From: Baoquan He <bhe@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org, akpm@linux-foundation.org, hch@lst.de,
cl@linux.com, John.p.donnelly@oracle.com,
kexec@lists.infradead.org, bhe@redhat.com,
stable@vger.kernel.org, Pekka Enberg <penberg@kernel.org>,
David Rientjes <rientjes@google.com>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>,
Vlastimil Babka <vbabka@suse.cz>
Subject: [PATCH v3 5/5] mm/slub: do not create dma-kmalloc if no managed pages in DMA zone
Date: Mon, 13 Dec 2021 20:27:12 +0800 [thread overview]
Message-ID: <20211213122712.23805-6-bhe@redhat.com> (raw)
In-Reply-To: <20211213122712.23805-1-bhe@redhat.com>
Dma-kmalloc will be created as long as CONFIG_ZONE_DMA is enabled.
However, it will fail if DMA zone has no managed pages. The failure
can be seen in kdump kernel of x86_64 as below:
CPU: 0 PID: 65 Comm: kworker/u2:1 Not tainted 5.14.0-rc2+ #9
Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS RMLSDP.86I.R2.28.D690.1306271008 06/27/2013
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack_lvl+0x57/0x72
warn_alloc.cold+0x72/0xd6
__alloc_pages_slowpath.constprop.0+0xf56/0xf70
__alloc_pages+0x23b/0x2b0
allocate_slab+0x406/0x630
___slab_alloc+0x4b1/0x7e0
? sr_probe+0x200/0x600
? lock_acquire+0xc4/0x2e0
? fs_reclaim_acquire+0x4d/0xe0
? lock_is_held_type+0xa7/0x120
? sr_probe+0x200/0x600
? __slab_alloc+0x67/0x90
__slab_alloc+0x67/0x90
? sr_probe+0x200/0x600
? sr_probe+0x200/0x600
kmem_cache_alloc_trace+0x259/0x270
sr_probe+0x200/0x600
......
bus_probe_device+0x9f/0xb0
device_add+0x3d2/0x970
......
__scsi_add_device+0xea/0x100
ata_scsi_scan_host+0x97/0x1d0
async_run_entry_fn+0x30/0x130
process_one_work+0x2b0/0x5c0
worker_thread+0x55/0x3c0
? process_one_work+0x5c0/0x5c0
kthread+0x149/0x170
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
Mem-Info:
......
The above failure happened when calling kmalloc() to allocate buffer with
GFP_DMA. It requests to allocate slab page from DMA zone while no managed
pages in there.
sr_probe()
--> get_capabilities()
--> buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
The DMA zone should be checked if it has managed pages, then try to create
dma-kmalloc.
Fixes: 6f599d84231f ("x86/kdump: Always reserve the low 1M when the crashkernel option is specified")
Cc: stable@vger.kernel.org
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
---
mm/slab_common.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/mm/slab_common.c b/mm/slab_common.c
index e5d080a93009..ae4ef0f8903a 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -878,6 +878,9 @@ void __init create_kmalloc_caches(slab_flags_t flags)
{
int i;
enum kmalloc_cache_type type;
+#ifdef CONFIG_ZONE_DMA
+ bool managed_dma;
+#endif
/*
* Including KMALLOC_CGROUP if CONFIG_MEMCG_KMEM defined
@@ -905,10 +908,16 @@ void __init create_kmalloc_caches(slab_flags_t flags)
slab_state = UP;
#ifdef CONFIG_ZONE_DMA
+ managed_dma = has_managed_dma();
+
for (i = 0; i <= KMALLOC_SHIFT_HIGH; i++) {
struct kmem_cache *s = kmalloc_caches[KMALLOC_NORMAL][i];
if (s) {
+ if (!managed_dma) {
+ kmalloc_caches[KMALLOC_DMA][i] = kmalloc_caches[KMALLOC_NORMAL][i];
+ continue;
+ }
kmalloc_caches[KMALLOC_DMA][i] = create_kmalloc_cache(
kmalloc_info[i].name[KMALLOC_DMA],
kmalloc_info[i].size,
--
2.17.2
next prev parent reply other threads:[~2021-12-13 12:28 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20211213122712.23805-1-bhe@redhat.com>
2021-12-13 12:27 ` [PATCH v3 3/5] mm_zone: add function to check if managed dma zone exists Baoquan He
2021-12-13 14:22 ` john.p.donnelly
2021-12-16 10:52 ` David Hildenbrand
2021-12-13 12:27 ` [PATCH v3 4/5] dma/pool: create dma atomic pool only if dma zone has managed pages Baoquan He
2021-12-13 14:23 ` john.p.donnelly
2021-12-13 12:27 ` Baoquan He [this message]
2021-12-13 13:43 ` [PATCH v3 5/5] mm/slub: do not create dma-kmalloc if no managed pages in DMA zone Hyeonggon Yoo
2021-12-14 5:32 ` Baoquan He
2021-12-14 10:09 ` Vlastimil Babka
2021-12-14 10:28 ` Christoph Lameter
2021-12-15 4:48 ` Hyeonggon Yoo
2021-12-15 7:03 ` Hyeonggon Yoo
2021-12-15 7:27 ` Christoph Hellwig
2021-12-15 10:34 ` Vlastimil Babka
2021-12-15 11:51 ` David Laight
2021-12-15 13:41 ` Baoquan He
2021-12-17 11:38 ` Hyeonggon Yoo
2021-12-20 7:32 ` Baoquan He
2022-01-07 11:56 ` Hyeonggon Yoo
2021-12-15 14:42 ` Baoquan He
2021-12-15 10:08 ` Baoquan He
2021-12-17 11:38 ` Hyeonggon Yoo
2021-12-21 8:56 ` Christoph Hellwig
2021-12-22 12:37 ` Hyeonggon Yoo
2021-12-23 8:52 ` Christoph Hellwig
2021-12-13 14:24 ` john.p.donnelly
2021-12-14 16:31 ` Christoph Hellwig
2021-12-14 17:07 ` john.p.donnelly
2021-12-15 7:27 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211213122712.23805-6-bhe@redhat.com \
--to=bhe@redhat.com \
--cc=John.p.donnelly@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=cl@linux.com \
--cc=hch@lst.de \
--cc=iamjoonsoo.kim@lge.com \
--cc=kexec@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=penberg@kernel.org \
--cc=rientjes@google.com \
--cc=stable@vger.kernel.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).