	struct stm32f7_i2c_msg *f7_msg = &i2c_dev->f7_msg;
+	struct stm32_i2c_dma *dma = i2c_dev->dma;
 	void __iomem *base = i2c_dev->base;
 	u32 status, mask;
 	int ret = IRQ_HANDLED;
@@ -1497,6 +1498,10 @@ static irqreturn_t stm32f7_i2c_isr_event
 		dev_dbg(i2c_dev->dev, "<%s>: Receive NACK (addr %x)\n",
 			__func__, f7_msg->addr);
 		writel_relaxed(STM32F7_I2C_ICR_NACKCF, base + STM32F7_I2C_ICR);
+		if (i2c_dev->use_dma) {
+			stm32f7_i2c_disable_dma_req(i2c_dev);
+			dmaengine_terminate_all(dma->chan_using);
+		}
 		f7_msg->result = -ENXIO;
 	}
 
@@ -1512,7 +1517,7 @@ static irqreturn_t stm32f7_i2c_isr_event
 		/* Clear STOP flag */
 		writel_relaxed(STM32F7_I2C_ICR_STOPCF, base + STM32F7_I2C_ICR);
 
-		if (i2c_dev->use_dma) {
+		if (i2c_dev->use_dma && !f7_msg->result) {
 			ret = IRQ_WAKE_THREAD;
 		} else {
 			i2c_dev->master_mode = false;
@@ -1525,7 +1530,7 @@ static irqreturn_t stm32f7_i2c_isr_event
 		if (f7_msg->stop) {
 			mask = STM32F7_I2C_CR2_STOP;
 			stm32f7_i2c_set_bits(base + STM32F7_I2C_CR2, mask);
-		} else if (i2c_dev->use_dma) {
+		} else if (i2c_dev->use_dma && !f7_msg->result) {
 			ret = IRQ_WAKE_THREAD;
 		} else if (f7_msg->smbus) {
 			stm32f7_i2c_smbus_rep_start(i2c_dev);

[PATCH 5.10 064/130] i2c: cbus-gpio: set atomic transfer callback

[Greg Kroah-Hartman]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

commit b12764695c3fcade145890b67f82f8b139174cc7 upstream.

CBUS transfers have always been atomic, but after commit 63b96983a5dd
("i2c: core: introduce callbacks for atomic transfers") we started to see
warnings during e.g. poweroff as the atomic callback is not explicitly set.
Fix that.

Fixes the following WARNING seen during Nokia N810 power down:

[  786.570617] reboot: Power down
[  786.573913] ------------[ cut here ]------------
[  786.578826] WARNING: CPU: 0 PID: 672 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x110
[  786.587799] No atomic I2C transfer handler for 'i2c-2'

Fixes: 63b96983a5dd ("i2c: core: introduce callbacks for atomic transfers")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/i2c/busses/i2c-cbus-gpio.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -195,8 +195,9 @@ static u32 cbus_i2c_func(struct i2c_adap
 }
 
 static const struct i2c_algorithm cbus_i2c_algo = {
-	.smbus_xfer	= cbus_i2c_smbus_xfer,
-	.functionality	= cbus_i2c_func,
+	.smbus_xfer		= cbus_i2c_smbus_xfer,
+	.smbus_xfer_atomic	= cbus_i2c_smbus_xfer,
+	.functionality		= cbus_i2c_func,
 };
 
 static int cbus_i2c_remove(struct platform_device *pdev)

[PATCH 5.10 065/130] natsemi: xtensa: fix section mismatch warnings

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

commit b0f38e15979fa8851e88e8aa371367f264e7b6e9 upstream.

Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.

WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.

WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.

Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Finn Thain <fthain@telegraphics.com.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/natsemi/xtsonic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/natsemi/xtsonic.c
+++ b/drivers/net/ethernet/natsemi/xtsonic.c
@@ -120,7 +120,7 @@ static const struct net_device_ops xtson
 	.ndo_set_mac_address	= eth_mac_addr,
 };
 
-static int __init sonic_probe1(struct net_device *dev)
+static int sonic_probe1(struct net_device *dev)
 {
 	unsigned int silicon_revision;
 	struct sonic_local *lp = netdev_priv(dev);

[PATCH 5.10 066/130] tcp: fix page frag corruption on page fault

[Greg Kroah-Hartman]

From: Paolo Abeni <pabeni@redhat.com>

commit dacb5d8875cc6cd3a553363b4d6f06760fcbe70c upstream.

Steffen reported a TCP stream corruption for HTTP requests
served by the apache web-server using a cifs mount-point
and memory mapping the relevant file.

The root cause is quite similar to the one addressed by
commit 20eb4f29b602 ("net: fix sk_page_frag() recursion from
memory reclaim"). Here the nested access to the task page frag
is caused by a page fault on the (mmapped) user-space memory
buffer coming from the cifs file.

The page fault handler performs an smb transaction on a different
socket, inside the same process context. Since sk->sk_allaction
for such socket does not prevent the usage for the task_frag,
the nested allocation modify "under the hood" the page frag
in use by the outer sendmsg call, corrupting the stream.

The overall relevant stack trace looks like the following:

httpd 78268 [001] 3461630.850950:      probe:tcp_sendmsg_locked:
        ffffffff91461d91 tcp_sendmsg_locked+0x1
        ffffffff91462b57 tcp_sendmsg+0x27
        ffffffff9139814e sock_sendmsg+0x3e
        ffffffffc06dfe1d smb_send_kvec+0x28
        [...]
        ffffffffc06cfaf8 cifs_readpages+0x213
        ffffffff90e83c4b read_pages+0x6b
        ffffffff90e83f31 __do_page_cache_readahead+0x1c1
        ffffffff90e79e98 filemap_fault+0x788
        ffffffff90eb0458 __do_fault+0x38
        ffffffff90eb5280 do_fault+0x1a0
        ffffffff90eb7c84 __handle_mm_fault+0x4d4
        ffffffff90eb8093 handle_mm_fault+0xc3
        ffffffff90c74f6d __do_page_fault+0x1ed
        ffffffff90c75277 do_page_fault+0x37
        ffffffff9160111e page_fault+0x1e
        ffffffff9109e7b5 copyin+0x25
        ffffffff9109eb40 _copy_from_iter_full+0xe0
        ffffffff91462370 tcp_sendmsg_locked+0x5e0
        ffffffff91462370 tcp_sendmsg_locked+0x5e0
        ffffffff91462b57 tcp_sendmsg+0x27
        ffffffff9139815c sock_sendmsg+0x4c
        ffffffff913981f7 sock_write_iter+0x97
        ffffffff90f2cc56 do_iter_readv_writev+0x156
        ffffffff90f2dff0 do_iter_write+0x80
        ffffffff90f2e1c3 vfs_writev+0xa3
        ffffffff90f2e27c do_writev+0x5c
        ffffffff90c042bb do_syscall_64+0x5b
        ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65

The cifs filesystem rightfully sets sk_allocations to GFP_NOFS,
we can avoid the nesting using the sk page frag for allocation
lacking the __GFP_FS flag. Do not define an additional mm-helper
for that, as this is strictly tied to the sk page frag usage.

v1 -> v2:
 - use a stricted sk_page_frag() check instead of reordering the
   code (Eric)

Reported-by: Steffen Froemer <sfroemer@redhat.com>
Fixes: 5640f7685831 ("net: use a per task frag allocator")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sock.h |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2322,19 +2322,22 @@ struct sk_buff *sk_stream_alloc_skb(stru
  * @sk: socket
  *
  * Use the per task page_frag instead of the per socket one for
- * optimization when we know that we're in the normal context and owns
+ * optimization when we know that we're in process context and own
  * everything that's associated with %current.
  *
- * gfpflags_allow_blocking() isn't enough here as direct reclaim may nest
- * inside other socket operations and end up recursing into sk_page_frag()
- * while it's already in use.
+ * Both direct reclaim and page faults can nest inside other
+ * socket operations and end up recursing into sk_page_frag()
+ * while it's already in use: explicitly avoid task page_frag
+ * usage if the caller is potentially doing any of them.
+ * This assumes that page fault handlers use the GFP_NOFS flags.
  *
  * Return: a per task page_frag if context allows that,
  * otherwise a per socket one.
  */
 static inline struct page_frag *sk_page_frag(struct sock *sk)
 {
-	if (gfpflags_normal_context(sk->sk_allocation))
+	if ((sk->sk_allocation & (__GFP_DIRECT_RECLAIM | __GFP_MEMALLOC | __GFP_FS)) ==
+	    (__GFP_DIRECT_RECLAIM | __GFP_FS))
 		return &current->task_frag;
 
 	return &sk->sk_frag;

[PATCH 5.10 067/130] net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

commit e2dabc4f7e7b60299c20a36d6a7b24ed9bf8e572 upstream.

In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().

Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.

Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
@@ -1077,8 +1077,14 @@ static int qlcnic_83xx_add_rings(struct
 	sds_mbx_size = sizeof(struct qlcnic_sds_mbx);
 	context_id = recv_ctx->context_id;
 	num_sds = adapter->drv_sds_rings - QLCNIC_MAX_SDS_RINGS;
-	ahw->hw_ops->alloc_mbx_args(&cmd, adapter,
-				    QLCNIC_CMD_ADD_RCV_RINGS);
+	err = ahw->hw_ops->alloc_mbx_args(&cmd, adapter,
+					QLCNIC_CMD_ADD_RCV_RINGS);
+	if (err) {
+		dev_err(&adapter->pdev->dev,
+			"Failed to alloc mbx args %d\n", err);
+		return err;
+	}
+
 	cmd.req.arg[1] = 0 | (num_sds << 8) | (context_id << 16);
 
 	/* set up status rings, mbx 2-81 */

[PATCH 5.10 068/130] net: mpls: Fix notifications when deleting a device

[Greg Kroah-Hartman]

From: Benjamin Poirier <bpoirier@nvidia.com>

commit 7d4741eacdefa5f0475431645b56baf00784df1f upstream.

There are various problems related to netlink notifications for mpls route
changes in response to interfaces being deleted:
* delete interface of only nexthop
	DELROUTE notification is missing RTA_OIF attribute
* delete interface of non-last nexthop
	NEWROUTE notification is missing entirely
* delete interface of last nexthop
	DELROUTE notification is missing nexthop

All of these problems stem from the fact that existing routes are modified
in-place before sending a notification. Restructure mpls_ifdown() to avoid
changing the route in the DELROUTE cases and to create a copy in the
NEWROUTE case.

Fixes: f8efb73c97e2 ("mpls: multipath route support")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/mpls/af_mpls.c |   68 ++++++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 52 insertions(+), 16 deletions(-)

--- a/net/mpls/af_mpls.c
+++ b/net/mpls/af_mpls.c
@@ -1490,22 +1490,52 @@ static void mpls_dev_destroy_rcu(struct
 	kfree(mdev);
 }
 
-static void mpls_ifdown(struct net_device *dev, int event)
+static int mpls_ifdown(struct net_device *dev, int event)
 {
 	struct mpls_route __rcu **platform_label;
 	struct net *net = dev_net(dev);
-	u8 alive, deleted;
 	unsigned index;
 
 	platform_label = rtnl_dereference(net->mpls.platform_label);
 	for (index = 0; index < net->mpls.platform_labels; index++) {
 		struct mpls_route *rt = rtnl_dereference(platform_label[index]);
+		bool nh_del = false;
+		u8 alive = 0;
 
 		if (!rt)
 			continue;
 
-		alive = 0;
-		deleted = 0;
+		if (event == NETDEV_UNREGISTER) {
+			u8 deleted = 0;
+
+			for_nexthops(rt) {
+				struct net_device *nh_dev =
+					rtnl_dereference(nh->nh_dev);
+
+				if (!nh_dev || nh_dev == dev)
+					deleted++;
+				if (nh_dev == dev)
+					nh_del = true;
+			} endfor_nexthops(rt);
+
+			/* if there are no more nexthops, delete the route */
+			if (deleted == rt->rt_nhn) {
+				mpls_route_update(net, index, NULL, NULL);
+				continue;
+			}
+
+			if (nh_del) {
+				size_t size = sizeof(*rt) + rt->rt_nhn *
+					rt->rt_nh_size;
+				struct mpls_route *orig = rt;
+
+				rt = kmalloc(size, GFP_KERNEL);
+				if (!rt)
+					return -ENOMEM;
+				memcpy(rt, orig, size);
+			}
+		}
+
 		change_nexthops(rt) {
 			unsigned int nh_flags = nh->nh_flags;
 
@@ -1529,16 +1559,15 @@ static void mpls_ifdown(struct net_devic
 next:
 			if (!(nh_flags & (RTNH_F_DEAD | RTNH_F_LINKDOWN)))
 				alive++;
-			if (!rtnl_dereference(nh->nh_dev))
-				deleted++;
 		} endfor_nexthops(rt);
 
 		WRITE_ONCE(rt->rt_nhn_alive, alive);
 
-		/* if there are no more nexthops, delete the route */
-		if (event == NETDEV_UNREGISTER && deleted == rt->rt_nhn)
-			mpls_route_update(net, index, NULL, NULL);
+		if (nh_del)
+			mpls_route_update(net, index, rt, NULL);
 	}
+
+	return 0;
 }
 
 static void mpls_ifup(struct net_device *dev, unsigned int flags)
@@ -1596,8 +1625,12 @@ static int mpls_dev_notify(struct notifi
 		return NOTIFY_OK;
 
 	switch (event) {
+		int err;
+
 	case NETDEV_DOWN:
-		mpls_ifdown(dev, event);
+		err = mpls_ifdown(dev, event);
+		if (err)
+			return notifier_from_errno(err);
 		break;
 	case NETDEV_UP:
 		flags = dev_get_flags(dev);
@@ -1608,13 +1641,18 @@ static int mpls_dev_notify(struct notifi
 		break;
 	case NETDEV_CHANGE:
 		flags = dev_get_flags(dev);
-		if (flags & (IFF_RUNNING | IFF_LOWER_UP))
+		if (flags & (IFF_RUNNING | IFF_LOWER_UP)) {
 			mpls_ifup(dev, RTNH_F_DEAD | RTNH_F_LINKDOWN);
-		else
-			mpls_ifdown(dev, event);
+		} else {
+			err = mpls_ifdown(dev, event);
+			if (err)
+				return notifier_from_errno(err);
+		}
 		break;
 	case NETDEV_UNREGISTER:
-		mpls_ifdown(dev, event);
+		err = mpls_ifdown(dev, event);
+		if (err)
+			return notifier_from_errno(err);
 		mdev = mpls_dev_get(dev);
 		if (mdev) {
 			mpls_dev_sysctl_unregister(dev, mdev);
@@ -1625,8 +1663,6 @@ static int mpls_dev_notify(struct notifi
 	case NETDEV_CHANGENAME:
 		mdev = mpls_dev_get(dev);
 		if (mdev) {
-			int err;
-
 			mpls_dev_sysctl_unregister(dev, mdev);
 			err = mpls_dev_sysctl_register(dev, mdev);
 			if (err)

[PATCH 5.10 069/130] siphash: use _unaligned version by default

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit f7e5b9bfa6c8820407b64eabc1f29c9a87e8993d upstream.

On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
because the ordinary load/store instructions (ldr, ldrh, ldrb) can
tolerate any misalignment of the memory address. However, load/store
double and load/store multiple instructions (ldrd, ldm) may still only
be used on memory addresses that are 32-bit aligned, and so we have to
use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we
may end up with a severe performance hit due to alignment traps that
require fixups by the kernel. Testing shows that this currently happens
with clang-13 but not gcc-11. In theory, any compiler version can
produce this bug or other problems, as we are dealing with undefined
behavior in C99 even on architectures that support this in hardware,
see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363.

Fortunately, the get_unaligned() accessors do the right thing: when
building for ARMv6 or later, the compiler will emit unaligned accesses
using the ordinary load/store instructions (but avoid the ones that
require 32-bit alignment). When building for older ARM, those accessors
will emit the appropriate sequence of ldrb/mov/orr instructions. And on
architectures that can truly tolerate any kind of misalignment, the
get_unaligned() accessors resolve to the leXX_to_cpup accessors that
operate on aligned addresses.

Since the compiler will in fact emit ldrd or ldm instructions when
building this code for ARM v6 or later, the solution is to use the
unaligned accessors unconditionally on architectures where this is
known to be fast. The _aligned version of the hash function is
however still needed to get the best performance on architectures
that cannot do any unaligned access in hardware.

This new version avoids the undefined behavior and should produce
the fastest hash on all architectures we support.

Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/
Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/siphash.h |   14 ++++----------
 lib/siphash.c           |   12 ++++++------
 2 files changed, 10 insertions(+), 16 deletions(-)

--- a/include/linux/siphash.h
+++ b/include/linux/siphash.h
@@ -27,9 +27,7 @@ static inline bool siphash_key_is_zero(c
 }
 
 u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key);
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key);
-#endif
 
 u64 siphash_1u64(const u64 a, const siphash_key_t *key);
 u64 siphash_2u64(const u64 a, const u64 b, const siphash_key_t *key);
@@ -82,10 +80,9 @@ static inline u64 ___siphash_aligned(con
 static inline u64 siphash(const void *data, size_t len,
 			  const siphash_key_t *key)
 {
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	if (!IS_ALIGNED((unsigned long)data, SIPHASH_ALIGNMENT))
+	if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) ||
+	    !IS_ALIGNED((unsigned long)data, SIPHASH_ALIGNMENT))
 		return __siphash_unaligned(data, len, key);
-#endif
 	return ___siphash_aligned(data, len, key);
 }
 
@@ -96,10 +93,8 @@ typedef struct {
 
 u32 __hsiphash_aligned(const void *data, size_t len,
 		       const hsiphash_key_t *key);
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u32 __hsiphash_unaligned(const void *data, size_t len,
 			 const hsiphash_key_t *key);
-#endif
 
 u32 hsiphash_1u32(const u32 a, const hsiphash_key_t *key);
 u32 hsiphash_2u32(const u32 a, const u32 b, const hsiphash_key_t *key);
@@ -135,10 +130,9 @@ static inline u32 ___hsiphash_aligned(co
 static inline u32 hsiphash(const void *data, size_t len,
 			   const hsiphash_key_t *key)
 {
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
-	if (!IS_ALIGNED((unsigned long)data, HSIPHASH_ALIGNMENT))
+	if (IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) ||
+	    !IS_ALIGNED((unsigned long)data, HSIPHASH_ALIGNMENT))
 		return __hsiphash_unaligned(data, len, key);
-#endif
 	return ___hsiphash_aligned(data, len, key);
 }
 
--- a/lib/siphash.c
+++ b/lib/siphash.c
@@ -49,6 +49,7 @@
 	SIPROUND; \
 	return (v0 ^ v1) ^ (v2 ^ v3);
 
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u64 __siphash_aligned(const void *data, size_t len, const siphash_key_t *key)
 {
 	const u8 *end = data + len - (len % sizeof(u64));
@@ -80,8 +81,8 @@ u64 __siphash_aligned(const void *data,
 	POSTAMBLE
 }
 EXPORT_SYMBOL(__siphash_aligned);
+#endif
 
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u64 __siphash_unaligned(const void *data, size_t len, const siphash_key_t *key)
 {
 	const u8 *end = data + len - (len % sizeof(u64));
@@ -113,7 +114,6 @@ u64 __siphash_unaligned(const void *data
 	POSTAMBLE
 }
 EXPORT_SYMBOL(__siphash_unaligned);
-#endif
 
 /**
  * siphash_1u64 - compute 64-bit siphash PRF value of a u64
@@ -250,6 +250,7 @@ EXPORT_SYMBOL(siphash_3u32);
 	HSIPROUND; \
 	return (v0 ^ v1) ^ (v2 ^ v3);
 
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t *key)
 {
 	const u8 *end = data + len - (len % sizeof(u64));
@@ -280,8 +281,8 @@ u32 __hsiphash_aligned(const void *data,
 	HPOSTAMBLE
 }
 EXPORT_SYMBOL(__hsiphash_aligned);
+#endif
 
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u32 __hsiphash_unaligned(const void *data, size_t len,
 			 const hsiphash_key_t *key)
 {
@@ -313,7 +314,6 @@ u32 __hsiphash_unaligned(const void *dat
 	HPOSTAMBLE
 }
 EXPORT_SYMBOL(__hsiphash_unaligned);
-#endif
 
 /**
  * hsiphash_1u32 - compute 64-bit hsiphash PRF value of a u32
@@ -418,6 +418,7 @@ EXPORT_SYMBOL(hsiphash_4u32);
 	HSIPROUND; \
 	return v1 ^ v3;
 
+#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u32 __hsiphash_aligned(const void *data, size_t len, const hsiphash_key_t *key)
 {
 	const u8 *end = data + len - (len % sizeof(u32));
@@ -438,8 +439,8 @@ u32 __hsiphash_aligned(const void *data,
 	HPOSTAMBLE
 }
 EXPORT_SYMBOL(__hsiphash_aligned);
+#endif
 
-#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
 u32 __hsiphash_unaligned(const void *data, size_t len,
 			 const hsiphash_key_t *key)
 {
@@ -461,7 +462,6 @@ u32 __hsiphash_unaligned(const void *dat
 	HPOSTAMBLE
 }
 EXPORT_SYMBOL(__hsiphash_unaligned);
-#endif
 
 /**
  * hsiphash_1u32 - compute 32-bit hsiphash PRF value of a u32

[PATCH 5.10 070/130] arm64: ftrace: add missing BTIs

[Greg Kroah-Hartman]

From: Mark Rutland <mark.rutland@arm.com>

commit 35b6b28e69985eafb20b3b2c7bd6eca452b56b53 upstream.

When branch target identifiers are in use, code reachable via an
indirect branch requires a BTI landing pad at the branch target site.

When building FTRACE_WITH_REGS atop patchable-function-entry, we miss
BTIs at the start start of the `ftrace_caller` and `ftrace_regs_caller`
trampolines, and when these are called from a module via a PLT (which
will use a `BR X16`), we will encounter a BTI failure, e.g.

| # insmod lkdtm.ko
| lkdtm: No crash points registered, enable through debugfs
| # echo function_graph > /sys/kernel/debug/tracing/current_tracer
| # cat /sys/kernel/debug/provoke-crash/DIRECT
| Unhandled 64-bit el1h sync exception on CPU0, ESR 0x34000001 -- BTI
| CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3
| Hardware name: linux,dummy-virt (DT)
| pstate: 60400405 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=jc)
| pc : ftrace_caller+0x0/0x3c
| lr : lkdtm_debugfs_open+0xc/0x20 [lkdtm]
| sp : ffff800012e43b00
| x29: ffff800012e43b00 x28: 0000000000000000 x27: ffff800012e43c88
| x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000c171f200
| x23: ffff0000c27b1e00 x22: ffff0000c2265240 x21: ffff0000c23c8c30
| x20: ffff8000090ba380 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: ffff80001002bb4c x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000900ff0
| x11: ffff0000c4166310 x10: ffff800012e43b00 x9 : ffff8000104f2384
| x8 : 0000000000000001 x7 : 0000000000000000 x6 : 000000000000003f
| x5 : 0000000000000040 x4 : ffff800012e43af0 x3 : 0000000000000001
| x2 : ffff8000090b0000 x1 : ffff0000c171f200 x0 : ffff0000c23c8c30
| Kernel panic - not syncing: Unhandled exception
| CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3
| Hardware name: linux,dummy-virt (DT)
| Call trace:
|  dump_backtrace+0x0/0x1a4
|  show_stack+0x24/0x30
|  dump_stack_lvl+0x68/0x84
|  dump_stack+0x1c/0x38
|  panic+0x168/0x360
|  arm64_exit_nmi.isra.0+0x0/0x80
|  el1h_64_sync_handler+0x68/0xd4
|  el1h_64_sync+0x78/0x7c
|  ftrace_caller+0x0/0x3c
|  do_dentry_open+0x134/0x3b0
|  vfs_open+0x38/0x44
|  path_openat+0x89c/0xe40
|  do_filp_open+0x8c/0x13c
|  do_sys_openat2+0xbc/0x174
|  __arm64_sys_openat+0x6c/0xbc
|  invoke_syscall+0x50/0x120
|  el0_svc_common.constprop.0+0xdc/0x100
|  do_el0_svc+0x84/0xa0
|  el0_svc+0x28/0x80
|  el0t_64_sync_handler+0xa8/0x130
|  el0t_64_sync+0x1a0/0x1a4
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0,00000f42,da660c5f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---

Fix this by adding the required `BTI C`, as we only require these to be
reachable via BL for direct calls or BR X16/X17 for PLTs. For now, these
are open-coded in the function prologue, matching the style of the
`__hwasan_tag_mismatch` trampoline.

In future we may wish to consider adding a new SYM_CODE_START_*()
variant which has an implicit BTI.

When ftrace is built atop mcount, the trampolines are marked with
SYM_FUNC_START(), and so get an implicit BTI. We may need to change
these over to SYM_CODE_START() in future for RELIABLE_STACKTRACE, in
case we need to apply special care aroud the return address being
rewritten.

Fixes: 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211129135709.2274019-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/entry-ftrace.S |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/arch/arm64/kernel/entry-ftrace.S
+++ b/arch/arm64/kernel/entry-ftrace.S
@@ -77,11 +77,17 @@
 	.endm
 
 SYM_CODE_START(ftrace_regs_caller)
+#ifdef BTI_C
+	BTI_C
+#endif
 	ftrace_regs_entry	1
 	b	ftrace_common
 SYM_CODE_END(ftrace_regs_caller)
 
 SYM_CODE_START(ftrace_caller)
+#ifdef BTI_C
+	BTI_C
+#endif
 	ftrace_regs_entry	0
 	b	ftrace_common
 SYM_CODE_END(ftrace_caller)

[PATCH 5.10 071/130] net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()

[Greg Kroah-Hartman]

From: Zhou Qingyang <zhou1615@umn.edu>

commit addad7643142f500080417dd7272f49b7a185570 upstream.

In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().

Fix this bug by adding a check of mlx4_en_copy_priv()

This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.

Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.

Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code.

Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2276,9 +2276,14 @@ int mlx4_en_try_alloc_resources(struct m
 				bool carry_xdp_prog)
 {
 	struct bpf_prog *xdp_prog;
-	int i, t;
+	int i, t, ret;
 
-	mlx4_en_copy_priv(tmp, priv, prof);
+	ret = mlx4_en_copy_priv(tmp, priv, prof);
+	if (ret) {
+		en_warn(priv, "%s: mlx4_en_copy_priv() failed, return\n",
+			__func__);
+		return ret;
+	}
 
 	if (mlx4_en_alloc_resources(tmp)) {
 		en_warn(priv,

[PATCH 5.10 072/130] selftests: net: Correct case name

[Greg Kroah-Hartman]

From: Li Zhijian <lizhijian@cn.fujitsu.com>

commit a05431b22be819d75db72ca3d44381d18a37b092 upstream.

ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names

Fixes: 34d0302ab861 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3db4c ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/testing/selftests/net/fcnal-test.sh |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/net/fcnal-test.sh
+++ b/tools/testing/selftests/net/fcnal-test.sh
@@ -3911,8 +3911,8 @@ EOF
 ################################################################################
 # main
 
-TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_addr_bind ipv4_runtime ipv4_netfilter"
-TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_addr_bind ipv6_runtime ipv6_netfilter"
+TESTS_IPV4="ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter"
+TESTS_IPV6="ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter"
 TESTS_OTHER="use_cases"
 
 PAUSE_ON_FAIL=no

[PATCH 5.10 073/130] mt76: mt7915: fix NULL pointer dereference in mt7915_get_phy_mode

[Greg Kroah-Hartman]

From: Lorenzo Bianconi <lorenzo@kernel.org>

commit 6e53d6d26920d5221d3f4d4f5ffdd629ea69aa5c upstream.

Fix the following NULL pointer dereference in mt7915_get_phy_mode
routine adding an ibss interface to the mt7915 driver.

[  101.137097] wlan0: Trigger new scan to find an IBSS to join
[  102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69
[  103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[  103.073670] Mem abort info:
[  103.076520]   ESR = 0x96000005
[  103.079614]   EC = 0x25: DABT (current EL), IL = 32 bits
[  103.084934]   SET = 0, FnV = 0
[  103.088042]   EA = 0, S1PTW = 0
[  103.091215] Data abort info:
[  103.094104]   ISV = 0, ISS = 0x00000005
[  103.098041]   CM = 0, WnR = 0
[  103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000
[  103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[  103.116590] Internal error: Oops: 96000005 [#1] SMP
[  103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0
[  103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT)
[  103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211]
[  103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--)
[  103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e]
[  103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e]
[  103.223927] sp : ffffffc011cdb9e0
[  103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098
[  103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40
[  103.237855] x25: 0000000000000001 x24: 000000000000011f
[  103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918
[  103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58
[  103.253785] x19: ffffff8006744400 x18: 0000000000000000
[  103.259094] x17: 0000000000000000 x16: 0000000000000001
[  103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8
[  103.269713] x13: 0000000000000000 x12: 0000000000000000
[  103.275024] x11: ffffffc010e30c20 x10: 0000000000000000
[  103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88
[  103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44
[  103.290952] x5 : 0000000000000002 x4 : 0000000000000001
[  103.296262] x3 : 0000000000000001 x2 : 0000000000000001
[  103.301572] x1 : 0000000000000000 x0 : 0000000000000011
[  103.306882] Call trace:
[  103.309328]  mt7915_get_phy_mode+0x68/0x120 [mt7915e]
[  103.314378]  mt7915_bss_info_changed+0x198/0x200 [mt7915e]
[  103.319941]  ieee80211_bss_info_change_notify+0x128/0x290 [mac80211]
[  103.326360]  __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211]
[  103.332171]  ieee80211_sta_create_ibss+0x8c/0x10c [mac80211]
[  103.337895]  ieee80211_ibss_work+0x3dc/0x614 [mac80211]
[  103.343185]  ieee80211_iface_work+0x388/0x3f0 [mac80211]
[  103.348495]  process_one_work+0x288/0x690
[  103.352499]  worker_thread+0x70/0x464
[  103.356157]  kthread+0x144/0x150
[  103.359380]  ret_from_fork+0x10/0x18
[  103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023)

Fixes: 37f4ca907c46 ("mt76: mt7915: register per-phy HE capabilities for each interface")
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/ddae419a740f1fb9e48afd432035e9f394f512ee.1637239456.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -182,7 +182,7 @@ mt7915_get_phy_mode(struct mt7915_dev *d
 		if (ht_cap->ht_supported)
 			mode |= PHY_MODE_GN;
 
-		if (he_cap->has_he)
+		if (he_cap && he_cap->has_he)
 			mode |= PHY_MODE_AX_24G;
 	} else if (band == NL80211_BAND_5GHZ) {
 		mode |= PHY_MODE_A;
@@ -193,7 +193,7 @@ mt7915_get_phy_mode(struct mt7915_dev *d
 		if (vht_cap->vht_supported)
 			mode |= PHY_MODE_AC;
 
-		if (he_cap->has_he)
+		if (he_cap && he_cap->has_he)
 			mode |= PHY_MODE_AX_5G;
 	}
 

[PATCH 5.10 074/130] ASoC: tegra: Fix wrong value type in ADMAIF

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit 884c6cb3b7030f75c46e55b9e625d2372708c306 upstream.

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: f74028e159bb ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_admaif.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/soc/tegra/tegra210_admaif.c
+++ b/sound/soc/tegra/tegra210_admaif.c
@@ -430,7 +430,7 @@ static int tegra_admaif_get_control(stru
 	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
 	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
 	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
-	long *uctl_val = &ucontrol->value.integer.value[0];
+	unsigned int *uctl_val = &ucontrol->value.enumerated.item[0];
 
 	if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
 		*uctl_val = admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg];
@@ -450,7 +450,7 @@ static int tegra_admaif_put_control(stru
 	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
 	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
 	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
-	int value = ucontrol->value.integer.value[0];
+	unsigned int value = ucontrol->value.enumerated.item[0];
 
 	if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
 		admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg] = value;

[PATCH 5.10 075/130] ASoC: tegra: Fix wrong value type in I2S

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit 8a2c2fa0c5331445c801e9241f2bb4e0e2a895a8 upstream.

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: c0bfa98349d1 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_i2s.c |   42 +++++++++++++++++++++++------------------
 1 file changed, 24 insertions(+), 18 deletions(-)

--- a/sound/soc/tegra/tegra210_i2s.c
+++ b/sound/soc/tegra/tegra210_i2s.c
@@ -317,24 +317,27 @@ static int tegra210_i2s_get_control(stru
 {
 	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
-	long *uctl_val = &ucontrol->value.integer.value[0];
 
 	if (strstr(kcontrol->id.name, "Loopback"))
-		*uctl_val = i2s->loopback;
+		ucontrol->value.integer.value[0] = i2s->loopback;
 	else if (strstr(kcontrol->id.name, "FSYNC Width"))
-		*uctl_val = i2s->fsync_width;
+		ucontrol->value.integer.value[0] = i2s->fsync_width;
 	else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
-		*uctl_val = i2s->stereo_to_mono[I2S_TX_PATH];
+		ucontrol->value.enumerated.item[0] =
+			i2s->stereo_to_mono[I2S_TX_PATH];
 	else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
-		*uctl_val = i2s->mono_to_stereo[I2S_TX_PATH];
+		ucontrol->value.enumerated.item[0] =
+			i2s->mono_to_stereo[I2S_TX_PATH];
 	else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
-		*uctl_val = i2s->stereo_to_mono[I2S_RX_PATH];
+		ucontrol->value.enumerated.item[0] =
+			i2s->stereo_to_mono[I2S_RX_PATH];
 	else if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
-		*uctl_val = i2s->mono_to_stereo[I2S_RX_PATH];
+		ucontrol->value.enumerated.item[0] =
+			i2s->mono_to_stereo[I2S_RX_PATH];
 	else if (strstr(kcontrol->id.name, "Playback FIFO Threshold"))
-		*uctl_val = i2s->rx_fifo_th;
+		ucontrol->value.integer.value[0] = i2s->rx_fifo_th;
 	else if (strstr(kcontrol->id.name, "BCLK Ratio"))
-		*uctl_val = i2s->bclk_ratio;
+		ucontrol->value.integer.value[0] = i2s->bclk_ratio;
 
 	return 0;
 }
@@ -344,10 +347,9 @@ static int tegra210_i2s_put_control(stru
 {
 	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
-	int value = ucontrol->value.integer.value[0];
 
 	if (strstr(kcontrol->id.name, "Loopback")) {
-		i2s->loopback = value;
+		i2s->loopback = ucontrol->value.integer.value[0];
 
 		regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL,
 				   I2S_CTRL_LPBK_MASK,
@@ -362,24 +364,28 @@ static int tegra210_i2s_put_control(stru
 		 * cases mixer control is used to update custom values. A value
 		 * of "N" here means, width is "N + 1" bit clock wide.
 		 */
-		i2s->fsync_width = value;
+		i2s->fsync_width = ucontrol->value.integer.value[0];
 
 		regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL,
 				   I2S_CTRL_FSYNC_WIDTH_MASK,
 				   i2s->fsync_width << I2S_FSYNC_WIDTH_SHIFT);
 
 	} else if (strstr(kcontrol->id.name, "Capture Stereo To Mono")) {
-		i2s->stereo_to_mono[I2S_TX_PATH] = value;
+		i2s->stereo_to_mono[I2S_TX_PATH] =
+			ucontrol->value.enumerated.item[0];
 	} else if (strstr(kcontrol->id.name, "Capture Mono To Stereo")) {
-		i2s->mono_to_stereo[I2S_TX_PATH] = value;
+		i2s->mono_to_stereo[I2S_TX_PATH] =
+			ucontrol->value.enumerated.item[0];
 	} else if (strstr(kcontrol->id.name, "Playback Stereo To Mono")) {
-		i2s->stereo_to_mono[I2S_RX_PATH] = value;
+		i2s->stereo_to_mono[I2S_RX_PATH] =
+			ucontrol->value.enumerated.item[0];
 	} else if (strstr(kcontrol->id.name, "Playback Mono To Stereo")) {
-		i2s->mono_to_stereo[I2S_RX_PATH] = value;
+		i2s->mono_to_stereo[I2S_RX_PATH] =
+			ucontrol->value.enumerated.item[0];
 	} else if (strstr(kcontrol->id.name, "Playback FIFO Threshold")) {
-		i2s->rx_fifo_th = value;
+		i2s->rx_fifo_th = ucontrol->value.integer.value[0];
 	} else if (strstr(kcontrol->id.name, "BCLK Ratio")) {
-		i2s->bclk_ratio = value;
+		i2s->bclk_ratio = ucontrol->value.integer.value[0];
 	}
 
 	return 0;

[PATCH 5.10 076/130] ASoC: tegra: Fix wrong value type in DMIC

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit 559d234569a998a4004de1bd1f12da5487fb826e upstream.

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: 8c8ff982e9e2 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_dmic.c |   23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

--- a/sound/soc/tegra/tegra210_dmic.c
+++ b/sound/soc/tegra/tegra210_dmic.c
@@ -165,15 +165,15 @@ static int tegra210_dmic_get_control(str
 	if (strstr(kcontrol->id.name, "Boost Gain Volume"))
 		ucontrol->value.integer.value[0] = dmic->boost_gain;
 	else if (strstr(kcontrol->id.name, "Channel Select"))
-		ucontrol->value.integer.value[0] = dmic->ch_select;
+		ucontrol->value.enumerated.item[0] = dmic->ch_select;
 	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		ucontrol->value.integer.value[0] = dmic->mono_to_stereo;
+		ucontrol->value.enumerated.item[0] = dmic->mono_to_stereo;
 	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		ucontrol->value.integer.value[0] = dmic->stereo_to_mono;
+		ucontrol->value.enumerated.item[0] = dmic->stereo_to_mono;
 	else if (strstr(kcontrol->id.name, "OSR Value"))
-		ucontrol->value.integer.value[0] = dmic->osr_val;
+		ucontrol->value.enumerated.item[0] = dmic->osr_val;
 	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		ucontrol->value.integer.value[0] = dmic->lrsel;
+		ucontrol->value.enumerated.item[0] = dmic->lrsel;
 
 	return 0;
 }
@@ -183,20 +183,19 @@ static int tegra210_dmic_put_control(str
 {
 	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
-	int value = ucontrol->value.integer.value[0];
 
 	if (strstr(kcontrol->id.name, "Boost Gain Volume"))
-		dmic->boost_gain = value;
+		dmic->boost_gain = ucontrol->value.integer.value[0];
 	else if (strstr(kcontrol->id.name, "Channel Select"))
-		dmic->ch_select = ucontrol->value.integer.value[0];
+		dmic->ch_select = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		dmic->mono_to_stereo = value;
+		dmic->mono_to_stereo = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		dmic->stereo_to_mono = value;
+		dmic->stereo_to_mono = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "OSR Value"))
-		dmic->osr_val = value;
+		dmic->osr_val = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		dmic->lrsel = value;
+		dmic->lrsel = ucontrol->value.enumerated.item[0];
 
 	return 0;
 }

[PATCH 5.10 077/130] ASoC: tegra: Fix wrong value type in DSPK

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit 3aa0d5c8bb3f5ef622ec2764823f551a1f630711 upstream.

The enum controls are expected to use enumerated value type.
Update relevant references in control get/put callbacks.

Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-5-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra186_dspk.c |   23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

--- a/sound/soc/tegra/tegra186_dspk.c
+++ b/sound/soc/tegra/tegra186_dspk.c
@@ -35,15 +35,15 @@ static int tegra186_dspk_get_control(str
 	if (strstr(kcontrol->id.name, "FIFO Threshold"))
 		ucontrol->value.integer.value[0] = dspk->rx_fifo_th;
 	else if (strstr(kcontrol->id.name, "OSR Value"))
-		ucontrol->value.integer.value[0] = dspk->osr_val;
+		ucontrol->value.enumerated.item[0] = dspk->osr_val;
 	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		ucontrol->value.integer.value[0] = dspk->lrsel;
+		ucontrol->value.enumerated.item[0] = dspk->lrsel;
 	else if (strstr(kcontrol->id.name, "Channel Select"))
-		ucontrol->value.integer.value[0] = dspk->ch_sel;
+		ucontrol->value.enumerated.item[0] = dspk->ch_sel;
 	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		ucontrol->value.integer.value[0] = dspk->mono_to_stereo;
+		ucontrol->value.enumerated.item[0] = dspk->mono_to_stereo;
 	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		ucontrol->value.integer.value[0] = dspk->stereo_to_mono;
+		ucontrol->value.enumerated.item[0] = dspk->stereo_to_mono;
 
 	return 0;
 }
@@ -53,20 +53,19 @@ static int tegra186_dspk_put_control(str
 {
 	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
 	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
-	int val = ucontrol->value.integer.value[0];
 
 	if (strstr(kcontrol->id.name, "FIFO Threshold"))
-		dspk->rx_fifo_th = val;
+		dspk->rx_fifo_th = ucontrol->value.integer.value[0];
 	else if (strstr(kcontrol->id.name, "OSR Value"))
-		dspk->osr_val = val;
+		dspk->osr_val = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		dspk->lrsel = val;
+		dspk->lrsel = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "Channel Select"))
-		dspk->ch_sel = val;
+		dspk->ch_sel = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		dspk->mono_to_stereo = val;
+		dspk->mono_to_stereo = ucontrol->value.enumerated.item[0];
 	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		dspk->stereo_to_mono = val;
+		dspk->stereo_to_mono = ucontrol->value.enumerated.item[0];
 
 	return 0;
 }

[PATCH 5.10 078/130] ASoC: tegra: Fix kcontrol put callback in ADMAIF

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit e2b87a18a60c02d0dcd1de801d669587e516cc4d upstream.

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the ADMAIF driver accordingly.

Fixes: f74028e159bb ("ASoC: tegra: Add Tegra210 based ADMAIF driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-8-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_admaif.c |  138 ++++++++++++++++++++++++++++++--------
 1 file changed, 109 insertions(+), 29 deletions(-)

--- a/sound/soc/tegra/tegra210_admaif.c
+++ b/sound/soc/tegra/tegra210_admaif.c
@@ -424,46 +424,122 @@ static const struct snd_soc_dai_ops tegr
 	.trigger	= tegra_admaif_trigger,
 };
 
-static int tegra_admaif_get_control(struct snd_kcontrol *kcontrol,
-				    struct snd_ctl_elem_value *ucontrol)
+static int tegra210_admaif_pget_mono_to_stereo(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
 	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+
+	ucontrol->value.enumerated.item[0] =
+		admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg];
+
+	return 0;
+}
+
+static int tegra210_admaif_pput_mono_to_stereo(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
 	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
-	unsigned int *uctl_val = &ucontrol->value.enumerated.item[0];
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	unsigned int value = ucontrol->value.enumerated.item[0];
 
-	if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
-		*uctl_val = admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg];
-	else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
-		*uctl_val = admaif->mono_to_stereo[ADMAIF_RX_PATH][ec->reg];
-	else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
-		*uctl_val = admaif->stereo_to_mono[ADMAIF_TX_PATH][ec->reg];
-	else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
-		*uctl_val = admaif->stereo_to_mono[ADMAIF_RX_PATH][ec->reg];
+	if (value == admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg])
+		return 0;
+
+	admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg] = value;
+
+	return 1;
+}
+
+static int tegra210_admaif_cget_mono_to_stereo(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+
+	ucontrol->value.enumerated.item[0] =
+		admaif->mono_to_stereo[ADMAIF_RX_PATH][ec->reg];
 
 	return 0;
 }
 
-static int tegra_admaif_put_control(struct snd_kcontrol *kcontrol,
-				    struct snd_ctl_elem_value *ucontrol)
+static int tegra210_admaif_cput_mono_to_stereo(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
 	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == admaif->mono_to_stereo[ADMAIF_RX_PATH][ec->reg])
+		return 0;
+
+	admaif->mono_to_stereo[ADMAIF_RX_PATH][ec->reg] = value;
+
+	return 1;
+}
+
+static int tegra210_admaif_pget_stereo_to_mono(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
 	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+
+	ucontrol->value.enumerated.item[0] =
+		admaif->stereo_to_mono[ADMAIF_TX_PATH][ec->reg];
+
+	return 0;
+}
+
+static int tegra210_admaif_pput_stereo_to_mono(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
 	unsigned int value = ucontrol->value.enumerated.item[0];
 
-	if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
-		admaif->mono_to_stereo[ADMAIF_TX_PATH][ec->reg] = value;
-	else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
-		admaif->mono_to_stereo[ADMAIF_RX_PATH][ec->reg] = value;
-	else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
-		admaif->stereo_to_mono[ADMAIF_TX_PATH][ec->reg] = value;
-	else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
-		admaif->stereo_to_mono[ADMAIF_RX_PATH][ec->reg] = value;
+	if (value == admaif->stereo_to_mono[ADMAIF_TX_PATH][ec->reg])
+		return 0;
+
+	admaif->stereo_to_mono[ADMAIF_TX_PATH][ec->reg] = value;
+
+	return 1;
+}
+
+static int tegra210_admaif_cget_stereo_to_mono(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+
+	ucontrol->value.enumerated.item[0] =
+		admaif->stereo_to_mono[ADMAIF_RX_PATH][ec->reg];
 
 	return 0;
 }
 
+static int tegra210_admaif_cput_stereo_to_mono(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra_admaif *admaif = snd_soc_component_get_drvdata(cmpnt);
+	struct soc_enum *ec = (struct soc_enum *)kcontrol->private_value;
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == admaif->stereo_to_mono[ADMAIF_RX_PATH][ec->reg])
+		return 0;
+
+	admaif->stereo_to_mono[ADMAIF_RX_PATH][ec->reg] = value;
+
+	return 1;
+}
+
 static int tegra_admaif_dai_probe(struct snd_soc_dai *dai)
 {
 	struct tegra_admaif *admaif = snd_soc_dai_get_drvdata(dai);
@@ -559,17 +635,21 @@ static const char * const tegra_admaif_m
 }
 
 #define TEGRA_ADMAIF_CIF_CTRL(reg)					       \
-	NV_SOC_ENUM_EXT("ADMAIF" #reg " Playback Mono To Stereo", reg - 1,\
-			tegra_admaif_get_control, tegra_admaif_put_control,    \
+	NV_SOC_ENUM_EXT("ADMAIF" #reg " Playback Mono To Stereo", reg - 1,     \
+			tegra210_admaif_pget_mono_to_stereo,		       \
+			tegra210_admaif_pput_mono_to_stereo,		       \
 			tegra_admaif_mono_conv_text),			       \
-	NV_SOC_ENUM_EXT("ADMAIF" #reg " Playback Stereo To Mono", reg - 1,\
-			tegra_admaif_get_control, tegra_admaif_put_control,    \
+	NV_SOC_ENUM_EXT("ADMAIF" #reg " Playback Stereo To Mono", reg - 1,     \
+			tegra210_admaif_pget_stereo_to_mono,		       \
+			tegra210_admaif_pput_stereo_to_mono,		       \
 			tegra_admaif_stereo_conv_text),			       \
-	NV_SOC_ENUM_EXT("ADMAIF" #reg " Capture Mono To Stereo", reg - 1, \
-			tegra_admaif_get_control, tegra_admaif_put_control,    \
+	NV_SOC_ENUM_EXT("ADMAIF" #reg " Capture Mono To Stereo", reg - 1,      \
+			tegra210_admaif_cget_mono_to_stereo,		       \
+			tegra210_admaif_cput_mono_to_stereo,		       \
 			tegra_admaif_mono_conv_text),			       \
-	NV_SOC_ENUM_EXT("ADMAIF" #reg " Capture Stereo To Mono", reg - 1, \
-			tegra_admaif_get_control, tegra_admaif_put_control,    \
+	NV_SOC_ENUM_EXT("ADMAIF" #reg " Capture Stereo To Mono", reg - 1,      \
+			tegra210_admaif_cget_stereo_to_mono,		       \
+			tegra210_admaif_cput_stereo_to_mono,		       \
 			tegra_admaif_stereo_conv_text)
 
 static struct snd_kcontrol_new tegra210_admaif_controls[] = {

[PATCH 5.10 079/130] ASoC: tegra: Fix kcontrol put callback in I2S

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit f21a9df3f7cb0005947679d7b9237c90574e229a upstream.

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the I2S driver accordingly.

Fixes: c0bfa98349d1 ("ASoC: tegra: Add Tegra210 based I2S driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-9-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_i2s.c |  322 ++++++++++++++++++++++++++++++-----------
 1 file changed, 236 insertions(+), 86 deletions(-)

--- a/sound/soc/tegra/tegra210_i2s.c
+++ b/sound/soc/tegra/tegra210_i2s.c
@@ -302,91 +302,235 @@ static int tegra210_i2s_set_tdm_slot(str
 	return 0;
 }
 
-static int tegra210_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
-					   unsigned int ratio)
+static int tegra210_i2s_get_loopback(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
 {
-	struct tegra210_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
 
-	i2s->bclk_ratio = ratio;
+	ucontrol->value.integer.value[0] = i2s->loopback;
 
 	return 0;
 }
 
-static int tegra210_i2s_get_control(struct snd_kcontrol *kcontrol,
-				    struct snd_ctl_elem_value *ucontrol)
+static int tegra210_i2s_put_loopback(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	int value = ucontrol->value.integer.value[0];
 
-	if (strstr(kcontrol->id.name, "Loopback"))
-		ucontrol->value.integer.value[0] = i2s->loopback;
-	else if (strstr(kcontrol->id.name, "FSYNC Width"))
-		ucontrol->value.integer.value[0] = i2s->fsync_width;
-	else if (strstr(kcontrol->id.name, "Capture Stereo To Mono"))
-		ucontrol->value.enumerated.item[0] =
-			i2s->stereo_to_mono[I2S_TX_PATH];
-	else if (strstr(kcontrol->id.name, "Capture Mono To Stereo"))
-		ucontrol->value.enumerated.item[0] =
-			i2s->mono_to_stereo[I2S_TX_PATH];
-	else if (strstr(kcontrol->id.name, "Playback Stereo To Mono"))
-		ucontrol->value.enumerated.item[0] =
-			i2s->stereo_to_mono[I2S_RX_PATH];
-	else if (strstr(kcontrol->id.name, "Playback Mono To Stereo"))
-		ucontrol->value.enumerated.item[0] =
-			i2s->mono_to_stereo[I2S_RX_PATH];
-	else if (strstr(kcontrol->id.name, "Playback FIFO Threshold"))
-		ucontrol->value.integer.value[0] = i2s->rx_fifo_th;
-	else if (strstr(kcontrol->id.name, "BCLK Ratio"))
-		ucontrol->value.integer.value[0] = i2s->bclk_ratio;
-
-	return 0;
-}
-
-static int tegra210_i2s_put_control(struct snd_kcontrol *kcontrol,
-				    struct snd_ctl_elem_value *ucontrol)
-{
-	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
-	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
-
-	if (strstr(kcontrol->id.name, "Loopback")) {
-		i2s->loopback = ucontrol->value.integer.value[0];
-
-		regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL,
-				   I2S_CTRL_LPBK_MASK,
-				   i2s->loopback << I2S_CTRL_LPBK_SHIFT);
-
-	} else if (strstr(kcontrol->id.name, "FSYNC Width")) {
-		/*
-		 * Frame sync width is used only for FSYNC modes and not
-		 * applicable for LRCK modes. Reset value for this field is "0",
-		 * which means the width is one bit clock wide.
-		 * The width requirement may depend on the codec and in such
-		 * cases mixer control is used to update custom values. A value
-		 * of "N" here means, width is "N + 1" bit clock wide.
-		 */
-		i2s->fsync_width = ucontrol->value.integer.value[0];
-
-		regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL,
-				   I2S_CTRL_FSYNC_WIDTH_MASK,
-				   i2s->fsync_width << I2S_FSYNC_WIDTH_SHIFT);
-
-	} else if (strstr(kcontrol->id.name, "Capture Stereo To Mono")) {
-		i2s->stereo_to_mono[I2S_TX_PATH] =
-			ucontrol->value.enumerated.item[0];
-	} else if (strstr(kcontrol->id.name, "Capture Mono To Stereo")) {
-		i2s->mono_to_stereo[I2S_TX_PATH] =
-			ucontrol->value.enumerated.item[0];
-	} else if (strstr(kcontrol->id.name, "Playback Stereo To Mono")) {
-		i2s->stereo_to_mono[I2S_RX_PATH] =
-			ucontrol->value.enumerated.item[0];
-	} else if (strstr(kcontrol->id.name, "Playback Mono To Stereo")) {
-		i2s->mono_to_stereo[I2S_RX_PATH] =
-			ucontrol->value.enumerated.item[0];
-	} else if (strstr(kcontrol->id.name, "Playback FIFO Threshold")) {
-		i2s->rx_fifo_th = ucontrol->value.integer.value[0];
-	} else if (strstr(kcontrol->id.name, "BCLK Ratio")) {
-		i2s->bclk_ratio = ucontrol->value.integer.value[0];
-	}
+	if (value == i2s->loopback)
+		return 0;
+
+	i2s->loopback = value;
+
+	regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL, I2S_CTRL_LPBK_MASK,
+			   i2s->loopback << I2S_CTRL_LPBK_SHIFT);
+
+	return 1;
+}
+
+static int tegra210_i2s_get_fsync_width(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.integer.value[0] = i2s->fsync_width;
+
+	return 0;
+}
+
+static int tegra210_i2s_put_fsync_width(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	int value = ucontrol->value.integer.value[0];
+
+	if (value == i2s->fsync_width)
+		return 0;
+
+	i2s->fsync_width = value;
+
+	/*
+	 * Frame sync width is used only for FSYNC modes and not
+	 * applicable for LRCK modes. Reset value for this field is "0",
+	 * which means the width is one bit clock wide.
+	 * The width requirement may depend on the codec and in such
+	 * cases mixer control is used to update custom values. A value
+	 * of "N" here means, width is "N + 1" bit clock wide.
+	 */
+	regmap_update_bits(i2s->regmap, TEGRA210_I2S_CTRL,
+			   I2S_CTRL_FSYNC_WIDTH_MASK,
+			   i2s->fsync_width << I2S_FSYNC_WIDTH_SHIFT);
+
+	return 1;
+}
+
+static int tegra210_i2s_cget_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.enumerated.item[0] = i2s->stereo_to_mono[I2S_TX_PATH];
+
+	return 0;
+}
+
+static int tegra210_i2s_cput_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == i2s->stereo_to_mono[I2S_TX_PATH])
+		return 0;
+
+	i2s->stereo_to_mono[I2S_TX_PATH] = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_cget_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.enumerated.item[0] = i2s->mono_to_stereo[I2S_TX_PATH];
+
+	return 0;
+}
+
+static int tegra210_i2s_cput_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == i2s->mono_to_stereo[I2S_TX_PATH])
+		return 0;
+
+	i2s->mono_to_stereo[I2S_TX_PATH] = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_pget_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.enumerated.item[0] = i2s->stereo_to_mono[I2S_RX_PATH];
+
+	return 0;
+}
+
+static int tegra210_i2s_pput_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == i2s->stereo_to_mono[I2S_RX_PATH])
+		return 0;
+
+	i2s->stereo_to_mono[I2S_RX_PATH] = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_pget_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.enumerated.item[0] = i2s->mono_to_stereo[I2S_RX_PATH];
+
+	return 0;
+}
+
+static int tegra210_i2s_pput_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == i2s->mono_to_stereo[I2S_RX_PATH])
+		return 0;
+
+	i2s->mono_to_stereo[I2S_RX_PATH] = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_pget_fifo_th(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.integer.value[0] = i2s->rx_fifo_th;
+
+	return 0;
+}
+
+static int tegra210_i2s_pput_fifo_th(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	int value = ucontrol->value.integer.value[0];
+
+	if (value == i2s->rx_fifo_th)
+		return 0;
+
+	i2s->rx_fifo_th = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_get_bclk_ratio(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+
+	ucontrol->value.integer.value[0] = i2s->bclk_ratio;
+
+	return 0;
+}
+
+static int tegra210_i2s_put_bclk_ratio(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *compnt = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_i2s *i2s = snd_soc_component_get_drvdata(compnt);
+	int value = ucontrol->value.integer.value[0];
+
+	if (value == i2s->bclk_ratio)
+		return 0;
+
+	i2s->bclk_ratio = value;
+
+	return 1;
+}
+
+static int tegra210_i2s_set_dai_bclk_ratio(struct snd_soc_dai *dai,
+					   unsigned int ratio)
+{
+	struct tegra210_i2s *i2s = snd_soc_dai_get_drvdata(dai);
+
+	i2s->bclk_ratio = ratio;
 
 	return 0;
 }
@@ -604,22 +748,28 @@ static const struct soc_enum tegra210_i2
 			tegra210_i2s_stereo_conv_text);
 
 static const struct snd_kcontrol_new tegra210_i2s_controls[] = {
-	SOC_SINGLE_EXT("Loopback", 0, 0, 1, 0, tegra210_i2s_get_control,
-		       tegra210_i2s_put_control),
-	SOC_SINGLE_EXT("FSYNC Width", 0, 0, 255, 0, tegra210_i2s_get_control,
-		       tegra210_i2s_put_control),
+	SOC_SINGLE_EXT("Loopback", 0, 0, 1, 0, tegra210_i2s_get_loopback,
+		       tegra210_i2s_put_loopback),
+	SOC_SINGLE_EXT("FSYNC Width", 0, 0, 255, 0,
+		       tegra210_i2s_get_fsync_width,
+		       tegra210_i2s_put_fsync_width),
 	SOC_ENUM_EXT("Capture Stereo To Mono", tegra210_i2s_stereo_conv_enum,
-		     tegra210_i2s_get_control, tegra210_i2s_put_control),
+		     tegra210_i2s_cget_stereo_to_mono,
+		     tegra210_i2s_cput_stereo_to_mono),
 	SOC_ENUM_EXT("Capture Mono To Stereo", tegra210_i2s_mono_conv_enum,
-		     tegra210_i2s_get_control, tegra210_i2s_put_control),
+		     tegra210_i2s_cget_mono_to_stereo,
+		     tegra210_i2s_cput_mono_to_stereo),
 	SOC_ENUM_EXT("Playback Stereo To Mono", tegra210_i2s_stereo_conv_enum,
-		     tegra210_i2s_get_control, tegra210_i2s_put_control),
+		     tegra210_i2s_pget_mono_to_stereo,
+		     tegra210_i2s_pput_mono_to_stereo),
 	SOC_ENUM_EXT("Playback Mono To Stereo", tegra210_i2s_mono_conv_enum,
-		     tegra210_i2s_get_control, tegra210_i2s_put_control),
+		     tegra210_i2s_pget_stereo_to_mono,
+		     tegra210_i2s_pput_stereo_to_mono),
 	SOC_SINGLE_EXT("Playback FIFO Threshold", 0, 0, I2S_RX_FIFO_DEPTH - 1,
-		       0, tegra210_i2s_get_control, tegra210_i2s_put_control),
-	SOC_SINGLE_EXT("BCLK Ratio", 0, 0, INT_MAX, 0, tegra210_i2s_get_control,
-		       tegra210_i2s_put_control),
+		       0, tegra210_i2s_pget_fifo_th, tegra210_i2s_pput_fifo_th),
+	SOC_SINGLE_EXT("BCLK Ratio", 0, 0, INT_MAX, 0,
+		       tegra210_i2s_get_bclk_ratio,
+		       tegra210_i2s_put_bclk_ratio),
 };
 
 static const struct snd_soc_dapm_widget tegra210_i2s_widgets[] = {

[PATCH 5.10 080/130] ASoC: tegra: Fix kcontrol put callback in DMIC

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit a347dfa10262fa0a10e2b1970ea0194e3d4a3251 upstream.

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DMIC driver accordingly.

Fixes: 8c8ff982e9e2 ("ASoC: tegra: Add Tegra210 based DMIC driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-10-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_dmic.c |  183 ++++++++++++++++++++++++++++++++--------
 1 file changed, 149 insertions(+), 34 deletions(-)

--- a/sound/soc/tegra/tegra210_dmic.c
+++ b/sound/soc/tegra/tegra210_dmic.c
@@ -156,50 +156,162 @@ static int tegra210_dmic_hw_params(struc
 	return 0;
 }
 
-static int tegra210_dmic_get_control(struct snd_kcontrol *kcontrol,
+static int tegra210_dmic_get_boost_gain(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+
+	ucontrol->value.integer.value[0] = dmic->boost_gain;
+
+	return 0;
+}
+
+static int tegra210_dmic_put_boost_gain(struct snd_kcontrol *kcontrol,
+					struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	int value = ucontrol->value.integer.value[0];
+
+	if (value == dmic->boost_gain)
+		return 0;
+
+	dmic->boost_gain = value;
+
+	return 1;
+}
+
+static int tegra210_dmic_get_ch_select(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+
+	ucontrol->value.enumerated.item[0] = dmic->ch_select;
+
+	return 0;
+}
+
+static int tegra210_dmic_put_ch_select(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dmic->ch_select)
+		return 0;
+
+	dmic->ch_select = value;
+
+	return 1;
+}
+
+static int tegra210_dmic_get_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+
+	ucontrol->value.enumerated.item[0] = dmic->mono_to_stereo;
+
+	return 0;
+}
+
+static int tegra210_dmic_put_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dmic->mono_to_stereo)
+		return 0;
+
+	dmic->mono_to_stereo = value;
+
+	return 1;
+}
+
+static int tegra210_dmic_get_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+
+	ucontrol->value.enumerated.item[0] = dmic->stereo_to_mono;
+
+	return 0;
+}
+
+static int tegra210_dmic_put_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dmic->stereo_to_mono)
+		return 0;
+
+	dmic->stereo_to_mono = value;
+
+	return 1;
+}
+
+static int tegra210_dmic_get_osr_val(struct snd_kcontrol *kcontrol,
 				     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
 
-	if (strstr(kcontrol->id.name, "Boost Gain Volume"))
-		ucontrol->value.integer.value[0] = dmic->boost_gain;
-	else if (strstr(kcontrol->id.name, "Channel Select"))
-		ucontrol->value.enumerated.item[0] = dmic->ch_select;
-	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		ucontrol->value.enumerated.item[0] = dmic->mono_to_stereo;
-	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		ucontrol->value.enumerated.item[0] = dmic->stereo_to_mono;
-	else if (strstr(kcontrol->id.name, "OSR Value"))
-		ucontrol->value.enumerated.item[0] = dmic->osr_val;
-	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		ucontrol->value.enumerated.item[0] = dmic->lrsel;
+	ucontrol->value.enumerated.item[0] = dmic->osr_val;
 
 	return 0;
 }
 
-static int tegra210_dmic_put_control(struct snd_kcontrol *kcontrol,
+static int tegra210_dmic_put_osr_val(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dmic->osr_val)
+		return 0;
+
+	dmic->osr_val = value;
+
+	return 1;
+}
+
+static int tegra210_dmic_get_pol_sel(struct snd_kcontrol *kcontrol,
 				     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
 	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
 
-	if (strstr(kcontrol->id.name, "Boost Gain Volume"))
-		dmic->boost_gain = ucontrol->value.integer.value[0];
-	else if (strstr(kcontrol->id.name, "Channel Select"))
-		dmic->ch_select = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		dmic->mono_to_stereo = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		dmic->stereo_to_mono = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "OSR Value"))
-		dmic->osr_val = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		dmic->lrsel = ucontrol->value.enumerated.item[0];
+	ucontrol->value.enumerated.item[0] = dmic->lrsel;
 
 	return 0;
 }
 
+static int tegra210_dmic_put_pol_sel(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *comp = snd_soc_kcontrol_component(kcontrol);
+	struct tegra210_dmic *dmic = snd_soc_component_get_drvdata(comp);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dmic->lrsel)
+		return 0;
+
+	dmic->lrsel = value;
+
+	return 1;
+}
+
 static const struct snd_soc_dai_ops tegra210_dmic_dai_ops = {
 	.hw_params	= tegra210_dmic_hw_params,
 };
@@ -286,19 +398,22 @@ static const struct soc_enum tegra210_dm
 
 static const struct snd_kcontrol_new tegra210_dmic_controls[] = {
 	SOC_SINGLE_EXT("Boost Gain Volume", 0, 0, MAX_BOOST_GAIN, 0,
-		       tegra210_dmic_get_control, tegra210_dmic_put_control),
+		       tegra210_dmic_get_boost_gain,
+		       tegra210_dmic_put_boost_gain),
 	SOC_ENUM_EXT("Channel Select", tegra210_dmic_ch_enum,
-		     tegra210_dmic_get_control, tegra210_dmic_put_control),
+		     tegra210_dmic_get_ch_select, tegra210_dmic_put_ch_select),
 	SOC_ENUM_EXT("Mono To Stereo",
-		     tegra210_dmic_mono_conv_enum, tegra210_dmic_get_control,
-		     tegra210_dmic_put_control),
+		     tegra210_dmic_mono_conv_enum,
+		     tegra210_dmic_get_mono_to_stereo,
+		     tegra210_dmic_put_mono_to_stereo),
 	SOC_ENUM_EXT("Stereo To Mono",
-		     tegra210_dmic_stereo_conv_enum, tegra210_dmic_get_control,
-		     tegra210_dmic_put_control),
+		     tegra210_dmic_stereo_conv_enum,
+		     tegra210_dmic_get_stereo_to_mono,
+		     tegra210_dmic_put_stereo_to_mono),
 	SOC_ENUM_EXT("OSR Value", tegra210_dmic_osr_enum,
-		     tegra210_dmic_get_control, tegra210_dmic_put_control),
+		     tegra210_dmic_get_osr_val, tegra210_dmic_put_osr_val),
 	SOC_ENUM_EXT("LR Polarity Select", tegra210_dmic_lrsel_enum,
-		     tegra210_dmic_get_control, tegra210_dmic_put_control),
+		     tegra210_dmic_get_pol_sel, tegra210_dmic_put_pol_sel),
 };
 
 static const struct snd_soc_component_driver tegra210_dmic_compnt = {

[PATCH 5.10 081/130] ASoC: tegra: Fix kcontrol put callback in DSPK

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit d6202a57e79d102271d38c34481fedc9d4c79694 upstream.

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the DSPK driver accordingly.

Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver")
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-11-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra186_dspk.c |  178 ++++++++++++++++++++++++++++++++--------
 1 file changed, 146 insertions(+), 32 deletions(-)

--- a/sound/soc/tegra/tegra186_dspk.c
+++ b/sound/soc/tegra/tegra186_dspk.c
@@ -26,50 +26,162 @@ static const struct reg_default tegra186
 	{ TEGRA186_DSPK_CODEC_CTRL,  0x03000000 },
 };
 
-static int tegra186_dspk_get_control(struct snd_kcontrol *kcontrol,
+static int tegra186_dspk_get_fifo_th(struct snd_kcontrol *kcontrol,
 				     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
 	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
 
-	if (strstr(kcontrol->id.name, "FIFO Threshold"))
-		ucontrol->value.integer.value[0] = dspk->rx_fifo_th;
-	else if (strstr(kcontrol->id.name, "OSR Value"))
-		ucontrol->value.enumerated.item[0] = dspk->osr_val;
-	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		ucontrol->value.enumerated.item[0] = dspk->lrsel;
-	else if (strstr(kcontrol->id.name, "Channel Select"))
-		ucontrol->value.enumerated.item[0] = dspk->ch_sel;
-	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		ucontrol->value.enumerated.item[0] = dspk->mono_to_stereo;
-	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		ucontrol->value.enumerated.item[0] = dspk->stereo_to_mono;
+	ucontrol->value.integer.value[0] = dspk->rx_fifo_th;
 
 	return 0;
 }
 
-static int tegra186_dspk_put_control(struct snd_kcontrol *kcontrol,
+static int tegra186_dspk_put_fifo_th(struct snd_kcontrol *kcontrol,
 				     struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
 	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	int value = ucontrol->value.integer.value[0];
 
-	if (strstr(kcontrol->id.name, "FIFO Threshold"))
-		dspk->rx_fifo_th = ucontrol->value.integer.value[0];
-	else if (strstr(kcontrol->id.name, "OSR Value"))
-		dspk->osr_val = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "LR Polarity Select"))
-		dspk->lrsel = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "Channel Select"))
-		dspk->ch_sel = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "Mono To Stereo"))
-		dspk->mono_to_stereo = ucontrol->value.enumerated.item[0];
-	else if (strstr(kcontrol->id.name, "Stereo To Mono"))
-		dspk->stereo_to_mono = ucontrol->value.enumerated.item[0];
+	if (value == dspk->rx_fifo_th)
+		return 0;
+
+	dspk->rx_fifo_th = value;
+
+	return 1;
+}
+
+static int tegra186_dspk_get_osr_val(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.enumerated.item[0] = dspk->osr_val;
+
+	return 0;
+}
+
+static int tegra186_dspk_put_osr_val(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dspk->osr_val)
+		return 0;
+
+	dspk->osr_val = value;
+
+	return 1;
+}
+
+static int tegra186_dspk_get_pol_sel(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.enumerated.item[0] = dspk->lrsel;
+
+	return 0;
+}
+
+static int tegra186_dspk_put_pol_sel(struct snd_kcontrol *kcontrol,
+				     struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dspk->lrsel)
+		return 0;
+
+	dspk->lrsel = value;
+
+	return 1;
+}
+
+static int tegra186_dspk_get_ch_sel(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.enumerated.item[0] = dspk->ch_sel;
+
+	return 0;
+}
+
+static int tegra186_dspk_put_ch_sel(struct snd_kcontrol *kcontrol,
+				    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dspk->ch_sel)
+		return 0;
+
+	dspk->ch_sel = value;
+
+	return 1;
+}
+
+static int tegra186_dspk_get_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.enumerated.item[0] = dspk->mono_to_stereo;
+
+	return 0;
+}
+
+static int tegra186_dspk_put_mono_to_stereo(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dspk->mono_to_stereo)
+		return 0;
+
+	dspk->mono_to_stereo = value;
+
+	return 1;
+}
+
+static int tegra186_dspk_get_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+
+	ucontrol->value.enumerated.item[0] = dspk->stereo_to_mono;
 
 	return 0;
 }
 
+static int tegra186_dspk_put_stereo_to_mono(struct snd_kcontrol *kcontrol,
+					    struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *codec = snd_soc_kcontrol_component(kcontrol);
+	struct tegra186_dspk *dspk = snd_soc_component_get_drvdata(codec);
+	unsigned int value = ucontrol->value.enumerated.item[0];
+
+	if (value == dspk->stereo_to_mono)
+		return 0;
+
+	dspk->stereo_to_mono = value;
+
+	return 1;
+}
+
 static int __maybe_unused tegra186_dspk_runtime_suspend(struct device *dev)
 {
 	struct tegra186_dspk *dspk = dev_get_drvdata(dev);
@@ -278,17 +390,19 @@ static const struct soc_enum tegra186_ds
 static const struct snd_kcontrol_new tegrat186_dspk_controls[] = {
 	SOC_SINGLE_EXT("FIFO Threshold", SND_SOC_NOPM, 0,
 		       TEGRA186_DSPK_RX_FIFO_DEPTH - 1, 0,
-		       tegra186_dspk_get_control, tegra186_dspk_put_control),
+		       tegra186_dspk_get_fifo_th, tegra186_dspk_put_fifo_th),
 	SOC_ENUM_EXT("OSR Value", tegra186_dspk_osr_enum,
-		     tegra186_dspk_get_control, tegra186_dspk_put_control),
+		     tegra186_dspk_get_osr_val, tegra186_dspk_put_osr_val),
 	SOC_ENUM_EXT("LR Polarity Select", tegra186_dspk_lrsel_enum,
-		     tegra186_dspk_get_control, tegra186_dspk_put_control),
+		     tegra186_dspk_get_pol_sel, tegra186_dspk_put_pol_sel),
 	SOC_ENUM_EXT("Channel Select", tegra186_dspk_ch_sel_enum,
-		     tegra186_dspk_get_control, tegra186_dspk_put_control),
+		     tegra186_dspk_get_ch_sel, tegra186_dspk_put_ch_sel),
 	SOC_ENUM_EXT("Mono To Stereo", tegra186_dspk_mono_conv_enum,
-		     tegra186_dspk_get_control, tegra186_dspk_put_control),
+		     tegra186_dspk_get_mono_to_stereo,
+		     tegra186_dspk_put_mono_to_stereo),
 	SOC_ENUM_EXT("Stereo To Mono", tegra186_dspk_stereo_conv_enum,
-		     tegra186_dspk_get_control, tegra186_dspk_put_control),
+		     tegra186_dspk_get_stereo_to_mono,
+		     tegra186_dspk_put_stereo_to_mono),
 };
 
 static const struct snd_soc_component_driver tegra186_dspk_cmpnt = {

[PATCH 5.10 082/130] ASoC: tegra: Fix kcontrol put callback in AHUB

[Greg Kroah-Hartman]

From: Sameer Pujar <spujar@nvidia.com>

commit a4e37950c9e9b126f9cbee79b8ab94a94646dcf1 upstream.

The kcontrol put callback is expected to return 1 when there is change
in HW or when the update is acknowledged by driver. This would ensure
that change notifications are sent to subscribed applications. Update
the AHUB driver accordingly.

Fixes: 16e1bcc2caf4 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Suggested-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1637219231-406-12-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/soc/tegra/tegra210_ahub.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/sound/soc/tegra/tegra210_ahub.c
+++ b/sound/soc/tegra/tegra210_ahub.c
@@ -62,6 +62,7 @@ static int tegra_ahub_put_value_enum(str
 	unsigned int *item = uctl->value.enumerated.item;
 	unsigned int value = e->values[item[0]];
 	unsigned int i, bit_pos, reg_idx = 0, reg_val = 0;
+	int change = 0;
 
 	if (item[0] >= e->items)
 		return -EINVAL;
@@ -86,12 +87,14 @@ static int tegra_ahub_put_value_enum(str
 
 		/* Update widget power if state has changed */
 		if (snd_soc_component_test_bits(cmpnt, update[i].reg,
-						update[i].mask, update[i].val))
-			snd_soc_dapm_mux_update_power(dapm, kctl, item[0], e,
-						      &update[i]);
+						update[i].mask,
+						update[i].val))
+			change |= snd_soc_dapm_mux_update_power(dapm, kctl,
+								item[0], e,
+								&update[i]);
 	}
 
-	return 0;
+	return change;
 }
 
 static struct snd_soc_dai_driver tegra210_ahub_dais[] = {

[PATCH 5.10 083/130] rxrpc: Fix rxrpc_peer leak in rxrpc_look_up_bundle()

[Greg Kroah-Hartman]

From: Eiichi Tsukata <eiichi.tsukata@nutanix.com>

commit ca77fba821351190777b236ce749d7c4d353102e upstream.

Need to call rxrpc_put_peer() for bundle candidate before kfree() as it
holds a ref to rxrpc_peer.

[DH: v2: Changed to abstract out the bundle freeing code into a function]

Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager")
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20211121041608.133740-1-eiichi.tsukata@nutanix.com/ # v1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/conn_client.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/net/rxrpc/conn_client.c
+++ b/net/rxrpc/conn_client.c
@@ -135,16 +135,20 @@ struct rxrpc_bundle *rxrpc_get_bundle(st
 	return bundle;
 }
 
+static void rxrpc_free_bundle(struct rxrpc_bundle *bundle)
+{
+	rxrpc_put_peer(bundle->params.peer);
+	kfree(bundle);
+}
+
 void rxrpc_put_bundle(struct rxrpc_bundle *bundle)
 {
 	unsigned int d = bundle->debug_id;
 	unsigned int u = atomic_dec_return(&bundle->usage);
 
 	_debug("PUT B=%x %u", d, u);
-	if (u == 0) {
-		rxrpc_put_peer(bundle->params.peer);
-		kfree(bundle);
-	}
+	if (u == 0)
+		rxrpc_free_bundle(bundle);
 }
 
 /*
@@ -334,7 +338,7 @@ static struct rxrpc_bundle *rxrpc_look_u
 	return candidate;
 
 found_bundle_free:
-	kfree(candidate);
+	rxrpc_free_bundle(candidate);
 found_bundle:
 	rxrpc_get_bundle(bundle);
 	spin_unlock(&local->client_bundles_lock);

[PATCH 5.10 084/130] rxrpc: Fix rxrpc_local leak in rxrpc_lookup_peer()

[Greg Kroah-Hartman]

From: Eiichi Tsukata <eiichi.tsukata@nutanix.com>

commit beacff50edbd6c9659a6f15fc7f6126909fade29 upstream.

Need to call rxrpc_put_local() for peer candidate before kfree() as it
holds a ref to rxrpc_local.

[DH: v2: Changed to abstract the peer freeing code out into a function]

Fixes: 9ebeddef58c4 ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record")
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/all/20211121041608.133740-2-eiichi.tsukata@nutanix.com/ # v1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/peer_object.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/net/rxrpc/peer_object.c
+++ b/net/rxrpc/peer_object.c
@@ -299,6 +299,12 @@ static struct rxrpc_peer *rxrpc_create_p
 	return peer;
 }
 
+static void rxrpc_free_peer(struct rxrpc_peer *peer)
+{
+	rxrpc_put_local(peer->local);
+	kfree_rcu(peer, rcu);
+}
+
 /*
  * Set up a new incoming peer.  There shouldn't be any other matching peers
  * since we've already done a search in the list from the non-reentrant context
@@ -365,7 +371,7 @@ struct rxrpc_peer *rxrpc_lookup_peer(str
 		spin_unlock_bh(&rxnet->peer_hash_lock);
 
 		if (peer)
-			kfree(candidate);
+			rxrpc_free_peer(candidate);
 		else
 			peer = candidate;
 	}
@@ -420,8 +426,7 @@ static void __rxrpc_put_peer(struct rxrp
 	list_del_init(&peer->keepalive_link);
 	spin_unlock_bh(&rxnet->peer_hash_lock);
 
-	rxrpc_put_local(peer->local);
-	kfree_rcu(peer, rcu);
+	rxrpc_free_peer(peer);
 }
 
 /*
@@ -457,8 +462,7 @@ void rxrpc_put_peer_locked(struct rxrpc_
 	if (n == 0) {
 		hash_del_rcu(&peer->hash_link);
 		list_del_init(&peer->keepalive_link);
-		rxrpc_put_local(peer->local);
-		kfree_rcu(peer, rcu);
+		rxrpc_free_peer(peer);
 	}
 }
 

[PATCH 5.10 085/130] ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec

[Greg Kroah-Hartman]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

commit ae26c08e6c8071ba8febb0c7c0829da96c75248c upstream.

We've added quirks for ESS8336 but missed CML, add quirks for both LP
and H versions.

BugLink: https://github.com/thesofproject/linux/issues/3248
Fixes: 9d36ceab9415 ("ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211122232254.23362-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 sound/hda/intel-dsp-config.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -251,6 +251,11 @@ static const struct config_entry config_
 		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x02c8,
 	},
+	{
+		.flags = FLAG_SOF,
+		.device = 0x02c8,
+		.codec_hid = "ESSX8336",
+	},
 /* Cometlake-H */
 	{
 		.flags = FLAG_SOF,
@@ -275,6 +280,11 @@ static const struct config_entry config_
 		.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
 		.device = 0x06c8,
 	},
+		{
+		.flags = FLAG_SOF,
+		.device = 0x06c8,
+		.codec_hid = "ESSX8336",
+	},
 #endif
 
 /* Icelake */

[PATCH 5.10 086/130] net: usb: lan78xx: lan78xx_phy_init(): use PHY_POLL instead of "0" if no IRQ is available

[Greg Kroah-Hartman]

From: Sven Schuchmann <schuchmann@schleissheimer.de>

commit 817b653160db9852d5a0498a31f047e18ce27e5b upstream.

On most systems request for IRQ 0 will fail, phylib will print an error message
and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ
is available.

Fixes: cc89c323a30e ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/lan78xx.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2128,7 +2128,7 @@ static int lan78xx_phy_init(struct lan78
 	if (dev->domain_data.phyirq > 0)
 		phydev->irq = dev->domain_data.phyirq;
 	else
-		phydev->irq = 0;
+		phydev->irq = PHY_POLL;
 	netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq);
 
 	/* set to AUTOMDIX */

[PATCH 5.10 087/130] net: marvell: mvpp2: Fix the computation of shared CPUs

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

commit b83f5ac7d922e69a109261f5f940eebbd4e514c4 upstream.

'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.

Use 'bitmap_set()' instead in order not to set unexpected bits.

Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6918,7 +6918,7 @@ static int mvpp2_probe(struct platform_d
 
 	shared = num_present_cpus() - priv->nthreads;
 	if (shared > 0)
-		bitmap_fill(&priv->lock_map,
+		bitmap_set(&priv->lock_map, 0,
 			    min_t(int, shared, MVPP2_MAX_THREADS));
 
 	for (i = 0; i < MVPP2_MAX_THREADS; i++) {

[PATCH 5.10 088/130] dpaa2-eth: destroy workqueue at the end of remove function

[Greg Kroah-Hartman]

From: Dongliang Mu <mudongliangabcd@gmail.com>

commit f4a8adbfe4841491b60c14fe610571e1422359f9 upstream.

The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.

Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.

Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4432,6 +4432,8 @@ static int dpaa2_eth_remove(struct fsl_m
 
 	fsl_mc_portal_free(priv->mc_io);
 
+	destroy_workqueue(priv->dpaa2_ptp_wq);
+
 	dev_dbg(net_dev->dev.parent, "Removed interface %s\n", net_dev->name);
 
 	free_netdev(net_dev);

[PATCH 5.10 089/130] net: annotate data-races on txq->xmit_lock_owner

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 7a10d8c810cfad3e79372d7d1c77899d86cd6662 upstream.

syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner
without annotations.

No serious issue there, let's document what is happening there.

BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit

write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0:
 __netif_tx_unlock include/linux/netdevice.h:4437 [inline]
 __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229
 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
 macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
 __netdev_start_xmit include/linux/netdevice.h:4987 [inline]
 netdev_start_xmit include/linux/netdevice.h:5001 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3590
 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
 neigh_hh_output include/net/neighbour.h:511 [inline]
 neigh_output include/net/neighbour.h:525 [inline]
 ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:450 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
 expire_timers+0x116/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x410 kernel/time/timer.c:1734
 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20

read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1:
 __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213
 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265
 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline]
 macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567
 __netdev_start_xmit include/linux/netdevice.h:4987 [inline]
 netdev_start_xmit include/linux/netdevice.h:5001 [inline]
 xmit_one+0x105/0x2f0 net/core/dev.c:3590
 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606
 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342
 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817
 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194
 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259
 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523
 neigh_output include/net/neighbour.h:527 [inline]
 ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126
 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
 ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201
 NF_HOOK_COND include/linux/netfilter.h:296 [inline]
 ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224
 dst_output include/net/dst.h:450 [inline]
 NF_HOOK include/linux/netfilter.h:307 [inline]
 ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508
 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702
 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898
 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421
 expire_timers+0x116/0x240 kernel/time/timer.c:1466
 __run_timers+0x368/0x410 kernel/time/timer.c:1734
 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747
 __do_softirq+0x158/0x2de kernel/softirq.c:558
 __irq_exit_rcu kernel/softirq.c:636 [inline]
 irq_exit_rcu+0x37/0x70 kernel/softirq.c:648
 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097
 asm_sysvec_apic_timer_interrupt+0x12/0x20
 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443
 folio_test_anon include/linux/page-flags.h:581 [inline]
 PageAnon include/linux/page-flags.h:586 [inline]
 zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347
 zap_pmd_range mm/memory.c:1467 [inline]
 zap_pud_range mm/memory.c:1496 [inline]
 zap_p4d_range mm/memory.c:1517 [inline]
 unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538
 unmap_single_vma+0x157/0x210 mm/memory.c:1583
 unmap_vmas+0xd0/0x180 mm/memory.c:1615
 exit_mmap+0x23d/0x470 mm/mmap.c:3170
 __mmput+0x27/0x1b0 kernel/fork.c:1113
 mmput+0x3d/0x50 kernel/fork.c:1134
 exit_mm+0xdb/0x170 kernel/exit.c:507
 do_exit+0x608/0x17a0 kernel/exit.c:819
 do_group_exit+0xce/0x180 kernel/exit.c:929
 get_signal+0xfc3/0x1550 kernel/signal.c:2852
 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868
 handle_signal_work kernel/entry/common.c:148 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:172 [inline]
 exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207
 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300
 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0xffffffff

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G        W         5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20211130170155.2331929-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/netdevice.h |   19 +++++++++++++------
 net/core/dev.c            |    5 ++++-
 2 files changed, 17 insertions(+), 7 deletions(-)

--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4212,7 +4212,8 @@ static inline u32 netif_msg_init(int deb
 static inline void __netif_tx_lock(struct netdev_queue *txq, int cpu)
 {
 	spin_lock(&txq->_xmit_lock);
-	txq->xmit_lock_owner = cpu;
+	/* Pairs with READ_ONCE() in __dev_queue_xmit() */
+	WRITE_ONCE(txq->xmit_lock_owner, cpu);
 }
 
 static inline bool __netif_tx_acquire(struct netdev_queue *txq)
@@ -4229,26 +4230,32 @@ static inline void __netif_tx_release(st
 static inline void __netif_tx_lock_bh(struct netdev_queue *txq)
 {
 	spin_lock_bh(&txq->_xmit_lock);
-	txq->xmit_lock_owner = smp_processor_id();
+	/* Pairs with READ_ONCE() in __dev_queue_xmit() */
+	WRITE_ONCE(txq->xmit_lock_owner, smp_processor_id());
 }
 
 static inline bool __netif_tx_trylock(struct netdev_queue *txq)
 {
 	bool ok = spin_trylock(&txq->_xmit_lock);
-	if (likely(ok))
-		txq->xmit_lock_owner = smp_processor_id();
+
+	if (likely(ok)) {
+		/* Pairs with READ_ONCE() in __dev_queue_xmit() */
+		WRITE_ONCE(txq->xmit_lock_owner, smp_processor_id());
+	}
 	return ok;
 }
 
 static inline void __netif_tx_unlock(struct netdev_queue *txq)
 {
-	txq->xmit_lock_owner = -1;
+	/* Pairs with READ_ONCE() in __dev_queue_xmit() */
+	WRITE_ONCE(txq->xmit_lock_owner, -1);
 	spin_unlock(&txq->_xmit_lock);
 }
 
 static inline void __netif_tx_unlock_bh(struct netdev_queue *txq)
 {
-	txq->xmit_lock_owner = -1;
+	/* Pairs with READ_ONCE() in __dev_queue_xmit() */
+	WRITE_ONCE(txq->xmit_lock_owner, -1);
 	spin_unlock_bh(&txq->_xmit_lock);
 }
 
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4147,7 +4147,10 @@ static int __dev_queue_xmit(struct sk_bu
 	if (dev->flags & IFF_UP) {
 		int cpu = smp_processor_id(); /* ok because BHs are off */
 
-		if (txq->xmit_lock_owner != cpu) {
+		/* Other cpus might concurrently change txq->xmit_lock_owner
+		 * to -1 or to their cpu id, but not to our id.
+		 */
+		if (READ_ONCE(txq->xmit_lock_owner) != cpu) {
 			if (dev_xmit_recursion())
 				goto recursion_alert;
 

[PATCH 5.10 090/130] ipv4: convert fib_num_tclassid_users to atomic_t

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

commit 213f5f8f31f10aa1e83187ae20fb7fa4e626b724 upstream.

Before commit faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.

After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.

Fixes: faa041a40b9f ("ipv4: Create cleanup helper for fib_nh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/ip_fib.h     |    2 +-
 include/net/netns/ipv4.h |    2 +-
 net/ipv4/fib_frontend.c  |    2 +-
 net/ipv4/fib_rules.c     |    4 ++--
 net/ipv4/fib_semantics.c |    4 ++--
 5 files changed, 7 insertions(+), 7 deletions(-)

--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -437,7 +437,7 @@ int fib_validate_source(struct sk_buff *
 #ifdef CONFIG_IP_ROUTE_CLASSID
 static inline int fib_num_tclassid_users(struct net *net)
 {
-	return net->ipv4.fib_num_tclassid_users;
+	return atomic_read(&net->ipv4.fib_num_tclassid_users);
 }
 #else
 static inline int fib_num_tclassid_users(struct net *net)
--- a/include/net/netns/ipv4.h
+++ b/include/net/netns/ipv4.h
@@ -61,7 +61,7 @@ struct netns_ipv4 {
 #endif
 	bool			fib_has_custom_local_routes;
 #ifdef CONFIG_IP_ROUTE_CLASSID
-	int			fib_num_tclassid_users;
+	atomic_t		fib_num_tclassid_users;
 #endif
 	struct hlist_head	*fib_table_hash;
 	bool			fib_offload_disabled;
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -1578,7 +1578,7 @@ static int __net_init fib_net_init(struc
 	int error;
 
 #ifdef CONFIG_IP_ROUTE_CLASSID
-	net->ipv4.fib_num_tclassid_users = 0;
+	atomic_set(&net->ipv4.fib_num_tclassid_users, 0);
 #endif
 	error = ip_fib_net_init(net);
 	if (error < 0)
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -264,7 +264,7 @@ static int fib4_rule_configure(struct fi
 	if (tb[FRA_FLOW]) {
 		rule4->tclassid = nla_get_u32(tb[FRA_FLOW]);
 		if (rule4->tclassid)
-			net->ipv4.fib_num_tclassid_users++;
+			atomic_inc(&net->ipv4.fib_num_tclassid_users);
 	}
 #endif
 
@@ -296,7 +296,7 @@ static int fib4_rule_delete(struct fib_r
 
 #ifdef CONFIG_IP_ROUTE_CLASSID
 	if (((struct fib4_rule *)rule)->tclassid)
-		net->ipv4.fib_num_tclassid_users--;
+		atomic_dec(&net->ipv4.fib_num_tclassid_users);
 #endif
 	net->ipv4.fib_has_custom_rules = true;
 
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -222,7 +222,7 @@ void fib_nh_release(struct net *net, str
 {
 #ifdef CONFIG_IP_ROUTE_CLASSID
 	if (fib_nh->nh_tclassid)
-		net->ipv4.fib_num_tclassid_users--;
+		atomic_dec(&net->ipv4.fib_num_tclassid_users);
 #endif
 	fib_nh_common_release(&fib_nh->nh_common);
 }
@@ -633,7 +633,7 @@ int fib_nh_init(struct net *net, struct
 #ifdef CONFIG_IP_ROUTE_CLASSID
 	nh->nh_tclassid = cfg->fc_flow;
 	if (nh->nh_tclassid)
-		net->ipv4.fib_num_tclassid_users++;
+		atomic_inc(&net->ipv4.fib_num_tclassid_users);
 #endif
 #ifdef CONFIG_IP_ROUTE_MULTIPATH
 	nh->fib_nh_weight = nh_weight;

[PATCH 5.10 091/130] net/smc: fix wrong list_del in smc_lgr_cleanup_early

[Greg Kroah-Hartman]

From: Dust Li <dust.li@linux.alibaba.com>

commit 789b6cc2a5f9123b9c549b886fdc47c865cfe0ba upstream.

smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.

This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:

[  231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000
[  231.278222] ------------[ cut here ]------------
[  231.278726] kernel BUG at lib/list_debug.c:53!
[  231.279326] invalid opcode: 0000 [#1] SMP NOPTI
[  231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435
[  231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
[  231.281248] Workqueue: events smc_link_down_work
[  231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90
[  231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c
60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f>
0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc
[  231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292
[  231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000
[  231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040
[  231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001
[  231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001
[  231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003
[  231.288337] FS:  0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[  231.289160] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0
[  231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  231.291940] Call Trace:
[  231.292211]  smc_lgr_terminate_sched+0x53/0xa0
[  231.292677]  smc_switch_conns+0x75/0x6b0
[  231.293085]  ? update_load_avg+0x1a6/0x590
[  231.293517]  ? ttwu_do_wakeup+0x17/0x150
[  231.293907]  ? update_load_avg+0x1a6/0x590
[  231.294317]  ? newidle_balance+0xca/0x3d0
[  231.294716]  smcr_link_down+0x50/0x1a0
[  231.295090]  ? __wake_up_common_lock+0x77/0x90
[  231.295534]  smc_link_down_work+0x46/0x60
[  231.295933]  process_one_work+0x18b/0x350

Fixes: a0a62ee15a829 ("net/smc: separate locks for SMCD and SMCR link group lists")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/smc/smc_core.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -204,18 +204,17 @@ static void smc_lgr_unregister_conn(stru
 void smc_lgr_cleanup_early(struct smc_connection *conn)
 {
 	struct smc_link_group *lgr = conn->lgr;
-	struct list_head *lgr_list;
 	spinlock_t *lgr_lock;
 
 	if (!lgr)
 		return;
 
 	smc_conn_free(conn);
-	lgr_list = smc_lgr_list_head(lgr, &lgr_lock);
+	smc_lgr_list_head(lgr, &lgr_lock);
 	spin_lock_bh(lgr_lock);
 	/* do not use this link group for new connections */
-	if (!list_empty(lgr_list))
-		list_del_init(lgr_list);
+	if (!list_empty(&lgr->list))
+		list_del_init(&lgr->list);
 	spin_unlock_bh(lgr_lock);
 	__smc_lgr_terminate(lgr, true);
 }

[PATCH 5.10 092/130] net/rds: correct socket tunable error in rds_tcp_tune()

[Greg Kroah-Hartman]

From: William Kucharski <william.kucharski@oracle.com>

commit 19f36edf14bcdb783aef3af8217df96f76a8ce34 upstream.

Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.

Fixes: c6a58ffed536 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Signed-off-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rds/tcp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rds/tcp.c
+++ b/net/rds/tcp.c
@@ -500,7 +500,7 @@ void rds_tcp_tune(struct socket *sock)
 		sk->sk_userlocks |= SOCK_SNDBUF_LOCK;
 	}
 	if (rtn->rcvbuf_size > 0) {
-		sk->sk_sndbuf = rtn->rcvbuf_size;
+		sk->sk_rcvbuf = rtn->rcvbuf_size;
 		sk->sk_userlocks |= SOCK_RCVBUF_LOCK;
 	}
 	release_sock(sk);

[PATCH 5.10 093/130] net/smc: Keep smc_close_final rc during active close

[Greg Kroah-Hartman]

From: Tony Lu <tonylu@linux.alibaba.com>

commit 00e158fb91dfaff3f94746f260d11f1a4853506e upstream.

When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.

Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.

Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/smc/smc_close.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/smc/smc_close.c
+++ b/net/smc/smc_close.c
@@ -195,6 +195,7 @@ int smc_close_active(struct smc_sock *sm
 	int old_state;
 	long timeout;
 	int rc = 0;
+	int rc1 = 0;
 
 	timeout = current->flags & PF_EXITING ?
 		  0 : sock_flag(sk, SOCK_LINGER) ?
@@ -232,8 +233,11 @@ again:
 			/* actively shutdown clcsock before peer close it,
 			 * prevent peer from entering TIME_WAIT state.
 			 */
-			if (smc->clcsock && smc->clcsock->sk)
-				rc = kernel_sock_shutdown(smc->clcsock, SHUT_RDWR);
+			if (smc->clcsock && smc->clcsock->sk) {
+				rc1 = kernel_sock_shutdown(smc->clcsock,
+							   SHUT_RDWR);
+				rc = rc ? rc : rc1;
+			}
 		} else {
 			/* peer event has changed the state */
 			goto again;

[PATCH 5.10 094/130] drm/msm/a6xx: Allocate enough space for GMU registers

[Greg Kroah-Hartman]

From: Douglas Anderson <dianders@chromium.org>

commit b4d25abf9720b69a03465b09d0d62d1998ed6708 upstream.

In commit 142639a52a01 ("drm/msm/a6xx: fix crashstate capture for
A650") we changed a6xx_get_gmu_registers() to read 3 sets of
registers. Unfortunately, we didn't change the memory allocation for
the array. That leads to a KASAN warning (this was on the chromeos-5.4
kernel, which has the problematic commit backported to it):

  BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430
  Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209
  CPU: 5 PID: 209 Comm: A618-worker Tainted: G        W         5.4.156-lockdep #22
  Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT)
  Call trace:
   dump_backtrace+0x0/0x248
   show_stack+0x20/0x2c
   dump_stack+0x128/0x1ec
   print_address_description+0x88/0x4a0
   __kasan_report+0xfc/0x120
   kasan_report+0x10/0x18
   __asan_report_store8_noabort+0x1c/0x24
   _a6xx_get_gmu_registers+0x144/0x430
   a6xx_gpu_state_get+0x330/0x25d4
   msm_gpu_crashstate_capture+0xa0/0x84c
   recover_worker+0x328/0x838
   kthread_worker_fn+0x32c/0x574
   kthread+0x2dc/0x39c
   ret_from_fork+0x10/0x18

  Allocated by task 209:
   __kasan_kmalloc+0xfc/0x1c4
   kasan_kmalloc+0xc/0x14
   kmem_cache_alloc_trace+0x1f0/0x2a0
   a6xx_gpu_state_get+0x164/0x25d4
   msm_gpu_crashstate_capture+0xa0/0x84c
   recover_worker+0x328/0x838
   kthread_worker_fn+0x32c/0x574
   kthread+0x2dc/0x39c
   ret_from_fork+0x10/0x18

Fixes: 142639a52a01 ("drm/msm/a6xx: fix crashstate capture for A650")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20211103153049.1.Idfa574ccb529d17b69db3a1852e49b580132035c@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c
@@ -777,12 +777,12 @@ static void a6xx_get_gmu_registers(struc
 	struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu);
 
 	a6xx_state->gmu_registers = state_kcalloc(a6xx_state,
-		2, sizeof(*a6xx_state->gmu_registers));
+		3, sizeof(*a6xx_state->gmu_registers));
 
 	if (!a6xx_state->gmu_registers)
 		return;
 
-	a6xx_state->nr_gmu_registers = 2;
+	a6xx_state->nr_gmu_registers = 3;
 
 	/* Get the CX GMU registers from AHB */
 	_a6xx_get_gmu_registers(gpu, a6xx_state, &a6xx_gmu_reglist[0],

[PATCH 5.10 095/130] drm/msm: Do hw_init() before capturing GPU state

[Greg Kroah-Hartman]

From: Rob Clark <robdclark@chromium.org>

commit e4840d537c2c6b1189d4de16ee0f4820e069dcea upstream.

In particular, we need to ensure all the necessary blocks are switched
to 64b mode (a5xx+) otherwise the high bits of the address of the BO to
snapshot state into will be ignored, resulting in:

  *** gpu fault: ttbr0=0000000000000000 iova=0000000000012000 dir=READ type=TRANSLATION source=CP (0,0,0,0)
  platform 506a000.gmu: [drm:a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set BOOT_SLUMBER: 0x0

Fixes: 4f776f4511c7 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20211108180122.487859-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/msm/msm_debugfs.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/msm/msm_debugfs.c
+++ b/drivers/gpu/drm/msm/msm_debugfs.c
@@ -77,6 +77,7 @@ static int msm_gpu_open(struct inode *in
 		goto free_priv;
 
 	pm_runtime_get_sync(&gpu->pdev->dev);
+	msm_gpu_hw_init(gpu);
 	show_priv->state = gpu->funcs->gpu_state_get(gpu);
 	pm_runtime_put_sync(&gpu->pdev->dev);
 

[PATCH 5.10 096/130] atlantic: Increase delay for fw transactions

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <dbezrukov@marvell.com>

commit aa1dcb5646fdf34a15763facf4bf5e482a2814ca upstream.

The max waiting period (of 1 ms) while reading the data from FW shared
buffer is too small for certain types of data (e.g., stats). There's a
chance that FW could be updating buffer at the same time and driver
would be unsuccessful in reading data. Firmware manual recommends to
have 1 sec timeout to fix this issue.

Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops")
Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
@@ -84,7 +84,7 @@ static int hw_atl2_shared_buffer_read_bl
 			if (cnt > AQ_A2_FW_READ_TRY_MAX)
 				return -ETIME;
 			if (tid1.transaction_cnt_a != tid1.transaction_cnt_b)
-				udelay(1);
+				mdelay(1);
 		} while (tid1.transaction_cnt_a != tid1.transaction_cnt_b);
 
 		hw_atl2_mif_shared_buf_read(self, offset, (u32 *)data, dwords);
@@ -339,8 +339,11 @@ static int aq_a2_fw_update_stats(struct
 {
 	struct hw_atl2_priv *priv = (struct hw_atl2_priv *)self->priv;
 	struct statistics_s stats;
+	int err;
 
-	hw_atl2_shared_buffer_read_safe(self, stats, &stats);
+	err = hw_atl2_shared_buffer_read_safe(self, stats, &stats);
+	if (err)
+		return err;
 
 #define AQ_SDELTA(_N_, _F_) (self->curr_stats._N_ += \
 			stats.msm._F_ - priv->last_stats.msm._F_)

[PATCH 5.10 097/130] atlatnic: enable Nbase-t speeds with base-t

[Greg Kroah-Hartman]

From: Nikita Danilov <ndanilov@aquantia.com>

commit aa685acd98eae25d5351e30288d6cfb65b9c80a5 upstream.

When 2.5G is advertised, N-Base should be advertised against the T-base
caps. N5G is out of use in baseline code and driver should treat both 5G
and N5G (and also 2.5G and N2.5G) equally from user perspective.

Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops")
Signed-off-by: Nikita Danilov <ndanilov@aquantia.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_common.h                |   25 ++++------
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c |    3 -
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c |    4 -
 3 files changed, 13 insertions(+), 19 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/aq_common.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
@@ -53,20 +53,19 @@
 
 #define AQ_NIC_RATE_10G		BIT(0)
 #define AQ_NIC_RATE_5G		BIT(1)
-#define AQ_NIC_RATE_5GSR	BIT(2)
-#define AQ_NIC_RATE_2G5		BIT(3)
-#define AQ_NIC_RATE_1G		BIT(4)
-#define AQ_NIC_RATE_100M	BIT(5)
-#define AQ_NIC_RATE_10M		BIT(6)
-#define AQ_NIC_RATE_1G_HALF	BIT(7)
-#define AQ_NIC_RATE_100M_HALF	BIT(8)
-#define AQ_NIC_RATE_10M_HALF	BIT(9)
+#define AQ_NIC_RATE_2G5		BIT(2)
+#define AQ_NIC_RATE_1G		BIT(3)
+#define AQ_NIC_RATE_100M	BIT(4)
+#define AQ_NIC_RATE_10M		BIT(5)
+#define AQ_NIC_RATE_1G_HALF	BIT(6)
+#define AQ_NIC_RATE_100M_HALF	BIT(7)
+#define AQ_NIC_RATE_10M_HALF	BIT(8)
 
-#define AQ_NIC_RATE_EEE_10G	BIT(10)
-#define AQ_NIC_RATE_EEE_5G	BIT(11)
-#define AQ_NIC_RATE_EEE_2G5	BIT(12)
-#define AQ_NIC_RATE_EEE_1G	BIT(13)
-#define AQ_NIC_RATE_EEE_100M	BIT(14)
+#define AQ_NIC_RATE_EEE_10G	BIT(9)
+#define AQ_NIC_RATE_EEE_5G	BIT(10)
+#define AQ_NIC_RATE_EEE_2G5	BIT(11)
+#define AQ_NIC_RATE_EEE_1G	BIT(12)
+#define AQ_NIC_RATE_EEE_100M	BIT(13)
 #define AQ_NIC_RATE_EEE_MSK     (AQ_NIC_RATE_EEE_10G |\
 				 AQ_NIC_RATE_EEE_5G |\
 				 AQ_NIC_RATE_EEE_2G5 |\
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
@@ -132,9 +132,6 @@ static enum hw_atl_fw2x_rate link_speed_
 	if (speed & AQ_NIC_RATE_5G)
 		rate |= FW2X_RATE_5G;
 
-	if (speed & AQ_NIC_RATE_5GSR)
-		rate |= FW2X_RATE_5G;
-
 	if (speed & AQ_NIC_RATE_2G5)
 		rate |= FW2X_RATE_2G5;
 
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
@@ -154,7 +154,7 @@ static void a2_link_speed_mask2fw(u32 sp
 {
 	link_options->rate_10G = !!(speed & AQ_NIC_RATE_10G);
 	link_options->rate_5G = !!(speed & AQ_NIC_RATE_5G);
-	link_options->rate_N5G = !!(speed & AQ_NIC_RATE_5GSR);
+	link_options->rate_N5G = link_options->rate_5G;
 	link_options->rate_2P5G = !!(speed & AQ_NIC_RATE_2G5);
 	link_options->rate_N2P5G = link_options->rate_2P5G;
 	link_options->rate_1G = !!(speed & AQ_NIC_RATE_1G);
@@ -192,8 +192,6 @@ static u32 a2_fw_lkp_to_mask(struct lkp_
 		rate |= AQ_NIC_RATE_10G;
 	if (lkp_link_caps->rate_5G)
 		rate |= AQ_NIC_RATE_5G;
-	if (lkp_link_caps->rate_N5G)
-		rate |= AQ_NIC_RATE_5GSR;
 	if (lkp_link_caps->rate_2P5G)
 		rate |= AQ_NIC_RATE_2G5;
 	if (lkp_link_caps->rate_1G)

[PATCH 5.10 098/130] atlantic: Fix to display FW bundle version instead of FW mac version.

[Greg Kroah-Hartman]

From: Sameer Saurabh <ssaurabh@marvell.com>

commit 2465c802232bc8d2b5bd83b55b08d05c11808704 upstream.

The correct way to reflect firmware version is to use bundle version.
Hence populating the same instead of MAC fw version.

Fixes: c1be0bf092bd2 ("net: atlantic: common functions needed for basic A2 init/deinit hw_ops")
Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
@@ -500,9 +500,9 @@ u32 hw_atl2_utils_get_fw_version(struct
 	hw_atl2_shared_buffer_read_safe(self, version, &version);
 
 	/* A2 FW version is stored in reverse order */
-	return version.mac.major << 24 |
-	       version.mac.minor << 16 |
-	       version.mac.build;
+	return version.bundle.major << 24 |
+	       version.bundle.minor << 16 |
+	       version.bundle.build;
 }
 
 int hw_atl2_utils_get_action_resolve_table_caps(struct aq_hw_s *self,

[PATCH 5.10 099/130] atlantic: Add missing DIDs and fix 115c.

[Greg Kroah-Hartman]

From: Nikita Danilov <ndanilov@aquantia.com>

commit 413d5e09caa5a11da9c7d72401ba0588466a04c0 upstream.

At the late production stages new dev ids were introduced. These are
now in production, so its important for the driver to recognize these.
And also fix the board caps for AQC115C adapter.

Fixes: b3f0c79cba206 ("net: atlantic: A2 hw_ops skeleton")
Signed-off-by: Nikita Danilov <ndanilov@aquantia.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_common.h       |    2 +
 drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c     |    7 +++++-
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c |   17 +++++++++++++++
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.h |    2 +
 4 files changed, 27 insertions(+), 1 deletion(-)

--- a/drivers/net/ethernet/aquantia/atlantic/aq_common.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_common.h
@@ -40,10 +40,12 @@
 
 #define AQ_DEVICE_ID_AQC113DEV	0x00C0
 #define AQ_DEVICE_ID_AQC113CS	0x94C0
+#define AQ_DEVICE_ID_AQC113CA	0x34C0
 #define AQ_DEVICE_ID_AQC114CS	0x93C0
 #define AQ_DEVICE_ID_AQC113	0x04C0
 #define AQ_DEVICE_ID_AQC113C	0x14C0
 #define AQ_DEVICE_ID_AQC115C	0x12C0
+#define AQ_DEVICE_ID_AQC116C	0x11C0
 
 #define HW_ATL_NIC_NAME "Marvell (aQuantia) AQtion 10Gbit Network Adapter"
 
--- a/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c
@@ -49,6 +49,8 @@ static const struct pci_device_id aq_pci
 	{ PCI_VDEVICE(AQUANTIA, AQ_DEVICE_ID_AQC113), },
 	{ PCI_VDEVICE(AQUANTIA, AQ_DEVICE_ID_AQC113C), },
 	{ PCI_VDEVICE(AQUANTIA, AQ_DEVICE_ID_AQC115C), },
+	{ PCI_VDEVICE(AQUANTIA, AQ_DEVICE_ID_AQC113CA), },
+	{ PCI_VDEVICE(AQUANTIA, AQ_DEVICE_ID_AQC116C), },
 
 	{}
 };
@@ -85,7 +87,10 @@ static const struct aq_board_revision_s
 	{ AQ_DEVICE_ID_AQC113CS,	AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc113, },
 	{ AQ_DEVICE_ID_AQC114CS,	AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc113, },
 	{ AQ_DEVICE_ID_AQC113C,		AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc113, },
-	{ AQ_DEVICE_ID_AQC115C,		AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc113, },
+	{ AQ_DEVICE_ID_AQC115C,		AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc115c, },
+	{ AQ_DEVICE_ID_AQC113CA,	AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc113, },
+	{ AQ_DEVICE_ID_AQC116C,		AQ_HWREV_ANY,	&hw_atl2_ops, &hw_atl2_caps_aqc116c, },
+
 };
 
 MODULE_DEVICE_TABLE(pci, aq_pci_tbl);
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c
@@ -72,6 +72,23 @@ const struct aq_hw_caps_s hw_atl2_caps_a
 			  AQ_NIC_RATE_10M_HALF,
 };
 
+const struct aq_hw_caps_s hw_atl2_caps_aqc115c = {
+	DEFAULT_BOARD_BASIC_CAPABILITIES,
+	.media_type = AQ_HW_MEDIA_TYPE_TP,
+	.link_speed_msk = AQ_NIC_RATE_2G5 |
+			  AQ_NIC_RATE_1G  |
+			  AQ_NIC_RATE_100M      |
+			  AQ_NIC_RATE_10M,
+};
+
+const struct aq_hw_caps_s hw_atl2_caps_aqc116c = {
+	DEFAULT_BOARD_BASIC_CAPABILITIES,
+	.media_type = AQ_HW_MEDIA_TYPE_TP,
+	.link_speed_msk = AQ_NIC_RATE_1G  |
+			  AQ_NIC_RATE_100M      |
+			  AQ_NIC_RATE_10M,
+};
+
 static u32 hw_atl2_sem_act_rslvr_get(struct aq_hw_s *self)
 {
 	return hw_atl_reg_glb_cpu_sem_get(self, HW_ATL2_FW_SM_ACT_RSLVR);
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.h
@@ -9,6 +9,8 @@
 #include "aq_common.h"
 
 extern const struct aq_hw_caps_s hw_atl2_caps_aqc113;
+extern const struct aq_hw_caps_s hw_atl2_caps_aqc115c;
+extern const struct aq_hw_caps_s hw_atl2_caps_aqc116c;
 extern const struct aq_hw_ops hw_atl2_ops;
 
 #endif /* HW_ATL2_H */

[PATCH 5.10 100/130] Remove Half duplex mode speed capabilities.

[Greg Kroah-Hartman]

From: Sameer Saurabh <ssaurabh@marvell.com>

commit 03fa512189eb9b55ded5f3e81ad638315555b340 upstream.

Since Half Duplex mode has been deprecated by the firmware, driver should
not advertise Half Duplex speed in ethtool support link speed values.

Fixes: 071a02046c262 ("net: atlantic: A2: half duplex support")
Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2.c
@@ -65,11 +65,8 @@ const struct aq_hw_caps_s hw_atl2_caps_a
 			  AQ_NIC_RATE_5G  |
 			  AQ_NIC_RATE_2G5 |
 			  AQ_NIC_RATE_1G  |
-			  AQ_NIC_RATE_1G_HALF   |
 			  AQ_NIC_RATE_100M      |
-			  AQ_NIC_RATE_100M_HALF |
-			  AQ_NIC_RATE_10M       |
-			  AQ_NIC_RATE_10M_HALF,
+			  AQ_NIC_RATE_10M,
 };
 
 const struct aq_hw_caps_s hw_atl2_caps_aqc115c = {

[PATCH 5.10 101/130] atlantic: Fix statistics logic for production hardware

[Greg Kroah-Hartman]

From: Dmitry Bogdanov <dbezrukov@marvell.com>

commit 2087ced0fc3a6d45203925750a2b1bcd5402e639 upstream.

B0 is the main and widespread device revision of atlantic2 HW. In the
current state, driver will incorrectly fetch the statistics for this
revision.

Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops")
Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_hw.h                    |    2 
 drivers/net/ethernet/aquantia/atlantic/aq_nic.c                   |   10 
 drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c      |   15 +
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils.h    |   38 +++
 drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c |  101 ++++++++--
 5 files changed, 139 insertions(+), 27 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/aq_hw.h
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_hw.h
@@ -80,6 +80,8 @@ struct aq_hw_link_status_s {
 };
 
 struct aq_stats_s {
+	u64 brc;
+	u64 btc;
 	u64 uprc;
 	u64 mprc;
 	u64 bprc;
--- a/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_nic.c
@@ -903,8 +903,14 @@ u64 *aq_nic_get_stats(struct aq_nic_s *s
 	data[++i] = stats->mbtc;
 	data[++i] = stats->bbrc;
 	data[++i] = stats->bbtc;
-	data[++i] = stats->ubrc + stats->mbrc + stats->bbrc;
-	data[++i] = stats->ubtc + stats->mbtc + stats->bbtc;
+	if (stats->brc)
+		data[++i] = stats->brc;
+	else
+		data[++i] = stats->ubrc + stats->mbrc + stats->bbrc;
+	if (stats->btc)
+		data[++i] = stats->btc;
+	else
+		data[++i] = stats->ubtc + stats->mbtc + stats->bbtc;
 	data[++i] = stats->dma_pkt_rc;
 	data[++i] = stats->dma_pkt_tc;
 	data[++i] = stats->dma_oct_rc;
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
@@ -867,12 +867,20 @@ static int hw_atl_fw1x_deinit(struct aq_
 int hw_atl_utils_update_stats(struct aq_hw_s *self)
 {
 	struct aq_stats_s *cs = &self->curr_stats;
+	struct aq_stats_s curr_stats = *cs;
 	struct hw_atl_utils_mbox mbox;
+	bool corrupted_stats = false;
 
 	hw_atl_utils_mpi_read_stats(self, &mbox);
 
-#define AQ_SDELTA(_N_) (self->curr_stats._N_ += \
-			mbox.stats._N_ - self->last_stats._N_)
+#define AQ_SDELTA(_N_)  \
+do { \
+	if (!corrupted_stats && \
+	    ((s64)(mbox.stats._N_ - self->last_stats._N_)) >= 0) \
+		curr_stats._N_ += mbox.stats._N_ - self->last_stats._N_; \
+	else \
+		corrupted_stats = true; \
+} while (0)
 
 	if (self->aq_link_status.mbps) {
 		AQ_SDELTA(uprc);
@@ -892,6 +900,9 @@ int hw_atl_utils_update_stats(struct aq_
 		AQ_SDELTA(bbrc);
 		AQ_SDELTA(bbtc);
 		AQ_SDELTA(dpc);
+
+		if (!corrupted_stats)
+			*cs = curr_stats;
 	}
 #undef AQ_SDELTA
 
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils.h
@@ -239,7 +239,8 @@ struct version_s {
 		u8 minor;
 		u16 build;
 	} phy;
-	u32 rsvd;
+	u32 drv_iface_ver:4;
+	u32 rsvd:28;
 };
 
 struct link_status_s {
@@ -424,7 +425,7 @@ struct cable_diag_status_s {
 	u16 rsvd2;
 };
 
-struct statistics_s {
+struct statistics_a0_s {
 	struct {
 		u32 link_up;
 		u32 link_down;
@@ -457,6 +458,33 @@ struct statistics_s {
 	u32 reserve_fw_gap;
 };
 
+struct __packed statistics_b0_s {
+	u64 rx_good_octets;
+	u64 rx_pause_frames;
+	u64 rx_good_frames;
+	u64 rx_errors;
+	u64 rx_unicast_frames;
+	u64 rx_multicast_frames;
+	u64 rx_broadcast_frames;
+
+	u64 tx_good_octets;
+	u64 tx_pause_frames;
+	u64 tx_good_frames;
+	u64 tx_errors;
+	u64 tx_unicast_frames;
+	u64 tx_multicast_frames;
+	u64 tx_broadcast_frames;
+
+	u32 main_loop_cycles;
+};
+
+struct __packed statistics_s {
+	union __packed {
+		struct statistics_a0_s a0;
+		struct statistics_b0_s b0;
+	};
+};
+
 struct filter_caps_s {
 	u8 l2_filters_base_index:6;
 	u8 flexible_filter_mask:2;
@@ -545,7 +573,7 @@ struct management_status_s {
 	u32 rsvd5;
 };
 
-struct fw_interface_out {
+struct __packed fw_interface_out {
 	struct transaction_counter_s transaction_id;
 	struct version_s version;
 	struct link_status_s link_status;
@@ -569,7 +597,6 @@ struct fw_interface_out {
 	struct core_dump_s core_dump;
 	u32 rsvd11;
 	struct statistics_s stats;
-	u32 rsvd12;
 	struct filter_caps_s filter_caps;
 	struct device_caps_s device_caps;
 	u32 rsvd13;
@@ -592,6 +619,9 @@ struct fw_interface_out {
 #define  AQ_HOST_MODE_LOW_POWER    3U
 #define  AQ_HOST_MODE_SHUTDOWN     4U
 
+#define  AQ_A2_FW_INTERFACE_A0     0
+#define  AQ_A2_FW_INTERFACE_B0     1
+
 int hw_atl2_utils_initfw(struct aq_hw_s *self, const struct aq_fw_ops **fw_ops);
 
 int hw_atl2_utils_soft_reset(struct aq_hw_s *self);
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl2/hw_atl2_utils_fw.c
@@ -333,18 +333,22 @@ static int aq_a2_fw_get_mac_permanent(st
 	return 0;
 }
 
-static int aq_a2_fw_update_stats(struct aq_hw_s *self)
+static void aq_a2_fill_a0_stats(struct aq_hw_s *self,
+				struct statistics_s *stats)
 {
 	struct hw_atl2_priv *priv = (struct hw_atl2_priv *)self->priv;
-	struct statistics_s stats;
-	int err;
-
-	err = hw_atl2_shared_buffer_read_safe(self, stats, &stats);
-	if (err)
-		return err;
-
-#define AQ_SDELTA(_N_, _F_) (self->curr_stats._N_ += \
-			stats.msm._F_ - priv->last_stats.msm._F_)
+	struct aq_stats_s *cs = &self->curr_stats;
+	struct aq_stats_s curr_stats = *cs;
+	bool corrupted_stats = false;
+
+#define AQ_SDELTA(_N, _F)  \
+do { \
+	if (!corrupted_stats && \
+	    ((s64)(stats->a0.msm._F - priv->last_stats.a0.msm._F)) >= 0) \
+		curr_stats._N += stats->a0.msm._F - priv->last_stats.a0.msm._F;\
+	else \
+		corrupted_stats = true; \
+} while (0)
 
 	if (self->aq_link_status.mbps) {
 		AQ_SDELTA(uprc, rx_unicast_frames);
@@ -363,17 +367,76 @@ static int aq_a2_fw_update_stats(struct
 		AQ_SDELTA(mbtc, tx_multicast_octets);
 		AQ_SDELTA(bbrc, rx_broadcast_octets);
 		AQ_SDELTA(bbtc, tx_broadcast_octets);
+
+		if (!corrupted_stats)
+			*cs = curr_stats;
+	}
+#undef AQ_SDELTA
+
+}
+
+static void aq_a2_fill_b0_stats(struct aq_hw_s *self,
+				struct statistics_s *stats)
+{
+	struct hw_atl2_priv *priv = (struct hw_atl2_priv *)self->priv;
+	struct aq_stats_s *cs = &self->curr_stats;
+	struct aq_stats_s curr_stats = *cs;
+	bool corrupted_stats = false;
+
+#define AQ_SDELTA(_N, _F)  \
+do { \
+	if (!corrupted_stats && \
+	    ((s64)(stats->b0._F - priv->last_stats.b0._F)) >= 0) \
+		curr_stats._N += stats->b0._F - priv->last_stats.b0._F; \
+	else \
+		corrupted_stats = true; \
+} while (0)
+
+	if (self->aq_link_status.mbps) {
+		AQ_SDELTA(uprc, rx_unicast_frames);
+		AQ_SDELTA(mprc, rx_multicast_frames);
+		AQ_SDELTA(bprc, rx_broadcast_frames);
+		AQ_SDELTA(erpr, rx_errors);
+		AQ_SDELTA(brc, rx_good_octets);
+
+		AQ_SDELTA(uptc, tx_unicast_frames);
+		AQ_SDELTA(mptc, tx_multicast_frames);
+		AQ_SDELTA(bptc, tx_broadcast_frames);
+		AQ_SDELTA(erpt, tx_errors);
+		AQ_SDELTA(btc, tx_good_octets);
+
+		if (!corrupted_stats)
+			*cs = curr_stats;
 	}
 #undef AQ_SDELTA
-	self->curr_stats.dma_pkt_rc =
-		hw_atl_stats_rx_dma_good_pkt_counter_get(self);
-	self->curr_stats.dma_pkt_tc =
-		hw_atl_stats_tx_dma_good_pkt_counter_get(self);
-	self->curr_stats.dma_oct_rc =
-		hw_atl_stats_rx_dma_good_octet_counter_get(self);
-	self->curr_stats.dma_oct_tc =
-		hw_atl_stats_tx_dma_good_octet_counter_get(self);
-	self->curr_stats.dpc = hw_atl_rpb_rx_dma_drop_pkt_cnt_get(self);
+}
+
+static int aq_a2_fw_update_stats(struct aq_hw_s *self)
+{
+	struct hw_atl2_priv *priv = (struct hw_atl2_priv *)self->priv;
+	struct aq_stats_s *cs = &self->curr_stats;
+	struct statistics_s stats;
+	struct version_s version;
+	int err;
+
+	err = hw_atl2_shared_buffer_read_safe(self, version, &version);
+	if (err)
+		return err;
+
+	err = hw_atl2_shared_buffer_read_safe(self, stats, &stats);
+	if (err)
+		return err;
+
+	if (version.drv_iface_ver == AQ_A2_FW_INTERFACE_A0)
+		aq_a2_fill_a0_stats(self, &stats);
+	else
+		aq_a2_fill_b0_stats(self, &stats);
+
+	cs->dma_pkt_rc = hw_atl_stats_rx_dma_good_pkt_counter_get(self);
+	cs->dma_pkt_tc = hw_atl_stats_tx_dma_good_pkt_counter_get(self);
+	cs->dma_oct_rc = hw_atl_stats_rx_dma_good_octet_counter_get(self);
+	cs->dma_oct_tc = hw_atl_stats_tx_dma_good_octet_counter_get(self);
+	cs->dpc = hw_atl_rpb_rx_dma_drop_pkt_cnt_get(self);
 
 	memcpy(&priv->last_stats, &stats, sizeof(stats));
 

[PATCH 5.10 102/130] atlantic: Remove warn trace message.

[Greg Kroah-Hartman]

From: Sameer Saurabh <ssaurabh@marvell.com>

commit 060a0fb721ec5bbe02ae322e434ec87dc25ed6e9 upstream.

Remove the warn trace message - it's not a correct check here, because
the function can still be called on the device in DOWN state

Fixes: 508f2e3dce454 ("net: atlantic: split rx and tx per-queue stats")
Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/aquantia/atlantic/aq_vec.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/net/ethernet/aquantia/atlantic/aq_vec.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_vec.c
@@ -362,9 +362,6 @@ unsigned int aq_vec_get_sw_stats(struct
 {
 	unsigned int count;
 
-	WARN_ONCE(!aq_vec_is_valid_tc(self, tc),
-		  "Invalid tc %u (#rx=%u, #tx=%u)\n",
-		  tc, self->rx_rings, self->tx_rings);
 	if (!aq_vec_is_valid_tc(self, tc))
 		return 0;
 

[PATCH 5.10 103/130] KVM: x86/pmu: Fix reserved bits for AMD PerfEvtSeln register

[Greg Kroah-Hartman]

From: Like Xu <likexu@tencent.com>

[ Upstream commit cb1d220da0faa5ca0deb93449aff953f0c2cce6d ]

If we run the following perf command in an AMD Milan guest:

  perf stat \
  -e cpu/event=0x1d0/ \
  -e cpu/event=0x1c7/ \
  -e cpu/umask=0x1f,event=0x18e/ \
  -e cpu/umask=0x7,event=0x18e/ \
  -e cpu/umask=0x18,event=0x18e/ \
  ./workload

dmesg will report a #GP warning from an unchecked MSR access
error on MSR_F15H_PERF_CTLx.

This is because according to APM (Revision: 4.03) Figure 13-7,
the bits [35:32] of AMD PerfEvtSeln register is a part of the
event select encoding, which extends the EVENT_SELECT field
from 8 bits to 12 bits.

Opportunistically update pmu->reserved_bits for reserved bit 19.

Reported-by: Jim Mattson <jmattson@google.com>
Fixes: ca724305a2b0 ("KVM: x86/vPMU: Implement AMD vPMU code for KVM")
Signed-off-by: Like Xu <likexu@tencent.com>
Message-Id: <20211118130320.95997-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/svm/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/svm/pmu.c b/arch/x86/kvm/svm/pmu.c
index 035da07500e8b..5a5c165a30ed1 100644
--- a/arch/x86/kvm/svm/pmu.c
+++ b/arch/x86/kvm/svm/pmu.c
@@ -274,7 +274,7 @@ static void amd_pmu_refresh(struct kvm_vcpu *vcpu)
 		pmu->nr_arch_gp_counters = AMD64_NUM_COUNTERS;
 
 	pmu->counter_bitmask[KVM_PMC_GP] = ((u64)1 << 48) - 1;
-	pmu->reserved_bits = 0xffffffff00200000ull;
+	pmu->reserved_bits = 0xfffffff000280000ull;
 	pmu->version = 1;
 	/* not applicable to AMD; but clean them to prevent any fall out */
 	pmu->counter_bitmask[KVM_PMC_FIXED] = 0;
-- 
2.33.0

[PATCH 5.10 104/130] KVM: VMX: Set failure code in prepare_vmcs02()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit bfbb307c628676929c2d329da0daf9d22afa8ad2 ]

The error paths in the prepare_vmcs02() function are supposed to set
*entry_failure_code but this path does not.  It leads to using an
uninitialized variable in the caller.

Fixes: 71f7347025bf ("KVM: nVMX: Load GUEST_IA32_PERF_GLOBAL_CTRL MSR on VM-Entry")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Message-Id: <20211130125337.GB24578@kili>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx/nested.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 257ec2cbf69a4..36661b15c3d04 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2619,8 +2619,10 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 
 	if ((vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL) &&
 	    WARN_ON_ONCE(kvm_set_msr(vcpu, MSR_CORE_PERF_GLOBAL_CTRL,
-				     vmcs12->guest_ia32_perf_global_ctrl)))
+				     vmcs12->guest_ia32_perf_global_ctrl))) {
+		*entry_failure_code = ENTRY_FAIL_DEFAULT;
 		return -EINVAL;
+	}
 
 	kvm_rsp_write(vcpu, vmcs12->guest_rsp);
 	kvm_rip_write(vcpu, vmcs12->guest_rip);
-- 
2.33.0

[PATCH 5.10 105/130] x86/sev: Fix SEV-ES INS/OUTS instructions for word, dword, and qword

[Greg Kroah-Hartman]

From: Michael Sterritt <sterritt@google.com>

[ Upstream commit 1d5379d0475419085d3575bd9155f2e558e96390 ]

Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.

This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.

Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.

Fixes: f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/sev-es.c | 57 +++++++++++++++++++++++++++-------------
 1 file changed, 39 insertions(+), 18 deletions(-)

diff --git a/arch/x86/kernel/sev-es.c b/arch/x86/kernel/sev-es.c
index 865e234ea24bd..c222fab112cbd 100644
--- a/arch/x86/kernel/sev-es.c
+++ b/arch/x86/kernel/sev-es.c
@@ -260,11 +260,6 @@ static enum es_result vc_write_mem(struct es_em_ctxt *ctxt,
 				   char *dst, char *buf, size_t size)
 {
 	unsigned long error_code = X86_PF_PROT | X86_PF_WRITE;
-	char __user *target = (char __user *)dst;
-	u64 d8;
-	u32 d4;
-	u16 d2;
-	u8  d1;
 
 	/*
 	 * This function uses __put_user() independent of whether kernel or user
@@ -286,26 +281,42 @@ static enum es_result vc_write_mem(struct es_em_ctxt *ctxt,
 	 * instructions here would cause infinite nesting.
 	 */
 	switch (size) {
-	case 1:
+	case 1: {
+		u8 d1;
+		u8 __user *target = (u8 __user *)dst;
+
 		memcpy(&d1, buf, 1);
 		if (__put_user(d1, target))
 			goto fault;
 		break;
-	case 2:
+	}
+	case 2: {
+		u16 d2;
+		u16 __user *target = (u16 __user *)dst;
+
 		memcpy(&d2, buf, 2);
 		if (__put_user(d2, target))
 			goto fault;
 		break;
-	case 4:
+	}
+	case 4: {
+		u32 d4;
+		u32 __user *target = (u32 __user *)dst;
+
 		memcpy(&d4, buf, 4);
 		if (__put_user(d4, target))
 			goto fault;
 		break;
-	case 8:
+	}
+	case 8: {
+		u64 d8;
+		u64 __user *target = (u64 __user *)dst;
+
 		memcpy(&d8, buf, 8);
 		if (__put_user(d8, target))
 			goto fault;
 		break;
+	}
 	default:
 		WARN_ONCE(1, "%s: Invalid size: %zu\n", __func__, size);
 		return ES_UNSUPPORTED;
@@ -328,11 +339,6 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
 				  char *src, char *buf, size_t size)
 {
 	unsigned long error_code = X86_PF_PROT;
-	char __user *s = (char __user *)src;
-	u64 d8;
-	u32 d4;
-	u16 d2;
-	u8  d1;
 
 	/*
 	 * This function uses __get_user() independent of whether kernel or user
@@ -354,26 +360,41 @@ static enum es_result vc_read_mem(struct es_em_ctxt *ctxt,
 	 * instructions here would cause infinite nesting.
 	 */
 	switch (size) {
-	case 1:
+	case 1: {
+		u8 d1;
+		u8 __user *s = (u8 __user *)src;
+
 		if (__get_user(d1, s))
 			goto fault;
 		memcpy(buf, &d1, 1);
 		break;
-	case 2:
+	}
+	case 2: {
+		u16 d2;
+		u16 __user *s = (u16 __user *)src;
+
 		if (__get_user(d2, s))
 			goto fault;
 		memcpy(buf, &d2, 2);
 		break;
-	case 4:
+	}
+	case 4: {
+		u32 d4;
+		u32 __user *s = (u32 __user *)src;
+
 		if (__get_user(d4, s))
 			goto fault;
 		memcpy(buf, &d4, 4);
 		break;
-	case 8:
+	}
+	case 8: {
+		u64 d8;
+		u64 __user *s = (u64 __user *)src;
 		if (__get_user(d8, s))
 			goto fault;
 		memcpy(buf, &d8, 8);
 		break;
+	}
 	default:
 		WARN_ONCE(1, "%s: Invalid size: %zu\n", __func__, size);
 		return ES_UNSUPPORTED;
-- 
2.33.0

[PATCH 5.10 106/130] x86/entry: Use the correct fence macro after swapgs in kernel CR3

[Greg Kroah-Hartman]

From: Lai Jiangshan <laijs@linux.alibaba.com>

[ Upstream commit 1367afaa2ee90d1c956dfc224e199fcb3ff3f8cc ]

The commit

  c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")

removed a CR3 write in the faulting path of load_gs_index().

But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().

Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.

 [ bp: Massage commit message and comment. ]

Fixes: c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/entry_64.S | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f18f3932e971a..a806d68b96990 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1035,11 +1035,6 @@ SYM_CODE_START_LOCAL(error_entry)
 	pushq	%r12
 	ret
 
-.Lerror_entry_done_lfence:
-	FENCE_SWAPGS_KERNEL_ENTRY
-.Lerror_entry_done:
-	ret
-
 	/*
 	 * There are two places in the kernel that can potentially fault with
 	 * usergs. Handle them here.  B stepping K8s sometimes report a
@@ -1062,8 +1057,14 @@ SYM_CODE_START_LOCAL(error_entry)
 	 * .Lgs_change's error handler with kernel gsbase.
 	 */
 	SWAPGS
-	FENCE_SWAPGS_USER_ENTRY
-	jmp .Lerror_entry_done
+
+	/*
+	 * Issue an LFENCE to prevent GS speculation, regardless of whether it is a
+	 * kernel or user gsbase.
+	 */
+.Lerror_entry_done_lfence:
+	FENCE_SWAPGS_KERNEL_ENTRY
+	ret
 
 .Lbstep_iret:
 	/* Fix truncated RIP */
-- 
2.33.0

[PATCH 5.10 107/130] x86/xen: Add xenpv_restore_regs_and_return_to_usermode()

[Greg Kroah-Hartman]

From: Lai Jiangshan <laijs@linux.alibaba.com>

[ Upstream commit 5c8f6a2e316efebb3ba93d8c1af258155dcf5632 ]

In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.

In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.

This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.

And, with  XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.

 [ bp: Massage commit message. ]

Fixes: 7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/entry_64.S |  4 ++++
 arch/x86/xen/xen-asm.S    | 20 ++++++++++++++++++++
 2 files changed, 24 insertions(+)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index a806d68b96990..de541ea2788eb 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -575,6 +575,10 @@ SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
 	ud2
 1:
 #endif
+#ifdef CONFIG_XEN_PV
+	ALTERNATIVE "", "jmp xenpv_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
+#endif
+
 	POP_REGS pop_rdi=0
 
 	/*
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 53cf8aa35032d..011ec649f3886 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -19,6 +19,7 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <../entry/calling.h>
 
 /*
  * Enable events.  This clears the event mask and tests the pending
@@ -235,6 +236,25 @@ SYM_CODE_START(xen_sysret64)
 	jmp hypercall_iret
 SYM_CODE_END(xen_sysret64)
 
+/*
+ * XEN pv doesn't use trampoline stack, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is
+ * also the kernel stack.  Reusing swapgs_restore_regs_and_return_to_usermode()
+ * in XEN pv would cause %rsp to move up to the top of the kernel stack and
+ * leave the IRET frame below %rsp, which is dangerous to be corrupted if #NMI
+ * interrupts. And swapgs_restore_regs_and_return_to_usermode() pushing the IRET
+ * frame at the same address is useless.
+ */
+SYM_CODE_START(xenpv_restore_regs_and_return_to_usermode)
+	UNWIND_HINT_REGS
+	POP_REGS
+
+	/* stackleak_erase() can work safely on the kernel stack. */
+	STACKLEAK_ERASE_NOCLOBBER
+
+	addq	$8, %rsp	/* skip regs->orig_ax */
+	jmp xen_iret
+SYM_CODE_END(xenpv_restore_regs_and_return_to_usermode)
+
 /*
  * Xen handles syscall callbacks much like ordinary exceptions, which
  * means we have:
-- 
2.33.0

[PATCH 5.10 108/130] sched/uclamp: Fix rq->uclamp_max not set on first enqueue

[Greg Kroah-Hartman]

From: Qais Yousef <qais.yousef@arm.com>

[ Upstream commit 315c4f884800c45cb6bd8c90422fad554a8b9588 ]

Commit d81ae8aac85c ("sched/uclamp: Fix initialization of struct
uclamp_rq") introduced a bug where uclamp_max of the rq is not reset to
match the woken up task's uclamp_max when the rq is idle.

The code was relying on rq->uclamp_max initialized to zero, so on first
enqueue

	static inline void uclamp_rq_inc_id(struct rq *rq, struct task_struct *p,
					    enum uclamp_id clamp_id)
	{
		...

		if (uc_se->value > READ_ONCE(uc_rq->value))
			WRITE_ONCE(uc_rq->value, uc_se->value);
	}

was actually resetting it. But since commit d81ae8aac85c changed the
default to 1024, this no longer works. And since rq->uclamp_flags is
also initialized to 0, neither above code path nor uclamp_idle_reset()
update the rq->uclamp_max on first wake up from idle.

This is only visible from first wake up(s) until the first dequeue to
idle after enabling the static key. And it only matters if the
uclamp_max of this task is < 1024 since only then its uclamp_max will be
effectively ignored.

Fix it by properly initializing rq->uclamp_flags = UCLAMP_FLAG_IDLE to
ensure uclamp_idle_reset() is called which then will update the rq
uclamp_max value as expected.

Fixes: d81ae8aac85c ("sched/uclamp: Fix initialization of struct uclamp_rq")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <Valentin.Schneider@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20211202112033.1705279-1-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 304aad997da11..0a5f9fad45e4b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1526,7 +1526,7 @@ static void __init init_uclamp_rq(struct rq *rq)
 		};
 	}
 
-	rq->uclamp_flags = 0;
+	rq->uclamp_flags = UCLAMP_FLAG_IDLE;
 }
 
 static void __init init_uclamp(void)
-- 
2.33.0

[PATCH 5.10 109/130] x86/pv: Switch SWAPGS to ALTERNATIVE

[Greg Kroah-Hartman]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 53c9d9240944088274aadbbbafc6138ca462db4f ]

SWAPGS is used only for interrupts coming from user mode or for
returning to user mode. So there is no reason to use the PARAVIRT
framework, as it can easily be replaced by an ALTERNATIVE depending
on X86_FEATURE_XENPV.

There are several instances using the PV-aware SWAPGS macro in paths
which are never executed in a Xen PV guest. Replace those with the
plain swapgs instruction. For SWAPGS_UNSAFE_STACK the same applies.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210120135555.32594-5-jgross@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/entry_64.S             | 10 +++++-----
 arch/x86/include/asm/irqflags.h       | 20 ++++++++------------
 arch/x86/include/asm/paravirt.h       | 20 --------------------
 arch/x86/include/asm/paravirt_types.h |  2 --
 arch/x86/kernel/asm-offsets_64.c      |  1 -
 arch/x86/kernel/paravirt.c            |  1 -
 arch/x86/kernel/paravirt_patch.c      |  3 ---
 arch/x86/xen/enlighten_pv.c           |  3 ---
 8 files changed, 13 insertions(+), 47 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index de541ea2788eb..166554a109aeb 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -673,7 +673,7 @@ native_irq_return_ldt:
 	 */
 
 	pushq	%rdi				/* Stash user RDI */
-	SWAPGS					/* to kernel GS */
+	swapgs					/* to kernel GS */
 	SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi	/* to kernel CR3 */
 
 	movq	PER_CPU_VAR(espfix_waddr), %rdi
@@ -703,7 +703,7 @@ native_irq_return_ldt:
 	orq	PER_CPU_VAR(espfix_stack), %rax
 
 	SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
-	SWAPGS					/* to user GS */
+	swapgs					/* to user GS */
 	popq	%rdi				/* Restore user RDI */
 
 	movq	%rax, %rsp
@@ -947,7 +947,7 @@ SYM_CODE_START_LOCAL(paranoid_entry)
 	ret
 
 .Lparanoid_entry_swapgs:
-	SWAPGS
+	swapgs
 
 	/*
 	 * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an
@@ -1005,7 +1005,7 @@ SYM_CODE_START_LOCAL(paranoid_exit)
 	jnz		restore_regs_and_return_to_kernel
 
 	/* We are returning to a context with user GSBASE */
-	SWAPGS_UNSAFE_STACK
+	swapgs
 	jmp		restore_regs_and_return_to_kernel
 SYM_CODE_END(paranoid_exit)
 
@@ -1431,7 +1431,7 @@ nmi_no_fsgsbase:
 	jnz	nmi_restore
 
 nmi_swapgs:
-	SWAPGS_UNSAFE_STACK
+	swapgs
 
 nmi_restore:
 	POP_REGS
diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index 2dfc8d380dab1..8c86edefa1150 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -131,18 +131,6 @@ static __always_inline unsigned long arch_local_irq_save(void)
 #define SAVE_FLAGS(x)		pushfq; popq %rax
 #endif
 
-#define SWAPGS	swapgs
-/*
- * Currently paravirt can't handle swapgs nicely when we
- * don't have a stack we can rely on (such as a user space
- * stack).  So we either find a way around these or just fault
- * and emulate if a guest tries to call swapgs directly.
- *
- * Either way, this is a good way to document that we don't
- * have a reliable stack. x86_64 only.
- */
-#define SWAPGS_UNSAFE_STACK	swapgs
-
 #define INTERRUPT_RETURN	jmp native_iret
 #define USERGS_SYSRET64				\
 	swapgs;					\
@@ -170,6 +158,14 @@ static __always_inline int arch_irqs_disabled(void)
 
 	return arch_irqs_disabled_flags(flags);
 }
+#else
+#ifdef CONFIG_X86_64
+#ifdef CONFIG_XEN_PV
+#define SWAPGS	ALTERNATIVE "swapgs", "", X86_FEATURE_XENPV
+#else
+#define SWAPGS	swapgs
+#endif
+#endif
 #endif /* !__ASSEMBLY__ */
 
 #endif
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index d25cc6830e895..5647bcdba776e 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -776,26 +776,6 @@ extern void default_banner(void);
 
 #ifdef CONFIG_X86_64
 #ifdef CONFIG_PARAVIRT_XXL
-/*
- * If swapgs is used while the userspace stack is still current,
- * there's no way to call a pvop.  The PV replacement *must* be
- * inlined, or the swapgs instruction must be trapped and emulated.
- */
-#define SWAPGS_UNSAFE_STACK						\
-	PARA_SITE(PARA_PATCH(PV_CPU_swapgs), swapgs)
-
-/*
- * Note: swapgs is very special, and in practise is either going to be
- * implemented with a single "swapgs" instruction or something very
- * special.  Either way, we don't need to save any registers for
- * it.
- */
-#define SWAPGS								\
-	PARA_SITE(PARA_PATCH(PV_CPU_swapgs),				\
-		  ANNOTATE_RETPOLINE_SAFE;				\
-		  call PARA_INDIRECT(pv_ops+PV_CPU_swapgs);		\
-		 )
-
 #define USERGS_SYSRET64							\
 	PARA_SITE(PARA_PATCH(PV_CPU_usergs_sysret64),			\
 		  ANNOTATE_RETPOLINE_SAFE;				\
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 0fad9f61c76ab..903d71884fa25 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -169,8 +169,6 @@ struct pv_cpu_ops {
 	   frame set up. */
 	void (*iret)(void);
 
-	void (*swapgs)(void);
-
 	void (*start_context_switch)(struct task_struct *prev);
 	void (*end_context_switch)(struct task_struct *next);
 #endif
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 828be792231e9..1354bc30614d7 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -15,7 +15,6 @@ int main(void)
 #ifdef CONFIG_PARAVIRT_XXL
 	OFFSET(PV_CPU_usergs_sysret64, paravirt_patch_template,
 	       cpu.usergs_sysret64);
-	OFFSET(PV_CPU_swapgs, paravirt_patch_template, cpu.swapgs);
 #ifdef CONFIG_DEBUG_ENTRY
 	OFFSET(PV_IRQ_save_fl, paravirt_patch_template, irq.save_fl);
 #endif
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 6c3407ba6ee98..5e5fcf5c376de 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -312,7 +312,6 @@ struct paravirt_patch_template pv_ops = {
 
 	.cpu.usergs_sysret64	= native_usergs_sysret64,
 	.cpu.iret		= native_iret,
-	.cpu.swapgs		= native_swapgs,
 
 #ifdef CONFIG_X86_IOPL_IOPERM
 	.cpu.invalidate_io_bitmap	= native_tss_invalidate_io_bitmap,
diff --git a/arch/x86/kernel/paravirt_patch.c b/arch/x86/kernel/paravirt_patch.c
index ace6e334cb393..7c518b08aa3c5 100644
--- a/arch/x86/kernel/paravirt_patch.c
+++ b/arch/x86/kernel/paravirt_patch.c
@@ -28,7 +28,6 @@ struct patch_xxl {
 	const unsigned char	irq_restore_fl[2];
 	const unsigned char	cpu_wbinvd[2];
 	const unsigned char	cpu_usergs_sysret64[6];
-	const unsigned char	cpu_swapgs[3];
 	const unsigned char	mov64[3];
 };
 
@@ -43,7 +42,6 @@ static const struct patch_xxl patch_data_xxl = {
 	.cpu_wbinvd		= { 0x0f, 0x09 },	// wbinvd
 	.cpu_usergs_sysret64	= { 0x0f, 0x01, 0xf8,
 				    0x48, 0x0f, 0x07 },	// swapgs; sysretq
-	.cpu_swapgs		= { 0x0f, 0x01, 0xf8 },	// swapgs
 	.mov64			= { 0x48, 0x89, 0xf8 },	// mov %rdi, %rax
 };
 
@@ -86,7 +84,6 @@ unsigned int native_patch(u8 type, void *insn_buff, unsigned long addr,
 	PATCH_CASE(mmu, write_cr3, xxl, insn_buff, len);
 
 	PATCH_CASE(cpu, usergs_sysret64, xxl, insn_buff, len);
-	PATCH_CASE(cpu, swapgs, xxl, insn_buff, len);
 	PATCH_CASE(cpu, wbinvd, xxl, insn_buff, len);
 #endif
 
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 5af0421ef74ba..16ff25d6935e7 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1083,9 +1083,6 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 #endif
 	.io_delay = xen_io_delay,
 
-	/* Xen takes care of %gs when switching to usermode for us */
-	.swapgs = paravirt_nop,
-
 	.start_context_switch = paravirt_start_context_switch,
 	.end_context_switch = xen_end_context_switch,
 };
-- 
2.33.0

[PATCH 5.10 110/130] x86/entry: Add a fence for kernel entry SWAPGS in paranoid_entry()

[Greg Kroah-Hartman]

From: Lai Jiangshan <laijs@linux.alibaba.com>

[ Upstream commit c07e45553da1808aa802e9f0ffa8108cfeaf7a17 ]

Commit

  18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")

added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.

But

  96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")

changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.

Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.

  [ bp: Massage, fix typos, remove obsolete comment while at it. ]

Fixes: 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/entry/entry_64.S | 16 +++++-----------
 1 file changed, 5 insertions(+), 11 deletions(-)

diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index 166554a109aeb..a24ce5905ab82 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -936,6 +936,7 @@ SYM_CODE_START_LOCAL(paranoid_entry)
 .Lparanoid_entry_checkgs:
 	/* EBX = 1 -> kernel GSBASE active, no restore required */
 	movl	$1, %ebx
+
 	/*
 	 * The kernel-enforced convention is a negative GSBASE indicates
 	 * a kernel value. No SWAPGS needed on entry and exit.
@@ -943,21 +944,14 @@ SYM_CODE_START_LOCAL(paranoid_entry)
 	movl	$MSR_GS_BASE, %ecx
 	rdmsr
 	testl	%edx, %edx
-	jns	.Lparanoid_entry_swapgs
-	ret
+	js	.Lparanoid_kernel_gsbase
 
-.Lparanoid_entry_swapgs:
+	/* EBX = 0 -> SWAPGS required on exit */
+	xorl	%ebx, %ebx
 	swapgs
+.Lparanoid_kernel_gsbase:
 
-	/*
-	 * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an
-	 * unconditional CR3 write, even in the PTI case.  So do an lfence
-	 * to prevent GS speculation, regardless of whether PTI is enabled.
-	 */
 	FENCE_SWAPGS_KERNEL_ENTRY
-
-	/* EBX = 0 -> SWAPGS required on exit */
-	xorl	%ebx, %ebx
 	ret
 SYM_CODE_END(paranoid_entry)
 
-- 
2.33.0

[PATCH 5.10 111/130] parisc: Fix KBUILD_IMAGE for self-extracting kernel

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 1d7c29b77725d05faff6754d2f5e7c147aedcf93 upstream.

Default KBUILD_IMAGE to $(boot)/bzImage if a self-extracting
(CONFIG_PARISC_SELF_EXTRACT=y) kernel is to be built.
This fixes the bindeb-pkg make target.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/Makefile |    5 +++++
 1 file changed, 5 insertions(+)

--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -17,7 +17,12 @@
 # Mike Shaver, Helge Deller and Martin K. Petersen
 #
 
+ifdef CONFIG_PARISC_SELF_EXTRACT
+boot := arch/parisc/boot
+KBUILD_IMAGE := $(boot)/bzImage
+else
 KBUILD_IMAGE := vmlinuz
+endif
 
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1

[PATCH 5.10 112/130] parisc: Fix "make install" on newer debian releases

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit 0f9fee4cdebfbe695c297e5b603a275e2557c1cc upstream.

On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/install.sh |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/parisc/install.sh
+++ b/arch/parisc/install.sh
@@ -39,6 +39,7 @@ verify "$3"
 if [ -n "${INSTALLKERNEL}" ]; then
   if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
   if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+  if [ -x /usr/sbin/${INSTALLKERNEL} ]; then exec /usr/sbin/${INSTALLKERNEL} "$@"; fi
 fi
 
 # Default install

[PATCH 5.10 113/130] vgacon: Propagate console boot parameters before calling `vc_resize

[Greg Kroah-Hartman]

From: Maciej W. Rozycki <macro@orcam.me.uk>

commit 3dfac26e2ef29ff2abc2a75aa4cd48fce25a2c4b upstream.

Fix a division by zero in `vgacon_resize' with a backtrace like:

vgacon_resize
vc_do_resize
vgacon_init
do_bind_con_driver
do_unbind_con_driver
fbcon_fb_unbind
do_unregister_framebuffer
do_register_framebuffer
register_framebuffer
__drm_fb_helper_initial_config_and_unlock
drm_helper_hpd_irq_event
dw_hdmi_irq
irq_thread
kthread

caused by `c->vc_cell_height' not having been initialized.  This has
only started to trigger with commit 860dafa90259 ("vt: Fix character
height handling with VT_RESIZEX"), however the ultimate offender is
commit 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow
retaking of the console").

Said commit has added a call to `vc_resize' whenever `vgacon_init' is
called with the `init' argument set to 0, which did not happen before.
And the call is made before a key vgacon boot parameter retrieved in
`vgacon_startup' has been propagated in `vgacon_init' for `vc_resize' to
use to the console structure being worked on.  Previously the parameter
was `c->vc_font.height' and now it is `c->vc_cell_height'.

In this particular scenario the registration of fbcon has failed and vt
resorts to vgacon.  Now fbcon does have initialized `c->vc_font.height'
somehow, unlike `c->vc_cell_height', which is why this code did not
crash before, but either way the boot parameters should have been copied
to the console structure ahead of the call to `vc_resize' rather than
afterwards, so that first the call has a chance to use them and second
they do not change the console structure to something possibly different
from what was used by `vc_resize'.

Move the propagation of the vgacon boot parameters ahead of the call to
`vc_resize' then.  Adjust the comment accordingly.

Fixes: 50ec42edd978 ("[PATCH] Detaching fbcon: fix vgacon to allow retaking of the console")
Cc: stable@vger.kernel.org # v2.6.18+
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Reported-by: Pavel V. Panteleev <panteleev_p@mcst.ru>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2110252317110.58149@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/video/console/vgacon.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -370,11 +370,17 @@ static void vgacon_init(struct vc_data *
 	struct uni_pagedir *p;
 
 	/*
-	 * We cannot be loaded as a module, therefore init is always 1,
-	 * but vgacon_init can be called more than once, and init will
-	 * not be 1.
+	 * We cannot be loaded as a module, therefore init will be 1
+	 * if we are the default console, however if we are a fallback
+	 * console, for example if fbcon has failed registration, then
+	 * init will be 0, so we need to make sure our boot parameters
+	 * have been copied to the console structure for vgacon_resize
+	 * ultimately called by vc_resize.  Any subsequent calls to
+	 * vgacon_init init will have init set to 0 too.
 	 */
 	c->vc_can_do_color = vga_can_do_color;
+	c->vc_scan_lines = vga_scan_lines;
+	c->vc_font.height = c->vc_cell_height = vga_video_font_height;
 
 	/* set dimensions manually if init != 0 since vc_resize() will fail */
 	if (init) {
@@ -383,8 +389,6 @@ static void vgacon_init(struct vc_data *
 	} else
 		vc_resize(c, vga_video_num_columns, vga_video_num_lines);
 
-	c->vc_scan_lines = vga_scan_lines;
-	c->vc_font.height = c->vc_cell_height = vga_video_font_height;
 	c->vc_complement_mask = 0x7700;
 	if (vga_512_chars)
 		c->vc_hi_font_mask = 0x0800;

[PATCH 5.10 114/130] xhci: Fix commad ring abort, write all 64 bits to CRCR register.

[Greg Kroah-Hartman]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 09f736aa95476631227d2dc0e6b9aeee1ad7ed58 upstream.

Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.

The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.

Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.

The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.

Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci-ring.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -342,7 +342,9 @@ static void xhci_handle_stopped_cmd_ring
 /* Must be called with xhci->lock held, releases and aquires lock back */
 static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
 {
-	u32 temp_32;
+	struct xhci_segment *new_seg	= xhci->cmd_ring->deq_seg;
+	union xhci_trb *new_deq		= xhci->cmd_ring->dequeue;
+	u64 crcr;
 	int ret;
 
 	xhci_dbg(xhci, "Abort command ring\n");
@@ -351,13 +353,18 @@ static int xhci_abort_cmd_ring(struct xh
 
 	/*
 	 * The control bits like command stop, abort are located in lower
-	 * dword of the command ring control register. Limit the write
-	 * to the lower dword to avoid corrupting the command ring pointer
-	 * in case if the command ring is stopped by the time upper dword
-	 * is written.
+	 * dword of the command ring control register.
+	 * Some controllers require all 64 bits to be written to abort the ring.
+	 * Make sure the upper dword is valid, pointing to the next command,
+	 * avoiding corrupting the command ring pointer in case the command ring
+	 * is stopped by the time the upper dword is written.
 	 */
-	temp_32 = readl(&xhci->op_regs->cmd_ring);
-	writel(temp_32 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+	next_trb(xhci, NULL, &new_seg, &new_deq);
+	if (trb_is_link(new_deq))
+		next_trb(xhci, NULL, &new_seg, &new_deq);
+
+	crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
+	xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
 
 	/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
 	 * completion of the Command Abort operation. If CRR is not negated in 5

[PATCH 5.10 115/130] USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub

[Greg Kroah-Hartman]

From: Ole Ernst <olebowle@gmx.com>

commit d2a004037c3c6afd36d40c384d2905f47cd51c57 upstream.

This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71

Disable LPM to resolve the issue.

Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -435,6 +435,9 @@ static const struct usb_device_id usb_qu
 	{ USB_DEVICE(0x1532, 0x0116), .driver_info =
 			USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
 
+	/* Lenovo Powered USB-C Travel Hub (4X90S92381, RTL8153 GigE) */
+	{ USB_DEVICE(0x17ef, 0x721e), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Lenovo ThinkCenter A630Z TI024Gen3 usb-audio */
 	{ USB_DEVICE(0x17ef, 0xa012), .driver_info =
 			USB_QUIRK_DISCONNECT_SUSPEND },

[PATCH 5.10 116/130] usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect

[Greg Kroah-Hartman]

From: Badhri Jagan Sridharan <badhri@google.com>

commit fbcd13df1e78eb2ba83a3c160eefe2d6f574beaf upstream.

Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."

This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.

[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]

Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/typec/tcpm/tcpm.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -3293,11 +3293,7 @@ static void run_state_machine(struct tcp
 				       tcpm_try_src(port) ? SRC_TRY
 							  : SNK_ATTACHED,
 				       0);
-		else
-			/* Wait for VBUS, but not forever */
-			tcpm_set_state(port, PORT_RESET, PD_T_PS_SOURCE_ON);
 		break;
-
 	case SRC_TRY:
 		port->try_src_count++;
 		tcpm_set_cc(port, tcpm_rp_cc(port));

[PATCH 5.10 117/130] x86/tsc: Add a timer to make sure TSC_adjust is always checked

[Greg Kroah-Hartman]

From: Feng Tang <feng.tang@intel.com>

commit c7719e79347803b8e3b6b50da8c6db410a3012b5 upstream.

The TSC_ADJUST register is checked every time a CPU enters idle state, but
Thomas Gleixner mentioned there is still a caveat that a system won't enter
idle [1], either because it's too busy or configured purposely to not enter
idle.

Setup a periodic timer (every 10 minutes) to make sure the check is
happening on a regular base.

[1] https://lore.kernel.org/lkml/875z286xtk.fsf@nanos.tec.linutronix.de/

Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability")
Requested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211117023751.24190-1-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/tsc_sync.c |   41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -30,6 +30,7 @@ struct tsc_adjust {
 };
 
 static DEFINE_PER_CPU(struct tsc_adjust, tsc_adjust);
+static struct timer_list tsc_sync_check_timer;
 
 /*
  * TSC's on different sockets may be reset asynchronously.
@@ -77,6 +78,46 @@ void tsc_verify_tsc_adjust(bool resume)
 	}
 }
 
+/*
+ * Normally the tsc_sync will be checked every time system enters idle
+ * state, but there is still caveat that a system won't enter idle,
+ * either because it's too busy or configured purposely to not enter
+ * idle.
+ *
+ * So setup a periodic timer (every 10 minutes) to make sure the check
+ * is always on.
+ */
+
+#define SYNC_CHECK_INTERVAL		(HZ * 600)
+
+static void tsc_sync_check_timer_fn(struct timer_list *unused)
+{
+	int next_cpu;
+
+	tsc_verify_tsc_adjust(false);
+
+	/* Run the check for all onlined CPUs in turn */
+	next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
+	if (next_cpu >= nr_cpu_ids)
+		next_cpu = cpumask_first(cpu_online_mask);
+
+	tsc_sync_check_timer.expires += SYNC_CHECK_INTERVAL;
+	add_timer_on(&tsc_sync_check_timer, next_cpu);
+}
+
+static int __init start_sync_check_timer(void)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_TSC_ADJUST) || tsc_clocksource_reliable)
+		return 0;
+
+	timer_setup(&tsc_sync_check_timer, tsc_sync_check_timer_fn, 0);
+	tsc_sync_check_timer.expires = jiffies + SYNC_CHECK_INTERVAL;
+	add_timer(&tsc_sync_check_timer);
+
+	return 0;
+}
+late_initcall(start_sync_check_timer);
+
 static void tsc_sanitize_first_cpu(struct tsc_adjust *cur, s64 bootval,
 				   unsigned int cpu, bool bootcpu)
 {

[PATCH 5.10 118/130] x86/tsc: Disable clocksource watchdog for TSC on qualified platorms

[Greg Kroah-Hartman]

From: Feng Tang <feng.tang@intel.com>

commit b50db7095fe002fa3e16605546cba66bf1b68a3e upstream.

There are cases that the TSC clocksource is wrongly judged as unstable by
the clocksource watchdog mechanism which tries to validate the TSC against
HPET, PM_TIMER or jiffies. While there is hardly a general reliable way to
check the validity of a watchdog, Thomas Gleixner proposed [1]:

"I'm inclined to lift that requirement when the CPU has:

    1) X86_FEATURE_CONSTANT_TSC
    2) X86_FEATURE_NONSTOP_TSC
    3) X86_FEATURE_NONSTOP_TSC_S3
    4) X86_FEATURE_TSC_ADJUST
    5) At max. 4 sockets

 After two decades of horrors we're finally at a point where TSC seems
 to be halfway reliable and less abused by BIOS tinkerers. TSC_ADJUST
 was really key as we can now detect even small modifications reliably
 and the important point is that we can cure them as well (not pretty
 but better than all other options)."

As feature #3 X86_FEATURE_NONSTOP_TSC_S3 only exists on several generations
of Atom processorz, and is always coupled with X86_FEATURE_CONSTANT_TSC
and X86_FEATURE_NONSTOP_TSC, skip checking it, and also be more defensive
to use maximal 2 sockets.

The check is done inside tsc_init() before registering 'tsc-early' and
'tsc' clocksources, as there were cases that both of them had been
wrongly judged as unreliable.

For more background of tsc/watchdog, there is a good summary in [2]

[tglx} Update vs. jiffies:

  On systems where the only remaining clocksource aside of TSC is jiffies
  there is no way to make this work because that creates a circular
  dependency. Jiffies accuracy depends on not missing a periodic timer
  interrupt, which is not guaranteed. That could be detected by TSC, but as
  TSC is not trusted this cannot be compensated. The consequence is a
  circulus vitiosus which results in shutting down TSC and falling back to
  the jiffies clocksource which is even more unreliable.

[1]. https://lore.kernel.org/lkml/87eekfk8bd.fsf@nanos.tec.linutronix.de/
[2]. https://lore.kernel.org/lkml/87a6pimt1f.ffs@nanos.tec.linutronix.de/

[ tglx: Refine comment and amend changelog ]

Fixes: 6e3cd95234dc ("x86/hpet: Use another crystalball to evaluate HPET usability")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211117023751.24190-2-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kernel/tsc.c |   28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -1178,6 +1178,12 @@ void mark_tsc_unstable(char *reason)
 
 EXPORT_SYMBOL_GPL(mark_tsc_unstable);
 
+static void __init tsc_disable_clocksource_watchdog(void)
+{
+	clocksource_tsc_early.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+	clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+}
+
 static void __init check_system_tsc_reliable(void)
 {
 #if defined(CONFIG_MGEODEGX1) || defined(CONFIG_MGEODE_LX) || defined(CONFIG_X86_GENERIC)
@@ -1194,6 +1200,23 @@ static void __init check_system_tsc_reli
 #endif
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE))
 		tsc_clocksource_reliable = 1;
+
+	/*
+	 * Disable the clocksource watchdog when the system has:
+	 *  - TSC running at constant frequency
+	 *  - TSC which does not stop in C-States
+	 *  - the TSC_ADJUST register which allows to detect even minimal
+	 *    modifications
+	 *  - not more than two sockets. As the number of sockets cannot be
+	 *    evaluated at the early boot stage where this has to be
+	 *    invoked, check the number of online memory nodes as a
+	 *    fallback solution which is an reasonable estimate.
+	 */
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) &&
+	    boot_cpu_has(X86_FEATURE_NONSTOP_TSC) &&
+	    boot_cpu_has(X86_FEATURE_TSC_ADJUST) &&
+	    nr_online_nodes <= 2)
+		tsc_disable_clocksource_watchdog();
 }
 
 /*
@@ -1385,9 +1408,6 @@ static int __init init_tsc_clocksource(v
 	if (tsc_unstable)
 		goto unreg;
 
-	if (tsc_clocksource_reliable || no_tsc_watchdog)
-		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
-
 	if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
 		clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
 
@@ -1525,7 +1545,7 @@ void __init tsc_init(void)
 	}
 
 	if (tsc_clocksource_reliable || no_tsc_watchdog)
-		clocksource_tsc_early.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
+		tsc_disable_clocksource_watchdog();
 
 	clocksource_register_khz(&clocksource_tsc_early, tsc_khz);
 	detect_art();

[PATCH 5.10 119/130] x86/64/mm: Map all kernel memory into trampoline_pgd

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 51523ed1c26758de1af7e58730a656875f72f783 upstream.

The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
range of kernel memory (with 4-level paging). This range contains the
kernel's text+data+bss mappings and the module mapping space but not the
direct mapping and the vmalloc area.

This is enough to get the application processors out of real-mode, but
for code that switches back to real-mode the trampoline_pgd is missing
important parts of the address space. For example, consider this code
from arch/x86/kernel/reboot.c, function machine_real_restart() for a
64-bit kernel:

  #ifdef CONFIG_X86_32
  	load_cr3(initial_page_table);
  #else
  	write_cr3(real_mode_header->trampoline_pgd);

  	/* Exiting long mode will fail if CR4.PCIDE is set. */
  	if (boot_cpu_has(X86_FEATURE_PCID))
  		cr4_clear_bits(X86_CR4_PCIDE);
  #endif

  	/* Jump to the identity-mapped low memory code */
  #ifdef CONFIG_X86_32
  	asm volatile("jmpl *%0" : :
  		     "rm" (real_mode_header->machine_real_restart_asm),
  		     "a" (type));
  #else
  	asm volatile("ljmpl *%0" : :
  		     "m" (real_mode_header->machine_real_restart_asm),
  		     "D" (type));
  #endif

The code switches to the trampoline_pgd, which unmaps the direct mapping
and also the kernel stack. The call to cr4_clear_bits() will find no
stack and crash the machine. The real_mode_header pointer below points
into the direct mapping, and dereferencing it also causes a crash.

The reason this does not crash always is only that kernel mappings are
global and the CR3 switch does not flush those mappings. But if theses
mappings are not in the TLB already, the above code will crash before it
can jump to the real-mode stub.

Extend the trampoline_pgd to contain all kernel mappings to prevent
these crashes and to make code which runs on this page-table more
robust.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/realmode/init.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/arch/x86/realmode/init.c
+++ b/arch/x86/realmode/init.c
@@ -70,6 +70,7 @@ static void __init setup_real_mode(void)
 #ifdef CONFIG_X86_64
 	u64 *trampoline_pgd;
 	u64 efer;
+	int i;
 #endif
 
 	base = (unsigned char *)real_mode_header;
@@ -126,8 +127,17 @@ static void __init setup_real_mode(void)
 	trampoline_header->flags = 0;
 
 	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
+
+	/* Map the real mode stub as virtual == physical */
 	trampoline_pgd[0] = trampoline_pgd_entry.pgd;
-	trampoline_pgd[511] = init_top_pgt[511].pgd;
+
+	/*
+	 * Include the entirety of the kernel mapping into the trampoline
+	 * PGD.  This way, all mappings present in the normal kernel page
+	 * tables are usable while running on trampoline_pgd.
+	 */
+	for (i = pgd_index(__PAGE_OFFSET); i < PTRS_PER_PGD; i++)
+		trampoline_pgd[i] = init_top_pgt[i].pgd;
 #endif
 
 	sme_sev_setup_real_mode(trampoline_header);

[PATCH 5.10 120/130] tty: serial: msm_serial: Deactivate RX DMA for polling support

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

commit 7492ffc90fa126afb67d4392d56cb4134780194a upstream.

The CONSOLE_POLLING mode is used for tools like k(g)db. In this kind of
setup, it is often sharing a serial device with the normal system console.
This is usually no problem because the polling helpers can consume input
values directly (when in kgdb context) and the normal Linux handlers can
only consume new input values after kgdb switched back.

This is not true anymore when RX DMA is enabled for UARTDM controllers.
Single input values can no longer be received correctly. Instead following
seems to happen:

* on 1. input, some old input is read (continuously)
* on 2. input, two old inputs are read (continuously)
* on 3. input, three old input values are read (continuously)
* on 4. input, 4 previous inputs are received

This repeats then for each group of 4 input values.

This behavior changes slightly depending on what state the controller was
when the first input was received. But this makes working with kgdb
basically impossible because control messages are always corrupted when
kgdboc tries to parse them.

RX DMA should therefore be off when CONSOLE_POLLING is enabled to avoid
these kind of problems. No such problem was noticed for TX DMA.

Fixes: 99693945013a ("tty: serial: msm: Add RX DMA support")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20211113121050.7266-1-sven@narfation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/msm_serial.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -599,6 +599,9 @@ static void msm_start_rx_dma(struct msm_
 	u32 val;
 	int ret;
 
+	if (IS_ENABLED(CONFIG_CONSOLE_POLL))
+		return;
+
 	if (!dma->chan)
 		return;
 

[PATCH 5.10 121/130] serial: pl011: Add ACPI SBSA UART match id

[Greg Kroah-Hartman]

From: Pierre Gondois <Pierre.Gondois@arm.com>

commit ac442a077acf9a6bf1db4320ec0c3f303be092b3 upstream.

The document 'ACPI for Arm Components 1.0' defines the following
_HID mappings:
-'Prime cell UART (PL011)': ARMH0011
-'SBSA UART': ARMHB000

Use the sbsa-uart driver when a device is described with
the 'ARMHB000' _HID.

Note:
PL011 devices currently use the sbsa-uart driver instead of the
uart-pl011 driver. Indeed, PL011 devices are not bound to a clock
in ACPI. It is not possible to change their baudrate.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Link: https://lore.kernel.org/r/20211109172248.19061-1-Pierre.Gondois@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/amba-pl011.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2791,6 +2791,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_mat
 
 static const struct acpi_device_id sbsa_uart_acpi_match[] = {
 	{ "ARMH0011", 0 },
+	{ "ARMHB000", 0 },
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);

[PATCH 5.10 122/130] serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30

[Greg Kroah-Hartman]

From: Patrik John <patrik.john@u-blox.com>

commit b40de7469ef135161c80af0e8c462298cc5dac00 upstream.

The current implementation uses 0 as lower limit for the baud rate
tolerance for tegra20 and tegra30 chips which causes isses on UART
initialization as soon as baud rate clock is lower than required even
when within the standard UART tolerance of +/- 4%.

This fix aligns the implementation with the initial commit description
of +/- 4% tolerance for tegra chips other than tegra186 and
tegra194.

Fixes: d781ec21bae6 ("serial: tegra: report clk rate errors")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Patrik John <patrik.john@u-blox.com>
Link: https://lore.kernel.org/r/sig.19614244f8.20211123132737.88341-1-patrik.john@u-blox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial-tegra.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1501,7 +1501,7 @@ static struct tegra_uart_chip_data tegra
 	.fifo_mode_enable_status	= false,
 	.uart_max_port			= 5,
 	.max_dma_burst_bytes		= 4,
-	.error_tolerance_low_range	= 0,
+	.error_tolerance_low_range	= -4,
 	.error_tolerance_high_range	= 4,
 };
 
@@ -1512,7 +1512,7 @@ static struct tegra_uart_chip_data tegra
 	.fifo_mode_enable_status	= false,
 	.uart_max_port			= 5,
 	.max_dma_burst_bytes		= 4,
-	.error_tolerance_low_range	= 0,
+	.error_tolerance_low_range	= -4,
 	.error_tolerance_high_range	= 4,
 };
 

[PATCH 5.10 123/130] serial: core: fix transmit-buffer reset and memleak

[Greg Kroah-Hartman]

From: Johan Hovold <johan@kernel.org>

commit 00de977f9e0aa9760d9a79d1e41ff780f74e3424 upstream.

Commit 761ed4a94582 ("tty: serial_core: convert uart_close to use
tty_port_close") converted serial core to use tty_port_close() but
failed to notice that the transmit buffer still needs to be freed on
final close.

Not freeing the transmit buffer means that the buffer is no longer
cleared on next open so that any ioctl() waiting for the buffer to drain
might wait indefinitely (e.g. on termios changes) or that stale data can
end up being transmitted in case tx is restarted.

Furthermore, the buffer of any port that has been opened would leak on
driver unbind.

Note that the port lock is held when clearing the buffer pointer due to
the ldisc race worked around by commit a5ba1d95e46e ("uart: fix race
between uart_put_char() and uart_shutdown()").

Also note that the tty-port shutdown() callback is not called for
console ports so it is not strictly necessary to free the buffer page
after releasing the lock (cf. d72402145ace ("tty/serial: do not free
trasnmit buffer page under port lock")).

Link: https://lore.kernel.org/r/319321886d97c456203d5c6a576a5480d07c3478.1635781688.git.baruch@tkos.co.il
Fixes: 761ed4a94582 ("tty: serial_core: convert uart_close to use tty_port_close")
Cc: stable@vger.kernel.org      # 4.9
Cc: Rob Herring <robh@kernel.org>
Reported-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211108085431.12637-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial_core.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1576,6 +1576,7 @@ static void uart_tty_port_shutdown(struc
 {
 	struct uart_state *state = container_of(port, struct uart_state, port);
 	struct uart_port *uport = uart_port_check(state);
+	char *buf;
 
 	/*
 	 * At this point, we stop accepting input.  To do this, we
@@ -1597,8 +1598,18 @@ static void uart_tty_port_shutdown(struc
 	 */
 	tty_port_set_suspended(port, 0);
 
-	uart_change_pm(state, UART_PM_STATE_OFF);
+	/*
+	 * Free the transmit buffer.
+	 */
+	spin_lock_irq(&uport->lock);
+	buf = state->xmit.buf;
+	state->xmit.buf = NULL;
+	spin_unlock_irq(&uport->lock);
+
+	if (buf)
+		free_page((unsigned long)buf);
 
+	uart_change_pm(state, UART_PM_STATE_OFF);
 }
 
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout)

[PATCH 5.10 124/130] serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array

[Greg Kroah-Hartman]

From: Jay Dolan <jay.dolan@accesio.com>

commit c525c5d2437f93520388920baac6d9340c65d239 upstream.

Fix error in table for PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S that caused it
and PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4 to be missing their fourth port.

Fixes: 78d3820b9bd3 ("serial: 8250_pci: Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122120604.3909-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2317,11 +2317,18 @@ static struct pci_serial_quirk pci_seria
 		.setup      = pci_pericom_setup_four_at_eight,
 	},
 	{
-		.vendor     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
 		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
 		.subvendor  = PCI_ANY_ID,
 		.subdevice  = PCI_ANY_ID,
 		.setup      = pci_pericom_setup_four_at_eight,
+	},
+	{
+		.vendor     = PCI_VENDOR_ID_ACCESIO,
+		.device     = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+		.subvendor  = PCI_ANY_ID,
+		.subdevice  = PCI_ANY_ID,
+		.setup      = pci_pericom_setup_four_at_eight,
 	},
 	{
 		.vendor     = PCI_VENDOR_ID_ACCESIO,

[PATCH 5.10 125/130] serial: 8250_pci: rewrite pericom_do_set_divisor()

[Greg Kroah-Hartman]

From: Jay Dolan <jay.dolan@accesio.com>

commit bb1201d4b38ec67bd9a871cf86b0cc10f28b15b5 upstream.

Have pericom_do_set_divisor() use the uartclk instead of a hard coded
value to work with different speed crystals. Tested with 14.7456 and 24
MHz crystals.

Have pericom_do_set_divisor() always calculate the divisor rather than
call serial8250_do_set_divisor() for rates below baud_base.

Do not write registers or call serial8250_do_set_divisor() if valid
divisors could not be found.

Fixes: 6bf4e42f1d19 ("serial: 8250: Add support for higher baud rates to Pericom chips")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jay Dolan <jay.dolan@accesio.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211122120604.3909-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_pci.c |   30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1349,29 +1349,33 @@ pericom_do_set_divisor(struct uart_port
 {
 	int scr;
 	int lcr;
-	int actual_baud;
-	int tolerance;
 
-	for (scr = 5 ; scr <= 15 ; scr++) {
-		actual_baud = 921600 * 16 / scr;
-		tolerance = actual_baud / 50;
+	for (scr = 16; scr > 4; scr--) {
+		unsigned int maxrate = port->uartclk / scr;
+		unsigned int divisor = max(maxrate / baud, 1U);
+		int delta = maxrate / divisor - baud;
 
-		if ((baud < actual_baud + tolerance) &&
-			(baud > actual_baud - tolerance)) {
+		if (baud > maxrate + baud / 50)
+			continue;
 
+		if (delta > baud / 50)
+			divisor++;
+
+		if (divisor > 0xffff)
+			continue;
+
+		/* Update delta due to possible divisor change */
+		delta = maxrate / divisor - baud;
+		if (abs(delta) < baud / 50) {
 			lcr = serial_port_in(port, UART_LCR);
 			serial_port_out(port, UART_LCR, lcr | 0x80);
-
-			serial_port_out(port, UART_DLL, 1);
-			serial_port_out(port, UART_DLM, 0);
+			serial_port_out(port, UART_DLL, divisor & 0xff);
+			serial_port_out(port, UART_DLM, divisor >> 8 & 0xff);
 			serial_port_out(port, 2, 16 - scr);
 			serial_port_out(port, UART_LCR, lcr);
 			return;
-		} else if (baud > actual_baud) {
-			break;
 		}
 	}
-	serial8250_do_set_divisor(port, baud, quot, quot_frac);
 }
 static int pci_pericom_setup(struct serial_private *priv,
 		  const struct pciserial_board *board,

[PATCH 5.10 126/130] serial: 8250: Fix RTS modem control while in rs485 mode

[Greg Kroah-Hartman]

From: Lukas Wunner <lukas@wunner.de>

commit f85e04503f369b3f2be28c83fc48b74e19936ebc upstream.

Commit f45709df7731 ("serial: 8250: Don't touch RTS modem control while
in rs485 mode") sought to prevent user space from interfering with rs485
communication by ignoring a TIOCMSET ioctl() which changes RTS polarity.

It did so in serial8250_do_set_mctrl(), which turns out to be too deep
in the call stack:  When a uart_port is opened, RTS polarity is set by
the rs485-aware function uart_port_dtr_rts().  It calls down to
serial8250_do_set_mctrl() and that particular RTS polarity change should
*not* be ignored.

The user-visible result is that on 8250_omap ports which use rs485 with
inverse polarity (RTS bit in MCR register is 1 to receive, 0 to send),
a newly opened port initially sets up RTS for sending instead of
receiving.  That's because omap_8250_startup() sets the cached value
up->mcr to 0 and omap_8250_restore_regs() subsequently writes it to the
MCR register.  Due to the commit, serial8250_do_set_mctrl() preserves
that incorrect register value:

do_sys_openat2
  do_filp_open
    path_openat
      vfs_open
        do_dentry_open
	  chrdev_open
	    tty_open
	      uart_open
	        tty_port_open
		  uart_port_activate
		    uart_startup
		      uart_port_startup
		        serial8250_startup
			  omap_8250_startup # up->mcr = 0
			uart_change_speed
			  serial8250_set_termios
			    omap_8250_set_termios
			      omap_8250_restore_regs
			        serial8250_out_MCR # up->mcr written
		  tty_port_block_til_ready
		    uart_dtr_rts
		      uart_port_dtr_rts
		        serial8250_set_mctrl
			  omap8250_set_mctrl
			    serial8250_do_set_mctrl # mcr[1] = 1 ignored

Fix by intercepting RTS changes from user space in uart_tiocmset()
instead.

Link: https://lore.kernel.org/linux-serial/20211027111644.1996921-1-baocheng.su@siemens.com/
Fixes: f45709df7731 ("serial: 8250: Don't touch RTS modem control while in rs485 mode")
Cc: Chao Zeng <chao.zeng@siemens.com>
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Su Bao Cheng <baocheng.su@siemens.com>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Su Bao Cheng <baocheng.su@siemens.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/21170e622a1aaf842a50b32146008b5374b3dd1d.1637596432.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/8250/8250_port.c |    7 -------
 drivers/tty/serial/serial_core.c    |    5 +++++
 2 files changed, 5 insertions(+), 7 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2029,13 +2029,6 @@ void serial8250_do_set_mctrl(struct uart
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned char mcr;
 
-	if (port->rs485.flags & SER_RS485_ENABLED) {
-		if (serial8250_in_MCR(up) & UART_MCR_RTS)
-			mctrl |= TIOCM_RTS;
-		else
-			mctrl &= ~TIOCM_RTS;
-	}
-
 	mcr = serial8250_TIOCM_to_MCR(mctrl);
 
 	mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1102,6 +1102,11 @@ uart_tiocmset(struct tty_struct *tty, un
 		goto out;
 
 	if (!tty_io_error(tty)) {
+		if (uport->rs485.flags & SER_RS485_ENABLED) {
+			set &= ~TIOCM_RTS;
+			clear &= ~TIOCM_RTS;
+		}
+
 		uart_update_mctrl(uport, set, clear);
 		ret = 0;
 	}

[PATCH 5.10 127/130] iwlwifi: mvm: retry init flow if failed

[Greg Kroah-Hartman]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

commit 5283dd677e52af9db6fe6ad11b2f12220d519d0c upstream.

In some very rare cases the init flow may fail.  In many cases, this is
recoverable, so we can retry.  Implement a loop to retry two more times
after the first attempt failed.

This can happen in two different situations, namely during probe and
during mac80211 start.  For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c      |   22 +++++++++++++-------
 drivers/net/wireless/intel/iwlwifi/iwl-drv.h      |    3 ++
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c |   24 +++++++++++++++++++++-
 drivers/net/wireless/intel/iwlwifi/mvm/mvm.h      |    3 ++
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c      |    3 ++
 5 files changed, 47 insertions(+), 8 deletions(-)

--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1303,23 +1303,31 @@ _iwl_op_mode_start(struct iwl_drv *drv,
 	const struct iwl_op_mode_ops *ops = op->ops;
 	struct dentry *dbgfs_dir = NULL;
 	struct iwl_op_mode *op_mode = NULL;
+	int retry, max_retry = !!iwlwifi_mod_params.fw_restart * IWL_MAX_INIT_RETRY;
+
+	for (retry = 0; retry <= max_retry; retry++) {
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-	drv->dbgfs_op_mode = debugfs_create_dir(op->name,
-						drv->dbgfs_drv);
-	dbgfs_dir = drv->dbgfs_op_mode;
+		drv->dbgfs_op_mode = debugfs_create_dir(op->name,
+							drv->dbgfs_drv);
+		dbgfs_dir = drv->dbgfs_op_mode;
 #endif
 
-	op_mode = ops->start(drv->trans, drv->trans->cfg, &drv->fw, dbgfs_dir);
+		op_mode = ops->start(drv->trans, drv->trans->cfg,
+				     &drv->fw, dbgfs_dir);
+
+		if (op_mode)
+			return op_mode;
+
+		IWL_ERR(drv, "retry init count %d\n", retry);
 
 #ifdef CONFIG_IWLWIFI_DEBUGFS
-	if (!op_mode) {
 		debugfs_remove_recursive(drv->dbgfs_op_mode);
 		drv->dbgfs_op_mode = NULL;
-	}
 #endif
+	}
 
-	return op_mode;
+	return NULL;
 }
 
 static void _iwl_op_mode_stop(struct iwl_drv *drv)
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.h
@@ -144,4 +144,7 @@ void iwl_drv_stop(struct iwl_drv *drv);
 #define IWL_EXPORT_SYMBOL(sym)
 #endif
 
+/* max retry for init flow */
+#define IWL_MAX_INIT_RETRY 2
+
 #endif /* __iwl_drv_h__ */
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -71,6 +71,7 @@
 #include <net/ieee80211_radiotap.h>
 #include <net/tcp.h>
 
+#include "iwl-drv.h"
 #include "iwl-op-mode.h"
 #include "iwl-io.h"
 #include "mvm.h"
@@ -1163,9 +1164,30 @@ static int iwl_mvm_mac_start(struct ieee
 {
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	int ret;
+	int retry, max_retry = 0;
 
 	mutex_lock(&mvm->mutex);
-	ret = __iwl_mvm_mac_start(mvm);
+
+	/* we are starting the mac not in error flow, and restart is enabled */
+	if (!test_bit(IWL_MVM_STATUS_HW_RESTART_REQUESTED, &mvm->status) &&
+	    iwlwifi_mod_params.fw_restart) {
+		max_retry = IWL_MAX_INIT_RETRY;
+		/*
+		 * This will prevent mac80211 recovery flows to trigger during
+		 * init failures
+		 */
+		set_bit(IWL_MVM_STATUS_STARTING, &mvm->status);
+	}
+
+	for (retry = 0; retry <= max_retry; retry++) {
+		ret = __iwl_mvm_mac_start(mvm);
+		if (!ret)
+			break;
+
+		IWL_ERR(mvm, "mac start retry %d\n", retry);
+	}
+	clear_bit(IWL_MVM_STATUS_STARTING, &mvm->status);
+
 	mutex_unlock(&mvm->mutex);
 
 	return ret;
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h
@@ -1162,6 +1162,8 @@ struct iwl_mvm {
  * @IWL_MVM_STATUS_FIRMWARE_RUNNING: firmware is running
  * @IWL_MVM_STATUS_NEED_FLUSH_P2P: need to flush P2P bcast STA
  * @IWL_MVM_STATUS_IN_D3: in D3 (or at least about to go into it)
+ * @IWL_MVM_STATUS_STARTING: starting mac,
+ *	used to disable restart flow while in STARTING state
  */
 enum iwl_mvm_status {
 	IWL_MVM_STATUS_HW_RFKILL,
@@ -1173,6 +1175,7 @@ enum iwl_mvm_status {
 	IWL_MVM_STATUS_FIRMWARE_RUNNING,
 	IWL_MVM_STATUS_NEED_FLUSH_P2P,
 	IWL_MVM_STATUS_IN_D3,
+	IWL_MVM_STATUS_STARTING,
 };
 
 /* Keep track of completed init configuration */
--- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
@@ -1295,6 +1295,9 @@ void iwl_mvm_nic_restart(struct iwl_mvm
 	 */
 	if (!mvm->fw_restart && fw_error) {
 		iwl_fw_error_collect(&mvm->fwrt);
+	} else if (test_bit(IWL_MVM_STATUS_STARTING,
+			    &mvm->status)) {
+		IWL_ERR(mvm, "Starting mac, retry will be triggered anyway\n");
 	} else if (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
 		struct iwl_mvm_reprobe *reprobe;
 

[PATCH 5.10 128/130] parisc: Mark cr16 CPU clocksource unstable on all SMP machines

[Greg Kroah-Hartman]

From: Helge Deller <deller@gmx.de>

commit afdb4a5b1d340e4afffc65daa21cc71890d7d589 upstream.

In commit c8c3735997a3 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour.  On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c3735997a3 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/parisc/kernel/time.c |   24 +++++-------------------
 1 file changed, 5 insertions(+), 19 deletions(-)

--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -252,27 +252,13 @@ void __init time_init(void)
 static int __init init_cr16_clocksource(void)
 {
 	/*
-	 * The cr16 interval timers are not syncronized across CPUs on
-	 * different sockets, so mark them unstable and lower rating on
-	 * multi-socket SMP systems.
+	 * The cr16 interval timers are not syncronized across CPUs, even if
+	 * they share the same socket.
 	 */
 	if (num_online_cpus() > 1 && !running_on_qemu) {
-		int cpu;
-		unsigned long cpu0_loc;
-		cpu0_loc = per_cpu(cpu_data, 0).cpu_loc;
-
-		for_each_online_cpu(cpu) {
-			if (cpu == 0)
-				continue;
-			if ((cpu0_loc != 0) &&
-			    (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
-				continue;
-
-			clocksource_cr16.name = "cr16_unstable";
-			clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
-			clocksource_cr16.rating = 0;
-			break;
-		}
+		clocksource_cr16.name = "cr16_unstable";
+		clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
+		clocksource_cr16.rating = 0;
 	}
 
 	/* XXX: We may want to mark sched_clock stable here if cr16 clocks are

[PATCH 5.10 129/130] net/tls: Fix authentication failure in CCM mode

[Greg Kroah-Hartman]

From: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>

commit 5961060692f8b17cd2080620a3d27b95d2ae05ca upstream.

When the TLS cipher suite uses CCM mode, including AES CCM and
SM4 CCM, the first byte of the B0 block is flags, and the real
IV starts from the second byte. The XOR operation of the IV and
rec_seq should be skip this byte, that is, add the iv_offset.

Fixes: f295b3ae9f59 ("net/tls: Add support of AES128-CCM based ciphers")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Vakul Garg <vakul.garg@nxp.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tls/tls_sw.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -515,7 +515,7 @@ static int tls_do_encryption(struct sock
 	memcpy(&rec->iv_data[iv_offset], tls_ctx->tx.iv,
 	       prot->iv_size + prot->salt_size);
 
-	xor_iv_with_seq(prot->version, rec->iv_data, tls_ctx->tx.rec_seq);
+	xor_iv_with_seq(prot->version, rec->iv_data + iv_offset, tls_ctx->tx.rec_seq);
 
 	sge->offset += prot->prepend_size;
 	sge->length -= prot->prepend_size;
@@ -1487,7 +1487,7 @@ static int decrypt_internal(struct sock
 	else
 		memcpy(iv + iv_offset, tls_ctx->rx.iv, prot->salt_size);
 
-	xor_iv_with_seq(prot->version, iv, tls_ctx->rx.rec_seq);
+	xor_iv_with_seq(prot->version, iv + iv_offset, tls_ctx->rx.rec_seq);
 
 	/* Prepare AAD */
 	tls_make_aad(aad, rxm->full_len - prot->overhead_size +

[PATCH 5.10 130/130] ipmi: msghandler: Make symbol remove_work_wq static

[Greg Kroah-Hartman]

From: Wei Yongjun <weiyongjun1@huawei.com>

commit 5a3ba99b62d8486de0316334e72ac620d4b94fdd upstream.

The sparse tool complains as follows:

drivers/char/ipmi/ipmi_msghandler.c:194:25: warning:
 symbol 'remove_work_wq' was not declared. Should it be static?

This symbol is not used outside of ipmi_msghandler.c, so
marks it static.

Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Message-Id: <20211123083618.2366808-1-weiyongjun1@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/char/ipmi/ipmi_msghandler.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -203,7 +203,7 @@ struct ipmi_user {
 	struct work_struct remove_work;
 };
 
-struct workqueue_struct *remove_work_wq;
+static struct workqueue_struct *remove_work_wq;
 
 static struct ipmi_user *acquire_ipmi_user(struct ipmi_user *user, int *index)
 	__acquires(user->release_barrier)

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Guenter Roeck]

On 12/6/21 6:55 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 

Building i386:allyesconfig ... failed
--------------
Error log:
x86_64-linux-ld: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.o: in function `amdgpu_amdkfd_resume_iommu':
amdgpu_amdkfd.c:(.text+0x2b3): undefined reference to `kgd2kfd_resume_iommu'

Building i386:allmodconfig ... failed
--------------
Error log:
ERROR: modpost: "kgd2kfd_resume_iommu" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!

The same error is seen for alpha:allmodconfig, arm:allmodconfig,
mips:allmodconfig, parisc:allmodconfig, riscv32:allmodconfig,
riscv64:allmodconfig, s390:allmodconfig, sparc64:allmodconfig,
and xtensa:allmodconfig.

Guenter

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Florian Fainelli]

On 12/6/21 6:55 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Shuah Khan]

On 12/6/21 7:55 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Samuel Zou]

On 2021/12/6 22:55, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Built for 5.10.84-rc1, and compile failure on arm64 and x86:

Kernel repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Branch: linux-5.10.y
Version: 5.10.84-rc1
Commit: ea2293709b3cac4bdfcb88ad67605c58264608df
Compiler: gcc version 7.3.0 (GCC)

--------------------------------------------------------------------

Kernel build failed, error log:
ERROR: modpost: "kgd2kfd_resume_iommu" 
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:124: modules-only.symvers] Error 1
make[1]: *** Deleting file 'modules-only.symvers'
make: *** [Makefile:1413: modules] Error 2
make: *** Waiting for unfinished jobs....

--------------------------------------------------------------------

Tested-by: Hulk Robot <hulkrobot@huawei.com>

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Naresh Kamboju]

On Mon, 6 Dec 2021 at 20:46, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Regression found while building allmodconfig for the following arch

 - i386 (allmodconfig) with gcc-10 / gcc-11
 - mips (allmodconfig) with gcc-10 / gcc-11
 - powerpc (allmodconfig) with gcc-10 / gcc-11
 - parisc (allmodconfig) with gcc-10 / gcc-11
 - riscv (allmodconfig) with gcc-10 / gcc-11
 - sh (allmodconfig) with gcc-10 / gcc-11
 - s390 (allmodconfig) with gcc-10 / gcc-11


metadata:
  git branch: linux-5.10.y
  git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
  git commit: ea2293709b3cac4bdfcb88ad67605c58264608df
  git describe: v5.10.83-131-gea2293709b3c
  toolchain: gcc-10 / gcc-11
  kernel-config: https://builds.tuxbuild.com/21vHJb50DPJcjJuLnT8DzL6vvkn/config
  build location: https://builds.tuxbuild.com/21dB06iPvDP58giSGHdE5W3Qc68/

build error:
--------------
make --silent --keep-going --jobs=8
O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=i386
CROSS_COMPILE=i686-linux-gnu- 'CC=sccache i686-linux-gnu-gcc'
'HOSTCC=sccache gcc'
ERROR: modpost: "kgd2kfd_resume_iommu"
[drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
make[2]: *** [/builds/linux/scripts/Makefile.modpost:124:
modules-only.symvers] Error 1
make[2]: *** Deleting file 'modules-only.symvers'
make[2]: Target '__modpost' not remade because of errors.
make[1]: *** [/builds/linux/Makefile:1413: modules] Error 2

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>

step to reproduce:
------------------
tuxmake --runtime podman --target-arch i386 --toolchain gcc-11
--kconfig allmodconfig

--
Linaro LKFT
https://lkft.linaro.org

RE: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Fox Chen]

On Mon,  6 Dec 2021 15:55:17 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.10.84-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Greg Kroah-Hartman]

On Mon, Dec 06, 2021 at 08:46:58AM -0800, Guenter Roeck wrote:
> On 12/6/21 6:55 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.84 release.
> > There are 130 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> > Anything received after that time might be too late.
> > 
> 
> Building i386:allyesconfig ... failed
> --------------
> Error log:
> x86_64-linux-ld: drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.o: in function `amdgpu_amdkfd_resume_iommu':
> amdgpu_amdkfd.c:(.text+0x2b3): undefined reference to `kgd2kfd_resume_iommu'
> 
> Building i386:allmodconfig ... failed
> --------------
> Error log:
> ERROR: modpost: "kgd2kfd_resume_iommu" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
> 
> The same error is seen for alpha:allmodconfig, arm:allmodconfig,
> mips:allmodconfig, parisc:allmodconfig, riscv32:allmodconfig,
> riscv64:allmodconfig, s390:allmodconfig, sparc64:allmodconfig,
> and xtensa:allmodconfig.

Thanks for the report, should be fixed in -rc2

greg k-h

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Greg Kroah-Hartman]

On Tue, Dec 07, 2021 at 10:17:40AM +0800, Samuel Zou wrote:
> 
> 
> On 2021/12/6 22:55, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.84 release.
> > There are 130 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Built for 5.10.84-rc1, and compile failure on arm64 and x86:
> 
> Kernel repo:
> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Branch: linux-5.10.y
> Version: 5.10.84-rc1
> Commit: ea2293709b3cac4bdfcb88ad67605c58264608df
> Compiler: gcc version 7.3.0 (GCC)
> 
> --------------------------------------------------------------------
> 
> Kernel build failed, error log:
> ERROR: modpost: "kgd2kfd_resume_iommu"
> [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
> make[1]: *** [scripts/Makefile.modpost:124: modules-only.symvers] Error 1
> make[1]: *** Deleting file 'modules-only.symvers'
> make: *** [Makefile:1413: modules] Error 2
> make: *** Waiting for unfinished jobs....
> 
> --------------------------------------------------------------------
> 
> Tested-by: Hulk Robot <hulkrobot@huawei.com>


Thanks for the report, should be fixed in -rc2

greg k-h

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Greg Kroah-Hartman]

On Tue, Dec 07, 2021 at 08:07:11AM +0530, Naresh Kamboju wrote:
> On Mon, 6 Dec 2021 at 20:46, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > This is the start of the stable review cycle for the 5.10.84 release.
> > There are 130 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Regression found while building allmodconfig for the following arch
> 
>  - i386 (allmodconfig) with gcc-10 / gcc-11
>  - mips (allmodconfig) with gcc-10 / gcc-11
>  - powerpc (allmodconfig) with gcc-10 / gcc-11
>  - parisc (allmodconfig) with gcc-10 / gcc-11
>  - riscv (allmodconfig) with gcc-10 / gcc-11
>  - sh (allmodconfig) with gcc-10 / gcc-11
>  - s390 (allmodconfig) with gcc-10 / gcc-11
> 
> 
> metadata:
>   git branch: linux-5.10.y
>   git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>   git commit: ea2293709b3cac4bdfcb88ad67605c58264608df
>   git describe: v5.10.83-131-gea2293709b3c
>   toolchain: gcc-10 / gcc-11
>   kernel-config: https://builds.tuxbuild.com/21vHJb50DPJcjJuLnT8DzL6vvkn/config
>   build location: https://builds.tuxbuild.com/21dB06iPvDP58giSGHdE5W3Qc68/
> 
> build error:
> --------------
> make --silent --keep-going --jobs=8
> O=/home/tuxbuild/.cache/tuxmake/builds/current ARCH=i386
> CROSS_COMPILE=i686-linux-gnu- 'CC=sccache i686-linux-gnu-gcc'
> 'HOSTCC=sccache gcc'
> ERROR: modpost: "kgd2kfd_resume_iommu"
> [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined!
> make[2]: *** [/builds/linux/scripts/Makefile.modpost:124:
> modules-only.symvers] Error 1
> make[2]: *** Deleting file 'modules-only.symvers'
> make[2]: Target '__modpost' not remade because of errors.
> make[1]: *** [/builds/linux/Makefile:1413: modules] Error 2
> 
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
> 
> step to reproduce:
> ------------------
> tuxmake --runtime podman --target-arch i386 --toolchain gcc-11
> --kconfig allmodconfig
> 
> --
> Linaro LKFT
> https://lkft.linaro.org


Thanks for the report, should be fixed in -rc2

greg k-h

Re: [PATCH 5.10 000/130] 5.10.84-rc1 review

[Jon Hunter]

On Mon, 06 Dec 2021 15:55:17 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.84 release.
> There are 130 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 08 Dec 2021 14:55:37 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.84-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.10:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    75 tests:	75 pass, 0 fail

Linux version:	5.10.84-rc1-gea2293709b3c
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon